Mirra 2 certification
|
|
- Brooke Wilkins
- 5 years ago
- Views:
Transcription
1 Mirra 2 certification Standards DIN EN : 2000 Office furniture. Office work chair. Dimensions. Determination of dimensions DIN EN :2009 Office furniture. Office work chair. Safety requirements DIN EN :2009 Office furniture. Office work chair. Safety test methods ZEK Polycyclic aromatic hydrocarbons (PAH) GS Geprüfte Sicherheit ( Tested Safety ) BS A2: 2008 Specification for performance requirements and tests for office furniture. Office pedestal seating for use by persons weighing up to 150 kilos and for use up to 24 hours a day, including type-approval tests for individual components BS EN ISO :1999 Ergonomic requirements for office work with visual display terminals (VDTs) Part 5: Workstation layout and postural requirements FIRA Ergonomics Excellence Award Herman Miller Ltd (VillageGreen) Methuen Park Chippenham SN14 0GF UK issue date: February 2015
2 CERTIFICATE Product Service No. Z1A Holder of Certificate: Herman Miller Ltd. Turnpike Business Park Chippenham SN14 OGF UNITED KINGDOM Factory(ies): Certification Mark: Product: Model(s): Parameters: Swivel Chairs Mirra 2 With following settings: Arm rest adjustment, tilt limiter, inclination angle of the seat forward, height and depth in the lumbar region, seat depth, tilt tension, seat height. The office swivel chair system Mirra 2 is modular built and has a multitude of combinations. Mirra 2 correspond to the type C of DIN EN :2002. For more information, see attachment. Tested according to: DIN EN :2002 DIN EN :2010 DIN EN :2009 BS EN :2000 BS EN :2009 BS EN :2009 ZEK The product meets the safety and health requirements of the German Product Safety Act section 20 to 22 ProdSG. The certification marks shown above can be affixed on the product. It is not permitted to alter the certification marks in any way. In addition the certificate holder must not transfer the certificate to third parties. This certificate is valid until the listed date, unless it is cancelled earlier. See also notes overleaf. Test report no.: ~ Valid until: ' Date, Rev TUV SUD Product Service GmbH Zertifizierstelle Ridlerstra~e MUnchen Germany 873E
3 Product Service Technical Report No Rev. 00 Dated Choose certainty. Add value. Client: Herman Miller Ltd. GB-SN14 OGF Chippenham Manufacturing place Herman Miller Ltd. Logistics & Distribution Centre Herman Miller Industrial Estate Bath Road GB-Chippenham SN14 OAT Test subject: Product: Office chair Type: MIRRA 2 Testspecification: DIN EN ISO :1999 BS EN ISO :1999 Purpose of examination: Test according to the test specification Test result: The test results show that the presented product is in compliance with the specified requirements. This technical report may only be quoted in full. Any use for advertising purposes must be granted in writing. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. File: TR_E.docx Rep.-No Revision: 00 Project Manager: Levke Koch Date: Phone: Fax: levke.koch@tuev-sued.de TUV TOV SOD Product Service GmbH Hamburg Branch Sylvesterallee Hamburg Germany 874
4 CERTIFICATE No. Product Service Z Holder of Certificate: Herman Miller Ltd. Turnpike Business Park Chippenham SN14 OGF UNITED KINGDOM Production Facility(ies): Certification Mark: Product: Swivel Chairs Model(s): MIRRA 2: MRF133AWAFAJ6KABBDTR8M25631A707 MRF133AWAFAJG1GFG18M17BK1A703 Parameters: With following settings: Arm rest adjustment, tilt limiter, inclination angle of the seat forward, height and depth in the lumbar region, seat depth, tilt tension, seat height. The office swivel chair system Mirra 2 is modular built and has a multitude of combinations. For more information, see attachment. Tested according to: ss /A2:2008 The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf. Test report no.: Valid until: Date, TOV SOD Product Service GmbH Zertifizierstelle RidlerstraBe Munchen Germany 872E
5 891
Lukas Hydraulik GmbH. Weinstr Erlangen GERMANY 23184, Nominal pressure: Further parameters see attachment 1-12
CERTIFICATE No. Z2 17 03 23184 032 Holder of Certificate: Lukas Hydraulik GmbH Weinstr. 39 91058 Erlangen GERMANY Production Facility(ies): 23184,68434 Certification Mark: Product: Hydraulic appliances,
More informationKlöber Cato/Cato Plus Operating instructions. Sitting better.
Klöber Cato/Cato Plus Operating instructions Sitting better. 1. 3. 4. 2. 5. 2 8. cat99/ cpl99 7. 6. 3 4 1. Seat height adjustment The seat height of your swivel chair can be continuously adjusted using
More informationKlöber Orbit Orbit Network Operating instructions
Klöber Orbit Orbit Network Operating instructions 1. 6. 5. 2. 2 7. 4. 3. 3 4 1. Seat height adjustment The seat height of your swivel chair can be steplessly adjusted using a gas spring. To adjust the
More informationPrinciple Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK
-GB-2017-01: Defining the requirements for a GS mark approval Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act about
More informationTokyo BILD., Marunouchi, Chiyoda-ku Tokyo JAPAN. Industrial Robot
EC-Statement of Compliance No. E6 9 7 25554 18 Product Service Holder of Certificate: Mitsubishi Electric Corporation Tokyo BILD., 2-7-3 Marunouchi, Chiyoda-ku Tokyo 1-831 JAPAN Name of Object: Industrial
More informationEC type-examination of SITEMA Safety Brakes by DGUV Test
EC type-examination of SITEMA Safety Brakes by DGUV Test After thorough examination, the testing and certification body of the DGUV (German Statutory Accident Insurance) has issued the EC type-examination
More informationVIDA. Goole. Tel. +44 (0) EC1M 4NQ. Tel. +44 (0)
VIDA Goole Tel. +44 (0)140 746000 EC1M 4NQ Tel. +44 (0)20 7490 4909 Design The English translation of the Spanish word Vida - 1 2 User Controls Vida s design is clean, crisp and uncluttered. All of the
More informationInvacare. Simply the best fit!
Simply the best fit! The revolutionary power wheelchair has been created to satisfy even the most demanding requirements regarding configurability, adaptability and functionality. Not only is it stylish
More informationLightUp. Christopher Schmidt Product Designer, ITO Design
LightUp LightUp Most design processes involve balancing compromises. A multitude of different requirements have to be brought in line and not every idea can be realized. What s so remarkable about LightUp
More informationIn 1919, Giroflex created the world s first swivel office chair.
64 G64 INTRODUCTION In 1919, Giroflex created the world s first swivel office chair. In 1928, Giroflex designed the world s first sprung swivel office chair. Giroflex has built an international reputation
More informationBasic Task (B) Chair Adjustment Information
Basic Task (B) Adjustable back depth For custom lumbar support. To adjust, turn handwheel left to loosen. Move the back in or out to the desired depth, then turn handwheel to the right to tighten. Swivel
More informationThe Scala Ladder System Leaning Ladders - Sliding Ladders - Hook-on Ladders 7.1
The Scala Ladder System Leaning Ladders - Sliding Ladders - Hook-on Ladders : 7.1 The Scala ladder system Leaning Ladders - Sliding Ladders - Hook-on Ladders Our high quality, stainless steel ladders are
More informationAquatec. Ocean Family. Flexible, modular shower chair commode solutions
Aquatec Ocean Family Flexible, modular shower chair commode solutions A range of high quality, modular, stainless steel shower chair commodes that are designed to support a wide range of clients and conditions.
More informationPersonalised comfort: affordable luxury. Enjoy
Personalised comfort: affordable luxury Enjoy Enjoy The Enjoy range brings extraordinary economy to luxury seating. Sharing many of the features of the top-range Ergohuman models, the Enjoy office chair
More informationChristopher Schmidt Product Designer, ITO Design
LightUp Most design processes involve balancing compromises. A multitude of different requirements have to be brought in line and not every idea can be realized. What s so remarkable about LightUp is how
More informationListe der verwendeten Prüfmittel List of used test equipment
rodukte roducts rüfbericht-nr.: 21254500_001 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.
More informationErgoDesign. Industrial and Welding Products. Ergonomic Solutions for Workers
ErgoDesign Industrial and Welding Products Ergonomic Solutions for Workers Industrial Products STOOLS AND CHAIRS Comfort and Durability Innovative and durable products, designed for your work environment
More informationERGOHUMAN ADVANCED ENGINEERING
1 1 3 ADVANCED ENGINEERING The Ergohuman Plus takes our top selling chair to new levels, with more aluminium detailing, a seat tilt function and an organically formed base, the Ergohuman Plus is the ideal
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationCelle TM chairs. uk 149 Tottenham Court Road London w1t 7ja t (+44) f (+44)
uk 149 Tottenham Court Road London w1t 7ja t (+44) 0845 226 7202 f (+44) 0845 430 9260 Turnpike Business Park Chippenham sn14 0gf t (+44) 0845 226 7201 f (+44) 0845 226 9250 e info_uk@hermanmiller.com
More informationAquatec Ocean Family. Ocean Family. Aquatec
The Ocean series of shower commode chairs offers a flexible, modular solution for a wide range of clients. The range consists of transit, self-propel, tilt in space as well as powered tilt and recline
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing
More informationWhat You Need To Know About Ordering Furniture
Furniture 123 What You Need To Know About Ordering Furniture Order Carefully! Please take extra care when placing your order and be sure to confirm the colour, dimensions, configuration and details of
More informationWhy Designed by Roger Webb Associates Product Guide.
Why Designed by Roger Webb Associates Product Guide www. 2 Why Why Why is an ergonomically designed task chair with a distinctive, contemporary style. All Why chairs have a self-adjusting synchronised
More informationTechnical Report No D Dated
Client: Innokin Technology Co.,Ltd Address: Attn.: Building 6,XinXinTian Industrial Park, XinSha Road, ShaJing street,shenzhen, China George Sample Description: itaste 134 MX-M Model No.: / Contury of
More informationTokyo SILO., Marunouchi, Chiyoda-ku Tokyo JAPAN. Rated Voltage: Rated Power: Protection Class:
EC-Statement of Compliance No. E6 09 07 25554 017 Holder of Certificate: Name of Object: Model(s): Mitsubishi Electric Corporation Tokyo SILO., 2-7-3 Marunouchi, Chiyoda-ku Tokyo 1 00-831 0 JAPAN Industrial
More informationLloyd s Register Type Approval System Test Specification Number GT04
Lloyd s Register Type Approval System Test Specification Number GT04 Gas Turbines Performance and test specifications for Gas Turbines to be used in Marine, Offshore and Industrial Applications 2004 Lloyd's
More informationTask Seating. Technical Document. Full statement of line including model codes, up charges and standards.
Task Seating Technical Document Full statement of line including model codes, up charges and standards. As shared work-spaces become increasingly common, office environments need to be more versatile than
More informationQuality and sustainability. Inspection and testing, approvals, certificates
Quality and sustainability Inspection and testing, approvals, certificates Evidence of highest quality standards On the following pages, you will find all relevant details of our testing systems, approvals
More informationInspirational luxury: revolutionary seating. Nefil
Inspirational luxury: revolutionary seating Nefil Nefil The future is Nefil - from the manufacturer of Ergohuman - designed and made with the total comfort of human-kind in mind. The materials used to
More informationApproval of SITEMA Safety Catchers for use as a mechanical restraint device in presses.
of SITEMA Safety Catchers for use as a mechanical restraint device in presses. The European Standard DIN EN 693 Machine tools - Safety - Presses ascertains the following facts: Where there is a risk of
More informationMotto. Designed by: Profim
Motto Motto Designed by: Profim Add a splash of colour to your office. Motto is a fully upholstered, ergonomic swivel chair with elegant lines. Fabric on the back support makes it perfect for working in
More informationAzalea Family. One big family
Azalea Family One big family Rea Azalea Family Invacare Rea Passive chairs offer the perfect fit and comfort, with a wide selection of models, options and compatibility across the Family. For customers
More informationCertificate: / 22 March 2013
Test report: 936/21215448/A of 11 October 2012 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.4 Approved application The tested
More informationIn Form Group. Your reliable provider of automotive services. In Form Group
Your reliable provider of automotive services About In Form Founded in 2006 in Mannheim, Germany Headquarters in Walldorf, Germany Subsidiaries in Switzerland and Slovakia Key activities: Hail damage repair
More informationDynamic Blade. Design Awards & Ergonomic Assessments
Dynamic Blade Design Awards & Ergonomic Assessments ERGONOMIC ASSESSMENT 1 ADJUSTABILITY The best, top notch! It is modular and has two clear adjustments: one vertical in the front and another vertical
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) TO A COMPONENT TYPE- APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE
More informationBMA 24/7 and industry chairs. Ergonomic Comfortable Robust Sustainable
BMA 24/7 and industry chairs Ergonomic Comfortable Robust Sustainable OBSERVATION & MONITORING VDU WORK COMBINED TASKS Comfortable and ergonomic Extra thick ergonomically shaped cushions Controls for both
More informationF94 TASK PERFORMANCE SEATING
F94 TASK PERFORMANCE SEATING HOOd SEATING ARE PASSIONATE AbOuT your HEALTH ANd WELL-bEING. WE bring you OuR unique ERGONOMIC ANd INTuITIVE TASK SEATING RANGE. F94 PERFORMANCE SEATING F94 PHILOSOPHY WE
More informationsaberda ynespos turetask
saberda ynespos turetask saberda ynespos turetask Saber Daynes as a distributor of Office Seating, have selected ranges from UK and European manufacturers that offer outstanding ergonomic solutions, stunning
More informationSociable, reliable, attractive: the newbie liked by everyone.
Swivel chairs se:do Sociable, reliable, attractive: the newbie liked by everyone. People are different. People come in all shapes and sizes with diverse preferences. Modern forms of work such as smart
More informationCertification Scheme
Certification Scheme Water-based surface-embedded heating and cooling systems in accordance with DIN EN 1264 (Version: November 2009) DIN CERTCO Alboinstraße 56 12103 Berlin Tel: +49 30 7562-1131 Fax:
More informationEFIT. By Alegre Design.
By Alegre Design FEATURES AUTO-WEIGHT SYNCHRO CONTROL Synchro mechanism auto-weight control, it adapts automatically to the user s weight. In order to adjust and adapt the tension to each user s requirement
More informationListe der verwendeten Prüfmittel List of used test equipment
rodukte roducts rüfbericht-nr.: 21203523_002 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.
More informationMaterial Specification Note: Products may vary slightly from equipment shown in pictures
Client: Contact: Material Specification Note: Products may vary slightly from equipment shown in pictures Sly Filters RPF Rotary Pre-filter Unit The Sly Filters rotary pre-filter unit is used as a part
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. UL 2528 Cathy Ln Jasper, IN Brian Truelove Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL 2528 Cathy Ln Jasper, IN 47546 Brian Truelove Phone: 812 556 5094 MECHANICAL Valid To: July 31, 2018 Certificate Number: 2709.03 In recognition of the successful
More informationSolutions for manufacturers. Thomas Neuhaus
Solutions for manufacturers Thomas Neuhaus from 1.1.2016: Head of the VOC certification body at Eurofins Consumer Product Testing GmbH, Hamburg / Germany 1 VOC emissions testing Which tests do I need?
More informationInspection Services Design Appraisal Document
Issue Number: 1 Page 1 of 5 Client : Groth Corporation Subject : Pressure / Vacuum Relief Valves Model Series 1200, 1300, 1400, 1600, 1700 & 1800 Pressure Equipment Type : Safety Accessory PED Category
More informationbott vario Professional vehicle equipment for your Peugeot Bipper Partner Expert Boxer
bott vario Professional vehicle equipment for your Peugeot Bipper Partner Expert Boxer bott vario Feel at home in your Peugeot 2 You ve decided to get a Peugeot. In taking this decision you have created
More informationRayleigh Instruments Ltd Raytel House Brook Road Rayleigh Essex SS6 7XH United Kingdom
EC Type Examination Certificate Number: Rayleigh Instruments Ltd Raytel House Brook Road Rayleigh Essex SS6 7XH United Kingdom Instrument Identification: Single Phase, Active Import/Export, Electricity
More informationErgonomic Product Catalog Task Chairs
Ergonomic Product Catalog Task Chairs Chairs Note: (all chairs are configured in black fabric). Description Image Bodybilt J757 Model #: J757-SFS-N1 Fabric: COMFORTEK - CARBON (contact vendor for other
More informationTranslation of the Original operating instructions Lifting device Z 70 /...
Translation of the Original operating instructions Lifting device Z 70 /... Content 1. Lifting device / Correct use according to regulations 2. Basic principles 3. General information 4. Special remarks
More informationbott vario Professional vehicle equipment for your Mercedes-Benz Estate cars Vito Sprinter
bott vario Professional vehicle equipment for your Mercedes-Benz Estate cars Vito Sprinter bott vario Feel at home in your Mercedes-Benz 2 You ve decided to get a Mercedes-Benz. In taking this decision
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2014-04-01 Issue No.: 4 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Additional Manufacturing
More informationLength: 895 mm Width: 1355 mm Height: 705 mm
HAY/Nine United Denmark A/S Havnen 1 DK-8700 Horsens Page 1 of 1 Appendices 3 Initials laha/prni/hbs Test Report Material: Model: Palissade Lounge Sofa also covers Palissade Lounge Chair High and Palissade
More informationSTAY. By Alegre Design.
By Alegre Design Technical Profile FEATURES AUTO-WEIGHT SYNCHRO CONTROL Synchro mechanism auto-weight control, it adapts automatically to the user weight. In order to adjust and customize the tension to
More informationEC Type-Approval Certificate UK 2655 Revision 2
UK 2655 V(0)a EC Type-Approval Certificate UK 2655 Revision 2 Issued by: National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Non-automatic Weighing Instruments
More informationOffice Seating. Designed for office work. Office Seating
Office Seating Designed for office work Office Seating Office Seating KAB Seating is part of the American owned CVG group of companies with operating subsidiaries in the UK, Belgium, Australia, China and
More informationCaper Chairs 1 Technical Specifications. Caper Chairs
Caper Chairs 1 Technical Specifications Caper Chairs Caper Chairs 2 Performance Information Performance Information 3 Methodology and Dimension Description 4 ing Measurements 6 Multipurpose Chair 10 Stacking
More informationERGOHUMAN ADVANCED ENGINEERING
1 ERGOHUMAN 2 2 3 ADVANCED ENGINEERING The Ergohuman chair is a perfect fusion of art and science, with flex zones that ensure constant support of back and lumbar, multi-dimensional adjustable arm rests
More informationOperator & Safety Manual
Operator & Safety Manual Keep this manual with machine at all times. Model 6036 S/N 9B0499 & Before 8990149 Revised February 18, 2005 WARNING IMPROPER OPERATION OF THIS VEHICLE CAN CAUSE INJURY OR DEATH.
More informationINSTALLATION/USERS MANUAL
INSTALLATION/USERS MANUAL ! IMPORTANT: The installation and set up instructions should be carried out by a qualified technician. IMPORTANT: It is important to refer to the wheelchair owner s manual for
More informationHealthy sitting reduces work absences. Ergonomic and healthy sitting on the job greatly enhances employee performance.
58 MPS 4.0 Swivel work chairs 3 842 538 281 (2011.04) Healthy sitting reduces work absences Ergonomic and healthy sitting on the job greatly enhances employee performance. 3 842 538 281 (2011.04) Swivel
More informationTask Chair Collection
Task Chair Collection Boss Design Group The Boss Design Group is the UK s market leading manufacturer of high quality office seating, upholstery and tables, and enjoys global success within this design-led
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: A-14136 File No: 899.60 Job Id: 262.1-018818-1 This is to certify: That the Peripheral Equipment with type designation(s) Ha-VIS econ 2000 series, econ 3000 series
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG
More informationPIETRANERA.COM PIETRANERA NEWS
PIETRANERA.COM PIETRANERA NEWS 1 DESIGN AND FUNCTIONALITY AT AN ACCESSIBLE PRICE Every day for the past 60 years, Pietranera has designed and built handmade unique products through experience and with
More informationInstant comfort anywhere
z Cosm Y Instant comfort anywhere Cosm Chair by Herman Miller Designed by Studio 7.5 Sit in Cosm, and you just might forget you re sitting in a chair at all. Its sophisticated ergonomic design sets a new
More informationWR series. WR 200 WR 200 i WR 240 WR 240 i WR 250
Technische Technical specification Daten Kaltfräse Cold Recycler W 200 and Soil Stabilizer WR series WR 200 WR 200 i WR 240 WR 240 i WR 250 Technical specifi cation WR 200 Cold recycler and soil stabilizer
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. UL 3480 Windquest Drive Holland, MI Dan Kolean Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL 3480 Windquest Drive Holland, MI 49424 Dan Kolean Phone: 616 928 0791 MECHANICAL Valid To: July 31, 2018 Certificate Number: 2709.01 In recognition of the
More informationAccessories and workbenches
Permanent contact The permanent-contact follows the movements of the body and enables the natural stressing and relieving of different muscle and spinal areas. Synchronous mechanism The user-friendly synchronous
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY EU TYPE-APPROVAL CERTIFICATE
Communication concerning: EU type-approval extension of EU type-approval refusal of EU type-approval withdrawal of EU type-approval THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY EU TYPE-APPROVAL CERTIFICATE
More informatione fix Power add-on drive
e fix Power add-on drive APPROVED MEDICAL PRODUCT Small. Light. Swift. Experience mobility pure and simple Enjoy a new degree of mobility With e-fix, the electrical add-on drive for your wheelchair, you
More informationMirra Chairs MIRRAbrochure_20pg_v2.indd 1 07/09/ :19
The Mirra chair. Natural. Effortless comfort and ergonomic support. Friendly. Colourful, versatile and easy to use. Responsible. A model for sustainable design. Total back support. Many of Mirra s adjustments
More informationFour Us Booth. Models. Design: Anders Nørgaard
Four Us Booth is everything from a classic sofa to an innovative modular Zoning system. It creates a place for you with the best conditions for interacting. With Four Us you get a room with better acoustic,
More informationfitz architectural products
www.teknion.com in the usa: 350 fellowship road mt laurel, new jersey 08054 usa tel 877.teknion fax 856.552.5088 e-mail info.us@teknion.com in canada: ii50 flint road toronto, ontario m3j 2j5 canada tel
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2014-0152R1 Issued: 02 March 2018 EASA AD No.: 2014-0152R1 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008
More informationTechnical Data Sheet TI-F55 Locking Units series KFHS (with DGUV approval)
English translation of German original Technical Data Sheet TI-F55 Locking Units series KFHS (with DGUV approval) For a detailed functional description refer to Technical Information TI-F10. Further important
More information30-Aug-11. VCA job number: CSM Date: 30 August Dear Sirs,
VCA job number: CSM241075 Date: 30 August 2011 Dear Sirs, 1. The vehicle type / component described on the attached approval(s) has been tested and meets the requirements of the ECE Regulation / EEC Directive
More informationrh logic 400/300 The neckrest can be adjusted by height and depth, providing support for the neck and comfort for the rest of the body.
rh logic 400/300 The RH Logic 400/300 is one of our most popular chair ranges thanks to its ergonomic features and outstanding durability. The RH Logic 400 has a high back, the RH Logic 300 a lower back.
More informationSPV Series Slides OPERATING MANUAL. Table of contents 1 Introduction Compliance with the EC Directives Names of parts...
HL-17012 SPV Series Slides OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures. Please read this Operating Manual and the separate
More informationJiangsu Zeversolar New Energy CO.LTD Building 9 No.198, Xiangyang Road, Suzhou, PEOPLE'S RE- PUBLIC OF CHINA
Technical Report No. F.3 Requirements for the test report for power generation units F.4 Requirements for the test report for the NS protection Dated Client: Manufacturing
More informationUniprep 2 Rotary scraping tool for pipes mm
Operating instructions and specifications for Uniprep 2 Rotary scraping tool for pipes 125-500mm Products by innovation not imitation Helping you make the right connections Models covered by this manual:
More informationForest Stewardship Council. Trademark Quick Guide for Certificate Holders
Forest Stewardship Council Trademark Quick Guide for Certificate Holders About FSC trademarks and this quick guide The FSC trademarks are the primary communication tool for FSC certificate holders to demonstrate
More informationMOVY is3 : The end of class barriers. Concept 03
MOVYis3 Concept 03 MOVY is3 : The end of class barriers MOVYis3 stands for the kind of sitting comfort you only enjoy in first class. Like every other interstuhl chair, its design, function and ergonomics
More informationGemeinschaft Thermisches Spritzen
Gemeinschaft Thermisches Spritzen Quality Management for Thermal Spraying GTSPA002 GTS Certificate Guideline May 2012 Gemeinschaft Thermisches Spritzen e. V. Association of Thermal Sprayers GTSPA002 Status:
More informationSupra X TM. Supra X is the next generation of Supra, a comfortable and affordable ergonomic seating series designed with a contemporary appearance.
Supra X TM Supra X is the next generation of Supra, a comfortable and affordable ergonomic seating series designed with a contemporary appearance. 5336-3 Multi-Tilter Supra X is a new generation of affordable
More informationAGREEMENT. (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 102: Regulation No. 103
21 March 1997 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR
More informationAt market leading prices and with fast, hassle free installation
PRISM Stairlifts 2 COMFORT. SAF ETY. INDEPENDENCE. At market leading prices and with fast, hassle free installation Any Prism Stairlift is designed to make your life easier and ensure you continue to enjoy
More informationLabflex laboratory chairs. Sophisticated seating solutions for your laboratory
Labflex laboratory chairs Sophisticated seating solutions for your laboratory New generation of lab chairs Laboratory chair for all kinds of laboratories. The lab chair offers ergonomics with adaptability,
More informationCARES Technical Approval Report TA1C
CARES Technical Approval Report TA1C - 5057 Issue 1 LENTON Standard, Position, Parallel Bolt Couplers and Mechanical Anchor Assessment of the LENTON Standard, Standard Transition, Position, Parallel Bolt
More informationLarge &Tall. Concorde. Management. Concorde. Innovative push-button technology and comfort
Concorde Specifications DESCRIPTION SUGGESTED DIMENSIONS SEAT HEIGHT USER W D H IN IN IN IN mm mm mm mm Concorde Innovative push-button technology and comfort DEEP SEAT 2400-18 High Back Multi-Tilter wide
More informationNovember 2016 SOLIBRO GMBH COMPANY PRESENTATION RENEWABLE ENERGY DELEGATION FROM GERMANY. M.Sc.-Ing. Mostafa Kamal
November 2016 SOLIBRO GMBH COMPANY PRESENTATION RENEWABLE ENERGY DELEGATION FROM GERMANY M.Sc.-Ing. Mostafa Kamal CONTENT COMPANY FACTS PRODUCTS & QUALITY TECHNICAL FACTS APPLICATIONS REFERENCES SERVICE
More informationErgonomic Product Catalog - Chairs
Ergonomic Product Catalog - Chairs Chairs Note: (all chairs are configured in black fabric). Description Image Bodybilt J757 Model #: J757-SFS-N1 Fabric: COMFORTEK - CARBON (contact vendor for other fabrics)
More informationTHE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE APPROVAL GRANTED (1) TO A COMPONENT TYPE- APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE
More informationSIMPLE. AFFORDABLE. FAST. EASY. FURNITURE ESSENTIALS SEATING DESKS FILES
SIMPLE. AFFORDABLE. FAST. EASY. FURNITURE ESSENTIALS SEATING DESKS FILES THE FAST LANE TO A BETTER WORKSPACE The way you work is changing every day. At HON, we know that your workplace reflects your company
More informationCertificate: TNU112UML0348/ Test report: 112UML0348 / of 14 January 2013
Test report: 112UML0348 / 8000638271 of 14 January 2013 First certification: 29 July 2011 (first certification) Validity ends: 28 July 2016 Publication in the Federal Gazette: BAnz AT 05 March 2013 B10
More informationENERCON GmbH Dreekamp Aurich Germany ENERCON E-82 E4 2.35MW ENERCON E-82 E4 3.0MW. IIA, IEC : Amd1:2010
Certificate No. Wind Turbine This certificate is issued to for the wind turbines wind turbine class (class, standard, year) GmbH Dreekamp 5 26605 Aurich Germany E-82 E4 2.35MW E-82 E4 3.0MW IIA, IEC 61400-1:2005
More informationDESIGNED FOR INDIVIDUALISTS SKYE
DESIGNED FOR INDIVIDUALISTS SKYE For a first-class sitting and working experience The classic SKYE task chair by König + Neurath meets and exceeds all requirements in terms of contemporary design, aesthetics
More informationMoving and Handling Solutions
Ceiling Track Hoist Wispa Moving and Handling Solutions Made in the UK Wispa Hoist Range Moving and handling solutions for home, leisure and caring environments Healthcare providers have been working towards
More information