Gas turbines Procurement

Size: px

Start display at page:

Download "Gas turbines Procurement"

Hugh Floyd
5 years ago
Views:

1 BRITISH STANDARD Gas turbines Procurement BS EN ISO :2003 Incorporating Amendment No. 1 (renumbers BS ISO :2001 as BS EN ISO :2003) Part 5: Applications for petroleum and natural gas industries The European Standards EN ISO :2003 has the status of a British Standard ICS ; ; Confirmed October 2008

2 BS EN ISO :2003 National foreword This British Standard is the official English language version of EN ISO :2003. It is identical with ISO :2001. The UK participation in its preparation was entrusted to Technical Committee MCE/16, Gas turbines, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/european committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled International Standards Correspondence Index, or by using the Search facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisio ns of a contract. Users are responsible for its correct application. Compliance withabritish Standard does not ofitself confer immunity from legal obligations. This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee was published under the authority of the Standards Policy and Strategy Committee on 6 March 2002 Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iv, pages 1to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments BSI 24 March March 2003 Renumbers BS ISO :2001 as BS EN ISO :2003 ISBN X

3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO February 2003 ICS ; ; English version Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO :2001) Turbines à gaz - Spécifications pour l'acquisition - Partie 5: Applications pour les industries du pétrole et du gaz naturel (ISO :2001) Gasturbinen - Beschaffung - Teil 5: Anwendungen in der Erdöl- und Erdgasindustrie (ISO :2001) This European Standard was approved by CEN on 18 December CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO :2003 E

4 EN ISO :2003 Foreword The text of ISO :2001 has been prepared by Technical Committee ISO/TC 192, Gas turbines, of the International Organization for Standardization (ISO) a nd has been taken over as EN ISO :2003 by Technical Committee CEN/TC 12, Materials, equipment and offshore structures for petroleum and natural gas industries, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest byaugust 2003, and conflicting national standards shall be withdrawn at the latest by August According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO :2001 has been approved by CEN as EN ISO :2003 without any modifications.

INTERNATIONAL STANDARD EN ISO 3977 5:2003 ISO 3977-5 First edition 2001-12-15 Gas turbines Procurement Part 5: Applications for petroleum and natural gas

5 INTERNATIONAL STANDARD EN ISO :2003 ISO First edition Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries Turbines à gaz Spécifications pour l'acquisition Partie 5: Applications pour les industries du pétrole et du gaz naturel Reference number ISO :2001(E)

6 EN ISO :2003 ii

7 EN ISO :2003 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body intere sted in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 3977 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO was prepared by Technical Committee ISO/TC 192, Gas turbines, in collaboration with Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum and natural gas industries, Subcommittee SC 6, Processing equipment and systems. Documents taken into account in the development of ISO 3977 include API STD 616, API RP11PGT and the ASME B133 series of documents. ISO 3977 consists of the following parts, under the general title Gas turbines Procurement: Part 1: General introduction and definitions Part 2: Standard reference conditions and ratings Part 3: Design requirements Part 4: Fuels and environment Part 5: Applications for petroleum and natural gas industries Part 6: Combined cycles Part 7: Technical information Part 8: Inspection, testing, installation and commissioning Part 9: Reliability, availability, maintainability and safety iii

8 EN ISO :2003 Introduction Users of this part of ISO 3977 should be aware that further or differing requirements may be needed for individual applications. This part of ISO is not intended to inhibit a packager from offering, or the purchaser from accepting, alternative equipment or engineering solutions for the individual application. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the packager should identify any variations from this part of ISO 3977 and provide details. iv

9 ANRETNIITOTS LANDNADRA EN ISO :2003 OSI :5)E( Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries 1 Scope This part of ISO 3977 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged gas turbines for use in drilling, production, refining and the transport by pipelines of petroleum and natural gas. It is applicable to the procurement of gas turbines and gas turbine systems, including gas turbines for combined cycle systems, and their auxiliaries bya purchaser from a packager. This part of ISO 3977 is not intended to deal with local or national legislative requirements to which the installation may be required to conform. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 3977 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO , Gas turbines Procurement Part 1: General introduction and definitions ISO , Gas turbines Procurement Part 2: Standard reference conditions and ratings ISO , Gas turbines Procurement Part 3: Design requirements ISO , Gas turbines Procurement Part 4: Fuels and environment ISO , Gas turbines Procurement Part 7: Technical information ISO , Gas turbines Procurement Part 8: Inspection, testing, installation and commissioning ISO , Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety ISO 11086, Gas turbines Vocabulary 3 Terms and definitions For the purposes of this part of ISO 3977, the terms and definitions given in ISO 11086, ISO , ISO , ISO , ISO and ISO apply. 1

10 EN ISO : Requirements for gas turbines for the petroleum and natural gas industries 4.1 Reference conditions and ratings Standard reference conditions for gas turbines shall be as defined in ISO The packager shall declare standard ratings associated with the operational modes defined in ISO The packager shall also declare the site power rating as specified in ISO , for the specified site conditions of the installation and operating modes under which the plant is intended to run in service. 4.2 Design requirements Basic requirements The minimum basic requirements for the procurement of gas turbines and gas turbine systems are specified in ISO ISO also provides assistance and technical information to be used in the procurement. The purchaser shall provide site condition data and shall specify the package site specific operating point(s) on data sheets in accordance with ISO The packager shall review and comment the purchaser's piping, ducting and foundation drawings as specified in ISO Operational requirements shall be in accordance with ISO Service requirements shall be in accordance with ISO Rotating equipment requirements shall be in accordance with ISO Other equipment requirements shall be in accordance with ISO Vibrations and dynamics shall be in accordance with ISO Packaging and auxiliary equipment Packaging and auxiliary equipment shall be in accordance with ISO The packager shall provide, as a minimum, the equipment in ISO listed as the minimum to be provided as the package. Any other equipment required shall be as specified by the purchaser and shall be included in the packager's scope of supply. This equipment shall be assembled (packaged) to the maximum extent practical. Auxiliary equipment may include a) starting systems, b) mounting systems, c) enclosure and fire protection, d) air inlet systems, e) piping, f) oil systems, g) fuel system, h) electrical systems, i) exhaust system, 2

11 EN ISO :2003 j) driven equipment (compressor, pump, generator), and k) seal system for the above Control and instrumentation Control and protection systems, and associated instrumentation, shall be in accordance with ISO Consideration shall be given to starting, loading and shutdown. Provisions for ventilation and purging shall be in accordance with ISO Fuel control, governing and limiting, and emission control shall be in accordance with ISO Overspeed protection and protection systems shall be in accordance with ISO Compressor wash systems shall be in accordance with ISO Considerations for the control system shall be in accordance with ISO Control panel installation shall be in accordance with ISO Operability and diagnostics shall be in accordance with ISO Data communications shall be in accordance with ISO Fuels and environment The responsibilities of the purchaser and of the packager with respect to the fuels and the relationship to the procurement of a gas turbine system shall be in accordance with ISO Technical information The information to be submitted during the proposal and contract stages of a project covering the packager's scope of supply is defined in ISO The purchaser shall complete the data sheets and Packager Documentation Requirements from ISO The purchaser shall specify the performance data needed for the specific application in accordance with ISO The packager shall provide the Proposal and the Contract Documentation in accordance with ISO Inspection, testing, installation and commissioning Inspection, testing, installation and commissioning shall be in accordance with ISO ISO states the principles for systems and procedures to assure the integrity of the packager's products and services, and also outlines the responsibilities between the purchaser and the packager. Preparation for storage and shipment shall be in accordance with ISO Reliability, availability, maintainability and safety Exchange of information about reliability, availability, maintainability and safety between gas turbine manufacturers, packagers, purchasers, users, consultants, regulatory bodies and others shall be in accordance with ISO

12 EN ISO :2003 Bibliography [1] API STD 616, Gas Turbines for the Petroleum, Chemical and Gas Industry Services [2] API RP 11PGT, Packaged Combustion Gas Turbines [3] ASME B133, Series on gas turbines 4

14 BS EN ISO :2003 BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BS I to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0) Fax: +44 (0) BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0) Fax: +44 (0) orders@bsi-global.com. Standards are also available from the BSI website at In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Ce ntre. Tel: +44 (0) Fax: +44 (0) info@bsi-global.com. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0) Fax: +44 (0) membership@bsi-global.com. Information regarding online access to British Standards via British Standards Online can be found at Further information about BSI is available on the BSI website at BSI 389 Chiswick High Road London W4 4AL Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and PatentsAct 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission ofbsi must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0) Fax: +44 (0) copyright@bsi-global.com.

Waste fittings for sanitary appliances

BRITISH STANDARD BS EN 274-2:2002 Incorporating Corrigendum No. 1 Waste fittings for sanitary appliances Part 2: Test methods The European Standard EN 274-2:2002 has the status of a British Standard ICS