2017 Police Interceptor Utility. New Product Features

Transcription

1 2017 Police Interceptor Utility New Product Features

2 Police Engine Idle This feature allows you to leave the engine running and prevents your vehicle from unauthorized use when outside of your vehicle. Allows the key to be removed from ignition while vehicle remains idling. Switching the System On: With your vehicle running and the transmission in park (P), press the button on the instrument panel. A warning lamp illuminates to confirm the system is on Switch the ignition off and remove the key. When the system is on: The power windows are disabled and the windows remain in their current state. The power door locks are disabled and all doors remain in their current locking state. Note: The doors can be unlocked with the key blade The liftgate or luggage compartment does not open but can be opened with the key. To Switch the System Off: The system can be switched off by doing any of the following: Inserting the key and switching the ignition to the run position. Pressing the button on the instrument panel. Note: If you switch the system off before switching the ignition to the run position, your vehicle shuts down Option Code: (47A)

3 Front Interior Visor Light Bar Take on a stealth appearance with this low profile Front Interior Windshield Warning Lights The interior visor light is a super low-profile warning LED light bar fully integrated into the top of the windshield New interior visor light to provide a covert feature for agency patrol vehicles Dark shade band at the top of the windshield is replaced by clear glass when the visor light is ordered, providing superior color visibility and brightness. The interior visor light comes with a limited warranty and maintains the spacious interior feel that many agencies love about the latest generation of Ford Police Interceptors When activated, the interior visor light flashes bright, alternating red and blue bars on the top of the windshield and can be programmed for red/red or blue/blue operation The visor light also features bright white take down and scene capabilities, which give excellent forward visibility, and can be set up to meet California Title 13 regulations flash patterns. The visor light can also be programmed from full intensity down to 20% as needs dictate. NOTE: Police Interceptor Utility Only Option Code: (96W)

4 Front Interior Windshield Warning Lights Option Code: (96W)

5 Ballistic Panels Level 4 Tested and meets the requirements of NIJ Standard Level IV: M2 AP 166gr (7.62 x 63 APM2 10.8g) Designed to withstand special threat rounds: 7.62 x 54R LPS 9.65g 7.62 x 51 mm M g (.308 Winchester 150.5gr) In addition, Level IV includes all of the NIJ Level III and LAPD rounds listed below: Per LAPD requirements, they re also designed to withstand special threat rounds: x 39 mm MSC 7.9g (Type 56) x 45 mm M g x 45mm M855 4g Note: This action was made available for production on 2016MY Police Interceptors beginning March 15, 2016 Level IV : Driver Side 90F Level IV : Driver/Passenger Side 90G

6 2017MY DARK CAR FEATURE/SILENT MODE 2016MY Base Police Functionality (configured 100% std.) No Locking Horn Feedback No Locking Light Feedback No Un-Locking Light Feedback Dark Car Feature (when ordered) Courtesy Lights OFF Welcome/Farewell OFF Ability To Turn OFF Cluster/Center Stack Lighting Via Dimmer Switch Daytime Running Lights Always On (if equipped) 2017MY Base Police Functionality (configured 100% std.) No Locking Horn Feedback No Locking Light Feedback No Un-Locking Light Feedback If DRLs not ordered: No change vs. 2016MY If DRLs ordered: May order Silent Mode only Silent Mode (when enabled) Courtesy Lights OFF Welcome/Farewell OFF Ability To Turn OFF Cluster/Center Stack Lighting Via Dimmer Switch DRLs = OFF, Except Canada (Canada = ON) Silent Mode (when disabled) Courtesy Lights ON Welcome/Farewell ON Ability To Turn OFF Cluster/Center Stack Lighting Via Dimmer Switch DRLs = ON

7 2017MY DARK CAR FEATURE/SILENT MODE Silent Mode Select In Cluster Setting Silent Mode Option Code (43L)

8 Power Distribution Lug The Power Distribution Lug has been repositioned to allow easier access for upfitting. Previous location was on passenger side, rear cargo area, behind fender wall New location is now behind 2nd row passenger side floorboard Floor panel access Standard Police feature Power Lug set into position (red box), behind 2nd row passenger side floorboard Police Interceptor Utility Only Note: This action was implemented on 2016 Police Interceptor Utility models in late Nov/Dec 2015 To front passenger side of vehicle To rear passenger side of vehicle 2rd row passenger seatback Standard Equipment

9 Power Distribution Lug Back side of 2nd row seat (driver side ) Back side of 2nd row seat (pass. side ) PDL located under floor panel access Cargo area flooring Standard Equipment

10 Dome Lamp / Overhead Red/White Red/White Dome Lamp is now LED Note: This action was implemented on 2016 Police Interceptors models in late Nov/Dec 2015 Front Row Standard Cargo Area Option 17T