Assembly kit. Minifox. Firefox minimale
|
|
|
- Amberlynn Carr
- 5 years ago
- Views:
Transcription
1 Assembly kit Minifox Firefox minimale
2 INTRODUCTION The new assembly kit is an incredible opportunity for anyone to create himself an innovative and original aeroplane. Sure enough, the Minifox offers the chance to fly freely limiting costs of buying and maintenance costs of the aeroplane. Thank to the 30-year Eurofly s experience in the aviation sector, we can guarantee you very high levels of safety of our products. This document is an itemized list in which you can find a lot of pictures who help you to prepare for the assembly. ASSEMBLY KIT The assembly kit is a package of components who are needed to build all parts of the airplane. In the following documents each set has own code, own illustration, a detailed components list and some pictures. In the underlying picture you can observe the fuselage s framework and the spar of the back of the plane. They represent the two main elements of the airplane and the starting point for mounting of the Minifox. Freedom to fly 1
3 SET001 Set Screw to fix spar of the back of the plane Screw M8 x 40 2 Screw M8 x 20 2 Nut self-locking M8 4 Washer M8 x 18 2 Washer M8 x 32 4 Freedom to fly 2
4 SET002 Set strain relief control tail fin-vertical stabilizer Steel inox rivet avdel 4 x 9 8 Nylon strain relief 4 Inox strain refief supports 4 Tube Rislan 6 x 4, 50 cm 1 Freedom to fly 3
5 SET003 Set Rudder pedals Rudder pedals 2 Nylon bush 4 Screw M6 x Nut self-locking M6 2 Screw M5 x 20 2 Washer M5 Grover 2 Uniball M5 complete with fork and braking system 2 Inox bioler-plate screw M5 x 16 2 Nut self-locking M5 2 Freedom to fly 4
6 SET004 Set direction variator Aluminium control set square 1 Aluminium bearing support 1 Bearing 6 x 19 2 Screw inox M5 x 16 3 Screw M6 x 30 1 Washer 6 x 14 2 Nut self-locking M6 1 Uniball M5 complete with aluminium spacer 4 Uniball M6 complete with spacer 2 Connection support between caster and 1 direction variator Screw M6 x 20 2 Nut self-locking M6 2 Screw M5 x 20 4 Washer M5 Grover 2 Nut self-locking M5 3 Screw M5 x 50 1 Washer M5 x 10 2 Freedom to fly 5
7 SET005 Set Front Landing gear Fork 1 Nylon bush 2 Nut self-locking M6 1 Washer M6 x 24 1 Freedom to fly 6
8 SET006 Set control between tail fin-vertical stabilizer and ailerons Inox cable 15 metre x 2,5 1 Nicopress 2,5 8 Redance 4 Screw M5 x 35 2 Nut self-locking M5 2 Shackles M5 2 Freedom to fly 7
9 SET007 Set main Landing gear Planks ergal 2 Pivot (wheel) 2 Screw M12 x 60 2 Screw M6 x 40 6 Nut self-locking M6 4 Washer M6 x 14 4 Freedom to fly 8
10 SET008 Set Wheels Wheel with brake 2 Wheel without brake 1 Freedom to fly 9
11 SET009 Set control back elevator Steel zinc-coated cross 1 Spar diameter 6mm x 155 inox 1 Nylon bush 2 Nylon washer 2 Nut self-locking M6 2 Washer 6 x 14 2 Screw M8 x 25 1 Nut self-locking M8 1 Uniball male M8 1 Nut (normal) M8 1 Aluminium insert M8 1 Screw M5 x 35 1 Washer m5x10 2 Nut self-locking M5 1 Aluminium spar x1,5 x Freedom to fly 10
12 SET010 Set rompitratta elevator control Aluminium-teflon bush complete wih screw M6 x 60 1 Aluminium spacer 45 x 15 1 Nut self-locking M6 1 Washer M6 x 4 1 Freedom to fly 11
13 SET011 Set front side elevator control Support connection assembled control stick 1 Screw m6x25 1 Nut self-locking M6 1 Washer M6 x 14 3 Screw M5 x 35 1 Washer M5 x 10 2 Nut self-locking M5 1 Freedom to fly 12
14 SET012 Set control trim Plastic lever 1 Flat-head screw M6 x 16 2 Washer 6 x 14 2 Nut self-locking M6 2 Inox cable metre 6, diameter 2mm 1 Nicopress diameter 2mm 1 Redance 1 Inox screw M5 x 16 1 Nut self-locking M5 1 Terminal 1 Freedom to fly 13
15 SET013 Set control ailerons and fuselage Aluminium set square 1 Bearing support 1 Bearing 6 x 19 2 Inox screw M5 x 16 3 Screw M6 x 80 1 WasherM6 x 14 5 Nut self-locking M6 3 Washer M6 Grover 2 Screw M6 x 25 2 Nut (normal) M6 4 Uniball male M6 4 Spars diameter 13 x Freedom to fly 14
16 SET014 Set upper spar 50x50 Spar 50 x 50 x C steel Inox join wings 4 Screw M8 x 70 5 Nut self-locking M8 5 Nylon pulley 2 Steel Inox spacer diameter 8x15 2 Aluminium cable 2 Screw M6 x Nut self-locking M6 1 Freedom to fly 15
17 SET015 Set airplane seat Sealt belt 4 point 1 Aluminium buckles 2 Anatomical seat 1 Freedom to fly 16
18 SET016 Set gas control Aluminium lever 1 Nylon washer (red) 2 Screw M4 x 16 1 Nut self-locking M4 1 Teflon washer 6 x 24 2 Washer with welded nut 6 x 24 1 Screw with welded washer M6 x 30 1 Freedom to fly 17
19 SET017 Set tank Tank 1 Belt 1 Freedom to fly 18
20 SET018 Set heap of control stick Aluminium tube diameter 25x1,25 mm 1 Section join cables 1 Section join control stick 1 Bearing 6 x 19 2 Bearing 25 x 37 2 Screw M5 x 40 2 Nut self-locking M6 1 Vertical lever 1 Lever control brake 1 Control knob 1 Steel cables 3,10 m 2 Cladding metres 4,5 1 Nicopress diameter 2,5 8 Redance diameter 2,5 4 Uniball male M5 complete with fork and 2 braking system Steel inox screw M5 x 16 2 Screw m5 x 20 2 Washer M5 Grower 2 Nut self-locking M5 6 Washer m5 x 10 4 Screw M6x50 1 Shackles M5 2 Screw M5 x 35 2 Nut self-locking M5 2 Freedom to fly 19
21 SET019 Set join strut and fuselage C steel inox 4 Screw M10 x 80 4 Nut self-locking M10 4 Freedom to fly 1
22 SET020 Set vertical fixed flat surface Screw M6 x 35 3 Washer 6 x 14 3 Tapping crew 2 Inox rivet 4 x13 22 Inox joints 6 C steel inox to join with horizontal flat 4 surface Screw M6 x 40 2 Nut self-locking M6 2 Screw M5 x 30 3 Nut self-locking M5 6 Washer M5 x 10 6 Plates to fix flat surface on spar 2 Aluminium thread insert M6 1 Screw M5 x 40 2 Screw M5 x 35 1 Screw M6 x 20 1 Washer M6 x 25 1 Leading edge 1 Radice 1 Trailing edge 1 Rompitratta 1 Freedom to fly 2
23 SET021 Set vertical moving flat surface Trailing edge 1 Rompitratta 1 Leading edge 1 Tapping screw 2 Inox rivet 4 x Inox joint 6 Set square control to join 2 cables Screw M5 x 40 2 Nut self-locking M5 2 Washer 5 x 10 4 Washer 6 x 14 2 Screw M6 x 30 2 Freedom to fly 3
24 SET022 Set horizontal fixed left flat surface Contenuto Leading edge 1 Trailing edge 1 Radice 1 Rompitratta 1 Screw M6 x 35 3 Washer 6 x 14 5 Inox rivet 4 x Inox joint 6 Tapping screw 2 Screw M6 x 40 4 Nut self-locking M6 4 Screw M5 x 30 3 Nut self-locking M5 3 Joint aluminium strut 2 Freedom to fly 4
25 SET023 Set horizontal moving left flat surface Leading edge 1 Trailing edge 1 Rompitratta 1 Tapping screw 2 Inox joint 6 Inox rivet 4 x Screw M5 x 35 2 Nut self-locking M5 2 Washer M5 x 10 4 Plate to attach spar with elevator 1 control Screw M6 x 30 2 Washer 6 x 14 2 Freedom to fly 5
26 SET024 Set horizontal fixed right flat surface Leading edge 1 Trailing edge 1 Radice 1 Rompitratta 1 Screw M6 x 35 3 Washer 6 x 14 5 Inox rivet 4 x Inox joint 6 Tapping screw 2 Screw M6 x 40 4 Nut self-locking M6 4 Screw M5 x 30 3 Nut self-locking M5 3 Joint aluminium strut 2 Freedom to fly 6
27 SET025 Set horizontal moving right flat surface Leading edge 1 Trailing edge 1 Rompitratta 1 Tapping screw 2 Inox joint 6 6 Inox rivet 4 x Screw M5 x 35 2 Nut self-locking M5 2 2 Washer M5 x 10 4 Plate to attach spar with elevator control 1 Screw M6 x 30 2 Washer 6 x 14 2 Freedom to fly 7
28 SET026 set trim control Aluminium plate 1 Set square to attach plate control 1 Joint 2 Inox rivet 4 x 13 5 Steel inox spar diameter 6 1 Coil 1 Flexible head M5 1 Regulator M5 1 Fork M6 1 Nut (normal) M6 2 Nut self-locking M5 3 Nut self-locking M4 2 Screw M5 x 16 1 Inox screw M4 x 10 2 Aluminium thermo-sheath 1 Sheath 1,5 m 1 Freedom to fly 8
29 SET027 Set strut for flat surface of the back of the plane Aluminium spar 13 x Aluminium spar 13 x Piece of crescent-shaped plastic 16 Screw M5 x 30 8 Nut self-locking M5 8 Washer 5 x 10 8 Washer M5 x 15 8 Freedom to fly 9
30 SET028 Set spars for elevator control Aluminium spar 13 x Uniball M6 4 Nut (normale) M6 4 Screw M6 x 25 2 Nut self-locking M6 3 Washer Grover M6 4 Screw M6 x 60 1 Freedom to fly 10
31 SET029 Set veiling of flat surface of the back of the plane Sail of vertical fixed flat surface 1 Sail of vertical moving flat surface 1 Sail of horizontal fixed right flat surface 1 Sail of horizontal fixed left flat surface 1 Sail of horizontal moving right flat surface 1 Sail of horizontal moving left flat surface 1 Freedom to fly 11
32 SET030 Set right half-wing Assembled structure half- wing (framework) 1 Nylon stopper 2 Screw M8 x 70 2 Nut self-locking M8 2 Inox rivet 4 x Washer M4 x 15 1 Aluminium plate to attach strut 4 Screw M6 x 80 2 Screw M6 x 70 2 Washer 6 x 14 8 Nut self-locking M6 4 Aluminium rivet diameter 3 mm 18 Upper curved stick 11 Lower straight stick 7 Inox joint 6 Freedom to fly 12
33 SET031 Set left half-wing Contenuts Assembled structure half-wing (framework) 1 Nylon stopper 2 Screw M8 x 70 2 Nut self-locking M8 2 Inox rivet 4 x Washer M4 x 15 1 Aluminium plate to attach strut 4 Screw M6 x 80 2 Screw M6 x 70 2 Washer 6 x 14 8 Nut self-locking M6 4 Aluminium rivet diameter 3 mm 18 Upper curved stick 11 Lower straight stick 7 Inox joint 6 Freedom to fly 13
34 SET032 Set veiling of right half-wing Complete veiling of half-wing 1 Leading edge made of expanded polystyrene 1 Freedom to fly 14
35 SET033 Set veiling of left half-wing Contenuto Complete veiling of half-wing 1 Leading edge made of expanded polystyrene 1 Freedom to fly 15
36 SET034 Set connection veiling leading edge Connection between leading edge with velcro edge 1 Freedom to fly 16
37 SET035 Set structure assembled right aileron Structure assembled aileron 1 Aluminium bush for attach set square 1 Aluminium set square for aleiron control 1 Inox screw M6 x 16 1 Inox screw M4 x 10 3 Nut self-locking M6 1 Inox rivet 9 x Inox joint 6 Aluminium rivet diameter 3 mm 3 Freedom to fly 17
38 SET036 Set veiling right aleiron Veiling right aleiron 1 Freedom to fly 18
39 SET037 Set structure assembled left aleiron Structure assembled aileron 1 Aluminium bush for attach set square 1 Aluminium set square for aleiron control 1 Inox screw M6 x 16 1 Inox screw M4 x 10 3 Nut self-locking M6 1 Inox rivet 9 x Inox joint 6 Aluminium rivet diameter 3 mm 3 Freedom to fly 19
40 SET038 Set veiling left aleiron Veiling aleiron 1 Freedom to fly 20
41 SET039 Set struts Aluminium front extrusion 2090 mm 2 Aluminium rear extrusion 2180 mm 1 Heads to attach strut 8 Screw M5 x Nut self-locking M5 16 Washer 5 x Screw M8 x 40 8 Washer M8 x Nut self-locking M8 8 Freedom to fly 21
42 SET040 Set wheel of the back of the plane Inox rivet 9 x 13 8 Set square to shore up wheel 2 Wheel with bearing 1 Aluminium spacer 12 x 32 1 Screw M6 x 50 1 Nut self-locking M6 1 Washer 6 x 14 2 Freedom to fly 22
43 SET041 Panel on all-composite Panel on all- composite 3 Freedom to fly 23
44 NOTE: Freedom to fly 24
X-Air F - Parts Price List
Warning: These prices are outdated and will soon be replaced with current price lists. Please get a currently valid quote before ordering. X-Air F - Parts Price List Part Number 101058 101070 101074 101088
X-Air S - Parts Price List
X-Air S - Parts Price List Part Number Part Name Price AX06070 Trailing edge pin M6 Bolt (but and drill) $1.14 101058 Plate, Exhaust $6.44 101070 Bush, exhaust support $4.59 101074 Exhaust pipe support
Instruction Manual. We wish you many enjoyable flights with your plane and once again thank you for your choosing a Phoenix Model product
Instruction Manual Wing span: 1590mm (626 in) Length: 1100mm (433 in) Weight: 1500gr - 1700gr Motor: AXI 2814/10 or Motor: 500-600 w/ gear box Radio: 4 Channel / 4 servos standar Propeller: 12 x 47 We
Lower Fuselage Assembly. Controls
Lower Fuselage Assembly Jabiru Aircraft Controls Lower Fuselage Assembly 10.11 3 051000 1 Assemble & Fit Control References: Drawings 3000092-7 and 93000K4/1 see (10.12) Photo 10.11(a) to 10.11(i) Parts
Instruction Manual BULLDOG. Wingspan : 1410 mm (55.5in) : 1450 mm (57.1in) : 4900gr gr. Weight. : 6-9 Channel/ 7 servo high torque, 1standard
Wingspan : 1410 mm (55.5in) Length Weight Radio Engine : 1450 mm (57.1in) : 4900gr - 5600gr : 6-9 Channel/ 7 servo high torque, 1standard : 1.20/ 2 stroke 1.80/ 4 stroke KIT CONTENTS: We have organized
AEROPRAKT SERVICE BULLETIN. No. SB A22LS-17 REPLACEMENT OF RUDDER CONTROL SYSTEM CABLES AND FAIRLEADS OF A-22, A-22L, A-22L2 AND A-22LS AIRCRAFT
Aeroprakt Ltd AEROPRAKT SERVICE BULLETIN No. SB A22LS-17 REPLACEMENT OF RUDDER CONTROL SYSTEM CABLES AND FAIRLEADS OF A-22, A-22L, A-22L2 AND A-22LS AIRCRAFT Repeating symbols: Please, pay attention to
XP 12 PLANS AND NOMENCLATURE
XP 12 PLANS AND NOMENCLATURE EDITION JANUARY 2002 Plans and Nomenclature XP 12 EDITION : JANUARY 2002 PAGE : 1 XP 12 - Nomenclature REP DESIGNATION QTY REF 1 SCREW CHC 6-30-10 4 B063210 2 SCREW CHC 6-35
Wilga 20cc. Assembly Manual
Wilga 20cc Assembly Manual Caution! You should not regard this plane as a toy! To ensure safety, please read this instruction manual thoroughly before assembly. Building and operating a model plane requires
Instruction Manual MUSTANG P51 - EP. Wingspan : 1377mm (54.21in) : 1180mm (46.46 in) : 2200gr gr. : AXI motor 2826 or 4120
Instruction Manual MUSTANG P51 - EP Wingspan : 1377mm (54.21in) g Length : 1180mm (46.46 in) Weight : 2200gr - 2600gr Engine : AXI motor 2826 or 4120 Radio : 4 channel / 4 servos standard KIT CONTENTS:
OCT/NOV Texas Flying Legends P-47D-23RA
OCT/NOV Texas Flying Legends P-47D-23RA by Chuck Cravens The first joined large assemblies on the bench. Update In October and November, for the first time we began some assembly of the major components
MONOCULP/SR 9 MANUAL BR COLOR BY COLOR BW COLOR RW COLOR
MONOCULP/SR 9 MANUAL BR COLOR BY COLOR BW COLOR RW COLOR Caution! You should not regard this plane as a toy! To ensure safety, please read this instruction manual thoroughly before assembly. Building
XP 17 PLANS AND NOMENCLATURE
XP 17 PLANS AND NOMENCLATURE SEPTEMBER 2000 EDITION Plans and Nomenclature XP 17 EDITION : SEPTEMBER 2000 PAGE : 1 XP 17 - NOMENCLATURE REP DESIGNATION QTY REF 1 SCREW CHC 6-30-10 4 B063210 2 SCREW CHC
1 All our plane have the matching carbon fiber servo arms, carbon fiber main and tail landing gear, carbon fiber spinner and wood propeller available.
Our airplane model: 1 All our plane have the matching carbon fiber servo arms, carbon fiber main and tail landing gear, carbon fiber spinner and wood propeller available. 2 Pre-glued cowling ring with
Seabee Annual Inspection Procedures
Procedures Due to the wide variety of Seabee s flying out there, these procedures should be modified to fit YOUR Seabee. Make sure that all AD s are complied with as well as any required Service Bulletins
Aeroprakt Ltd. AEROPRAKT-22LS Illustrated Parts Catalog A32-IPC-01
Aeroprakt Ltd. 24, Polevaya str., Kiev, Ukraine Tel: 038 044 496-77-21 Fax: 038 044 496-77-31 e-mail: air@prakt.kiev.ua www.aeroprakt.kiev.ua AEROPRAKT-22LS Illustrated Parts Catalog Contents 1. INTRODUCTION...
ASK 21 - Flight Manual. Check List / 1
Check List / 1 Pre Flight Check 1. Main pins secured? 2. Rear wing attachment pins: is the safety lock visible above the pin? 3. Horizontal tail unit pins secured. Is the spring retainer engaged? 4. Elevator
Mooney Mite M-18X Plans and Drawings Index Arranged by Group Miscellaneous Group
Miscellaneous Group 110470 Bushings - Special 314410 Airspeed & Altimeter Installation 110190 Arm - Landing Warning 110070 Button - Static Airspeed 213260 Cone - Wing Fillet 110120 Control - Placard 616100
KISS 450 PLANS AND NOMENCLATURE
KISS 450 PLANS AND NOMENCLATURE AUGUST 2000 EDITION Plans and Nomenclature KISS 450 EDITION : AUGUST 2000 PAGE : 1 KISS 450 - NOMENCLATURE REP DESIGNATION QTY REF 1 SCREW CHC 6-30-10 4 B063210 2 SCREW
Seabee Annual/100-Hour Inspection
Date Completed Seabee Annual/100-Hour Inspection ENGINE Mechanic s Initials 1 Drain engine oil and check for foreign material 2 Check oil screen for proper rotation or looseness 3 Safety Oil Plug 4 Refill
Instruction Manual. Specifications are subjected to change without notice due to product continuous improvements.
Instruction Manual Specifications are subjected to change without notice due to product continuous improvements. 1 The Wargo Signature Yak 55 is the realization of my goal to have the perfect 3D and aerobatic
Chapter 27. Flight Controls
Chapter 27 Flight Controls PAGE 1 Chapter 27 Table of Contents Chapter Title 27-00-00 GENERAL.................................. 3 27-00-01 Control Rods................................. 6 27-00-02 Bellcranks...................................
Instruction Manual EXTRA 260-EP. 1075mm (42.32 in) 1000mm (39.37 in) 1100gr gr. 4 channel - 4 mini servo. Axi motor 2820
1075mm (42.32 in) 1000mm (39.37 in) 1100gr - 1400gr 4 channel - 4 mini servo Axi motor 2820 KIT CONTENTS: We have organized the parts as they come out of the box for better identification during assembly.
12/03 EXPLODED VIEW 1) L angles on first rear rib: moved from inboard to outboard side of rib (12/03)
ZODIAC CH 601 XL Drawing list December 04, 2003 3 rd revision of 2 nd edition 12/03 Summary of revisions from 07/03 to 11/03 AIRFRAME 6-X-0 DRAWING LIST Dec 4, 2003 6-X-1 6-T-0 6-T-1 6-T-2 6-T-3 6-T-4
Schleicher (Germany) Wooden / Metal Structure Aircraft
Contact: UK Agent: - Zulu Glasstek, Peter Wells Tel 01844 201028 or 208157 http://www.zulu-glasstek.co.uk/ A lot of spares like oversize pins and GL1 wood available at http://www.ltb-krane.de/ Current
Schempp-Hirth (Germany)
Contact: UK agents Southern Sailplanes: 01488 71774 http://www.southernsailplanes.com/southern_sailplanes/southern_sailplanes_-_home/southern_sailplanes_- _Home.html LBA https://www.lba.de/en/divisiont/airworthiness/ads/ads.html
Assembly Manual. Version 01/01/2006
Assembly Manual ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr www.adjets.com Version 01/01/2006 INTRODUCTION is our new jet
Aero-East-Europe d.o.o. SILA 450C SPARE PARTS CATALOG
Aero-East-Europe d.o.o. SILA 450C SPARE PARTS CATALOG ADRESS: Aerodromska BB 36000 Kraljevo Serbia PHONE: 063/318-660 FAX: 036/318-660 MAIL: aeroeasteurope@gmail.com INTRODUCTION In front of you is the
Table of Contents. Tail Wheel Assembly Installation.. page 01. Stabilizer Installation.. page 02. Fin Installation.. page 03
Table of Contents Tail Wheel Assembly Installation.. page 01 Stabilizer Installation.. page 02 Fin Installation.. page 03 Elevator and Rudder Hinge Installation.. page 04 Rudder Controls.. page 05 Elevator
Fuselage tunel SD Washer pos. 8, set 22,78 27, Bush pos. 9, pair 12,06 14, Bush pos. 10, pair 12,06 14,35
PRICE LIST OF SD-1 Minisport Parts Valid from 1.1.-31.12.2018 P/N Composite parts VK netto inkl. MWSt 101001 Wing tip, pair 314,90 374,73 101002 Elevator tip, pair 54,94 65,38 101003 Fuel tank complete
The tie to tube front windshield was rounded to avoid a distorted by this point.
CHANGES IN AIRFRAME IBIS MAGIC GS-700 (2.008) Drilling of plastic polycarbonate drill with 9/64 so that it is an amplitude when riveting. The tie to tube front windshield was rounded to avoid a distorted
EXTRA 330LX. Specifications: Code: SEA274. Graphics and specifications may change without notice. ASSEMBLY MANUAL
ASSEMBLY MANUAL EXTRA 330LX Code: SEA274 Graphics and specifications may change without notice. Specifications: Wingspan---------------82.0 in (208.2 cm). Wing area---------------1349.4 sq.in ( 87.1 sq.dm).
RADIO CONTROL MODEL HURRICANE
RADIO CONTROL MODEL VQAA040G VQAA040B HURRINE Almost ready to fly SPECIFITIONS Wingspan...63 in. / 161cm Length...50 in. / 129cm Engine...50~60 2T / 70~90 4T Or Electric equivalent. RC Functions: Motor
N398CM. RC-3 Serial Number 387 Zero Timed Restoration Details
RC-3 Serial Number 387 Zero Timed Restoration Details WING GROUP: Complete disassembly of wings, flaps, ailerons, lift struts, floats, and float struts. removal, alodine dip, and epoxy prime, w/bms 10-11.
MS:159 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
ASSEMBLY MANUAL MS:159 Graphics and specifications may change without notice. Specifications: Wing span ----------------------------61.8in (157cm). Wing area -----------------1100.5sq.in (71.0sq dm). Weight
ALMOST READY TO FLY. Wing Span in cm. 2
ASSEMBLY MANUAL ALMOST READY TO FLY MS:X9 Specifications Wing Span --------------------------61.4 in ---------------------------156cm. 2 Wing Area --------------------------606.1 sq.in ------------------
Introduction. Fuselage/Cockpit
Introduction The Moravan Zlin 242L is a fully aerobatic 2 seat aircraft designed to perform all advanced flight maneuvers within an envelope of -3.5 to +6 Gs. Many military and civilian flight-training
Zero Fighter 52# SAFETY PRECAUTIONS
Zero Fighter # Specification: Wing Span: mm/9in Length: 9mm/.in Flying Weight:.kg Wing area: 9.dm Engine: 0-0cc R/C System: + channel radio system Servo: 0 C.G: mm back from the leading edge at wing root
Monocoupe 90 AF BY LESLIE M. ADAMS
Monocoupe 90 AF BY LESLIE M. ADAMS Tired of contest models? Get away from it all with this swell flying scale version of the latest Monocoupe. Its appearance will satisfy even most exacting scale fiend.
ASSEMBLY MANUAL. Kit features. MS:88
MS:88 ASSEMBLY MANUAL Graphics and specfications may change without notice. Specifications: Wingspan-------------------------------------------------- 70.9 in--------------------------------------- 180cm.
ASSEMBLY MANUAL. Kit features. MS:76
ASSEMBLY MANUAL MS:76 Graphics and specfications may change without notice. Specifications: Wingspan---------------------------------------------------- 82.8 in------------------------------------- 210.3cm.
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist. Engine Compartment
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist Registration No: Aircraft Checklist Pre Ground Test Model: Serial No: Engine Compartment Propeller: Prop Size: 60 x 53 Other:.. Propeller Serial No:
PITTS 12 R/C SPORT-SCALE AIRCRAFT ASSEMBLY AND INSTRUCTION MANUAL. Copyright Century UK Limited 2012
PITTS 12 R/C SPORT-SCALE AIRCRAFT ASSEMBLY AND INSTRUCTION MANUAL 1 Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for use by beginners. It should not
ASSEMBLY MANUAL. Graphics and specifications may change without notice.
NEMESISMS: SEA 111 ASSEMBLY MANUAL Graphics and specifications may change without notice. Specifications Wing span------------------------------------- 55.9in ------------------------------- 142cm. Wing
Full Lotus Installation
Full Lotus Installation Full Lotus floats are sold without struts, spreaders, and other installation hardware. This document contains construction drawings and photos of an installation for the Avid Flyer
ASSEMBLY MANUAL. Graphics a nd s pecifications m ay c hange w ithout n otice.
MS: 86 ASSEMBLY MANUAL Graphics a nd s pecifications m ay c hange w ithout n otice. Specifications Wing span-------------------------------------- 70.9 in------------------------------ 180cm. Wing area--------------------------------------
MAXI LIFT. 33cc ASSEMBLY MANUAL. ALMOST READY TO FLY. Specifications: MS: 209
WWWSEAGULLMODELSCOM ASSEMBLY MANUAL MAXI LIFT 33cc Graphics and specifications may change without notice MS: 209 ALMOST READY TO FLY Specifications: Wingspan---------------876 in (2222 cm) Wing area----------------10726sqin
Instruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,800mm. 70.87 in. Length : 1,350 mm. 53.15in. Weight : 3.6kg. 7.92lbs. Parts Listing required (not included). Glow Engine : 55-61 2 stroke. 91 4 stroke.
MS:176 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
ASSEMBLY MANUAL MS:176 Graphics and specifications may change without notice. Specifications: Wing span ------------------------------98.4in (250cm). Wing area ----------------1576.4sq.in (101.7sq dm).
KITPLANES FOR AFRICA AIRCRAFT FUSELAGE CONSTRUCTION MANUAL
APPENDIX AH KITPLANES FOR AFRICA AIRCRAFT FUSELAGE CONSTRUCTION MANUAL Revision: C September 2008 Page F1 of 29 FUSELAGE CONSTRUCTION MANUAL NOTE: Please read the General Manual before proceeding. Please
CAP 232 ASSEMBLY MANUAL
CAP 232 MS: ASSEMBLY MANUAL SEA 91 Graphics and specfications may change without notice. Specifications Wingspan------------------------------------ 65 in --------------------------------- 165cm. Wing
Check List for Maintenance Valid for SF 25 C Falke. Registration: Engine Type: ROTAX 912 A (1), (2), (3), (4) ROTAX 912 S (2) (3) (4) Owner:
Check List for Maintenance Valid for SF 25 C Falke Motor Glider Type: SF 25 C Serial No.: Engine Type: ROTAX 912 A (1), (2), (3), (4) ROTAX 912 S (2) (3) (4) Propeller Type: Registration: Year of Production:
第 4 页. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. Accessory list for the installation of aileron.
TopRCModel-USA.com TopRCModel-USA.com 第 3 页 Accessory list for the installation of aileron. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. 1. Sanding the fiber horns. 4. Fix the fiber
A Simplified Index of Mooney M-18 Drawings at the NASM
A Simplified Index of Mooney M-18 Drawings at the NASM Dwg. No. Dwg. date Title Models Remarks IDnum Price 0000 23-Aug-54 M-18 Aileron Crank Mooney M-18 17 x 22 DD-0029487 $2.10 0000 [Lower Pick-Up Strap
GlaStar / Sportsman Service Bulletin 64- MANDATORY
GlaStar / MANDATORY Note: Subject: Applicability: This service bulletin supersedes 49. The service bulletin applicability was updated to include kits. No other changes were made Inspection of welded cage
Instruction Manual book
book SPECIFICATION Wingspan : 1,450 mm 57.09 in. Length : 1,200mm 47.24in. Weight : 3.1 kg 6.82 Lbs. Radio : 05 channels. Servo : 07 servos. Engine : 61-75 2 stroke. 91 4 stroke. Made in Vietnam. This
SAFETY INSTRUCTIONS. 1. Please read this manual carefully and follow the instructions of the manual before you use this products.
INSTRUCTION MANUAL 1. Please read this manual carefully and follow the instructions of the manual before you use this products. SAFETY INSTRUCTIONS 2. Our airplane is not a toy, which is only suitable
Instruction Manual book
book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. This instruction manual
12.0 CONTROLS 3/3/2006. Page 1
Page 1 Page 2 SR3500 Rudder Pedal Parts List ITEM DESCRIPTION PART NUMBER QTY 1 MASTER BRAKE PEDAL RP0015 2 2 SLAVE BRAKE PEDAL RP0016 2 3 PUSH ROD RP0017 4 4 SLAVE BRAKE TORQUE TUBE RP0018 2 5 MASTER
Type Approval of the Cyclone AX3/503 3 Axis Microlight Aeroplane and Approval for a Permit to Fly
AIRWORTHINESS APPROVAL NOTE NO: 23042 APPLICANT: AIRCRAFT TYPE: REGISTRATION NO: Cyclone Airsports Ltd Cyclone AX3/503 G-MYER CONSTRUCTOR'S NO: CA 001 Type Approval of the Cyclone AX3/503 3 Axis Microlight
ASSEMBLY MANUAL. Kit features. MS:110
MS:110 ASSEMBLY MANUAL Graphics and specifications may change without notice. Specifications: Wing span-------------------------------------------------- 62.9 in---------------------------------------
SD3-60 AIRCRAFT MAINTENANCE MANUAL. This chapter includes information on dimensions, areas, zoning, etc. and is presented as follows:
AMM 6-00-00 1.0.0.0GENERAL 1. General This chapter includes information on dimensions, areas, oning, etc. and is presented as follows: Measurements and Figures which show the stations of fuselage frames,
Assembly Manual. AVIATION Design
SCORPION Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr www.adjets.com Version 01/09/2009 AVIATION
Instruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. JU87-STUKA
STICK F Class 60 Class INSTRUCTION MANUAL. Or Electric equivalent. (2T engine) (4T engine) Radio control model SPECIFICATIONS
Radio control model 45 Class 60 Class (2T engine) (4T engine) Or Electric equivalent INSTRUCTION MANUAL STICK F - 1500 SPECIFICATIONS Wingspan 60 in. Length 38.5 in. Electric Motor 650 Watt Glow Engine.45
Instruction Manual book
book ITEM CODE:BH 115. SPECIFICATION Wingspan : 6,000 mm 236,22 in. Length : 2,740 mm 107,87 in. Weight : 17.5kg 38.5Lbs. Radio : 08 channels. Servo : 07-08 HS-5685MH(HITEC) Battery : 2 Cells-Li-Po 7.4V
71685 Landing Light Kit Installation Instructions
71685 Landing Light Kit Installation Instructions Overview The 71685 Whelen landing light kit is designed to install into the wingtip lens area of an RV. Its important to note that the tip installation
Instruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. JU87-STUKA
FUSELAGE ASSEMBLY SECOND SECTION (of three)
FUSELAGE ASSEMBLY SECOND SECTION (of three) 1 FRONT FLOOR ASSEMBLY The front floor assembly is fabricated from three pieces of the two ply pre-pregnated panel material supplied. The basic floor panel and
MS:183 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
MS:183 ASSEMBLY MANUAL Graphics and specifications may change without notice. Specifications: Wing span ------------------------------79.9in (203cm). Wing area -----------------1165.6sq.in (75.2sq dm).
Page: REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS.
REVISION DESCRIPTION: 1) Page: 32-03 MEMO: Step 4 should not be bold. Fix WD-1213 callout in Figure 3. Page: 32-04 REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS. Add make
MARACANA ASSEMBLY INSTRUCTION .40 ARF LOW WING TRAINER RADIO CONTROL MODEL. Every body can fly
RADIO CONTROL MODEL ASSEMBLY INSTRUCTION MARACANA.40 ARF LOW WING TRAINER Every body can fly VQA085 EP GP You can use both Gas or Electric power Wingspan: 59in.(1520mm) Fuselage length: 48in.(1220mm) Engine:
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist J200/400. Firewall forward components
Jabiru Aircraft Pty. Ltd. Final Inspection Checklist J200/400 Registration No: Aircraft Checklist Pre Ground Test Model: Aircraft Serial No: Firewall forward components Propeller: Prop Size: 60 x 53 Other:
ASSEMBLY MANUAL. Specifications
Kit features. Ready-made minimal assembly & finishing required. Ready-covered covering. Photo-illustrated step-by-step Assembly Manual. ASSEMBLY MANUAL Specifications Wingspan--------------------------------
Kit Manual Components for Pipistrel Sinus & Virus Aircraft. Pipistrel. Sinus & Virus Kit Manual Components SAMPLE
Pipistrel Sinus & Virus Kit Manual Components http:www.pipistrel-usa.com Pipistrel USA 2006 Release 1.0 Page 1 of 70 http:www.pipistrel-usa.com Pipistrel USA 2006 Release 1.0 Page 2 of 70 Table of Contents
TARIF SD-1 "Pièces détachées" 1/7
TARIF SD-1 "Pièces détachées" 1/7 Composite parts 101001 Wing tip, pair 228,00 275,88 101002 Elevator tip, pair 39,00 47,19 101003 Fuel tank complete 279,00 337,59 101004 Cabine hood 198,00 239,58 101005
MEMO. No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2. Warranty
MEMO No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2 Wing Area: 299 sq.in. (19.29 dm ) Weight: 18.9oz. (536.5g) 2 Wing loading: 0.58 oz./sq.ft (27.8g/dm ) Motor: OBL 29/27-07A Warranty
Airframe Group Item Description Part Number Size
Parts List: LS-1 Airframe Group Canopy - LS1 Aluminum sheet, 6061 T6 1241-8.050" x 1.5" 8" Angle, aluminum 6061-T6 987-6 2" x 2" x.125" 6" Bar stock, acetal 42367 1" x 1.25" 3" Bar stock, alum 1125-8 1"
MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No HOW TO ORDER COPIES OF DRAWINGS
SI-382712 BLUEPRINT MOONEY MITE AIRCRAFT DRAWINGS NASM Archives Accession No.1989-0028 HOW TO ORDER COPIES OF DRAWINGS NASM s collection of Mooney M-18 Mite drawings is available to restorers, researchers,
Dassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design
Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
ASSEMBLY MANUAL. Specifications
MS:56H Kit features. Specifications Wingspan ------------------------------ 63 in -------------------------- 160cm. Wing area ----------------------------- 728 sq.in ------------------ 47 sq.dm. Weight
Chapter 55. Stabilizers
Chapter 55 Stabilizers PAGE 1 Table of Contents Chapter Title 55-00-00 GENERAL................................................................................................................ 3 55-21-00
Chapter 55. Stabilizers
Chapter 55 Stabilizers PAGE 1 Table of Contents Chapter Title 55-00-00 GENERAL................................................................................................................ 3 55-21-00
Design and Manufacture by Green R/C Model Airplane Co.,Ltd.
Design and Manufacture by Green R/C Model Airplane Co.,Ltd. Super Tiger Moth Instruction Manual Congratulations on your purchase of this excellent almost-ready-to-fly scale model! Although the plane has
INSTRUCTION MANUAL BOOK
INSTRUCTION MANUAL BOOK ITEM CODE BH57. SPECIFICATION Wingspan: 1,470 mm. 57.87 in. Length : 1,180 mm. 46.46 in. Weight : 2.7 Kg. 5.94 Lbs. Engine : 46 cu.in 2 stroke. 52 cu.in 4 stroke. Radio : 4 channels.
TEMPORARY REVISION NUMBER
TEMPORARY REVISION NUMBER 8 DATED 1 DECEMBER 2011 MANUAL TITLE MANUAL NUMBER - PAPER COPY TEMPORARY REVISION NUMBER 1978 Thru 1986 Model R182 & TR182 Service Manual D2069-3-13 D2069-3TR8 MANUAL DATE 15
ASSEMBLY MANUAL. Specifications
ASSEMBLY MANUAL MS: SEA 82 Graphics and specfications may change without notice. Specifications Wingspan-------------------------------------- 70.9 in------------------------------ 180cm. Wing area-------------------------------------
VENTRIX. Dear Customer, Thank you for purchase our Ventrix Sport jet product
VENTRIX Dear Customer, Thank you for purchase our Ventrix Sport jet product Following you can find greater information for build and fly this model. Before you get started building and setting-up your
TEMPORARY REVISION NUMBER
TEMPORARY REVISION NUMBER 7 DATED 1 DECEMBER 2011 MANUAL TITLE MANUAL NUMBER - PAPER COPY TEMPORARY REVISION NUMBER FR172 Reims Rocket 1968 Thru 1976 Service Manual D849-5-13 D849-5TR7 MANUAL DATE 15 August
Here is the gap seal I used for the flaps, genuine hardware store quality. Note cross sectional shape visible on the right end.
HOMEBUILT AIRCRAFT DRAG REDUCTION - Case Study with a Lancair IV Part 3 Copyright - Fred Moreno - January 2009 Rev. 1 Portions may be reproduced for private, individual use 3- REDUCED AIRFRAME DRAG FOR
Instruction Manual. Specification:
Instruction Manual L O W Specification: Wingspan: 133 cm (52.3 inches) Length : 104 cm (40.9 inches) Weight : 1790gr Engine : 25-32 two stroke Radio : 4 channel - 4 servo W I N G KIT CONTENTS: We have
Assembly Manual For. Wingspan: 88 in Wing area: sp in Length: 78.8 in Engine: 50CC.
Assembly Manual For Wingspan: 88 in Wing area: 1479.8 sp in Length: 78.8 in Engine: 50CC www.pilot-rc.com INTRODUCTION Thank you for purchasing our new 50 cc model. We strive to bring you the most complete
MEMO. Assembly Manual. No Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2. Warranty
MEMO Assembly Manual No. 4347 Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2 Wing Area: 322.4 sq.in. (20.8 dm ) Weight: 14oz.~15oz. (420~430g) Warranty This kit is guaranteed to be free
Assembly and Operating Manual HR-100. Specification: *Length: 41-7/10"(1060 mm) *Wing span: 49-1/5"(1250 mm) *Flying weight: 45.
Assembly and Operating Manual HR-100 Specification: *Length: 41-7/10"(1060 mm) *Wing span: 49-1/5"(1250 mm) *Flying weight: 45.9 oz (1300g) Dear customer, Congratulations on your choice of a factory-assembled
Instruction Manual. Wingspan : 2270mm (89.37 inches) : 1870mm (73.62 inches) : 7400gr gr. : 4 channel - 6 standard servo.
Wingspan : 2270mm (89.37 inches) g Length : 1870mm (73.62 inches) Weight : 7400gr - 7600gr Radio : 4 channel - 6 standard servo Engine : 25cc-35cc KIT CONTENTS: We have organized the parts as they come
INDEX OF MODIFICATIONS DH 82A TIGER MOTH
1 INDEX OF MODIFICATIONS DH 82A TIGER MOTH Night Flying Equipment Introduction of Adapter Plate for Switches 5C/543 2 20.02.33 Instrument Panel To Introduce Alternative Watch Holder 3 29.03.35 Telephone
STORCH. Parts. Additional items needed to complete the Storch
STORCH Parts Fuse with Greenhouse- (Attached) Left and right wing panel Horizontal and vertical stab 2 Wing center blocks 2 Carbon spares for wing 1 Undercarriage with wheels 2 Undercarriage shocks 2 Carbon
MEMO. Assembly Manual. No Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2. Warranty
MEMO Assembly Manual No. 4347 Specification: Wing Span: 29.3 (830mm) Length: 29.8 (845mm) 2 Wing Area: 322.4 sq.in. (20.8 dm ) Weight: 14oz.~15oz. (420~430g) Warranty This kit is guaranteed to be free
Instruction Manual Book
Book ITEM CODE: BH99. SPECIFICATION Wingspan : 2,850 mm 112.20 in. Length : 1,910 mm 75.20 in. Weight : 8.1 kg 17.82 lbs. Parts listing required (not included): Radio : 06 channels. Servo : 08 standard
RECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 1404mm (55.3in) - Length: 1134mm (44. 6 in) - Flying weight: 3.2-3.4 kg - Covering type: Genuine ORACOVER - Spinner size: scale type (not included) - Radio: 4 channel minimum
Assembly and Operating Manual. SPECIFICATION Length inch (640mm) Wing Span inch (705mm) Flying Weight oz (330g)
Assembly and Operating Manual SPECIFICATION Length 25.19 inch (640mm) Wing Span 27.76 inch (705mm) Flying Weight 11.64 oz (330g) Dear customer, Assembly and Operating manual VIPER The Radio Control System