Posi Lock Gear and Bearing Pullers
|
|
- Priscilla Rice
- 5 years ago
- Views:
Transcription
1 Posi Lock Gear and Bearing Pullers Nut recessed to avoid mushrooming and disfiguration from impact. T-handle locks jaws precisely where you set them. A general purpose puller that eliminates the need for many specialty pullers and accessories. One-man operation Locks like a vise Save time, money and labor Cage guides jaws for fast setup, solid contact and superior safety. Leverage up front for vise-like power and no slippage. Model Number Number of Jaws Center bolt threads designed for less effort to apply high torque. Hardened tip. Slim tapered jaws allow for easier gripping and better access to tight spots. Capacity Tons Maximum Reach Spread Range in..25 to 3.25 in in..25 to 3.25 in in..25 to 4.5 in in..25 to 4.5 in in..5 to 5 in in..5 to 5 in in..5 to 7 in in..5 to 7 in in..75 to 12 in in..75 to 12 in in. 1 to 15 in in. 1 to 15 in in. 2.5 to 18 in in. 2.5 to 18 in in. 3 to 25 in in. 3 to 25 in. PH:
2 5 102 PARTS BREAKDOWN Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (dia. 5/16") Snap Ring
3 5 202 PARTS BREAKDOWN Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (dia. 5/16") Snap Ring 10259
4 5 103 PARTS BREAKDOWN Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (dia. 3/8") Snap Ring
5 5 203 PARTS BREAKDOWN Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (dia. 3/8") Snap Ring 10359
6 104 PARTS BREAKDOWN 1. Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 9/16 ) Snap Ring Tip Protector P4
7 204 PARTS BREAKDOWN 1. Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (Dia. 9/16") Snap Ring Tip Protector P4
8 106 PARTS BREAKDOWN 1. Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 5/8") Snap Ring Tip Protector P6
9 206 PARTS BREAKDOWN 1. Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (Dia. 5/8") Snap Ring Tip Protector P6
10 108 PARTS BREAKDOWN 1. Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 3/4") Snap Ring Tip Protector P10
11 208 PARTS BREAKDOWN 1. Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (Dia. 3/4 ) Snap Ring Tip Protector P10
12 110 PARTS BREAKDOWN 1. Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 3/4") Snap Ring Tip Protector P10
13 210 PARTS BREAKDOWN 1. Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (Dia. 3/4") Snap Ring Tip Protector P10
14 113 PARTS BREAKDOWN 1. Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 1 1/8") Snap Ring Tip Protector P13/16
15 213 PARTS BREAKDOWN 1. Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (Dia. 1 1/8") Snap Ring Tip Protector P13/16
16 116 PARTS BREAKDOWN 1. Cage - 3 Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 1 1/4") Snap Ring Tip Protector P13/16
17 216 PARTS BREAKDOWN 1. Cage - 2 Jaw Jaw Jaw Head Assembly - 2 Jaw Pin T-Handle Center Bolt (Dia. 1 1/4") Snap Ring Tip Protector P13/16
18 PMI6 PARTS BREAKDOWN 1. Cage - Jaw Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Slide Rod Slide Hammer (2.5lb) Slide Hammer (5lb) Snap Ring Long Jaw 10554L
19 TB1045 PARTS BREAKDOWN 1. External Cage - 3 Jaw External Jaw Jaw Head Assembly - 3 Jaw Pin T-Handle Center Bolt (Dia. 9/16 ) Snap Ring Tip Protector P4 9. Internal Cage - 3 Jaw Internal Jaw Slide Rod Slide Hammer (2.5lb) Long Jaw 10554L 14. Bolt Extender X4 15. Tip Reducer/Extender HP Small Hub Puller HP Large Hub Puller HP Extra large Hub Puller HP Square Head Set Screw HP Slide Hammer (5lb) 10563
POSI LOCK PULLERS CAGED DESIGN FOR EASE OF USE AND SUPERIOR SAFETY
powerteam.com POSI LOCK PULLERS CAGED DESIGN FOR EASE OF USE AND SUPERIOR SAFETY PT P OS I LOCK PU LLE R S OVE RVI EW ower Team offers a comprehensive line of Posi Lock Pullers, powered manually or P by
More informationCORPORATE PRESENTATION FEBRUARY 2019
CORPORATE PRESENTATION FEBRUARY 2019 1 OUR BUSINESS 2 Posi Lock Pullers are used to remove from a wide variety of equipment 3 Features & Benefits Nut recessed to avoid mushrooming and disfiguration from
More informationTRAVEL MOTOR (CONT'D) Parts Identification
TRAVEL MOTOR (CONT'D) Parts Identification. Snap Ring. Plug. O-Ring. Cover 5. Bushing 6. Drive Shaft 7. Snap Ring 8. Planetary Carrier 9. Sun Gear 0. Snap Ring. Anti-Rotation Washer. Bearing. Planetary
More information9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1, $866 95
93119 9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1,300.79 $866 95 93109 9 Drawer Top Chest - PRO+ Series 26 x 19 x 21 Capacity: 7,130 cu. in. List $745.25 $496 95 93211
More informationG W DISCONTINU. SERVICE TOOLS for COMPANIES, INC. HEAVY DUTY TRUCK TRANSMISSIONS AXLES TIMING BLOCKS gwtoolco.com
G & TOOL W SERVING THE GEAR INDUSTRY OVER 45 YEARS COMPANIES, INC. SERVICE TOOLS for HEAVY DUTY TRUCK TRANSMISSIONS AXLES (FULLER T-9824) G-38: INPUT SHAFT BEARING PULLER Countershaft Front Bearings (#81007)
More information14 Piece 1/4" Dr. Standard
25507A 7 Piece 3/8 Dr. SAE U-Joint Socket Set 3/8" - 3/4" 6 Pt., Mirror chrome finish for maximum resistance against corrosion. Made of premium tool steel and precision heat-treated for maximum durability.
More informationSTEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
More informationRatcheting Pullers Reversible Puller Combination Pullers Slide Hammer Pullers Heavy Duty C-Clamps...
C L A M P I N G & P U L L I N G Ratcheting Pullers... 1137 Reversible Puller... 1139 Combination Pullers... 1139 Slide Hammer Pullers... 1139 Heavy Duty C-Clamps... 1141 General Service C-Clamps... 1142
More informationPULLERS & SEPARATORS
Workshop Solutions PULLERS & SEPARATORS INTRODUCTION Sykes-Pickavant has been at the forefront of providing specialist Workshop Solutions for Industry, for more than 75 years, and this latest catalogue
More informationCompressor - Install (E.40.C.31 - F.10.A.15)
Compressor - Install (E.40.C.31 - F.10.A.15) 1. Set the compressor on its mount and secure into place using the four bolts. Connect the refrigerant suction line (5) and the discharge line (4). Install
More informationA M Supply Co. Hand Tools Specialty Tools. Feeler Gauges Proto 12 Blade Long Feeler Gauge Set. Gauges Blackhawk 25 Blade Alll-Purpose Feeler Gauge
Specialty Tools Feeler Gauges Proto 12 Blade Long Feeler Gauge Set P000SL Gauges Blackhawk 25 Blade Alll-Purpose Feeler Gauge BHKMT-1049 Miscellaneous Blackhawk Holder Retriever Fully Flexable Length BHKZT-1180
More informationMechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING
Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors utomotive Pullers & PULLING & EXTRCTING 337 PULLING & EXTRCTING Toledo Pullers comprehensive range including Mechanical,
More informationREAR AXLE SECTION CONTENTS D DRIVELINE/AXLE RAX-1 C200 M226 RAX
D DRIVELINE/AXLE A SECTION REAR AXLE B C RAX CONTENTS E C200 PRECAUTIONS... 2 Precautions... 2 PREPARATION... 3 Special Service Tools... 3 Commercial Service Tools... 4 NOISE, VIBRATION, AND HARSHNESS
More informationFront Hub and Disc (4WD Model)
4C 8 DRIVE SHAFT SYSTEM Disassembled View Front Hub and Disc (4WD Model) 411RW001 Legend (1) Bolt (2) Cap (3) Snap Ring and Shim (4) Hub Flange (5) Lock Washer and Lock Screw (6) Hub Nut (7) Outer Bearing
More information45 Special Retaining Ring Pliers (shafts) 46 External Circlip Pliers for fitting Grip Rings (shafts) G G2
45 Special Retaining Ring Pliers (shafts) 45 10 170 3.6 mm 45 21 200 2.2 mm Model 45 10 170: for retaining rings with a minimum ring split gap of 3.6 mm Model 45 21 200: angled jaws with centering hole
More informationTRANSMISSION AND TRANSFER CASE
TJ TRANSMISSION AND TRANSFER CASE 21-1 TRANSMISSION AND TRANSFER CASE TABLE OF CONTENTS page MANUAL TRANSMISSION - NSG370...1 AUTOMATIC TRANSMISSION - 42RLE...37 page TRANSFER CASE - NV231...165 TRANSFER
More informationPOSI LOCK Hydraulic Puller Systems INSTRUCTION & PARTS SHEET FOR ALL MODELS IMPORTANT: READ CAREFULLY!
POSI LOCK Hydraulic Puller Systems INSTRUCTION & PRTS SHT OR LL MODLS IMPORTNT: RD CRULLY! IMPORTNT RCIVIN INSTRUCTIONS: Visually inspect all components for shipping damage. Shipping damage is not covered
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More information1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
More informationHeat treated cylinder wall and chromed piston
JULY AUG SEPT 2015 AXLE OIL DRAIN PAN MODEL 8830 & 8831 Catches Oil from hubs after removing the cap Fits on the rims of buses, trailers and large trucks Prevents an oil mess during wheel repair Side opening
More informationNew HAZET Range of Pullers / Extractors
17 17 New HAZET Range of 2-Arm Pullers 3-Arm Pullers Hydraulic Pullers Ball Bearing Extractors Separators Internal Extractors Forged Quality Practical and Proven Tools New Innovative Range of Pullers For
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More information1.28 ACCESSORY DRIVE. Accessory Drive Assembly Related Parts (Former Design) SERIES 60 SERVICE MANUAL. 1. Locknut 8. Drive Gear
SERIES 60 SERVICE MANUAL 1.28 ACCESSORY DRIVE The accessory drive assembly is mounted to the front of the gear case cover and utilizes a two-groove pulley to drive the alternator. See Figure 1-413, and
More information2003 Dodge Pickup R DRIVE AXLES' 'Axle Shafts - Front - Ram Pickup WD DRIVE AXLES
2002-04 DRIVE AXLES Axle Shafts - Front - Ram Pickup 1500 4WD DESCRIPTION Vehicles equipped with 4WD and C205F front axle assembly use equal length axle shaft system to deliver power from front differential
More informationC3 Syncro Drive Proclimb 1100 Installation Instructions
Revision 4 Nov 8-2013 201A Old Town Road, Sicamous, BC. V0E 2V4 Ph 250-833 3538 Fax 888-716 5903 www.c3powersports.com Thank you for purchasing a ProClimb M, ProCross F & XF SyncroDrive Note: This modification
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationLineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips
Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Extra Measure of Reliability Fiberglass Handle and Polyester Webbing Provides added nonconductive material when using proper hot line handling
More informationPage 1 of 5 Section 05-03A: Axle, Front Drive, Dana Models 44 and 50 1996 Bronco/F-Series Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/19/2000 Spindle, RH and LH Shaft and Joint
More information4. Front and Rear Drive Shafts
4-2 SERVICE PROCEDURE 3. Rear Axle (FWD) - Tightening torque: 186±20 N m (19±2 kg-m, 137±14 ft-lb) Use a new axle nut. Always tighten axle nut before installing wheel on vehicle. If wheel is installed
More informationHydraulic Gear Puller Instruction Manual
+ HGP053-M0_052015 Hydraulic Gear Puller Instruction Manual MODELS: HGP053 HGP103 HGP153 HGP253 HGP503-5 Ton Capacity -10 Ton Capacity -15 Ton Capacity -25 Ton Capacity -50 Ton Capacity SFA Companies 10939
More informationModule 6: Air Foundation Brakes
Air Brakes Terms and Definitions Basic Components That Make Up Air Foundation Brakes Types of Air Foundation Brakes Parts of a Cam Foundation Brake Parts of a Wedge Foundation Brake Parts of a Disc Foundation
More informationCOLT 2310, 2510, AND 2712 COM PACT TRACTORS CHAPTER 7 BEARINGS, SEALS, GASKETS
COLT 2310, 2510, AND 2712 COM PACT TRACTORS CHAPTER 7 BEARINGS, SEALS, GASKETS END PLAY SEE SPECIFICATIONS "A" SHIM C" GASKET "B" STEEL WASHER IF REQUIRED 7-A-l Figure 7-A-l illustrates the correct assembly
More informationREMOVAL AND INSTALLATION
412-03-1 Air Conditioning 412-03-1 REMOVAL AND INSTALLATION Clutch and Clutch Field Coil Special Tool(s) 2-Jaw Puller 205-D026 (D80L-1002-L) or equivalent Special Tool(s) Installer, A/C Compressor Field
More information00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
More informationRugby Manufacturing Hoist Cylinder Bulletin. Preface Technical Service Bulletin
Preface Technical Service Bulletin This bulletin applies to the following hoist models: LR-310 LR-3510 LR-3510A LR-416 LR-416B LR-165 LR-165A LR-25 LR-25A LR-525 LR-26B LR-26C LR-27B LR-623 LR-28A LR-2066
More informationRIDGID Wrenches 1.1. Page. Wrench Type
RIDGID Wrenches Time-tested designs. Often imitated, never duplicated. Efficient designs to improve productivity. Innovative to provide new solutions to old problems. Wrench Type of Nom. s Size (in.) (in.)
More informationNorthstar RIM Tach Steps to Installation. K Wheel (Clamp Style)
Northstar RIM Tach 8500 10 Steps to Installation K Wheel (Clamp Style) Mill Duty High Performance & Rugged Most Reliable magneto-resistive digital tach on the market today Ductile Iron Housing & Stainless
More informationCirclip Pliers to assemble internal circlips into bores 44
Circlip Pliers to assemble internal circlips into bores 44 > for fitting circlips into bores, range of application from 8 1 0 mm dia > solid style, forged > non slip, solid tips > pliers body and tips:
More informationInstallation, Operating and Maintenance Instructions. Rotating Machine Screw Actuators. With Parts List Publication Part No.
Installation, Operating and Maintenance Instructions With Parts List Publication Part No. SK-2389-R1 Rotating Machine Screw Actuators 1/4 Through 1-Ton Capacity Caution This manual contains important information
More informationA/C COMPRESSOR SERVICING Article Text 1991 Saab 9000 For Copyright 1997 Mitchell International Friday, October 15, :22PM
Article Text ARTICLE BEGINNING 1991 GENERAL SERVICING Compressor Service * PLEASE READ THIS FIRST * CAUTION: When discharging air conditioning system, use only approved refrigerant recovery/recycling equipment.
More information$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
More informationMaintenance Information
16573347 Edition 2 February 2014 Air Grinder Series 88H Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationKeyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors
Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose
More informationNEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
More informationTransmission Overhaul Procedures-Bench Service
How to Install the Auxiliary Countershaft Assembly Special Instructions To make auxiliary section assembly easier, you can make an auxiliary section fixture out of a 2" x 12" piece of wood. 3' 1' 3" 4.56"
More informationWH Ford 2WD Steering System #2013/2015 Date 02/15/04 rev. 1
Phone (209) 400-7200 Fax (209) 943-7923 www.wildhorses4x4.com WH Ford 2WD Steering System #2013/2015 Date 02/15/04 rev. 1 Basic system notes: This system works on 1966-1977 Broncos with manual steering
More informationTCX575 & TCX565 Advanced Conventional Tire Changing Systems
TCX575 & TCX565 Advanced Conventional Tire Changing Systems Key features at a glance Bead Press System Tremendous power and control Aids mounting and demounting Auto-centering simplifies operation Swing-Arm
More information1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
More informationSPOT DRILL & DRILL BITS
SPOT DRILL & DRILL BITS 69 STPSET3 STEP DRILL SET 3 Pc SM19PB METRIC DRILL SET 1mm to 10mm 19 Pc SM25RPB METRIC DRILL SET REDUCED SHANK 1mm to 13mm 25 Pc Ideal for preparing bumpers for reversing sensors
More informationARTICULATING WORK STATION JIB CRANES
ARTICULATING WORK STATION JIB CRANES CAPACITIES: SPANS: APPLICATIONS: Up to 2000 lbs Up to 16' Reaching around or under obstructions Reaching through doorways Articulating Jib Cranes Versatile enough to
More informationLifecycle Upright Bikes LC95, LC91, LC85, C9, C7, 95Ce, 95Ci, 93Ci, and 90C How To... Replace the Intermediate Pulley Shaft and Bearings
How To... Replace the Pulley Shaft and s Special Service Tools: Service Tool Kit Part Number: ToolKit 1. Remove the side covers. Refer to, How To Remove Pedals, Pedal Levers, and Side Shrouds. Main Drive
More informationHAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since
GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty
More informationSpecialty Tools & Ergonomic Equipment Catalog
Specialty Tools & Ergonomic Equipment Catalog Staff Electric Co., Inc. November 2009 Volume 1, Issue 1 Table of Contents Task Page WIRE PULLING FEEDERS Section 1 3 Through 29 Equipment Checklist Wire Pullers
More informationMAINTENANCE TOOLS. Equipping you to install, remove and service bearings, gears, wheels and other industrial and automotive parts.
MAINTENANCE TOOLS Equipping you to install, remove and service bearings, gears, wheels and other industrial and automotive parts. CONTENTS: User Safety Instructions.....................................3
More information2007 Hummer H Driveline/Axle Wheel Drive Shafts - H3. Fastener Tightening Specifications Specification Application
2007 Driveline/Axle Wheel Drive Shafts - H3 SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Specification Application Metric English Front Wheel Drive Shaft Nut 260
More informationMiniature Soft Seat Fluid Pressure Regulator
Instruction Sheet P/N 1. Description The Nordson miniature soft seat fluid pressure regulator is designed for use with hydraulic and pneumatic medias. The regulator body and wetted parts are constructed
More informationSAGINAW P-SERIES PUMP INSTALLATION
SAGINAW P-SERIES PUMP INSTALLATION WARNING Failure to read and follow these instructions will void any warranty, can cause severe damage to power steering components and premature failure. Pump internals
More informationSECTION D Fuel Charging and Controls Turbocharger
303-04D-i Fuel Charging and Controls Turbocharger 303-04D-i SECTION 303-04D Fuel Charging and Controls Turbocharger CONTENTS PAGE Turbocharger... 303-04D-2 303-04D-2 Fuel Charging and Controls Turbocharger
More informationWheel Balancer Accessories
Wheel alancer ccessories Wheel mounting kits & accessories Why use collets? Precise wheel balancing relies on two critical conditions: accurate center mounting and distortion-free clamping while providing
More informationMaintenance Information
16606022 Edition 3 May 2014 Air Drill 728 Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially
More informationMaintenance Information
45528270 Edition 1 June 2007 Barring Motor T480 Series Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing maintenance on this Barring Motor.
More informationWheel Balancer Accessories
Wheel alancer ccessories Wheel mounting kits & accessories Why use collets? Precise wheel balancing relies on two critical conditions: accurate center mounting and distortion-free clamping while providing
More informationSU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355
SU-16C and SU-16CA Exclusive Parts Part# 202 Exchange Only 355 384 357 402 137 103 365 438 367 367 434 294 480 481 202 103 C-BARREL 137 GAS BLOCK FRONT SIGHT 202 RECEIVER RECEIVER SCREW 294 O'RING 355
More informationPanel Beating Hammers
PANEL & TRIM Panel Beating Hammers n Polished forged, induction hardened hammer heads n Quality hickory timber handles wedged to heads for safety and retention 313055 313058 313056 313059 313057 313060
More informationCAUTION: Use a rag at the point you are going to pry. because aluminum alloy wheels can be easily damaged.
Front Suspension Knuckle/Hub Replacement NOTE: Use only genuine Honda aluminum wheel weights. Non-genuine aluminum wheel weights may corrode and damage aluminum wheels. Remove the center cap by prying
More informationXK8. Steering Rack Oil Seal/Pinion Valve Housing Replacement
SERVICE XK8 DATE 2/98 Amended 11/99 TECHNICAL BULLETIN Steering Rack Oil Seal/Pinion Valve Housing Replacement Remove and destroy Bulletin 211-02, dated 2/98. Replace with this Bulletin. Revisions are
More informationP Series Puller 1000 and 2000 lb Capacity
P Series Puller 1000 and 2000 lb Capacity Features / Wire Puller: 4:1 design factor. Meets SM 30.21. Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. ll steel parts
More informationBRAKE SYSTEM Nissan 240SX DESCRIPTION BRAKE BLEEDING * PLEASE READ FIRST * BLEEDING PROCEDURES ADJUSTMENTS BRAKE PEDAL HEIGHT SPECS TABLE
BRAKE SYSTEM 1990 Nissan 240SX 1990 BRAKE SYSTEMS Nissan Disc & Drum Axxess, Maxima, Pathfinder, Pickup, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION All brake systems are hydraulically operated
More informationThank you for choosing IAG Performance. Please follow the instructions below for an easy installation. 1. Start by draining the transmission fluid.
IAG Performance Transfer Gears Installation Part# IAG-DRV-1000, IAG-DRV-1010 Tools Required: 12mm Wrench, 3/8 Torque Wrench, 14mm Wrench, 3/8 ratchet, 12mm Socket, 14mm Socket, 17mm Socket, 3/8 x 8 extension,
More informationMANUAL TRANSMISSION SECTION MT CONTENTS TRANSMISSION/TRANSAXLE MT-1 SERVICE INFORMATION POSITION SWITCH...13 Checking...13
TRANSMISSION/TRANSAXLE SECTION MT A B MANUAL TRANSMISSION MT D CONTENTS E SERVICE INFORMATION... 2 PRECAUTIONS... 2 Service Notice or Precaution...2 PREPARATION... 3 Special Service Tool...3 Commercial
More informationMinimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationREMOVAL TF REMOVE TRANSFER INDICATOR SWITCH (a) Remove the switches and gaskets. HINT: Indicator switch:
20 NO. 1 NO. 2 F043499 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag
More informationFLOWSERVE CORPORATION NOBLE ALLOY VALVE PISTON CHECK VALVE REPAIR INSTRUCTIONS
FLOWSERVE CORPORATION NOBLE ALLOY VALVE PISTON CHECK VALVE REPAIR INSTRUCTIONS Cookeville Valve Operation 1978 Foreman Drive Cookeville, TN 38541 PH: 800-251-6761 931-432-4021 FAX: 931-432-5518 PISTON
More informationMaintenance Information
16575128 Edition 2 May 2014 Air Grinder, Sander or Polisher 77A Series Maintenance Information Save These Instructions Product Safety Information Failure to observe the following warnings, and to avoid
More informationMaintenance Information
16573370 Edition 2 February 2014 Air Grinder 99V Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationFRONT AXLE SECTION FAX CONTENTS TRANSMISSION & DRIVELINE FAX-1 PRECAUTION... 2 REMOVAL AND INSTALLATION... 6 PREPARATION... 3
TRANSMISSION & DRIVELINE SECTION FAX A FRONT AXLE B C FAX CONTENTS E PRECAUTION... 2 PRECAUTIONS... 2 Precaution...2 PREPARATION... 3 PREPARATION... 3 Special Service Tool...3 Commercial Service Tool...3
More information$1.00 FOR THE TQIO/RCIO
$1.00 FOR THE TQIO/RCIO m mm HDBBYSHOP Champion Jay Halsey has an impressive track record. One of Jay's advantages is a whisper smooth tranny thanks to his dad, Jim. Now you can build a Halsey transmission!
More informationParking Brake Shoe: Adjustments
1997 Ford Truck F 350 2WD Pickup V8-460 7.5L VIN G EFI Copyright 2007, ALLDATA 9.50 Page 1 Parking Brake Shoe: Adjustments Transmission-Mounted Parking Brake Disassembly 1. Remove the Parking brake assembly
More informationTerminology. There must be a better way to build a chuck. -A.I. Jacobs, Jacobs. Chuck. Chucks and Keys. Toolholders
Jacobs It s hard to believe that a set of bruised knuckles was the impetus for one of the most significant industrial advancements in the 20th Century. Arthur Irving Jacobs was never one for leaving things
More informationTube Removal Tools. Tube Pulling Systems & Pumps. Tube Pulling Pumps & Accessories
Tube Removal Tools Tube Pulling Systems & Pumps Tube Pulling Systems consist of: 1. Pump Assembly - air/hydraulic or electric/hydraulic (includes hose assembly) 2. Ram Assembly - gripper or spear type
More information2006 Dodge RAM of 10 11/15/ :03 PM REMOVAL. Subarticles. Submodel: SLT Engine Type: V8 Liters: 5.7 Fuel Delivery: FI Fuel: GAS
EAR-PINION/RING - REMOVAL AND INSTALLATION 1 of 10 11/15/2012 12:03 PM 2006 Dodge RAM 1500 Submodel: SLT Engine Type: V8 Liters: 5.7 Fuel Delivery: FI Fuel: GAS Subarticles GEAR-PINION/RING - REMOVAL GEAR-PINION/RING
More informationUsed for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
More informationJACKS & LIFTS JACKS & LIFTS BOTTLE JACKS JACK STANDS JACKS & LIFTS JACK PACKS JACKS & LIFTS UNDER HOIST STANDS. Bottle Jacks - Stands
BOTTLE JACKS TEQ Correct Professional 12 Ton Short Professional Bottle Jack EQP 3113 JACK STANDS Low Height: 12 3/16" Raised Height: 18 7/8" TEQ Correct Professional 3 Ton Ratcheting Professional Series
More informationMGM Brakes Service Manual
MGM Brakes Service Manual MODEL LTR-T - 2.50 Pre 6/1/98 MODEL LTR-T - 2.50 Post 5/31/98 MODEL LTR-L3-3.00 For: Long Life Integral Release Bolt Double Diaphragm Spring Brakes Several design improvements
More informationTITAN REFINERY WRENCH
TITAN REFINERY WRENCH 45 The TITAN REFINERY WRENCH is a combination pipe wrench /valve wheel wrench designed for multiple uses in the refining, petrochemical, and gas processing industries. PIPE WHEEL
More informationEZ Lift Manual Products Innovation... Performance... Reliability www.meerholzcanada.ca EZ Lift Manual Chain Hoists RM Series II Manual Chain Hoist 10 ft (3 m) standard lift. Hand chain is 2 ft (0.5 m)
More informationBearing install tool Spacer disassembly tool Spacer disassembly tool. Handle Puller slide hammer Puller
Bearing install tool Spacer disassembly tool Spacer disassembly tool Handle Puller slide hammer Puller 5th gear lock tool E-ring install tool -98- Chapter 6 Propeller Shaft Universal joint This propeller
More informationATTENTION ADVANCE SERVICE BULLETIN INFORMATION
SUBJECT: NO: 21-10-98 Loss Of Fifth Gear GROUP: Transmission EFFECTIVE DATE: Sep. 11, 1998 CHRYSLER MAIL MANAGEMENT SYSTEM DATE: AUG. 28, 1998 ATTENTION ADVANCE SERVICE BULLETIN INFORMATION The following
More informationMaintenance Instructions
General Note These instructions contain information common to more than one model of Bevel Gear Drive. To simplify reading, similar models have been grouped as follows: GROUP 1 Models 11, 0, 1,, (illustrated),,
More informationOverhead Products. Overhead Products Introduction. Model Q Lasher. Eagle Lasher Series Series
Introduction In 2006, DCD Design took on the Spinning Equipment Company and began producing the Lineman and Eagle cable lashers. In doing so, DCD took on a long history of quality and innovation. These
More informationDistributed by Tri-State Equipment Company Inc
COFFING LHH Models - Stamped steel hand chain hoists are an excellent low cost option in the Coffing line. The compact, lightweight design is ideal for construction and contractor applications where portability
More informationTCX575 Leverless Tire Changer with Bead Press System
TCX575 Leverless Tire Changer with Bead Press System Key features at a glance Bead Press System 3 Tremendous power and control 3 Aids mounting and demounting Auto-centering simplifies operation Swing Arm
More informationSA 8 FRONT AXLE HUB COMPONENTS
SA8 FRONT AXLE HUB COMPONENTS SA9 REMOVAL OF FRONT AXLE HUB 1. REMOVE COTTER PIN, LOCK NUT CAP AND BEARING LOCK NUT (a) Remove the cotter pin and lock nut cap. (b) Loosen the bearing lock nut while depressing
More informationTCX57 & TCX56 Advanced Conventional Tire Changing Systems
TCX57 & TCX56 Advanced Conventional Tire Changing Systems Key features at a glance Bead Press System Tremendous power and control Aids mounting and demounting Auto-centering simplifies operation Swing-Arm
More informationBearing and Seal Installation Tool T1 Clutch Assembly Stand X X X X Shift Handle Tool X X T Bearing Cup Driver X X
Bravo Sterndrive Bravo Sterndrive Tool Application Chart Part No. Description Bravo One Bravo Two Bravo Three Blackhawk 11 24156 Hex Nut 12 34961 Washer 91 12427 Shift Cable Adjustment Tool 91 17256 Bearing
More informationFig Variable Speed Valve Parts
5 DISASSEMBLY OF VARIABLE SPEED CONTROL VALVE (Seal Replacement with Control Valve in the Bobcat). Remove seat and seat plate (Fig. ).. Remove variable speed control lever linkage rod. 3. Remove temperature
More informationADVANCED. Grips & Attachments.
www.worldoftest.com/gaugegrips.htm Qualitest grips and attachments are integral components of testing systems, designed for a wide range of tension, compression, and torque applications. These grips and
More informationTCX57 & TCX56. Advanced Conventional Tire Changing Systems NEW!
TCX57 & TCX56 Advanced Conventional Tire Changing Systems NEW! Key features at a glance Bead Press System 4 Tremendous power and control 4 Aids mounting and demounting 4 Auto-centering simplifies operation
More informationRS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items
www.rocheleautool.com RS Series Reciprocating Screw Blow Molding Machines For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items RS-70 with Tail Puller
More informationDISASSEMBLY AND ASSEMBLY
205-03-1 Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 205-03-1 DISASSEMBLY AND ASSEMBLY Axle Front Drive Special Tool(s) 2-Jaw Puller 205-D072 (D97L-4221-A) Special Tool(s) Carrier Bearing Replacer
More information