SKU Product Name Price Body & Sheet Metal Fasteners

Transcription

1 Classic & Exotic Service, Inc Heide, Troy MI USA Phone: WWW: SKU Product Name Price Body & Sheet Metal Fasteners CAD-0123 CAD-0124 CAD-0125 Cadillac 5/16-18 x 1/2 Hex Nut Fender bolt hex nut for V8 V12 V16 Cadillac and LaSalle. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Nut Qty 18 Application 341; Group Nut On Brace Screw Qty 4 Application 345C 355C 370C 452C ; Group Nut Qty 16 Application A AD 370AD 452AD ; Group Nut Fender Step Screw Qty 3 Application ; Group Nut On Moulding Screw Qty 12 Application 345BC 355BC 370BC 452BC; Group Nut Qty 6 Application D 370D 452D ; Group Nut Qty 11 Application 355D 370D 452D 36-90; Group Nut Qty 4 Application Material: Steel; Finish: Black Oxide; Thread: 5/16-18; Hex:.500; Length:.460. Cadillac 5/16-24 x 1/2 Hex Nut 5/16-24 Hex nut for attaching mud pan shelves on Cadillac V8 V12 and V16. Finished in black oxide to prevent rust. Cadillac part number alternative group number Listed in the Cadillac parts book as:group Nut Qty 24 Application 345BC 355BC 370BC 452BC Material;Finish:Black oxide;thread:5/16-24;hex:.500;length:.460. Cadillac 5/16-18 x 7/8 Sheet Metal Hex Bolt Hex bolt for attaching fenders and other body panels on V8 V12 V16 Cadillac and LaSalle. Used from Finished in black oxide to prevent rust. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Attaching Battery Support Screw Qty 2 Application A; Group Attaching Corner Shield Screw Qty 18 Application 341 (Note: To body and rear fender); Group Attaching Dust Shield Screw Qty 32 Application ABC ABC 370ABC 452ABC (Note: To fender running board and battery box); Group Attaching Front Fender Screw Qty 2 Application (Note: To body and running board 10 used for front fender to side bar before chassis used for front end of front fender to side bar after chassis on 314); Group Attaching Rear Fender Screw Qty 32 Application AB 355B 370AB 452B (Note: To body gasoline tank cover and running board); Group Filler Plate And Bracket Screw Qty 2 Application ; Group Attaching Valance Screw Qty 13 Application 355D (Note: 5 used on 355D); Group Attaching Mud Pan Shelves Qty 2 Application A A 370A 452A; Group Attaching Running Board Screw Qty 13 Application A A 370A 452A (Note: To hangers on side bar); Group Extension To Running Board Screw Qty 4 Application Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.125; Length under head:.875; Thread length:.781; Hex:.500; Head:.250. $ 3.00 $ 3.75 $ /20/17. Prices subject to change. Page 1/18

2 CAD-0126 CAD-0127 CAD-0128 MAS-0015 MISC-0125 P-0033 Cadillac 5/16-18 x 1 1/8 Sheet Metal Hex Bolt Hex bolt for attaching fenders and other body panels on V8 V12 and V16 Cadillac and LaSalle. Used from 1927 through Finished in black oxide to prevent rust. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Attaching Corner Shield Screw Qty 14 Application 341 (Note: To body and rear fender); Group Attaching Front Fender Screw Qty 12 Application (Note: Front fender to running board - 15 used on 350); Group Attaching Front Fender Screw Qty 2 Application (Note: To body); Group Brace To Front Fender And Side Bar Screw Qty 4 Application 345C 355C 370C 452C; Group Attaching Rear Fender Screw Qty 54 Application (Note: To body running board and gasoline tank cover); Group Attaching Valance Screw Qty 9 Application D 370D 452D 36-90; Group Attaching Mud Pan Shelves Screw Qty 1 Application 353; Group Attaching Running Board Screw; Qty 30 Application 350 (Note: To fenders); Group Extension To Running Board Screw Qty 4 Application Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.375; Length under head: 1.125; Thread length:.875; Hex:.500; Head:.250. Cadillac 5/16-18 x 3/4 Sheet Metal Hex Bolt Hex bolt for attaching fenders and other body panels on Cadillac V8 V12 V16 and LaSalle. Used from Finished in black oxide to prevent rust. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Screw Attaching Dust Shield Qty 26 Application D 370D 452D (Note: To fender and running board); Group Attaching Front Fender Screw Qty 4 Application 355D 370D 452D (Note: To support); Group Screw For Step Qty 3 Application ABC 370ABC 452ABC; Group Screw For Filler Plate And Bracket Qty 4 Application D 370D 452D 36-90; Group Screw For Attaching Mud Pan Shelves Qty 11 Application 355D 370D 452D Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.00; Length under head:.750; Thread length:.656; Hex:.500; Head:.250. Cadillac 5/16-24 x 7/8 Sheet Metal Hex Bolt Hex bolt for attaching front fenders and corner shields on Cadillac V8. Finished in black oxide to prevent rust. Cadillac part number Alternative group number Listed in Cadillac parts book as: Group Screw Attaching Corner Shield Qty 4 Application 341 (Note: To frame); Group Screw Attaching Front Fender Qty 12 Application 314 (Note: To frame and box shields). Material: Steel; Thread: 5/16-24; Finish: Black oxide; OAL: 1.125; Length under head:.875; Thread length:.781; Hex:.500; Head:.250. Maserati Ghibli Push And Twist Fastener Plated steel ''push and twist'' style fastener. Used to secure the air closeout panel in front of the radiator on Maserati Ghibli. Material: Steel; OAL: 1.051; Head OD:.625; Length under head:.953; Shaft OD:.250; Shaft OD large: Trim Retaining Tee Bolt Trim retaining steel tee bolt designed to slide into a hollow molding. Has many applications including use on Ghia bodied automobiles. Measures: 13/16 long; head is 1/4 x 3/8 x 1/16 thick; 8-32 thread. T-Nut for Attaching Body Sheet Metal Steel t-nut with 5/16-24 thread. Has 2 3/16 holes for attaching to body sheet metal. Used on Packard and other cars to hold rear fenders to the body. $ 3.00 $ 3.00 $ 3.00 $ $ $ Page 2/18 11/20/17. Prices subject to change.

3 Bumper BUMP-0003 Cromos Bumper Medallion Medallion to fit in the center of Cromos bumpers. Made of bronze and reproduced from an original medallion. Suitable for use on the front or rear bumper. Measures 2 3/4'' x 2 1/4'' and has a 7/16-20 threaded mounting stud on the back. $ BUMP-0006 Cromos Bumper End Cap Cromos bumper end cap. Used on many European custom bodied cars in the 1930's including Hispano Suiza J12 and others. BUMP-0007 Cromos Bumper End Cap, Plain Cromos bumper end cap without script. Used on many European custom bodied cars in the 1930's including Hispano Suiza J12 and others. BUMP-0008 Cromos_Center Cromos_End HIS HIS HIS-0153 HIS-0162 RR-0004 RR-0105 Cromos Bumper Center Rubber Shield Rubber center piece for the front and rear of Cromos bumpers. Used on many European custom bodied cars in the 1930's including Hispano Suiza J12 and others. Material:Urethane;Base:120mm;Height:128mm;Overall thickness:77mm;clip length x width:120mm x 39mm;Gap width:6.5mm. Cromos Bumper Center Cromos bumper center for front or rear large bumper. This new production piece will fit a 3 1/4 octagon tube. For use on Delahaye, Delage, Minerva, Bugatti and others. Cromos Bumper End Piece Cromos bumper end piece for front or rear large bumper. This new production piece will fit a 3 1/4 octagon tube. For use on Delahaye, Delage, Minerva, Bugatti and others. Hispano Suiza J12 Front Bumper Mounting Bracket Style 1 Front bumper mount for use on Hispano Suiza J12. Material: Steel; Finish: Natural; Length: 5.852; Width: 6.110; Thickness:.250; Holes in end:.400; Med hole ID:.474; Large hole ID: Hispano Suiza J12 Front Bumper Mounting Bracket Style 2 Hispano Suiza J12 front bumper mounting bracket. Material: Steel; Finish: Natural; Length: 5.274; Width: 5.87;3 Thickness:.250; Large hole ID: 1.190; Other holes ID:.400. Hispano Suiza Bumper Bracket Bolt Steel bolt for the bumper bracket of Hispano Suiza J-12. Hispano Suiza part number B4597. Material: Steel; Finish: Natura;l Thread: M10 x 1.5; Thread length: 20mm; OAL: 47mm; Hex: 14mm; Head height: 6mm; Length under head: 41mm. Hispano Suiza J12 Bumper Bolt M Heat treated steel hex bolt with M thread. Suitable for use in many European automobiles of the mid 1930's. Used specifically as a bumper bolt on Hispano Suiza J-12. Material:4140 Steel, heat treat grade 8;Finish:Natural;Thread:M ;Thread length:20mm;hex:14mm;oal:51mm;length under head:44mm. Rolls Royce Phantom I II Bumper Center Spacer CNC Machined steel front and rear bumper spacer for use on Rolls Royce Phantom I and Phantom II Brewster bodied cars. Spacer fits between back bar and face bars where the center medallion attaches. Rolls Royce Phantom II 1/2-16 BS Stud 1/2-16 BS Stud for use on Rolls Royce Phantom II. Used for bumper to frame connections. Material: 4140 Steel, heat treat grade 5; Finish: Manganese phosphate; Thread: 1/2-16 BS; Thread lengths:.500,.500; OAL: 1.500; OD:.495. $ $ $ $ $ $ $ $ /20/17. Prices subject to change. Page 3/18

4 Door TUC-0004 V-0007 BODY-0001 BODY-0002 BODY-0004 Tucker Rear Bumper Stencil Sandblasting and painting stencil to apply the Tucker logo to the rear bumper above the license plate. Recreated from an original Tucker, this stencil preserves the stencil marks absent from many reproductions. This self-adhering stencil is applied to the bumper section. Then the bumper section is sandblasted to provide a surface paint will adhere to. The stencil is left in place and painted over. Once the paint is dry the stencil is removed and the lettering will remain. Voisin 6 Cylinder Bumper End Rubber molded bumper end with steel core for use on Voisin 6 cylinder. May also fit other years and models. Price includes a $50.00 core charge to be refunded upon receipt of a usable core. Material: Rubber & Steel; Finish: Natural; Molded rubber: approx x 4.125; Steel core: x 2.000; Hole ID:.437. Exterior Door Handle Cast bronze door handle with steel shank. Used on many custom bodied cars in the 1920's and 1930's including Duesenberg Model J and Derham Coachwork cars. Handle and shank are threaded to screw together. Shank should be silver brazed in place after fitting and before plating. Handle can be supplied with shank brazed in place for an additional $15.00 charge. For use with bezel our part number BODY Material: Bronze handle, steel shank; Shank: 7/16-20 thread, 5/16 square x 3 7/8; Handle: long,.935 wide, high. Exterior Door Handle Bezel Cast bronze door handle bezel used on many custom bodied cars in the 1920's and 1930's including Duesenberg Model J and Derham Coachwork cars. Original part number For use with door handle, our part number BODY Length: 2.100; Width: 1.200; Height:.410; Mounting holes: 1.500, centers for #10 screws. Door Handle Bezel Spring Lock Washer Laser cut spring steel lock washer for use with the door handle bezel on Cord L-29 and others. Material: 1095 Spring steel; Finish: Natural; Thickness:.020; OD:.896; ID:.500. $ $ $ $ BODY-0007 Door Handle, Willoughby Coachwork Door handle for use on Willoughby bodied cars. Sold as shown, requires finishing for use. $ BODY-0009 CAD-0140 COR-0038 Door Latch Lock Set Arm Door latch lock set arm for use on Ternstedt Manufacturing door latches that are locked by a lock cylinder in the door. Used on many prewar automobiles. Material:Carbon steel;finish:natural;thickness:.056;slot length:.482;slot width:.196;hole ID:.190;Approx. OAL:3.540;Approx. OAW: Cadillac Door Light Switch Chrome plated door jamb switch for use on Cadillac. Material: Stee;l Finish: Chrome; Bracket: x 1.125; Bracket holes, centers:.190, 1.375; Button OD:.375; Button height:.359. Cord Door Hinge Screw Door hinge screw for use on Cord 810 and 812. Material: Steel; Finish: Black oxide; Thread: 5/16-24; Thread length:.474; OAL:.633; Slot width:.084; Slot depth:.089. $ $ $ 6.25 Page 4/18 11/20/17. Prices subject to change.

5 MB-0003 MB-0020 MB-0023 Murphy Body Door Bumper Sockets Murphy body door bumper sockets CNC machined from solid aluminum. Two lengths available - can be shortened to fit a specific application. Both sockets have.030 lip to overlap the door jams. Style #1 Outside width: 1.355; Outside length: 1.719; Height:.488. Style #2 Outside width: 1.355; Outside length: 1.106; Height:.488. Murphy Body Footman Loop Bronze footman loop used on many Murphy bodied cars. Used to hold door check strap to door and body. Material: Bronze; Finish: Natural; Length: 3.105; Width:.632; Height:.687; Stud holes:.272; Hole centers: 2.375; Bar length: Murphy Coachwork Door Handle Bezel Murphy coachwork door handle bezel. This screws into the door and was used on many Murphy bodies. May also fit other pre-war car coachwork. Material: Brass; Finish: Natural; Thread: 3/4-16 x.576; OAL:.738; OD:.875 and.745; ID:.672 and.536. $ $ $ MISC-0022 Molded Rubber Round Door Bumper Molded rubber round door bumper. Many applications on antique & classic vehicles including Delage of the 1930's. OD: 1 1/8; Height: 9/16. $ Fenders MISC-0068 MISC-0069 MISC-0274 MISC-0277 MISC-0310 MISC-0324 Dovetail Door Bumper Sockets.Ideal door bumper socket. New fully machined aluminum part to replace original die cast Ternstedt Mfg. Co. part. Used with a steel capped rubber bumper, this dovetail socket has four mounting holes to hold the socket to the car body, has four holes tapped for 8-32 screws to retain the cover plate and two pockets for bumpers. Available in two pocket sizes: 1/2'' or 5/8''. Outside dimensions: 3'' long x 1 11/32 wide x 5/8 high. Interior dimensions: 1 1/8 x 9/16 deep. Hooper Body Door Hinge Bolt Steel door hinge bolt for use on Hooper bodied cars of the 1920's and 1930's. Material: 4140 Steel; Finish: Natural; Thread: BSF 5/16-22; Thread length:.387; OAL: 1.667; Length under head: 1.425; Head OD:.768; Shaft OD:.387; Square:.305. Hooper Body Door Hinge Screw This M7 x 1.00 door hinge screw has an oversized shank for repairing worn hinges. For use on Hooper bodied cars of the 1920's and 1930's. Material: Steel; Thread: M7 x 1.00; Thread length: 8mm; OAL: 26mm; Head OD: 9mm; Head height: 5mm; Shaft: 7mm; Length under head: 21mm. Door Bumper Retaining Bracket Laser cut retaining bracket used to install a rubber door bumper. For use on many classic cars of the early 1930's such as Duesenberg and others. Material: Steel; Finish: Natural; Length: 1.260; Width:.806; Height:.484; Thickness:.060; Holes:.205,.336 centers. Door Window Flapper Hinge Special hinge with 5/8'' knuckles to cover the window opening when the window is rolled down. Sold in a six foot length - trim to fit application. Material: Steel; Length: 6ft; Thickness:.038; Knuckle:.625; Pin DIA:.093; Open width: $ $ $ /20/17. Prices subject to change. Page 5/18

6 CAD-0123 CAD-0126 CAD-0127 CAD-0128 Cadillac 5/16-18 x 1/2 Hex Nut Fender bolt hex nut for V8 V12 V16 Cadillac and LaSalle. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Nut Qty 18 Application 341; Group Nut On Brace Screw Qty 4 Application 345C 355C 370C 452C ; Group Nut Qty 16 Application A AD 370AD 452AD ; Group Nut Fender Step Screw Qty 3 Application ; Group Nut On Moulding Screw Qty 12 Application 345BC 355BC 370BC 452BC; Group Nut Qty 6 Application D 370D 452D ; Group Nut Qty 11 Application 355D 370D 452D 36-90; Group Nut Qty 4 Application Material: Steel; Finish: Black Oxide; Thread: 5/16-18; Hex:.500; Length:.460. Cadillac 5/16-18 x 1 1/8 Sheet Metal Hex Bolt Hex bolt for attaching fenders and other body panels on V8 V12 and V16 Cadillac and LaSalle. Used from 1927 through Finished in black oxide to prevent rust. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Attaching Corner Shield Screw Qty 14 Application 341 (Note: To body and rear fender); Group Attaching Front Fender Screw Qty 12 Application (Note: Front fender to running board - 15 used on 350); Group Attaching Front Fender Screw Qty 2 Application (Note: To body); Group Brace To Front Fender And Side Bar Screw Qty 4 Application 345C 355C 370C 452C; Group Attaching Rear Fender Screw Qty 54 Application (Note: To body running board and gasoline tank cover); Group Attaching Valance Screw Qty 9 Application D 370D 452D 36-90; Group Attaching Mud Pan Shelves Screw Qty 1 Application 353; Group Attaching Running Board Screw; Qty 30 Application 350 (Note: To fenders); Group Extension To Running Board Screw Qty 4 Application Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.375; Length under head: 1.125; Thread length:.875; Hex:.500; Head:.250. Cadillac 5/16-18 x 3/4 Sheet Metal Hex Bolt Hex bolt for attaching fenders and other body panels on Cadillac V8 V12 V16 and LaSalle. Used from Finished in black oxide to prevent rust. Cadillac part number alternative group number Listed in Cadillac parts book as: Group Screw Attaching Dust Shield Qty 26 Application D 370D 452D (Note: To fender and running board); Group Attaching Front Fender Screw Qty 4 Application 355D 370D 452D (Note: To support); Group Screw For Step Qty 3 Application ABC 370ABC 452ABC; Group Screw For Filler Plate And Bracket Qty 4 Application D 370D 452D 36-90; Group Screw For Attaching Mud Pan Shelves Qty 11 Application 355D 370D 452D Material: Steel; Thread: 5/16-18; Finish: Black oxide; OAL: 1.00; Length under head:.750; Thread length:.656; Hex:.500; Head:.250. Cadillac 5/16-24 x 7/8 Sheet Metal Hex Bolt Hex bolt for attaching front fenders and corner shields on Cadillac V8. Finished in black oxide to prevent rust. Cadillac part number Alternative group number Listed in Cadillac parts book as: Group Screw Attaching Corner Shield Qty 4 Application 341 (Note: To frame); Group Screw Attaching Front Fender Qty 12 Application 314 (Note: To frame and box shields). Material: Steel; Thread: 5/16-24; Finish: Black oxide; OAL: 1.125; Length under head:.875; Thread length:.781; Hex:.500; Head:.250. $ 3.00 $ 3.00 $ 3.00 $ 3.00 Page 6/18 11/20/17. Prices subject to change.

7 P-0033 STZ-0014 STZ-0015 Gas Cap, Door Hood LIN-0011 LIN-0012 LIN-0012-B LIN-0012-C LIN-0013 LIN-0014 MISC-0402 MISC-0403 MISC-0418 AUB-0001 T-Nut for Attaching Body Sheet Metal Steel t-nut with 5/16-24 thread. Has 2 3/16 holes for attaching to body sheet metal. Used on Packard and other cars to hold rear fenders to the body. Stutz Tail Light Stanchion Fender Plate Steel support plate for the tail light stanchion on Stutz M SV-16 and DV-32. Attaches under the fender. Available in left and right side placement. Material: Steel; Finish: Natural; Length: 3.78;5 Width: 2.445; Thickness:.04;0 ID of bend:.500; Holes: Lincoln V-12 Gas Cap Assembly Complete new gas cap assembly for Lincoln V-12. This assembly has a chrome plated aluminum cap with a brass lock plate. Precision CNC machined and ready for installation. Gas & Radiator Cap Retaining Cup, 3 Ears Gas and radiator cap retaining cup with three ears. One ear is wider than the others. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0013, LIN Material: Brass; Finish: Natura;l DIA: 1.812; Square hole:.417; Height:.390; Thickness:.062. Gas & Radiator Cap Retaining Cup 2 Ears Gas and radiator cap retaining cup with two ears. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0013, LIN Material: Brass; Finish: Natura;l DIA: 1.900; Square hole: 7/16; Height:.444; Thickness:.062. Gas & Radiator Cap Retaining Cup 3 Ears Round Hole Gas and radiator cap retaining cup with three ears. One ear is wider than the others. This style has a round center hole instead of a square hole. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. Material: Brass; Finish: Natural; OD: 1.800; Height:.375; ID:.383; Thickness:.060; Ears:.406 x.125. Gas & Radiator Cap Backup Washer Gas and radiator cap backup washer with cupped shape. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0012 or LIN-0012-B, LIN Material: Brass; Finish: Natural; OD: 2.500; ID:.767; Height:.150; Thickness:.030. Gas & Radiator Cap Sealing Washer Gas and radiator cap sealing washer made from 1/32 gasket paper. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0012 or LIN-0012-B, LIN Material: Gasket paper; OD: 2.500; ID:.791; Thickness:.025. Jaguar Mark X Gas Filler Door Mount Bracket Gas filler door mounting bracket for use on Jaguar Mark X. Left and right side available. Material: Steel; OAL: 3.994; Width: 1.750; Thickness:.042. Jaguar Mark IX Gas Filler Cap Washer Jaguar Mark IX gas filler cap washer. Material: Steel; Finish: Natural; OD: 2.425; ID:.325. Auburn Hood Hinge Hood hinge for Auburn 851/852 hood sides. Specially made for use on Auburn, but may also fit other makes of automobiles. Material: Steel; Pin: 3/16; Knuckle: 2.00; Open width: 1 1/4; Thickness:.060; Length: 60''. $ $ $ $ $ 3.25 $ $ $ /20/17. Prices subject to change. Page 7/18

8 CAD-0074 CAD-0075 CAD-0082 CAD-0092 MISC-0197 MISC-0208 MISC-0246 MISC-0271 P-0088 P-0089 P-0097 P-0098 Cadillac 6-32 Hood Hinge Nut 6-32 Nut for all Cadillac V-8 V-12 and V-16 and LaSalle hood hinges. Cadillac group number , part number Listed in Cadillac parts book as ''Top panel hinge screw nut''. Material: SS; Finish: Natural; Thread: Cadillac Hood Bumper Nut Heavy nut for the top hood bumper on V-8 Cadillac and LaSalle. Cadillac group number , part number Listed in Cadillac parts book as ''Button to top panel nut''. Material: SS; Finish: Natural; Thread: 10-24; Hex: 3/8; Height:.197. Hood Door Spring Cadillac & LaSalle Hood door spring for Cadillac and LaSalle. For use on the following: Cadillac: 355A V8, 370A V12, 452A V-16; LaSalle 345A V8. Cadillac group number , part number One spring required for each hood door - total of 10 required per car. OAL: 3 1/2; Loop OD: 1/2; Wire size:.092; ''U'' Length & width: 1 1/32 x 13/ Cadillac Hood Rest Bracket Steel hood rest bracket attaching to center hinge on Cadillac V8 V12 and V16. Cadillac part number , group number Two used per car on models 345C 355B BC. Four used on all other models. Material: Steel; Finish: Natural; Length: 2.930; Width: 2.766; Thickness:.056; Holes:.157; ID 2.00 centers. Ghia Coachwork Hood Latch Spring Hood latch spring used with some Ghia bodied cars from the 1950's. This spring was produced for installation with a Ghia Supersonic body on an Aston Martin DB 2/4. Material: Stainless steel; Finish: Natural; Wire:.115; OD: 1.49; Free length: Ghia Coachwork Hood Support Spring Spiral torsion spring used as a hood support spring for cars with Ghia body coachwork. This spring was produced for the hood support on a Ghia Supersonic body on an Aston Martin DB 2/4. Material: Stee;l Finish: Natural; Width:.300; OD: 2 11/16; Thickness:.078; End loop ID: 11/32. Diamond Pleated Hood Pad Material Diamond pleated hood pad material for use on Italian cars such as Maserati, Ferrari, Lamborghini and others. Consists of an insulating pad sewn between two layers of vinyl coated fabric. The diamond in the material shown is point to point. Distance between the stitching is Other sizes and patterns can be custom sewn in sizes up to 5ft x 4ft. This item is sold by the square foot. Largest size available is 5ft x 4ft. Material: Vinyl & insulation; Thickness: 0.125; Diamond: point to point. Aluminum J Molding Aluminum ''J'' molding for use in various automotive and marine applications. Length: 48''; Width: 1.038; Thickness:.038. Packard Hood Rivet, Short Packard hood rivet, short version. OAL:.246; OD: ; Width of head:.049; Width of.200 shank:.067; Width of.125 shank:.125; Hole in.125 shank:.078. Packard Hood Rivet, Long Packard hood rivet, long version. OAL:.300; OD: ; Width of head:.047; Width of.200 shank:.128; Width of.125 shank:.125; Hole in.125 shank:.078. Hood Louver Door Spring Packard Right and left side hood louver door springs for Packard V-12. Packard part numbers: Right: R group ; Left: L group Springs per side required. Material: SS; Finish: Natural; Wire DIA:.072; OD:.395; LOB: 1.585; OAL: 7 1/4. $ 2.25 $ 2.25 $ $ $ $ $ $ $ $ Page 8/18 11/20/17. Prices subject to change.

9 P-0126 STZ-0003 STZ-0006 License Plate Lighting MISC-0178 MISC-0419 CAD-0063 CAD-0064 CAD-0077 CAD-0140 CAD-0223 COR-0034 Hood Door Spring Packard Hood door spring for Packard Series Packard part number ''Bonnet Side Door Hinge Spring''. Six or eight springs required per car depending on model. OAL: 2 1/2 Wire size:.085; Loop OD:.357; ''U'' Length & width: 11/16 x.445. Stutz Hood Vent Door Knob Steel knob for the hood vent door as used on Stutz SV-16 and DV-32. Quantity of 8 used per car. Material: Cold rolled steel; Finish: Natural; Thread: 6-32; Thread length:.290; Head:.620 OD x.505 long; Length under head:.605; Step under head:.182 OD; OAL: Stutz Hood Hinge End Plate Steel hood hinge end plate for Stutz DV-32. Used to hold the hinge pin to cowl and radiator. Material: Steel; Finish: Natural; Length: ; Width:.853; Height:.583; Holes:.312 ID, center; Cut out: x.140; Hood ID:.453. License Plate Frame Prewar Automobiles Chrome plated adjustable license plate frame. Used on automobiles of the late 1930's and early 1940's. OD: 7/16; Minimum width: 8.00; Minimum height: In-Lite Minor Sand Blast Mask In-Lite Minor sand blast mask. Used to blast ''in-lite minor'' into primer on the license plate bracket before painting as shown in photos. For use on Stutz and other prewar cars. Text length: 1.00; Text height & width:.624. Cadillac V-8 & V-16 Tail Light Conduit Hanger Steel strap to support spring type wiring conduit used on V-8 and V-16 Cadillac. May also be applicable to other years and models. Two sizes available. Cadillac group number , part number CAD-0063 Length: 6 1/4; Width at center:.650; Width at end: 1 1/8; Thickness:.035; Hole DIA:.342; Holes center to center: CAD-0064 Length: 6 1/4; Width at center:.650; Width at end: 1 1/8; Thickness:.035; Hole DIA:.342; Holes center to center: Cadillac V-8 Tail Light Conduit Bracket Bracket for securing tail light conduit to the frame. Fits 1929 Cadillac V-8 model 353 may also fit other years and models. Cadillac part number , group number ''Conduit for rear lamp assemblies''. Material: Brass; Finish: Primer; OAL: 2.350; Width: 2.325; Height:.915; ID opening bracket: 5/8; Thickness:.040; Holes: Cadillac Door Light Switch Chrome plated door jamb switch for use on Cadillac. Material: Stee;l Finish: Chrome; Bracket: x 1.125; Bracket holes, centers:.190, 1.375; Button OD:.375; Button height: Cadillac Headlight Cork Gasket Cork gasket for use on 1932 Cadillac headlights. Each light requires 30'' of material - this is sold in a length of 61'' for use on two headlights. Cadillac group number , part number ''Gasket for head lamp lens''. For Series 355BC 370BC 452BC. Material: Cork; Length: 61''; Width:.287; Thickness:.152. Cord Headlight Door Adjusting Screw Headlight door adjusting screw for Cord 810 & 812. Made from steel and cadmium plated for corrosion resistance. Material: 12L14; Finish: Cadmium; Thread: 9/16-18; Thread length: 1.281; Length: 1.875; Hex:.562; Length under head: 1.625; Head height:.250; Bottom OD:.312. $ $ $ $ $ $ $ /20/17. Prices subject to change. Page 9/18

10 COR-0035 COR-0036 DEL-0029 Depress_Beam J J MISC-0108 P-0006 P-0008 P-0009 STW Cord Tail Light Lens Spring Tail light lens spring for use on Cord 810 & 812. Cord Interior Trunk Light Lens Frosted glass inside trunk light lens for Cord 810/812. Fits inside tail lights mounted on trunk lid so running light can illuminate the inside of the trunk. Material: Glass; OD: 2.109; Thickness:.125. Delage D8 120 Headlight Mount Delage D8 120 headlight mount. Lost wax steel casting. Fits Marchal Aerolux headlights. Trim and shape to fit on fender as needed. Depress Beam Headlight Lens Rolls Royce New Depress Beam headlight lens for Rolls Royce Phantom I and other cars. Part number Lens measures 10 49/64 x 9 31/32. Tail Lamp Lens Clip Steel lens retaining clip for tail lamps as used on Duesenberg Model J and others. Pyraline Lens for Tail Lights Dark red tinted plastic material. Duplicate of color used in 1930's tail lamps. Sold in a standard size of 9'' x 4 1/2'' x.030 thick. Maserati Ghibli Side Reflector / Marker Light Maserati Ghibli side marker light produced from solid brass. This side marker is ready to be plated and is a replacement housing for the original plastic unit that cannot be plated.fits some years of Maserati Ghibli may also fit other models. Specially produced for a Ghibli owner who wanted to replace his deteriorated original lights with a quality replacement. Measures 2 13/16 OD. 3/8-24 x 1 1/4 Radiator Shell Mount Bolt for Packard Stainless steel hex bolts used to attach the headlight support brackets to the radiator shell on 1932 Super 8 and Standard 8 Packard. Fits Series cars. Ready for polishing. Packard part number ''Radiator Shell Brace to Retainer Flange Screw''. Three required per car. Material: 303 SS; Thread: 3/8-24 x 1 1/4. 3/8-24 x 3/4 Radiator Shell Mount Bolt for Packard Stainless steel hex bolts used to attach the headlight support brackets to the radiator shell on on 1932 Super 8 and Standard 8 Packard. Fits Series Ready for polishing. Packard part number ''Radiator Shell Brace Retainer to Flange Screw''. Three required per car. Material: 303 SS; Thread: 3/8-24 x 3/4. 3/8-24 x 15/16 Radiator Shell Mount Bolt for Packard Stainless steel hex bolts used to attach the headlight support brackets to the radiator shell on 1932 Super 8 and Standard 8 Packard. Fits Series Ready for polishing. Packard part number ''Radiator Shell Brace Retainer to Flange Screw''. Three required per car. Material: 303 SS; Thread: 3/8-24 x 1/16. Stewart Warner Spotlight Base Brass mounting base connecting to the support arm of a Stewart Warner spotlight. The spotlight mounts to the windshield and is a combination spotlight and rear view mirror. This is a CNC machined duplicate of the original part. For use on Model A Duesenberg and possibly other cars of the era. Base: L x.875 W x.375 H; OAH:.9375; ID:.625; Screw holes:.208, 2.25 centers. $ $ $ $ $ $ $ $ $ $ Page 10/18 11/20/17. Prices subject to change.

11 Mirror STW STW STW STW STZ-0014 STZ-0015 STW Radiator Cap & Shell CAD-0001 CAD-0098 HIS-0173 LIN-0012 Stewart Warner Spotlight Support Arm Bronze support arm for a Stewart Warner windshield mounted combination spotlight / rear view mirror. This arm holds the light / mirror assembly and attaches to the mounting base. Recommended for use with our spotlight base (STW ) to ensure a snug fit. For use on Model A Duesenberg and possibly other cars of the era. Material: Bronze; Width: 4.832; Height: ; ID between the arms: 4.300; Mounting stem hex:.623 x.550; ID on ends:.512. Stewart Warner Spotlight Faceted Nut Brass faceted nut securing the spotlight assembly to the support arm on Stewart Warner windshield mounted spotlight / rear view mirrors. For use on Duesenberg Model A and possibly other cars of the era. Material: Brass; Finish: Natural; Thread: 1/4-24; Thread depth:.393; Hex:.750; Hex height:.240; OAH:.481; Step ID:.531. Stewart Warner Spotlight Lens Glass lens for Stewart Warner windshield mounted combination spotlight / rear view mirror. For use on Model A Duesenberg and possibly other cars of the era. OD: 3.916; Thickness:.092. Stewart Warner Spotlight Tag Identification tag for a windshield mounted combination spotlight and rear view mirror made by Stewart Warner. For use on Duesenberg Model A and others. Length: 1.500; Width:.500; Thickness:.028; Holes:.076; ID centers. Stutz Tail Light Stanchion Fender Plate Steel support plate for the tail light stanchion on Stutz M SV-16 and DV-32. Attaches under the fender. Available in left and right side placement. Material: Steel; Finish: Natural; Length: 3.78;5 Width: 2.445; Thickness:.04;0 ID of bend:.500; Holes:.343. Stewart Warner Spotlight Mirror Glass mirror for use on Stewart Warner windshield mounted combination spotlight and rear view mirror. For use on Model A Duesenberg and possibly other cars of the era. Material: Silvered glass; OD: 2.616; Thickness: Cadillac Brass Shutter Rivet Semi tubular brass shutter rivet for use with V-8 V-12 and V-16 Cadillac. Duplicate of original stepped rivet to attach radiator shutters to linkage. Cadillac group number , part number Small DIA:.125 shank; Large DIA:.179 shank; Head: 5/16. Cadillac & LaSalle Radiator Filler Cap Washer Brass radiator cap filler washer with cupped shape. For use on Cadillac V8 V12 V16 and 1932 LaSalle. May also be compatible with other vehicle makes. Cadillac part number 89157, group Material: Brass; Finish: Natural; OD: 2.750; ID:.750; Thickness:.030. Hispano Suiza J12 Radiator Shutter Rivet Radiator shutter rivet as used on Hispano Suiza J-12. Material: Brass, semi-tubular; Finish: Natural; OAL: 8.45mm; 1st Step OD: 4.15mm; 2nd Step OD: 3.65mm; Head OD: 7.5mm; Head thickness: 1.25mm; ID: 2mm. Gas & Radiator Cap Retaining Cup 3 Ears Gas and radiator cap retaining cup with three ears. One ear is wider than the others. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0013, LIN Material: Brass; Finish: Natura;l DIA: 1.812; Square hole:.417; Height:.390; Thickness:.062. $ $ $ $ $ $ 4.00 $ /20/17. Prices subject to change. Page 11/18

12 LIN-0012-B LIN-0012-C LIN-0013 LIN-0014 MISC-0328 P-0006 P-0008 P-0009 P-0034 P-0167 Gas & Radiator Cap Retaining Cup 2 Ears Gas and radiator cap retaining cup with two ears. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0013, LIN Material: Brass; Finish: Natura;l DIA: 1.900; Square hole: 7/16; Height:.444; Thickness:.062. Gas & Radiator Cap Retaining Cup 3 Ears Round Hole Gas and radiator cap retaining cup with three ears. One ear is wider than the others. This style has a round center hole instead of a square hole. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. Material: Brass; Finish: Natural; OD: 1.800; Height:.375; ID:.383; Thickness:.060; Ears:.406 x.125. Gas & Radiator Cap Backup Washer Gas and radiator cap backup washer with cupped shape. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0012 or LIN-0012-B, LIN Material: Brass; Finish: Natural; OD: 2.500; ID:.767; Height:.150; Thickness:.030. Gas & Radiator Cap Sealing Washer Gas and radiator cap sealing washer made from 1/32 gasket paper. For use with Lincoln V and 1938 Packard. May also fit other makes and years of vehicles. For use with our part numbers: LIN-0011, LIN-0012 or LIN-0012-B, LIN Material: Gasket paper; OD: 2.500; ID:.791; Thickness:.025. Brass Flat Head Rivet.350 x.380 Special brass stepped flat head radiator shutter rivet. Compare size to your rivets for suitability. Material: Brass; OAL:.380; Head OD:.350 x.082 L; Mid OD:.197 x.068 L; Bottom OD:.142 x.200 L. 3/8-24 x 1 1/4 Radiator Shell Mount Bolt for Packard Stainless steel hex bolts used to attach the headlight support brackets to the radiator shell on 1932 Super 8 and Standard 8 Packard. Fits Series cars. Ready for polishing. Packard part number ''Radiator Shell Brace to Retainer Flange Screw''. Three required per car. Material: 303 SS; Thread: 3/8-24 x 1 1/4. 3/8-24 x 3/4 Radiator Shell Mount Bolt for Packard Stainless steel hex bolts used to attach the headlight support brackets to the radiator shell on on 1932 Super 8 and Standard 8 Packard. Fits Series Ready for polishing. Packard part number ''Radiator Shell Brace Retainer to Flange Screw''. Three required per car. Material: 303 SS; Thread: 3/8-24 x 3/4. 3/8-24 x 15/16 Radiator Shell Mount Bolt for Packard Stainless steel hex bolts used to attach the headlight support brackets to the radiator shell on 1932 Super 8 and Standard 8 Packard. Fits Series Ready for polishing. Packard part number ''Radiator Shell Brace Retainer to Flange Screw''. Three required per car. Material: 303 SS; Thread: 3/8-24 x 1/16 Packard Radiator Shutter Rivet Stepped brass rivet used on thermostatically controlled radiator shutters. For use with all Packard Series from the 1920's through the 1940's using shutterstats. Also for use on other makes of the era. Material: Brass; Head:.320; Medium DIA:.207 x.142 high; Small DIA:.160 x.120 high; OAL:.312; ID: Packard Radiator Cap Retaining Washer Three eared brass radiator cap lock plate used on Packards from Packard part number Material: Brass; Finish: Natural; OD: 1.770; Height:.359; ID:.375; Wall:.067; Tab:.424 x.125. $ $ 3.25 $ 3.25 $ $ $ $ 3.75 $ Page 12/18 11/20/17. Prices subject to change.

13 TAG-0037 Running Board J-7328 MAR-0020 MAR-0021 MISC-0370 Sill Plates AUB-0005 MAS-0002 MB-0010 P-0072 P-0073 Maserati Radiator Cap Tag Red and silver radiator cap tag for Maserati 3500 and other early 6 cylinder models. Material: Aluminum; Finish: Natural; OD: 2.105; Thickness:.018; Hole ID:.100; Hole centers: 2.250; Width: Duesenberg Brass Running Board Channel Brass J-shape channel used to finish the inside edge of Duesenberg running boards. Can also be used as binding molding for a variety of vintage cars and boats. Measures 72'' long x high x.032 thick. Marmon V16 Running Board Molding Produced and sold on a per piece basis. Material: Brass; Length: 61.5''; Width:.812. Marmon V16 Running Board Edge Molding Set Marmon V-16 running board edge molding set. Set of 8 brass moldings. 5/16-18 Black Oxide Bolt American Underslung running board bolt. Duplicate of an original part from a 1910 Traveller. Material: Steel; Finish: Black oxide; Thread: 5/16-18; Thread length:.803; OAL: 1.324; Hex: 1/2''; Dome:.052; Head height:.312; Length under head:.189. Auburn Boattail Speedster Sill Plate Aluminum sill plate for use on Auburn Boattail Speedster. Sill plate has an etched-in design and is an exact duplicate of an original sill plate. Material:Aluminum; Finish: Natural; Length: 32.00; Width: 3.062; Thickness:.052; Inner bend DIA:.557; Width before bend: 2.00; Width after bend:.312. Maserati Ghibli Sill Plate Universal aluminum sill plate for Maserati Ghibli. Fits left and right side of the car, but will need to be polished and trimmed to fit before installation. Maserati part number 115B Material: Aluminum; Finish: Natural; Width: 1.727; Length: 36.00; Thickness:.050. Murphy Body Co. Door Sill Plates Door sill plate to fit all Murphy bodied cars of the 1920's and 1930's. These sill plates are an exact duplicate of the original shape, are made from.040 thick brass and measure 39'' x 2 1/2''. The Murphy logo is stamped into the brass in the center of the plate. These sill plates are produced to be trimmed to fit and drilled by the purchaser. They will also need to be polished and plated by the purchaser. These plates will fit all Murphy bodied cars Packard V-12 Front Sill Plates New photo engraved sill plates to fit many Series and models of Packard V-12. These perfect reproduction sill plates have been photo-etched into.032 brass and are exact duplicates of the original Packard parts. The plates are ready to be drilled and plated. Left and right side available. Sill plates are x and will fit 1935 V-12 Convertible Sedan. Original Packard part numbers: (right) and (left) Packard V-12 Rear Sill Plates New photo engraved rear sill plates to fit many Series and models of Packard V-12. These perfect reproduction sill plates have been photo-etched into.032 brass and are exact duplicates of the original Packard parts. The plates are ready to be drilled and plated. Right and left side available. Sill plates are x Original Packard part numbers: (right) and (left). $ $ $ $ $ 5.25 $ $ $ $ $ /20/17. Prices subject to change. Page 13/18

14 Top STZ-0016 STZ-0017 STZ-0041 Stutz Door Sill Plate Long Brass engraved door sill plate for use on 1931 Stutz Model M. This is the longer of the two sill plates we stock. Material: Brass; Length: 36.0; Width: 2.516; Thickness:.042; Height:.553; ID Bend:.218. Stutz Door Sill Plate Short Brass engraved door sill plate for use on 1931 Stutz Model M. This is the shorter of the two sill plates we stock. Material: Brass; Length: 18.00; Width: 2.482; Thickness:.042; Height:.617; ID Bend: Stutz Model M Door Sill Plate Brass blank for fabricating Stutz Model M door sill plate. Highly polished brass stock with "STUTZ" engraved in proper location. Please note: any appearance of scratches to the finish in photo is due to protective plastic covering to be removed after purchase - sill plate is not scratched. This sill plate must be custom fit to the car: trimming, forming and chrome plating is required for use. Material: HIghly polished brass; OAL: ; Width: 3.00; Thickness: $ $ $ COR-0037-B Cord Top Rivet Short Cord 810/812 top rivet with step. Material: Stainless steel; Finish: Natural; OAL:.890; OD: ; Length under head:.783. $ Trunk MB-0024 MB-0025 MB-0032 MB-0033 MB-0034 CAD-0005 COR-0002 Murphy Body Rear Top Bow Retaining Stud Rear top bow retaining stud for use on Murphy bodied cars. May also be compatible with other body makes. Material: 12L14 Steel; Finish: Natural; Thread: 5/16-18 x.557; OAL: 1.190; Width of flats:.500; OD:.626; Head OD:.375; Domed head thickness:.135. Murphy Body Disappearing Top Roadster Lid Handle Murphy disappearing top roadster lid handle. Material: Bronze with steel insert; Finish: Natural; Thread: 5/16-18 x.100; Handle length: 5.00; Length of post: 3 1/4; Square shaft: 5/16. Murphy Body Rear Window to Frame Thumb Screw Rear window to frame knurled thumb screw for use on Murphy bodied cars. Material: Steel; Finish: Natural; Thread: 1/4-18 x.627; Kruled DIA:.900; Slot width:.069; Head height:.800; Knurled height;.355; Head length:.390. Murphy Body Windshield to Front Top Bow Mounting Pin Windshield to front top bow mounting pin for use on Murphy bodied cars. Material: Steel; Finish: Natural; Thread: 5/16-24 x.660; OAL: 1.250; Head length:.590; Head DIA:.480; Slot width:.072. Murphy Body Convertible Top Corner Thumb Nut Convertible top corner knurled thumb nut for use on Murphy bodied cars. Material: Steel; Finish: Natural; Thread: 1/4-18; OAL:.805; Knurled DIA:.900; Base DIA:.625; Slot width:.067; Slot length:.810. Cadillac V-16 Trunk Rack Cup Washer Cadmium steel cup washer to fit inside the trunk rack where bosses for the moldings come through the rack. For use on Cadillac V-16 models and 85. Cadillac part number, group number OD: 1/2; ID: 3/16; Height: 1/8. Cord Molded Rubber Lid Bumpers New molded rubber lid bumpers with hole in the center for the attaching screw. Used on Cord Convertible Coupe. Sold as a set of four. Measure 15/16 Dia. and 9/16 H. $ $ $ $ $ $ 2.75 $ Page 14/18 11/20/17. Prices subject to change.

15 COR-0024 Cord Lid Stay Flipper Left Trunk lid stay flipper for the left hand side of the trunk on all Cord 810 and 812 models. Cord Interior Trunk Light Lens Frosted glass inside trunk light lens for Cord 810/812. Fits inside tail lights COR-0036 mounted on trunk lid so running light can illuminate the inside of the trunk. Material: Glass; OD: 2.109; Thickness:.125. Murphy Body Disappearing Top Roadster Lid Handle Murphy disappearing top roadster lid handle. Material: Bronze with steel MB-0025 insert; Finish: Natural; Thread: 5/16-18 x.100; Handle length: 5.00; Length of post: 3 1/4; Square shaft: 5/16. Trunk Trim Tee Bolt, Small Trunk trim tee bolt for use on many makes on prewar automobiles. MISC-0407 Material: Bronze; Finish: Natural; Thread: x.300; Length under head:.450; Tip to tip:.970; Thickest part of tee:.315. Packard Eight Trunk Trim Tee Bolt Large Tee bolt for use on Packard Eight trunk rack trim strip. Packard part number for Series and 645. Packard part number MISC for Series and 443. Material: Bronze; Finish: Chrome plated; Thread: 1/4-28 x.465; Length under head:.610; Tip to tip measurement: 1.080; Thickest part of tee: Packard V-12 Trunk Medallion Accessory trunk rack lid medallion for use on 1938 Packard V-12 may also P-0091 fit other years. Manufactured in bronze to exacting original specifications. Packard part number Measures: approx. 5 1/2'' high x 6 3/4'' wide, 1/4'' center hole. Windshield & Windows BODY-0011 BODY-0011-A COR-0033 COR-0039 MAS-0011 MB-0001 Locking Windshield Handle Locking windshield handle for use on many pre-war custom coachwork cars. Material: Bronze; Finish: Natural; OAL: 5 1/4; Mounting pin hole:.120. Locking Windshield Handle Bezel Locking windshield handle bezel for use on many prewar custom coachwork cars. Material: Bronze; Finish: Natura;l Countersunk screw holes:.200; Slot width:.540; Slot length: Cord Windshield Bolt Plate CNC Machined cadmium plated steel windshield bolt plate for use on Cord 810 & 812. This part is used underneath the cowl to align the bolt head to the sheet metal. Cord part number G Material: Steel; Finish: Cadmium; Length: 1.078; Width:.656; Height:.468; ID:.375. Cord Door Glass Frame Stainless Corner Trim Cord 810 and 812 door glass frame stainless corner trim. For use on Phaeton and Convertible Coupe models. Quantity of four used per car. Maserati Securit Glass Etch Mask Securit glass etching mask known to be correct for use on 1971 Maserati Ghibli. May also be appropriate for other European vehicles. Mask is for use with hydrofluoric acid paste to etch the Securit logo on window glass. Made from mylar and has an adhesive on one side. Window Flapper Spring Style 1 Stainless steel spring for closing window flappers. Commonly used on Murphy bodies, this style has clock wise wind & long ends coming off on the same side. Also used by Brunn, Rollston, LeBaron and others. Measures with a.218 OD wire. Wire thickness is.040. Ends can be trimmed and bent if needed. $ $ $ $ $ $ $ $ $ 9.00 $ /20/17. Prices subject to change. Page 15/18

16 MB-0002 MB-0004 MB-0005 MB-0033 MB-0036 MISC-0057 MISC-0060 MISC MISC-0065 MISC-0100 MISC-0101 MISC-0334 Window Flapper Spring Style 2 Stainless steel spring for closing window flappers. Commonly used on Murphy bodies this style has counter clockwise wind with long ends coming off on opposite sides. Also used by Brunn, Rollston, LeBaron and others. Measures OAL with a.218 OD wire. Wire thickness is.040. Ends can be trimmed and bent if needed. Window Flapper Spring Style 3 Stainless steel spring for closing window flappers. Commonly used on Murphy bodies, this style has clockwise wind with long ends coming off on opposite sides. Also used by Brunn, Rollston, LeBaron and others. Measures.935 OAL with a.169 OD wire. Wire thickness is.034. Ends can be trimmed and bent if needed. Window Flapper Spring Style 4 Stainless steel spring for closing window flappers. Commonly used on Murphy bodies, also used by Brunn, Rollston, LeBaron and others. Measures.584 OAL with a.224 OD wire. Wire thickness is.040. Ends can be trimmed and bent if needed. Murphy Body Windshield to Front Top Bow Mounting Pin Windshield to front top bow mounting pin for use on Murphy bodied cars. Material: Steel; Finish: Natural; Thread: 5/16-24 x.660; OAL: 1.250; Head length:.590; Head DIA:.480; Slot width:.072. Murphy Body Lower Window Channel Lower window channel for use on Murphy bodied cars. Material: Carbon steel; Finish: Natural; Length: ; Channel width:.330; Height: 1.000; Thickness:.056. HI-Test LOF Safety Plate Etch Mask HI-Test LOF Safety Plate glass etching mask for use with hydrofluoric acid paste to etch the HI-Test logo on window glass. Made from mylar and has an adhesive on one side. For use on 1940 Cadillac and others. Saint Christophe Securite Glass Etch Mask Saint Christophe Securite glass etching mask for use with hydrofluoric acid paste to etch the Saint Christophe logo on window glass. Made from mylar and has an adhesive on one side. Geneve Securit Etching Mask Small Geneve Securit glass etch mask. Approximate DIA:.768. Duplate Safety Plate Glass Etch Mask Duplate Safety Plate glass etching mask for use with hydrofluoric acid paste to etch the Duplate logo on window glass. Made from mylar and has an adhesive on one side. Seristal Securite Glass Etch Mask Seristal glass etching mask for use with hydrofluoric acid paste to etch the logo on window glass. Made from mylar and has an adhesive on one side. Glace Securit Glass Etching Mask Glace Securit glass etching mask for use with hydrofluoric acid paste to etch the Securit logo on window glass. Made from mylar and has an adhesive on one side. Vacuum Wiper Tubing Clip Brass clip used to secure 3/16 vacuum wiper tubing to windshield posts and frames. Material: Brass; Length:.562; Width:.375; Thickness:.015; ID hole:.187; ID for tube:.210. $ 8.75 $ 8.75 $ 8.75 $ $ $ $ $ $ $ $ $ Page 16/18 11/20/17. Prices subject to change.

17 MISC-0379 MISC-0405 P-0143 P-0200 P /4-27 Brass Domed Head Slotted Machine Screw Brass domed head slotted machine screw used with American Underslung windshields. Specifically used with Cox Clear Vision Duplex windshields manufactured by Cox Brass Manufacturing Company. Reproduced from an original part on a 1910 Traveller. Material: Brass; Finish: Natural; Thread: 1/4-27; Thread length:.500; OAL: 1.500; Length under head:.850; Head OD:.346; Slot width:.050; Slot depth:.100. Securite Glass Etch Mask Securite glass etching mask for use with hydrofluoric acid paste to etch the Securite logo on window glass. Made from mylar and has an adhesive on one side. Text length:.750; Text height: Packard Windshield Locking Mechanism Link Linkage for the windshield locking mechanism on 1932 and 1933 Packard. Used in adjusting the angle of the windshield and securing it in place. For use on: 1932 Standard ; 1932 Deluxe ; ; 1933 Standard ; 1933 Super Packard part numbers and Material: Spring steel; Finish: Natural; Length: 6.975; Width:.675; Thickness:.042; Hole ID: Packard Vent Window Regulator Gear Window vent regulator gear for use on Packard Eight Super 8 and Twelve. Right and left side available. Difference between left and right is in the orientation of the teeth. Material: Phosphor bronze; OD: 1.375; ID:.500; Thickness:.468. $ $ $ /20/17. Prices subject to change. Page 17/18