STRADA. Better for you, better for the environment

Size: px

Start display at page:

Download "STRADA. Better for you, better for the environment"

Preston Quinn
5 years ago
Views:

1 STRADA Better for you, better for the environment

2 Strada Dimensions Product code: STRW d B h H h 90 L Twin L 6 Type B d h (min) Dimensions in mm Connections Jaga Comap valve to the wall Jaga Comap valve to the floor Comap valve no longer available (May2016) The valves offered by Jaga are totally conceainfo: led within the standard casing. Detailed see Connection sets and valves. d 2. d Jaga Pro valve to the wall Jaga Pro valve to the floor d d Jaga valve to the wall Jaga valve to the floor A d d Jaga type 6 valve to the wall The Jaga Type 6 valve: with short connection distance, special for Strada type 06 connection to the wall. See p Type d A

3 Options Top valve Please contact our office for more information and for prices of the high level valve kits available Brush Offers easy cleaning of the underside of the Low-H2O heat exchanger without the need to detach the casing Order code: Fixing calorimeter holder 60 Towel rail in -plated aluminium Length DBE version 60 / 660 Electronic calorimeter possible with standard casing Description Inside Inside Outside Dynamic Boost Effect technology offers even greater power and efficiency. Oxygen version For healthy heat and clean air.

4 Outputs Outputs in watts at C & C, in accordance with EN2 Wall-Mounted Model Twin Type 6 code height length type colour ORDER CODE: STRW (Example order code shown is for a 200mm high radiator, 00mm long, type 6) H L Supplied as Standard Colour 133 or 001 Twin Low-H20 type 07 or 08 element Wall brackets Complete casing Fixing kit Extended air vent 1/8 Drain plug 1/2 Wall-Mounted Model Type 10 code height length type colour ORDER CODE: STRW (Example order code shown is for a 200mm high radiator, 00mm long, type 10) H L Supplied as Standard Colour 133 or 001 Low-H20 heat exchanger type 10 Wall brackets Complete casing Fixing kit Extended air vent 1/8 Drain plug 1/2 Wall-Mounted Model Twin Type 11 code height length type colour ORDER CODE: STRW (Example order code shown is for a 30mm high radiator, 00mm long, type 11) H L Supplied as Standard Colour 133 or 001 Low-H20 heat exchanger twin type 11 Wall brackets All dimensions are shown in millimetres Complete casing Fixing kit Extended air vent 1/8 Output measured in accordance with EN2, at a water temperature of 7/6 C and a room temperature of 20 C (ΔT=0). Drain plug 1/2

5 Outputs Outputs in watts at C & C, in accordance with EN2 Wall-Mounted Model Type 1 code height length type colour ORDER CODE: STRW (Example order code shown is for a 200mm high radiator, 00mm long, type 1) H L Supplied as Standard Colour 133 or 001 Low-H20 heat exchanger type 1 Wall brackets Complete casing Fixing kit Extended air vent 1/8 Drain plug 1/2 Wall-Mounted Model Twin Type 16 code height length type colour ORDER CODE: STRW (Example order code shown is for a 30mm high radiator, 00mm long, type 16) H L Supplied as Standard Colour 133 or 001 Low-H20 heat exchanger twin type 16 Wall brackets Complete casing Fixing kit Extended air vent 1/8 Drain plug 1/2 All dimensions are shown in millimetres Output measured in accordance with EN2, at a water temperature of 7/6 C and a room temperature of 20 C (ΔT=0).

6 Outputs Outputs in watts at C & C, in accordance with EN2 Wall-Mounted Model Type 20 code height length type colour ORDER CODE: STRW (Example order code shown is for a 200mm high radiator, 00mm long, type 20) H L Supplied as Standard Colour 133 or 001 Low-H20 heat exchanger type Wall brackets Complete casing Fixing kit Extended air vent 1/8 Drain plug 1/2 Wall-Mounted Model Twin Type 21 code height length type colour ORDER CODE: STRW (Example order code shown is for a 200mm high radiator, 00mm long, type 21) H L Weight & water content Supplied as Standard Colour 133 or 001 Low-H20 heat exchanger twin type 21 Wall brackets Complete casing Fixing kit Extended air vent 1/8 Drain plug 1/2 Water content in litres Weight in kg Type L/metre All dimensions are shown in millimetres H T Output measured in accordance with EN2, at a water temperature of 7/6 C and a room temperature of 20 C (ΔT=0).

Connection Sets Set 26 Jaga Comap valve Universal valve set for connection to the wall or to the floor Kv max.

Pro valve Connection to the wall - bottom of casing Jaga Comap thermostatic valve Sleeve couplings Eurocone 3/

7 Connection Sets Set 26 Jaga Comap valve Universal valve set for connection to the wall or to the floor Kv max. 0.6 PLEASE NOTE THIS VALVE IS NO LONGER AVAILABLE (SET 26). COLO.CP2.DW... / Thermostatic heads DW COLO.CP2.DC... COLO.CP2.JA... COLO.CP2.JC... The order code of the connection set will be completed with the sleeve coupling code of choice Set 11 Jaga Pro valve Connection to the wall - bottom of casing Jaga Comap thermostatic valve Sleeve couplings Eurocone 3/ Kv max. 0.6 Chrome/ White DC Chrome COLO.PW2.DW.3... / of choice JA COLO.PW2.DC.3... COLO.PW2.JA.3... Jaga Pro valve COLO.PW2.JC.3... Sleeve couplings M2 White 2 curves to the wall JC Set 12 Jaga Pro valve Connection to the floor Kv max. 0.6 Silver COLO.PF2.DW.3... / of choice RM COLO.PF2.DC.3... Jaga Pro valve COLO.PF2.JA.3... COLO.PF2.JC.3... Sleeve couplings M2 Remote Controlled Set 21 Jaga valve DS Connection to the wall - Not for Strada Type 06 Kv max. 0.6 COLO.JW2.DW.2... / Jaga thermostatic valve Sleeve couplings M2 Chrome/ remote sensor COLO.JW2.DC.2... COLO.JW2.JA.2... COLO.JW2.JC.2... Angled lockshield of choice

Set 22 Jaga valve The order code of the connection set will be completed

2... COLO.JF2.JC.2... Connection to the floor Kv max. 0.

M2 Thermostatic heads DW Set 23 Jaga valve Chrome/ White Connection to the

to the floor Kv max. 0.6 JC COLO.JF3.DW.2.

.. / Jaga thermostatic valve Extension pipe of choice Silver COLO.JF3.JA.2.

8 Set 22 Jaga valve The order code of the connection set will be completed with the sleeve coupling code COLO.JF2.DW.2... COLO.JF2.DC.2... COLO.JF2.JA.2... COLO.JF2.JC.2... Connection to the floor Kv max. 0.6 / Jaga thermostatic valve of choice Straight lockshield Sleeve couplings M2 Thermostatic heads DW Set 23 Jaga valve Chrome/ White Connection to the floor Kv max. 0.6 DC COLO.JW3.DW.2... COLO.JW3.DC.2... / Jaga thermostatic valve Extension pipe of choice Chrome COLO.JW3.JA.2... COLO.JW3.JC.2... Sleeve couplings M2 JA H-piece angled Set 2 Jaga valve White Connection to the floor Kv max. 0.6 JC COLO.JF3.DW.2... COLO.JF3.DC.2... / Jaga thermostatic valve Extension pipe of choice Silver COLO.JF3.JA.2... H-piece straight RM COLO.JF3.JC.2... Sleeve couplings M2 Set 2 Jaga Type 6 valve Remote Controlled COLO.SW2.DW.3... Connection to the wall within the casing - for Strada Type 06 Kv max. 0.6 Jaga Type 6 thermostatic valve Sleeve couplings M2 / DS COLO.SW2.DC.3... COLO.SW2.JA.3... of choice Chrome/ remote sensor COLO.SW2.JC.3... Angled lockshield

9 Sleeve Couplings Included in the price of the connection sets Pro Key Tool for easy mounting of the Jaga Pro valve. For Jaga Comap valve - Eurocone 3/ For flexible steel or copper tube Tube Ø /1 11 1/1 11/ / /1 3/ For synthetic or RPE/ALU tube Tube Ø /2 61 1/ / / /2 61/2. M 2 3/ For tube 12/2 only / /2 For Jaga valve - M2 For flexible steel or copper tube For synthetic tube Tube Ø Tube Ø / /1 11 1/1 11/ / /1 1/2 1/2 For tube 1/1 only 1/2 For tube 18/1 only /2 21 1/ / / / /2 1/2 For RPE/ALU tube Steel tube for CH 1/2 Tube Ø 31 1/2 1/2 Tube Ø 01 1/ /2 03 3/ / /2 Short Coupling - for Connection to the wall For flexible steel or copper tube Ø 1mm Tube Ø 12/1 Complete ordering code with sleeve couplings according to the material used and diameter of the tube. The correct type of sleeve coupling is determined by the ordering code of the connection set Example: COLO. PW2.DW. 32. (insert relevant code from above) 1/2" 1/2

10 Correction factors Average correction factors according to EN2 - C Tv Tl Tr > The indicated outputs with ΔT 0 c and ΔT 30 c are the exact outputs. ΔT 0 c outputs are measured in accordance with EN2 and ΔT 30 c outputs are calculated according to EN2. KEY Tv = flow temperature Tr = return temperature Tl = desired air temperature An average correction factor is given in this table for outputs at other ΔT and is applicable for all dimensions. How to choose the right radiator? Rapid estimation of heat losses Calculate the volume of the room (L x W x H) and multiply this by the Watts/m³ figure given in the table below. Choose according to the level of insulation and the desired room temperature. Insulation 20 2 excellent good 6 7 average 8 9 poor Required output in Watts/m³ Example Use the table to determine the relevant correction factor with a water temperature of 80/60 c with a room temperature of 2 C. The correction factor = 0.89 Required output 1000 watts : 1000 divided by 0.89 = 112 watts therefore search in this leaflet s standard output table for a product with an output of at least 112 watts. Alternatively use the Radiator Finder search function on to identify all Jaga heating products with this required output. Output calculated in accordance with EN2, at a water temperature of 7/6 C and a room temperature of 20 C (ΔT=0).

11 Pressure drops To ensure the maximum output from the Strada Type 06 casing the elements have been changed to a Type 07 in a 200mm high casing and to a Type 08 in all other heights Type 07 Type 08 Type 10 Type 11 Type 1 Type 16 Type 20 Type 21

12 Product specification Strada Material Low-H2O heat exchanger is composed of round, seamless circulation tubes made of pure red copper, with pure aluminium fins and two brass collectors for left or right 1/2 same end connection. Extended air 1/8 and drain plug 1/2 are included Pressure test: 20 bar Working pressure: 10 bar Brackets: sendzimir, galvanized steel plate thickness 1mm, dark grey lacquered, with a maximum intermediate distance of 1.0m Front panel: electrolytic, galvanized steel plate of 1.2mm thick Side panels: electrolytic, galvanized steel plate of 1.2mm thick with hole for integrated Jaga valve, inclusive metallized cover plates for the unused hole Wall slat: electrolytic, galvanized steel plate of 1.2mm thick Inversed aluminium top grille coated in the same colour as the casing Strong and functional packaging, can be used as a protection cover during construction works Colour Heat exchanger electrostaticaly lacquered with anthracite grey epoxypolyester RAL 702, gloss degree 70% The casing is lacquered in the colour (RAL 9016) / sandblast grey metallic 001 / other (see colour chart). The coating is a scratch resistant epoxy-polyester powder, sprayed electrostatically and baked at a temperature of 200 C. UV resistant due to ASTM G3 Product information The casing surface temperature remains safe to touch at all times Manufacturer: Jaga Type: Strada Outputs measured in accordance with EN2, at a water temperature of 7/6 C and a room temperature of 20 C (ΔT=0 C) Options Towel rail in -plated aluminium Brush for easy cleaning of the underside of the heat exchanger Calorimeter holder

13 For Strada CODE 1.. Soft touch : fine structured, satin look example : RAL Jaga has 2 environmentally friendly electrostatic powder coating lines with recuperation and without the use of solvents. After a thorough pre-treatment, the radiators are painted and baked at a temperature of about 18 C. This ensures a highly UV and scratch resistant finish..33 Traffic RAL White RAL Pergamon.23Natural.12Bahama.3 warm brown RAL Off- RAL Traffic yellow RAL Orange.11 Flaming Red RAL Ruby red RAL Aegean.37 Yellow green RAL Green.21Calypso.13 English green RAL Azure.0 Ocean blue RAL Sapphire blue RAL Night blue RAL Pink.3 Magenta RAL Violet RAL 008.Purple.28Classic.03 Light grey RAL Dark grey RAL Anthracite grey RAL Black RAL 900 jaga

14 SPECIAL COLOURS SMOOTH METALLICS 006 Aluminium RAL Old gold 09Anodic grey 00 Gunmetal grey 007Anthracite 01 Yellow gold FINE TEXTURE METALLIC 03Silver grey 036Warm grey 0Concrete grey 001Sandblast grey 018Pearl black 037Cream 039Grey brown 038Cappuccino 02Chocolate 017Pearl brown FINE TEXTURE 03Pure 02Aluminium grey 026 Platinum grey 028Granite grey 06 Graphite black 00Copper 01Cinnamon 03 Khaki 0Navy blue This colour chart is only indicative. It s impossible to obtain a 100% exact colour reproduction in printing. Metal slides with the different colours can be obtained on request. jaga

15 Jaga Guarantee Information 1 The guarantee is valid only if the equipment is properly and correctly used, by its first owner and if installed in accordance with the norms and instructions as detailed in the instruction leaflet and current industry standard practices. 2 The guarantee only applies to the equipment and the spare parts supplied by Jaga. Jaga has the choice between repair and replacement of the equipment or the spare parts. If any modifications have been made by Jaga to the standard product design, Jaga reserves the right to replace the guaranteed equipment with equivalent products or spare parts. 3 The period of guarantee is mentioned in this certificate. The guarantee decreases every year on a straight line basis by an equal percentage in order to reach a zero guarantee at the end of the guarantee period (e.g. for a period of 10 years the annual decrease of the guarantees 10% of the invoiced value). Repaired or replaced product is guaranteed through to the end of the original guarantee period. The guarantee is valid only on products displaying the appropriate identification information concerning product type and series. No guarantee is granted on equipment or spare parts lacking this information, on equipment where this information has been removed or altered, or on equipment that has been repaired or modified by persons not authorised by Jaga to carry out this work. The customer is responsible for any damage caused as a result of errors in installation or use of incorrect fittings, or for any damage caused by electrical connections, faulty or damaged electrical installations or appliances, erroneous voltage or hydraulic pressure and all other errors not directly related to the product delivered by Jaga. The guarantee is also revoked when unsuitable parts or components are used. The guarantee for our heat exchangers is not valid if they are regularly drained, or if they are heated by means of industrial water, steam or water saturated by excessive quantities of oxygen. The quality of the system ater has to be in accordance with the VDI directives. The guarantee is also not applicable if the heat exchangers are placed in unsuitable atmospheric surroundings, such as but not exclusively ammonia, caustic substances etc. 6 This guarantee excludes damage due to incorrect handling and/or use of the equipment, or due to formation of lime deposits, incorrect use of the safety valve, or to all equipment that is incorporated into the building in a way that means it cannot be accessed normally. 7 Any work undertaken or product supplied as a result of a guarantee claim that proves not to be valid will be charged for. Product supplied will be invoiced at the customer s standard purchasing terms, and labour will be charged at 0 per hour with a minimum labour charge of The guarantee period starts from the date of the invoice for supply of the products covered by the guarantee. If the invoice is not available, the date of production will be used based on the product ID number/series. 9 Only the courts of judicial district Hasselt (Belgium) are authorised to deal with disputes arising from this guarantee. It will apply Belgian law even when sales involved are subjects of EU member states as well as non-eu member countries. Heat exchanger Casings and components Valves for Low-H2O heat exchangers

aplano plus Distinctively elegant vertical radiators

aplano plus Distinctively elegant vertical radiators Aplano Plus Dimensions Product code: APP C 121 90 air vent G 1/8 2.5 25 45 70 95 H 300 410 520 630 740 8 C 160 270 380 490 600 710 100 70 6 88 min.