November 2014 TABLES BENCHES OTTOMANS STOOLS

Transcription

1 November 2014 TABLES BENCHES OTTOMANS STOOLS

2 TABLE of Contents TERMS & Conditions GENERAL Information TABLES Benches & Ottomans Pricing l Terms l Ordering 3 Cancellations l Returns 3 Claims l Warranty 3 Shipping & Packaging 4 Guaranteed Freight Pricing Program 4 Care & Maintenance 5 Specifications 6 Stone & Edge Detail Options 7 Stone,, Paint & Wood Selections 7 Cushion Options 8 Environmental Awareness 9 Abacus* Arris 12 Ashland Asti* Athena* Avant Collection Alexander 19 Antoine 19 Joan 19 Axis 20 Ballast Basel* 21 Berkeley* Berlin* Bridge* Canton* Chicago* Classico Collection* Genova 35 Lucca 36 Verona 37 Como 38 Converge* Decca* Dessau Elan* Enfield* Farnsworth* Hampshire* Heinle* Köln Larkspur 65 Moderne 65 Mesa* Neckar 68 Politan Prairie* Salisbury Salon* Saturn Saxony* Sparta Spoke* Stuttgart* Stuttgart 2* Sybil* Tic Tac Toe, Tic Too 94 Tri Collection Drei 95 Trois 95 Tsanga 96 Weimar 97 Uöö* Wöö* Zephyr Zuffen 105 * Includes bench, ottoman or stool option 2

3 TERMS and Conditions Contact Pricing / Custom Quotes Guaranteed Freight Pricing Program Terms Ordering EKITTA Office EKITTA P.O. Box Merion Circle Austin, Texas Austin, Texas Phone: Fax: info@ekitta.com s shown are suggested list prices, F.O.B. factory, Austin, Texas. Pricing does not include delivery, freight, crating or uncrating, installation, storage, insurance, federal, state, or local taxes. Packing charges shown are net. Pricing on Custom quotes is valid for 30 days. s, specifications and materials are subject to change without notice. An optional Guaranteed Freight Pricing Program offers the opportunity to provide a fixed freight cost at the time of order placement. Freight cost estimates are also available upon request from info@ekitta. com EKITTA's Guaranteed Freight Pricing Program is not applicable to planters and hardware. Orders will be scheduled for production after a purchase order and payment is received. Orders <$2,500 require full payment, 50% deposit for orders >$2,500 with the balance and shipping charges to be paid before shipment. To expedite order entry and to assure proper service, or mail orders to the above address or fax to All orders ed or faxed and then mailed, must be marked "Confirmation." EKITTA will not be responsible for duplicate orders if purchase orders are left unmarked. All orders must be accompanied by a written purchase order and payment. Orders will be acknowledged promptly upon receipt. The issuance of an Invoice / Acknowledgment indicates acceptance of any purchase order and is final and binding. To expedite processing, we suggest that a copy of the check be ed or faxed to EKITTA before mailing. Change Orders / Cancellations Returns Damaged Merchandise / Claims Acknowledged orders may be changed only by mutual agreement. Revisions and cancellations are subject to price and schedule adjustments and / or cancellation charges, as appropriate. Items may be returned only with EKITTA s written consent and shipping instructions, and with all related transportation costs to be paid by the purchaser. All returned merchandise is subject to a minimum 35% restocking charge. Customer-damaged items and custom-made items cannot be returned under any circumstance. For your protection, we suggest that all merchandise be inspected upon arrival. If merchandise is received visibly damaged, accept delivery, note damage on freight bill and file claim immediately with the carrier. All claims as to breakage, damage or shortage must be made and adjusted with the carrier by the purchaser. Regardless of final adjustment or adjudication of claim, EKITTA s invoices are due in full subject to usual terms. Concealed damage (that doesn t become apparent until merchandise is unpacked) should be reported to the carrier in writing immediately, requesting an inspection. Be sure to keep a copy of such report and request for inspection to support your claim should the carrier fail to comply with your request. In the event of shortage, do not accept the shipment until such shortage is noted on the bill of lading, and notify EKITTA immediately. Product Design Warranty EKITTA reserves the right to make changes in design and construction or to discontinue products without notice. All dimensions are approximate. EKITTA warrants its products to be free of defects in materials and workmanship for one year from date of delivery. This warranty assumes normal and correct product usage. EKITTA accepts no liability resulting from abnormal use, misuse, abuse, alteration by customer, or damage in transit. It is understood that these limitations are part of the terms and conditions of purchase of EKITTA products and by placing an order, the purchaser accepts these limitations. Option of repair or replacement under this warranty is at the discretion of EKITTA. 3

4 GENERAL Information Shipping and Packaging All merchandise is packed to carrier standards and inspected before shipment. All shipping dates are approximate; a specific arrival date cannot be guaranteed. All orders are shipped upon completion and payment of any balance due. Optional Guaranteed Freight Pricing Program EKITTA will determine carrier if none is specified; specified carriers require approval of EKITTA. EKITTA will not drop-ship to end consumer without prior approval. Freight company accessorial charges, such as call before delivery, residential delivery or inside delivery, if required or necessary, will be added to the dock-to-dock prepaid freight charge. Title of the product changes when the merchandise leaves EKITTA s dock. Any subsequent damage claim is the responsibility of the purchaser. This program offers the opportunity to provide a fixed freight cost for dock-to-dock single shipments of furniture and accessories at the time of order placement. Planters and hardware require a freight quote. Determine the zone to which the products are to be shipped. Calculate the fixed freight cost as a percentage of the total COM/COL List of the order, including charges for any additional product options specified. Indicate on the purchase order "Guaranteed Freight Pricing Program". EKITTA will select the carrier. EKITTA's invoice acknowledgment will include the pre-calculated fixed freight rate. Zone 1-4% COM LIST Oklahoma Texas Zone 2-5% COM LIST Alabama Arkansas Georgia Louisiana Mississippi North Carolina South Carolina Tennessee Zone 3-6% COM LIST Arizona Illinois Indiana Iowa Kansas Kentucky Missouri Nebraska New Mexico Ohio Zone 4-7% COM LIST California Colorado Delaware D.C. Florida Maryland Michigan Minnesota Nevada New Jersey North Dakota Pennsylvania South Dakota Utah Virginia West Virginia Wisconsin Wyoming Zone 5-8% COM LIST Connecticut Idaho Massachusetts Maine Montana New Hampshire New York Oregon Rhode Island Vermont Washington TERMS: A minimum charge of $125 Net per shipment will apply for all furniture orders. All merchandise will be shipped cartoned. Charges will be for 'NORMAL DELIVERY TO THE DOCK" ONLY. A "CALL BEFORE DELIVERY" request requires an additional $35 Net charge. Product is shipped FOB Hutto, Texas, freight prepaid. Title of goods changes when merchandise leaves EKITTA's dock. Any subsequent damage and all freight claims are the responsibility of the purchaser. Zones ZONE 5 4 ZONE 4 ZONE 3 ZONE 4 ZONE 3 ZONE 1 ZONE 4 ZONE 2 ZONE 5 ZONE 4

5 GENERAL Information Care and Maintenance Painted Steel Aluminum The polyurethane painted finish on the metal table base does not require special maintenance. Regular dusting with a soft cloth or duster is usually sufficient. If a cleaning agent seems to be necessary, we suggest your using a mild detergent spray. We recommend you treat painted surfaces as you would the paint on your car. Never use any solvent based cleaners. This includes any of the alcohol based cleaners. Light scratches can be cleaned using a small amount of cleanser (or specific commercial cleaner for aluminum) and a clean cloth with plenty of water. PLANTERS - We recommend installing a liner in each planter to prevent the metal from reacting to any potential chemicals from fertilizers or chemicals, etc. Stainless Steel Top Wash stainless steel with soapy water, or a mild detergent or a standard stainless steel cleaner, thoroughly rinse with clean water and polish with a soft dry cloth. We recommend you treat the 3R Lids and 7R Tops silk screened ink surface as you would the paint on your car. Never use any solvent based cleaners. This includes any of the alcohol based cleaners. The clear glass top can be cleaned with the application of any glass or mirror spray cleaner and a soft cloth. The etched side of the glass top should be mounted on the bottom. Care in handling will reduce the frequency of marking by body oils. Fingerprints on the etching may be removed with Windex or similar product or (strange as it may seem) by rubbing with styrofoam. Marble, Granite and Quartz Top All stone table tops are sealed with several coats of a penetrating sealer but there is no stone that is maintenance free. Normal housekeeping maintenance involves periodic and washing with clean water and mildly alkaline cleaners. With a cloth wetted with cleaning solution and water, wipe the surface in small overlapping sweeps, immediately rinse with clean water, and buff with a dry soft cloth. If desired, when the surface is completely dry, a top-dressing for use on marble to prevent staining and water-spotting may be applied. All spills should be removed immediately and water-rinsed to remove all traces of the spill. If necessary, clean the surface as described above. Although marble and granite are hard surfaces, they are not so hard that they don t scratch. Coasters should be placed under glasses, particularly those containing liquors or citrus juices; hot-plates under heated dishes; and place mats or felt bottoms under china, ceramics, silver, and objects to prevent scratching of the polished surfaces. Proper care of the stone table top is important to maintaining its beauty. Plastic Laminate Wood To clean the surface, use a damp cloth or sponge and a mild soap or detergent. EKITTA recommends obtaining current detailed care and maintenance information directly from the plastic laminate manufacturer. HI-MACS care and maintenance information is available directly from the manufacturer LG Hausys. For day to day cleaning, warm soapy water is recommended. Rinse and towel dry to prevent spotting. EKITTA wood products are protected by a stain-resisting finish. For normal cleaning, wipe surface with a soft, damp (not wet) cloth. 5

6 GENERAL Information Specifications The standard glass which tops all tables in our pricelist. All glass is made according to government specifications (DD-G-451-C) and may contain defects. These defects are inherent in the manufacturing and are within specification. All glass has a natural green tint, and the tint is more noticeable when the glass is thicker or larger. Starphire A clearer (less green) glass that is available. Requires a price quote from EKITTA. Etched The standard glass that is sandblasted on one side. The sandblasted side is mounted on the bottom, thus creating an opaque or frosted appearance. Etched glass is quoted in the pricelist. Tempered Clear glass that has been manufactured to withstand greater stresses than annealed glass. Although sometimes referred to as safety glass, it is breakable, but it will break into small blunt fragments. Requires a price quote from EKITTA. Stone Granite, marble,limestone and quartz listed on page 6 are the standard stone options available for table tops. An edge detail option and the type of stone must be selected when specifying. In addition to the stones listed, other marbles and granites are available; please contact EKITTA for availability and prices. EKITTA makes no attempt to guarantee consistency of color or texture of stone from piece to piece. Both marble and granite are organic products; therefore, they vary widely in color and texture. Granite is a very hard and durable stone which is impervious to most stains and requires minimal maintenance. Quartz is stain resistant, denser that granite, GreenGuard compliant, antibacterial, scratch resistant and requires minimal maintenance. Marble is hard and smooth, but is not completely impervious to staining and scratching. Limestone is softer and more porous than marble and is recommended for surfaces with low use. Antiqued marble is marble that has been treated to have a distressed surface. It is not recommended for surfaces that will be used for writing or eating. Honed stone surfaces are duller in appearance than polished stone surfaces and must be sealed. Some stones are available in antiqued or honed surfaces. Pricing for stone with these surfaces is advanced one grade. Wood The external wooden parts incorporated in EKITTA products are the highest grade of maple or cherry. These woods, like other natural materials, are subject to variation in grain and coloration. No guarantee will be made of an exact match to EKITTA finish samples. Custom wood finish samples must accompany the purchase order. Orders specifying custom wood finishes will be scheduled for production upon receipt of an approved customer s custom wood sample match. An upcharge of $125 NET per order will apply for each custom wood finish sample. Plastic Laminate Plastic laminate pricing is based on Wilsonart -38 Fine Velvet and -60 Matte finishes. Wilsonart laminates are GREENGUARD INDOOR AIR QUALITY CERTIFIED Pricing will be determined by the price of the specified laminate, lead time will be based upon the availability of the laminate material. Contact info@ekitta.com for quote. Painted Metal Finishes Aluminum Stainless Steel es are polyurethane enamel coating with superior durability and excellent impact resistance. Paint finish samples listed are considered standard finishes. All other paint finishes require a price quote from EKITTA. The metal aluminum is a non-ferrous alloy that is light weight and resistant to corrosion. It can be finished to a natural silvery color or receive an anodized color. Anodizing is an oxidation process that is a permanent and integral part of the aluminum. It is available on limited product, only where noted. The metal stainless steel is an iron-base alloy containing chromium, which contributes to this material s resistance to corrosion. Depending on the addition of minerals to the alloy, stainless steel s tensile strength, toughness, and corrosion resistance can be enhanced. Stainless steel s finish is a natural silvery color that is very durable and easily maintained. 6

7 GENERAL Information Stone and * Edge Detail Options Name Profile Flat Polished Edge* (Standard Edge Detail) Pencil Polished Edge* (Contact Ekitta for Quote) Bevel Edge* (Contact Ekitta for Quote) Ogee Edge* (Contact Ekitta for Quote) Bullnose Edge (Contact Ekitta for Quote) Half Bullnose Edge (Contact Ekitta for Quote) Knife Edge (Contact Ekitta for Quote) Laminated Flat Edge (Contact Ekitta for Quote) Laminated Bullnose Edge (Contact Ekitta for Quote) * Indicates Edge Detail Option Name 3/4 Clear 3/4 Etched 3/4" Star White 1/2 Clear 1/2 Etched 1/2 Starphire Requires Quote 1/2 Tempered Requires Quote 3/8 Clear 3/8 Etched 3/8 Starphire Requires Quote 3/8 Tempered Requires Quote Bronze Tinted Smoke Tinted Requires Quote Requires Quote Marble Granite Quartz Name Carrara Madhave Green Roman Travertine Crema Marfil Dark Emperador Moleanos Limestone Grade Name Brazilian Black Brown Najaran Deer Brown Impala Luna Pearl Bianco Romano Brown Pearl Dakota Mahogany Giallo Veneziano Gold Leaf Rajah Black (Absolute) Santa Ceceila Lt. Verde Labrador Grade Name Arabescato Braun Autumn Spice Bianco Cafe Du Monde Cafe Dunkel Cafe Latte Latte Beige Prisma Black Prisma Cloud Arabescato Gris Bianco Bianco Grade Requires Quote Requires Quote HI-MACS Blue Pearl Requires Quote Arctic White Honed Surfaces Antiqued Surfaces Requires Quote Requires Quote Paint Wood Plastic Laminate Name Black White Charcoal Pewter Charcoal Metallic Silver Metallic Tan Nickel Metallic Chocolate Bronze Metallic Dark Bronze Metallic P10 P15 P20 P30 P40 P55 P65 P70 P75 P80 P90 Name Maple with clear finish Cherry with clear finish Medium Cherry stain Dark Cherry stain Walnut stain Ebonized stain* *Available exclusively on solid wood: Asti, Como and Larkspur. W10 W20 W30 W40 W50 W60 Plastic laminate pricing is based on Wilsonart -38 Fine Velvet and -60 Matte Other finishes and manufacturers requires quote Bauhaus Red Requires Quote P100 7

8 GENERAL Information Cushion Options Types Shapes A C E F G J Square available in Types A C E & F Round available in Types E & F Profiles A Knife edge with no exposed stitching F Box cushion with top and bottom 1/4 perimeter welt cord C Box cushion with top and bottom 1/4 perimeter welt cord and 6 square biscuit tuft detail G Top stitched panels and strips Please contact EKITTA for all COM & COL shipping Instructions. E 4-Panel cushion with top-stitch detail J 5" High (or 2" High) cushion with 2 straight tufts All cushions A-G are 2 thick dense foam with polyester fiberfill wrap. Upholstery is available in customer s own material, customer s own leather or Garrett (Grade 1 & 2) and Edelman (Grade 3 & 4) leather listed below. Contact Ekitta for a quote on other leathers offered by Garrett or Edelman. Please specify application of COM if you desire it to be applied in a particular direction. COM yardage is based on 54 wide material. Square footage for COL is based on hides measuring a minimum of 50 to 55 usable square feet. The shape of the hide or hides containing excessive holes, cuts or other imperfections may make it necessary for additional leather to be requested after COL is received. TYPE A G C E J F BOLSTER* SIZE 26"x26" 36" x 36" 60" x 18" 60" x 24" 72" x 18" 72" x 24 " 24" dia 36" dia 26" x 26" 36" x 36" 60" x 18" 60" x 24" 72" x 18" 72" x 24" *20"x 20"x 14" 24" dia 36" dia 26" x 26" 36" x 36" 60" x 18" 60" x 24" 72" x 18" 72" x 24" 52"w or 54"w 64"w COM Yardage COL Square Ft. Grade 1 Avion Berkshire Grade 2 Chatham Grade 3 Dream Cow Grade 4 Royal Hide *Request square footage requirements for orders with seat cushion and bolster of same leather. 8

9 GENERAL Information Environmental Awareness As industry leaders, it is our responsibility to advocate the protection and preservation of our environment. At Ekitta, we have an obligation to our clients, ourselves and the world community to promote recycling, reuse and responsibility in all policies and practices of our business. For the manufacturing of our products, we are dedicated to the purchasing of metals from suppliers who are vested in recycling, channeling waste solvents through recovery companies and recycling all scrap metals. We strive to formulate finishes that maximize employee safety as well as minimize environmental impact. We are continuously on the lookout for the most up-to-date research and technology to improve our in-house recycling and reuse methods. Even our product binder is made of 100% recycled newspaper. Ekitta metal products are 100% recyclable, and hand made in Austin, Texas, by skilled employees who take pride in fabricating a quality product. Each product is made to order with the finest craftsmanship and attention to detail, using materials supplied by companies located in the USA. We owe Nature, in part, for our success and acknowledge this by striving to be environmentally sensitive in all aspects of our business. Made in America EKITTA designs and manufactures 100% of the products in America and engages suppliers located close to our own manufacturing facility minimizing the environmental impact of our products from cradle to gate. 9

10 Abacus Etched (Base Only) (Base & Top Option) 1 and 3/4 tubular steel 42 dia x 17h (Base Only) (Base & Top Option) Conference Table 1 and 3/4 tubular steel 48 dia x 29h (Base Only) (Base & Top Option) 1 and 3/4 tubular steel 36w x 36d x 17h OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base Only) (Base & Top Option) 1 and 3/4 tubular steel 48w x 30d x 17h (Base Only) (Base & Top Option) 1 and 3/4 tubular steel w x 42d x 17h Please specify paint finish. 2. For stone cut to contour of base, add 15% of Base Only price. 3. Please specify type of stone if purchasing stone top. 4. For special glass and stone edge details, see Edge Detail Option Information. 5. For special sizes, finishes, and options, please contact EKITTA.

11 Abacus Etched (Base Only) (Base & Top Option) Conference Table 1 and 3/4 tubular steel 48w x 48d x 29h (Base Only) (Base & Top Option) Table Desk 1 and 3/4 tubular steel 60w x 30d x 29h (Base Only) (Base & Top Option) Table Desk 1 and 3/4 tubular steel 72w x 36d x 29h (Base Only) (Base & Top Option) Conference Table 1 and 3/4 tubular steel 96w x 48d x 29h Please specify paint finish. 2. For stone cut to contour of base, add 15% of Base Only price. 3. Please specify type of stone if purchasing stone top. 4. For special glass and stone edge details, see Edge Detail Option Information. 5. For special sizes, finishes, and options, please contact EKITTA.

12 Arris Etched 1/2" Flat Polished (Base Only) (Base & Top Option) 3/4 tubular steel ALTERNATE SATIN ALUMINUM OR STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) 36 dia x 15h 3/4 tubular steel 42 dia x 15h ALTERNATE SATIN ALUMINUM OR STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) 3/4 tubular steel 48 dia x 15h ALTERNATE SATIN ALUMINUM OR STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) (Base Only) (Base & Top Option) (Base Only) (Base & Top Option) 1 tubular steel 36w x 36d x 15h 1 tubular steel 42w x 42d x 15h Conference Table 1 tubular steel 42w x 42d x 29h ALTERNATE SATIN ALUMINUM OR STAINLESS STEEL BASE ADD $ ALTERNATE SATIN ALUMINUM OR STAINLESS STEEL BASE ADD $ ALTERNATE SATIN ALUMINUM OR STAINLESS STEEL BASE ADD $ Please specify paint finish or alternate aluminum or stainless steel finish 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and options, please contact EKITTA.

13 Ashland 1/2 Flat Polished Etched (Base Only) (Base & Top Option) Conference Table Tubular steel 60 dia x 29h (Base Only) (Base & Top Option) Conference Table / Table Desk Tubular steel 72w x 42d x 29h (Base Only) (Base & Top Option) Conference Table Tubular steel 72w x 48d x 29h Racetrack (Base Only) (Base & Top Option) Conference Table Tubular steel 96w x 48d x 29h Please specify paint finish. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and ottions, please contact EKITTA.

14 Ashland Etched (Base Only) (Base & Top Option) Conference Table Tubular steel 96w x 48d x 29h Racetrack (Base Only) (Base & Top Option) Conference Table Tubular steel 144w x 48d x 29h (Base Only) (Base & Top Option) Conference Table Tubular steel 168w x 54d x 29h Please specify paint finish. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and options, please contact EKITTA.

15 Asti Etched 1/2" Flat Polished (Base Only) (Base & Top Option) /8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 18 dia x 22h (Base Only) (Base & Top Option) /8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 20w x 20d x 22h (Base Only) (Base & Top Option) /8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 22 dia x 22h (Base Only) (Base & Top Option) /8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 26w x 20d x 22h (Base Only) (Base & Top Option) 3/8 x 1 1/2 aluminum bar, brushed finish Solid wood detail OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 36 dia x 16h (Base Only) (Base & Top Option) /8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 42w x 24d x 16h Ellipse 15

16 Asti Etched (Base Only) (Base & Top Option) /8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 42w x 24d x 16h (Base Only) (Base & Top Option) 1770 Console Table 3/8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 54w x 18d x 29h (Base Only) (Base & Top Option) 1820 Console Table 3/8 x 1 1/2 aluminum bar, brushed finish Solid wood detail 60w x 18d x 29h (Base Only) (Base and Cushion Option) (Base Only) (Base and Cushion Option) 2390 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. Bench 3/8 x 1 1/2 stainless steel bar, brushed finish Solid wood detail and 2 cushion 60w x 18d x 18h 2620 Bench 3/8 x 1 1/2 stainless steel bar, brushed finish Solid wood detail and 2 cushion 72w x 18d x 18h FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base and Table Frame) (Base and Table, add Cushion Option) Bench and Table 3/8 x 1 1/2 stainless steel bar, brushed finish Solid wood detail and 2 cushion 12w x 18d table top 72w x 18d x 18h 16 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 1. Please specify wood detail. See standard wood finishes. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and options, contact EKITTA. 5. Brushed stainless steel construction available. Contact EKITTA for quote.

17 Athena Etched (Base Only) (Base & Top Option) /4 tubular steel with contrasting X metal inserts 26w x 20d x 20h (Base Only) (Base & Top Option) 3/4 tubular steel with contrasting X metal inserts OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 26w x 26d x 20h (Base Only) (Base & Top Option) 3/4 tubular steel with contrasting X metal inserts OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 36w x 36d x 15h (Base Only) (Base & Top Option) /4 tubular steel with contrasting X metal inserts 48w x 30d x 15h (Base Only) (Base & Top Option) /4 tubular steel with contrasting X metal inserts 42w x 24d x 15h Please specify paint finish. 2. Please specify contrasting X metal inserts of polished brass, brushed aluminum or copper. 3. Please specify type of stone if purchasing stone top. 4. For special glass and stone edge details, see Edge Detail Option Information. 5. For special sizes, finishes, and options, contact EKITTA.

18 Athena Etched (Base Only) (Base & Top Option) Conference Table 3/4 tubular steel with contrasting X metal inserts 48w x 48d x 29h (Base Only) (Base & Top Option) Console Table 3/4 tubular steel with contrasting X metal inserts w x 18d x 32h (Base Only) (Base & Top Option) Conference Table / Table Desk 3/4 tubular steel with contrasting X metal inserts 72w x 36d x 29h (Base Only) (Base & Top Option) Bench 3/4 tubular steel with contrasting X metal inserts 2 cushion FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 60w x 18d x 18h (Base Only) (Base & Top Option) Bench 3/4 tubular steel with contrasting X metal inserts 2 cushion 72w x 18d x 18h 18 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 1. Please specify paint finish. 2. Please specify contrasting X metal inserts of polished brass, brushed aluminum or copper. 3. Please specify type of stone if purchasing stone top. 4. For special glass and stone edge details, see Edge Detail Option Information. 5. For special sizes, finishes, and options, contact EKITTA.

19 Avant Collection Alexander Solid steel bar welded to flat steel contoured top 17 dia x 19h Antoine Solid steel bar welded to flat steel contoured top 15 dia x 19h Joan Solid steel bar welded to flat steel contoured top 15 dia x 19h 1. Please specify paint finish. 2. Avant series is suitable for exterior use. 19

20 Axis Etched (Base Only) (Base & Top Option) Tubular steel with rolled plate cylinder 36 dia x 16h (Base Only) (Base & Top Option) Conference Table Tubular steel with rolled plate cylinder 42 dia x 29h (Base Only) (Base & Top Option) Conference Table Tubular steel with rolled plate cylinder dia x 29h (Base Only) (Base & Top Option) Conference Table Tubular steel with rolled plate cylinder 54 dia x 29h (Base Only) (Base & Top Option) Conference Table Tubular steel with rolled plate cylinder 60 dia x 29h (Base Only) (Base & Top Option) Conference Table Tubular steel with rolled plate cylinder 96w x 48d x 29h Please specify paint finishes for cylinder base and cross member. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and options, please contact EKITTA.

21 Basel Plastic Laminate w/ PVC Edge & Under 1/2" 3/4" flat polished 3/4" flat polished 3/4" flat polished Steel Painted Finish ALTERNATE SATIN STAINLESS STEEL BASE ADD $ dia x 22h Steel Painted Finish ALTERNATE SATIN STAINLESS STEEL BASE ADD $ dia x 16h Stool Steel Painted Finish Triangle Shaped cushion w/topstitched detail PRICE INCLUDES CUSHION UPHOLSTERED IN COM OR COL. COM YARDAGE REQUIREMENT:.75 (54" WIDE NO PATTERN REPEATS) COL SQUARE FOOTAGE REQUIREMENT: 9 SQ. FT. 18w x 18h Stool Steel Painted Finish Triangle Shaped cushion w/topstitched detail PRICE INCLUDES CUSHION UPHOLSTERED IN COM OR COL. COM YARDAGE REQUIREMENT:.75 (54" WIDE NO PATTERN REPEATS) COL SQUARE FOOTAGE REQUIREMENT: 9 SQ. FT. 18w x 26h 1. Please specify paint finish. 2. Please specify type of top 3. When specifying plastic laminate, please select PVC edge and under side. Color options are White or Black. 4. Upholstery for stool to be approved by EKITTA 5. For special sizes, finishes, and edge options, please contact EKITTA 21

22 Ballast Design Your Own Ballast Table From the options below, choose a top and a base for a table. Put them together and you have a unique, one-of-a-kind table design solution. Top size 18 dia 18 dia 24 dia 36 dia 15 dia 16w x 13d Base size (includes top thickness) w x 10d x 15h 10w x 10d x 20h 14w x 14d x 20h 22w x 22d x 15h 10w x 10d x 36h w x 10d x 19h 3/8 Clear Starphire /8 Etched Clear Starphire /4 Stone Grade Grade Grade Base Options Painted Steel Wood Veneer Stone Grade Grade Grade Please specify wood finish, if wood base. 2. Please specify paint finish, if painted steel base. 3. Please specify type of stone, if stone base. 4. For special glass and stone edge details, see Edge Detail Option Information. 5. For special sizes, finishes, and options, please contact EKITTA. 6. Off-set design, number and placement of supports are subject to manufacturer's review. 7. Pivot option is discontinued.

23 Ballast Top size Base size (includes top thickness) 21w x 20d 26w x 17d ellipse 24 dia 26 dia 48w x 24d ellipse 2-26dia w x 14d x 22h 16w x 10d x 22h 22w x 16d x 22h 30w x 12d x 15h 36w x 10d x 15h 42w x 12d x 15h 3/8 Clear Starphire /8 Etched Clear Starphire /4 Stone Grade Grade Grade Base Options Painted Steel Wood Veneer Stone Grade Grade Grade Please specify wood finish, if wood base. 2. Please specify paint finish, if painted steel base. 3. Please specify type of stone, if stone base. 4. For special glass and stone edge details, see Edge Detail Option Information. 5. For special sizes, finishes, and options, please contact EKITTA. 6. Off-set design, number and placement of supports are subject to manufacturer's review. 7. Pivot option is discontinued. 23

24 Berkeley Etched (Base Only) (Base & Top Option) (Base Only) 1/2 & 1 1 /2 solid steel 18 dia x 22h (Base & Top Option) 1/2 & 1 1 /2 solid steel 24 dia x 22h OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base Only) (Base & Top Option) (Base Only) 1/2 & 1 1 /2 solid steel 26w x 20d x 22h (Base & Top Option) 1/2 & 1 1 /2 solid steel 26w x 26d x 22h OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base Only) (Base & Top Option) 1/2 & 1 1 /2 solid steel 36 dia x 15h OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base Only) (Base & Top Option) 1/2 & 1 1 /2 solid steel 42w x 24d x 15h

25 Berkeley Etched (Base Only) (Base & Top Option) /2 & 1 1 /2 solid steel 48w x 24d x 15h Ellipse (Base Only) (Base & Top Option) Console Table 1/2 & 1 1 /2 solid steel 54w x 20d x 29h (Base Only) (Base & Top Option) Console Table 1/2 & 1 1 /2 solid steel 54w x 20d x 29h Ellipse (Base Only) (Base and Cushion Option) Bench 3/8 x 1 1/2 steel bar 2 cushion FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 60w x 18d x 18h (Base Only) (Base and Cushion Option) Bench 3/8 x 1 1/2 steel bar 2 cushion FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 72w x 18d x 18h Please specify paint finish. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and options, please contact EKITTA.

26 Berlin Etched (Base Only) (Base & Top Option) 3/8 x 1 1/2 Steel 26w x 20d x 18h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) 3/8 x 1 1/2 Steel 26w x 26d x 18h ALTERNATE SATIN STAINLESS STEEL BASE ADD $600 OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base Only) (Base & Top Option) 3/8 x 1 1/2 Steel 42w x 20d x 12h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) 3/8 x 1 1/2 Steel painted finish 48w x 24d x 12h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) 3/8 x 1 1/2 Steel ALTERNATE SATIN STAINLESS STEEL BASE ADD $760 60w x 16d x 12h Please specify paint finish or alternate stainless steel finish. 2. Please specify type of stone if purchasing stone top. 3. For special sizes, finishes, and options, please contact EKITTA. 4. Coffee tables available at custom 15"h at no additional cost.

27 Berlin Etched (Base Only) (Base & Top Option) Console Table 3/8 x 1 1/2 Steel ALTERNATE SATIN STAINLESS STEEL BASE ADD $930 54w x 18d x 29h (Base Only) (Base and Cushion Option) Bench 3/8 x 1 1/2 Steel 2 cushion 60w x 18d x 18h ALTERNATE SATIN STAINLESS STEEL BASE ADD $770 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE (Base Only) (Base and Cushion Option) Bench 3/8 x 1 1/2 Steel 2 cushion 72w x 18d x 18h ALTERNATE SATIN STAINLESS STEEL BASE ADD $820 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE Please specify paint finish or alternate stainless steel finish. 2. Please specify type of stone if purchasing stone top. 3. For special sizes, finishes, and options, please contact EKITTA. 4. Coffee tables available at custom 15"h at no additional cost.

28 Bridge Etched (Base Only) (Base & Top Option) Brushed stainless steel stretchers Wood panels 48w x 24d x 16h FOR OPTIONAL 1/4" GLASS SHELF ADD $220 TO LIST (Base Only) (Base & Top Option) Console Table Brushed stainless steel stretchers Wood panels 54w x 20d x 29h FOR OPTIONAL 1/4" GLASS SHELF ADD $210 TO LIST (Base Only) (Base & Top Option) Console Table Brushed stainless steel stretchers Wood panels 60w x 20d x 29h FOR OPTIONAL 1/4" GLASS SHELF ADD $240 TO LIST (Base) ( Base & Cushion Option) 2130 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE PRICE. Bench Brushed stainless steel stretchers Wood panels 2" Cushion 60w x 18d x 18h Please specify wood. See standard wood finishes. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option. 4. For special sizes, finishes, and options, please contact EKITTA.

29 Bridge (Base) ( Base & Cushion Option) 2220 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE PRICE. Bench Brushed stainless steel stretchers Wood panels 2" Cushion 72w x 18d x 18h (Base) (Base, Tables and Cushion Option) Bench with Table Brushed stainless steel stretchers Wood panels 60" wide Cushion 1-12w x 18d table top FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE WITH TABLE PRICE. CUSHION IS 60w x 18d x 2h w x 18d x 18h Please specify wood. See standard wood finishes. 2. Please specify type of stone if purchasing stone top. 3. For special glass and stone edge details, see Edge Detail Option Information. 4. For special sizes, finishes, and options, please contact EKITTA.

30 Canton Etched Laminate 3/4 w/ Black Edge (Base Only) (Base & Top Option) /4 & 1 1/4 tubular steel with inserted or surface mounted top 26w x 20d x 22h (Base Only) (Base & Top Option) /4 & 1 1/4 tubular steel with inserted or surface mounted top OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 26w x 26d x 22h (Base Only) (Base & Top Option) /4 & 1 1/4 tubular steel with inserted or surface mounted top OTTOMAN AVAILABLE. FOR CUSHION PRICING REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 36w x 36d x 15h (Base Only) (Base & Top Option) /4 & 1 1/4 tubular steel with inserted or surface mounted top 42w x 42d x 15h All prices are for Canton tables with painted vertical uprights; for brass or aluminum uprights option, add $60.00 net upcharge. 2. Please specify paint finish. 3. Please specify if table top is to be inserted or surface mounted (option - no upcharge). 4. Please specify type of stone or laminate for appropriate top. 5. For special glass and stone edge details, see Edge Detail Option Information. 6. For special sizes, finishes, and options, please contact EKITTA. 7. Aluminum construction available. Contact EKITTA for price.

31 Canton Etched Laminate 3/4 w/ Black Edge (Base Only) (Base & Top Option) /4 & 1 1/4 tubular steel with inserted or surface mounted top 48w x 30d x 15h (Base Only) (Base & Top Option) Console Table 3/4 & 1 1/4 tubular steel with inserted or surface mounted top 54w x 18d x 30h (Base Only) (Base & Top Option) Conference Table / Table Desk 3/4 & 1 1/4 tubular steel with inserted or surface mounted top 72w x 36d x 29h (Base Only) (Base and Cushion Option) Bench 3/4 & 1 1/4 tubular steel Surface mounted top 2 cushion FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. 60w x 18d x 18h (Base Only) (Base and Cushion Option) FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. Bench 3/4 & 1 1/4 tubular steel Surface mounted top 2 cushion 72w x 18d x 18h All prices are for Canton tables with painted vertical uprights; for brass or aluminum uprights option, add $60.00 net upcharge. 2. Please specify paint finish. 3. Please specify if table top is to be inserted or surface mounted (option - no upcharge). 4. Please specify type of stone or laminate for appropriate top. 5. For special glass and stone edge details, see Edge Detail Option Information. 6. For special sizes, finishes, and options, please contact EKITTA. 7. Aluminum construction available. Contact EKITTA for price.

32 Chicago Etched (Base Only) (Base & Top Option) Solid steel 20w x 20d x 22h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Solid steel 20w x 20d x 22h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Solid steel 26w x 20d x 22h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Solid steel 42w x 20d x 15h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Solid steel ALTERNATE SATIN STAINLESS STEEL BASE ADD $850 48w x 15 (24) d x 15h Boat Leg Detail Options straight tapered 32

33 Chicago Etched (Base Only) (Base & Top Option) Console Table Solid steel 54w x 18d x 29h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Console Table Solid steel 60w x 18d x 29h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Ottoman Solid steel 20w x 20d x 18h 1420 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Bench Solid steel 2 Cushion 60w x 18d x 18h 1480 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Bench Solid steel 2 Cushion 1580 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. ALTERNATE SATIN STAINLESS STEEL BASE ADD $950 72w x 18d x 18h All prices shown are for Straight leg detail; for Tapered leg detail option, add 10% of Base Only price. 2. Please specify leg detail option by name. 3. Please specify paint finish or alternate stainless steel finish. 4. Please specify type of stone if purchasing stone top.

34 Chicago (Base Only) (Base & Top Option) Bench with Bolster Solid steel 2 Cushion with 52" bolster 1780 FOR CUSHION AND BOLSTER PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. FOR 52" BOLSTER with COM/COL ADD $ ALTERNATE SATIN STAINLESS STEEL BASE ADD $ w x 24d x 18h (Base Only) (Base & Top Option) Bench with Bolster Solid steel 2 Cushion with 64" bolster FOR CUSHION AND BOLSTER PRICING, REFER TO PAGE 8. ADD TO BASE ONLY PRICE. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ w x 24d x 18h All prices shown are for Straight leg detail; for Tapered leg detail option, add 10% of Base Only price. 2. Please specify leg detail option by name. 3. Please specify paint finish or alternate stainless steel finish. 4. Please specify type of stone if purchasing stone top.

35 Classico Collection Lucca Etched (Base Only) (Base & Top Option) Lucca Solid steel, painted finish 20 dia x 22h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Lucca Solid steel, painted finish 20 x 20 x 22h ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Lucca Solid steel, painted finish ALTERNATE SATIN STAINLESS STEEL BASE ADD $ dia x 16h (Base Only) (Base & Top Option) Lucca Solid steel, painted finish ALTERNATE SATIN STAINLESS STEEL BASE ADD $830 48w x 24d x 16h (Base Only) (Base & Top Option) Lucca Console Table Solid steel, painted finish ALTERNATE SATIN STAINLESS STEEL BASE ADD $920 54w x 18d x 29h (Base Only) (Base & Top Option) Lucca Bench Solid steel, painted finish 60w x 18d x 18h 1420 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE ALTERNATE SATIN STAINLESS STEEL BASE ADD $ Please specify paint finish or alternate stainless steel finish. 2. Please specify type of stone if purchasing stone top. 3. For special sizes, finishes, and options, please contact EKITTA.

36 Classico Collection Genova Etched (Base Only) (Base & Top Option) Genova Solid steel, painted finish 20 dia x 22h OPTIONAL LOWER STRETCHER. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Genova Solid steel, painted finish 20 x 20 x 22h OPTIONAL LOWER STRETCHER. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Genova Solid steel, painted finish 36 dia x 16h OPTIONAL LOWER STRETCHER. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Genova Solid steel, painted finish 48w x 24d x 16h OPTIONAL LOWER STRETCHER. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ (Base Only) (Base & Top Option) Genova Console Table Solid steel, painted finish ALTERNATE SATIN STAINLESS STEEL BASE ADD $730 54w x 18d x 29h (Base Only) (Base & Top Option) Genova Bench Solid steel, painted finish 60w x 18d x 18h 1400 FOR CUSHION PRICING, REFER TO PAGE 8. ADD TO BASE PRICE. ALTERNATE SATIN STAINLESS STEEL BASE ADD $ Coffee and end table available with or without lower stretchers. Please specify, option at no upcharge. 2. Please specify paint finish or alternate stainless steel finish. 3. Please specify type of stone if purchasing stone top. 4. For special sizes, finishes, and options, please contact EKITTA.