CV19 SERIES SAFETY RELIEF VALVE
|
|
- Carmella McDowell
- 5 years ago
- Views:
Transcription
1
2 CV19 SRIS SATY RLI VALV eatures: Bronze Construction ASM and CRN Certifications (C Opt) Teflon PA lourocarbon Seat Optional Anti-Vibration ampened Lever Maximum Temperature 0 o Set Pressure Ranges - 300PSI in 5 PSI Increments NPT SIZ Inlet X Outlet Part # 1/ x x x x x x x 1-1/ 1-1/ x 1-1/ 1-1/ x x x 2-1/ 2-1/ x 2-1/ CV19-06-** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** MRV10 ow to Order CV19 Series Safety Relief Valve CV A - Valve Series Inlet Outlet Set 04=1/ 06= 08= 10= 12=1-1/ 16= 20=2-1/ 06= 08= 10= 12=1-1/ 16= 20=2-1/ Pressure (PSI) - 300PSI in 5 PSI increments Service Media = Steam U = Steam A = Air V UV UV
3 imensions PART # A B C Inlet Outlet NPT NPT Orifice CV19-06-** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** CV ** / 1-1/ 1-1/ 2-1/ 1-1/ 1-1/ 2-1/ 2-1/ Outlet A C Inlet B Lift Washer Lever Pin Pin Adjusting Screw Washer isc Seat Insert Ring Nut Lift Lever Lock Screw uide Ring Screw Ring Screw escription Nut Lock Screw Lift Lever Washer iude Ring isc uide Ring Screw Nozzel Ring Screw Bill of s escription Seat Insert Steel (plated) Lift Washer lever Pin Steel (plated) Adj.Screw Locknut Bronze Adjusting Screw Ring Nameplate PA Teflon Steel (plated) Steel (plated) Steel (plated) stainless Steel MRV11
4 CV19 SRIS LOW ATA ALL SPCIICATIONS AN IMNSIONS SUBCT TO CAN WITOUT NOTIC = V STAM U = UV STAM A = UV AIR IR VSSLS UNIR VSSLS UNIR VSSLS ASM SCTION I-POWR BOILRS 19 SRIS BRONZ SATY VALVS STAM ASM SCTION VIII-PRSSUR VSSL 19 SRIS BRONZ SATY VALVS STAM ASM SCTION VIII-PRSSUR VSSL 19 SRIS BRONZ SATY VALVS AIR CAPACITY CART - POWR BOILR CO A.S.M.. (V) RATIN-90% O ACTUAL CAPACITY AT 3% ACCUMULATION CAPACITY IN POUNS O SATURAT STAM PR OUR ST Pressure (PSI) MOL CV19-06-** CV ** U A MOL CV ** CV ** U A CAPACITY CART - PRSSUR VSSL CO A.S.M.. (UV) RATIN-90% O ACTUAL CAPACITY AT 10% ACCUMULATION CAPACITY IN POUNS O SATURAT STAM PR OUR MOL CV ** CV ** U A MOL CV ** CV ** U A CAPACITY CART - PRSSUR VSSL CO A.S.M.. (UV) RATIN-90% O ACTUAL CAPACITY AT 10% ACCUMULATION CAPACITY IN CUBIC T O PR MINUT AT 14.7 P.S.I.A.-60 O MOL CV ** CV ** U A MOL CV ** CV ** U A MRV ** esignates Pressure Setting of Valve, ( xample: CV A )
5 CV0 SRIS SATY RLI VALV eatures: Bronze, Carbon, or all Construction Trim esign, Suitable for Steam, Air, as, Liquid Metal to Metal, PCT or lastomer O-Ring Seats Short Tuned Blowdown and Back Pressure Tight Minimizes ugitive missions and Product Loss ASM Section VIII Air, Steam and Liquid Services, Sizes 1/ to NPT Available Set Pressure Range 5 to 800 o Maximum igh acity full esign, s Integral Lift Stop, Self-Aligning Pivoting isc API 527 Seat Tightness, Standard for all Models CSA B51 CRN O8547-SC Options Screwed (standard), Packed Lift Lever, Special Cleaning and Test ags Available lastomer or PCT Soft Seats for xceptional Tightness igh Temperature Alloy s for 422 o to 800 o Service Cryogenic Preperation to -0 o (consult factory) Soft Seat Pressure & Temperature Limits Seat Set Pressure Temperature Min. Max. Min. Max. VITON PM SILICON NOPRN NITRIL/BUNA-N PCT 0 - o -70 o -60 o -35 o -30 o -320 o 0 o 2 o 4 o 225 o 2 o 2 o Metal to Metal Pressure/Temperature Ratings Series CV51 CV52 CV53 CV54 Trim Max. Set-Steam Max.Set-Air,as, Liquid Temp. Limits Bronze Bronze Carbon Stainless Stainless Stainless Stainless 2 PSI 300 PSI -60/6 O 300 PSI PSI / 600 PSI / 0 PSI / PSI / 600 PSI / 0 PSI / PSI / 600 PSI / 0 PSI / PSI / 600 PSI / 0 PSI / PSI / 600 PSI / 0 PSI / -60/422 O -20/800 O -60/800 O PART NO. CV5**-06 CV5**-08 CV5**-0606 CV5**-0608 CV5**-0610 CV5**-0810 CV5**-0812 O R I I C ROUP INLT/OUTLT PART NO. O R I I C ROUP INLT/OUTLT 1/ MNPT X NPT * 1/ MNPT X NPT MNPT X NPT * MNPT X NPT MNPT X NPT MNPT X NPT CV5**-1012 CV5**-1016 CV5**-1216 CV5**-1220 CV5**-1620 CV5**-1624 MNPT X 1-1/ NPT MNPT X NPT 1-1/ MNPT X NPT 1-1/ MNPT X 2-1/ NPT MNPT X 2-1/ NPT MNPT X 3 NPT MNPT X 1-1/ NPT * Available in series CV51 & CV52 Only MRV13
6 CV0 SRIS SATY RLI VALV CV51 Series CV51 = Bronze/ CV52 = Bronze/ Stainless CV53 = Carbon/ Stainless CV54 = All Stainless Note: ow to Order CV0 Series Relief Valve 1-1 = Screwed 2 = Screwed+gag 3 = Packed Lever 4 = Packed+gag M K Size 06* * Set Pressure 5- PSI Available Seat M=Metal B=Buna-n =PM K=PCT N=Neoprene S=Silicone V= Service Code = Sec VIII liquid K = Sec VIII air/gas L = Sec VIII steam M = Non Code liquid N = Non Code air/gas P = Non Code steam Q = Vacuum Orifice roup 1. The ASM Code Section VIII requires a lift lever for the following services: air, steam or hot water over 1 o 2. Maximum back pressure is PSI 3. igh temperature stainless steel alloy spring is required above 422 o /217 o C Specify option T T Special Options T - igh Temperature OX = Cleaned for Oxygen (if no options needed leave blank) Inlet C Outlet B A imensions PART # A B C Inlet Outlet NPT NPT Orifice CV5**06 CV5**08 CV5**0606 CV5**0608 CV5**0610 CV5**0810 CV5**0812 CV5**1012 CV5**1016 CV5**1216 CV5**1220 CV5**1620 CV5** / 1/ 1-1/ 1-1/ 1-1/ 1-1/ 2-1/ 2-1/ 3 MRV14
7 CV0 SRIS SATY RLI VALV Screwed Adjusting Bolt Lock Screw Pin isc uide Lock Screw isc isc older Ring Seal escription Bonnet Bonnet Seal Nozzel Nozzel Seal Nozzel Ring Seal isc older isc Retaining Ring isc uide Pin Washer Adjusting Bolt Lock Nut (igh Temp) Lock Screw (screwed) Seal () Nameplate rive Screw Seal & Wire Note: 510 Series Bronze B-584-C844 * B Inconel Lead/ Lock Nut Seal (cap) Washer Bonnet Bonnet Seal Retaining Ring Nozzel Seal Nozzel Bill of s 520 Series Bronze B-584-C844 * Inconel Lead/ * Sizes, and are Cast Bronze ** Sizes and are Cast Steel *** Sizes and are Cast Type 316 Bill of s Lift Lever Option escription (Packed Lever) Cam Lever Lift Washer Locknut Collar Cam Bushing Cam O-Ring Bushing O-Ring Seal (cap) Washer 530 Series Steel SA-216 WCB Steel ** Inconel Steel Lead/ Bushing O-Ring Cam Bushing Washer Collar 513,523 Series Cam O-Ring Lever 5 Series S.S. SA-351-C8M 316 *** Inconel 316 Lead/ 533 Series Steel (packed lever) Lock Nut Lift Washer Cam Seal (cap) 543 Series 316 MRV
8 CV0 SRIS LOW ATA ALL SPCIICATIONS AN IMNSIONS SUBCT TO CAN WITOUT NOTIC AIR UV STAM UV LIQUI UV ASM SCTION VIII Air Standard Cubic eet Per Minute of Air at 10% Overpressure National Board Certified Ratings are 90% of Actual ASM SCTION VIII Steam Pounds Per our Steam at 10% Overpressure National Board Certified Ratings are 90% of Actual ASM SCTION VIII Liquid U.S. allons Per Minute of Water at 10% Overpressure National Board Certified Ratings are 90% of Actual ARA SQ.IN ST PRSSUR SCM LB/hr PM SCM LB/hr PM SCM LB/hr PM SCM LB/hr PM SCM LB/hr PM SCM LB/hr PM U U U U U U 5* 10* * Pressure Settings Below PSI are Non-ASM Code MRV16
KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS
Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationPressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
More informationSAFETY VALVES. Series 560 & Aquatrol Safety/Relief Valves SERIES. ASME Section I & VIII - NB Certified for Air, Gas and Steam
SAFETY VALVES ASME Section I & VIII - NB Certified for Air, Gas and Steam SIZES FROM 1/2 TO 2 1/2 NB RATED TO 250# TEMPERATURES TO 406 O Aquatrol s Series / valve line is a high capacity safety valve used
More informationASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
More informationPressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
More information29 Series OEM Style Bronze Safety Valves for Steam, Air and Non-Hazardous Gas
Section I Power Boilers OEM Style for Steam, Air and Non-Hazardous Gas Section VIII Pressure Vessels Conbraco is ideally suited for OEM applications where compact size, dependable performance and maximum
More informationKINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.
KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050
More informationModels 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
More information1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
More informationModels 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
More information* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationSV80H Safety and Relief Valves
age 1 of 18 I2 B ev.00 U S Safety and elief alves escription he S is a full nozzle safety and relief valve with orifices to, comply with the AI S 526, beyond others with super capacity. Suitable for gas,
More informationKINGSTON. KNG Series Product Catalog. Ph: Toll:
KEst.1908 KINGSTON KNG Product Catalog Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050 Ph: 310.326.8287 Toll: 800.210.2525 Email: sales@kingstonvalves.com Kingston Safety
More informationCRN. Series 560/570 Safety Valves. 12 Aquatrol Safety Relief Valves
Series 560/570 Safety Valves Our 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and
More informationCRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More informationCrosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
More informationTable of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
More informationKunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
More informationSAFETY RELIEF VALVES SAFETY VALVES CRYOGENIC
CRYOGENIC SAFETY RELIEF VALVES CRYOGENIC SAFETY VALVES - 241 - FIGURE 710/715 SERIES Special Teflon seat, making bubble-tight seals possible to over 90% of set pressures APPLICATION DATA per spec API 527;
More informationCompact. performance. Threaded Safety Relief Valves. Series 437 Type Series 459 Type CATALOG.
Compact performance Threaded Safety Relief Valves Series 437 Type 437 438 439 Series 459 Type 459 46 CATALOG The Safety Valve Series 459 Packed lever H4 Series 459 Balanced bellows design Series 459 Cap
More informationType 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
More informationHigh performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I.
Steam Safety Valve 9100 SAPAG High performance safety valve for the protection of large boilers and superheaters, certified to ASME Section I. Features National Board Certified to ASME I (3% overpressure,
More informationSV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
More informationCRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More information13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
More informationKingston Safety Relief Valves
Kingston Safety Relief Valves ASME Section VIII - NB Certified for Liquid, Air/Gas and Steam The safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage.
More informationType 526 IC CATALOG. Flanged Safety Relief Valves API Series. The-Safety-Valve.com
Type 526 IC Flanged Safety Relief Valves API Series CATALOG The-Safety-Valve.com General Information Overview API safety valves (LESER Type 526) are flanged safety valves that meet all the requirements
More informationSV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationCROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
More informationSAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
More informationKunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More informationSeri e s C ATA L O G. Series 526. The Safety Va l v e
API Seri e s Series 526 C ATA L O G The Safety Va l v e Type 526 Type 526 Balanced bellows design Type 526 Plain lever 3 Type 526 Open bonnet d Safety Relief s API Series Contents Contents Applications
More informationMERCER VALVE SERIES Threaded THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 SERIES Threaded MERCER VALVE THINK...MERCER FIRST 9100 Series Threaded Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the
More informationSafety and Relief Valves Product Overview
Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous
More informationMERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
More informationSAFE - ANSI / -TC / -TCP / -TCS
SAFE - ANSI / -TC / -TCP / -TCS Safety valves Angle pattern safety valve 1 to 6 ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
More informationTOSACA. Catalogue
Catalogue 2016-1 INDEX / INDICE 1216 1400 EN/DIN flanges 1216 pag. 2 1216 HP pag. 3 1400 pag. 6 1216 C pag. 4 1216 B pag. 5 1400 LP pag. 8 1415 ASME flanges Accesories 1415 pag. 9 1415 LP pag. 11 pag.
More information9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
More informationAN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
More information494C. Pilot Operated Pressure Relief Valves. Series Pilot Operated Pressure Relief Valves. Farris Engineering Pressure Relief Valves
Series 3800 Pilot Operated Pressure Relief Valves 494C Pilot Operated Pressure Relief Valves Farris Engineering Pressure Relief Valves Piloting the Way to Precision Control The innovative, integrally cast,
More information304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
More informationKUNKLE Safety and Relief ValVe PRoductS overview
KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and
More informationBest Under Pressure 3500 EBV. Safety Valve Oct 2008-CO
est Under Pressure 300 EV Safety Valve www.dresser.com 300 Oct 2008-CO 742 resser 300.qxd 9/29/0 8:10 AM Page 1 300 Scope of esign The CONSOIATE Series 300 Electromatic all Valve is designed to provide
More informationCapacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
More informationConsolidated* Valves 1511 Series Safety Valve
Technical Specifications Rev. B - 10/2018 Consolidated* Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well as
More informationKunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
More informationKunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
More informationMERCER VALVE 8100 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 8100 SERIES MERCER VALVE THINK...MERCER FIRST 8100 Series Product Overview The Mercer Valve 8100 Series Pressure Relief Valve is State of the Art in soft seat,
More informationModel 1415 TOSACA TECHNICAL DATA SHEET. Construction and materials. Technical information
Model 1415 TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation API RP 520 Connections Flanged ASME/ANSI B16.5 Design / Size API STD 526, ASME Section VIII Rating 150#/300#
More informationModel descriptions. Applications
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified. Models 920, 921 and 927 ASME Section I Special use
More information394C. Series 6400/6600. Safety Valves for Power Boiler Service
394C Series 6400/6600 Safety Valves for Power Boiler Service Series 6400/6600 Designed with the user in mind, Series 6400 and 6600 safety valves represent the most advanced technology in valves designed
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationKunkle Safety and Relief Products
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
More information, Inc. F80 Series. Enhanced Performance Conventional-Style Safety Valves SNAP-ACTING PERFORMANCE REPEATABLE, BUBBLE-TIGHT, SOFT-SEAT DESIGN
, Inc. F80 Series Enhanced Performance Conventional-Style Safety Valves SNAP-ACTING PERFORMANCE REPEATABLE, BUBBLE-TIGHT, SOFT-SEAT DESIGN ADJUSTABLE BLOWDOWN 15 TO 10,313 PSIG -423ºF TO +525ºF VARIETY
More information9100 SERIES Model 20 MERCER VALVE THINK...MERCER FIRST
9100 SERIES Model 20 MERCER VALVE THINK...MERCER FIRST 9100 Series Model 20 Product Overview The 9100 Series Model 20 is a high pressure safety relief valve designed for CNG and other high pressure applications.
More informationSAFETY RELIEF VALVES
PRESSURE RELIEF VALVE SELECTION CHART Model Material Inlet Sizes Inlet Sizes Connections CE/PED Set Pressures Set Pressures Temperature Temperature Body / Trim Min / Max, in. Min / Max, mm. NPT Flanged
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationPOWER APPLICATION SSR-S1000
POWER APPLICATION SSR-S1000 and SSR-S1100 COMPANY PSV is a company of PARCOL and SVC. PSV was founded in 2016 with the target of creating a flexible and high quality safety valve company. PSV combines
More informationSi 910. Engineering GREAT Solutions. Safety Valves acc. to ASME Sec. I, Sec. III and Sec. VIII
Engineering GREAT Solutions Safety Valves acc. to ASME Sec. I, Sec. III and Sec. VIII Features IMI Bopp & Reuther steam safety valve acc. to ASME Sec. I > High capacity > Fixed overpressure and blowdown
More informationModel descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified.
More informationPRESSURES TO 740 PSIG (51 BARG) TEMPERATURES TO 800 F (427 C) MODELS. 300Y Series Ordering Code. Add l Inlet Size Model Body Dash Perf Mesh Require-
APPLICATIONS Steam, liquid, gas and oil service Power industry Pulp and paper Chemical industry Process Equipment Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
More informationPalanca manual Lifting device. Obturador o-ring Disc o-ring 28 Soft seat Viton / PTFE Metal. Inlet Outlet Orifice Area A B C Weight
Model 1216F TECHNICAL DATA SHEET Description Requirements Type Safety and Relief valve Calculation EN-4126-1 / 7 Connections Threaded BSP / NPT Design EN-12516-1, EN-4126-1 / 7 Rating PN-40 DIN 259 and
More informationAnderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
More informationPRESSURES TO 285 PSIG (19.7 BARG) TEMPERATURES TO 750 F (390 C) MODELS. 150Y Series Ordering Code
APPLICATIONS Steam, liquid, gas and oil service Power Industry Pulp & Paper Process Equipment Chemical Industry Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
More informationType 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationTable of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.
Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3
More informationSAFE - ANSI. Angle pattern safety valve 1 to 6 (DN 25 to 150) Safety valves ARI-SAFE-ANSI
SAFE - ANSI Safety valves Angle pattern safety valve 1 to 6 (DN 25 to 150) ARI-SAFE-ANSI ASME Code Section VIII-Division 1. UV-stamp NB-stamp Type-test approved acc. to TRD and AD2000-A2 Direct loaded
More informationSeries Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationKunkle Safety and Relief Products. Series 6000
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
More informationSAMPLE CYLINDERS. Sample Cylinders & Accessories. Spun End Cylinders. Ultra-Seal Constant Pressure Cylinders. VP Series Cylinder Valves
SAMPLE CYLINDERS T H E S O L U T I O N F O R G A S S A M P L E S T O R A G E Sample Cylinders & Accessories ISO 9001:2008 Certified Quality System Spun End Cylinders Ultra-Seal Constant Pressure Cylinders
More informationSeries Safety Valves for ASME Section I and VIII Boiler Applications 1005C
Series 4200 Safety Valves for ASME Section I and VIII Boiler Applications 1005C Table of Contents Introduction & Warranty...IFC Numbering System & Ordering Information...1 Features & Benefits...2 Bill
More information5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Adjustable, live-loaded graphite packing API 98 inspection and testing
More informationSeries Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
More informationCHARACTERISTICS ACCESSORIES. High Efficiency Pilot Operated Safety Valves
Technical High Efficiency Pilot Operated Safety Valves are derived from the conventional valves of the same series, and retain the same orifices. They are designed and manufactured in according to the
More informationWafer Silent Check Valves
Applications Liquid Service Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Chemical Industry Oil & Gas Wafer Silent Check Valves Pressures to 740 PSIG Temperatures to
More informationNELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
More informationSpring Loaded Safety Valve. SiC 11/13/14
Spring Loaded Safety Valve SiC 11/13/14 General Features and Benefits Acc. Directive 97/23/EC of the European Parliament and the Council of 29 May 1997 on the approximation of the laws of the Member States
More informationCompact. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
More informationCROSBY J-SERIES DIRECT SPRING PRESSURE RELIEF VALVES
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design FEATURES ASME/NB certified capacities for
More informationSeries Pilot Operated Pressure Relief Valves 0810C
Series 00 Pilot Operated Pressure Relief Valves 00C Numbering System To simplify the selection and specifying of Farris pressure relief valves, use the following type numbering system. The type numbering
More information21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
More informationFabricated Duplex Strainers
Applications Chemical Industry Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Oil & Gas Fabricated Duplex Strainers Pressures to 1480 PSIG Temperatures to 800ºF FEATURES
More information0810C. Valve Group Series. Farris Engineering Pressure Relief Valves
0810C Valve Group 3800 Series Farris Engineering Pressure Relief Valves Table of Contents Selection Table Matrix...1 Principles of Operation... 2-3 Numbering System... 4-5 Features/Bill of Materials Main
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05i-Npt Stainless Steel Inline High Pressure Relief
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationPRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS. safety and relief valve catalog
PRESSURE RELIEF VALVES AND ACCESSORIES FOR A WIDE RANGE OF COMMERCIAL AND INDUSTRIAL APPLICATIONS safety and relief valve catalog Table of Contents PRODUCTS Valve Selection Guide.......................................................................
More information5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection
More informationReyco Series RL14, RL40, & RL41. Direct Spring Acting Safety Relief Valves for Gas, Liquid, and Steam Service
Reyco Series RL14, RL40, & RL41 Direct Spring Acting Safety Relief Valves for Gas, Liquid, and Steam Service Reyco Series RL Direct Spring Acting Safety Relief Valves for Gas, Liquid, and Steam Service
More informationCompact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT
Compact Electric Actuated 3-Way Ball Valves T-Port, 316 Stainless Steel, Full Port 1/4 to 3/4 NPT Features Industrial quality miniature actuator Full Port direct mount 3-way stainless steel ball valve
More informationSafety and Relief Valves for Industrial and Commercial Applications.
Safety and Relief Valves for Industrial and Commercial Applications. Kunkle Safety and Relief Valve Products Overview Kunkle Safety and Relief Valve Products Overview Contents Models 1 and 2 Brass Safety
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More information21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
More information