SMPS Capacitors Chip Assemblies
|
|
|
- Grant Perkins
- 5 years ago
- Views:
Transcription
1 MP Capacitors CH/CV - Radial, Dual-in-ine, 4 Terminal/MT J & Ranges The CH/CV range exhibits low ER/E making them well suited for high frequency applications. ith its PME technology, the range exhibits high current handling capabilities where as other technologies may not, making them the ideal choice for filtering, smoothing and decoupling circuit applications. The CH/CV range uses a number of different lead frames types which reduces the thermo-mechanical stresses which makes them the designer s choice for high reliability applications. In combination with this the range uses a stacked capacitor design which saves on PCB space. FEATURE B9100 approved Voltage range V DC Dielectrics 1B/COG and 2C1/X7R Customised ceramic capacitor packages and lead frames available. Note: AVX does not recommend or advise the use of adhesives to secure the CH/CV components to the PCB EECTRICA PECIFICATION Temperature Coefficient CECC , (4.24.1) 1B/C0G: A Temperature Coefficient - 0 ± 30 ppm/ºc, -55º to +125ºC 2C1/X7R: C Temperature Characteristic - ± 15%, -55º to +125ºC Capacitance Test 25ºC 1B/C0G: Measured at 1 VRM at 1KHz (1MHz for 100 pf or less) 2C1/X7R: Measured at 1 VRM at 1KHz Dissipation Factor 25 C 1B/C0G: 0.15% at 1KHz, 1 VRM (1MHz for 100 pf or less) 2C1/X7R: 2.5% at 1KHz, 1 VRM Insulation Resistance 25 C 1B/C0G & 2C1/X7R: 100K megohms or 1000 megohms-μf, whichever is less Dielectric ithstanding Voltage 25 C (Flash Test) 1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 ma charging current. (500 Volt 150% rated voltage) ife Test (1000 hrs) CECC (4.23) 1B/C0G & 2C1/X7R: 200% rated voltage at +125ºC. (500 Volt 120% rated voltage) Damp Heat IEC , 56 days. Thermal hock IEC ºC to +125ºC, 5 cycles Resistance to older Heat IEC Vibration IEC Hz Hz, 0.75mm or 98m/sec 2, 6 hrs. Bump IEC m/sec 2, 4000 bumps MARKING CH and CV 4x, 5x, A5C 225K xxxxxx Top line A (AVX). Voltage code, dielectric code. Middle line capacitance code, tolerance code. Bottom line 6 digit batch code. Other CH, CV s AVX 5C 156M xxxxxx Top line AVX. econd line voltage code, dielectric code. Third line capacitance code, tolerance code. Bottom line, 6 digit batch code. Performance of MP capacitors can be simulated by downloading picalci software program - Custom values, ratings and configurations are also available. MAY
2 MP Capacitors (CV ) VERTICAY MOUNTED RADIA PRODUCT Part Number format (CVxxxxxxxxxxxA2) Typical Part Number CV525C106MA30A2 H Max. T Max. Max. H ead Dia CV (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) CV (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) CV (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) CV (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) CV (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) *Tolerance ± 0.8 ead Dia. ee Table 25 (0.984) ±3 (0.118) ±0.5 CV41/51/61/71/ (0.150) CV42/52/62/72/ (0.291) CV43/53/63/73/ (0.437) CV44/54/64/74/ (0.583) VERTICAY MOUNTED 4 TERMINA RADIA PRODUCT Part Number format (CVxxxxxxxxx3xx4) Typical Part Number CV435C106MA30A4 M1 T Max. H Max. M1 = M2 ± (0.984) ±3 (0.118) ead Dia. ee Table M2 Max. H ead Dia CV (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) CV (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) CV (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) CV (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) CV (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) 1 1 ±0.5 1 ±0.5 CV43/53/63/73/ (0.437) 5.08 (0.200) CV44/54/64/74/ (0.583) 7.62 (0.300) Note 1. This style is only available in 3 & 4 chip assemblies HO TO ORDER CV 52 5 C 106 M A 3 0 A 2 ize Voltage Dielectric Capacitance Capacitance pecification Finish ead Dia. ead pace ead Code Code Code Code Code Tolerance Code Code Code Code Code (see product section) 5 = 50V A = C0G (2 significant C0G: J = ±5% A = Non-customized 3 = Uncoated 0 = tandard A = tandard 2 = 2 Terminal 1 = 100V C = X7R digits + no. K = ±10% 8 = Coated 4 = 4 Terminal 2 = 200V of zeros) M = ±20% (classified as ee Note 1 7 = 500V eg. 105 = 1 μf X7R: K = ±10% uninsulated) above 106 = 10 μf M = ±20% 107 = 100 μf P = +100, -0% Not RoH Compliant Note: ee page 142 for How to Order B9100 parts 42 MAY 2015
3 MP Capacitors (CH ) HORIZONTAY MOUNTED 4 TERMINA RADIA PRODUCT Part Number format (CHxxxxxxxxx3xx4) Typical Part Number CH782C106MA30A4 M1 M2 25 (0.984) ±3 (0.118) ead dia (see table) ead Dia 1 CH (0.417) 8.7 (0.342) 8.2 (0.322) 0.7 (0.028) 5.08 (0.200) CH (0.468) 10.7 (0.421) 10.2 (0.400) 0.9 (0.035) 7.62 (0.300) CH (0.649) 13.6 (0.535) 15.2 (0.600) 0.9 (0.035) 7.62 (0.300) CH (0.700) 21.6 (0.850) 15.2 (0.600) 0.9 (0.035) 15.2 (0.600) CH (0.893) 16.6 (0.653) 21.2* (0.834) 0.9 (0.035) 10.2 (0.400) CH (0.555) 38.2 (1.503) 10.2 (0.400) 0.9 (0.035) 27.9 (1.100) CH (0.700) 38.2 (1.503) 15.2 (0.600) 1.0 (0.039) 27.9 (1.100) CH (0.944) 40.6 (1.598) 21.2* (0.834) 1.2 (0.047) 30.5 (1.200) *Tolerance ± 0.8 NOTE: This style is only available in 2, 3 & 4 chip assemblies only 1 ± 0.5 ± 0.5 M1 = M2 ± 0.5 CH42/52/62/72/77/87/ (0.291) CH43/53/63/73/78/88/ (0.437) CH44/54/64/74/79/89/ (0.583) HORIZONTAY MOUNTED DUA-IN-INE PRODUCT Part Number format (CHxxxxxxxxxx0A0) Typical Part Number CH615C106MA30A0 T (0.100) ± 0.05 (0.002) 2.0 (0.079) 13 ± (0.512) 1 (0.039) 1 ± 0.5 ead width 0.5 ead thickness (0.010) 1 = 2 ± 0.5 No. of eads per side CH (0.362) 8.7 (0.342) 8.2 (0.322) 3 CH (0.421) 10.7 (0.421) 10.2 (0.400) 4 CH (0.586) 13.6 (0.535) 14.0 (0.551) 5 CH (0.661) 21.6 (0.850) 15.2 (0.600) 7 CH (0.850) 16.6 (0.653) 20.3* (0.800) 6 CH (0.472) 38.2 (1.503) 10.2 (0.400) 14 CH (0.744) 38.2 (1.503) 15.2 (0.600) 14 CH (0.944) 40.6 (1.598) 20.3* (0.800) 14 CH41/51/61/71/76/81/86/ (0.150) CH42/52/62/72/77/82/87/ (0.291) CH43/53/63/73/78/83/88/ (0.437) CH44/54/64/74/79/84/89/ (0.583) HO TO ORDER CH 52 5 C 106 M A 3 0 A 0 ize Voltage Dielectric Capacitance Capacitance pecification Finish ead Dia. ead pace ead Code Code Code Code Code Tolerance Code Code Code Code Code (see product section) 5 = 50V A = C0G (2 significant C0G: J = ±5% A = Non-customized 3 = Uncoated 0 = tandard A = tandard 0 = traight dual 1 = 100V C = X7R digits + no. K = ±10% 8 = Coated in line 2 = 200V of zeros) M = ±20% (classified as 4 = 4 Terminal 7 = 500V eg. 105 = 1 μf X7R: K = ±10% uninsulated) 106 = 10 μf M = ±20% 107 = 100 μf P = +100, -0% Not RoH Compliant Note: ee page 142 for How to Order B9100 parts MAY
4 MP Capacitors (CH ) HORIZONTAY MOUNTED EAD MT PRODUCT Part Number format (CHxxxxxxxxxx0A7) Typical Part Number CH411C275KA30A (0.1) ± 0.5 (0.02) ± 0.5 (0.02) 2.54 (0.1) ± 0.5 (0.02) No. of eads per side CH (0.362) 8.7 (0.342) 8.2 (0.322) 3 CH (0.421) 10.7 (0.421) 10.2 (0.400) 4 CH (0.586) 13.6 (0.535) 14.0 (0.551) 5 CH (0.661) 21.6 (0.850) 15.2 (0.600) 7 CH (0.850) 16.6 (0.653) 20.3* (0.800) 6 CH (0.472) 38.2 (1.503) 10.2 (0.400) 14 CH (0.744) 38.2 (1.503) 15.2 (0.600) 14 CH (0.944) 40.6 (1.598) 20.3* (0.800) NOTE: A lead low profile version (CH...0A5) is available with lead height 1.1 (0.043). for single chip assemblies eg. CH415C225MA30A5 ead width 0.5 ead thickness (0.010) 1 = 2 ± 0.5 CH41/51/61/71/76/81/86/ (0.150) CH42/52/62/72/77/82/87/ (0.291) CH43/53/63/73/78/83/88/ (0.437) CH44/54/64/74/79/84/89/ (0.583) HORIZONTAY MOUNTED J EAD MT PRODUCT Part Number format (CHxxxxxxxxxx0A8) Typical Part Number CH411C275KA30A8 2 1 ead width 0.5 ead thickness (0.010) 1 = 2 ± (0.100) ± 0.5 ± 0.5 NOTE: A J lead low profile version (CH...0A3) is available with lead height 1.1 (0.043). for single chip assemblies eg. CH515C475MA30A (0.100) ± 0.5 No. of eads per side CH (0.362) 8.7 (0.342) 8.2 (0.322) 3 CH (0.421) 10.7 (0.421) 10.2 (0.400) 4 CH (0.586) 13.6 (0.535) 14.0 (0.551) 5 CH (0.661) 21.6 (0.850) 15.2 (0.600) 7 CH (0.850) 16.6 (0.653) 20.3* (0.800) 6 CH (0.472) 38.2 (1.503) 10.2 (0.400) 14 CH (0.744) 38.2 (1.503) 15.2 (0.600) 14 CH (0.944) 40.6 (1.598) 20.3* (0.800) 14 CH41/51/61/71/76/81/86/ (0.150) CH42/52/62/72/77/82/87/ (0.291) CH43/53/63/73/78/83/88/ (0.437) CH44/54/64/74/79/84/89/ (0.583) HO TO ORDER CH 52 5 C 106 M A 3 0 A 7 ize Voltage Dielectric Capacitance Capacitance pecification Finish ead Dia. ead pace ead Code Code Code Code Code Tolerance Code Code Code Code Code (see product section) 5 = 50V A = C0G (2 significant C0G: J = ±5% A = Non-customized 3 = Uncoated 0 = tandard A = tandard 3 = ow profile J 8 = Coated 1 = 100V C = X7R digits + no. K = ±10% (single chip) (classified as 2 = 200V of zeros) M = ±20% uninsulated) 5 = ow profile 7 = 500V eg. 105 = 1 μf X7R: K = ±10% (single chip) 106 = 10 μf M = ±20% 7 = Dual in line 107 = 100 μf P = +100, -0% 8 = J Dual in line Note: ee page 142 for How to Order B9100 parts Not RoH Compliant 44 MAY 2015
5 MP Capacitors (CH/CV ) C0G DIEECTRIC UTRA TABE CERAMIC CH/CV41-44 CH/CV51-54 CH/CV61-64 CH/CV71-74 CH/CV76-79 CH81-84 CH86-89 CH91-94 s s s s s s s s Voltage DC Cap μf NB Figures in cells refer to size within ordering information MAY
6 MP Capacitors (CH/CV ) X7R DIEECTRIC TABE CERAMIC CH/CV41-44 CH/CV51-54 CH/CV61-64 CH/CV71-74 CH/CV76-79 CH81-84 CH86-89 CH91-94 s s s s s s s s Voltage DC Cap μf NB Figures in cells refer to size within ordering information 46 MAY 2015
SWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
EUROPEAN SIZES SMPS STACKED CAPACITORS
EUROPEAN SIZES SMPS STACKED X7R AND NPO STACKED CAP DIMENSIONS 0.25 ± 0.050 (0.010 ±.002) All Measurements Millimeters (inches) 6.35 (0.250) Min. 0.25 ± 0.050 (0.010 ±.002) 2.54 (0.100) Max. 0.64 (0.025)
Miniature Aluminum Electrolytic Ca pac i tors
ULTRA LOW IMPEDANCE, RADIAL LEADS, POLARIZED, ALUMINUM ELEC TRO LYT IC FEATURES VERY LOW IMPEDANCE LONG LIFE AT 105 C (1000 ~ 5000 hrs.) HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR SWITCHING POWER SUPPLIES
Radial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case
MM Series MLCC for Medical Applications
MM Series MLCC for Medical Applications General Specifications The AVX MM series is a multi-layer ceramic capacitor designed for use in medical applications other than implantable/life support. These components
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
CASE DIMENSIONS: millimeters (inches) Code H, K, L, O, S, T, X CASE 156 J XXXXX 156 = 15µF ID Code HO TO ORDER TCN L 157 FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode
Cylindrical Types, High-Voltage Mica Capacitors Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits
Types 291, 292, 293, 294 Cylindrical Case, High-Current and High-Voltage Circuits Designed for frequencies ranging from 100 khz to 3 MHz, Mica Capacitor Types 291, 292, 293 and 294 are well suited for
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded
Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
AVX European Space Agency and CECC Surface Mount Ceramic Capacitor Products. European Space. Version
AVX European Space Agency and CECC Surface Mount Ceramic Capacitor Products European Space www.avx.com Version 8.1 Table of Contents AVAILABLE TYPES................................................ 2 AVAILABLE
General Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES
FEATURES Highest CV/cc in broad range of low profiles Conductive polymer electrode Benign failure mode under recommended use conditions Lower Undertab terminations layout: - High Volumetric Efficiency
Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
SM20 N 472 J 501 B M. Capacitance Tolerance J = ±5% K = ±10% M = ±20%
KPS HV, Large Case, SM Series, C0G Dielectric, 500 10,000 VDC (Industrial Grade) Overview KPS HV (KEMET Power Solutions, High Voltage), Large Case ( 1515), SM Series capacitors in C0G dielectric are designed
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
Snap-in Type Aluminium Electrolytic Capacitors
Endurance: 85 2000hours Recommended Applications : Applying to switching power supply and other industry/ commercial field Corresponding product to RoHS SPECIFICATIONS Item Category Temperature Range -40~+85
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working
handbook, halfpage 059 PLL-SI 200 V, 250 V, 400 V, 450 V Category temperature range 25 to +105 C Endurance test at 105 C
FEATURES Polarized aluminium electrolytic capacitors, non-solid arge types, very small dimensions, cylindrical aluminium case, insulated with a blue sleeve Pressure relief on the top of the aluminium case
Polyester Capacitors Filmite E, ORANGE DROP, Radial Lead
Polyester Capacitors Filmite E, ORANGE DROP, Radial ead PERFORMANCE CHARACTERITIC Operating Temperature: - 55 C to + 85 C To + 105 C when working voltage is reduced to 70 % of + 85 C rating; to + 125 C
Medium Power Film Capacitors
The FLA series uses metallized polypropylene dielectric, aluminum can, impregnated with soft PU specially treated to have a very high dielectric strength in operating conditions up to 85 C. The FLA has
Snap-in Type Aluminium Electrolytic Capacitors
Endurance:105 3000 hours Recommended Applications : Smoothing circuit, TV/Monitor,Adapter, SMPS Corresponding product to RoHS Long Life LG SPECIFICATIONS Item Category Temperature Range Range Rated acitance
General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: μF / V
General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V LEAD-FREE COMPATIBLE COMPONENT SnPb termination option is not RoHS compliant.
Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard DCL reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130
TMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
STANDARD CASE DIMENSIONS: millimeters (inches) W 1 dimension applies to the termination width for A dimensional area only.
L W FEATURES Non-burn safe technology Reliability level: 0.5%/1000 hours at 85ºC 13 case sizes available, standard and low profile Environmentally friendly, RoHS Compliant CV range: 2.2-1000μF / 1.8-10V
CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors
CCDSeries Safety Standard Recognized Ceramic s Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s)
Surface-Mounted Ceramic EMI Filter Capacitors
X2Y S Surface-Mounted Ceramic EMI Filter Capacitors Feb, 2008 Rev.14 1 DESCRIPTION Yageo s X2Y series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD
Type SLP 105 C Snap-In Aluminum Electrolytic Best Value 105 C Snap-In Type
Type SLP is the best value package snap-in series for 05 ºC, 3000 h operation. This series is the most cost-effective choice for DC filtering and power supply applications where high temperature, long
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
W+0.2 (0.008) H+0.2 (0.008) L±0.2 (0.008) Tolerance K=±10% M=±20%
The TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation
For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k
T-UP Series 85 C, 3000 hours 4 or 5 terminal mounting provides stability and keyed polarity Extended CV ratings Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature: Nominal
General Performance Characteristics HIGH TEMPERATURE CERAMIC CAPACITORS
F-3106F 2/08 Index General Performance Characteristics..............................................................3-6 HIGH TEMPERATURE CERAMIC CAPACITORS HT/HP - Standard Series - (+200 C) Ceramic acitors
55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
FEATURES APPLICATIONS. High power DC/DC general applications MULTIANODE CONSTRUCTION
Tantalum Ultra Low Capacitor FEATURES Multi-anode construction Super low CV range: 10-2200μF / 2.5-50V 5 case sizes available Mirror multi-anode construction used with D, Y case capacitors reduces ESL
Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc
TPS surface mount products have inherently low ESR (equivalent series resistance) and are capable of higher ripple current handling, producing lower ripple voltages, less power and heat dissipation than
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
SM20 B 153 K 501 B M. Capacitance Tolerance K = ±10% M = ±20%
KPS HV, Large Case, SM Series, X7R Dielectric, 500 10,000 VDC (Industrial Grade) Overview KPS HV (KEMET Power Solutions, High Voltage), Large Case ( 1515), SM Series capacitors in X7R dielectric are designed
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
Voltage B = 50 C = 100. Temperature Characteristic
MIL-PRF-123 HOW TO ORDER Military Type Designation: Capacitors, Fixed, Ceramic Dielectric, (Temperature Stable and General Purpose), High Reliability M123 A 01 BX B 103 K C Mil-Spec Number Modification
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. High frequency,low impedance. Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc.
S YD286 Series High frequency,low edance 105, 2000 hours Wide Temperature, Long life For Switching power supply,ip-board,adaptor,etc. Specifications: Item Characteristics Rated Voltage Range: 6.3V ~100VDC
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes
FEATURES Compliant to the RoHS2 directive 2011/65/EU SMD J-lead Low profile case sizes APPLICATIONS Handheld electronics USB accessories LEAD-FREE COMPATI- BLE COMPONENT CASE DIMENSIONS: millimeters (inches)
Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
High Voltage PolyTerm Ceramic Capacitors
High PolyTerm Ceramic Capacitors Standard MLCCs are prone to cracking due to mishandling, depanelization, and board flexing. In response to customer requests for higher resistance to mechanical stress,
1.0" Min. L.S..762/.030. Styles SR15, SR20, SR30, SR40, SR50
Radial Leads/SkyCap GENERAL INFORMATION AVX SR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, Z5U 200, 100, 50 Volts (300V, 400V & 500V also available) Case Material:
CASE DIMENSIONS: millimeters (inches)
L A S A W 1 MARKING A, B, C, D, E, U CASE Polarity Band (Anode+) AVX LOGO 227 A XXXXX H W Value in pf 227 = 220μF Rated Voltage A = 10V ID CASE DIMENSIONS: millimeters (inches) The TBJ COTS-Plus SRC9000
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial ead Type Series : FC Type : A Features : 105 C h to 5000 h ow impedance RoHS compliant Specifications Category temperature range 55 C to +105 C Rated voltage range 6.3 V.DC to 100 V.DC Capacitance
Advanced Power Electronics Corp.
300mA Low Dropout Linear Regulator with Shutdown Description The is a low dropout, positive linear regu lator with very low quiescent current. The can supply 300mA output current with low dropout voltage
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
Accu-P. Thin-Film Technology THE IDEAL CAPACITOR THIN-FILM TECHNOLOGY
Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts inductance to the capacitor and dielectric and metal
TANTALUM MOLDED / RADIAL T330/T340 SERIES - PRECISION MOLDED RADIAL LEAD POLAR TYPE
330/340 ERIE - PRECIION MOE RAIA EA POAR YPE 330 eries KEME 330 eries, polar-type, radial lead rectangular Precision Molded antalum (PM) capacitors are primarily designed for applications that demand full
Thin-Film RF/Microwave Capacitor Technology. Accu-P
Thin-Film RF/Microwave Capacitor Technology Accu-P 5 Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts
General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: μF / V
General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V LEAD-FREE COMPATIBLE COMPONENT For part marking see page 130 CASE DIMENSIONS:
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING VERY LOW IMPEDANCE & HIGH RIPPLE CURRENT AT 100KHz SUITABLE FOR DC-DC CONVERTER, DC-AC INVERTER, ETC. NEW EXPANDED CV RANGE, UP TO 6800μF NEW
FEATURES APPLICATIONS. General low power DC/DC and LDO
FEATURES General purpose SMT chip tantalum series 7 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V APPLICATIONS General low power DC/DC and LDO LEAD-FREE COMPATIBLE
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply
R82. p = 5mm. MKT Series R 8 2 C -
Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B
Surface Mount Multilayer Varistors
ESD Protection (ES) Series Fast Response < 0.5 ns Low Working 5 V Low Capacitance Low Leakage Current < 1 μa Low Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Working (Max) (Max) Leakage
Contents CORNELL DUBILIER
Contents Products Listed by Type Designation........................................................ Chip and SMT Selector Guide................................................................... 1.001
EV/HEV/PHEV MLCC Application Spotlight
EV/HEV/PHEV MLCC Application Spotlight AC/DC Plug-in Introduction M Door Mirror AC/DC LED/HID Head Lamp Engine Control unit ABS EPS Transmission Motor Alternator 12V AC/DC M Wiper M Air Blower M Seat Buck
Aluminum Electrolytic Capacitor JNK
FEATES Extended Lifetime at High ripple current High Professional Switch Mode Power Supplies Frequency Converters SPECIFICATIONS Items Performance Characteristics Operating Temperature Range ( ) -40 ~
Rated DC Voltage 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V 020 = 20V 025 = 25V 035 = 35V 050 = 50V
FEATURES Improved reliability 2x standard reduced by 25% to 0.0075 CV Robust against higher thermo-mechanical stresses during assembly process CV range: 0.10-680μF / 4-50V 6 case sizes available 130 low
Standard and Low Profile Tantalum Microchip Capacitors. STANDARD CASE DIMENSIONS: millimeters (inches)
FEATURES The world s smallest surface mount tantalum capacitor CV range: 0.10-150μF / 2-25V 11 case sizes available, standard and low profile APPLICATIONS Hearing Aids, Non-life support medical, Long life
Series AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
Thank you for visiting our new Consumer/Gaming Capacitance Solution page.
Thank you for visiting our new Consumer/Gaming Capacitance Solution page. This site is currently under construction - in the interim you will find the following KEMET product data sheets that may be of
LPH Large Capacitance Aluminum Electrolytic Capacitors
Series LPH 105 C, Miniaturized, High-Reliability, High-Ripple Capacitors ULTRAMINI, HIGH RELIABLILITY TYPE Smaller-sized and higher-ripple than L3J. Guaranteed for 2000 hours at 105 C. Outline Drawing
W2A (0508) Capacitor Arrays. 4 pcs 0402 Capacitors = 1 pc 0508 Array. 2.1 (0.083) AREA = 3.95mm2 (0.156 in2)
apacitor rray apacitor rray (I) NFI OF UING IOR RRY V capacitor arrays offer designers the opportunity to lower placement costs, increase assembly line output through lower component count per board and
Multi Layer Ceramic Capacitor
Features: : A wide selection of sizes is available (0201 to 0603 sizes) High capacitance in given case size Capacitor with lead-free termination (pure Tin) Applications: For general digital circuit For
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
C Series, CKC Series Commercial Grade Soft Termination
C Series, CKC Series Commercial Grade Soft Termination Type: Issue date: Jan 2014 C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4520 [EIA CC1808] C4532 [EIA CC1812] C5750
Series AM1D-Z 1 Watt DC-DC Converter
FEATURES: RoHS compliant High efficiency up to 80% Low profile plastic package 7 pin SIP package Operating temperature -40 o C to + 85 o C Short circuit protection Pin compatible with multiple manufacturers
深圳市骏达电子有限公司 电话 : 传真 :
General purpose SMT chip tantalum series 6 case sizes available Low profile options available CV range: 0.10-2200μF / 2.5-50V For part marking see page 130 HOW TO ORDER TAJ C 106 Type TECHNICAL SPECIFICATIONS
ALS40. ALS41 Stud Mounting
31 This range offers high CV per unit volume coupled with high ripple currents and long life performance at 105 C. They are also capable of handling high peak voltages and currents. Capacitance range...
ALS30. ALS31 Stud Mounting
25 This range offers high CV per unit volume coupled with high ripple currents and long life performance. They are also capable of handling high peak voltages and currents. Capacitance range... 68µF to
tan δ (120 Hz/+20 C) Add 0.02 per 1000 µf for products of 1000 µf or more. F±0.5 L<16 :L±1.5 L>20 :L±2.0
Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Se ries) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C RoHS directive compliant
FEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20%
FEATURES High Volumetric Efficiency 3x reflow 260 C compatible 14 case sizes available including low profile codes Environmentally friendly Consumer applications (e.g. mobiles phones, PDA etc.) CV range:
General purpose SMT chip tantalum series 5 case sizes available CV range: μF / V
FEATURES General purpose SMT chip tantalum series 5 case sizes available CV range: 0.22-680μF / 6.3-50V LEAD-FREE COMPATIBLE COMPONENT MARKING A, B, C, D, E CASE Polarity Band (Anode+) AVX LOGO 227 A XXXXX
CGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
Summary of Specifications
Series Snap Mount Large High CV High Ripple RoHS Compliant 85 C Maximum Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life
FEATURES APPLICATIONS. Audio Systems GPS Seat Controls Dashboard
FEATURES General purpose SMT chip tantalum series 6 case sizes available CV range: 0.22-680μF / 6.3-50V APPLICATIONS Audio Systems GPS Seat Controls Dashboard LEAD-FREE COMPATI- BLE COMPONENT MARKING A,
FEATURES APPLICATIONS. Mobile phones MP3/4 players. R (0.081) 1.30 (0.051) 1.20 (0.047) max. Tolerance M = ±20%
FEATURES High Volumetric Efficiency 3x reflow 260 C compatible 14 case sizes available including low profile codes Environmentally friendly Consumer applications (e.g. mobiles phones, PDA etc.) CV range:
OxiCap NOS Low ESR Series
OxiCap NOS Low Series A, B, C, D, E, V, W, X, Y CASE Polarity Band (Anode+) L A S A W 1 MARKING OxiCap LOGO 227 G XXXXX H Capacitance Value in pf 227 = 220µF Rated Voltage G = 4V ID Code W CASE DIMENSIONS:
Soft Termination Capacitor ~ GCJ series ~
GENERAL DESCRIPTION Requirements especially enhanced mechanical strength from the automotive customers to us are increasing. It was noted that many components may be subject to severe flexing,vibration,and
MSB Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor run applications. Low power switching applications. Low pulse operation
1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
Automotive Grade Accu-P
Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts inductance to the capacitor and dielectric and metal
FEATURES Low ESR series of robust Mn0 2 solid electrolyte capacitors CV range: μF / V 5 case sizes available Power supply applications
Low - Automotive Product Range FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.22-680μF / 6.3-50V 5 case sizes available Power supply applications APPLICATIONS Power Supply