Table of Contents. Morrison

Transcription

1 Table of Contents Introduction Knoll and Sustainable Design 3 Introduction 4 System Finishes 5 Knoll Color Program 6 System Legacy Finishes 8 Panel Planning Panels 10 Doors 42 Windows 44 Markerboard and combination add-on panels 46 Upholstered add-on panels 47 Upholstered Options add-on panels 48 Veneer and combination add-on panels 49 Add-on connectors, post assemblies 50 Connectors, post assemblies 54 High-low connectors 60 High-low post assemblies 62 Panel accessories 68 Trim covers for reconfiguration 70 Access 72 Currents trim for 78 Top cap and raceway cover kits 79 High-low top caps 81 PDC and multiple outlet covers 82 Stackable add-up panels 83 Stackable add-up connectors and trim caps 86 Power distribution components 89 Power distribution 101 Worksurface Planning Worksurfaces, 1 3 /4 103 Conference worksurfaces, 1 3 /4 110 Worksurfaces, 1 1 /4 111 Options worksurfaces, 1 1 /4 126 Currents worksurfaces for 137 Cascade edge worksurfaces 143 Universal and conference desk end panels 150 VDT corner and transitional end panels 151 Kneehole filler and transitional filler panels 152 Return and bridge filler panels 153 Brackets 154 Network Desk System 160 Power distribution components 166 Copyright 2011 Knoll, Inc. All rights reserved. All prices effective 7/15/ PLMORR0711

2 Storage Floorstanding pedestals 174 Double-width floorstanding pedestals and cabinets 175 Mobile pedestals 177 Pedestal accessories 178 Intermediate shelves 179 Aluminum shelf 180 Shelves and flush counter surfaces, 1 3 /4 181 Shelves and flush counter surfaces, 1 1 /4 183 overhead cabinets 185 Task lights for panel or wall mounted storage 186 Network overhead storage 187 Overhead Storage 190 Options overhead cabinets and shelves 191 Options 192 Reuter open shelf 194 Reuter open overhead 195 Reuter overhead cabinet 196 Reuter overhead storage 200 Reuter flat front overhead cabinet 202 Task Lights for Reuter Overhead Storage 203 Network privacy screens 204 Kiosk vertical storage 207 Accessories Accessories 208 Alpha-Numeric Index 209 Selling Policy 218 KnollKey Lock Program 220 General Ordering Information 221 2

3 Knoll and Sustainable Design Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted a scientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal, verifiable, sustainability standards for our industry. Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wide environmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the same high standards and that customers can trust a company s declaration about the environmental benefits of its products. Knoll third-party partners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC ); Rainforest Alliance; GREENGUARD Environmental Institute; and The Business and Institutional Furniture Manufacturer s Association (BIFMA) level certification from Scientific Certification Systems (SCS). In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educational institutions achieve Leadership in Energy and Environmental Design (LEED ) workplace certification. Global Climate Change Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement solutions to some of the world s most pressing challenges, including environmental change. Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes. Life Cycle Assessment (LCA) Tool Life Cycle Assessment is a science-based measurement of a product s environmental impacts throughout its life cycle, from raw materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation of sustainable practices. Knoll has partnered with The Green Standard.org to develop an affordable, universal ISO-compliant computer-based LCA tool that can be used by the entire contract furniture industry and is partnering on the development of an Environmental Product Declaration System (EPDs) for Knoll products. EPDs are verified documents containing LCA results and additional environmental performance information about a product. Setting Industry Standards Knoll partners with MTS (The Institue for Market Transformation to Sustainability) to develop the SMaRT Consensus Sustainable Products Standards, a set of consensus-based sustainable product standards based on the LEED model, for all building products, fabric, apparel, flooring and carpet. MTS, the developer of SMaRT, is an accredited American National Standards Institute (ANSI) standard developer. Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level sustainability standards for the contract furniture industry. Knoll has established FSC (Forest Stewardship Council) certified wood as the standard for general office open plan office systems, casegoods and tables. Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplus furniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner. Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead to sustainable products and practices. For more information about Knoll and sustainable design, visit knoll.com/environment. 3

4 Introduction This price list provides you with the product information you need to specify and order Knoll. is a completely integrated office system, capable of all types of office planning. may plan as a panel system, with panel mounted components, or as a freestanding desk system. can also be combined with the Currents service wall for superior wire management, cable access and off-module planning. Major components panels, worksurfaces and storage may be configured or reconfigured in all types of planning listed above. Information about is found in three companion books: this Price List, the Planning Guide and the Brochure. The Price List arranges components in a logical sequence. The first section includes all major components required for panel system planning: and Options panels, add-on panels, connectors, doors, Access, top cap kits, stackable add-up panels and power distribution. The second section includes those components required for worksurface planning and support: and Options worksurfaces, Currents worksurfaces for, desk panels, Network desk supports, brackets, and power components. The third section includes storage components for panel based or freestanding planning: pedestals, Intermediate shelves,, Options and Reuter overhead storage and lighting, screens, and vertical storage. The fourth section includes accessories. The complete range of computer support and accessories can be found in the KnollExtra price list. How to order is a component-based system. To ensure a complete order for a workstation or project, specify components in the same order as the price list. You will find that pattern numbers contain a logical, alphanumeric sequence describing the type, size, features, and finish of the component. To specify components, consult the ordering code examples and application notes provided. For example, to order a 1 3 /4 folkstone grey laminate worksurface with grommets, 48 W by24 D specify: MW2-S4824A114. Details follow: MW2 1 3 /4 worksurface S Straight 48 Width 24 Depth A With grommets 114 Folkstone Grey laminate For further assistance with ordering or specifying, consult your Knoll representative or Knoll dealer. Please note that pattern numbers beginning with the letter A- are Currents pattern numbers and patterns beginning with the letter R- are Reuter storage pattern numbers. Note to Knoll Dealer Sellers: The products contained in this price list are also available through the Knoll Essentials program, with limited exceptions. For additional information, please contact your customer service representative or visit Knoll Exchange. 4

5 System Finishes KnollTextiles KNOLLTEXTILES Approved for vertical panels and privacy screens. Fabric Group 10 Annex (W1360) Bailey II (W359) Broadcloth (W288) Element (W1077) Foundation (W351) Growth Spurt (W692) Solid Crepe (W257) Symbolic Details (W693) Tailor Made (W133) Versatility (W432) Fabric Group 15 Regency/Fairfield (W210/B) Fabric Group 20 Banyan (W443) Bauhaus Block (W296) Circle Line (W1146) Clarity (W281) Criss Cross (W305) Devon (W809) Logic (W1318) Melbourne (W228) Nematic (W1292) panel and trim only Outback (W229) Photon (W1293) Reflect (W884) Resolution (W280) Walkabout (W230) Weave Three (W298) Fabric Group 30 Basket Draft (W249) Flow (W565) Harmony (W232) Interknit (W1090) Match Point (W1145) Micro (W465) Progression (W403) Relay (W1020) Fabric Group 40 Amplify (W1215) Analogy (K614) Bandwidth (W1219) Clarkson (W1218) panel and trim only Foil Rap (W535) Hard Rock (W1007) Metaphor (K612) Ornament (W1078) Palladium (W1030) Fabric Group 45 Backdrop (W302) * Dristi (K872) with backing only Fast Forward (W301)* *Not available for upholstered connector trim covers Fabric Group 50 Knoll Hopsack (K1206) Presto (K1000) Ricochet (K498) Fabric Group 55 Transition (W816) Ported panels can only be upholstered with textiles approved for application on Reff panels. Customer s Own Material is subject to an application testing fee of per fabric and a fee for UL testing. Fabric requirements - application test, 10 yards; UL test, 15 yards. COM is also subject to extended leadtimes. COM panels are priced at Group 10 plus cost of fabric. 5

6 Knoll Color Program System Finishes Core paint and laminate finishes Specify Core finishes for all new customers Core Legacy Top caps and trim, Panels (veneer only) Glazed panel, window, door frames (textured) Desk panels, storage fronts Hinged doors Desk supports, stanchion, storage, brackets, raceway covers Worksurfaces and shelves (all) Worksurfaces and shelves (postformed) Cascade Edge worksurfaces Pedestals 611 Beige Mist Metallic P2 P2 118 Bright White P3 P3 112 Brown P1 P1 113 Dark Grey Y3 P1 P1 114 Folkstone Grey LA P1 P1 111 Jet Black P1 P1 115 Medium Grey Y2 P1 P1 612 Medium Metallic Grey J P2 P2 119 Pumice F 116 Sandstone P1 P1 613 Silver 3 P3 P3 117 Soft Grey E/M42 P1 P1 128 Fog G 129 Micro Sand 121 Micro Grey 122 Brushed Sand 123 Brushed Grey 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Reuter Overhead This price list contains pricing for Core finishes. For detailed pricing of Legacy finishes, please refer to the latest release of CAP worksheet or contact your customer service representative. The new, Core P1 finishes in have the same list prices as P2. Additionally, Pedestals and Reuter overhead storage have a separate P3 price point for Silver and Bright White. The new Core finish 113 Dark Grey is not a match to the Legacy finish NV. It is a match to the Dividends Legacy finish Y3. The new Core finish 115 Medium Grey is not a match to the Legacy finish NJ. It is a match to the Dividends Legacy finish Y2. Patterned laminates (Micro, Brushed and Wood grain laminates) are available on postformed worksurfaces and shelves (straight, trapezoidal, VDT). Wood grain laminates are also available on Cascade Edge worksurfaces. 6

7 Knoll Color Program System Finishes Core Veneer Finishes V1 Techwood Closed Pore Y811 Natural (Legacy: T) Y821 Blond Maple (Legacy: 4/M/C6J2, Maple) Y831 Light Cherry (Legacy: 6/R/C6J3, Cherry) Y851 Black Oak Y316 Maple Y319 Cherry Y323 Medium Walnut Y326 Dark Mahogany Y327 Light Oak Y329 Medium Oak Y341 Wenge Y342 Medium Teak Y343 Dark Grey Oak Y344 Espresso V2 Natural Veneer Closed Pore V316 Maple (Legacy: K) V312 Bronzed Cherry V411 Light Walnut V415 Peacock Green Walnut V417 Old English Walnut V418 Smoked Walnut V421 Chalk Oak V423 Light Oak V425 Amber Oak V427 Brown Oak V433 Light Fawn Cherry V436 Medium Brown Cherry V439 Straight Anigre veneer finishes apply to top caps and trim, veneer and combination panels and add-on panels, hinged doors, worksurfaces, desk support panels, pedestal fronts, shelves, Network, Options and Flat Front Reuter overhead storage fronts. Please consult the individual price list pages for details on price and availability. In September 2008 all existing finishes were transferred from our East Greenville Plant to our Toronto plant. All existing finishes were changed to closed pore finishing and assigned new finish codes. This price list contains pricing for Core finishes. Core finishes include some existing finishes formally referred to as Techgrain (cross-referenced above) as well as numerous new veneer finishes now available on. For detailed pricing of Legacy finishes, please refer to the latest release of CAP worksheet or contact your customer service representative. 7

8 System Legacy Finishes Worksurfaces Panels Desk Panels Shelves Top caps/ Trim covers Glazed Panel/ Window/ Door Frames* Storage fronts Storage Cases Desk Supports, Stanchions, Steel shelves, brackets, raceway covers Plastic Laminates Light Grey L L Medium Grey G G Sand D D Pumice F F Snow B B Wood Grain Laminates Clear Maple (Currents for worksurfaces only) CM Veneer Group 1 Maple Techgrain 4/Y821 4/Y821 M/C6J2 4/Y821 4/Y821 M/C6J2 Cherry 6/Y831 6/Y831 R/C6J3 6/Y831 6/Y831 R/C6J3 Techgrain Medium brown 7/C6F3 7/C6F3 I/C6J4 7/C6F3 7/C6F3 I/C6J4 mahogany Techgrain Medium red 8/C6F4 8/C6F4 C/C6J5 8/C6F4 8/C6F4 C/C6J5 mahogany Techgrain American cherry 9/C6F5 9/C6F5 P/C6J6 9/C6F5 9/C6F5 P/C6J6 Techgrain Veneer Group 2 American cherry X/C6F6 X/C6F6 X/C6F6 X/C6F6 X/C6F6 X/C6F6 Medium red mahogany Z/C6F7 Z/C6F7 Z/C6F7 Z/C6F7 Z/C6F7 Z/C6F7 Paint Group 2 Metallic Flint Light metallic grey U U U U U U Medium metallic J J J J J J grey Dark metallic grey V V V V V V Light metallic tan W W W W W W Metallic beige H H H H H H Paint Group 3 Silver White B B B B B B * Paint finishes for glazed panels, window and door frames are textured only. Specify legacy finishes to match existing product only. Legacy finishes are not available for new customers. This price list contains pricing for Core finishes. For detailed pricing of Legacy finishes, please refer to the latest release of CAP worksheet or contact your customer service representative. In September 2008 all existing veneer finishes were transferred to our Toronto plant. All existing finishes were changed to closed pore finishing and assigned new finish codes. The older, semi-open pore finishes are no longer available and legacy finishes must be ordered with the newer finish codes beginning with C. As of February 2009 Legacy laminates will be priced 10% higher than Core laminates. 8

9 This page intentionally left blank

10 Panels 30 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 30 MP ( ) $354. $388. $400. $460. $533. $ /4 30 MP ( ) /4 30 MP ( ) /4 30 MP ( ) /4 30 MP ( ) /4 30 MP ( ) /4 30 MP ( ) ,029. 1,110. Options panels, upholstered both sides /4 30 MP N( ) /4 30 MP N( ) /4 30 MP N( ) /4 30 MP N( ) /4 30 MP N( ) /4 30 MP N( ) /4 30 MP N( ) ,019. Example: MP W210/20 MP2 Panel 30 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Fabric Groups can be found on page 5. Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g. 10/20) and upholstery pattern numbers. Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating. 10

11 Panels 30 H glazed description w d h pattern no. C/T Glazed panels /4 30 MP C/T-( ) $ /4 30 MP C/T-( ) /4 30 MP C/T-( ) /4 30 MP C/T-( ) 1, /4 30 MP C/T-( ) 1, /4 30 MP C/T-( ) 1,277. Panel Planning Example: MP T-613 MP2 Panel 30 Height 30 Width T Translucent acrylic glazing 613 Frame finish Specification Notes For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Frame finish 11 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

12 Panels 30 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 30 MP ( )-( ) $553. $569. $571. $604. $639. $ /4 30 MP ( )-( ) /4 30 MP ( )-( ) /4 30 MP ( )-( ) /4 30 MP ( )-( ) , /4 30 MP ( )-( ) ,000. 1,059. 1,113. 1,154. Combination Veneer 2/upholstery /4 30 MP ( )-( ) /4 30 MP ( )-( ) /4 30 MP ( )-( ) /4 30 MP ( )-( ) ,012. 1, /4 30 MP ( )-( ) 1,014. 1,048. 1,058. 1,117. 1,183. 1, /4 30 MP ( )-( ) 1,142. 1,186. 1,200. 1,271. 1,335. 1,384. Example: MP Y W210/20 MP2 Panel 30 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, the upholstery finish code and pattern number. Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. 12

13 Panels 30 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 30 MP V-( ) $747. $ /4 30 MP V-( ) /4 30 MP V-( ) , /4 30 MP V-( ) , /4 30 MP V-( ) 1,073. 1, /4 30 MP V-( ) 1,196. 1,436. Panel Planning Example: MP V-Y811 MP2 Panel 30 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finish 13 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces

14 Panels 39 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 39 MP ( ) $384. $424. $435. $502. $578. $ /4 39 MP ( ) /4 39 MP ( ) /4 39 MP ( ) /4 39 MP ( ) /4 39 MP ( ) , /4 39 MP ( ) ,001. 1,118. 1,210. Options panels, upholstered both sides /4 39 MP N( ) /4 39 MP N( ) /4 39 MP N( ) /4 39 MP N( ) /4 39 MP N( ) /4 39 MP N( ) /4 39 MP N( ) ,026. 1,107. Example: MP W210/20 MP2 Panel 39 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g. 10/20) and upholstery pattern numbers. 14 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating.

15 Panels 39 H glazed description w d h pattern no. C/T Glazed panels /4 39 MP C/T-( ) $ /4 39 MP C/T-( ) /4 39 MP C/T-( ) 1, /4 39 MP C/T-( ) 1, /4 39 MP C/T-( ) 1, /4 39 MP C/T-( ) 1,405. Panel Planning Example: MP C-613 MP2 Panel 39 Height 30 Width C Clear acrylic glazing 613 Frame finish For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Frame finish 15 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

16 Panels 39 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 39 MP ( )-( ) $600. $619. $621. $656. $693. $ /4 39 MP ( )-( ) /4 39 MP ( )-( ) /4 39 MP ( )-( ) /4 39 MP ( )-( ) ,014. 1,072. 1, /4 39 MP ( )-( ) 1,034. 1,073. 1,086. 1,153. 1,211. 1,255. Combination Veneer 2/upholstery /4 39 MP ( )-( ) /4 39 MP ( )-( ) /4 39 MP ( )-( ) , /4 39 MP ( )-( ) ,053. 1,098. 1, /4 39 MP ( )-( ) 1,099. 1,135. 1,151. 1,214. 1,288. 1, /4 39 MP ( )-( ) 1,242. 1,289. 1,305. 1,382. 1,452. 1,507. Example: MP Y W210/20 MP2 Panel 39 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, the upholstery finish code and pattern number. Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. 16

17 Panels 39 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 39 MP V-( ) $811. $ /4 39 MP V-( ) , /4 39 MP V-( ) , /4 39 MP V-( ) 1,054. 1, /4 39 MP V-( ) 1,165. 1, /4 39 MP V-( ) 1,301. 1,560. Panel Planning Example: MP V-Y811 MP2 Panel 39 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finish 17 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces.

18 Panels 42 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 42 MP ( ) $406. $448. $456. $525. $607. $ /4 42 MP ( ) /4 42 MP ( ) /4 42 MP ( ) /4 42 MP ( ) , /4 42 MP ( ) ,026. 1, /4 42 MP ( ) ,055. 1,177. 1,271. Options panels, upholstered both sides /4 42 MP N( ) /4 42 MP N( ) /4 42 MP N( ) /4 42 MP N( ) /4 42 MP N( ) /4 42 MP N( ) , /4 42 MP N( ) ,080. 1,164. Example: MP W210/20 MP2 Panel 42 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g. 10/20) and upholstery pattern numbers. 18 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating.

19 Panels 42 H glazed description w d h pattern no. C/T Glazed panels /4 42 MP C/T-( ) $ /4 42 MP C/T-( ) 1, /4 42 MP C/T-( ) 1, /4 42 MP C/T-( ) 1, /4 42 MP C/T-( ) 1, /4 42 MP C/T-( ) 1,480. Panel Planning Example: MP T-613 MP2 Panel 42 Height 30 Width T Translucent acrylic glazing 613 Frame finish Specification Notes For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Frame finish 19 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

20 Panels 42 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 42 MP ( )-( ) $632. $649. $653. $692. $728. $ /4 42 MP ( )-( ) /4 42 MP ( )-( ) /4 42 MP ( )-( ) , /4 42 MP ( )-( ) ,009. 1,066. 1,129. 1, /4 42 MP ( )-( ) 1,089. 1,130. 1,142. 1,212. 1,272. 1,318. Combination Veneer 2/upholstery /4 42 MP ( )-( ) /4 42 MP ( )-( ) /4 42 MP ( )-( ) ,001. 1,038. 1, /4 42 MP ( )-( ) 1,003. 1,037. 1,050. 1,106. 1,157. 1, /4 42 MP ( )-( ) 1,158. 1,197. 1,212. 1,278. 1,354. 1, /4 42 MP ( )-( ) 1,307. 1,357. 1,370. 1,453. 1,524. 1,583. Example: MP Y W210/20 MP2 Panel 42 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, then upholstery finish code and pattern number. 20 Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces.

21 Panels 42 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 42 MP V-( ) $852. $1, /4 42 MP V-( ) , /4 42 MP V-( ) 1,012. 1, /4 42 MP V-( ) 1,109. 1, /4 42 MP V-( ) 1,228. 1, /4 42 MP V-( ) 1,368. 1,643. Panel Planning Example: MP V-Y811 MP2 Panel 42 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finish Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. 21

22 Panels 48 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 48 MP ( ) $444. $489. $503. $580. $668. $ /4 48 MP ( ) /4 48 MP ( ) /4 48 MP ( ) /4 48 MP ( ) ,002. 1, /4 48 MP ( ) ,130. 1, /4 48 MP ( ) ,012. 1,159. 1,297. 1,398. Options panels, upholstered both sides /4 48 MP2-4818N( ) /4 48 MP2-4824N( ) /4 48 MP2-4830N( ) /4 48 MP2-4836N( ) /4 48 MP2-4842N( ) , /4 48 MP2-4848N( ) ,035. 1, /4 48 MP2-4860N( ) ,064. 1,190. 1,280. Example: MP W210/20 MP2 Panel 48 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g., 15/40) and upholstery pattern numbers. 22 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating.

23 Panels 48 H glazed description w d h pattern no. C/T Glazed panels /4 48 MP C/T-( ) $ /4 48 MP C/T-( ) 1, /4 48 MP C/T-( ) 1, /4 48 MP C/T-( ) 1, /4 48 MP C/T-( ) 1, /4 48 MP C/T-( ) 1,540. Panel Planning Example: MP C-613 MP2 Panel 48 Height 30 Width C Clear acrylic glazing 613 Frame finish For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Frame finish 23 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

24 Panels 48 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 48 MP ( )-( ) $660. $675. $680. $721. $764. $ /4 48 MP ( )-( ) /4 48 MP ( )-( ) /4 48 MP ( )-( ) ,016. 1, /4 48 MP ( )-( ) ,017. 1,026. 1,085. 1,131. 1, /4 48 MP ( )-( ) 1,084. 1,130. 1,141. 1,206. 1,273. 1,315. Combination Veneer 2/upholstery /4 48 MP ( )-( ) /4 48 MP ( )-( ) , /4 48 MP ( )-( ) ,050. 1,089. 1, /4 48 MP ( )-( ) 1,054. 1,089. 1,099. 1,162. 1,217. 1, /4 48 MP ( )-( ) 1,171. 1,221. 1,230. 1,303. 1,359. 1, /4 48 MP ( )-( ) 1,301. 1,357. 1,369. 1,448. 1,530. 1,578. Example: MP Y W210/20 MP2 Panel 48 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, then upholstery finish code and pattern number. 24 Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces.

25 Panels 48 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 48 MP V-( ) $861. $1, /4 48 MP V-( ) , /4 48 MP V-( ) 1,021. 1, /4 48 MP V-( ) 1,129. 1, /4 48 MP V-( ) 1,262. 1, /4 48 MP V-( ) 1,449. 1,703. Panel Planning Example: MP V-Y811 MP2 Panel 48 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finish 25 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces.

26 Panels 56 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 56 MP ( ) $460. $545. $559. $643. $705. $ /4 56 MP ( ) /4 56 MP ( ) /4 56 MP ( ) ,007. 1, /4 56 MP ( ) ,084. 1, /4 56 MP ( ) ,055. 1,177. 1, /4 56 MP ( ) ,023. 1,053. 1,206. 1,348. 1,456. Options panels, upholstered both sides /4 56 MP2-5618N( ) /4 56 MP2-5624N( ) /4 56 MP2-5630N( ) /4 56 MP2-5636N( ) /4 56 MP2-5642N( ) , /4 56 MP2-5648N( ) ,080. 1, /4 56 MP2-5660N( ) ,106. 1,236. 1,337. Example: MP W210/20 MP2 Panel 56 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes Upholstered panels: For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g., 20/40) and upholstery pattern numbers. 26 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating.

27 Panels 56 H glazed description w d h pattern no. C/T Glazed panels /4 56 MP C/T-( ) $1, /4 56 MP C/T-( ) 1, /4 56 MP C/T-( ) 1, /4 56 MP C/T-( ) 1, /4 56 MP C/T-( ) 1, /4 56 MP C/T-( ) 1,667. Panel Planning Example: MP C-613 MP2 Panel 56 Height 30 Width C Clear acrylic glazing 613 Frame finish For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Frame finish Panel stiffeners should be specified with glazed panels in straight or corner configurations. See page Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

28 Panels 56 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 56 MP ( )-( ) $671. $709. $716. $759. $788. $ /4 56 MP ( )-( ) /4 56 MP ( )-( ) , /4 56 MP ( )-( ) ,018. 1,076. 1, /4 56 MP ( )-( ) 1,014. 1,062. 1,072. 1,132. 1,196. 1, /4 56 MP ( )-( ) 1,122. 1,180. 1,194. 1,262. 1,321. 1,370. Combination Veneer 2/upholstery /4 56 MP ( )-( ) /4 56 MP ( )-( ) ,037. 1, /4 56 MP ( )-( ) ,029. 1,046. 1,103. 1,157. 1, /4 56 MP ( )-( ) 1,087. 1,141. 1,153. 1,222. 1,293. 1, /4 56 MP ( )-( ) 1,214. 1,273. 1,288. 1,360. 1,436. 1, /4 56 MP ( )-( ) 1,348. 1,417. 1,431. 1,513. 1,587. 1,647. Example: MP Y W210/20 MP2 Panel 56 Height 30 Width Y811 Veneer finish 15 Fabric group no. W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, then upholstery finish code and pattern number. Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. 28

29 Panels 56 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 56 MP V( ) $874. $1, /4 56 MP V( ) , /4 56 MP V( ) 1,030. 1, /4 56 MP V( ) 1,151. 1, /4 56 MP V( ) 1,308. 1, /4 56 MP V( ) 1,468. 1,765. Panel Planning Example: MP V-Y811 MP2 Panel 56 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finish Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. 29 Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces.

30 Panels 64 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 64 MP ( ) $499. $576. $592. $675. $799. $ /4 64 MP ( ) /4 64 MP ( ) , /4 64 MP ( ) ,064. 1, /4 64 MP ( ) ,018. 1,139. 1, /4 64 MP ( ) ,089. 1,235. 1, /4 64 MP ( ) ,053. 1,080. 1,240. 1,444. 1,556. Options panels, upholstered both sides /4 64 MP2-6418N( ) /4 64 MP2-6424N( ) /4 64 MP2-6430N( ) /4 64 MP2-6436N( ) , /4 64 MP2-6442N( ) ,046. 1, /4 64 MP2-6448N( ) ,000. 1,132. 1, /4 64 MP2-6460N( ) ,137. 1,321. 1,430. Example: MP W210/20 MP2 Panel 64 Height 30 Width 15 Surface type W210/20 Upholstery Surface type/finish suffixes Upholstered panels: For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g., 20/40) and upholstery pattern numbers. 30 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating.

31 Panels 64 H glazed description w d h pattern no. C/T Glazed panels /4 64 MP C/T( ) $1, /4 64 MP C/T( ) 1, /4 64 MP C/T( ) 1, /4 64 MP C/T( ) 1, /4 64 MP C/T( ) 1, /4 64 MP C/T( ) 1,801. Panel Planning Example: MP T-613 MP2 Panel 64 Height 30 Width T Translucent acrylic glazing 613 Frame finish For glazed panels specify: C- Clear tempered glassc T- Translucent acrylic Frame finish Panel stiffeners should be specified with glazed panels in all straight or corner configurations. See page Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

32 Panels 64 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 64 MP ( )-( ) $755. $783. $790. $834. $895. $ /4 64 MP ( )-( ) , /4 64 MP ( )-( ) ,027. 1,087. 1, /4 64 MP ( )-( ) 1,024. 1,065. 1,075. 1,133. 1,206. 1, /4 64 MP ( )-( ) 1,117. 1,183. 1,196. 1,262. 1,320. 1, /4 64 MP ( )-( ) 1,247. 1,305. 1,318. 1,389. 1,460. 1,515. Combination Veneer 2/upholstery /4 64 MP ( )-( ) ,001. 1,074. 1, /4 64 MP ( )-( ) ,026. 1,037. 1,096. 1,165. 1, /4 64 MP ( )-( ) 1,113. 1,157. 1,168. 1,235. 1,306. 1, /4 64 MP ( )-( ) 1,228. 1,277. 1,291. 1,361. 1,448. 1, /4 64 MP ( )-( ) 1,342. 1,419. 1,436. 1,513. 1,585. 1, /4 64 MP ( )-( ) 1,497. 1,566. 1,583. 1,664. 1,751. 1,821. Example: MP Y W210/20 MP2 Panel 64 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, then upholstery finish code and pattern number. Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. 32

33 Panels 64 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 64 MP V-( ) $990. $1, /4 64 MP V-( ) 1,072. 1, /4 64 MP V-( ) 1,211. 1, /4 64 MP V-( ) 1,349. 1, /4 64 MP V-( ) 1,507. 1, /4 64 MP V-( ) 1,684. 2,022. Panel Planning Example: MP V-Y811 MP2 Panel 64 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finish Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. 33

34 Panels 80 H upholstered description w d h pattern no High performance panels, upholstered both sides /4 80 MP ( ) $712. $844. $864. $993. $1,130. $1, /4 80 MP ( ) ,097. 1,212. 1, /4 80 MP ( ) ,001. 1,029. 1,180. 1,297. 1, /4 80 MP ( ) ,067. 1,100. 1,262. 1,402. 1, /4 80 MP ( ) ,140. 1,173. 1,347. 1,507. 1, /4 80 MP ( ) 1,032. 1,228. 1,263. 1,450. 1,632. 1,753. Options panels, upholstered both sides /4 80 MP N( ) ,035. 1, /4 80 MP N( ) ,006. 1,110. 1, /4 80 MP N( ) ,084. 1,190. 1, /4 80 MP N( ) ,008. 1,157. 1,280. 1, /4 80 MP N( ) ,046. 1,075. 1,235. 1,376. 1, /4 80 MP N( ) ,128. 1,159. 1,326. 1,494. 1,608. Example: MP W210/20 MP2 Panel 80 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes Upholstered panels: For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g., 20/40) and upholstery pattern numbers. 34 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. High performance panel acoustical ratings: NRC.80, STC 24 Options panel acoustical ratings: NRC.75, STC 8 Upholstered panels may be specified to achieve ASTM E-84 Class A flamespread rating.

35 Panels 80 H glazed description w d h pattern no. C/T Glazed panels /4 80 MP C/T-( ) $1, /4 80 MP C/T-( ) 1, /4 80 MP C/T-( ) 1, /4 80 MP C/T-( ) 1, /4 80 MP C/T-( ) 2, /4 80 MP C/T-( ) 2,269. Panel Planning Example: MP C-613 MP2 Panel 80 Height 30 Width C Clear acrylic glazing 613 Frame finish For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Frame finish Panel stiffeners should be specified with glazed panels in all straight or corner configurations. See page W panels are not available. 35 Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W glazed panels are not available.

36 Panels 80 H combination veneer/upholstery description w d h pattern no Combination Veneer 1/upholstery /4 80 MP ( )-( ) $1,003. $1,086. $1,100. $1,163. $1,230. $1, /4 80 MP ( )-( ) 1,086. 1,183. 1,197. 1,270. 1,325. 1, /4 80 MP ( )-( ) 1,194. 1,286. 1,301. 1,373. 1,436. 1, /4 80 MP ( )-( ) 1,308. 1,407. 1,424. 1,507. 1,571. 1, /4 80 MP ( )-( ) 1,436. 1,541. 1,559. 1,644. 1,724. 1, /4 80 MP ( )-( ) 1,570. 1,692. 1,710. 1,806. 1,896. 1,956. Combination Veneer 2/upholstery /4 80 MP ( )-( ) 1,205. 1,305. 1,320. 1,397. 1,480. 1, /4 80 MP ( )-( ) 1,305. 1,419. 1,437. 1,520. 1,593. 1, /4 80 MP ( )-( ) 1,431. 1,542. 1,560. 1,650. 1,723. 1, /4 80 MP ( )-( ) 1,570. 1,688. 1,708. 1,806. 1,885. 1, /4 80 MP ( )-( ) 1,723. 1,848. 1,872. 1,970. 2,068. 2, /4 80 MP ( )-( ) 1,884. 2,032. 2,054. 2,165. 2,275. 2,350. Example: MP Y W210/20 MP2 Panel 80 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery When specifying combination panels, follow panel size with veneer finish code, the upholstery finish code and pattern number. Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces. Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. 36

37 Panels 80 H veneer both sides description w d h pattern no. V1 V2 Veneer both sides /4 80 MP V-( ) $1,332. $1, /4 80 MP V-( ) 1,440. 1, /4 80 MP V-( ) 1,570. 1, /4 80 MP V-( ) 1,745. 2, /4 80 MP V-( ) 1,942. 2, /4 80 MP V-( ) 2,160. 2,593. Panel Planning Example: MP V-Y811 MP2 Panel 80 Height 30 Width V Veneer both sides Y811 Veneer finish For veneer panels specify: Veneer finishes Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. 37 Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. 60 W panels are not available with veneer surfaces.

38 Panels ported panel 39,42 and 48 H description type w d h pattern no Ported panels, upholstered both sides 39 H /4 39 MP P( ) $481. $533. $543. $627. $721. $ /4 39 MP P( ) /4 39 MP P( ) /4 39 MP P( ) , /4 39 MP P( ) ,083. 1, /4 39 MP P( ) ,073. 1,222. 1, H /4 42 MP P( ) /4 42 MP P( ) /4 42 MP P( ) , /4 42 MP P( ) ,021. 1, /4 42 MP P( ) ,034. 1,138. 1, /4 42 MP P( ) ,130. 1,285. 1, H /4 48 MP P( ) /4 48 MP P( ) /4 48 MP P( ) , /4 48 MP P( ) ,012. 1,126. 1, /4 48 MP P( ) ,138. 1,254. 1, /4 48 MP P( ) ,053. 1,084. 1,242. 1,411. 1,514. Example: MP P-15- W210/20 MP2 Panel 39 Height 18 Width P Ported panel 15 Fabric group W210/20 Upholstery Surface type/finish suffixes Upholstered panels: For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Ported panels are upholstered both sides and may be upholstered with textiles approved for application on Reff panels only. For combination of fabrics list both suffixes and upholstery pattern numbers. List price is the average of the two fabric grades. Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Vertical duplexes, power and data ports and connectors are specified separately. 38

39 Panels ported panel 56,64 and 80 H description type w d h pattern no Ported panels, upholstered both sides 56 H /4 56 MP P( ) $578. $678. $697. $802. $883. $ /4 56 MP P( ) ,000. 1, /4 56 MP P( ) ,014. 1,115. 1, /4 56 MP P( ) ,103. 1,260. 1, /4 56 MP P( ) ,018. 1,046. 1,198. 1,354. 1, /4 56 MP P( ) ,114. 1,147. 1,318. 1,474. 1, H /4 64 MP P( ) ,000. 1, /4 64 MP P( ) ,093. 1, /4 64 MP P( ) ,061. 1,211. 1, /4 64 MP P( ) ,008. 1,152. 1,329. 1, /4 64 MP P( ) ,075. 1,108. 1,272. 1,426. 1, /4 64 MP P( ) ,156. 1,192. 1,362. 1,544. 1,684. Panel Planning 80 H /4 80 MP P( ) ,054. 1,083. 1,242. 1,411. 1, /4 80 MP P( ) ,162. 1,196. 1,370. 1,514. 1, /4 80 MP P( ) 1,066. 1,252. 1,288. 1,478. 1,621. 1, /4 80 MP P( ) 1,141. 1,335. 1,374. 1,575. 1,750. 1, /4 80 MP P( ) 1,221. 1,427. 1,466. 1,683. 1,881. 2, /4 80 MP P( ) 1,292. 1,536. 1,577. 1,813. 2,038. 2,194. Example: MP P-15- W210/20 MP2 Panel 64 Height 18 Width P Ported panel 15 Fabric group W210/20 Upholstery Surface type/finish suffixes Upholstered panels: For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Ported panels are upholstered both sides and may be upholstered with textiles approved for application on Reff panels only. For combination of fabrics list both suffixes and upholstery pattern numbers. List price is the average of the two fabric grades. Top caps/raceway covers are specified as separate kits, and are bulk shipped to facilitate installation. Vertical duplexes, power and data ports and connectors are specified separately. 39

40 Panels combination upholstered/markerboard description type w d h pattern no Combination upholstered/markerboard 48 H MP M-( ) $624. $660. $670. $712. $748. $ MP M-( ) MP M-( ) MP M-( ) ,021. 1, MP M-( ) ,001. 1,016. 1,076. 1,144. 1, H MP M-( ) MP M-( ) MP M-( ) , MP M-( ) ,024. 1,086. 1, MP M-( ) ,054. 1,066. 1,133. 1,197. 1, H MP M-( ) MP M-( ) , MP M-( ) ,023. 1,094. 1, MP M-( ) ,055. 1,067. 1,132. 1,195. 1, MP M-( ) 1,093. 1,158. 1,172. 1,240. 1,312. 1, H MP M-( ) ,052. 1,064. 1,132. 1,193. 1, MP M-( ) 1,059. 1,132. 1,146. 1,224. 1,278. 1, MP M-( ) 1,157. 1,232. 1,250. 1,327. 1,401. 1, MP M-( ) 1,263. 1,346. 1,361. 1,449. 1,524. 1, MP M-( ) 1,380. 1,479. 1,492. 1,587. 1,679. 1,740. Example: MP M-15-W210/2 MP2 Panel 64 Height 36 Width M Markerboard 15 Fabric group W210/2 Upholstery When specifying combination panels, follow panel size with markerboard code, then the upholstery finish code and pattern number. Surface type/finish suffixes: M- Markerboard surface 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Top caps/raceway covers are specified as separate kits, and are bulk packed to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. Markerboard surface is non-metallic. 40

41 Panels markerboard both sides description type w d h pattern no. markerboard both sides Markerboard both sides 48 H MP M $ MP M MP M MP M 1, MP M 1, H MP M MP M MP M MP M 1, MP M 1,214. Panel Planning 64 H MP M MP M MP M 1, MP M 1, MP M 1, H MP M 1, MP M 1, MP M 1, MP M 1, MP M 1,724. Example: MP M MP2 Panel 64 Height 36 Width M Markerboard For markerboard surface on both sides, no finish code is required. Surface type/finish suffixes: M- Markerboard surface 41 Top caps/raceway covers are specified as separate kits, and are bulk packed to facilitate installation. Non-powered panel raceways accommodate 96 or more 4-pair unshielded twisted pair cables (Category 5, 5E or 6). Powered panel raceways accommodate up to 48 4-pair cables. Power components are ordered separately and field-installed. Markerboard surface is non-metallic.

42 Doors rolling door description type w d h pattern no. paint RC C T Rolling door 64 H with lock MRD-6436-(L/R)-( )-( )-L $2,533. $2,641. $2, MRD-6442-(L/R)-( )-( )-L 2,628. 2,767. 3, MRD-6448-(L/R)-( )-( )-L 2,662. 2,799. 3, H no lock MRD-6436-(L/R)-( )-( )-N 2,348. 2,460. 2, MRD-6442-(L/R)-( )-( )-N 2,446. 2,583. 2, MRD-6448-(L/R)-( )-( )-N 2,480. 2,615. 2, H with lock MRD-8036-(L/R)-( )-( )-L 2,671. 2,976. 3, MRD-8042-(L/R)-( )-( )-L 2,777. 3,002. 3, MRD-8048-(L/R)-( )-( )-L 2,822. 3,034. 3, H no lock MRD-8036-(L/R)-( )-( )-N 2,487. 2,792. 3, MRD-8042-(L/R)-( )-( )-N 2,594. 2,819. 3, MRD-8048-(L/R)-( )-( )-N 2,640. 2,854. 3,166. Threshold for rolling door 36 door 73 1 /4 3 3 /8 MRD-FT door 85 1 /4 3 3 /8 MRD-FT door 97 1 /4 3 3 /8 MRD-FT Panel stiffeners for 80 H doors 90 2-way L MM1-DSL2 43. In-line post MM1-DSP1 43. Straight MM1-DSS1 43. Masts for doors (set of 2) AYI-DMK 43. Post trim covers for 64 H door 90 2-way L 2 1 /4 64 MT1-64XL2-( ) way T 2 1 /4 64 MT1-64XT3-( ) 49. Post trim covers for 80 H door 90 2-way L 2 1 /4 80 MT1-80XL2-( ) way T 2 1 /4 80 MT1-80XT3-( ) 61. Example: MRD-6436-L-C-613-N M RD Rolling door 64 Height 36 Width L Left C Door finish 613 Frame finish N No lock Specify: Left / Right Hand Glazing for rolling door: C- Clear acrylic T- Translucent acrylic RC- Ribbed polycarbonate Frame finish Lock / No Lock Rolling doors mount to the outside of workstations. 64 H rolling door kit includes door panel, post with mounting bracket, and door jamb (for door side opposite to mounting bracket). Specify post high-low top cap (see page ) for panel adjacent to the door jamb. 80 H rolling door kit includes door panel, post with mounting bracket, door jamb (for door side opposite to mounting bracket), header, top cap for header and two corner brackets. Top caps for panels adjacent to 80 rolling doors must be modified in the field. Header for 80 door mounts with two corner brackets. Specify separately straight connector tracks to connect door post and door jamb to adjacent panels. A full threshold may be specified separately. A threshold is required to assure the ADA requirement for maximum pull force of 5 lbs. is met. Rolling door post with mounting bracket must attach to a panel, or panel run, of width equal or greater than the nominal width of the door. When fully open, the door will extend 1 3 /16 (half the width of a universal post) beyond a panel of corresponding width. Door jamb may be attached to a panel or to a universal post. When attaching to a post, specify separately dedicated vertical trims for 90 2-way L or 3-way T connections. Masts for doors combine with panel stiffeners for 80 doors to mount stackable add-up panels over doors. 42

43 Doors hinged door description type w d h pattern no. laminate paint V1 V2 Hinged door with frame no lock MHD-8036-(L/R)-(P/L/V)-( )-( )-N $2,039. $2,239. $2,637. $3, MHD-8042-(L/R)-(P/L/V)-( )-( )-N 2,155. 2,308. 2,884. 3,459. with lock MHD-8036-(L/R)-(P/L/V)-( )-( )-L 2,747. 2,947. 3,344. 3, MHD-8042-(L/R)-(P/L/V)-( )-( )-L 2,861. 3,018. 3,592. 4,165. Panel Planning left hand shown Panel stiffeners for 80 H doors 90 2-way L MM1-DSL2 43. In-line post MM1-DSP1 43. Straight MM1-DSS1 43. Post trim covers for 80 H door 90 2-way L 2 1 /4 80 MT1-80XL2-( ) way T 2 1 /4 80 MT1-80XT3-( ) 61. Masts for doors (set of 2) AYI-DMK 43. Example: MHD-8042-L-V-Y L M HD Hinged door 80 Height 42 Width L Left V Veneer Y811 Door finish 613 Frame finish L With lock Specify: Left / Right hand. Door Panel finish type: P Paint L Laminate V Veneer Door panel finish Frame finish Lock/ No lock 43 Specify separately two straight connector tracks to connect door to adjacent panels or posts. When attaching to a post, specify separately dedicated vertical trims for 90 2-way L or 3-way T connections. Hinged door with no lock is intended to allow specifiers to use non-knoll hardware to match other architectural details. Lock and handle are not included and must be purchased separately from a non-knoll source. Hinged door with no lock is a solid panel. It is not drilled for lock and handle assembly. Lock and handle, purchased separately, must be field drilled and installed. Masts for doors combine with panel stiffeners for 80 doors to mount stackable add-up panels over doors.

44 Windows 9,16,18,22 and 32 H description w d h pattern no. C T Windows, 9 H /4 9 MP3-W0918-C/T-( ) $390. $ /4 9 MP3-W0924-C/T-( ) /4 9 MP3-W0930-C/T-( ) /4 9 MP3-W0936-C/T-( ) /4 9 MP3-W0942-C/T-( ) /4 9 MP3-W0948-C/T-( ) /4 9 MP3-W0960-C/T-( ) Windows, 16 H /4 16 MP3-W1618-C/T-( ) /4 16 MP3-W1624-C/T-( ) /4 16 MP3-W1630-C/T-( ) /4 16 MP3-W1636-C/T-( ) /4 16 MP3-W1642-C/T-( ) /4 16 MP3-W1648-C/T-( ) /4 16 MP3-W1660-C/T-( ) Windows, 18 H /4 18 MP3-W1818-C/T-( ) /4 18 MP3-W1824-C/T-( ) /4 18 MP3-W1830-C/T-( ) /4 18 MP3-W1836-C/T-( ) /4 18 MP3-W1842-C/T-( ) /4 18 MP3-W1848-C/T-( ) /4 18 MP3-W1860-C/T-( ) Windows, 22 H /4 22 MP3-W2218-C/T-( ) /4 22 MP3-W2224-C/T-( ) /4 22 MP3-W2230-C/T-( ) /4 22 MP3-W2236-C/T-( ) /4 22 MP3-W2242-C/T-( ) /4 22 MP3-W2248-C/T-( ) /4 22 MP3-W2260-C/T-( ) Windows mount on any height vertical panel of the same width with add-on connectors or full height connectors. Example: MP3-W2230-C-613 MP3 Panel W Window 22 Height 30 Width C Window finish 613 Frame finish Specify glazing for windows: C- Clear tempered glass T- Translucent acrylic Frame finish All windows are 1 /4 less than nominal height to allow for a 1 /4 horizontal reveal with light seal. 9 H windows may be mounted on 30 H and 39 H vertical panels and connected, respectively, with standard 39 H and 48 H connector tracks and post assemblies. 16 H windows may be mounted on 48 H and 64 H vertical panels and connected, respectively, with standard 64 H and 80 H connector tracks and post assemblies. 18 H windows may be mounted on 30 H and 56 H vertical panels and connected, respectively, with standard 48 H and 74 H connector tracks and post assemblies. 22 H windows may be mounted on 42 H vertical panels and connected with standard 64 H connector tracks and post assemblies. 32 H windows may be mounted on 48 H vertical panels and connected with standard 80 H connector tracks and post assemblies. Full height 48 and 64 connectors permit cantilevered shelves and overhead cabinets. Two 16 H windows may be mounted ona48 H upholstered panel only when using 80 H full height connector tracks and post assemblies. 44

45 Windows 9,16,18,22 and 32 H description w d h pattern no. C T Windows, 32 H /4 32 MP3-W3218-C/T-( ) $668. $ /4 32 MP3-W3224-C/T-( ) /4 32 MP3-W3230-C/T-( ) /4 32 MP3-W3236-C/T-( ) , /4 32 MP3-W3242-C/T-( ) , /4 32 MP3-W3248-C/T-( ) 1,083. 1, /4 32 MP3-W3260-C/T-( ) 1,252. 1,409. Panel Planning Example: MP3-W2230-C-613 MP3 Panel W Window 22 Height 30 Width C Window finish 613 Frame finish Specify glazing for windows: C- Clear tempered glass T- Translucent acrylic Frame finish Windows mount on any height vertical panel of the same width with add-on connectors or full height connectors. All windows are 1 /4 less than nominal height to allow for a 1 /4 horizontal reveal with light seal. 9 H windows may be mounted on 30 H and 39 H vertical panels and connected, respectively, with standard 39 H and 48 H connector tracks and post assemblies. 16 H windows may be mounted on 48 H and 64 H vertical panels and connected, respectively, with standard 64 H and 80 H connector tracks and post assemblies. 22 H windows may be mounted on 42 H vertical panels and connected with standard 64 H connector tracks and post assemblies. 32 H windows may be mounted on 48 H vertical panels and connected with standard 80 H connector tracks and post assemblies. Full height 48 and 64 connectors permit cantilevered shelves and overhead cabinets. Two 16 H windows may be mounted ona48 H upholstered panel only when using 80 H full height connector tracks and post assemblies. 18 H windows may be mounted on 30 H and 56 H vertical panels and connected, respectively, with standard 48 H and 74 H connector tracks and post assemblies. 45

46 Markerboard and combination add-on panels 16,18,22 and 32 H description w d h pattern no. combination marker both sides 16 H MP3-A1624-M( ) $418. $439. $442. $472. $506. $525. $ MP3-A1630-M( ) MP3-A1636-M( ) MP3-A1642-M( ) MP3-A1648-M( ) H MP3-A1824-M( ) MP3-A1830-M( ) MP3-A1836-M( ) MP3-A1842-M( ) MP3-A1848-M( ) H MP3-A2224-M( ) MP3-A2230-M( ) MP3-A2236-M( ) MP3-A2242-M( ) MP3-A2248-M( ) H MP3-A3224-M( ) MP3-A3230-M( ) MP3-A3236-M( ) MP3-A3242-M( ) MP3-A3248-M( ) Example: MP3-A1636-M15- W210/20 MP3 Panel A Add-on 16 Height 36 Width M Markerboard 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes: For markerboard surface on both sides, follow add-on panel size with finish code M. When specifying combination panels, follow add-on panel size with markerboard code, then upholstery finish code and pattern number. M- Markerboard surface 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group Add-on panels mount on any height vertical panel of the same width with add-on connectors or full height connectors. All add-on panels are 1 /4 less than nominal height to allow for a 1 /4 horizontal reveal with light seal. 16 H add-on panels may be mounted on 48 H and 74 H vertical panels and connected, respectively, with standard 64 H and 80 connector tracks and post assemblies. 18 H add-on panels may be mounted on 30 H and 56 H vertical panels and connected, respectively, with standard 48 H and 74 connector tracks and post assemblies. 22 H add-on panels may be mounted on 42 H vertical panels and connected with standard 64 H connector tracks and post assemblies. 32 H add-on panels may be mounted on 48 H vertical panels and connected with standard 80 H connector tracks and post assemblies. Full height 48 and 64 connectors permit cantilevered shelves and overhead cabinets. Add-on panels may also span two lower panels of the same total width. Markerboard surface is non-metallic.

47 Upholstered add-on panels 16,18,22 and 32 H description w d h pattern no Add-on panels, upholstered, 16 H /4 16 MP3-A1618-( ) $302. $344. $354. $409. $471. $ /4 16 MP3-A1624-( ) /4 16 MP3-A1630-( ) /4 16 MP3-A1636-( ) /4 16 MP3-A1642-( ) /4 16 MP3-A1648-( ) /4 16 MP3-A1660-( ) Add-on panels, upholstered, 18 H /4 18 MP3-A1818-( ) /4 18 MP3-A1824-( ) /4 18 MP3-A1830-( ) /4 18 MP3-A1836-( ) /4 18 MP3-A1842-( ) /4 18 MP3-A1848-( ) /4 18 MP3-A1860-( ) ,023. Panel Planning Add-on panels, upholstered, 22 H /4 22 MP3-A2218-( ) /4 22 MP3-A2224-( ) /4 22 MP3-A2230-( ) /4 22 MP3-A2236-( ) /4 22 MP3-A2242-( ) /4 22 MP3-A2248-( ) /4 22 MP3-A2260-( ) ,012. 1,090. Add-on panels, upholstered, 32 H /4 32 MP3-A3218-( ) /4 32 MP3-A3224-( ) /4 32 MP3-A3230-( ) /4 32 MP3-A3236-( ) /4 32 MP3-A3242-( ) /4 32 MP3-A3248-( ) , /4 32 MP3-A3260-( ) ,080. 1,165. Example: MP3-A W210/20 MP3 Panel A Add-on 22 Height 30 Width 15 Surface type and group no. W210/20 Upholstery Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered add-on panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g. 10/20) and upholstery pattern numbers. 47 Add-on panels mount on any height vertical panel of the same width with add-on connectors or full height connectors. All add-on panels are 1 /4 less than nominal height to allow for a 1 /4 horizontal reveal with light seal. 16 H add-on panels may be mounted on 48 H and 64 H vertical panels and connected, respectively, with standard 64 H and 80 H connector tracks and post assemblies. 18 H add-on panels may be mounted on 30 H and 56 H vertical panels and connected, respectively, with standard 48 H and 74 H connector tracks and post assemblies. 22 H add-on panels may be mounted on 42 H vertical panels and connected with standard 64 H connector tracks and post assemblies. 32 H add-on panels may be mounted on 48 H vertical panels and connected with standard 80 H connector tracks and post assemblies. Full height 48 and 64 connectors permit cantilevered shelves and overhead cabinets. Upholstered panel ratings are high performance acoustical: NRC.80, STC 24 - acoustic rating. Two 16 H add-on panels may be mounted on a 48 H upholstered panel only when using 80 H full height connector track and post assemblies.

48 Upholstered Options add-on panels 16,18,22 and 32 H description w d h pattern no Options add-on panels, upholstered, 16 H /4 16 MP3-A1618N-( ) $285. $313. $324. $373. $430. $ /4 16 MP3-A1624N-( ) /4 16 MP3-A1630N-( ) /4 16 MP3-A1636N-( ) /4 16 MP3-A1642N-( ) /4 16 MP3-A1648N-( ) /4 16 MP3-A1660N-( ) Options add-on panels, upholstered, 18 H /4 18 MP3-A1818N-( ) /4 18 MP3-A1824N-( ) /4 18 MP3-A1830N-( ) /4 18 MP3-A1836N-( ) /4 18 MP3-A1842N-( ) /4 18 MP3-A1848N-( ) /4 18 MP3-A1860N-( ) Options add-on panels, upholstered, 22 H /4 22 MP3-A2218N-( ) /4 22 MP3-A2224N-( ) /4 22 MP3-A2230N-( ) /4 22 MP3-A2236N-( ) /4 22 MP3-A2242N-( ) /4 22 MP3-A2248N-( ) /4 22 MP3-A2260N-( ) Options add-on panels, upholstered, 32 H /4 32 MP3-A3218N-( ) /4 32 MP3-A3224N-( ) /4 32 MP3-A3230N-( ) /4 32 MP3-A3236N-( ) /4 32 MP3-A3242N-( ) /4 32 MP3-A3248N-( ) /4 32 MP3-A3260N-( ) ,062. Example: MP3-A W210/2 MP3 Panel A Add-on 22 Height 30 Width 15 Surface type and group no. W210/2 Upholstery Surface type/finish suffixes For upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Upholstered add-on panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. For combinations of fabrics list both suffixes (e.g. 10/20) and upholstery pattern numbers. 48 Add-on panels mount on any height vertical panel of the same width with add-on connectors or full height connectors. All add-on panels are 1 /4 less than nominal height to allow for a 1 /4 horizontal reveal with light seal. 16 H add-on panels may be mounted on 48 H and 64 H vertical panels and connected, respectively, with standard 64 H and 80 H connector tracks and post assemblies. 18 H add-on panels may be mounted on 30 H and 56 H vertical panels and connected, respectively, with standard 48 H and 74 H connector tracks and post assemblies. 22 H add-on panels may be mounted on 42 H vertical panels and connected with standard 64 H connector tracks and post assemblies. 32 H add-on panels may be mounted on 48 H vertical panels and connected with standard 80 H connector tracks and post assemblies. Full height 48 and 64 connectors permit cantilevered shelves and overhead cabinets. Two 16 H add-on panels may be mounted on a 48 H upholstered panel only when using 80 H full height connector track and post assemblies.

49 Veneer and combination add-on panels veneer group 1 16,18,22 and 32 H description w d h pattern no. combination Veneer both sides 16 H MP3-A1618-( )( ) $448. $469. $474. $500. $533. $551. $ MP3-A1624-( )( ) MP3-A1630-( )( ) MP3-A1636-( )( ) MP3-A1642-( )( ) MP3-A1648-( )( ) H MP3-A1818-( )( ) MP3-A1824-( )( ) MP3-A1830-( )( ) MP3-A1836-( )( ) MP3-A1842-( )( ) MP3-A1848-( )( ) ,000. Panel Planning 22 H MP3-A2218-( )( ) MP3-A2224-( )( ) MP3-A2230-( )( ) MP3-A2236-( )( ) MP3-A2242-( )( ) MP3-A2248-( )( ) , H MP3-A3218-( )( ) MP3-A3224-( )( ) MP3-A3230-( )( ) MP3-A3236-( )( ) MP3-A3242-( )( ) ,000. 1, MP3-A3248-( )( ) ,006. 1,014. 1,069. 1,103. 1,196. Example: MP3-A2230-Y W210/20 MP3 Panel A Add-on 22 Height 30 Width Y811 Veneer finish 15 Fabric group W210/20 Upholstery Surface type/finish suffixes: When specifying combination panels, follow panel size with veneer finish code, the upholstery finish code and pattern number.for upholstered panels, specify upholstery pattern number after the fabric group number. 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 To order veneer on both sides, follow panel size with suffix V- and veneer finish code. Example: MP3-A2230-V Add-on panels mount on any height vertical panel of the same width with add-on connectors or full height connectors. All add-on panels are 1 /4 less than nominal height to allow for a 1 /4 horizontal reveal with light seal. 16 H add-on panels may be mounted on 48 H and 74 H vertical panels and connected, respectively, with standard 64 H and 80 connector tracks and post assemblies. 18 H add-on panels may be mounted on 30 H and 56 H vertical panels and connected, respectively, with standard 48 H and 74 connector tracks and post assemblies. 22 H add-on panels may be mounted on 42 H vertical panels and connected with standard 64 H connector tracks and post assemblies. 32 H add-on panels may be mounted on 48 H vertical panels and connected with standard 80 H connector tracks and post assemblies. Full height 48 and 64 connectors permit cantilevered shelves and overhead cabinets.

50 Add-on connectors, post assemblies upholstered description type w d h pattern no. no trim Connector track No trim 9 MC1-A09S1 $ MC1-A16S MC1-A18S MC1-A22S MC1-A32S way, L Upholstered 2 1 /4 2 1 /4 9 MC1-A09L2-( ) /4 2 1 /4 16 MC1-A16L2-( ) /4 2 1 /4 18 MC1-A18L2-( ) /4 2 1 /4 22 MC1-A22L2-( ) /4 2 1 /4 32 MC1-A32L2-( ) way, T Upholstered 2 1 /4 2 1 /4 9 MC1-A09T3-( ) /4 2 1 /4 16 MC1-A16T3-( ) /4 2 1 /4 18 MC1-A18T3-( ) /4 2 1 /4 22 MC1-A22T3-( ) /4 2 1 /4 32 MC1-A32T3-( ) way, X No trim 2 1 /4 2 1 /4 9 MC1-A09X /4 2 1 /4 16 MC1-A16X /4 2 1 /4 18 MC1-A18X /4 2 1 /4 22 MC1-A22X /4 2 1 /4 32 MC1-A32X End Upholstered 2 1 /4 1 9 MC1-A09E1-( ) / MC1-A16E1-( ) / MC1-A18E1-( ) / MC1-A22E1-( ) / MC1-A32E1-( ) End Post Upholstered 2 1 /4 2 1 /4 9 MC1-A09P1-( ) /4 2 1 /4 16 MC1-A16P1-( ) /4 2 1 /4 18 MC1-A18P1-( ) /4 2 1 /4 22 MC1-A22P1-( ) /4 2 1 /4 32 MC1-A32P1-( ) Example: MC1-A16L2-15- W210/20 MC1 Connector A Add-on 16 Height L2 2 way L 15 Surface type and group no. W210/20 Upholstery Assembly: S1- Straight connector track L way post assembly T way post assembly X4-4-way post assembly E1- End connector assembly P1- End post assembly S2 Straight post assembly Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Post assembly pricing includes connector tracks, posts, and trim covers when required. Top caps/ raceway covers are specified as separate kits and bulk shipped to facilitate installation. Add-on connectors include brackets to add panels or windows to the top of any vertical panel except glazed panels. Add-on connectors must be specified in the same height as the add-on panel or window. Add-on connectors do not support cantilevered shelves or overhead cabinets. For these applications, specify full height connectors. Add-on end post should be specified when add-on panels end over L or T post. 2-way straight post should be specified when add-on panels connect in a straight line over an X or T post. 50

51 Add-on connectors, post assemblies upholstered description type w d h pattern no. no trim way straight post Upholstered 2 1 /4 2 1 /4 9 MC1-A09S2-( ) $185. $202. $202. $202. $213. $ /4 2 1 /4 16 MC1-A16S2-( ) /4 2 1 /4 18 MC1-A18S2-( ) /4 2 1 /4 22 MC1-A22S2-( ) /4 2 1 /4 32 MC1-A32S2-( ) Panel Planning Example: MC1-A16L2-15- W210/20 MC1 Connector A Add-on 16 Height L2 2 way L 15 Surface type and group no. W210/20 Upholstery Assembly: S1- Straight connector track L way post assembly T way post assembly X4-4-way post assembly E1- End connector assembly P1- End post assembly S2 Straight post assembly Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Post assembly pricing includes connector tracks, posts, and trim covers when required. Top caps/ raceway covers are specified as separate kits and bulk shipped to facilitate installation. Add-on connectors include brackets to add panels or windows to the top of any vertical panel except glazed panels. Add-on connectors must be specified in the same height as the add-on panel or window. Add-on connectors do not support cantilevered shelves or overhead cabinets. For these applications, specify full height connectors. Add-on end post should be specified when add-on panels end over L or T post. 2-way straight post should be specified when add-on panels connect in a straight line over an X or T post. 51

52 Add-on connectors, post assemblies non-upholstered description type w d h pattern no. no trim Paint V1 Connector track No trim 9 MC1-A09S1 $ MC1-A16S MC1-A18S MC1-A22S MC1-A32S way, L Non-upholstered 2 1 /4 2 1 /4 9 MC1-A09L2-( ) /4 2 1 /4 16 MC1-A16L2-( ) /4 2 1 /4 18 MC1-A18L2-( ) /4 2 1 /4 22 MC1-A22L2-( ) /4 2 1 /4 32 MC1-A32L2-( ) way, T Non-upholstered 2 1 /4 2 1 /4 9 MC1-A09T3-( ) /4 2 1 /4 16 MC1-A16T3-( ) /4 2 1 /4 18 MC1-A18T3-( ) /4 2 1 /4 22 MC1-A22T3-( ) /4 2 1 /4 32 MC1-A32T3-( ) way, X No trim 2 1 /4 2 1 /4 9 MC1-A09X /4 2 1 /4 16 MC1-A16X /4 2 1 /4 18 MC1-A18X /4 2 1 /4 22 MC1-A22X /4 2 1 /4 32 MC1-A32X End Non-upholstered 2 1 /4 1 9 MC1-A09E1-( ) / MC1-A16E1-( ) / MC1-A18E1-( ) / MC1-A22E1-( ) / MC1-A32E1-( ) End Post Non-upholstered 2 1 /4 2 1 /4 9 MC1-A09P1-( ) /4 2 1 /4 16 MC1-A16P1-( ) /4 2 1 /4 18 MC1-A18P1-( ) /4 2 1 /4 22 MC1-A22P1-( ) /4 2 1 /4 32 MC1-A32P1-( ) Example: MC1-A16L2-613 MC1 Connector A Add-on 16 Height L2 2 way L 613 Paint finish Assembly: S1- Straight connector track L way post assembly T way post assembly X4-4-way post assembly E1- End connector assembly P1- End post assembly S2- Straight post assembly Please see previous page for. 52

53 Add-on connectors, post assemblies non-upholstered description type w d h pattern no. no trim Paint V way straight post Non-upholstered 2 1 /4 2 1 /4 9 MC1-A09S2-( ) $185. $ /4 2 1 /4 16 MC1-A16S2-( ) /4 2 1 /4 18 MC1-A18S2-( ) /4 2 1 /4 22 MC1-A22S2-( ) /4 2 1 /4 32 MC1-A32S2-( ) Panel Planning Example: MC1-A16L2-613 MC1 Connector A Add-on 16 Height L2 2 way L 613 Paint finish Assembly: S1- Straight connector track L way post assembly T way post assembly X4-4-way post assembly E1- End connector assembly P1- End post assembly S2- Straight post assembly Please see previous page for. 53

54 Connectors, post assemblies upholstered description type w d h pattern no. no trim Connector track No trim 30 MC1-30S1 $ MC1-39S MC1-42S MC1-48S MC1-56S MC1-64S MC1-80S way, L Upholstered 2 1 /4 2 1 /4 30 MC1-30L2-( ) /4 2 1 /4 39 MC1-39L2-( ) /4 2 1 /4 42 MC1-42L2-( ) /4 2 1 /4 48 MC1-48L2-( ) /4 2 1 /4 56 MC1-56L2-( ) /4 2 1 /4 64 MC1-64L2-( ) /4 2 1 /4 80 MC1-80L2-( ) way, T Upholstered 2 1 /4 2 1 /4 30 MC1-30T3-( ) /4 2 1 /4 39 MC1-39T3-( ) /4 2 1 /4 42 MC1-42T3-( ) /4 2 1 /4 48 MC1-48T3-( ) /4 2 1 /4 56 MC1-56T3-( ) /4 2 1 /4 64 MC1-64T3-( ) /4 2 1 /4 80 MC1-80T3-( ) way, X No trim 2 1 /4 2 1 /4 30 MC1-30X /4 2 1 /4 39 MC1-39X /4 2 1 /4 42 MC1-42X /4 2 1 /4 48 MC1-48X /4 2 1 /4 56 MC1-56X /4 2 1 /4 64 MC1-64X /4 2 1 /4 80 MC1-80X End Upholstered 2 1 / MC1-30E1-( ) / MC1-39E1-( ) / MC1-42E1-( ) / MC1-48E1-( ) / MC1-56E1-( ) / MC1-64E1-( ) / MC1-80E1-( ) Example: MC1-42L2-15-W210/20 MC1 Connector 42 Height L2 2 way L 15 Surface type and group no. W210/20 Upholstery Assembly: S1- Straight connector L way post assembly T way post assembly X way post assembly E1- End connector assembly Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Post assembly pricing includes connector tracks, posts and trim covers when required. Top caps and raceway covers are specified as separate kits and bulk shipped to facilitate installation. 54

55 Connectors, post assemblies non-upholstered description type w d h pattern no. no trim Paint V1 V2 Connector track No trim 30 MC1-30S1 $ MC1-39S MC1-42S MC1-48S MC1-56S MC1-64S MC1-80S way, L Non-upholstered 2 1 /4 2 1 /4 30 MC1-30L2-( ) /4 2 1 /4 39 MC1-39L2-( ) /4 2 1 /4 42 MC1-42L2-( ) /4 2 1 /4 48 MC1-48L2-( ) /4 2 1 /4 56 MC1-56L2-( ) /4 2 1 /4 64 MC1-64L2-( ) /4 2 1 /4 80 MC1-80L2-( ) Panel Planning 90 3-way, T Non-upholstered 2 1 /4 2 1 /4 30 MC1-30T3-( ) /4 2 1 /4 39 MC1-39T3-( ) /4 2 1 /4 42 MC1-42T3-( ) /4 2 1 /4 48 MC1-48T3-( ) /4 2 1 /4 56 MC1-56T3-( ) /4 2 1 /4 64 MC1-64T3-( ) /4 2 1 /4 80 MC1-80T3-( ) way, X No trim 2 1 /4 2 1 /4 30 MC1-30X /4 2 1 /4 39 MC1-39X /4 2 1 /4 42 MC1-42X /4 2 1 /4 48 MC1-48X /4 2 1 /4 56 MC1-56X /4 2 1 /4 64 MC1-64X /4 2 1 /4 80 MC1-80X End Non-upholstered 2 1 / MC1-30E1-( ) / MC1-39E1-( ) / MC1-42E1-( ) / MC1-48E1-( ) / MC1-56E1-( ) / MC1-64E1-( ) / MC1-80E1-( ) Example: MC1-42L2-V-Y811 MC1 Connector 42 Height L2 2 way L V Surface type Y811 Veneer Assembly: S1- Straight connector L way post assembly T way post assembly X way post assembly E1- End connector assembly Post assembly pricing includes connector tracks, posts and trim covers when required. Top caps and raceway covers are specified as separate kits and bulk shipped to facilitate installation. 55

56 Connectors, post assemblies 120-degree upholstered description type w d h pattern no. Paint way, V Upholstered 2 1 /4 2 1 /4 30 MC1-30V2-( )( ) $166. $183. $183. $183. $196. $ /4 2 1 /4 39 MC1-39V2-( )( ) /4 2 1 /4 42 MC1-42V2-( )( ) /4 2 1 /4 48 MC1-48V2-( )( ) /4 2 1 /4 56 MC1-56V2-( )( ) /4 2 1 /4 64 MC1-64V2-( )( ) /4 2 1 /4 80 MC1-80V2-( )( ) Top cap and raceway cover kits way, V MT5-CV2-( )( ) way, Y MT5-CY3-( ) 4. Example: MC1-64V2-15-W210/ MC1 Connector 64 Height V way V 15 Fabric grade W210/20 Upholstery 613 Inside trim finish Assembly: V way connector Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Inside trim Finish Post assembly pricing includes connector tracks, posts and trim covers when required. 2-way V post assemblies include one outside trim, upholstered, and one inside trim, painted. 3-way Y post assemblies include three inside trims, painted. Top caps and raceway covers are specified separately. Veneer trim finishes are not available on 120 post assemblies. 56

57 Connectors, post assemblies 120-degree non-upholstered description type w d h pattern no. Paint way, V Non-upholstered 2 1 /4 2 1 /4 30 MC1-30V2-( )( ) $ /4 2 1 /4 39 MC1-39V2-( )( ) /4 2 1 /4 42 MC1-42V2-( )( ) /4 2 1 /4 48 MC1-48V2-( )( ) /4 2 1 /4 56 MC1-56V2-( )( ) /4 2 1 /4 64 MC1-64V2-( )( ) /4 2 1 /4 80 MC1-80V2-( )( ) way, Y Non-upholstered 2 1 /4 2 1 /4 30 MC1-30Y3-( ) /4 2 1 /4 39 MC1-39Y3-( ) /4 2 1 /4 42 MC1-42Y3-( ) /4 2 1 /4 48 MC1-48Y3-( ) /4 2 1 /4 56 MC1-56Y3-( ) /4 2 1 /4 64 MC1-64Y3-( ) /4 2 1 /4 80 MC1-80Y3-( ) 288. Panel Planning Top cap and raceway cover kits way, V MT5-CV2-( )( ) way, Y MT5-CY3-( ) 4. Example: MC1-64V MC1 Connector 64 Height V way V 613 Outside trim finish 613 Inside trim finish Assembly: V way Y way Outside and inside trim paint finish. Veneer trim finishes are not available on 120 post assemblies. 57 Post assembly pricing includes connector tracks, posts and trim covers when required. 2-way V post assemblies include one outside trim and one inside trim, painted. 3-way Y post assemblies include three inside trims, painted. Top caps and raceway covers are specified separately.

58 Connectors, post assemblies variable angles upholstered description type w d h pattern no Variable angle Upholstered 2 1 /4 2 1 /4 64 MC1-64H1-( ) $579. $587. $587. $587. $607. $632. Example: MC1-64H1-15-W210/20 MC1 accessory 64 Height H1 Variable angle 15 Surface type and group no. W210/20 Upholstery Finishes for variable angle: Upholstered: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Variable angle connector includes connector tracks, continuous hinge, and trim covers. Specify top cap and raceway cover kit separately. 58

59 Connectors, post assemblies variable angles non-upholstered description type w d h pattern no. Paint V1 V2 Variable angle Non-upholstered 2 1 /4 2 1 /4 64 MC1-64H1-( ) $580. $661. $792. Panel Planning Example: MC1-64H1-613 MC1 accessory 64 Height H1 Variable angle 613 Painted finish Specify non-upholstered surface type: ( ) Painted (finish code) V( ) Veneer (finish code) Variable angle connector includes connector tracks, continuous hinge, and trim covers. Specify top cap and raceway cover kit separately. 59

60 High-low connectors straight upholstered description type w d h pattern no Straight high-low connectors 39 H 2 1 /4 39 M ( )-( ) $140. $151. $151. $151. $160. $ H 2 1 /4 48 M ( )-( ) /4 48 M ( )-( ) /4 48 M ( )-( ) H 2 1 /4 56 M ( )-( ) /4 56 M ( )-( ) /4 56 M ( )-( ) H 2 1 /4 64 M ( )-( ) /4 64 M ( )-( ) /4 64 M ( )-( ) /4 64 M ( )-( ) H 2 1 /4 80 M ( )-( ) /4 80 M ( )-( ) Example: M W210/20 M2 Connector 5040 Configuration 613 Top cap finish 15 Surface type and group no. W210/20 Upholstery First finish suffix is for top cap, second is surface type. Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 For a high-low configuration with wood top caps, change pattern number prefix to M3. For V2 finishes, add $60 to the price listed above. Specify finish for top cap as shown (included in high-low post assemblies). High-low connectors are used to join panels of two heights in a straight line. Assemblies come complete with connector track, hardware and trim as required. Order dedicated high-low top caps separately for the lower panel in a straight high-low configuration. All high-low pattern numbers contain a logical four digit code to accommodate the range of high-low connections in which 30, is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. To specify a straight high-low connection between a 54 panel and a 42 panel: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise; hold this digit with a Denote the next highest panel, 42 = Hold the next place with a 0. The correct code is M

61 High-low connectors straight non-upholstered description type w d h pattern no. Painted V1 V2 Straight high-low connectors 39 H 2 1 /4 39 M ( )-( ) $136. $200. $ H 2 1 /4 48 M ( )-( ) /4 48 M ( )-( ) /4 48 M ( )-( ) H 2 1 /4 56 M ( )-( ) /4 56 M ( )-( ) /4 56 M ( )-( ) Panel Planning 64 H 2 1 /4 64 M ( )-( ) /4 64 M ( )-( ) /4 64 M ( )-( ) /4 64 M ( )-( ) H 2 1 /4 80 M ( )-( ) /4 80 M ( )-( ) Example: M V-Y811 M2 Connector 5040 Configuration 613 Top cap finish V Surface type Y811 Veneer First finish suffix is for top cap, second is surface type. When ordering non-upholstered trims, surface type must match top cap type. Non-upholstered surface type: ( ) Painted (finish code) V( ) Veneer (finish code) For a high-low configuration with wood top caps, change pattern number prefix to M3. Painted high-low connectors are not available with wood top caps. For V2 finishes, add $60 to the price listed above. Specify finish for top cap as shown (included in high-low post assemblies). High-low connectors are used to join panels of two heights in a straight line. Assemblies come complete with connector track, hardware and trim as required. Order dedicated high-low top caps separately for the lower panel in a straight high-low configuration. All high-low pattern numbers contain a logical four digit code to accommodate the range of high-low connections in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. To specify a straight high-low connection between a 54 panel and a 42 panel: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise; hold this digit with a Denote the next highest panel, 42 = Hold the next place with a 0. The correct code is M

62 High-low post assemblies 90 2-way, L upholstered description type w d h pattern no way, L high-low assemblies 39 H 2 1 /4 2 1 /4 39 M ( )-( )-( ) $272. $283. $283. $283. $291. $ H 2 1 /4 2 1 /4 48 M ( )-( )-( ) /4 2 1 /4 48 M ( )-( )-( ) /4 2 1 /4 48 M ( )-( )-( ) H 2 1 /4 2 1 /4 56 M ( )-( )-( ) /4 2 1 /4 56 M ( )-( )-( ) /4 2 1 /4 56 M ( )-( )-( ) H 2 1 /4 2 1 /4 64 M ( )-( )-( ) /4 2 1 /4 64 M ( )-( )-( ) /4 2 1 /4 64 M ( )-( )-( ) /4 2 1 /4 64 M ( )-( )-( ) H 2 1 /4 2 1 /4 80 M ( )-( )-( ) /4 2 1 /4 80 M ( )-( )-( ) Example: M W210/20 M2 Connector 5400 Configuration 613 Top cap finish 613 Raceway finish 15 Surface type and group no. W210/20 Upholstery First suffix is for top cap finish, second is for raceway cover finish. Final suffix is for trim covers surface type. When ordering non-upholstered trims, surface type must match top cap type. Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group For a high-low configuration with wood top caps, change pattern number prefix to M3. For V2 finishes, add $60 to the price listed above. Painted high-low connectors are not available with wood top caps. Specify finish for top cap and raceway covers, as shown (included in high-low post assemblies). High-low post assemblies are used to join panels of two heights in a corner configuration. Assemblies come complete with post, hardware, and trim as required. Order dedicated high-low top caps separately for the lower panel in a corner high-low configuration. All high-low pattern numbers contain a logical four digit code to accommodate the range of high-low connections in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. To specify an L high-low connection between a 54 panel and a 42 panel: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise to the lower panel, 42 = Hold the next two places with a 0. The correct code is M

63 High-low post assemblies 90 2-way, L non-upholstered description type w d h pattern no. Paint V1 V way, L 39 H 2 1 /4 2 1 /4 39 M ( )-( )-( ) $264. $340. $ H 2 1 /4 2 1 /4 48 M ( )-( )-( ) /4 2 1 /4 48 M ( )-( )-( ) /4 2 1 /4 48 M ( )-( )-( ) H 2 1 /4 2 1 /4 56 M ( )-( )-( ) /4 2 1 /4 56 M ( )-( )-( ) /4 2 1 /4 56 M ( )-( )-( ) Panel Planning 64 H 2 1 /4 2 1 /4 64 M ( )-( )-( ) /4 2 1 /4 64 M ( )-( )-( ) /4 2 1 /4 64 M ( )-( )-( ) /4 2 1 /4 64 M ( )-( )-( ) H 2 1 /4 2 1 /4 80 M ( )-( )-( ) /4 2 1 /4 80 M ( )-( )-( ) Example: M V- Y811 M2 Connector 5400 Configuration 613 Top cap finish 613 Raceway finish V Surface type Y811 Veneer First suffix is for top cap finish, second is for raceway cover finish. Final suffix is for trim covers surface type. When ordering non-upholstered trims, surface type must match top cap type. Non-upholstered surface types: ( ) Painted (finish code) V( ) Veneer (finish code) 63 For a high-low configuration with wood top caps, change pattern number prefix to M3. For V2 finishes, add $60 to the price listed above. Painted high-low connectors are not available with wood top caps. Specify finish for top cap and raceway covers, as shown (included in high-low post assemblies). High-low post assemblies are used to join panels of two heights in a corner configuration. Assemblies come complete with post, hardware, and trim as required. Order dedicated high-low top caps separately for the lower panel in a corner high-low configuration. All high-low pattern numbers contain a logical four digit code to accommodate the range of high-low connections in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. To specify an L high-low connection between a 54 panel and a 42 panel: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise to the lower panel, 42 = Hold the next two places with a 0. The correct code is M

64 High-low post assemblies 90 3-way, T upholstered description type w d h pattern no way, T high-low assemblies (code 5404 shown) 39 H 2 1 /4 2 1 /4 39 M ( )-( )-( ) $349. $369. $369. $369. $386. $ /4 2 1 /4 39 M ( )-( )-( ) /4 2 1 /4 39 M ( )-( )-( ) /4 2 1 /4 39 M ( )-( )-( ) H 2 1 /4 2 1 /4 48 M2-8*80-( )-( )-( ) /4 2 1 /4 48 M2-8*0*-( )-( )-( ) /4 2 1 /4 48 M2-88*0-( )-( )-( ) /4 2 1 /4 48 M2-8**0-( )-( )-( ) H 2 1 /4 2 1 /4 56 M2-5*0*-( )-( )-( ) /4 2 1 /4 56 M2-5*50-( )-( )-( ) /4 2 1 /4 56 M2-55*0-( )-( )-( ) /4 2 1 /4 56 M2-5**0-( )-( )-( ) H 2 1 /4 2 1 /4 80 M2-1*0*-( )-( )-( ) /4 2 1 /4 80 M2-1*10-( )-( )-( ) /4 2 1 /4 80 M2-11*0-( )-( )-( ) /4 2 1 /4 80 M2-1**0-( )-( )-( ) H 2 1 /4 2 1 /4 64 M2-6*60-( )-( )-( ) /4 2 1 /4 64 M2-6**0-( )-( )-( ) /4 2 1 /4 64 M2-6*0*-( )-( )-( ) /4 2 1 /4 64 M2-66*0-( )-( )-( ) Example: M W210/20 M2 Connector 5404 Configuration 613 Top cap finish 613 Raceway finish 15 Fabric group W210/20 Upholstery All high-low pattern numbers contain a logical four digit code in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. * Indicate height of lower panels replace * with one of the following: 3 30 H 9 39 H 4 42 H 8 48 H 5 56 H 6 64 H 1 80 H The following high-low connections are available as standard product: panel connection to ,39, ,42, ,48,42, ,48 First suffix is for top cap finish, second is for raceway finish. Final suffix is for trim covers surface type. Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 For a high-low configuration with wood top caps, change pattern number prefix to M3. For V2 finishes, add $60 to the price listed above. High-low post assemblies are used to join panels of two heights in a T configuration. Assemblies come complete with post, hardware, and trim as required. Order dedicated high-low top caps separately for the lower panels in a T-configuration. To specify a 90 3-way high-low connection of 42 panels with a 56 panel between: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise to the next highest panel, 42 = Hold the next digit with a Continue in the same direction to the last panel, 42 = 4. The correct code is M For all other connections, please contact your Custom Product Development representative. 64

65 High-low post assemblies 90 3-way, T non-upholstered description type w d h pattern no. Paint V1 V way, T high-low assemblies (code 5404 shown) 48 H 2 1 /4 2 1 /4 48 M2-8*80-( )-( )-( ) $341. $433. $ /4 2 1 /4 48 M2-8**0-( )-( )-( ) /4 2 1 /4 48 M2-88*0-( )-( )-( ) /4 2 1 /4 48 M2-8*0*-( )-( )-( ) H 2 1 /4 2 1 /4 56 M2-55*0-( )-( )-( ) /4 2 1 /4 56 M2-5*50-( )-( )-( ) /4 2 1 /4 56 M2-5**0-( )-( )-( ) /4 2 1 /4 56 M2-5*0*-( )-( )-( ) H 2 1 /4 2 1 /4 64 M2-6**0-( )-( )-( ) /4 2 1 /4 64 M2-6*0*-( )-( )-( ) /4 2 1 /4 64 M2-6*60-( )-( )-( ) /4 2 1 /4 64 M2-66*0-( )-( )-( ) Panel Planning 80 H 2 1 /4 2 1 /4 80 M2-11*0-( )-( )-( ) /4 2 1 /4 80 M2-1*0*-( )-( )-( ) /4 2 1 /4 80 M2-1**0-( )-( )-( ) /4 2 1 /4 80 M2-1*10-( )-( )-( ) H 2 1 /4 2 1 /4 39 M ( )-( )-( ) /4 2 1 /4 39 M ( )-( )-( ) /4 2 1 /4 39 M ( )-( )-( ) /4 2 1 /4 39 M ( )-( )-( ) Example: M V- Y811 M2 Connector 5404 Configuration 613 Top cap finish 613 Raceway finish V Surface type Y811 Veneer All high-low pattern numbers contain a logical four digit code in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. *Indicate height of lower panels replace * with one of the following: 3 30 H 9 39 H 4 42 H 8 48 H 5 56 H 6 64 H 1 80 H The following high-low connections are available as standard product: panel connection to ht ,39, ,42, ,48,42, ,48 For all other connections, please contact your Custom Product Development representative.first suffix is for top cap finish, second is for raceway cover finish. Final suffix is for trim covers surface type. When ordering non-upholstered trims, surface type must match top cap type.surface type: V( ) Veneer (finish code) ( ) Painted (finish code) High-low post assemblies are used to join panels of two heights in a T configuration. Assemblies come complete with post, hardware, and trim as required. For a high-low configuration with wood top caps, change pattern number prefix to M3. For V2 finishes, add $60 to the price listed above. Painted high-low connectors are not available with wood top caps. Order dedicated high-low top caps separately for the lower panels in a T-configuration. To specify a 90 3-way high-low connection of 42 panels with a 56 panel between: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise to the next highest panel, 42 = Hold the next digit with a Continue in the same direction to the last panel, 42 = 4. The correct code is M

66 High-low post assemblies 90 4-way, X upholstered description type w d h pattern no way, X high-low assemblies (code 5454 shown) 39 H 2 1 /4 2 1 /4 39 M ( )-( ) $405. $423. $423. $423. $431. $ /4 2 1 /4 39 M ( )-( ) /4 2 1 /4 39 M ( )-( ) /4 2 1 /4 39 M ( )-( ) H 2 1 /4 2 1 /4 48 M2-8*8*-( )-( ) /4 2 1 /4 48 M2-8***-( )-( ) /4 2 1 /4 48 M2-88**-( )-( ) /4 2 1 /4 48 M2-888*-( )-( ) H 2 1 /4 2 1 /4 56 M2-5*5*-( )-( ) /4 2 1 /4 56 M2-55**-( )-( ) /4 2 1 /4 56 M2-5***-( )-( ) /4 2 1 /4 56 M2-555*-( )-( ) H 2 1 /4 2 1 /4 64 M2-6***-( )-( ) /4 2 1 /4 64 M2-6*6*-( )-( ) /4 2 1 /4 64 M2-66**-( )-( ) /4 2 1 /4 64 M2-666*-( )-( ) H 2 1 /4 2 1 /4 80 M2-1*1*-( )-( ) /4 2 1 /4 80 M2-1***-( )-( ) /4 2 1 /4 80 M2-11**-( )-( ) /4 2 1 /4 80 M2-111*-( )-( ) Example: M W210/5 M2 Connector 5444 Configuration 613 Top cap finish 15 Fabric group W210/5 Upholstery All high-low pattern numbers contain a logical four digit code in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. * Indicate height of lower panels replace * with one of the following: 3 30 H 9 39 H 4 42 H 8 48 H 5 56 H 6 64 H 1 80 H The following high-low connections are available as standard product: panel connection to ,39, ,42, ,48,42, ,48 For all other connections, please contact your Custom Product Development representative. First suffix is for top cap finish, second is for raceway cover finish. Raceway covers will always be matched with the metallic finish corresponding to top cap finish. Final suffix is for trim covers surface type. When ordering non-upholstered trims, surface type must match top cap type. Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 For a high-low configuration with wood top caps, change pattern number prefix to M3. For V2 finishes, add $60 to the price listed above. High-low post assemblies are used to join panels of two heights in an X configuration. Assemblies come complete with post, hardware, and trim as required. Order dedicated high-low top caps separately for the lower panel in an X configuration. To specify a 90 4-way high-low connection of a 56 panel and three 42 panels: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise to the next highest panel, 42 = Continue in the same direction to the next panel, 42 = Continue in the same direction to the last panel, 42 = 4. The correct code is M

67 High-low post assemblies 90 4-way, X non-upholstered description type w d h pattern no. Paint V1 V way, X high-low assemblies (code 5404 shown) 39 H 2 1 /4 2 1 /4 39 M ( )-( ) $404. $471. $ /4 2 1 /4 39 M ( )-( ) /4 2 1 /4 39 M ( )-( ) /4 2 1 /4 39 M ( )-( ) H 2 1 /4 2 1 /4 48 M2-88**-( )-( ) /4 2 1 /4 48 M2-8*8*-( )-( ) /4 2 1 /4 48 M2-8***-( )-( ) /4 2 1 /4 48 M2-888*-( )-( ) H 2 1 /4 2 1 /4 56 M2-5***-( )-( ) /4 2 1 /4 56 M2-55**-( )-( ) /4 2 1 /4 56 M2-555*-( )-( ) /4 2 1 /4 56 M2-5*5*-( )-( ) Panel Planning 64 H 2 1 /4 2 1 /4 64 M2-6*6*-( )-( ) /4 2 1 /4 64 M2-66**-( )-( ) /4 2 1 /4 64 M2-6***-( )-( ) /4 2 1 /4 64 M2-666*-( )-( ) H 2 1 /4 2 1 /4 80 M2-1*1*-( )-( ) /4 2 1 /4 80 M2-1***-( )-( ) /4 2 1 /4 80 M2-11**-( )-( ) /4 2 1 /4 80 M2-111*-( )-( ) Example: M V-Y811 M2 Connector 5444 Configuration 613 Top cap finish V Veneer Y811 Finish All high-low pattern numbers contain a logical four digit code in which 30 is 3, 39 is 9, 42 is 4, 48 is 8, 56 is 5, 64 is 6, and 80 is 1. *Indicate height of lower panels replace * with one of the following: 3 30 H 9 39 H 4 42 H 8 48 H 5 56 H 6 64 H 1 80 H The following high-low connections are available as standard product: panel connection to 39 ht ,39, ,42, ,42, ,48 For all other connections, please contact your Custom Product Development representative.first suffix is for top cap finish (integral color or P2), second is for raceway cover finish. Raceway covers will always be matched with the metallic finish corresponding to top cap finish. Final suffix is for trim covers surface type. When ordering non-upholstered trims, surface type must match top cap type (integral color or P2).Surface type: ( ) Painted (finish code) V( ) Veneer (finish code) For a high-low configuration with wood top caps, change pattern number prefix to M3. Painted high-low connectors are not available with wood top caps. For V2 finishes, add $60 to the price listed above. High-low post assemblies are used to join panels of two heights in an X configuration. Assemblies come complete with post, hardware, and trim as required. Order dedicated high-low top caps separately for the lower panel in an X configuration. To specify a 90 4-way high-low connection of a 56 panel and three 42 panels: 1. Start with the highest panel, 56 = Proceed either clockwise or counter-clockwise to the next highest panel, 42 = Continue in the same direction to the next panel, 42 = Continue in the same direction to the last panel, 42 = 4. The correct code is M

68 Panel accessories wall starters description type w d h pattern no. Paint Wall starter /4 30 MM1-WS30( ) $ /4 39 MM1-WS39( ) /4 42 MM1-WS42( ) /4 48 MM1-WS48( ) /4 56 MM1-WS56( ) /4 64 MM1-WS64( ) /4 80 MM1-WS80( ) 273. Example: MM1-WS MM1 accessory WS Wall starter 56 Height 613 Finish Specify painted finishes for wall starter. Wall starters connect a panel run perpendicular to a fixed wall. Wall starter includes connector track, wall mount bracket, and painted end top cap. For wood top caps, order wood end trim top cap (MT5-CE1) separately. 68

69 Panel accessories accessories description type w d h pattern no. list price Panel stiffeners Corner MM1-PSL2 $43. Straight MM1-PSS1 23. Stabilizer foot MM1-SF( ) 259. Panel Planning Carpet grips (10) MM2-CG 20. Top Cap connector (set of 50) MM1-CNP2 38. Applicatin Notes Example: MM1 PSS1 MM1-PSS1 accessory Panel stiffener Specify paint finish for stabilizer foot. Panel stiffeners add rigidity to straight or corner connections, and should be used with glazed panels. Bracket is concealed under top caps. Stabilizer foot attaches to connector track to stabilize panel runs. Carpet grips snap onto panel glides to prevent panel runs from shifting on carpet. Glide rotates in carpet grip to permit leveling For applications involving Rolling Doors use stiffeners found on page

70 Trim covers for reconfiguration upholstered description type w d h pattern no way, L Upholstery 2 1 /4 9 MT1-09L2-( ) $56. $64. $64. $64. $77. $ /4 16 MT1-16L2-( ) /4 18 MT1-18L2-( ) /4 22 MT1-22L2-( ) /4 30 MT1-30L2-( ) /4 32 MT1-32L2-( ) /4 39 MT1-39L2-( ) /4 42 MT1-42L2-( ) /4 48 MT1-48L2-( ) /4 56 MT1-56L2-( ) /4 64 MT1-64L2-( ) /4 80 MT1-80L2-( ) way, T Upholstery 2 1 /4 9 MT1-09T3-( ) /4 16 MT1-16T3-( ) /4 18 MT1-18T3-( ) /4 22 MT1-22T3-( ) /4 30 MT1-30T3-( ) /4 32 MT1-32T3-( ) /4 39 MT1-39T3-( ) /4 42 MT1-42T3-( ) /4 48 MT1-48T3-( ) /4 56 MT1-56T3-( ) /4 64 MT1-64T3-( ) /4 80 MT1-80T3-( ) End Upholstery 2 1 /4 9 MT1-09E1-( ) /4 16 MT1-16E1-( ) /4 18 MT1-18E1-( ) /4 22 MT1-22E1-( ) /4 30 MT1-30E1-( ) /4 32 MT1-32E1-( ) /4 39 MT1-39E1-( ) /4 42 MT1-42E1-( ) /4 48 MT1-48E1-( ) /4 56 MT1-56E1-( ) /4 64 MT1-64E1-( ) /4 80 MT1-80E1-( ) Example: MT1-42L2-15-W210/2 MT1 Trim cover 42 Height L2 Assembly 15 Surface type W210/2 Upholstery Surface type: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Order trim covers for replacement or reconfiguration only. Trim covers are included in all connector kits. 70

71 Trim covers for reconfiguration non-upholstered description type w d h pattern no. Paint V1 V way, L Non-upholstered 2 1 /4 9 MT1-09L2-( ) $49. $95. n/a 2 1 /4 16 MT1-16L2-( ) n/a 2 1 /4 18 MT1-18L2-( ) n/a 2 1 /4 22 MT1-22L2-( ) n/a 2 1 /4 30 MT1-30L2-( ) /4 32 MT1-32L2-( ) n/a 2 1 /4 39 MT1-39L2-( ) /4 42 MT1-42L2-( ) /4 48 MT1-48L2-( ) /4 56 MT1-56L2-( ) /4 64 MT1-64L2-( ) /4 80 MT1-80L2-( ) Panel Planning 90 3-way, T Non-upholstered 2 1 /4 9 MT1-09T3-( ) n/a 2 1 /4 16 MT1-16T3-( ) n/a 2 1 /4 18 MT1-18T3-( ) n/a 2 1 /4 22 MT1-22T3-( ) n/a 2 1 /4 30 MT1-30T3-( ) /4 32 MT1-32T3-( ) n/a 2 1 /4 39 MT1-39T3-( ) /4 42 MT1-42T3-( ) /4 48 MT1-48T3-( ) /4 56 MT1-56T3-( ) /4 64 MT1-64T3-( ) /4 80 MT1-80T3-( ) End Non-upholstered 2 1 /4 9 MT1-09E1-( ) n/a 2 1 /4 16 MT1-16E1-( ) n/a 2 1 /4 18 MT1-18E1-( ) n/a 2 1 /4 22 MT1-22E1-( ) n/a 2 1 /4 30 MT1-30E1-( ) /4 32 MT1-32E1-( ) n/a 2 1 /4 39 MT1-39E1-( ) /4 42 MT1-42E1-( ) /4 48 MT1-48E1-( ) /4 56 MT1-56E1-( ) /4 64 MT1-64E1-( ) /4 80 MT1-80E1-( ) Example: MT1-22E1-613 MT1 Trim cover 22 Height E1 Configuration 613 Finish Specify paint surface or veneer finish. Order trim covers for replacement or reconfiguration only. Trim covers are included in all connector kits. 71

72 Access vertical raceway panels frame and face plates description type w d h pattern no. no finish paint Vertical raceway panel frame /4 42 MA1-V4206 $ /4 48 MA1-V /4 56 MA1-V /4 64 MA1-V /4 80 MA1-V Face plates kit for vertical raceway 4 openings one side 6 42 MA1-F4240( ) n/c 6 48 MA1-F4840( ) n/c 6 56 MA1-F5640( ) n/c 6 64 MA1-F6440( ) n/c 6 80 MA1-F8040( ) n/c 4 openings two sides (or 8 one side) 6 42 MA1-F4244( ) n/c 6 48 MA1-F4844( ) n/c 6 56 MA1-F5644( ) n/c 6 64 MA1-F6444( ) n/c 6 80 MA1-F8044( ) n/c 8 openings two sides 6 42 MA1-F4288( ) n/c 6 48 MA1-F4888( ) n/c 6 56 MA1-F5688( ) n/c 6 64 MA1-F6488( ) n/c 6 80 MA1-F8088( ) n/c No openings 6 42 MA1-F4200( ) n/c 6 48 MA1-F4800( ) n/c 6 56 MA1-F5600( ) n/c 6 64 MA1-F6400( ) n/c 6 80 MA1-F8000( ) n/c Example: MA1-V4206 MA1 Access V Vertical raceway 42 Height 06 Width For face plates, specify surface paint finish. n/c = No charge. 72 Vertical raceway extends panel base raceway to top cap, providing desk-height access and continuity with Highway and top cap raceway. Vertical raceway plans as 6 wide panel, requiring standard connectors to join to adjacent vertical panels. Specify 6 top cap and raceway cover kit separately. Vertical raceway panel has two full 2 x2 lay-in channels for power track, PDC connectors or lay-in cable management, and one center easy-access channel. Specify face plates kit with covers for all vertical raceway panels, with outlets one or both sides. Kit with four openings has two outlet openings just above worksurface and two outlets below the worksurface, in one channel. Other channel and all other covers have no outlet openings. Face plates kit with eight openings has four outlets above and four below, in two channels. All kits include covers for both sides of vertical raceway. Outlet openings accept PDC modules, blank filler plates, or power outlets (specify outlets and power components separately).

73 Access vertical raceway panels fabric covers description w d h pattern no Full fabric cover, no outlets (one side of panel only) /4 42 MA1-F42F( ) $142. $150. $153. $165. $180. $ /4 48 MA1-F48F( ) /4 56 MA1-F56F( ) /4 64 MA1-F64F( ) /4 80 MA1-F80F( ) Panel Planning Fabric covers with center channel, no outlets (one side of panel only) /4 14 MA1-F14C( ) /4 22 MA1-F22C( ) /4 32 MA1-F32C( ) /4 38 MA1-F38C( ) /4 42 MA1-F42C( ) /4 48 MA1-F48C( ) /4 56 MA1-F56C( ) /4 64 MA1-F64C( ) /4 80 MA1-F80C( ) Example: MA1-F42-F10 MA1 Access F Facecover 42 Height F Full cover 10 Fabric group Specify fabric grade for fabric covers: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group Full fabric cover replaces standard painted covers on one side of vertical raceway panel, with no outlet openings and no access to center channel. Fabric covers with center channel replace the standard painted covers above outlet openings, from 42 Hto the top of the panel. Specify 14 H covers for 56 H panel, 22 H covers for 64 H panel, or 38 H covers for 80 H panel. Fabric covers with center channel may also be specified in any standard panel height, with no outlet openings.

74 Access ceiling infeed panels description w d h pattern no. paint Ceiling infeed panel /4 48 MA1-CI48( ) $ /4 60 MA1-CI60( ) /4 72 MA1-CI72( ) 464. Example: MA1-CI MA1 Access CI Ceiling infeed 48 Height 613 Finish Specify painted finish for ceiling infeed panel. Ceiling infeed panel mounts between vertical raceway panel and ceiling, and may be trimmed on site. 74

75 Access Highway horizontal channels description type w d h pattern no. black Highway Panels /4 1 MA1-H6 $ /4 1 MA1-H /4 1 MA1-H /4 1 MA1-H /4 1 MA1-H /4 1 MA1-H /4 1 MA1-H /4 1 MA1-H Highway for high/low panels /4 1 MA1-HHL /4 1 MA1-HHL /4 1 MA1-HHL /4 1 MA1-HHL /4 1 MA1-HHL /4 1 MA1-HHL /4 1 MA1-HHL /4 1 MA1-HHL Panel Planning Highway Corner connector MA1-CL 7. End connector MA1-CE 7. End post MA1-CP 7. Straight post MA1-CS 7. T connector MA1-CT 7. X connector MA1-CX 7. Example: MA1-H42 MA1 Access H Highway 42 Width Highway for panels is black anodized aluminum with black vinyl flaps. Highway connectors are black color-integral molded plastic. 75 Highway snaps onto top of vertical panel to provide accessible horizontal cable channel on each side of panel. Highway may be planned on all same-height panels in a cluster or only on center spine panels. Highway accepts standard top caps. Highway capacity is approximately thirty-two Category 5 4-pair UTP cables ( 3 /16 dia. or equivalent), or sixteen each side. Highways for high-low panels are sized for the lower panel in straight high-low configurations. When Highway is planned only on the center spine of a cluster specify straight post Highway connectors at T and X connections; specify Highway end post connector at corner or T at end of spine. Specify straight post or end post top caps separately (see page 79) for all L, T and X connections. Highway connectors permit continuous lay-in cabling at all post connections. For full cable enclosure over L or T connections specify top cap raceway connectors (page 77).

76 Access Highway vertical wire management description type w d h pattern no. black paint Change of height highway Straight /4 6 MA1-HCS6( ) $ /4 8 MA1-HCS8( ) /4 9 MA1-HCS9( ) /4 10 MA1-HCS10( ) /4 14 MA1-HCS14( ) /4 16 MA1-HCS16( ) /4 18 MA1-HCS18( ) /4 22 MA1-HCS22( ) /4 26 MA1-HCS26( ) /4 32 MA1-HCS32( ) 53. Vertical wire manager 39 H panel 2 3 /8 35 MA1-VWM39( ) H panel 2 3 /8 38 MA1-VWM42( ) H panel 2 3 /8 44 MA1-VWM48( ) H panel 2 3 /8 52 MA1-VWM56( ) H panel 2 3 /8 60 MA1-VWM64( ) H panel 2 3 /8 76 MA1-VWM80( ) Example: MA1-VWM MA1 Access V Vertical raceway WM Wire manager 42 Height 612 Finish Change of height Highway are painted finish. Vertical wire managers are black (N) or painted finish: 76 Change of height Highway manages cables from one panel height to another in high-low straight configurations. Specify kit to match height difference in panels (e.g., MA1-HCS22 for change of height from 64 to 42 ). Specify Highway for high/low panels (see page 75) for lower panel in straight high/low connection. Vertical wire manager attaches to Highway rim anywhere along face of panel to control cables from Highway to worksurface, panel base raceway, or lower panels in corner T, or X configurations. Vertical wire manager is dimensioned to fit in the 3 /8 cable clearance behind the worksurface.

77 Access top cap raceway description type w d h pattern no. black Top Cap Raceway Panels /4 1 MA1-TC6 $ /4 1 MA1-TC /4 1 MA1-TC /4 1 MA1-TC /4 1 MA1-TC /4 1 MA1-TC /4 1 MA1-TC /4 1 MA1-TC Top cap raceway connectors Corner MA1-TCL 7. End MA1-TCE 7. End post MA1-TCP 7. Straight post MA1-TCS 7. T MA1-TCT 7. Panel Planning Example: MA1-TC42 MA1 Access TC Top Cap Raceway 42 Width Top Cap Raceway for panels is black anodized aluminum. Connectors are black color-integral molded plastic. Top Cap Raceway snaps onto top of vertical panel to provide horizontal cable channel. Top Cap Raceway accepts standard panel top caps. With top caps removed, unobstructed, lay-in cable capacity is approximately thirty three 4-pair UTP cables ( 3 /16 diameter). Cross-section area is 1 1/2 square inches. Top Cap Raceway connectors provide full cable enclosure above any panel connection. No connector is required above X posts. Top cap raceway connectors may also be used with Highway (see page 75) for full cable enclosure over L or T connections. When Top Cap Raceway is planned only on the center spine of a cluster specify straight post top cap raceway connectors at T and X connections; specify end post connector at corner or T at end of spine. Specify straight post or end post top caps separately (see pages 79-80). Specify Vertical Raceway (see page 76) to distribute cables from top cap raceway to worksurface height or panel base raceway. Cables also may pass from Top Cap Raceway to panel base raceway in L, T, or X connector post (six 25-pair cables). Top Cap Raceway does not accept power components. 77

78 Currents trim for trim covers for reconfiguration description type w d h pattern no. list price Top trim 6 2 AA1 T06 $ AA1 T AA1 T AA1 T AA1 T AA1 T AA1 T AA1 T AA1 T Top caps for post assemblies (90 4-way X shown) End post AA1 TMP1 11. Straight post AA1 TMS way L AA1 TML way T AA1 TMT way X AA1 TMX4 11. End connector (with connector track) AC1-39E AC1-48E AC1-64E1 82. End trim (no connector) 39 panel 2 39 AA1 39E panel 2 48 AA1 48E panel 2 64 AA1 64E 46. Raceway cover for end trim on panel AA1 RE( ) 30. Example: AA1 T36 AA1 T Top trim, panel 36 Width End and top trims are trim grey integral finish. Specify painted finish for raceway cover. Currents-style trim covers found on this page may be retrofitted to new and existing panels. When using Currents top trims, Currents for end correctors or end trims must also be used. Top trim corresponds in width to panels. Top cap for post assemblies can be retrofitted to post assemblies. End connector includes top cap and connector track. End trim may be specified instead of an end connector if cantilever capability is not required. End trim includes top cap. Raceway cover encloses end of panel raceway under Currents end trim. 78

79 Top cap and raceway cover kits painted finish top caps description type w d h pattern no. Paint Straight - no outlet plates 6 4 MT5-N6-( )( ) $ MT5-N18-( )( ) MT5-N24-( )( ) MT5-N30-( )( ) MT5-N36-( )( ) MT5-N42-( )( ) MT5-N48-( )( ) MT5-N60-( )( ) 22. Straight - with outlet plates 24 4 MT5-E24-( )( ) MT5-E30-( )( ) MT5-E36-( )( ) MT5-E42-( )( ) MT5-E48-( )( ) MT5-E60-( )( ) 22. Panel Planning Top cap and raceway cover kits Straight post (top cap only) MT5-CS2-( ) 2. End post (top cap only) MT5-CP1-( ) way, L MT5-CL2-( )( ) way, T MT5-CT3-( )( ) way, X MT5-CX4-( ) 2. End MT5-CE1-( )( ) 2. Variable angle MT5-CH1-( )( ) 2. Example: MT5 MT5-N Top cap/raceway cover kit Type N 36 Panel width 612 Paint finish 612 Raceway finish N- No outlet filler plates E- With outlet filler plates C- Post assembly For Chicago code raceway covers with outlet plates, see page 101. Specify finish for top cap and raceway covers. 79 Top caps/raceway covers are specified as separate kits and bulk shipped to facilitate installation. High-low post assemblies come with connector top cap/raceway cover kits; they do not have to be specified separately. 18 powered panels can transmit power but do not accept outlets. 24 W panels accept only one receptacle each side. All powered panels over 24 W have two receptacles on each side (4 duplex outlets per panel). Raceway covers with additional receptacle openings on panels over 42 W may be specified separately (in addition to top cap/covers kit). See Multiple outlet covers, page 82.

80 Top cap and raceway cover kits wood top caps description type w d h pattern no. PV1 PV2 Straight - no outlet plates 6 4 MT5-N6-( )( ) $7. $ MT5-N18-( )( ) MT5-N24-( )( ) MT5-N30-( )( ) MT5-N36-( )( ) MT5-N42-( )( ) MT5-N48-( )( ) MT5-N60-( )( ) Straight - with outlet plates 24 4 MT5-E24-( )( ) MT5-E30-( )( ) MT5-E36-( )( ) MT5-E42-( )( ) MT5-E48-( )( ) MT5-E60-( )( ) Top cap and raceway cover kits Straight post (top cap only) MT5-CS2-( ) End post (top cap only) MT5-CP1-( ) End MT5-CE1-( )( ) , 3-way, T MT5-CT3-( )( ) , 2-way, L MT5-CL2-( )( ) , 4-way, X MT5-CX4-( ) Variable angle MT5-CH1-( )( ) Example: MT5-N36-Y MT5 Top cap/raceway cover kit N Type 36 Panel width Y811 Top cap 612 Raceway cover paint finish N- No outlet filler plates E- With outlet filler plates C- Post assembly Specify top cap veneer suffix, then raceway cover finish suffix. PV1- Painted covers, V1 top cap PV2- Painted covers, V2 top cap For Chicago code raceway covers with outlet plates, see page 102. Top caps/raceway covers are specified as separate kits and bulk shipped to facilitate installation. High-low post assemblies come with connector top cap/raceway cover kits; order top caps for lower panels separately. 18 powered panels can transmit power but do not accept outlets. 24 W powered panels accept one receptacle each side. All powered panels over 24 W have two receptacles on each side (4 per panel). Raceway covers with additional receptacle openings on panels over 42 W may be specified separately (in addition to top cap/covers kit). See multiple outlet covers, page

81 High-low top caps description w d h pattern no. Paint V1 V2 High-low dedicated width top cap - Straight /4 1 /4 MT5-HLS18-( ) $39. $39. $ /4 1 /4 MT5-HLS24-( ) /4 1 /4 MT5-HLS30-( ) /4 1 /4 MT5-HLS36-( ) /4 1 /4 MT5-HLS42-( ) /4 1 /4 MT5-HLS48-( ) /4 1 /4 MT5-HLS60-( ) High-low dedicated width top cap - Post 17 1 /2 2 1 /4 1 /4 MT5-HLC18-( ) /2 2 1 /4 1 /4 MT5-HLC24-( ) /2 2 1 /4 1 /4 MT5-HLC30-( ) /2 2 1 /4 1 /4 MT5-HLC36-( ) /2 2 1 /4 1 /4 MT5-HLC42-( ) /2 2 1 /4 1 /4 MT5-HLC48-( ) /2 2 1 /4 1 /4 MT5-HLC60-( ) Panel Planning Example: MT5-HLC MT5 Top cap kit HLC Type 36 Panel width 612 Paint finish Specify finish for top cap. 81 For panels used in high-low configurations, order standard top cap/raceway cover kits on previous pages. Then order one dedicated width top cap for each of the lower panels in the high-low configuration. Install the standard raceway covers, but replace the standard top cap with the high-low top cap. Save the standard top cap for future reconfiguration. High-low top caps for straight configurations are used only with high-low straight connectors. High-low top caps for post configurations are used with all corner, T, or X high-low post assemblies.

82 PDC and multiple outlet covers description type w d h pattern no. painted Power, data, and communications (PDC) outlets 24 4 MT5-PDC-24-( ) $ MT5-PDC-30-( ) MT5-PDC-36-( ) MT5-PDC-42-( ) MT5-PDC-48-( ) MT5-PDC-60-( ) 46. Multiple power outlets Four outlets 48 4 MT5-EX48-( ) 39. Four outlets 60 4 MT5-EX60-( ) 46. Example: MT5-PDC M T5 Top cap PDC PDC raceway 48 Width 612 Finish Specify paint finish. 82 Specify PDC covers when planning voice/data outlets in a powered panel. PDC covers provide one protected opening for PDC modules 6 from each end of panel, in addition to standard power outlet openings. Specify multiple power outlet covers in addition to standard panel top cap/raceway cover kits, when planning more than two duplex outlets on a panel face. Multiple outlet covers have openings for four duplex outlets. Power, data and communications outlets covers cannot be used with panels produced prior to 1995; specify standard powered or multiple outlet covers and plan data/communications outlets in pass-through or non-powered panels. For Chicago code PDC covers, refer to page 102.

83 Stackable add-up panels upholstered description h w d pattern no First up panel on panels AY1-1618M-A( ) $439. $479. $487. $539. $595. $ AY1-1624M-A( ) AY1-1630M-A( ) AY1-1636M-A( ) AY1-1642M-A( ) AY1-1648M-A( ) AY1-1660M-A( ) ,006. 1, AY1-2518M-A( ) AY1-2524M-A( ) AY1-2530M-A( ) AY1-2536M-A( ) AY1-2542M-A( ) AY1-2548M-A( ) , AY1-2560M-A( ) ,129. 1,208. Panel Planning Next up panel on stackable add-up panels AY1-1618S-A( ) AY1-1624S-A( ) AY1-1630S-A( ) AY1-1636S-A( ) AY1-1642S-A( ) AY1-1648S-A( ) AY1-1660S-A( ) ,064. Example: AY1-1618M-A-15- W210/2 AY1 Stackable panel 16 Height 18 Width M Mounting kit A Surface type 15 Fabric group W210/2 Upholstery First suffix indicates application: M panels S Stackable add-up panels Surface type: A Tackable upholstered Specify fabric group: 10- Fabric group Fabric group Fabric group Fabric group Fabric group Fabric group 45 Fabric groups can be found on page 5. Upholstered panels may be ordered in a combination of fabrics. List price is the average of the two fabric grades. 83 For combinations of fabrics, list both suffixes (e.g. 20/40) and upholstery pattern numbers. Specify trim caps and connectors separately (see page 86). Stackable add-up panels provide adaptable privacy on panels. First up panels include top trim, edge trim in Currents trim grey and bayonet supports that bolt on to top of a panel. Next up panels include intermediate masts that engage into the sides of first up (or next up) panels of corresponding width. All stackable add-up panels may be removed without tools. Currents for end connector or end trim (page 78) must be specified when stacking over a panel in end condition. Top and edge trims are Currents trim grey.

84 Stackable add-up panels glazed description h w d pattern no. C T First up panel on panels AY1-1618M-W( )( ) $543. $ AY1-1624M-W( )( ) AY1-1630M-W( )( ) AY1-1636M-W( )( ) AY1-1642M-W( )( ) AY1-1648M-W( )( ) AY1-1660M-W( )( ) AY1-2518M-W( )( ) AY1-2524M-W( )( ) AY1-2530M-W( )( ) AY1-2536M-W( )( ) AY1-2542M-W( )( ) , AY1-2548M-W( )( ) 1,021. 1, AY1-2560M-W( )( ) 1,087. 1,193. Next up panel on stackable add-up panels AY1-1618S-W( )( ) AY1-1624S-W( )( ) AY1-1630S-W( )( ) AY1-1636S-W( )( ) AY1-1642S-W( )( ) AY1-1648S-W( )( ) AY1-1660S-W( )( ) Example: AY1-1636M-W-C-612 AY1 Stackable add-up 16 Height 36 Width M Mounting kit W Surface type C Glazing finish 612 Frame finish First suffix indicates application: M panels S Stackable add-up panels Second suffix indicates surface type: W Glazed For glazed panels specify: C- Clear tempered glass T- Translucent acrylic Specify trim caps and connectors separately (see page 86). 84 Stackable add-up panels provide adaptable privacy on panels. First up panels include top trim, edge trim in Currents trim grey and bayonet supports that bolt on to top of a panel. Next up panels include intermediate masts that engage into the sides of first up (or next up) panels of corresponding width. All stackable add-up panels may be removed without tools. Currents for end connector or end trim (page 78) must be specified when stacking over a panel in end condition. Top and edge trim are Currents trim grey.

85 Stackable add-up panels translucent and marker surface on both sides description h w d pattern no. TC M First up panel on panels AY1-1624M-( ) $894. $ AY1-1630M-( ) n/a AY1-1636M-( ) 1, AY1-1642M-( ) n/a AY1-1648M-( ) 1, AY1-1660M-( ) 1,501. n/a AY1-2524M-( ) AY1-2530M-( ) n/a AY1-2536M-( ) 1, AY1-2542M-( ) n/a AY1-2548M-( ) 1, AY1-2560M-( ) 1,576. n/a Panel Planning Next up panel on stackable add-up panels AY1-1624S-( ) AY1-1630S-( ) n/a AY1-1636S-( ) 1, AY1-1642S-( ) n/a AY1-1648S-( ) 1, AY1-1660S-( ) 1,485. n/a Example: AY M-TC AY1 Stackable add-up 16 Height 36 Width M Mounting kit TC Surface type First suffix indicates application: M panels S Stackable add-up panels Second suffix indicates surface type: TC Translucent fiberglass M Marker surface (both sides) Specify trim caps and connectors separately (see page 86). Stackable add-up panels provide adaptable privacy on panels. First up panels include top trim, edge trim in Currents trim grey and bayonet supports that bolt on to top of a panel. Next up panels include intermediate masts that engage into the sides of first up (or next up) panels of corresponding width. All stackable add-up panels may be removed without tools. Top and edge trim are Currents trim grey. Markerboard surface is non-metallic. Currents for end connector or end trim (page 78) must be specified when stacking over a panel in end condition. 85

86 Stackable add-up connectors and trim caps applications - first up description type w d h pattern no. list price Trim caps End cap AY1-CE $5. Straight cap 2 2 AY1 CS 5. Stackable first up connectors over panels - Corner AY1 ML16-( ) AY1 ML25-( ) 295. Stackable first up connectors over panels - T AY1 MT16-( ) AY1 MT25-( ) 376. Stackable first up connectors over panels - X AY1 MX AY1 MX Stackable first up connectors over panels - Straight post AY1 MP16-( ) AY1 MP25-( ) 295. Example: AY1 CS AY1 Stackable add-up CS Connector type Trim caps are Currents trim grey. Top caps for Stackable connectors over panels are Currents trim grey. Specify paint finish for Stackable connector vertical trims. 86 Trim caps are specified by application to fill top corners of stackable add-up panels. Straight cap aligns adjacent add-up panels. End cap finishes the end of the run of add-up panels. Stackable connectors join stackable add-up panels over a connector.

87 Stackable add-up connectors and trim caps applications - first up description type w d h pattern no. list price Masts for panel (replacement part) AY1-MMK $58. Panel Planning Example: AY1 CS AY1 Stackable add-up CS Connector type Trim caps are Currents trim grey. Top caps for Stackable connectors over panels are Currents trim grey. Specify paint finish for Stackable connector vertical trims. 87 Trim caps are specified by application to fill top corners of stackable add-up panels. Straight cap aligns adjacent add-up panels. End cap finishes the end of the run of add-up panels. Stackable connectors join stackable add-up panels over a connector.

88 Stackable add-up connectors and trim caps applications - next up description type w d h pattern no. list price Trim caps End cap AY1-CE $5. Straight cap 2 2 AY1 CS 5. Stackable next up connectors Corner AY1 SML16-( ) 226. Straight post AY1 SMP16-( ) 226. T AY1 SMT16-( ) 280. X AY1 SMX16-( ) 335. (X shown) High/low adapter kit AY1-HLA 72. Stacking hardware kit (replacement part) AY1-SMK 41. Example: AY1 CS AY1 CS Stackable add-up Connector type Trim caps are Currents trim grey. Top caps for Stackable connectors over panels are Currents trim grey. Specify paint finish for Stackable connector vertical trims. Trim caps are specified by application to fill top corners of stackable add-up panels. Straight cap aligns adjacent add-up panels. End cap finishes the end of the run of add-up panels. Stackable connectors join stackable add-up panels over a connector. High-low adapter kit includes an end cap and a bayonet with attachment holes to join stackable add-up panels in a straight high-low configuration. The kit also adapts a corner T or X post for high-low configurations. Next up connectors correspond to next up panels. 88

89 Power distribution components 2+2 Raceway four circuit, eight-wire raceway for panels power rails description type w d h pattern no. list price Power rail for panel base 24 w MR3-E24 $ w MR3-E30NS w MR3-E36NS w MR3-E42NS w MR3-E48NS w MR3-E60NS 213. Multiple outlet power rails 48 w MR3-E w MR3-E Panel Planning Power rail for vertical raceway MR3-EVR 425. Data Shield 1 pair MR3-DATSHD 29. Example: MR3-E48-4 MR3 E Eight wire For 48 panel 4 Multiple outlets 2 +2 Raceway is a four-circuit, eight-wire modular power distribution system, for use in panels and Network desk supports.2+2 Raceway components distribute two 20-amp convenience circuits (A and B), with neutral and ground, and two protected 20-amp circuits (X and Y) with separate neutral and ground. 89 Power rails are the primary power distribution component of the 2 + 2Raceway. Each rail provides outlet mounting positions on both sides, and receptacles for two branching power connectors at each end. Center supports permit lay-in cabling from either side of the raceway. Rail for 24 wide panel accepts one duplex outlet or power infeed centered on each side. Rails for 30 and wider panels accept two outlets (or one outlet and one infeed) each side, 12 from either end of the panel. Multiple outlet power rails accept up to four duplex outlets each side. Power rail for vertical raceway accepts up to four duplex outlets each side, two above and two below standard worksurface height. Power rail for vertical raceway includes power connector from adjacent powered panel base. If separation of cabling and electrical wires is required, a data shield can be attached below the power rail. Data shields are field installed.

90 Power distribution components 2+2 Raceway four circuit, eight-wire raceway for panels connectors and jumpers description type w d h pattern no. list price Power connector Straight MR3-EPCM $87. Post MR3-EPCPM 87. Jumper 6 panel MR3-EJ panel MR3-EJ panel MR3-EJ panel MR3-EJ panel MR3-EJ panel MR3-EJ panel MR3-EJ panel MR3-EJ panel run MR3-EJ54P panel MR3-EJ60P panel run MR3-EJ66P panel run MR3-EJ72P panel run MR3-EJ78P panel run MR3-EJ84P panel run MR3-EJ90P panel run MR3-EJ96P 213. Extended jumper 6 + post MR3-EJ6P post+6 panel MR3-EJ12P post MR3-EJ18P post MR3-EJ24P post MR3-EJ30P post MR3-EJ36P post MR3-EJ42P post MR3-EJ48P 150. Example: MR3-EPC MR3 raceway E Eight wire P Power infeed C Straight 2 +2 Raceway is a four-circuit, eight-wire modular power distribution system, for use in panels and Network desk supports.2+2 Raceway components distribute two 20-amp convenience circuits (A and B), with neutral and ground, and two protected 20-amp circuits (X and Y) with separate neutral and ground. Power connectors are enclosed in steel flexible conduit. 90 Jumpers connect rails on either side of a panel or panels without outlets. Extended jumpers for panels less than 60 wide (suffix -P) transmit power through an adjacent L, T or X post connection. Jumpers for wider panel runs accommodate an intermediate post connection. Also specify extended jumper when connecting between vertical raceway power rail and a panel base power rail on either side of a panel or panels without outlets. Power connectors transmit power between adjacent powered panels. Specify straight power connector for straight connections, and post power connector for L, T or X post connections.

91 Power distribution components 2+2 Raceway four circuit, eight-wire raceway for panels outlets and infeeds description type pattern no. list price Duplex outlets, black Circuit A MR3-DA $39. Circuit B MR3-DB 39. Circuit X MR3-DX 39. Circuit Y MR3-DY 39. Duplex outlets, orange Circuit X MR3-DXO 46. Circuit Y MR3-DYO 46. Duplex outlets, black with orange triangle Circuit X MR3-DXT 46. Circuit Y MR3-DYT 46. Panel Planning Power infeeds - Panel base (reversible) panel base MR3-ERPI 261. SF MR3-EPSF 261. Power infeeds - Ceiling external power pole MR3-EPIC 300. vertical raceway MR3-EPVR 261. Power infeeds - hardwire NYC - one direction MR3-EPNY NYC - two directions MR3-EPNY Example: MR3-EPVR MR3 raceway E Eight wire P Power infeed VR For vertical raceway 2 +2 Raceway is a four-circuit, eight-wire modular power distribution system, for use in panels and Network desk supports.2+2 Raceway components distribute two 20-amp convenience circuits (A and B), with neutral and ground, and two protected 20-amp circuits (X and Y) with separate neutral and ground. Duplex outlets are preconfigured to access one of the four circuits, A, B, X, Y, and snap into any standard outlet location (12 from either end of panel). Duplexes on circuits X and Y may be specified with orange face or black face with orange triangle to signify protected circuits for electronic equipment. Power infeeds connect building power supply to a cluster of interconnected power rails. Panel base infeed snaps into any outlet position in rail, 12 from either side of panel, and includes 6 foot liquid-tight conduit and pigtail for connection to floor or wall electrical box. MR3-ERPI Panel Base Infeed rotates to provide either a left- or right-hand power entry. Ceiling infeeds include 12-6 pigtail for connection into panel base through vertical raceway and ceiling infeed panel, or through standard power pole (supplied by others) adjacent to panel with power rail. Hardwire infeed, used in all New York City installations, includes junction box that mounts within non-powered panel base (any width 24 or greater). Electrical contractor supplies conduit from building power supply to panel, punches infeed hole in raceway cover, and trims power connectors to length. MR3-EPNY2 includes two power connectors to power panels on both sides of infeed panel; MR3-EPNY1 includes only one power connector. Template is included to modify standard N-type raceway cover (without outlet openings). Power infeed for Panel base for San Francisco installations have a liquid-tight sleeve over a metallic flexible conduit. 91

92 Power distribution components 2+2 Raceway four circuit, eight-wire raceway for panels accessories description type pattern no. list price Desktop power module From panel base MR3-NESP $379. Hardwire MR3-NESH 300. Grommet outlet module Directly above panel outlet MR3-EGM 425. Duplex outlet, circuit A MR1-DA 32. Duplex outlet, circuit B MR1-DB 32. Hardwire MR3-EGMH 314. Up to 24 away from panel outlet MR3-EGM Contact protectors (set of 10) MR3-CP 11. Wire manager clips (10) Under worksurface MR1-WC 35. High capacity wire managers (10) Panel connector ML1-HCWM Example: MR3-NESP MR3 raceway N Network E Eight wire S Stanchion outlet P Power feed 2 +2 Raceway is a four-circuit, eight-wire modular power distribution system, for use in panels and Network desk supports.2+2 Raceway components distribute two 20-amp convenience circuits (A and B), with neutral and ground, and two protected 20-amp circuits (X and Y) with separate neutral and ground. Duplex outlet circuits are designated by white letters on black background. 92 Desktop power module is power component for desktop power monument or overhead support stanchion. Power module includes two duplex outlets and power connector. Grommet outlet module stands in any (not Options) worksurface grommet for convenient access. Grommet outlet module accepts only special duplexes (MR1-DA or MR1-DB) on circuits A or B. Contact protectors enclose open conductors on power rail wherever outlets or power connectors are not planned. Wire manager clips are included with worksurfaces with grommets. High capacity wire manager fastens at any panel connection. Hinged flap contains 1 x3 data/communications cables.

93 Power distribution components 3+3 Raceway six circuit, ten-wire raceway for panels power rails, connectors and outlets description type w d h pattern no. list price Power rail for panel base 24 w MR3-T24 $ w MR3-T30NS w MR3-T36NS w MR3-T42NS w MR3-T48NS w MR3-T60NS 244. Multiple outlet power rail 48 w MR3-T w MR3-T Panel Planning Power rail for vertical raceway MR3-TVR 504. Power connector Straight MR3-TPCM 111. Through post MR3-TPCPM 111. Duplex outlets, black Circuit A MR3-DA 39. Circuit B MR3-DB 39. Circuit C MR3-DC 39. Circuit X MR3-DX 39. Circuit Y MR3-DY 39. Circuit Z MR3-DZ 39. Duplex outlets, orange Circuit X MR3-DXO 46. Circuit Y MR3-DYO 46. Circuit Z MR3-DZO 46. Example: MR3-T-24 MR3 raceway T Tenwire For 24 panel 3 +3 Raceway is a six-circuit, ten-wire modular power distribution system, for use in panels and Network desk supports.3+3 Raceway components distribute three 20-amp convenience circuits (A, B, C), with neutral and ground, and three protected 20-amp circuits (X, Y, Z) with separate neutral and ground. A, B, X, Y outlets are identical to eight wire, 2+2 components. Duplex outlet circuits are designated by white letters on black background. 93 Power rails are the primary power distribution component of the 3 + 3Raceway. Each rail provides outlet mounting positions on both sides, and receptacles for branching power connectors at each end. Center supports permit lay-in cabling from either side of the raceway. Rail for 24 wide panel accepts one duplex outlet or power infeed on either side. Rails for 30 and wider panels accept two outlets each side, 12 from either end of the panel. Power rail for Vertical Raceway panel accepts up to four duplex outlets each side, two above and two below standard worksurface height. Power connectors transmit power between adjacent powered panels. Specify straight power connector for straight connections, and post power connector for L, T or X post connections. Duplex outlets are preconfigured to access one of the six circuits, A, B, C, X, Y, Z, and snap into any standard outlet location (12 from either end of panel). Duplexes on circuits X, Y, and Z may be specified with an orange face, or black face with orange triangle to signify protected circuits for electronic equipment; all other duplexes are black. If separation of cabling and electrical wires is required, a data shield can be attached below the power rail. Data shields are field installed.

94 Power distribution components 3+3 Raceway six circuit, ten-wire raceway for panels power rails, connectors and outlets description type w d h pattern no. list price Data Shield 1 pair MR3-DATSHD $29. Duplex outlets, black with orange triangle Circuit X MR3-DXT 46. Circuit Y MR3-DYT 46. Circuit Z MR3-DZT 46. Example: MR3-T-24 MR3 raceway T Tenwire For 24 panel 3 +3 Raceway is a six-circuit, ten-wire modular power distribution system, for use in panels and Network desk supports.3+3 Raceway components distribute three 20-amp convenience circuits (A, B, C), with neutral and ground, and three protected 20-amp circuits (X, Y, Z) with separate neutral and ground. A, B, X, Y outlets are identical to eight wire, 2+2 components. Duplex outlet circuits are designated by white letters on black background. 94 Power rails are the primary power distribution component of the 3 + 3Raceway. Each rail provides outlet mounting positions on both sides, and receptacles for branching power connectors at each end. Center supports permit lay-in cabling from either side of the raceway. Rail for 24 wide panel accepts one duplex outlet or power infeed on either side. Rails for 30 and wider panels accept two outlets each side, 12 from either end of the panel. Power rail for Vertical Raceway panel accepts up to four duplex outlets each side, two above and two below standard worksurface height. Power connectors transmit power between adjacent powered panels. Specify straight power connector for straight connections, and post power connector for L, T or X post connections. Duplex outlets are preconfigured to access one of the six circuits, A, B, C, X, Y, Z, and snap into any standard outlet location (12 from either end of panel). Duplexes on circuits X, Y, and Z may be specified with an orange face, or black face with orange triangle to signify protected circuits for electronic equipment; all other duplexes are black. If separation of cabling and electrical wires is required, a data shield can be attached below the power rail. Data shields are field installed.

95 Power distribution components 3+3 Raceway six circuit, ten-wire raceway for panels power infeeds description type w d h pattern no. list price Power infeeds - Panel base (reversible) SF MR3-TPSF $300. Panel base MR3-TRPI 300. Ceiling infeed external power pole MR3-TPIC 366. vertical raceway MR3-TPVR 300. Panel Planning Harwire infeed NYC - one direction MR3-TPNY NYC - two directions MR3-TPNY Example: MR3-TPVR MR3 raceway T Tenwire3+3 P Power infeed VR For vertical raceway 3 +3 Raceway is a four-circuit, eight-wire modular power distribution system, for use in panels and Network desk supports.3+3 Raceway components distribute three 20-amp convenience circuits (A, B, C), with neutral and ground, and three protected 20-amp circuits (X, Y, Z) with separate neutral and ground. 95 Power infeeds connect building power supply to a cluster of interconnected power rails. Panel base infeed snaps into any outlet position in rail, 12 from either side of panel, and includes 6 foot liquid-tight conduit and pigtail for connection to floor or wall electrical box. MR3-TRPI Panel Base Infeed rotates to provide either a left- or right-hand power entry. Ceiling infeeds include 12-6 pigtail for connection into panel base through vertical raceway and ceiling infeed panel, or through standard power pole (supplied by others) adjacent to panel with power rail. Hardwire infeed, used in all New York City installations, includes junction box that mounts within non-powered panel base (any width 24 or greater). Electrical contractor supplies conduit from building power supply to panel, punches infeed hole in raceway cover, and trims power connectors to length. MR3-TPNY2 includes two power connectors to power panels on both sides of infeed panel; MR3-TPNY1 includes only one power connector. Template is included to modify standard N-type raceway cover (without outlet openings). Power infeed for panel base for San Francisco installations have a liquid-tight sleeve over a metallic conduit.

96 Power distribution components 3+3 Raceway six circuit, ten-wire raceway for panels jumpers description type w d h pattern no. list price Jumper 18 panel MR3-TJ18 $ panel MR3-TJ panel MR3-TJ panel MR3-TJ panel MR3-TJ panel MR3-TJ panel run MR3-TJ54P panel MR3-TJ panel MR3-TJ60P desk MR3-TJ66P panel run MR3-TJ72P desk MR3-TJ78P panel run MR3-TJ84P panel run MR3-TJ90P panel run MR3-TJ96P 254. Extended jumper 18 + post MR3-TJ18P post MR3-TJ24P post MR3-TJ30P post MR3-TJ36P post MR3-TJ42P post MR3-TJ48P post MR3-TJ6P post+6 panel MR3-TJ12P 118. Power connector Crossover MR3-TJ Example: MR3-TJ30 MR3 raceway T Tenwire3+3 J Jumper 30 Type 3 +3 Raceway is a four-circuit, eight-wire modular power distribution system, for use in panels and Network desk supports.3+3 Raceway components distribute three 20-amp convenience circuits (A, B, C), with neutral and ground, and three protected 20-amp circuits (X, Y, Z) with separate neutral and ground. 96 Jumpers connect rails on either side of a panel or panels without outlets. Extended jumpers for panels less than 60 wide (suffix -P) transmit power through an adjacent L, T or X post connection. Jumpers for wider panel runs accommodate an intermediate post connection. Also specify extended jumper when connecting between vertical raceway power rail and a panel base power rail on either side of a panel or panels without outlets.

97 Power distribution components PDC Components description type pattern no. list price PDC module extension kit Set of 10 MR3-PDC-X $138. PDC blank filler Set of 10 MN2-OF 40. Under worksurface PDC mounting bracket MR3-UW-PDC 87. Panel Planning Example: MR3-UW-PDC MR3 raceway UW Position PDC Application PDC module extension kit is 1 /2 spacer between module and raceway cover, providing more depth for cables and connections inside raceway. PDC blank filler is black textured cover for unused outlet openings. Under worksurface PDC bracket mounts anywhere under a worksurface to support two PDC modules with faceplate. 97

98 Power distribution components PDC Raceway Terminator and outlets description type w d h pattern no. list price PDC terminator MA1-PDC-T $52. Terminator adapter for ATT outlets MA1-TATT MA1-TATT3 29. Example: MA1-PDC-T MA1 Access PDC Application T Terminator Terminator is textured black plastic. 98 Terminator is two-part molded plastic housing for data and communications outlets. Terminator protects outlets and improves access to connections. Terminator adheres to raceway over PDC outlet opening or subway. Separate outlet components fit only the Terminator, which includes a faceplate with two outlet openings. Other outlet combinations are available on special request.

99 Power distribution components Ported panel data port, outlets, raceway connectors description type pattern no. list price Floating data port kit MR3-FDP $54. Vertical power port bracket kit MR3-VPBK 91. Vertical duplex outlet Black Circuit A MR3-VDA 39. Circuit B MR3-VDB 39. Circuit C MR3-VDC 39. Circuit X MR3-VDX 39. Circuit Y MR3-VDY 39. Circuit Z MR3-VDZ 39. Panel Planning Vertical duplex outlet Orange Circuit X MR3-VDXO 46. Circuit Y MR3-VDYO 46. Circuit Z MR3-VDZO 46. Vertical duplex outlet Black with Orange triangle Circuit X MR3-VDXT 46. Circuit Y MR3-VDYT 46. Circuit Z MR3-VDZT raceway connectors Base of adjacent panel to far side of 18,24 W MR3-EV24 PC 143. panel Base of adjacent panel to far side of 30,36 W MR3-EV36 PC 159. panel Base of adjacent panel to far side of 42,48 W MR3-EV48 PC 172. panel Base of same panel, adjacent panel to near side MR3-EVB PC 131. Internal jumper to same circuit outlet MR3-EVI J 143. Example: MR3-VPBK MR3 VP Application BK Bracket kit Ported panel electrical components connect to 2+2, four circuit and 3+3, six-circuit raceway components to deliver worksurface-height outlets within the ported panel frame. Floating data port allows data and communication outlets to be mounted at any location on the ported panel face except directly above or below electrical outlets. Floating data ports include front and back mounting plates. PDC modules ( faceplates and outlets ) are specified separately. Vertical power and data ports for ported panel are black finish and require field cutting the panel insert for installation. Vertical power port bracket kit includes an outlet mounting bracket, a cover mounting bracket and cover plate. Outlet mounting bracket attaches to vertical rails of panel frame. Vertical duplex outlets are dedicated for ported panel application and are preconfigured to access the circuit indicated by the letter on the outlet face. All outlets are black with white letters. Outlets for circuits X,Y and Z are available with orange face and black face with orange triangle to signify protected circuits for electronic equipment. Base raceway duplex outlets will not work in vertical port applications. Vertical duplex outlets are one-sided only and must be ordered separately from the bracket kit. Ported panel connectors power vertical duplex outlets by joining them to the base raceway of the same or adjacent panel. MR3-TVB PC connects a base raceway rail with a vertical duplex outlet in the same panel or mounted on the near side of the adjacent ported panel. MR3-TV24, 36, 48 PC connect a base raceway rail with a vertical duplex outlet mounted on the far side of, respectively, 18-24, 30-36,or42-48 wide ported panels. MR3-EVI J connects two vertical duplex outlets of the same circuit inside the ported panel frame. Based on connector lengths, the intended location of the centerline of the vertical duplex outlet is 32 from the floor. 99

100 Power distribution components Ported panel data port, outlets, raceway connectors description type pattern no. list price raceway connectors Base of adjacent panel to far side of 18,24 W MR3-TV24 PC $166. panel Base of adjacent panel to far side of 30,36 W MR3-TV36 PC 193. panel Base of adjacent panel to far side of 42,48 W MR3-TV48 PC 206. panel Base of same panel, adjacent panel to near side MR3-TVB PC 143. Internal jumper to same circuit outlet MR3-TVI J 159. Example: MR3-VPBK MR3 VP Application BK Bracket kit Ported panel electrical components connect to 2+2, four circuit and 3+3, six-circuit raceway components to deliver worksurface-height outlets within the ported panel frame. Floating data port allows data and communication outlets to be mounted at any location on the ported panel face except directly above or below electrical outlets. Floating data ports include front and back mounting plates. PDC modules ( faceplates and outlets ) are specified separately. Vertical power and data ports for ported panel are black finish and require field cutting the panel insert for installation. Vertical power port bracket kit includes an outlet mounting bracket, a cover mounting bracket and cover plate. Outlet mounting bracket attaches to vertical rails of panel frame. Vertical duplex outlets are dedicated for ported panel application and are preconfigured to access the circuit indicated by the letter on the outlet face. All outlets are black with white letters. Outlets for circuits X,Y and Z are available with orange face and black face with orange triangle to signify protected circuits for electronic equipment. Base raceway duplex outlets will not work in vertical port applications. Vertical duplex outlets are one-sided only and must be ordered separately from the bracket kit. Ported panel connectors power vertical duplex outlets by joining them to the base raceway of the same or adjacent panel. MR3-TVB PC connects a base raceway rail with a vertical duplex outlet in the same panel or mounted on the near side of the adjacent ported panel. MR3-TV24, 36, 48 PC connect a base raceway rail with a vertical duplex outlet mounted on the far side of, respectively, 18-24, 30-36,or42-48 wide ported panels. MR3-EVI J connects two vertical duplex outlets of the same circuit inside the ported panel frame. Based on connector lengths, the intended location of the centerline of the vertical duplex outlet is 32 from the floor. 100

101 Power distribution 2+2 Raceway hardwire raceway components description type pattern no. list price Power infeed kit Hardwire, Chicago MR2-PICHI $330. Hardwire receptacles kit for panel base 24 W MR2-CHI W MR2-CHI W MR2-CHI W MR2-CHI W MR2-CHI W MR2-CHI Panel Planning Bridge connector Straight connections only MR2-CHI-PT 25. Hardwire outlet box for stanchion or desktop monument MR2-NS-CHI 64. Hardwire receptacles kit for vertical raceway panel, two outlets above and two below worksurface 42 H, 56 H, 64 H, 74 H panel MR2-RVR42-H4( ) H panel MR2-RVR48-H4( ) 332. Hardwire receptacles kit for vertical raceway panel, two outlets above worksurface 42 H, 56 H, 64 H, 74 H panel MR2-RVR42-H2( ) H panel MR2-RVR48-H2( ) 268. Example: MR2-CHI-24 MR2 Power component CHI Chicago hardwire 24 Panel width Hardwire raceway components are approved for use in City of Chicago installations. 101 Hardwire infeed and receptacles kits are field-installed in any vertical panel base wider than 18. Hardwire infeed consists of code-approved electrical box with mounting bracket. Electrical contractor supplies watertight conduit from building power supply to panel base, punches infeed hole in standard non-powered raceway cover, and supplies flexible conduit for all panel-to-panel power connections. Receptacles kit includes full width cable tray, forming a continuous steel septum between power and data/telecommunications cables. Receptacles kits and hardwire covers accommodate standard Decora-type architectural duplex outlets on one or both sides, 12 from each end of panel. Hardwire outlet openings are in the same position as 2+2 modular raceway outlets. Top cap and raceway cover kits for hardwire raceway include two screws to enclose cable tray as code-approved electrical box. Bridge connector mechanically connects adjacent receptacles kits, eliminating flexible conduit between hardwired panels in a straight connection. Hardwire components do not include wire, outlets, cable conduit, or fittings. Hardwire receptacles kits for vertical raceway panel include face covers.

102 Power distribution hardwire raceway components description type w d h pattern no. Paint PV1 PV2 Top cap and raceway cover kits, hardwire With outlet plates 24 4 MT6-E24-( )( )-CHI $10. $10. $ MT6-E30-( )( )-CHI MT6-E36-( )( )-CHI MT6-E42-( )( )-CHI MT6-E48-( )( )-CHI MT6-E60-( )( )-CHI PDC raceway cover with hardwire outlet openings 24 4 MT6-PDC24-( )( )-CH MT6-PDC30-( )( )-CH MT6-PDC36-( )( )-CH MT6-PDC42-( )( )-CH MT6-PDC48-( )( )-CH MT6-PDC60-( )( )-CH 47. Example: MT6-E CHI MT6 Top cap/covers E Powered 24 Width 612 Top cap finish 612 Raceway finish CHI Chicago hardware Specify finish for top cap and raceway cover. For combinations of wood top caps with hardwire raceway covers, insert top cap finish before raceway cover finish. Hardwire raceway components are approved for use in City of Chicago installations. Receptacles kits and hardwire covers accommodate standard Decora-type architectural duplex outlets on one or both sides, 12 from each end of panel. Hardwire outlet openings are in the same position as 2+2 modular raceway outlets. Top cap and raceway cover kits for hardwire raceway include two screws to enclose cable tray as code-approved electrical box. 102

103 Worksurfaces, 1 3 /4 18 D description type w d h pattern no. lam. V1 V2 Straight, 18 D No grommets /8 1 3 /4 MW2-S3018-B-( ) $347. $509. $ /8 1 3 /4 MW2-S3618-B-( ) /8 1 3 /4 MW2-S4218-B-( ) /8 1 3 /4 MW2-S4818-B-( ) /8 1 3 /4 MW2-S5418-B-( ) , /8 1 3 /4 MW2-S6018-B-( ) , /8 1 3 /4 MW2-S6618-B-( ) , /8 1 3 /4 MW2-S7218-B-( ) ,305. Worksurface Planning Example: MW2-S3618-B-117 MW2 Worksurface 1 3 /4 thick S Worksurface type 36 Width 18 Depth B No grommets 117 Surface finish B: Worksurface does not include grommets Specify surface finish All worksurfaces are U.L.-listed. 18 D worksurfaces are used interchangeably in desk and panel system applications as shallow main surfaces, extensions, or credenza tops. They must be supported at each end by a pedestal, end panel, end support cantilever or cantilever bridging bracket with a maximum span of 60 between supports. All worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. All worksurfaces have threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. MW2- worksurfaces are supported by brackets with machine screws. Panel supported worksurfaces over 60 must be mid-span supported by MB2-C18 bracket, specified separately. 18 D worksurfaces with desk supports or filler panels do not accept pedestals. 103

104 Worksurfaces, 1 3 /4 24 D description type w d h pattern no. lam. V1 V2 Straight, 24 D Grommets /8 1 3 /4 MW2-S2424-A-( ) $421. $634. $ /8 1 3 /4 MW2-S3024-A-( ) /8 1 3 /4 MW2-S3624-A-( ) /8 1 3 /4 MW2-S4224-A-( ) , /8 1 3 /4 MW2-S4824-A-( ) , /8 1 3 /4 MW2-S5424-A-( ) , /8 1 3 /4 MW2-S6024-A-( ) , /8 1 3 /4 MW2-S6624-A-( ) ,003. 1, /8 1 3 /4 MW2-S7224-A-( ) ,089. 1, /8 1 3 /4 MW2-S7824-A-( ) ,178. 1, /8 1 3 /4 MW2-S8424-A-( ) ,265. 1, /8 1 3 /4 MW2-S9024-A-( ) ,371. 1, /8 1 3 /4 MW2-S9624-A-( ) 1,066. 1,511. 2,110. Straight, 24 D - No grommets No grommets /8 1 3 /4 MW2-S2424-B-( ) /8 1 3 /4 MW2-S3024-B-( ) /8 1 3 /4 MW2-S3624-B-( ) /8 1 3 /4 MW2-S4224-B-( ) /8 1 3 /4 MW2-S4824-B-( ) , /8 1 3 /4 MW2-S5424-B-( ) , /8 1 3 /4 MW2-S6024-B-( ) , /8 1 3 /4 MW2-S6624-B-( ) , /8 1 3 /4 MW2-S7224-B-( ) ,018. 1, /8 1 3 /4 MW2-S7824-B-( ) ,104. 1, /8 1 3 /4 MW2-S8424-B-( ) ,192. 1, /8 1 3 /4 MW2-S9024-B-( ) ,300. 1, /8 1 3 /4 MW2-S9624-B-( ) ,439. 2, D worksurfaces are used interchangeably as shallow main surfaces,extensions or credenza tops. They must be supported at each end by a pedestal, end panel, end support cantilever or cantilever bridging bracket with a maximum span of 60 between supports. All worksurfaces have threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. MW2- worksurfaces are supported by brackets with machine screws. Use 18 D pedestals with 24 D worksurfaces for full wire management capability in desk or panel applications. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. Example: MW2-S7224-A-117 MW2 Worksurface, 1 3 /4 thick S Straight worksurface 72 Width 24 Depth A Grommets 117 Surface finish Grommets/no grommets: A- Worksurfaces include 3 grommet in each back corner leading into desk support or wire manager. B- Worksurface does not include grommets. Specify surface finish All worksurfaces are U.L.-listed. Plastic laminate worksurfaces are post-formed top and bottom, front and back. Worksurfaces with grommets are bored to accept and are shipped with wire manager clips. Panel supported worksurfaces over 60 must be mid-span supported by MB2-C18 bracket, specified separately. 104

105 Worksurfaces, 1 3 /4 30 D description type w d h pattern no. lam. V1 V2 Straight, 30 D Grommets /8 1 3 /4 MW2-S3030-A-( ) $507. $705. $ /8 1 3 /4 MW2-S3630-A-( ) , /8 1 3 /4 MW2-S4230-A-( ) , /8 1 3 /4 MW2-S4830-A-( ) , /8 1 3 /4 MW2-S5430-A-( ) , /8 1 3 /4 MW2-S6030-A-( ) ,003. 1, /8 1 3 /4 MW2-S6630-A-( ) ,073. 1, /8 1 3 /4 MW2-S7230-A-( ) ,178. 1, /8 1 3 /4 MW2-S7830-A-( ) ,284. 1, /8 1 3 /4 MW2-S8430-A-( ) ,389. 1, /8 1 3 /4 MW2-S9030-A-( ) 1,084. 1,526. 2, /8 1 3 /4 MW2-S9630-A-( ) 1,186. 1,668. 2,376. Straight 30 D - no grommets No grommets /8 1 3 /4 MW2-S3030-B-( ) /8 1 3 /4 MW2-S3630-B-( ) /8 1 3 /4 MW2-S4230-B-( ) , /8 1 3 /4 MW2-S4830-B-( ) , /8 1 3 /4 MW2-S5430-B-( ) , /8 1 3 /4 MW2-S6030-B-( ) , /8 1 3 /4 MW2-S6630-B-( ) ,001. 1, /8 1 3 /4 MW2-S7230-B-( ) ,104. 1, /8 1 3 /4 MW2-S7830-B-( ) ,213. 1, /8 1 3 /4 MW2-S8430-B-( ) ,315. 1, /8 1 3 /4 MW2-S9030-B-( ) 1,009. 1,453. 2, /8 1 3 /4 MW2-S9630-B-( ) 1,109. 1,592. 2,306. Worksurface Planning Example: MW2-S4230A-117 MW2 Worksurface, 1 3 /4 thick S Straight worksurface 42 Width 30 Depth A Grommets 117 Surface finish Grommets/no grommets: A- worksurface includes 3 grommet in each back corner leading into desk support or wire manager clips. B- worksurface does not include grommets Specify surface finish. All worksurfaces are U.L.-listed D worksurfaces are used interchangeably in desk and panel system applications as main surfaces, extensions or credenza tops. They must be supported at each end by a pedestal, end panel, end support cantilever or cantilever bridging bracket with a maximum span of 60 between supports. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. MW2- worksurfaces are supported by brackets with machine screws. Panel supported worksurfaces over 60 must be mid-span supported by MB2-C18 bracket, specified separately. Plastic laminate worksurfaces are post-formed top and bottom, front and back.

106 Worksurfaces, 1 3 /4 36 D description type w d h pattern no. lam. V1 V2 Straight, 36 D Recessed grommets /8 1 3 /4 MW2-S6636-R-( ) $941. $1,265. $1, /8 1 3 /4 MW2-S7236-R-( ) ,371. 1, /8 1 3 /4 MW2-S7836-R-( ) 1,084. 1,494. 2,054. Straight 36 D - no grommets No grommets /8 1 3 /4 MW2-S6636-B-( ) ,192. 1, /8 1 3 /4 MW2-S7236-B-( ) ,300. 1, /8 1 3 /4 MW2-S7836-B-( ) 1,009. 1,422. 1,984. Example: MW2-S6636R-117 MW2 Worksurface, 1 3 /4 thick S Straight worksurface 66 Width 36 Depth R Grommets 117 Surface finish Grommets/no grommets: B- worksurface does not include grommets R- worksurface includes 3 grommets recessed for use with 6 recessed desk support. Specify surface finish. All worksurfaces are U.L.-listed D desks may be planned with 6 recessed desk support and 24 D pedestals or end panels, or 29 or 35 W universal end panels with kneehole filler. 36 D worksurfaces do not accept privacy screens. Plastic laminate worksurfaces are post-formed top and bottom, front and back. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. MW2- worksurfaces are supported by brackets with machine screws. Panel supported worksurfaces over 60 must be mid-span supported by MB2-C18 bracket, specified separately.

107 Worksurfaces, 1 3 /4 VDT corners description type w d h pattern no. lam. V1 V2 Corner Corner grommet only 35 5 / /8 1 3 /4 MW2-V3618-A-( ) $893. $1,119. $1,579. Corner grommet only 35 5 / /8 1 3 /4 MW2-V3624-A-( ) ,135. 1,616. Corner grommet only 41 5 / /8 1 3 /4 MW2-V4224-A-( ) ,189. 1,684. Corner grommet only 41 5 / /8 1 3 /4 MW2-V4230-A-( ) 1,017. 1,258. 1,787. Corner grommet only 47 5 / /8 1 3 /4 MW2-V4824-A-( ) 1,136. 1,358. 1,984. Corner grommet only 47 5 / /8 1 3 /4 MW2-V4830-A-( ) 1,190. 1,463. 2,087. Corner - 3 grommets 3 grommets 35 5 / /8 1 3 /4 MW2-V3624-C-( ) 1,003. 1,210. 1, / /8 1 3 /4 MW2-V4224-C-( ) 1,035. 1,261. 1, / /8 1 3 /4 MW2-V4230-C-( ) 1,089. 1,329. 1, / /8 1 3 /4 MW2-V4824-C-( ) 1,207. 1,432. 2, / /8 1 3 /4 MW2-V4830-C-( ) 1,264. 1,538. 2,160. Worksurface Planning Example: MW2-V4830-C-117 MW2 Worksurface, 1 3 /4 thick V VDT corner 48 Width 30 Depth of return C Three grommets 117 Surface finish Grommets/no grommets: A- VDT corner includes 3 grommet in back corner. C- VDT corner includes 3 grommet in all three back corners. Specify surface finish. VDT worksurfaces have threaded metal inserts at all desk support and bracket locations. MW2- worksurfaces are supported by brackets with machine screws. All worksurfaces are U.L.-listed. 107 All VDT corner worksurfaces are bored to accept and are shipped with wire manager clips. VDT corners may be used interchangeably in desk and panel system applications. They must be supported by VDT support brackets on each back edge or cantilever bridging brackets on each side edge and a cantilever bracket on the back corner. 36 Wx18 D VDT corners accept 18 D returns, 36,42, and 48 Wx 24 D VDT corners accept 24 D returns, 42 and 48 Wx30 D VDT corners accept 30 D returns. VDT corners are 3 /8 less than nominal depth for rear wire clearance or privacy screens. Plastic laminate worksurfaces are post-formed on front and back edges. 48 x24 VDT corners have an inside radius, T-mold front edge that curves into an optimal 45 straight keyboard location.

108 Worksurfaces, 1 3 /4 rounded end, 30 D description w d h pattern no. paint lam. V1 V2 30 D - Recessed grommets /4 MW2-R6330R( )(L/R) $1,393. $1,827. $2, /4 MW2-R7530R( )(L/R) 1,447. 1,899. 2, /4 MW2-R8730R( )(L/R) 1,549. 1,968. 2, D - End grommets /4 MW2-R6330E( ) 1,393. 1,827. 2, /4 MW2-R7530E( ) 1,447. 1,906. 2, /4 MW2-R8730E( ) 1,549. 1,968. 2, D - No grommets /4 MW2-R6330B( )(L/R) 1,316. 1,753. 2, /4 MW2-R7530B( )(L/R) 1,370. 1,824. 2, /4 MW2-R8730B( )(L/R) 1,474. 1,896. 2,718. Support column 5 27 MM2-L26( ) 170. Example: MW2-R8730E-117 MW2 Worksurface, 1 3 /4 thick R Rounded end 87 Width 30 Depth E End grommets 117 Surface finish Grommets/no grommets: B- worksurface does not include grommets. E- rounded end worksurface includes 3 grommet in each straight end corner. R- rounded end worksurface includes 3 grommets recessed for use with 6 recessed desk support. Specify surface finish. Rounded end worksurfaces with recessed or no grommets are specified left or right to determine position of grommets and pedestal drilling. Rounded end when seated at desk defines L/R hand (Right hand shown above). All worksurfaces are U.L.-listed. Recessed grommets align with desk support recessed 6. Rounded end worksurfaces may be used to create fully enclosed desks or open table/desks with support column. For front modesty, use 48 W desk support with 63 rounded end, 60 W desk support with 75 rounded end; 72 W desk support with 87 rounded end. Use 18 D pedestal or end panel each end with 30 D rounded end with recessed grommets. Rounded end worksurfaces with end grommets are supported by 30 Wor 36 W desk support and support column. Worksurfaces with grommets are bored to accept and are shipped with wire manager clips. Worksurfaces with end grommets may not be supported by conference end panels. Plastic laminate worksurfaces have radiused T-mold edge. Rounded end worksurfaces have threaded metal inserts for desk support, end panel each end, and at all bracket locations. End grommet worksurfaces have no pedestal inserts. MW2- worksurfaces are supported by brackets with machine screws. 108

109 Worksurfaces, 1 3 /4 rounded end, 36 D description w d h pattern no. paint lam. V1 V2 36 D - Recessed grommets /4 MW2-R6636R( )(L/R) $1,549. $1,989. $2, /4 MW2-R7836R( )(L/R) 1,601. 2,039. 2, /4 MW2-R9036R( )(L/R) 1,655. 2,129. 2, D - End grommets /4 MW2-R6636E( ) 1,549. 1,989. 2, /4 MW2-R7836E( ) 1,601. 2,039. 2, /4 MW2-R9036E( ) 1,655. 2,129. 2, D - No grommets /4 MW2-R6636B( )(L/R) 1,474. 1,915. 2, /4 MW2-R7836B( )(L/R) 1,524. 1,964. 2, /4 MW2-R9036B( )(L/R) 1,579. 2,053. 2,919. Support column 5 27 MM2-L26( ) 170. Worksurface Planning Example: MW2-R7836E-117 MW2 Worksurface, 1 3 /4 thick R Rounded end 78 Width 36 Depth E End grommets 117 Surface finish Grommets/no grommets: B- worksurface does not include grommets. E- rounded end worksurface includes 3 grommet in each straight end corner. R- rounded end worksurface includes 3 grommets recessed for use with 6 recessed desk support. Specify surface finish. Rounded end worksurfaces with recessed or no grommets are specified left or right to determine position of grommets and pedestal drilling. Rounded end when seated at desk defines L/R hand (Right hand shown above). All worksurfaces are U.L.-listed. Recessed grommets align with desk support recessed 6. Rounded end worksurfaces may be used to create fully enclosed desks or open table/desks with support column. For front modesty, use 48 W desk support with 66 rounded end, 60 W desk support with 78 rounded end; 72 W desk support with 90 rounded end. Use 24 D pedestal or end panel each end with 36 D. Rounded end worksurfaces with end grommets are supported by 30 Wor36 W desk support and support column. Worksurfaces with grommets are bored to accept and are shipped with wire manager clips. Worksurfaces with end grommets may not be supported by conference end panels. Plastic laminate worksurfaces have radiused T-mold edge. Rounded end worksurfaces have threaded metal inserts for desk support, end panel each end, and at all bracket locations. End grommet worksurfaces have no pedestal inserts. MW2- worksurfaces are supported by brackets with machine screws. 109

110 Conference worksurfaces, 1 3 /4 description type w d h pattern no. paint lam. V1 V2 Half round - Standard /4 MW2-R3048-B-( ) $965. $1,290. $1,773. Half round - Extended /4 MW2-R4248-B-( ) 1,139. 1,522. 2,090. Half round - With vertical panel /8 1 3 /4 MW2-R3050-B-( ) 1,065. 1,417. 1,952. Teardrop 24 return /4 MW2-T4224-B-( ) 1,001. 1,335. 1, return /4 MW2-T4830-B-( ) 1,281. 1,708. 2,306. Support column 5 27 MM2-L26( ) 170. Example: MW2-T4224-B-117 MW2 Worksurface, 1 3 /4 thick T Teardrop shape 42 Diameter 24 Return depth B No grommets 117 Surface finish Conference worksurfaces do not have grommets. Specify surface finish. Worksurfaces have threaded metal inserts at column and all bracket locations. All worksurfaces are U.L.-listed. MW2- worksurfaces are supported by brackets with machine screws. 110 Conference worksurfaces must be supported by support column and flat bracket or bridging bracket to adjacent desk. Half-round and extended half-round is used with back-to-back 24 D straight or VDT corner worksurfaces. Half round with vertical panel attaches to 24 D straight or VDT corner worksurfaces supported by vertical panel. Teardrop attaches to straight or VDT worksurfaces on either straight edge. Plastic laminate worksurfaces have radiused T-mold edge in same profile as adjacent post-formed worksurfaces.

111 Worksurfaces, 1 1 /4 18 D description type w d h pattern no. lam. V1 V2 Straight, 18 D No grommets /8 1 1 /4 MU1-S3018-B-( ) $268. $417. $ /8 1 1 /4 MU1-S3618-B-( ) /8 1 1 /4 MU1-S4218-B-( ) /8 1 1 /4 MU1-S4818-B-( ) /8 1 1 /4 MU1-S5418-B-( ) /8 1 1 /4 MU1-S6018-B-( ) /8 1 1 /4 MU1-S6618-B-( ) , /8 1 1 /4 MU1-S7218-B-( ) ,115. Worksurface Planning Example: MU1-S4818-B-117 MU1 Worksurface 1 1 /4 thick S Worksurface type 48 Width 18 Depth B No grommets 117 Surface finish B: Worksurface does not include grommets. Specify surface finish. 1 1 /4 worksurfaces are 3-ply, solid core construction with threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. All worksurfaces are U.L.-listed. MU1- worksurfaces are supported by brackets with machine screws D worksurfaces are used interchangeably in desk and panel system applications as shallow main surfaces, extensions, or credenza tops. They may be supported at each end by an 18 end support bracket, 18 cantilever bracket, 18 W conference end panel, 18 D pedestal, or 12 W end panel (MN2-E12) in conjunction with a desk support. 18 D worksurfaces with desk supports do not accept pedestals. All worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. Panel-supported 1 1 /4 worksurfaces over 48 must be mid-span supported by MB2-C18 bracket, specified separately. Suspended pedestals may not be used with 1 1 /4 worksurfaces.

112 Worksurfaces, 1 1 /4 24 D description w d h pattern no. lam. V1 V2 Straight, 24 D - Grommets /8 1 1 /4 MU1-S2424-A-( ) $339. $542. $ /8 1 1 /4 MU1-S3024-A-( ) /8 1 1 /4 MU1-S3624-A-( ) /8 1 1 /4 MU1-S4224-A-( ) /8 1 1 /4 MU1-S4824-A-( ) /8 1 1 /4 MU1-S5424-A-( ) , /8 1 1 /4 MU1-S6024-A-( ) , /8 1 1 /4 MU1-S6624-A-( ) , /8 1 1 /4 MU1-S7224-A-( ) , /8 1 1 /4 MU1-S7824-A-( ) , /8 1 1 /4 MU1-S8424-A-( ) ,056. 1, /8 1 1 /4 MU1-S9024-A-( ) ,123. 1, /8 1 1 /4 MU1-S9624-A-( ) ,228. 1,770. Straight, 24 D - No grommets /8 1 1 /4 MU1-S2424-B-( ) /8 1 1 /4 MU1-S3024-B-( ) /8 1 1 /4 MU1-S3624-B-( ) /8 1 1 /4 MU1-S4224-B-( ) /8 1 1 /4 MU1-S4824-B-( ) /8 1 1 /4 MU1-S5424-B-( ) /8 1 1 /4 MU1-S6024-B-( ) , /8 1 1 /4 MU1-S6624-B-( ) , /8 1 1 /4 MU1-S7224-B-( ) , /8 1 1 /4 MU1-S7824-B-( ) , /8 1 1 /4 MU1-S8424-B-( ) , /8 1 1 /4 MU1-S9024-B-( ) ,053. 1, /8 1 1 /4 MU1-S9624-B-( ) ,154. 1,698. Example: MU1-S3024-B-117 MU1 Worksurface, 1 1 /4 thick S Straight worksurface 30 Width 24 Depth B No grommets 117 Surface finish Grommets/no grommets: A- Worksurfaces include 3 grommet in each back corner leading into desk support or wire manager. B- Worksurface does not include grommets. Specify surface finish. 1 1 /4 worksurfaces are 3-ply, solid core construction with threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. Worksurfaces with grommets are bored to accept and are shipped with wire manager clips. All worksurfaces are U.L.-listed. MU1- worksurfaces are supported by brackets with machine screws D worksurfaces are used interchangeably as shallow main surfaces, extensions or credenza tops. They can be supported at each end by 24 end support bracket, 24 cantilever bracket, 24 W end panel, 18 D pedestal or end panel in conjunction with desk support. Use 18 D pedestals with 24 D worksurfaces for full wire management capability in desk or panel applications. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. Panel-supported 1 1 /4 worksurfaces over 48 must be mid-span supported by MB2-C18 bracket, specified separately. Suspended pedestals may not be used with 1 1 /4 worksurfaces.

113 Worksurfaces, 1 1 /4 30 D description w d h pattern no. lam. V1 V2 Straight, 30 D - Grommets /8 1 1 /4 MU1-S3030-A-( ) $405. $588. $ /8 1 1 /4 MU1-S3630-A-( ) /8 1 1 /4 MU1-S4230-A-( ) /8 1 1 /4 MU1-S4830-A-( ) , /8 1 1 /4 MU1-S5430-A-( ) , /8 1 1 /4 MU1-S6030-A-( ) , /8 1 1 /4 MU1-S6630-A-( ) , /8 1 1 /4 MU1-S7230-A-( ) , /8 1 1 /4 MU1-S7830-A-( ) ,056. 1, /8 1 1 /4 MU1-S8430-A-( ) ,137. 1, /8 1 1 /4 MU1-S9030-A-( ) ,208. 1, /8 1 1 /4 MU1-S9630-A-( ) ,314. 1,935. Straight, 30 D - No grommets /8 1 1 /4 MU1-S3030-B-( ) /8 1 1 /4 MU1-S3630-B-( ) /8 1 1 /4 MU1-S4230-B-( ) /8 1 1 /4 MU1-S4830-B-( ) /8 1 1 /4 MU1-S5430-B-( ) , /8 1 1 /4 MU1-S6030-B-( ) , /8 1 1 /4 MU1-S6630-B-( ) , /8 1 1 /4 MU1-S7230-B-( ) , /8 1 1 /4 MU1-S7830-B-( ) , /8 1 1 /4 MU1-S8430-B-( ) ,065. 1, /8 1 1 /4 MU1-S9030-B-( ) ,139. 1, /8 1 1 /4 MU1-S9630-B-( ) ,242. 1,864. Worksurface Planning Example: MU1-S3030B-117 MU1 Worksurface, 1 1 /4 thick S Straight worksurface 30 Width 30 Depth B No grommets 117 Surface finish Grommets/no grommets: A- worksurface includes 3 grommet in each back corner leading into desk support or wire manager clips. B- worksurface does not include grommets Specify surface finish. 1 1 /4 worksurfaces are 3-ply, solid core construction with threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. All worksurfaces are U.L.-listed. MU1- worksurfaces are supported by brackets with machine screws. Plastic laminate worksurfaces are post-formed top and bottom, front and back. 30 D worksurfaces are used interchangeably in desk and panel system applications as main surfaces, extensions or credenza tops. They can be supported at each end by 30 end support bracket, 30 cantilever bracket, 30 flat bracket, 30 W end panel, 24 D pedestal or end panel in conjunction with desk support, or 30 D pedestal. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. Panel-supported 1 1 /4 worksurfaces over 48 must be mid-span supported by MB2-C18 bracket, specified separately. Worksurfaces with grommets are bored to accept and are shipped with wire manager clips. Suspended pedestals may not be used with 1 1 /4 worksurfaces. 113

114 Worksurfaces, 1 1 /4 trapezoidal description w d h pattern no. lam. V1 V2 Right hand - grommet / /4 MU1-T48A-R-( ) $627. $893. $1, / /4 MU1-T54A-R-( ) ,072. 1, / /4 MU1-T60A-R-( ) ,248. 1, / /4 MU1-T72A-R-( ) 1,004. 1,430. 1,998. Left hand - grommet / /4 MU1-T48A-L-( ) , / /4 MU1-T54A-L-( ) ,072. 1, / /4 MU1-T60A-L-( ) ,248. 1, / /4 MU1-T72A-L-( ) 1,004. 1,430. 1,998. Right hand - no grommet / /4 MU1-T48B-R-( ) , / /4 MU1-T54B-R-( ) , / /4 MU1-T60B-R-( ) ,159. 1, / /4 MU1-T72B-R-( ) ,339. 1,874. Left hand - no grommet / /4 MU1-T48B-L-( ) , / /4 MU1-T54B-L-( ) , / /4 MU1-T60B-L-( ) ,159. 1, / /4 MU1-T72B-L-( ) ,339. 1,874. Example: MU1-T48B-R-117 MU1 Worksurface, 1 1 /4 thick T Trapezoidal worksurface 48 Width A Grommets R Right hand 117 Surface finish Grommets/no grommets: A- worksurface includes 3 grommet in each back corner. B- worksurface does not include grommets Specify surface finish. Right- and Left- hand are defined by applying trapezoidal tops as returns from rectilinear worksurfaces.r-right hand 30 D Left, 24 D Right edge L-Left hand 24 D Left, 30 D Right edge All worksurfaces are U.L.-listed. 114 Plastic laminate worksurfaces are post-formed top and bottom, front and back. All worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. 1 1 /4 worksurfaces are 3-ply, solid core construction with threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. MU1- worksurfaces are supported by brackets with machine screws. Trapezoidal worksurfaces are used interchangeably in desk and panel system applications. They must be supported at each end by a pedestal, end panel, end support, cantilever or cantilever bridging bracket with a maximum span of 48 between supports. Panel-supported worksurfaces over 48 must be mid-span supported by MB2-C18 brackets, specified separately.

115 Worksurfaces, 1 1 /4 VDT corners description w d h pattern no. lam. V1 V2 Corner - Corner grommet only 35 5 / /8 1 1 /4 MU1-V3618-A( ) $689. $902. $1, / /8 1 1 /4 MU1-V3624-A( ) , / /8 1 1 /4 MU1-V4224-A( ) , / /8 1 1 /4 MU1-V4230-A( ) ,002. 1, / /8 1 1 /4 MU1-V4824-A( ) ,079. 1, / /8 1 1 /4 MU1-V4830-A( ) ,165. 1,739. Corner - 3 grommets 35 5 / /8 1 1 /4 MU1-V3624-C( ) , / /8 1 1 /4 MU1-V4224-C( ) ,022. 1, / /8 1 1 /4 MU1-V4230-C( ) ,070. 1, / /8 1 1 /4 MU1-V4824-C( ) ,153. 1, / /8 1 1 /4 MU1-V4830-C( ) ,235. 1,812. Worksurface Planning Example: MU1-V4830-C-117 MU1 Worksurface, 1 1 /4 thick V VDT corner 48 Width 30 Depth of return C Three grommets 117 Surface finish Grommets/no grommets: A- VDT corner includes 3 grommet in back corner. C- VDT corner includes 3 grommet in all three back corners. Specify surface finish. 1 1 /4 VDT corners are solid core construction with threaded metal inserts at desk support and all bracket locations.all worksurfaces are U.L.-listed. MU1- worksurfaces are supported by brackets with machine screws. VDT corners may be used interchangeably in desk and panel system applications. They may be supported by VDT end support brackets on each back edge; they may be supported by flat bracket or bridging bracket on each side edge. 36 Wx18 D VDT corners accept 18 D returns, 36,42, and 48 Wx 24 D VDT corners accept 24 D returns, 42 and 48 Wx30 D VDT corners accept 30 D returns. VDT corners are 3 /8 less than nominal depth for rear wire clearance or privacy screens. 48 x24 VDT corners have an inside radius, T-mold front edge that curves into an optimal 45 straight keyboard location. Corner worksurfaces with equal rear edges have diagonal grain direction. 115

116 Worksurfaces, 1 1 /4 split top straight worksurfaces description type w d h pattern no. lam. V1 V2 Straight, 30 D Grommets /8 1 1 /4 MU1-S36DS-A( ) $1,565. $1,741. $2, /8 1 1 /4 MU1-S42DS-A( ) 1,601. 1,789. 2, /8 1 1 /4 MU1-S48DS-A( ) 1,630. 1,841. 2,153. Straight, 36 D Grommets /8 1 1 /4 MU1-S36ES-A( ) 1,602. 1,790. 2, /8 1 1 /4 MU1-S42ES-A( ) 1,637. 1,844. 2, /8 1 1 /4 MU1-S48ES-A( ) 1,670. 1,899. 2,235. Example: MU1-S48DS-A-117 MU1 Worksurface, 1 1 /4 thick S Straight 48 Width D Depth S Split top A Grommet 117 Surface finish Worksurface Depth: D- 30 D: 18 D monitor platform and 11 keyboard E- 36 D: 24 D monitor platform and 11 keyboard Grommets/no grommets: A- Grommets in back corners of straight tops. Specify surface finish. 1 1 /4 worksurfaces are solid core construction with threaded metal inserts at desk support and all bracket locations.all worksurfaces are U.L.-listed. MU1- worksurfaces are supported by brackets with machine screws. Split top worksurfaces include counterbalanced adjustable keyboard/ mouse support with fingertip control. Front surface adjusts from 5 below back surface to 7 above, and adjusts in tilt from -10 to +10. Split top surfaces may be panel supported or desk supported with standard brackets. Specify 18 D cantilever brackets with 30 D straight and 24 D cantilever brackets with 36 D straight split tops. 116

117 Worksurfaces, 1 1 /4 split top VDT corners description type w d h pattern no. lam. V1 V2 VDT corner Corner grommet only 41 5 / /8 1 1 /4 MU1-V42SS-A( ) $1,865. $2,070. $2, / /8 1 1 /4 MU1-V48SS-A( ) 1,997. 2,201. 2, / /8 1 1 /4 MU1-V48DS-A( ) 2,032. 2,284. 2,856. VDT corner 3 grommets 41 5 / /8 1 1 /4 MU1-V42SS-C( ) 1,936. 2,140. 2, / /8 1 1 /4 MU1-V48SS-C( ) 2,070. 2,272. 2, / /8 1 1 /4 MU1-V48DS-C( ) 2,105. 2,357. 2,928. Worksurface Planning Example: MU1-V48SS-A-117 MU1 Worksurface, 1 1 /4 thick V VDT corner 48 Width S Depth S Split top A Grommet 117 Surface finish VDT Corner Depth: S- 24 D sides D- 30 D sides Grommets/no grommets: A- Grommets in back corners of straight tops, one back corner of VDT C- Grommets in all three back corners of VDT Specify surface finish. 1 1 /4 VDT corners are solid core construction with threaded metal inserts at desk support and all bracket locations. All worksurfaces are U.L.-listed. MU1- worksurfaces are supported by brackets with machine screws. Split top worksurfaces include counterbalanced adjustable keyboard/ mouse support with fingertip control. Front surface adjusts from 5 below back surface to 7 above, and adjusts in tilt from -10 to +10. Split top surfaces may be panel supported or desk supported with standard brackets. Specify 18 D cantilever brackets with 23 5 /8 split corners, and 24 D cantilever or bridging brackets with 29 5 /8 D split corners. 48 W split-top VDT corners must be supported by VDT-end support kits in conjunction with cantilever brackets at side edges. Corner worksurfaces with equal rear edges have diagonal grain direction. 117

118 Worksurfaces, 1 1 /4 rounded end worksurfaces description w d h pattern no. paint lam. V1 V2 30 D rounded end - End grommets 62 5 / /4 MU1-R6330E( ) $1,074. $1,494. $2, / /4 MU1-R7530E( ) 1,109. 1,544. 2, D rounded end - Recessed grommets 62 5 / /4 MU1-R6330R( )(L/R) 1,074. 1,494. 2, / /4 MU1-R7530R( )(L/R) 1,109. 1,544. 2, D rounded end - No grommets 62 5 / /4 MU1-R6330B( )(L/R) 1,003. 1,422. 2, / /4 MU1-R7530B( )(L/R) 1,036. 1,470. 2,175. Support column 5 27 MM2-L26( ) 170. Example: MU1-R6330E-117 MU1 Worksurface, 1 1 /4 thick R Rounded end 63 Width 30 Depth E End grommets 117 Surface finish Grommets/no grommets: E- rounded end worksurface includes 3 grommet in each straight end corner. R- rounded end worksurface includes 3 grommets recessed for use with 6 recessed desk support. B- rounded end worksurface does not include grommets Specify surface finish. Rounded end worksurfaces with recessed or no grommets are specified left or right to determine position of grommets and pedestal drilling. Rounded end when seated at desk defines L/R hand (Right hand shown above). 1 1 /4 worksurfaces are 3-ply, solid core construction with threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. MU1- worksurfaces are supported by brackets with machine screws. All worksurfaces are U.L.-listed. 118 End grommeted tops have inserts to accept desk support at straight end and no pedestal inserts.plastic laminate worksurfaces have radiused T mold edge and a flat self-edge in the straight edge. Rounded end worksurfaces are used interchangeably in desk and panel system applications as main surfaces or extensions. They may be supported by 30 end support brackets, 30 cantilever bracket, 30 flat bracket or 30 conference end panel, and by a support column at the rounded end. Use 18 D pedestal or end panel with desk support under rounded end worksurfaces with recessed grommets. Use 48 D desk support with 63 rounded end and 60 W desk support with 75 rounded end. Worksurfaces with end grommets may not be supported by conference end panel. Suspended pedestals may not be used with 1 1 /4 worksurfaces. Rounded end worksurfaces have threaded metal inserts for desk support, end panel each end, and at all bracket locations. End grommet worksurfaces have no pedestal inserts.

119 Worksurfaces, 1 1 /4 conference shapes description type w d h pattern no. paint lam. V1 V2 Half round - Standard /4 MU1-R3048-B-( ) $732. $1,045. $1,487. Half round - Extended /4 MU1-R4248-B-( ) ,233. 1,752. Half round - With vertical panel /8 1 1 /4 MU1-R3050-B-( ) ,147. 1,639. Teardrop 24 return /4 MU1-T4224-B-( ) ,079. 1, return /4 MU1-T4830-B-( ) ,382. 1,969. Support column 5 27 MM2-L26( ) 170. Worksurface Planning Example: MU1-R3050B-117 MU1 Worksurface, 1 1 /4 thick R Rounded end 30 Width 50 Depth B No grommet 117 Surface finish Grommets/no grommets: B- worksurface does not include grommets. Specify surface finish. 1 1 /4 worksurfaces are 3-ply, solid core construction with threaded metal inserts at all end panel, desk support and bracket locations and pilot holes at pedestal locations. MU1- worksurfaces are supported by brackets with machine screws. Plastic laminate worksurfaces have radiused T mold edge. All worksurfaces are U.L.-listed. 119 Half-round and extended half-round are used with back-to-back 24 D straight or VDT corner worksurfaces. Half round with vertical panel attaches to 24 D straight or VDT corner worksurfaces supported by vertical panel. Conference worksurfaces must be supported by support column and flat bracket or bridging bracket to adjacent worksurface.

120 Worksurfaces, 1 1 /4 P-shape curvilinear description type w d h pattern no. paint lam. V1 V2 Rounded end left 24 D return /4 MU1-P72SA( )L $1,869. $2,400. $3, D return /4 MU1-P78DA( )L 1,947. 2,505. 3,507. Rounded end right 24 D return /4 MU1-P72SA( )R 1,869. 2,400. 3, D return /4 MU1-P78DA( )R 1,947. 2,505. 3,507. Rounded end support column 5 27 MM2-L26-( ) 170. Example: MU1-P72SA-117L MU1 Worksurface, 1 1 /4 P P-shape curvilinear 72 Overall length S Depth of return A Grommets 117 Surface finish L Rounded end left S- 24 D side edge D- 30 D side edge Specify surface finish. 1 1 /4 curvilinear surfaces are solid core construction with threaded metal inserts at desk support and all bracket locations. MU1- worksurfaces are supported by brackets with machine screws. All worksurfaces are U.L.-listed. All P-shape worksurfaces have 2 grommets at 48 end for use with 48 desk and overhead supports. 120 P-shape curvilinear worksurfaces may be used interchangeably in desk and panel system applications. They may be supported by a 48 VDT support bracket kit, or 48 desk support and 6 end panel, in conjunction with rounded end support column. Use flat bracket or bridging bracket to join to adjacent 1 1 /4 worksurface. P-shape laminate surfaces have continuous T-mold edge in profile to match adjacent 1 1 /4 worksurfaces.

121 Worksurfaces, 1 1 /4 L-shape curvilinear description type w d h pattern no. lam. V1 V2 24 D returns left and right 3 grommets /4 MU1-C4242SS( ) $855. $1,100. $1, /4 MU1-C4848SS( ) ,201. 1, /4 MU1-C4860SS( ) 1,060. 1,362. 1, /4 MU1-C4872SS( ) 1,216. 1,566. 2, /4 MU1-C6048SS( ) 1,060. 1,362. 1, /4 MU1-C7248SS( ) 1,216. 1,566. 2, D return left, 30 D right 3 grommets /4 MU1-C4848SD( ) ,201. 1, /4 MU1-C4860SD( ) 1,060. 1,362. 1, /4 MU1-C4872SD( ) 1,216. 1,566. 2, /4 MU1-C6048SD( ) 1,060. 1,362. 1, /4 MU1-C7248SD( ) 1,216. 1,566. 2, D return left, 24 D right 3 grommets /4 MU1-C4848DS( ) ,201. 1, /4 MU1-C4860DS( ) 1,060. 1,362. 1, /4 MU1-C4872DS( ) 1,216. 1,566. 2, /4 MU1-C6048DS( ) 1,060. 1,362. 1, /4 MU1-C7248DS( ) 1,216. 1,566. 2, D returns left and right 3 grommets /4 MU1-C4848DD( ) ,201. 1,678. Worksurface Planning Example: MU1-C4860SD-117 MU1 Worksurface, 1 1 /4 C L-shape curvilinear 48 Width left 60 Width right S Depth of left return D Depth of right return 117 Surface finish Width dimension (W) refers to width of left-side back edge; depth dimension (D) indicates width of right-side back edge. S- 24 D side edge D- 30 D side edge Specify surface finish. 1 1 /4 curvilinear surfaces are solid core construction with threaded metal inserts at desk support and all bracket locations. MU1- worksurfaces are supported by brackets with machine screws. All worksurfaces are U.L.-listed. All L-shape curvilinear worksurfaces have three grommets. Corner worksurfaces with equal rear edges have diagonal grain direction. 121 L-shape worksurfaces have grain direction along the longer back edge. L-shape curvilinear worksurfaces may be used interchangeably in desk and panel system applications. They may be supported by corner desk supports or by VDT end support bracket kit. Use cantilever bridging brackets or flat brackets to join to adjacent worksurfaces. L-shape surfaces may also be supported by MN1- end panel in conjunction with desk support, or cantilever bracket in panel planning. L-shape surfaces are veneer or post-formed plastic laminate on both back edges, matching profile T-mold on curvilinear front, and self-edge on sides. Curvilinear worksurfaces are available only in 1 1 /4 thickness. L-shape surfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. If specifying privacy screens on both back edges, one or both must be 48 back-of-vdt type.

122 Worksurfaces, 1 1 /4 J-shape surfaces description w d h pattern no. paint lam. J-shape - Rounded left /8 1 1 /4 MU1-J30A( )L $ /8 1 1 /4 MU1-J36A( )L /8 1 1 /4 MU1-J42A( )L /8 1 1 /4 MU1-J48A( )L 810. J-shape - Rounded right /8 1 1 /4 MU1-J30A( )R /8 1 1 /4 MU1-J36A( )R /8 1 1 /4 MU1-J42A( )R /8 1 1 /4 MU1-J48A( )R 810. Example: MU1-J48A117-L MU1 Worksurface, 1 1 /4 J J-shape 48 Width A With grommets 117 Surface finish L Left 1 1 /4 curvilinear surfaces are solid core construction with threaded metal inserts at desk support and all bracket locations and pilot holes at pedestal locations. MU1- worksurfaces are supported by brackets with machine screws. Specify surface finish. All worksurfaces are U.L.-listed. J-shape worksurfaces have 2 grommets for use with freestanding desk and overhead supports. 122 J-shape curvilinear worksurfaces may be used interchangeably in desk and panel system applications. They may be supported by straight desk support or cantilever brackets. J-shapes also require 9 Network end panel in desk or panel planning. Use flat bracket or bridging bracket to join to adjacent 1 1 /4 worksurface. Also specify VDT end support bracket kit for optimal stability of vertical panel behind J-shape worksurface. J-shape surfaces are post-formed on back edge, matching profile T-mold on curvilinear front, and self-edge on sides. J-shapes are available only in plastic laminate, 1 1 /4 thickness. J-shape surfaces are 3 /8 less than nominal depth for wire clearance or privacy screens.

123 Worksurfaces, 1 1 /4 Wave-end surfaces description w d h pattern no. lam. Left wave-end /8 1 1 /4 MU1-W36A( )L $ /8 1 1 /4 MU1-W42A( )L /8 1 1 /4 MU1-W48A( )L 904. Right wave-end /8 1 1 /4 MU1-W36A( )R /8 1 1 /4 MU1-W42A( )R /8 1 1 /4 MU1-W48A( )R 904. Worksurface Planning Example: MU1-W48A117-L MU1 Worksurface, 1 1 /4 W Wave-end curvilinear 48 Width A With grommets 117 Surface finish L Left 1 1 /4 curvilinear surfaces are solid core construction with threaded metal inserts at desk support, and all bracket locations and pilot holes at pedestal locations. MU1- worksurfaces are supported by brackets with machine screws. Specify surface finish. All worksurfaces are U.L.-listed. Wave-end worksurfaces have 2 grommets for use with freestanding desk and overhead supports. 123 Wave-end curvilinear worksurfaces may be used interchangeably in desk and panel system applications. They may be supported by straight desk support or cantilever brackets. Use flat bracket or bridging bracket to join to adjacent 1 1 /4 worksurface. Wave-end surfaces are post-formed on back edge, matching profile T-mold on curvilinear front, and self-edge on sides. Wave-end surfaces are available only in plastic laminate, 1 1 /4 thickness. Wave-end surfaces are nominal 30 D at left or right, and align with 24 D surface at the other end. Inserts for 24 D pedestal are standard at the wave end. Wave-end surfaces are 3 /8 less than nominal depth for wire clearance or privacy screens.

124 Worksurfaces, 1 1 /4 120 corners 90 return description w return h pattern no. lam. V1 V2 90 return Right hand - grommet /4 MU1-Y36S-AR-( )( ) $643. $901. $1, /4 MU1-Y42S-AR-( )( ) ,090. 1, /4 MU1-Y48S-AR-( )( ) ,200. 1, /4 MU1-Y60S-AR-( )( ) 917. n/a n/a 90 return Left hand - grommet /4 MU1-Y36S-AL-( )( ) , /4 MU1-Y42S-AL-( )( ) ,090. 1, /4 MU1-Y48S-AL-( )( ) ,200. 1, /4 MU1-Y60S-AL-( )( ) 917. n/a n/a 90 return - no grommet /4 MU1-Y36S-B-( )( ) , /4 MU1-Y42S-B-( )( ) ,068. 1, /4 MU1-Y48S-B-( )( ) ,177. 1, /4 MU1-Y60S-B-( )( ) 893. n/a n/a Transitional /4 MU1-YTS-( )( ) Example: MU1-Y48S-A-R-L-117 MU1 Worksurface, 1 1 /4 thick Y 120 corner,90 returns 48 Width S 24 D return A Grommets R Right hand L Laminate 117 Surface finish Width dimension (w) refers to width of both back edges. Specify surface finish. 1 1 /4 worksurfaces are solid core construction with threaded metal inserts at desk supports and all standard bracket locations. MU1- worksurfaces are supported by brackets with machine screws. Grommets/no grommets: A- worksurface includes 2 grommets in 2 back corners, creating Left- and Right-hand applications (see illustration). B- worksurface does not include grommets. Worksurfaces with no grommets are not handed. Worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. 120 worksurfaces with 90 returns are used mainly in panel system applications. They can be suppported at each end with 24 end support brackets, 24 cantilever bracket, 24 W end panel, 18 D and 24 D pedestal or end panel in conjunction with desk supports. 120 corner is supported by a standard ( 90 ) 24 D cantilever bracket. Use cantilever bridging brackets to join to adjacent worksurface or to transitional 120 worksurface. Transitional worksurfaces connect two 120 corner tops with 90 returns. Corner worksurfaces have diagonal grain direction. 124

125 Worksurfaces, 1 1 /4 120 corners Meeting corners description w return h pattern no. paint lam. Meeting corner Right hand - grommet /4 MU1-M48S-AR-( )( ) $778. Meeting corner Left hand - grommet /4 MU1-M48S-AL-( )( ) 778. Meeting corner Right hand - no grommet /4 MU1-M48S-BR-( )( ) 755. Meeting corner Left hand - no grommet /4 MU1-M48S-BL-( )( ) 755. Worksurface Planning Support column 5 27 MM2-L26( ) 170. Example: MU1-M48S-A-L-L-117 MU1 Worksurface, 1 1 /4 thick M Meeting corner 48 Width S 24 D return A Grommets L Left hand L Laminate 117 Surface finish Width dimension (w) refers to width of smaller back edge. Total width of back edge with rounded meeting area is 62 1 /2. Specify surface finish. 1 1 /4 worksurfaces are solid core construction with threaded metal inserts at desk supports and all standard bracket locations. MU1- worksurfaces are supported by brackets with machine screws. Grommets/no grommets: A- worksurface includes 2 grommets in 2 back corners. B- worksurface does not include grommets. Worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. 120 meeting worksurfaces are used mainly in panel system applications. Support at the rounded meeting end with a support column, specified separately. They can be supported at the other end by 24 end support brackets, 24 cantilever bracket, 24 W end panel, 18 D and 24 D pedestal or end panel in conjunction with desk supports. Network straight desk support may be used under the 48W back edge. 120 corner is supported by 24 D cantilever bracket. Use 24 D cantilever bridging brackets to join to adjacent worksurfaces. 125

126 Options worksurfaces, 1 1 /4 18 D description w d h pattern no. lam. V1 V2 Straight, 18 D - Grommet /8 1 1 /4 LU1-S3018-A-( ) $219. $365. $ /8 1 1 /4 LU1-S3618-A-( ) /8 1 1 /4 LU1-S4218-A-( ) /8 1 1 /4 LU1-S4818-A-( ) /8 1 1 /4 LU1-S5418-A-( ) /8 1 1 /4 LU1-S6018-A-( ) /8 1 1 /4 LU1-S6618-A-( ) /8 1 1 /4 LU1-S7218-A-( ) , /8 1 1 /4 LU1-S7818-A-( ) , /8 1 1 /4 LU1-S8418-A-( ) , /8 1 1 /4 LU1-S9018-A-( ) , /8 1 1 /4 LU1-S9618-A-( ) , /8 1 1 /4 LU1-S10818-A-( ) , /8 1 1 /4 LU1-S12018-A-( ) ,446. Straight, 18 D - No grommet /8 1 1 /4 LU1-S3018-B-( ) /8 1 1 /4 LU1-S3618-B-( ) /8 1 1 /4 LU1-S4218-B-( ) /8 1 1 /4 LU1-S4818-B-( ) /8 1 1 /4 LU1-S5418-B-( ) /8 1 1 /4 LU1-S6018-B-( ) /8 1 1 /4 LU1-S6618-B-( ) /8 1 1 /4 LU1-S7218-B-( ) /8 1 1 /4 LU1-S7818-B-( ) , /8 1 1 /4 LU1-S8418-B-( ) , /8 1 1 /4 LU1-S9018-B-( ) , /8 1 1 /4 LU1-S9618-B-( ) , /8 1 1 /4 LU1-S10818-B-( ) , /8 1 1 /4 LU1-S12018-B-( ) ,419. Example: LU1-S4818-B-117 LU1 Worksurface, 1 1 /4 thick S Straight worksurface 48 Width 18 Depth B No grommet 117 Surface finish Grommet/no grommet: A- worksurface includes one edge grommet B- worksurface does not include grommet Specify surface finish. 1 1 /4 Options worksurfaces are 3-ply, solid core construction with pilot holes at all pedestal, end panel, and bracket locations. Edge grommets are centered at rear of worksurface. LU1- worksurfaces are supported by brackets with wood screws D worksurfaces are used in panel system applications as shallow main surfaces, extensions or credenza tops. They may be supported at each end by an 18 end support bracket, 18 cantilever bracket, 18 W desk end panel or 18 D pedestal. Options worksurfaces cannot be used in conjunction with Network desk supports. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance. Panel-supported 1 1 /4 worksurfaces over 48 must be mid-span supported by MB2-C18 bracket, specified separately. Panel-supported 1 1 /4 worksurfaces over 96 must be pedestal or MB2-C24 cantilever bracket supported every 48. Suspended pedestals may not be used with 1 1 /4 worksurfaces.

127 Options worksurfaces, 1 1 /4 24 D description w d h pattern no. lam. V1 V2 Straight, 24 D - Grommet /8 1 1 /4 LU1-S2424-A-( ) $245. $439. $ /8 1 1 /4 LU1-S3024-A-( ) /8 1 1 /4 LU1-S3624-A-( ) /8 1 1 /4 LU1-S4224-A-( ) /8 1 1 /4 LU1-S4824-A-( ) /8 1 1 /4 LU1-S5424-A-( ) /8 1 1 /4 LU1-S6024-A-( ) /8 1 1 /4 LU1-S6624-A-( ) , /8 1 1 /4 LU1-S7224-A-( ) , /8 1 1 /4 LU1-S7824-A-( ) , /8 1 1 /4 LU1-S8424-A-( ) , /8 1 1 /4 LU1-S9024-A-( ) , /8 1 1 /4 LU1-S9624-A-( ) , /8 1 1 /4 LU1-S10824-A-( ) , /8 1 1 /4 LU1-S12024-A-( ) ,044. 1,586. Straight, 24 D - No grommet /8 1 1 /4 LU1-S2424-B-( ) /8 1 1 /4 LU1-S3024-B-( ) /8 1 1 /4 LU1-S3624-B-( ) /8 1 1 /4 LU1-S4224-B-( ) /8 1 1 /4 LU1-S4824-B-( ) /8 1 1 /4 LU1-S5424-B-( ) /8 1 1 /4 LU1-S6024-B-( ) /8 1 1 /4 LU1-S6624-B-( ) /8 1 1 /4 LU1-S7224-B-( ) , /8 1 1 /4 LU1-S7824-B-( ) , /8 1 1 /4 LU1-S8424-B-( ) , /8 1 1 /4 LU1-S9024-B-( ) , /8 1 1 /4 LU1-S9624-B-( ) , /8 1 1 /4 LU1-S10824-B-( ) , /8 1 1 /4 LU1-S12024-B-( ) ,016. 1,559. Worksurface Planning Example: LU1-S3024-B-117 LU1 Worksurface, 1 1 /4 thick S Straight worksurface 30 Width 24 Depth B No grommet 117 Surface finish Grommet/no grommet: A- worksurface includes one edge grommet B- worksurface does not include grommet Specify surface finish. 1 1 /4 Options worksurfaces are 3-ply, solid core construction with pilot holes at all pedestal, end panel, and bracket locations. Edge grommets are centered at rear of worksurface. LU1- worksurfaces are supported by brackets with wood screws D worksurfaces are used interchangeably as shallow main surfaces, extensions or credenza tops. They can be supported at each end by 24 end support bracket, 24 cantilever bracket, 24 W end panel or 18 D pedestal. Options worksurfaces cannot be used in conjunction with Network desk supports. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance. Panel-supported 1 1 /4 worksurfaces over 48 must be mid-span supported by MB2-C18 bracket, specified separately. Panel-supported 1 1 /4 worksurfaces over 96 must be pedestal or MB2-C24 cantilever bracket supported every 48. Suspended pedestals may not be used with 1 1 /4 worksurfaces.

128 Options worksurfaces, 1 1 /4 30 D description w d h pattern no. lam. V1 V2 Straight, 30 D - Grommets /8 1 1 /4 LU1-S3030-A-( ) $287. $460. $ /8 1 1 /4 LU1-S3630-A-( ) /8 1 1 /4 LU1-S4230-A-( ) /8 1 1 /4 LU1-S4830-A-( ) /8 1 1 /4 LU1-S5430-A-( ) /8 1 1 /4 LU1-S6030-A-( ) , /8 1 1 /4 LU1-S6630-A-( ) , /8 1 1 /4 LU1-S7230-A-( ) , /8 1 1 /4 LU1-S7830-A-( ) , /8 1 1 /4 LU1-S8430-A-( ) , /8 1 1 /4 LU1-S9030-A-( ) , /8 1 1 /4 LU1-S9630-A-( ) ,452. Straight, 30 D - No grommets /8 1 1 /4 LU1-S3030-B-( ) /8 1 1 /4 LU1-S3630-B-( ) /8 1 1 /4 LU1-S4230-B-( ) /8 1 1 /4 LU1-S4830-B-( ) /8 1 1 /4 LU1-S5430-B-( ) /8 1 1 /4 LU1-S6030-B-( ) , /8 1 1 /4 LU1-S6630-B-( ) , /8 1 1 /4 LU1-S7230-B-( ) , /8 1 1 /4 LU1-S7830-B-( ) , /8 1 1 /4 LU1-S8430-B-( ) , /8 1 1 /4 LU1-S9030-B-( ) , /8 1 1 /4 LU1-S9630-B-( ) ,427. Example: LU1-S3030B-117 LU1 Worksurface, 1 1 /4 thick S Straight worksurface 30 Width 30 Depth B No grommets 117 Surface finish Grommets/no grommets: A- worksurface includes one edge grommet B- worksurface does not include grommets Specify surface finish. 1 1 /4 Options worksurfaces are 3-ply, solid core construction with pilot holes at all pedestal, end panel, and bracket locations. Edge grommets are centered at rear of worksurface. LU1- worksurfaces are supported by brackets with wood screws D worksurfaces are used in panel system applications as main surfaces, extensions or credenza tops. They can be supported at each end by 30 end support bracket, 30 cantilever bracket or 30 W end panel. Options worksurfaces cannot be used in conjunction with Network desk supports. All straight worksurfaces are 3 /8 less than nominal depth for rear wire clearance. Panel-supported 1 1 /4 worksurfaces over 48 must be mid-span supported by MB2-C24 bracket, specified separately. Suspended pedestals may not be used with 1 1 /4 worksurfaces.

129 Options worksurfaces, 1 1 /4 trapezoidal description w d h pattern no. lam. V1 V2 Right hand - grommet / /4 LU1-T48A-R-( ) $464. $661. $ / /4 LU1-T54A-R-( ) , / /4 LU1-T60A-R-( ) ,018. 1, / /4 LU1-T72A-R-( ) ,197. 1,674. Left hand - grommet / /4 LU1-T48A-L-( ) / /4 LU1-T54A-L-( ) , / /4 LU1-T60A-L-( ) ,018. 1, / /4 LU1-T72A-L-( ) ,197. 1,674. Right hand - no grommet / /4 LU1-T48B-R-( ) / /4 LU1-T54B-R-( ) , / /4 LU1-T60B-R-( ) , / /4 LU1-T72B-R-( ) ,159. 1,624. Left hand - no grommet / /4 LU1-T48B-L-( ) / /4 LU1-T54B-L-( ) , / /4 LU1-T60B-L-( ) , / /4 LU1-T72B-L-( ) ,159. 1,624. Worksurface Planning Example: LU1-T48B-R-117 LU1 Worksurface, 1 1 /4 thick T Trapezoidal 48 Width B No grommets R Right hand 117 Surface finish Grommets/ no grommets A- worksurface includes one edge grommet B- worksurface does not include grommets Specify surface finish. Edge grommets are centered at rear of worksurface.right-and-left and are defined by applying trapezoidal tops as returns from rectilinear worksurfaces. R- Right hand 30 D Left, 24 D Right edge L- Left hand 24 D Left, 30 D Right edge 1 1 /4 Options worksurfaces are 3- ply solid core construction with pilot holes at all pedestal, end panel and bracket locations. LU1- worksurfaces are supported by brackets with wood screws. Trapezoidal worksurfaces must be supported at each end by a pedestal, cantilever or cantilever bridging bracket with a maximum span of 48 between supports. Panel-supported worksurfaces over 48 must be mid-span supported by MB2-C18 brackets, specified separately. Options worksurfaces cannnot be used in conjunction with Network desk supports. All worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. 129

130 Options worksurfaces, 1 1 /4 VDT corners and split-top surfaces description type w d h pattern no. lam. V1 V2 Corner Corner grommet only /8 1 1 /4 LU1-V3618-A( ) $521. $724. $1, /8 1 1 /4 LU1-V3624-A( ) , /8 1 1 /4 LU1-V4224-A( ) , /8 1 1 /4 LU1-V4230-A( ) , /8 1 1 /4 LU1-V4824-A( ) , /8 1 1 /4 LU1-V4830-A( ) ,483. Split top corner Corner grommet only /8 1 1 /4 LU1-V42SS-A( ) 1,625. 1,816. 2, /8 1 1 /4 LU1-V48SS-A( ) 1,719. 1,910. 2, /8 1 1 /4 LU1-V48DS-A( ) 1,747. 1,983. 2,518. Split top straight Center grommet /8 1 1 /4 LU1-S36DS-A( ) 1,383. 1,549. 1, /8 1 1 /4 LU1-S42DS-A( ) 1,411. 1,589. 1, /8 1 1 /4 LU1-S48DS-A( ) 1,438. 1,636. 1,923. Example: LU1-V4830-A-117 LU1 Worksurface, 1 1 /4 thick V VDT corner 48 Width 30 Depth of return A Corner grommet 117 Specify finish Grommet/no grommet: A- VDT corner includes one edge grommet in back corner. Straight split top has one center back edge grommet. Specify surface finish. 1 1 /4 Options worksurfaces are solid core construction with pilot holes at all bracket locations. LU1- worksurfaces are supported by brackets with wood screws. 130 VDT corners and split top straight surfaces are used in panel system applications. Options VDT corners may be supported by left or right hand 24 cantilever brackets at the rear corner, and cantilever bridging bracket on each side edge (see page 157). Options straight split top should be supported by 18 D cantilever bracket. 48 W split-top corners must be supported by VDT- end support brackets kits in conjunction with cantilever brackets at side edges. Options worksurfaces cannot be used in conjunction with Network desk supports. 36 Wx18 D VDT corners accept 18 D returns, 36,42, and 48 Wx 24 D VDT corners accept 24 D returns, 42 and 48 Wx30 D VDT corners accept 30 D returns. VDT corners are 3 /8 less than nominal depth for rear wire clearance. Split top corners have counterbalanced adjustable keyboard/mouse surface with fingertip control. Front surface adjusts from 5 below to 7 above back surface, and adjusts in tilt from -10 to +10. Corner worksurfaces with equal rear edges have diagonal grain direction.

131 Options worksurfaces, 1 1 /4 L-shape curvilinear description type w d h pattern no. lam. V1 V2 24 D returns left and right 2 grommets /4 LU1-C4860SS( ) $806. $1,096. $1, /4 LU1-C4872SS( ) ,262. 1, /4 LU1-C6048SS( ) ,096. 1, /4 LU1-C7248SS( ) ,262. 1,860. Corner grommet /4 LU1-C4242SS( ) , /4 LU1-C4848SS( ) , D return left, 30 D right 2 grommets /4 LU1-C4860SD( ) ,096. 1, /4 LU1-C4872SD( ) ,262. 1, /4 LU1-C6048SD( ) ,096. 1, /4 LU1-C7248SD( ) ,262. 1,860. Corner grommet /4 LU1-C4848SD( ) , D return left, 24 D right 2 grommets /4 LU1-C4860DS( ) ,096. 1, /4 LU1-C4872DS( ) ,262. 1, /4 LU1-C6048DS( ) ,096. 1, /4 LU1-C7248DS( ) ,262. 1,860. Corner grommet /4 LU1-C4848DS( ) , D returns left and right Corner grommet /4 LU1-C4848DD( ) ,422. Worksurface Planning Example: LU1-C4860SD-117 LU1 Options worksurface, 1 1 /4 C L-shape curvilinear 48 Width left 60 Width right S Depth of left return D Depth of right return 117 Surface finish Width dimension (W) refers to width of left-side back edge; depth dimension (D) indicates width of right-side back edge. S- 24 D side edge D- 30 D side edge Specify surface finish. 1 1 /4 curvilinear surfaces are solid core construction with pilot holes at all bracket locations. LU1- worksurfaces are supported by brackets with wood screws. Corner worksurfaces with equal rear edges have diagonal grain direction. 131 L-shape worksurfaces have grain direction along the longer back edge. Options L-shaped curvilinear worksurfaces may be supported by left- or right-hand cantilever brackets at the rear corner and cantilever bridging bracket on each side edge. Use mid-span support whenever Options worksurfaces span more than 48. L-shape surfaces are veneer or post-formed plastic laminate on both back edges, matching profile T-mold on curvilinear front, and self-edge on sides. Curvilinear worksurfaces are available only in 1 1 /4 thickness. L-shape surfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens.

132 Options worksurfaces, 1 1 /4 rounded end and conference shapes description type w d h pattern no. paint lam. V1 V2 30 D rounded end No grommets 62 5 / /4 LU1-R6330B( )(L/R) $762. $1,162. $1,848. No grommets 74 5 / /4 LU1-R7530B( )(L/R) ,204. 1,877. Half round With vertical panel /8 1 1 /4 LU1-R3050-B-( ) ,279. Teardrop 24 return /4 LU1-T4224-B-( ) , return /4 LU1-T4830-B-( ) ,133. 1,694. Support column 5 27 MM2-L26( ) 170. Example: LU1-R6330B-117-L LU1 Options worksurface, 1 1 /4 thick R Rounded end 63 Width 30 Depth B No grommets 117 Surface finish L Left hand Grommets/no grommets: B- worksurface does not include grommets. Specify surface finish. 1 1 /4 worksurfaces are 3-ply, solid core construction.plastic laminate worksurfaces have radiused T mold edge. Rounded end worksurfaces have a flat self-edge in the straight end. LU1- worksurfaces are supported by brackets with wood screws. 132 Rounded end worksurfaces are specified left or right to determine position of pedestal drilling. Rounded end when seated at desk defines L/R hand (Right hand shown above). All worksurfaces are U.L.-listed. Rounded end worksurfaces may be supported by 30 end support brackets, 30 flat bracket or 30 conference end panel, and by a support column at the rounded end. Suspended pedestals may not be used with 1 1 /4 worksurfaces. Conference worksurfaces must be supported by support column and flat bracket or bridging bracket to adjacent desk. Half round with vertical panel attaches to 24 D straight or VDT corner worksurfaces supported by vertical panel.

133 Options worksurfaces, 1 1 /4 Wave-end surfaces description w d h pattern no. lam Left wave-end - Grommet /8 1 1 /4 LU1-W36AL( ) $ /8 1 1 /4 LU1-W42AL( ) /8 1 1 /4 LU1-W48AL( ) 753. Left wave-end - No grommet /8 1 1 /4 LU1-W36BL( ) /8 1 1 /4 LU1-W42BL( ) /8 1 1 /4 LU1-W48BL( ) 740. Right wave-end - Grommet /8 1 1 /4 LU1-W36AR( ) /8 1 1 /4 LU1-W42AR( ) /8 1 1 /4 LU1-W48AR( ) 753. Right wave-end - No grommet /8 1 1 /4 LU1-W36BR( ) /8 1 1 /4 LU1-W42BR( ) /8 1 1 /4 LU1-W48BR( ) 740. Worksurface Planning Example: LU1-W48AL-117 LU1 Options worksurface, 1 1 /4 W Wave-end curvilinear 48 Width A With grommets L Left 117 Surface finish 1 1 /4 curvilinear surfaces are solid core construction with pilot holes at bracket and pedestal locations. LU1- worksurfaces are supported by brackets with wood screws. Grommets/no grommets: A- Worksurface includes one edge grommet B- Worksurface does not include grommets Specify surface finish. Edge grommets are centered at rear of worksurface. Options wave-end curvilinear worksurfaces are for panel planning only and cannot be used in conjunction with Network desk supports. Use cantilever bridging bracket to join to adjacent 1 1 /4 worksurface. Wave-end surfaces are post-formed on back edge, matching profile T-mold on curvilinear front, and self-edge on sides. Wave-end surfaces are available only in plastic laminate, 1 1 /4 thickness. Wave-end surfaces are nominal 30 D at left or right, and align with 24 D surface at the other end. 133

134 Options worksurfaces, 1 1 /4 120 corners 90 returns and Diamond description type w return h pattern no. lam. V1 V2 90 return no grommet /4 LU1-Y36S-B( )( ) $604. $850. $1, /4 LU1-Y42S-B( )( ) ,033. 1, /4 LU1-Y48S-B( )( ) ,132. 1, /4 LU1-Y60S-B( )( ) 863. n/a n/a Diamond no grommet /4 LU1-D36S-B( )( ) , /4 LU1-D42S-B( )( ) ,052. 1, /4 LU1-D48S-B( )( ) ,177. 1,785. Transitional /4 LU1-YTS-( )( ) Example: LU1-Y48S-B-L-L-117 LU1 Options worksurface, 1 1 /4 thick Y 120 corner,90 returns 48 Width S 24 D return B No Grommets L Left hand L Laminate 117 Surface finish Width dimensions (w) refers to width of both back edges. Specify surface finish. 1 1 /4 Options worksurfaces are solid core construction with pilot holes at standard support locations. 120 Options worksurfaces are available without grommets only. LU1- worksurfaces are supported by brackets with wood screws. 134 Worksurfaces are 3 /8 less than nominal depth for rear wire clearance. 120 Options worksurfaces with 90 returns are used in panel system applications only. They can be supported at each end by 24 end support brackets, 24 cantilever bracket or 18 D and 24 D pedestals. 120 corner is supported by a standard ( 90 ) 24 D cantilever bracket. Use cantilever bridging brackets to join to adjacent worksurfaces or to transitional 120 worksurfaces. Use mid-span support whenever Options worksurfaces span more then 48. Transitional worksurfaces connect two 120 corner tops with 90 returns. 120 Options worksurfaces with 120 returns are used in panel system applications only. They can be supported at each return end by 24 end support brackets, 24 cantilever bracket or 18 D and 24 D pedestals. 120 corner is supported by standard ( 90 )24 D cantilever bracket. Order brackets with wood screws for Options worksurfaces. Corner worksurfaces have diagonal grain direction.

135 Options worksurfaces, 1 1 /4 120 corners Meeting corner description w return h pattern no. paint lam. V1 V2 Meeting corner Right hand - no grommet /4 LU1-M48S-BRL( ) $729. n/a n/a Meeting corner Left hand - no grommet /4 LU1-M48S-BLL( ) 729. n/a n/a Support column 5 27 MM2-L26( ) 170. Worksurface Planning Example: LU1-M48S-B-L-L-117 LU1 Options worksurface, 1 1 /4 thick M Meeting corner 48 Width S 24 D return B No Grommets L Left hand L Laminate 117 Surface finish Width dimension (w) refers to width of smaller back edge. Total width of back edge with rounded meeting area is 62 1 /2. Specify surface finish. 1 1 /4 worksurfaces are solid core construction with pilot holes at all support locations. 120 Options worksurfaces are available without grommets only. LU1- worksurfaces are supported by brackets with wood screws. Worksurfaces are 3 /8 less than nominal depth for rear wire clearance or privacy screens. Options 120 meeting worksurfaces are used in panel system application only. They are supported at the rounded meeting end by a support column, specified separately. They can be supported at the other end by 24 end support brackets, 24 cantilever bracket or 18 D and 24 D pedestals. 120 corner is supported by 24 D cantilever bracket. Use 24 D cantilever bridging brackets to join to adjacent worksurfaces. 135

136 Options worksurfaces, 1 1 /4 Arc description w return h pattern no. lam. V1 V2 Arc Right hand /4 LU1-A48S-ARL( ) $975. n/a n/a Arc Left hand /4 LU1-A48S-ALL( ) 975. n/a n/a Example: LU1-A48S-A-L-L-117 LU1 Options worksurface, 1 1 /4 thick A Arc 48 Width S 24 D return A Grommets L Left hand L Laminate 117 Surface finish Width dimension (w) refers to width of the three back edges. Specify surface finish. Available in laminate only. Options Arc worksurfaces are solid core construction with 0.8 mm flat pvc edge on all sides. Arc worksurfaces always come with scalloped grommet openings on all 48 edges. Worksurfaces are 3 /8 less than nominal depth for rear wire clearance. 120 Arc worksurfaces are used in panel system applications. They must be supported by cantilever brackets at each connector/post location. LU1- worksurfaces are supported by brackets with wood screws. 136

137 Currents worksurfaces for straight, flat front 3/8 wire drop and grommet description w d h pattern no. lam. 24 D - Straight worksurface, flat front /8 1 AWM2 F2424 ( )( ) $ /8 1 AWM2 F3024 ( )( ) /8 1 AWM2 F3624 ( )( ) /8 1 AWM2 F4224 ( )( ) /8 1 AWM2 F4824 ( )( ) /8 1 AWM2 F5424 ( )( ) /8 1 AWM2 F6024 ( )( ) /8 1 AWM2 F6624 ( )( ) /8 1 AWM2 F7224 ( )( ) /8 1 AWM2 F7824 ( )( ) /8 1 AWM2 F8424 ( )( ) /8 1 AWM2 F9024 ( )( ) /8 1 AWM2 F9624 ( )( ) D - Straight worksurface, flat front /8 1 AWM2 F3030 ( )( ) /8 1 AWM2 F3630 ( )( ) /8 1 AWM2 F4230 ( )( ) /8 1 AWM2 F4830 ( )( ) /8 1 AWM2 F5430 ( )( ) /8 1 AWM2 F6030 ( )( ) /8 1 AWM2 F6630 ( )( ) /8 1 AWM2 F7230 ( )( ) /8 1 AWM2 F7830 ( )( ) /8 1 AWM2 F8430 ( )( ) /8 1 AWM2 F9030 ( )( ) /8 1 AWM2 F9630 ( )( ) 746. Worksurface Planning Example: AWM2 F AWM2 Worksurface F Flat 48 Width 30 Depth 119 Top finish 119 Trim finish Specify top finish first, followed by trim finish. Please refer to the Currents price list for finishes. Veneer finishes for Currents worksurfaces for are available through Custom Product Development. Worksurfaces are sized for panel-based applications and may be supported by panel planning brackets or end-supported from Currents wall. 24 D straight tops may also be cantilevered from Currents service wall. Underside of worksurfaces is drilled to accept all panel-planning brackets, and Currents pedestals, and worksurface stiffeners. 24 D straight tops are also drilled to accept Currents wall cantilever brackets. AWM2- worksurfaces are supported by brackets with wood screws. When using end support brackets, order MB3-EC18, 24 or 30. Currents worksurfaces for require stiffener when the span between structural supports exceeds 36. Specify worksurface stiffeners and supports separately (page 142). Flat front allows two straight worksurfaces to meet at right angles. Actual worksurface depth is 3 /8 less than nominal 24 and 30 for cable clearance. All worksurfaces include one edge grommet, centered at rear of worksurface, with maximum clearance of 1 5 /8. Currents for worksurfaces feature crisp, 90-degree corners eliminating the corner kick detail typical of Currents universal worksurfaces. This facilitates the use of brackets, pedestals and end panels at the side edge of worksurfaces. Currents worksurfaces for cannot be used in conjunction with Network desk supports. 137

138 Currents worksurfaces for corner 3/8 wire drop and grommet description type w d h pattern no. lam. Corner worksurfaces 24 D both sides AWM2 C4242 S ( )( ) $ AWM2 C4848 S ( )( ) AWM2 C6060 S ( )( ) D both sides AWM2 C4242 D ( )( ) AWM2 C4848 D ( )( ) AWM2 C6060 D ( )( ) D left/24 D right AWM2 C4242 L ( )( ) AWM2 C4848 L ( )( ) AWM2 C6060 L ( )( ) D left/30 D right AWM2 C4242 R ( )( ) AWM2 C4848 R ( )( ) AWM2 C6060 R ( )( ) 958. Example: AWM2 C4848S AWM2 Worksurface C Corner 48 Width left 48 Width right S Depth left and right 119 Top finish 119 Trim finish Dimensions shown in w column are nominal width of left back edge. Dimensions shown in d column are nominal width of right back edge. Worksurface depths: S 24 D both sides L 30 D left/24 D right R 24 D left/30 D right Specify top finish first, followed by trim finish. Please refer to the Currents price list for finishes. Veneer finishes for Currents worksurfaces for are available through Custom Product Development. Worksurfaces are sized for panel-based applications and may be supported by panel-planning brackets or end-supported and cantilevered from Currents wall. Underside of worksurfaces is drilled to accept all panel-planning brackets, and Currents pedestals, and worksurface stiffeners. 24 D worksurfaces are also drilled to accept Currents wall cantilever brackets. AWM2- worksurfaces are supported by brackets with wood screws. When using end support brackets, order MB3-EC18, 24 or 30. Currents worksurfaces for require stiffener when the span between structural supports exceeds 36. Specify worksurface stiffeners and supports separately (page 142). Currents worksurfaces for cannot be used in conjunction with Network desk supports. Actual worksurface depth is 3 /8 less than nominal 24 and 30 for cable clearance. All worksurfaces include two edge grommets, centered on back edges of worksurface, with maximum clearance of 1 5 /8. Wood grain laminate is not available on 60 Wx60 D corner worksurfaces. 138

139 Currents worksurfaces for extended corner 3/8 wire drop and grommet extended left description w d h pattern no. lam. 24 D both sides - Corner worksurfaces, extended left AWM2 C6036 S ( )( ) $ AWM2 C6042 S ( )( ) AWM2 C6048 S ( )( ) AWM2 C7236 S ( )( ) AWM2 C7242 S ( )( ) AWM2 C7248 S ( )( ) AWM2 C8448 S ( )( ) 1, D both sides - Corner worksurfaces, extended left AWM2 C6048 D ( )( ) AWM2 C7248 D ( )( ) 1, AWM2 C8448 D ( )( ) 1, D left/30 D right - Corner worksurfaces, extended left 30 D left/24 D right - Corner worksurfaces, extended left AWM2 C6042 R ( )( ) AWM2 C6048 R ( )( ) AWM2 C7242 R ( )( ) AWM2 C7248 R ( )( ) 1, AWM2 C8448 R ( )( ) 1, AWM2 C6042 L ( )( ) AWM2 C6048 L ( )( ) AWM2 C7242 L ( )( ) AWM2 C7248 L ( )( ) 1, AWM2 C8448 L ( )( ) 1,165. Worksurface Planning Example: AWM2 C6036S AWM2 Worksurface C Corner 60 Width left 36 Width right S Depth left and right 119 Top finish 119 Trim finish Dimensions shown in w column are nominal width of left back edge. Dimensions shown in d column are nominal width of right back edge. Worksurface depths: S 24 D both sides L 30 D left/24 D right R 24 D left/30 D right Specify top finish first, followed by trim finish. Please refer to the Currents price list for finishes. Veneer finishes for Currents worksurfaces for are available through Custom Product Development. Worksurfaces are sized for panel-based applications and may be supported by panel-planning brackets or end-supported and cantilevered from Currents wall. Extended side may also be supported with Currents C-legs. Underside of worksurface is drilled to accept all panel-planning brackets, and Currents pedestals, worksurface stiffeners and Currents C-leg on the extended side. AWM2- worksurfaces are supported by brackets with wood screws. When using end support brackets, order MB3-EC18, 24 or 30. Currents worksurfaces for require stiffener when the span between structural supports exceeds 36. Specify worksurface stiffeners and supports separately (page 142). Currents worksurfaces for cannot be used in conjunction with Network desk supports. Actual worksurface is 3 /8 less than nominal 24 and 30 for cable clearance. All worksurfaces include two edge grommets, centered on back edges of worksurface, with maximum clearance of 1 5/8. 139

140 Currents worksurfaces for extended corner 3/8 wire drop and grommet extended right description w d h pattern no. lam. 24 D both sides - Corner worksurfaces extended right AWM2 C3660 S ( )( ) $ AWM2 C3672 S ( )( ) AWM2 C4260 S ( )( ) AWM2 C4272 S ( )( ) AWM2 C4860 S ( )( ) AWM2 C4872 S ( )( ) AWM2 C4884 S ( )( ) 1, D both sides - Corner worksurfaces extended right AWM2 C4860 D ( )( ) AWM2 C4872 D ( )( ) 1, AWM2 C4884 D ( )( ) 1, D left/30 D right - Corner worksurfaces extended right 30 D left/24 D right - Corner worksurfaces extended right AWM2 C4260 R ( )( ) AWM2 C4272 R ( )( ) AWM2 C4860 R ( )( ) AWM2 C4872 R ( )( ) 1, AWM2 C4884 R ( )( ) 1, AWM2 C4260 L ( )( ) AWM2 C4272 L ( )( ) AWM2 C4860 L ( )( ) AWM2 C4872 L ( )( ) 1, AWM2 C4884 L ( )( ) 1,165. Example: AWM2 C3660S AWM2 Worksurface C Corner 36 Width left 60 Width right S Depth left and right 119 Top finish 119 Trim finish Dimensions shown in w column are nominal width of left back edge. Dimensions shown in d column are nominal width of right back edge. Worksurface depths: S 24 D both sides L 30 D left/24 D right R 24 D left/30 D right Specify top finish first, followed by trim finish. Please refer to the Currents price list for finishes. Veneer finishes for Currents worksurfaces for are available through Custom Product Development. Worksurfaces are sized for panel-based applications and may be supported by panel-planning brackets or end-supported and cantilevered from Currents wall. Extended side may also be supported with Currents C-legs. Underside of worksurface is drilled to accept all panel-planning brackets, and Currents pedestals, worksurface stiffeners and Currents C-leg on the extended side. AWM2- worksurfaces are supported by brackets with wood screws. When using end support brackets, order MB3-EC18, 24 or 30. Currents worksurfaces for require stiffener when the span between structural supports exceeds 36. Specify worksurface stiffeners and supports separately (page 142). Currents worksurfaces for cannot be used in conjunction with Network desk supports. Actual worksurface is 3 /8 less than nominal 24 and 30 for cable clearance. All worksurfaces include two edge grommets, centered on back edges of worksurface, with maximum clearance of 1 5/8. 140

141 Currents worksurfaces for P-shape 3/8 wire drop and grommet description w d h pattern no. lam. P-shape surfaces, extended left AWM2 P7548 S ( )( ) $1, AWM2 P8748 S ( )( ) 1,234. P-shape surfaces, extended right AWM2 P4875 S ( )( ) 1, AWM2 P4887 S ( )( ) 1,234. Worksurface Planning Example: AWM2 P7548 S AWM2 Worksurface P P-shape 75 Width left 48 Width right S Depth of return 119 Top finish 119 Trim finish Specify top finish first, followed by trim finish. Please refer to the Currents price list for finishes. Veneer finishes for Currents worksurfaces for are available through Custom Product Development. Worksurfaces are sized for panel-based applications and may be supported by panel-planning brackets. P-shaped worksurfaces may be supported with brackets or cantilevered from Currents service wall along 48 edge, and supported bya24 D Currents C-leg at conference end. Specify supports separately. AWM2- worksurfaces are supported by brackets with wood screws. All P-shaped worksurfaces correspond to a 24 D adjacent straight or corner worksurface. Currents worksurfaces for cannot be used in conjunction with Network desk supports. Actual worksurface depth is 3 /8 less than nominal for cable clearance. All worksurfaces include one edge grommet, centered at rear of worksurface, with maximum clearance of 1 5 /8. For 90 application span, use two AWB-S42 stiffeners. For 96 application span, use two AWB-S48 stiffeners. Currents worksurfaces for require stiffener when the span between structural supports exceeds 36. Specify worksurface stiffeners and supports separately (page 142). When using end support brackets, order MB3-EC18, 24 or

142 Currents worksurfaces for stiffeners description type w d h pattern no. list Stiffener for straight and corner worksurfaces /2 2 AWM1 S36 $ /2 2 AWM1 S /2 2 AWM1 S /2 2 AWM1 S /2 2 AWM1 S /2 2 AWM1 S /2 2 AWM1 S /2 2 AWM1 S Example: AWM1 S48 AWM1 Worksurface S Stiffener 48 Type Currents worksurfaces for require stiffener when the span between structural supports exceeds 36. Specify worksurface stiffeners and supports separately. When using end support brackets, order MB3-EC18, 24 or 30. Currents worksurfaces for cannot be used in conjunction with Network desk supports. For 90 application span, use two AWM1-S42 stiffeners. 142 For 96 application span, use two AWM1-S48 stiffeners. Stiffener mounts 18 from front edge of worksurface and will interfere with mobile or floorstanding pedestals greater than 18 deep. To accommodate a floorstanding pedestal greater than 18 deep at one end of worksurface, specify stiffener for 12 narrower worksurface. To accommodate two floorstanding pedestals or double-wide at one end of worksurface, specify stiffener for 24 narrower worksurface.

143 Cascade edge worksurfaces Rectangular description w d h pattern no. Solid woodgrain 24 D Rectangular /8 MCE1R2424N $213. $ /8 MCE1R3024N /8 MCE1R3624N /8 MCE1R4224N /8 MCE1R4824N /8 MCE1R5424N /8 MCE1R6024N /8 MCE1R6624N /8 MCE1R7224N /8 MCE1R7824N /8 MCE1R8424N /8 MCE1R9024N /8 MCE1R9624N D Rectangular /8 MCE1R2430N /8 MCE1R3030N /8 MCE1R3630N /8 MCE1R4230N /8 MCE1R4830N /8 MCE1R5430N /8 MCE1R6030N /8 MCE1R6630N /8 MCE1R7230N /8 MCE1R7830N /8 MCE1R8430N /8 MCE1R9030N /8 MCE1R9630N Worksurface Planning Example: MCE1R4824N, 118 MCE1 Cascasde edge worksurface R Rectangular 48 Width 24 Depth N No grommets 118 Surface finish Specify: Grommet / No grommet. Replace the N suffix from the pattern number with G. Add $20. Finish: Solid: 114 Folkstone Grey 117 Soft Grey 118 Bright White 119 Pumice Woodgrain: 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Cascade Edge worksurfaces are wrapped with a pvc free, 3D laminate sheet heated and pressed around an FSC certified substrate. 3D laminate is more susceptible to denting, impact, tearing and marring than conventional high pressure laminate and should be handled with care. Do not drag worksurfaces across any flooring surface. Treat Cascade Edge worksurfaces like veneer worksurfaces for optimum performance under normal conditions. Cascade Edge worksurfaces have a 10 year warranty that covers defects in workmanship and materials. This warranty does not cover damage occurring during or after installation. Cascade Edge are not drilled for wire management clips, pedestals or brackets. Worksurfaces are 1 /16 less then nominal width and 3/8 less than nominal depth for rear wire clearance. Edge grommets are centered at rear edge of worksurface for maximun clearance of 1 3 /8 Worksurfaces require support every 48 in width. All supporting hardware is ordered separately. Worksurfaces may be supported at each end by pedestals or end support EC brackets and cantilever brackets matching the worksurface depth. Panel supported worksurfaces over 48 must be mid-span supported by cantilever brackets, specified separately. Order brackets with wood screws ( suffix-w). Cascade Edge worksurfaces are for panel-based planning only and cannot be used in conjunction with Network desk supports. 143

144 Cascade edge worksurfaces Blended D description A B C h pattern no. solid woodgrain Blended D right hand shown /8 MCE1BD6648S(L/R) $863. $ /8 MCE1BD6648D(L/R) , /8 MCE1BD7248S(L/R) , /8 MCE1BD7248D(L/R) , /8 MCE1BD7848S(L/R) 1,019. 1, /8 MCE1BD7848D(L/R) 1,054. 1, /8 MCE1BD8448S(L/R) 1,047. 1, /8 MCE1BD8448D(L/R) 1,113. 1,279. Example: MCE1BD7248SL-118 MCE1 Cascade edge worksurface BD Blended D 72 Width 48 Depth S 24 d return L Extended left 118 Surface finish Finish: Solid: 114 Folkstone Grey 117 Soft Grey 118 Bright White 119 Pumice Woodgrain: 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Cascade Edge worksurfaces are wrapped with a pvc free, 3D laminate sheet heated and pressed around an FSC certified substrate. 3D laminate is more susceptible to denting, impact, tearing and marring than conventional high pressure laminate and should be handled with care. Do not drag worksurfaces across any flooring surface. Treat Cascade Edge worksurfaces like veneer worksurfaces for optimum performance under normal conditions. Cascade Edge worksurfaces have a 10 year warranty that covers defects in workmanship and materials. This warranty does not cover damage occurring during or after installation. Worksurfaces are 1 /16 less than nominal width and 3 /8 less than moninal depth for rear wire clearance. Edge grommets are centered at rear edge of worksurface for maximun clearance of 1 3 /8 Worksurfaces require support every 48 in width. All support hardward is ordered separately. Blended-D worksurfaces are supported by a 48 VDT support bracket kit in conjunction with a rounded end support column. Use flat bracket or bridging bracket to join to adjacent worksurface. Order brackets with wood screws (suffix -W). Cascade Edge are not drilled for wire management clips, pedestals or brackets. Cascade Edge worksurfaces are for panel-based planning only and cannot be used in conjunction with Network desk supports. 144

145 Cascade edge worksurfaces Curvilinear Corner description A B C h pattern no solid woodgrain Curvilinear corner /8 MCE1L3636SSN $533. $ /8 MCE1L4242SSN /8 MCE1L4242SDN /8 MCE1L4242DSN /8 MCE1L4848SSN /8 MCE1L4848SDN /8 MCE1L4848DSN /8 MCE1L4848DDN Worksurface Planning Example: MCE1L4848SSG-114 MCE1 Cascade edge worksurface L Curvilinear L top 48 Width 48 Depth S 24 d, left side S 24 d, right side G Grommet 114 Surface finish L Grain direction Specify: Grommet / no grommet. Replace the N suffix from the pattern number with G. Add $40. Finish: Solid: 114 Folkstone Grey 117 Soft Grey 118 Bright White 119 Pumice Woodgrain: 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Note: When wood grain or brushed finishes are specified on Cascade corner worksurfaces with two A sides of equal length that do not exceed 42 you must select one of three grain direction options. Insert the desired grain direction L = Left hand, R = Right hand or D = Diagonal after the worksurface finish code to indicate the appropriate grain direction. When the D option is selected please add $25.00 to the worksurface list price. 48 Cascade corners are not available with a diagonal grain option. 145 Cascade Edge worksurfaces are wrapped with a pvc free, 3D laminate sheet heated and pressed around an FSC certified substrate. 3D laminate is more susceptible to denting, impact, tearing and marring than conventional high pressure laminate and should be handled with care. Do not drag worksurfaces across any flooring surface. Treat Cascade Edge worksurfaces like veneer worksurfaces for optimum performance under normal conditions. Cascade Edge worksurfaces have a 10 year warranty that covers defects in workmanship and materials. This warranty does not cover damage occurring during or after installation. Cascade Edge worksurfaces and are not drilled for wire management clips, pedestals or brackets. Cascade Edge worksurfaces are for panel-based planning only and cannot be used in conjunction with Network desk supports. Worksurfaces are 1 /16 less than nominal width and 3/8 less than nominal depth for rear wire clearance. Edge grommets are centered at rear edge of worksurface for maximun clearance of 1 3 /8 Worksurfaces require support every 48 in width. All supporting hardware is ordered separately. Worksurfaces may be supported by left or right hand 18 cantilever brackets at the rear corner, and cantilever bridging brackets on each side edge. Panel supported worksurfaces over 48 must be mid-span supported by cantilever brackets, specified separately. Order brackets with wood screws (suffix -W ).

146 Cascade edge worksurfaces Blended L description B C A D h pattern no. solid woodgrain Blended L /8 MCE1L4260SSN $884. $1, /8 MCE1L4266SSN , /8 MCE1L4272SSN , /8 MCE1L4278SSN , /8 MCE1L4860SSN , /8 MCE1L4860SDN , /8 MCE1L4860DSN , /8 MCE1L4866SSN , /8 MCE1L4866SDN , /8 MCE1L4866DSN , /8 MCE1L4872SSN , /8 MCE1L4872SDN , /8 MCE1L4872DSN , /8 MCE1L4878SSN 1,060. 1, /8 MCE1L4884SSN 1,191. 1, /8 MCE1L6042SSN , /8 MCE1L6048SSN , /8 MCE1L6048SDN , /8 MCE1L6048DSN , /8 MCE1L6642SSN , /8 MCE1L6648SSN , /8 MCE1L6648SDN , /8 MCE1L6648DSN , /8 MCE1L7242SSN , /8 MCE1L7248SSN , /8 MCE1L7248SDN , /8 MCE1L7248DSN ,113. Example: MCE1L4872SDG-114 MCE1 Cascade edge worksurface L Blended L top 48 Depth 72 Width S 24 d return left D 30 d return right G Grommet 114 Surface finish Specify: Grommet / no grommet. Replace the N suffix from the pattern number with G. Add $40. Finish: Solid: 114 Folkstone Grey 117 Soft Grey 118 Bright White 119 Pumice Woodgrain: 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Cascade Edge worksurfaces are wrapped with a pvc free, 3D laminate sheet heated and pressed around an FSC certified substrate. 3D laminate is more susceptible to denting, impact, tearing and marring than conventional high pressure laminate and should be handled with care. Do not drag worksurfaces across any flooring surface. Treat Cascade Edge worksurfaces like veneer worksurfaces for optimum performance under normal conditions. Cascade Edge worksurfaces have a 10 year warranty that covers defects in workmanship and materials. This warranty does not cover damage occurring during or after installation. Cascade Edge worksurfaces and are not drilled for wire management clips, pedestals or brackets. Worksurfaces are 1 /16 less than nominal width and 3 /8 less than nominal depth for rear wire clearance. Edge grommets are centered at rear edge of worksurface for maximun clearance of 1 3 /8 Worksurfaces require support every 48 in width. All supporting hardware is ordered separately. Worksurfaces may be supported by left or right hand 18 cantilever brackets at the rear corner, and cantilever bridging brackets on each side edge. Panel supported worksurfaces over 48 must be mid-span supported by cantilever brackets, specified separately. Order brackets with wood screws (suffix -W ). Cascade Edge worksurfaces are for panel-based planning only and cannot be used in conjunction with Network desk supports. 146

147 Cascade edge worksurfaces Blended L description B C A D h pattern no. solid woodgrain Blended L /8 MCE1L7842SSN $953. $1, /8 MCE1L7848SSN 1,060. 1, /8 MCE1L8448SSN 1,191. 1,371. Worksurface Planning Example: MCE1L4872SDG-114 MCE1 Cascade edge worksurface L Blended L top 48 Depth 72 Width S 24 d return left D 30 d return right G Grommet 114 Surface finish Specify: Grommet / no grommet. Replace the N suffix from the pattern number with G. Add $40. Finish: Solid: 114 Folkstone Grey 117 Soft Grey 118 Bright White 119 Pumice Woodgrain: 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Cascade Edge worksurfaces are wrapped with a pvc free, 3D laminate sheet heated and pressed around an FSC certified substrate. 3D laminate is more susceptible to denting, impact, tearing and marring than conventional high pressure laminate and should be handled with care. Do not drag worksurfaces across any flooring surface. Treat Cascade Edge worksurfaces like veneer worksurfaces for optimum performance under normal conditions. Cascade Edge worksurfaces have a 10 year warranty that covers defects in workmanship and materials. This warranty does not cover damage occurring during or after installation. Cascade Edge worksurfaces and are not drilled for wire management clips, pedestals or brackets. Worksurfaces are 1 /16 less than nominal width and 3 /8 less than nominal depth for rear wire clearance. Edge grommets are centered at rear edge of worksurface for maximun clearance of 1 3 /8 Worksurfaces require support every 48 in width. All supporting hardware is ordered separately. Worksurfaces may be supported by left or right hand 18 cantilever brackets at the rear corner, and cantilever bridging brackets on each side edge. Panel supported worksurfaces over 48 must be mid-span supported by cantilever brackets, specified separately. Order brackets with wood screws (suffix -W ). Cascade Edge worksurfaces are for panel-based planning only and cannot be used in conjunction with Network desk supports. 147

148 Cascade edge worksurfaces Half round and Corner round description w d h pattern no. solid woodgrain Half Round 50 1 /4 notched for panel /8 MCE1H4818P $461. $ /4 notched for panel /8 MCE1H6024P /8 MCE1H /8 MCE1H D- RH Corner Round /8 MCE1CR24R D- LH Corner Round /8 MCE1CR24L D - Notched Corner Round 24 notched /8 MCE1CR24N Sample /8 MCE1R1212G Example: MCE1H4818P-117 MCE1 Cascade edge worksurface H Half round 48 Width 18 Depth P Notched for panel 117 Surface finish Specify: Finish: Solid: 114 Folkstone Grey 117 Soft Grey 118 Bright White 119 Pumice Woodgrain: 124 Medium Cherry 125 Natural Maple 126 Natural Cherry 127 Walnut Cascade Edge worksurfaces are wrapped with a pvc free, 3D laminate sheet heated and pressed around an FSC certified substrate. 3D laminate is more susceptible to denting, impact, tearing and marring than conventional high pressure laminate and should be handled with care. Do not drag worksurfaces across any flooring surface. Treat Cascade Edge worksurfaces like veneer worksurfaces for optimum performance under normal conditions. Cascade Edge worksurfaces have a 10 year warranty that covers defects in workmanship and materials. This warranty does not cover damage occurring during or after installation. Cascade Edge worksurfaces are are not drilled for wire management clips, pedestals or brackets. Worksurfaces are 1 /16 less than nominal width and 3 /8 less than nominal depth for rear wire clearance. Worksurfaces require support every 48 in width. All supporting hardware is ordered separately. Half Round: Half round worksurfaces may be supported by cantilever bridging brackets in conjunction with a rounded end support column. Corner Round: Notched corner round worksurfaces are supported by cantilever bridging brackets on both side edges. End run Left- and Right-handed corner round worksurfaces are supported by a combination of an end bracket along the panel edge and a cantilever bridging bracket to the adjacent worksurface side edge. Order brackets with wood screws ( suffix -W ). Cascade Edge worksurfaces are for panel-based planning only and cannot be used in conjunction with Network desk supports. 148