TOKEN ELECTRONICS IND. CO., LTD.

Transcription

1 TON LTRONS N. O., LT. ONSTY PRTON SRN atalogue of Power Resistors No. 137, Sec. 1, hung Shin Rd., Wu u siang,taipei sien,taiwan, R.O. TL: X: ontact: token@token.com.tw Support: support@tokenonline.net omepage:

2 TON MNS QULTY N SRV NX R Series Of Non-lammable Wire-Wound Power Resistors R Type 10W -1300W Tubular eramic, ixed-type Wire-Wound Resistor R Type 100W -250W Tubular eramic, -Shaped Wire-Wound Resistor NR Type 50W -1300W Tubular eramic, Low nductive Wire-Wound Resistor SR Type 20W -1300W Tubular eramic, Variable Wire-Wound Resistor Q Series Of Non lammable Wave-Shape Ribbon-Wound Power Resistors QR Type 75W -2000W Tubular eramic, Wave-Type Wire-Wound Resistor QN Type 75W -2000W Tubular ceramic, wave, low inductive wire-wound resistor QS Type 75W -2000W Tubular eramic, Wave, Variable Wire-Wound Resistor ZR Series Of Non-lammable lat Wire-Wound Power Resistors ZZR Type 40W -300W lat eramic orm, Set-Type, Wire-Wound Resistor ZQR Type 60W -450W lat eramic orm, Wave-Type Wire-Wound Resistor ZNR Type 40W-300W lat eramic orm, Set-Type, Low nductive Wire-Wound Resistor ZQN Type 60W-450W lat eramic orm, Wave-Type, Low nductance Resistor L Series Of Large apacity Metal-lad Power Resistors SQ Type igh Voltage, luminum ncased Resistor S Type igh Voltage, luminum ncased Resistor SZ Type igh Voltage, luminum ncased Resistor VR Series Of Variable Wire-Wound Power Resistors VR Type 25W-100W ST Series Of Wire-Wound Starter Power Resistors ST Type 500W Tubular eramic, Starter Wire-Wound Resistor ST Type 600W-1000W Tubular eramic, Starter Wire-Wound Resistor SS Series Of Slide-Type Wire-Wound Power Resistors SR Type 200W -1300W Slide-Type Wave, Variable Wire-Wound Resistor SQ Type 300W -2000W Slide-Type Wave, Variable Wire-Wound Resistor ssembly-type Load Resistor ox R Type 200W-3200W igh Voltage, ssembly-type Resistance ox QR Type 300W-4800W igh Voltage, ssembly-type Resistance ox Phone: ax: mail: token@token.com.tw Page 1/14

3 TON MNS QULTY N SRV NON-LMML WR-WOUN POWR RSSTORS R RSSTOR SRS tubular ceramic resistor has two terminals, and is wound with copper wire or chromium alloy wire to provide the resistance and then coated with a high temperature, non-flammable resin. fter the semi-finished resistor is cool and dry, insulation is applied through a high-temperature process and the mounts are attached. Since the winding is excellent, many taps can be added, impedance is low and the r shape can be altered to produce many types of resistors. These resistors are suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments, automation control installations, etc. or custom specifications, please contact us to discuss the details. R TYP 10W -1300W Tubular eramic, ixed-type Wire-Wound Resistor Rating L M N O Range ( ) 10W ~3 20W ~7 30W ~10 40W ~13 50W ~25 60W ~30 80W ~40 100W ~50 120W ~60 150W ~75 160W ~80 200W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~750 N M Q P L O R TYP 100W -250W Tubular eramic, -Shaped Wire-Wound Resistor Rating Range ( ) 100W W W W W OW TO ORR R 1000W 500 Product Type. Rated Power. Resistance Value. ( ) Resistance R type 10W~1300W ( ) ndicates resistance value in =±5% R type 100W~250W units of ohms. =±10% ssembly Method. 2-8 part assembly - orizontal mount N- No mounts. Z- Vertical mount. Phone: ax: mail: token@token.com.tw Page 2/14

4 NR TYP 50W -1300W TON MNS QULTY N SRV Tubular eramic, Low nductive Wire-Wound Resistor Rating L M N O Range ( ) 50W ~10 60W ~12 80W ~16 100W ~20 120W ~24 150W ~30 160W ~35 200W ~40 250W ~50 300W ~60 400W ~80 500W ~ W ~ W ~ W ~ W ~ W ~260 N P Q L O SR TYP 20W -1300W Tubular eramic, Variable Wire-Wound Resistor Rating L M N O Range ( ) 20W ~1 30W ~1.5 40W ~2 50W ~5 60W ~6 80W ~8 100W ~10 120W ~12 150W ~15 160W ~16 200W ~20 250W ~25 300W ~30 400W ~40 500W ~50 600W ~60 700W ~70 800W ~ W ~ W ~130 N Q M P O L OW TO ORR SR 400W 100 Product Type. Rated Power. Resistance Value. ( ) Resistance NR type 50W~1300W ( ) ndicates resistance value in =±5% SR type 20W~1300W units of ohms. =±10% ssembly Method. 2-8 part assembly - orizontal mount N- No mounts. Z- Vertical mount. Phone: ax: mail: token@token.com.tw Page 3/14

5 TON MNS QULTY N SRV PRORMN SPTONS Test tem Test Methods haracteristics Resistance tolerance S Resistance Nominal Tolerance 1 R 1>R ±5% () ±10% () Temperature coefficient S ±200ppm/ max. Power rating load S R/R ±(0.5%+0.1 ) Surface temperature up 350 max. Short-term overload S ree of appearance or structural irregularity 1000% rated power 5 seconds R/R ±(2%+0.1 ) nsulation resistance S V 100M min ielectric withstanding voltage S V 1 minute etween terminal and anchor stand Terminal strength S g 30 seconds Resistor strength S g 30 seconds Vibration S m/m 10 ~ 50 ~ 10 z/min X-Y-Z 2 hours each Thermal shock S Room temp. 30 minutes ON minutes O umidity S %R 240 hours Load life S minutes ON 30 minutes O 500 hours lame retardation S % - 600% rated power load Remarks OW TO ORR ree of appearance or structural irregularity R/R ±(0.1%+0.05 ) ree of appearance or structural irregularity ree of appearance or structural irregularity ree of appearance or structural irregularity surface coating crack. R/R ±(1%+0.05 ) Resistor free of structural irregularity R/R ±(2%+0.1 ) ree of appearance or structural irregularity surface coating crack R/R ±(3%+0.1 ) ree of appearance or structural irregularity surface coating crack R/R ±(3%+0.1 ) US UL-94 flame retardation test V-0 grade noncombustible 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier. NR 600W 500 Product Type. Rated Power. Resistance Value. ( ) Resistance R type 10W~1300W ( )ndicates resistance value =±5% NR type 50W~1300W in units of ohms. =±10% SR type 20W~1300W R type 100W~250W ssembly Method. 2-8 part assembly - orizontal mount N- No mounts. Z- Vertical mount. Phone: ax: mail: token@token.com.tw Page 4/14

6 TON MNS QULTY N SRV NON LMML WV-SP RON-WOUN POWR RSSTORS Q RSSTOR SRS tubular ceramic resistor has two terminals, and is wound with a resistance element consisting of a wave-shaped alloy ribbon. high temperature, non-flammable resin insulation is applied after cooling and drying through a high temperature process and then the component mounts are attached. The resistance value range is relatively low due to alloy material limitations; see the R resistor series if high resistance values are required. This product supports the use of numerous taps, has is low impedance, and can be fabricated in various shapes to support a wide range of resistor applications. These +resistors are suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments, automation control installations, etc. or custom specifications, please contact us to discuss the details. QR TYP 75W -2000W Tubular eramic, Wave-Type Wire-Wound Resistor Rating L M O Range ( ) 75W ~8 90W ~9 120W ~12 150W ~15 180W ~18 225W ~23 240W ~24 300W ~30 375W ~38 450W ~45 600W ~60 750W ~75 900W ~ W ~ W ~ W ~ W ~200 N Q M P L O QN TYP 75W -2000W Tubular ceramic, wave, low inductive wire-wound resistor Rating L M O Range ( ) 75W ~8 90W ~9 120W ~12 150W ~15 180W ~18 225W ~23 240W ~24 300W ~30 375W ~38 450W ~45 600W ~60 750W ~75 900W ~ W ~ W ~ W ~ W ~200 Phone: ax: mail: token@token.com.tw Page 5/14

7 QS TYP 75W -2000W TON MNS QULTY N SRV Tubular eramic, Wave, Variable Wire-Wound Resistor Rating L M O Range ( ) 75W ~8 90W ~9 120W ~12 150W ~15 180W ~18 225W ~23 240W ~24 300W ~30 375W ~38 450W ~45 600W ~60 750W ~75 900W ~ W ~ W ~ W ~ W ~200 N M Q P L O PRORMN SPTONS Test tem Test Methods haracteristics Resistance tolerance S Resistance Nominal Tolerance 1 R 1>R ±5% () ±10% () Temperature coefficient S ±400PPM/ MX Power rating load S R/R ±(0.5%+0.1 ) Surface temperature up 350 MX Short-term overload S ree of appearance or structural irregularity 500% rated power 5 seconds R/R ±(2%+0.1 ) nsulation resistance S V 100M min. ielectric withstanding voltage S V 1 minute etween terminal and anchor stand ree of appearance or structural irregularity R/R ±(0.1%+0.05 ) Terminal strength S g 30 seconds ree of appearance or structural irregularity Resistor strength S g 30 seconds ree of appearance or structural irregularity Vibration S ree of appearance or structural irregularity Surface coating crack 1.5m/m 10 ~ 50 ~ 10 z/min X-Y-Z R/R ±(1%+0.05 ) 2 hours each Thermal shock S Room temp 30 minutes ON minutes O umidity S %R 240 hours Resistor free of structural irregularity R/R ±(1%+0.05 ) ree of appearance or structural irregularity Surface coating crack R/R ±(3%+0.1 ) Load life S ree of appearance or structural irregularity Surface coating crack 90 minutes ON-30 minutes O500 R/R ±(5%+0.1 ) hours lame retardation S % - 600% rated power load US UL-94 flame retardation test V-0 grade noncombustible Remarks 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier. OW TO ORR QS 2000W 32 Product Type. Rated Power. Resistance Value. ( ) Resistance QR type 75W~2000W ( ) ndicates resistance =±3% QN type 75W~2000W value in units of ohms =±5% QS type 75W~2000W =±10% ssembly Method. 2-8part-assembly -orizontal mount N-No mounts. Z-Vertical mount. Phone: ax: mail: token@token.com.tw Page 6/14

8 TON MNS QULTY N SRV NON-LMML LT WR-WOUN POWR RSSTORS ZR RSSTOR SRS flat tubular ceramic has two terminals and is wound with either copper wire or chromium alloy wire as a resistant is coated with a high-temperature non-flammable resin. When cooled and dried, it is encapsulated in insulation through a high-temperature process before the final installation of the component mounts. t is mainly utilized for industrial installations where height is limited. ue to the excellent windings, many taps can be added, impedance is low, and P board is insert able, and usable for many other integrated applications. These resistors are suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments, automation control installations, etc. or custom specifications, please contact us to discuss the details. ZZR TYP 40W -300W lat eramic orm, Set-Type, Wire-Wound Resistor Rating Range ( ) 40W ~5 55W ~6 70W ~7 95W ~10 100W ~12 120W ~15 150W ~18 200W ~25 250W ~30 300W ~35 ZQR TYP 60W -450W lat eramic orm, Wave-Type Wire-Wound Resistor Rating Range ( ) 60W ~4 80W ~5 100W ~7 140W ~9 150W ~10 180W ~12 225W ~15 300W ~20 375W ~25 450W ~30 OW TO OR ZZR 55W 10 Product Type. Rated Power. Resistance Value. ( ) Resistance ZZR type 40W~300W ( ) ndicates resistance value =±3% ZQR type 60W~450W in units of ohms. =±5% =±10% ssembly Method. 2-8part-assembly -orizontal mount N-No mounts. Z-Vertical mount. Phone: ax: mail: token@token.com.tw Page 7/14

9 ZNR TYP 40W-300W TON MNS QULTY N SRV lat eramic orm, Set-Type, Low nductive Wire-Wound Resistor Rating Range ( ) 40W ~2 55W ~2.5 70W ~3 95W ~ W ~ W ~7 150W ~ W ~12 250W ~14 300W ~16 ZQN TYP 60W-450W lat eramic orm, Wave-Type, Low nductance Resistor Rating Range ( ) 60W ~4 80W ~5 100W ~7 140W ~9 150W ~10 180W ~12 225W ~15 300W ~20 375W ~25 450W ~30 OW TO ORR ZNR 300W 500 Product Type. Rated Power. Resistance Value. ( ) Resistance ZNR type 40W~300W ( ) ndicates resistance value =±3% ZQN type 60W~450W in units of ohms. =±5% =±10% ssembly Method. 2-8part-assembly -orizontal mount N-No mounts. Z-Vertical mount. Phone: ax: mail: token@token.com.tw Page 8/14

10 TON MNS QULTY N SRV LR PTY MTL-L POWR RSSTORS L RSSTOR SRS n aluminum-encased resistor consists of an alloy metal coil-type resistance element assembled into an aluminum enclosure. ollowing high-temperature anodization, the enclosure is filled with a special non-flammable cement paste and after hardening, insulation is applied thro a high-temperature process Since the resistor is embedded in the heat-proof cement, it is not affected by external mechanical force, dusty environments, and extreme duty. t is durable, vibration-proof, dissipates heat well, and has a low temperature coefficient, with resistance varying in direct proportion. Supporting a flexible range of applications, the product is easy to utilize and install. pplications include industrial machinery, load testing, electric power distribution, instruments, and automated control installations. or custom specifications, please contact us to discuss the details. PRORMN SPTONS Test tem Test Methods haracteristics Resistance tolerance S Tolerance resistance±10% () Temperature coefficient S ±200PPM/ max. Power rating load S R/R ±(0.5%+0.1 ) Surface temperature up 350 max. Short-term overload S ree of appearance or structural irregularity 1000% rated power 5 seconds R/R ±(2%+0.1 ) nsulation resistance S V 100M min. ielectric withstanding Voltage S V 1 minute ree of appearance or structural irregularity R/R ±(0.1%+0.05 ) Terminal strength S g 30 seconds ree of appearance or structural irregularity Resistor strength S g 30 seconds ree of appearance or structural irregularity Vibration S ree of appearance or structural irregularity surface coating crack. R/R 5m/m 10 ~ 50 ~ 10 z/min ±(1%+0.05 ) X-Y-Z 2 hours each Thermal shock S Room temp. 30 minutes ON minutes O umidity S %R 240 hours Load life S minutes ON - 30 minutes O 500 hours lame retardation S % - 600% rated power load Remarks SQ TYP Resistor free of structural irregularity R/R ±(2%+0.1 ) ree of appearance or structural irregularity surface coating crack. R/R ±(3%+0.1 ) ree of appearance or structural irregularity surface coating crack. R/R ±(3%+0.1 ) US UL-94 flame retardation test V-0 grade noncombustible 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier. VOLT, LUMNUM NS RSSTOR Power imensions (m/m) Weight Resistance Rating Range ( ) 60W mm² /g W mm² /g W mm² /g 1-10 Phone: ax: mail: token@token.com.tw Page 9/14

11 TON MNS QULTY N SRV S TYP VOLT, LUMNUM NS RSSTOR Power imensions (m/m) Weight Resistance Rating Range ( ) 200W M5x8mm mm2 725/g W M5x8mm mm2 1050/g W M5x8mm mm2 1295/g W M5x8mm mm2 1650/g W M5x8mm mm2 1935/g 1-10 SZ TYP VOLT, LUMNUM NS RSSTOR W L2 L1 L3 Power imensions (m/m) Weight Resistance Rating W±1 ±1 L1±2 L2±2 ±0.5 L3±10 Range ( ) 60W /g W /g W /g W /g W /g W /g W /g W /g W /g W /g 5-10 OW TO ORR Product Type. SQ type S type SZ type SQ 400W 20 N Power Rated. 60W~120W 200W~600W 60W~800W Resistance Value. ( ) ( ) ndicates resistance value in units of ohms. Resistance =±5% =±10% ssembly Method. -orizontal mount N-No mounts. Z-Vertical mount. Phone: ax: mail: token@token.com.tw Page 10/14

12 TON MNS QULTY N SRV VRL WR-WOUN POWR RSSTORS VR RSSTOR SRS -shaped ceramic or chromium-alloy wire as a resistance element. xcept for the slide contact surface, the entire component is coated with a high-temperature, non-flammable resin. fter cooling and drying, insulation is applied through a high-temperature process. Then, a centered rotating adjuster component is installed, which slides along the resistance element and varies the resistance to the desired value. The scope of the application includes educational modeling, load simulations, industrial machinery RPM adjustment, voltage and current adjustment, instruments, and automated control installations. or custom specifications, please contact us to discuss the details. VR TYP 25W-100W Power imensions (m/m) Weight Resistance Rating Range ( ) 25W /8 6x /g W /8 6x /g W /8 6x /g 10-5 PRORMN SPTONS Test tem Test Methods haracteristics Resistance tolerance S Resistance tolerance ±10% nsulation resistance S V 100M min ielectric withstanding voltage S V 1 minute etween terminal and axis ree of appearance or structural irregularity Terminal strength S ree of appearance or structural irregularity 3g 30 seconds R/R ±(2%+0.1 ) Vibration S m/m 10 ~ 50 ~ 10 ree of appearance or structural irregularity z/min X-Y-Z 2 hours each R/R ±(2%+0.1 ) Load life S ree of appearance or structural irregularity R/R ±(5%+0.1 ) ull gyration angle S ±5 lame retardation 100% - 600% rated power load US UL-94 flame retardation test V-0 grade noncombustible Remarks 1. Resistance and resistance tolerance were tested in-house with micro resistance meter. 2. Resistor coating refers to UL-certified data provided by supplier. OW TO ORR VR 25W 2.5 Product Type. Rated Power. Resistance Value. ( ) Resistance VR type 25W~100W ( ) ndicates resistance value in =±10% units of ohms. Phone: ax: mail: token@token.com.tw Page 11/14

13 TON MNS QULTY N SRV WR-WOUN STRTR POWR RSSTORS ST RSSTOR SRS tubular ceramic resistor has a fixed number of windings and is wound with alloy wire as a resistance element. The staggering wound is made according to the desired resistance value, followed by the placement of the component mounts. t provides high starter resistor power and is durable, is high temperature-resistant, dissipates heat well, has a low temperature coefficient that varies in direct proportion, and is suitable for application loads involving brief current surges. ue to the set number of windings on the ceramic form, the resistance value range is relatively low. Tolerance is ±10% and this product is available in various shapes or in resistance boxes. Suitable for motor starters, load measurements, industrial machinery, electric power distribution, instrumentation, and automation control installations, etc. or custom specifications, please contact us to discuss the details. ST TYP 500W TUULR RM, STRTR WR-WOUN RSSTOR M L ST TYP 600W-1000W TUULR RM, STRTR WR-WOUN RSSTOR M L Power imensions (m/m) Weight Resistance Rating L Range ( ) 500W /g W /g W /g OW TO ORR ST 1000W 0.5 Product Type. Rated Power. Resistance Value. ( ) Resistance ST type 500W~1000W ( )ndicates resistance value in =±10% units of ohms. Phone: ax: mail: token@token.com.tw Page 12/14

14 TON MNS QULTY N SRV SL-TYP WR-WOUN POWR RSSTORS SS RSSTOR SRS tubular ceramic form has copper-alloy or chromium-alloy windings as a resistance element, with the resistor mount attachment method the same as the other resistors described. xcept for the sliding contact surface on the windings, the entire component is coated with a high-temperature non-flammable resin. The adjustment mechanism is a rotating point that slides directly on the resistance element, which allows variation of the resistance value (See the specifications of the R series and VR series for exact features). Suitable for education, testing, load simulations, automation control installations, etc. or custom specifications, please contact us to discuss the details. SR TYP 200W -1300W Slide-Type Wave, Variable Wire-Wound Resistor Rating S eramic Rod akelite Range ( ) 200W x x70x W x x90x W x x90x W x x100x W x x100x OW TO ORR SR 500W 10 Product type. Rated power. Resistance value. ( ) Resistance tolerance. SR type 200W~1300W ( ) ndicates resistance value =±10% in units of ohms. SQ TYP 300W -2000W ssembly method. - orizontal mount N- No mounts. Z- Vertical mount. Slide-Type Wave, Variable Wire-Wound Resistor Rating S eramic Rod akelite Range ( ) 300W x x70x W x x90x W x x90x W x x100x W x x100x OW TO ORR SQ 2000W 20 Product type. Rated power. Resistance value. ( ) Resistance tolerance. SQ type 300W~2000W ( ) ndicates resistance =±10% value in units of ohms. ssembly method. - orizontal mount N- No mounts. Z- Vertical mount. Phone: ax: mail: token@token.com.tw Page 13/14

15 TON MNS QULTY N SRV SSMLY-TYP LO RSSTOR OX OX RSSTOR SRS n assembly-type power resistor enclosure contains R series of and/or Q series resistors. The box offers excellent protection and safety, in that it not only provides high power load capability and durability, excellent heat dissipation, and a low temperature coefficient that is directly proportional, but also accommodates a flexible range of assembly options for convenient utilization and installation (Refer to the R series and Q series features for exact specifications). Suitable for educational modeling applications, load testing, industrial machinery, electric power distribution, instruments and automation control installations, etc. or custom specifications, please contact us to discuss the details. R TYP 200W-3200W igh Voltage, ssembly-type Resistance ox Rating S Range ( ) 200W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~1600 QR TYP 300W-4800W igh Voltage, ssembly-type Resistance ox Rating S Range ( ) 300W ~30 600W ~60 600W ~ W ~ W ~ W ~ W ~ W ~ W ~ W ~480 OW TO ORR R 2400W 13.6 Product Type. Rated Power Resistance Value. ( ) Resistance R type 200W~3200W ( ) ndicates resistance value =±5% QR type 300W~4800W in units of ohms. =±10% ssembly Method. -orizontal mount N-No mounts. Z-Vertical mount. Phone: ax: mail: token@token.com.tw Page 14/14