Submittal Transmittal

Transcription

1 Submittal Transmittal Standard St Joseph's Hosp - Fulton ALS 240 W. Thomas Phoenix, AZ Project # 5832A Tel: UNKNOWN Fax: UNKNOWN Kitchell Contractors Inc of AZ Date: 6/18/2013 Reference Number: 0039 To: Rodolfo Arellano Archsol LLC 8901 E Pima Center Parkway Suite #205 Scottsdale, AZ Tel: (480) Fax: (480) From: Lucas Chandler Kitchell Contractors Inc of AZ 1707 E Highland Ave, Suite 200 Phoenix, AZ Tel: (602) Transmitted For Delivered Via Tracking Number Review SharePoint Submittal Package No Qty Description Due Date Package Action PR #2 - Interior Lighting OPEN Items Qty Description Item Action 1 PR #2 - Interior Lighting OPEN Cc: Company Name Contact Name Copies Remarks Please review and return to KCI as soon as possible. Project #: Submittal #: Date: Submittal Name : X Submittal Review 5832A /18/13 PR #2 - Interior Lighting Reviewed Resubmitted as Noted Not in Compliance with Drawings and Specifications These documents have been reviewed and approved for general conformance with the Contract Documents. The approval is not to be construed as direction from the Contractor to the Subcontractor to deviate from the requirements of the Contract Documents. By : Luke Chandler - This submittal includes interior lighting in PR #2 and as requested in review comments in submittal SUBMIT SPECIFIED FIXTURES Rodolfo Arellano_Archsol 01 Jul 13 Signature Signed Date Prolog Manager Printed on: 6/18/2013 KCI Production Standardized Page 1 of 1

2 Transmittal for Electronic Submittals Project Name: St. Joe s Medical ALS Date: 6/5/13 Name and address of Architect: Archsol, LLC 8901 East Pima Center Parkway, Suite 205 Scottsdale, AZ Name of Contractor: Kitchell Name of Firm or Entity that prepared submittal: Jenco, Inc. Name of Subcontractor, manufacturer, and supplier: Arizona Lighting Category and type of submittal: Interior Lighting Fixtures Per PR#2 Submittal purpose and description: For Approval Specification paragraph number or drawing designation and generic name for each of multiple items: Interior Lighting Fixtures Location where product is to be installed: St. Joseph s Hospital ALS Indication of full or partial submittal: Full Transmittal Number: SUB001 Submittal and transmittal distribution record: Uploaded via Sharepoint 4/4/ E. Monte Cristo Avenue Scottsdale, Arizona Tel: Fax:

3 St. Joes Med ALS Jen Project # Submittals Interior Lighting Fixtures 7469 East Monte Cristo Ave Scottsdale, Arizona Phone (480) Fax (480) Jencoinc.com

4 Date: May 23, 2013 Arizona Lighting Sales, Inc W. Alameda Dr., Suite 101 Tempe AZ Phone: (602) Fax: (602) Job Name Bid Date May 15, 2013 Submittal Date May 20, 2013

5

6 Date: May 23, 2013 Page 1/2 Transmittal Arizona Lighting Sales, Inc W. Alameda Dr., Suite 101 Tempe AZ Phone: (602) From: TODD BAUMGARTNER Project Location To HOSPITAL and MEDICAL CENTER- GREGORY JEN ELECTRIC, A.C.C E. MONTE CRISTO AVE. SCOTTSDALE AZ Contact: Dustin Kaelberer ATTACHED WE ARE SENDING YOU 0 COPIES OF THE FOLLOWING ITEMS: Drawings Specifications Other: Prints Information Plans X Submittals THESE ARE TRANSMITTED FOR: Prior Approval Resubmittal for Approval Record Approval Corrections Bids due on: X Approval as Submitted Your Use Other: Approval as Noted Review and Comment Type MFG Part 5/15/13 ADDITIONS (SUBJECT TO APPROVAL) SS234D-20' FOCAL POINT FAVCS-FL-1T5-1C-S-UNV-SM-WH-20' 4' LIGHT BLUE SLEEVE SS234D-20' FOCAL POINT FAVCS-FL-1T5-1C-S-UNV-SM-WH-20' 4' DARK BLUE SLEEVE C2L MISC LEDRA K -FINISH-30 DEGREE LENS C2L MISC LEDRA P D18D BARBICAN ARCHITECTURAL PRO /8"/SM48"/OA/**/NT/**/2X13CFL- UNV Item Note: Standard fabric colors quoted!! D24E BARBICAN ARCHITECTURAL PRO /12"/SM48"/OA/**/NT/**/ 2X26CFL-UNV Item Note: Standard fabric colors quoted!! D30E BARBICAN ARCHITECTURAL PRO /24"/SM48"/OA/**/NT/**/ 2X26CFL-UNV Item Note: Standard fabric colors quoted!! FF W. Alameda Drive, Suite 101, Tempe, Arizona Page 1/2

7 Date: May 23, 2013 Page 2/2 Transmittal Arizona Lighting Sales, Inc W. Alameda Dr., Suite 101 Tempe AZ Phone: (602) From: TODD BAUMGARTNER Type MFG Part TLED-36' TIVOLI, LLC TPL-HO-I-32-36'-24V TPL-INF-C/F?- CHAN-8' TPL-INF-EC TPL-LEAD-I- S4-16' TPL-COUP-S4-12" JTH D TLED-22' TIVOLI, LLC TPL-HO-I-32-24'-24V TPL-INF-C/F?- CHAN-8' TPL-INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D FF W. Alameda Drive, Suite 101, Tempe, Arizona Page 2/2

8 Date: May 23, 2013 HOSPITAL and MEDICAL CENTER- GREGORY 5/15/13 ADDITIONS (SUBJECT TO APPROVAL) Bid Date: May 15, 2013 Submittal Date: May 20, 2013

9

10 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' LIGHT BLUE SLEEVE SS234D-20' avenue c features Extruded aluminum, suspended linear T5/T5HO fluorescent luminaire. 3.5" miniature square profile creates sleek aesthetic. Luminaire may be specified in a direct or indirect configuration. Avenue C makes an exceptional aesthetic statement in conference rooms, private offices, reception areas or other high-end applications. shielding options dimensional data flush lens flush opal satin lens sensor options concave parabolic louver companion luminaire solid (indirect) 3.75" 95.3mm louver daylight/ occupancy sensor wall mount recessed suspended 3.20" 81.3mm solid (indirect) january 2012 G 48" 96" 4' 8' 4' example standard 4' luminaire sensor, indirect only performance Concave Parabolic Louver 1 Lamp T5 58% Efficiency sensor, direct only 4' luminaire 3' lamp 12" note: Sensors may be installed in any module length. Sensor location in run must be specified Sensors are placed on opposite end of power feed. Consult facto for additional placement options Visit focalpointlights.com for complete photometric data

11 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' LIGHT BLUE SLEEVE SS234D-20' fixture: project: ordering suspension information luminaire series 95.5" 48" Avenue C FAVCS 8' start 12' (12' 1 /8") 8' start 20' (20' 1 /8") specifications construction One-piece,.050" thick housing of 6063-T5 extruded aluminum. 20 Ga. ballast channel. 16 Ga. internal bulkhead. 14 Ga. steel end caps. All luminaries are provided with single point aircraft cable suspension mounted on 48" and 96" centers. 4' unit weight: 15 lbs 8' unit weight: 28 lbs 4' end 95.5" 96" 8' start 8' end 16' (16' 1 /8") 95.5" 48" 96" 4' intermediate Consult factory for additional row length information. 8' end 95.5" 96" 96" 8' start 8' intermediate 8' end 24' (24' 1 /8") optic 22 Ga. reflector finished in high reflectance white. Concave parabolic louver: 1"H x 1" frequency fabricated of low iridescent, semi-specular premium grade aluminum. Flush lens: extruded DR acrylic lens.156" thick with opal satin finish. electrical Luminaires are pre wired with factory installed branch circuit wiring and over-molded quick connects. Electronic ballasts are thermally protected and have a Class P" rating. Consult factory for dimming specifications and availability. UL and cul listed. sensors Lutron daylight sensor is a directional sensor that operates with a Lutron EcoSystem (DB) or H-Series (DK) ballast and controls system.the sensor has an integrated IR receiver for EcoSystem programming. Philips Luxsense daylight sensor measures reflected light from the surface below and dims lamp output when the light level exceeds required level. Output may be adjusted by turning the dial. A 0-10V dimming ballast is required (T5 - DS, T5HO - D7 standard). Wattstopper daylight sensor is a closed loop system that measures total light level from daylight and electric light. A 0-10V dimming ballast is required (T5 - DS, T5HO - D7 standard). Wattstopper occupancy sensor is a passive infrared sensor designed for cubicles and small offices. It has built-in daylight sensing that will hold lights off when adequate ambient light exists. One sensor controls multiple fixtures. finish Polyester powder coat applied over a 5-stage pre treatment. shielding Flush Satin Lens Concave Parabolic Louver White Concave Parabolic Louver Indirect with Solid Housing lamping One Lamp T5 One Lamp T5HO circuits Single Circuit FL PL PW SD 1T5 1T5HO 1C voltage 120 Volt Volt Volt 347 ballast Electronic Program Start <10% THD S Electronic Dimming Ballast* D mounting 24" Cable Suspension C24 48" Cable Suspension C48 96" Cable Suspension C96 (Specify one of the following in place of C for J - 2" canopies at non feed locations. CS - for sloped ceilings.) Surface Mount SM factory options Opal Acrylic Dust Cover DC (solid indirect only) Emergency Circuit* EC Emergency Battery Pack* EM HLR/GLR Fuse FU Include 3000K Lamp* L830 Include 3500K Lamp* L835 Include 4100K Lamp* L841 Lutron Daylight Sensor* LY1 (EcoSystem/H-Series ballast & controls required) Lutron Sensor Feed* SF (EcoSystem ballast & controls required) Philips Daylight Sensor* PY1 (0 10V dimming ballast required) WattStopper Daylight Sensor* WY1 (0 10V dimming ballast required) WattStopper Occupancy Sensor* WO1 finish Matte White Housing Titanium Silver WH TS luminaire length 4' Nominal Housing 4' 8' Nominal Housing 8' 12' (8'+4') 12' 16' (8'+8') 16' 20' (8'+4'+8') 20' 24' (8'+8'+8') 24' (Consult factory for additional lengths) integrator options corner FAVCS-90 remotes (specify quantity) WattStopper Daylight Setup Remote* WYSR (required for daylight programming, one included per order) WattStopper Occupant Controller* WOR FAVCS 1C UNV Focal Point LLC 4141 S. Pulaski Rd, Chicago, IL T: F: info@focalpointlights.com Focal Point LLC reserves the right to change specifications for product improvement without notification. 4' LIGHT BLUE SLEEVE * for more information see Reference section. linear 363

12 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' LIGHT BLUE SLEEVE SS234D-20' flush lens avenue c Filename: FAVCSFLT5.IES Catalog #: FAVCS-FL-1T5-1C-120-S-C24-WH-4 Efficiency: 48% Test #: CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) Spacing 1.2 Criterion: Vertical Horizontal Angle Zonal Angle Lumens Total Luminaire CO EFFICIENTS OF UTILIZATION Floor Ceiling Wall RCR % % Zone Lumens Lamp Fixt Vertical Angle Numbers indicate percentage values of reflectivity. Go to for additional photometric data. louver avenue c Filename: FAVCSPL1T5.IES Catalog #: FAVCS-PL-T5-1C-120-S-C24-WH-4 Efficiency: 58% Test #: CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) Spacing 1.5 Criterion: Vertical Horizontal Angle Zonal Angle Lumens Total Luminaire CO EFFICIENTS OF UTILIZATION Floor Ceiling Wall RCR % % Zone Lumens Lamp Fixt Vertical Angle Numbers indicate percentage values of reflectivity. Go to for additional photometric data.

13 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' LIGHT BLUE SLEEVE SS234D-20' solid avenue c Filename: FAVCSSD1T5.IES Catalog #: FAVCS-SD-1T5-1C-120-S-C24-WH-4 Efficiency: 61% Test #: CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) Vertical Horizontal Angle Zonal Angle Lumens Total Luminaire CO EFFICIENTS OF UTILIZATION Floor Ceiling Wall RCR % % Zone Lumens Lamp Fixt Vertical Angle Numbers indicate percentage values of reflectivity. Go to for additional photometric data.

14 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' DARK BLUE SLEEVE SS234D-20' avenue c features Extruded aluminum, suspended linear T5/T5HO fluorescent luminaire. 3.5" miniature square profile creates sleek aesthetic. Luminaire may be specified in a direct or indirect configuration. Avenue C makes an exceptional aesthetic statement in conference rooms, private offices, reception areas or other high-end applications. shielding options dimensional data flush lens flush opal satin lens sensor options concave parabolic louver companion luminaire solid (indirect) 3.75" 95.3mm louver daylight/ occupancy sensor wall mount recessed suspended 3.20" 81.3mm solid (indirect) january 2012 G 48" 96" 4' 8' 4' example standard 4' luminaire sensor, indirect only performance Concave Parabolic Louver 1 Lamp T5 58% Efficiency sensor, direct only 4' luminaire 3' lamp 12" note: Sensors may be installed in any module length. Sensor location in run must be specified Sensors are placed on opposite end of power feed. Consult facto for additional placement options Visit focalpointlights.com for complete photometric data

15 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' DARK BLUE SLEEVE SS234D-20' fixture: project: ordering suspension information luminaire series 95.5" 48" Avenue C FAVCS 8' start 12' (12' 1 /8") 8' start 20' (20' 1 /8") specifications construction One-piece,.050" thick housing of 6063-T5 extruded aluminum. 20 Ga. ballast channel. 16 Ga. internal bulkhead. 14 Ga. steel end caps. All luminaries are provided with single point aircraft cable suspension mounted on 48" and 96" centers. 4' unit weight: 15 lbs 8' unit weight: 28 lbs 4' end 95.5" 96" 8' start 8' end 16' (16' 1 /8") 95.5" 48" 96" 4' intermediate Consult factory for additional row length information. 8' end 95.5" 96" 96" 8' start 8' intermediate 8' end 24' (24' 1 /8") optic 22 Ga. reflector finished in high reflectance white. Concave parabolic louver: 1"H x 1" frequency fabricated of low iridescent, semi-specular premium grade aluminum. Flush lens: extruded DR acrylic lens.156" thick with opal satin finish. electrical Luminaires are pre wired with factory installed branch circuit wiring and over-molded quick connects. Electronic ballasts are thermally protected and have a Class P" rating. Consult factory for dimming specifications and availability. UL and cul listed. sensors Lutron daylight sensor is a directional sensor that operates with a Lutron EcoSystem (DB) or H-Series (DK) ballast and controls system.the sensor has an integrated IR receiver for EcoSystem programming. Philips Luxsense daylight sensor measures reflected light from the surface below and dims lamp output when the light level exceeds required level. Output may be adjusted by turning the dial. A 0-10V dimming ballast is required (T5 - DS, T5HO - D7 standard). Wattstopper daylight sensor is a closed loop system that measures total light level from daylight and electric light. A 0-10V dimming ballast is required (T5 - DS, T5HO - D7 standard). Wattstopper occupancy sensor is a passive infrared sensor designed for cubicles and small offices. It has built-in daylight sensing that will hold lights off when adequate ambient light exists. One sensor controls multiple fixtures. finish Polyester powder coat applied over a 5-stage pre treatment. shielding Flush Satin Lens Concave Parabolic Louver White Concave Parabolic Louver Indirect with Solid Housing lamping One Lamp T5 One Lamp T5HO circuits Single Circuit FL PL PW SD 1T5 1T5HO 1C voltage 120 Volt Volt Volt 347 ballast Electronic Program Start <10% THD S Electronic Dimming Ballast* D mounting 24" Cable Suspension C24 48" Cable Suspension C48 96" Cable Suspension C96 (Specify one of the following in place of C for J - 2" canopies at non feed locations. CS - for sloped ceilings.) Surface Mount SM factory options Opal Acrylic Dust Cover DC (solid indirect only) Emergency Circuit* EC Emergency Battery Pack* EM HLR/GLR Fuse FU Include 3000K Lamp* L830 Include 3500K Lamp* L835 Include 4100K Lamp* L841 Lutron Daylight Sensor* LY1 (EcoSystem/H-Series ballast & controls required) Lutron Sensor Feed* SF (EcoSystem ballast & controls required) Philips Daylight Sensor* PY1 (0 10V dimming ballast required) WattStopper Daylight Sensor* WY1 (0 10V dimming ballast required) WattStopper Occupancy Sensor* WO1 finish Matte White Housing Titanium Silver WH TS luminaire length 4' Nominal Housing 4' 8' Nominal Housing 8' 12' (8'+4') 12' 16' (8'+8') 16' 20' (8'+4'+8') 20' 24' (8'+8'+8') 24' (Consult factory for additional lengths) integrator options corner FAVCS-90 remotes (specify quantity) WattStopper Daylight Setup Remote* WYSR (required for daylight programming, one included per order) WattStopper Occupant Controller* WOR FAVCS 1C UNV Focal Point LLC 4141 S. Pulaski Rd, Chicago, IL T: F: info@focalpointlights.com Focal Point LLC reserves the right to change specifications for product improvement without notification. 4' DARK BLUE SLEEVE * for more information see Reference section. linear 363

16 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' DARK BLUE SLEEVE SS234D-20' flush lens avenue c Filename: FAVCSFLT5.IES Catalog #: FAVCS-FL-1T5-1C-120-S-C24-WH-4 Efficiency: 48% Test #: CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) Spacing 1.2 Criterion: Vertical Horizontal Angle Zonal Angle Lumens Total Luminaire CO EFFICIENTS OF UTILIZATION Floor Ceiling Wall RCR % % Zone Lumens Lamp Fixt Vertical Angle Numbers indicate percentage values of reflectivity. Go to for additional photometric data. louver avenue c Filename: FAVCSPL1T5.IES Catalog #: FAVCS-PL-T5-1C-120-S-C24-WH-4 Efficiency: 58% Test #: CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) Spacing 1.5 Criterion: Vertical Horizontal Angle Zonal Angle Lumens Total Luminaire CO EFFICIENTS OF UTILIZATION Floor Ceiling Wall RCR % % Zone Lumens Lamp Fixt Vertical Angle Numbers indicate percentage values of reflectivity. Go to for additional photometric data.

17 FAVCS-FL-1T5-1C-S-UNV-SM-WH- 20' 4' DARK BLUE SLEEVE SS234D-20' solid avenue c Filename: FAVCSSD1T5.IES Catalog #: FAVCS-SD-1T5-1C-120-S-C24-WH-4 Efficiency: 61% Test #: CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) Vertical Horizontal Angle Zonal Angle Lumens Total Luminaire CO EFFICIENTS OF UTILIZATION Floor Ceiling Wall RCR % % Zone Lumens Lamp Fixt Vertical Angle Numbers indicate percentage values of reflectivity. Go to for additional photometric data.

18 LEDRA K -FINISH-30 DEGREE LENS C2L ADVISE FINISH 30 LENS

19 LEDRA K -FINISH-30 DEGREE LENS C2L

20 LEDRA P C2L

21 LEDRA P C2L

22 /8"/SM48"/OA/**/NT/**/ 2X13CFL-UNV Standard fabric colors quoted!! D18D 1&'. v EJgNHEL #4$+%#0 4%*+6'%674#. 41&7%65 6&T EL[ +4%7.#4 47/ ABOVE: 18 Circular Drum with custom printed photo, Burlap fabric trim, compact fluorescent, aircraft cable mount and opal lens ABOVE: 18 Circular Drum with custom fabric, Black fabric trim, compact fluorescent, stem mount and opal lens SHOWN: 18 Circular Drum in Henna fabric, Garnet fabric trim, LED, stem mount and opal lens 16 ':#%6.; 9*#6 ;17 #4'.11-+0) (14`.'#5' %106#% * ;174 %7561/ 4'37+4'/'065T '$U 999T$#4$+%#0T%# /#+.U +0(1u$#4$+%#0T%# '.'2*10'U EgLNNgJJGgIKLE #:U MNIgMMEgMKNL

23 /8"/SM48"/OA/**/NT/**/ 2X13CFL-UNV Standard fabric colors quoted!! D18D ADVISE SHADE ADVISE FINISH UNV

24 /12"/SM48"/OA/**/NT/**/ 2X26CFL-UNV Standard fabric colors quoted!! D24E SHOWN: 24 Circular Drum in Oatmeal fabric, Royal fabric trim, compact fluorescent, aircraft cable mount and opal lens LEFT: 24 Circular Drums in Orange Pop fabric, compact fluorescent, aircraft cable mount and opal lens

25 /12"/SM48"/OA/**/NT/**/ 2X26CFL-UNV Standard fabric colors quoted!! D24E ADVISE SHADE ADVISE FINISH UNV

26 /24"/SM48"/OA/**/NT/**/ 2X26CFL-UNV Standard fabric colors quoted!! D30E SHOWN: 24 Circular Drum in Oatmeal fabric, Royal fabric trim, compact fluorescent, aircraft cable mount and opal lens LEFT: 24 Circular Drums in Orange Pop fabric, compact fluorescent, aircraft cable mount and opal lens

27 /24"/SM48"/OA/**/NT/**/ 2X26CFL-UNV Standard fabric colors quoted!! D30E 24" ADVISE SHADE ADVISE FINISH UNV

28 TPL-HO-I-32-36'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-36' CAT: TYPE: PROJECT: FEET: TIVOTAPE INDOOR HIGH OUTPUT High output static LED tape light strip emits sharp, pure color for unique effects in cove and architectural applications. FEATURES Flexib " 3 4" SPECIFICATIONS TIVOTAPE INDOOR STATIC HIGH OUTPUT EFFICACY LM/WT CRI LM/FT WT/FT Items in bold denote Title 24 High efficacy rating. Measurements are based on 24V DC power design calculations will vary based on power supply and run lengths. LED DATA WATTAGE LED LIFE* / COLOR TEMP VIEWING ANGLE Spacing LEDs Mounting Installation Field Trimmable Connectors Power Supply Listing Compliance Warranty 30,000 hrs. LED * LEDs operate at 90% of LED manufacturers maximum current spec rating. PROFILES 5/16" 3 /16" 3/8" TIVOTAPE STATIC HO TAPE LIGHT ORDER SPECIFICATION GUIDE Example: TPL-HO-I PRODUCT CODE TPL Tivotape INTENSITY HO HO = High Output INSTALL I I = Indoor LED COLOR 65 = Cool White (6500 K +/-500 K) 41 = Cool White (4100 K +/-150 K) 32 = Warm White (3200 K +/-100 K) 29 = Warm White (2900 K +/-100 K) LENGTH 36' 1 = 1 foot* * Sold in 11 5 /8" sections VOLTAGE = 24V DC REQUIRED POWER SUPPLY PSU See power supply specsheets REQUIRED POWER SUPPLY OPTIONS ADUL D ADUL D JT D JT D JTH D QT D QTH D QT D QTH D MT D See power supply specifications for more information OPTIONAL DIMMERS N-600 N-1000 NH-600 NH-1000 DIM-12V-8A DIM-OT-1-5-D Copyright 2012 Tivoli Page 1 of Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

29 TPL-HO-I-32-36'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-36' TIVOTAPE INDOOR HIGH OUTPUT MOUNTING ACCESSORIES TPL-I-TUBE-BASE-8 Architectural Tube Mounting Channel can be used with the Architectural Tube or mounted directly to Tivotape. Available Clear or Frosted in 8' standard lengths. 5 8" 5 16" TPL-I-STRIP-1 Mounting strip Available in 11¼" standard lengths. Tivotape mounts to the mounting strip to provide a flat rigid mount inside the Architectural tube or on it s own. Also recommended when mounting onto metal surfaces. TPL-O-TUBE-C/F-8 Architectural Tube Clear or Frosted in 8' standard lengths, one piece Tivotape architectural tube is recommended for applications that require straight orientation of LED s while adding protection. Can be mounted to TPL-TUBE- BASE-8 channel or directly to surface via double sided tape. TPL-O-TUBE-EC Architectural Tube End Cap TPL-INF-C/F-CHAN-8 Infinity Channel Clear or Frosted in 8' standard lengths, two piece Infinity mounting channel is recommended for uneven mounting surfaces or applications that require very straight and uniform orientation of LED s while adding protection from physical access. Infinity mounting channel allows a wide beam spread from the mounting surface while maintaining a small over-all foot print. TPL-INF-EC Infinity Channel End Cap 3 /4" " " 5 5 8" 5 5 8" 5 1 /2" TPL-AL-CHAN-6 AL Series channel Aluminum channel available in field cuttable 6' standard lengths. 1 TPL-AL-MC Mounting Clip Mounting clip can be mounted at 0 or 20 on any flat surface. Screws by others TPL-AL-LENS-6 AL Series lens - 30 spread Available in field cuttable 6 lengths TPL-AL-EC AL Series end caps One pair (one dead-end, one with lead wire opening) includes attachment screws 1 WIRING ACCESSORIES Ceiling Mount Wall Mount TPL-COUP-S4-06/12 Coupler 4 conductor coupler available in 6" or 12" lengths. Connects two Tivotape High Output tapelights with a 6" or 12" gap between tapelight strips. TPL-LEAD-I-S4-01/16 Lead Wire 4 conductor lead wire available in 1' or 16' standard lengths. Features 24 gauge wire on input end and 4 pin High Output connection on other end. TPL-T-CONN-S4 T-Connector (4-pin SUB) Connect up to three Tivotape High Output tape lights (parallel wired) at angles. TPL-Y-CONN-S4 Y-Connector (4-pin SUB) Connect two Tivotape High Output tape lights (parallel wired) at 45 angles from input connection. Page 2 of 4 - Copyright 2012 Tivoli Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

30 TPL-HO-I-32-36'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-36' TIVOTAPE INDOOR HIGH OUTPUT CAT.NO COLOR VIEWING ANGLE WAVELENGTH (COLOR TEMP) WATTS PER STRIP (FOOT) LUMENS PER STRIP (FOOT) LUMENS PER WATT LEDS PER STRIP MAX LEDS PER 4AMP CIRCUIT MAX LEDS PER CONTINUOUS RUN* TPL-HO-I Cool White 6500 K k 4.25W (22 ft.) 342 (19 ft.) TPL-HO-I Cool White 4100 K k 4.25W (22 ft.) 342 (19 ft.) TPL-HO-I Warm White 3200 K k 4.25W (22 ft.) 342 (19 ft.) TPL-HO-I Warm White 2900 K k 4.25W (22 ft.) 342 (19 ft.) * Based on 3.5A continuous run PROFILE High Output 24VDC White TivoTape 4 1 /16" 3 7 /8" 3 1 /4" 11 3 /16" 11 3 /4" LED BINNING Copyright 2012 Tivoli Page 3 of Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

31 TPL-HO-I-32-36'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-36' TIVOTAPE INDOOR HIGH OUTPUT RECOMMENDED POWER SUPPLIES PART # PRIMARY TOTAL WATTAGE / AND AMPERAGE PER BREAKER SECONDARY LISTING DIMENSIONS WEIGHT ELECTRONIC OR AC MAGNETIC DIMMABLE (Y OR N) UL DIMMERS SELECTOR DIMMER TYPE CONTROL SIGNAL INPUT VOLTAGE OUTPUT VOLTAGE MAX LOAD BREAKER RATING DIMENSIONS A B C D E F * ** PRODUCT SPECIFICATION GUIDE LIGHT MAX. LEDS PER MAX CONTINUOUS SOURCE 4 AMP CIRCUIT RUN LENGTH MTBF Mean Time Between Failures (MTBF) for LEDs: Copyright 2012 Tivoli Page 4 of Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

32 TPL-HO-I-32-24'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-22' CAT: TYPE: PROJECT: FEET: TIVOTAPE INDOOR HIGH OUTPUT High output static LED tape light strip emits sharp, pure color for unique effects in cove and architectural applications. FEATURES Flexib " 3 4" SPECIFICATIONS TIVOTAPE INDOOR STATIC HIGH OUTPUT EFFICACY LM/WT CRI LM/FT WT/FT Items in bold denote Title 24 High efficacy rating. Measurements are based on 24V DC power design calculations will vary based on power supply and run lengths. LED DATA WATTAGE LED LIFE* / COLOR TEMP VIEWING ANGLE Spacing LEDs Mounting Installation Field Trimmable Connectors Power Supply Listing Compliance Warranty 30,000 hrs. LED * LEDs operate at 90% of LED manufacturers maximum current spec rating. PROFILES 5/16" 3 /16" 3/8" TIVOTAPE STATIC HO TAPE LIGHT ORDER SPECIFICATION GUIDE Example: TPL-HO-I PRODUCT CODE TPL Tivotape INTENSITY HO HO = High Output INSTALL I I = Indoor LED COLOR 65 = Cool White (6500 K +/-500 K) 41 = Cool White (4100 K +/-150 K) 32 = Warm White (3200 K +/-100 K) 29 = Warm White (2900 K +/-100 K) LENGTH 24' 1 = 1 foot* * Sold in 11 5 /8" sections VOLTAGE = 24V DC REQUIRED POWER SUPPLY PSU See power supply specsheets REQUIRED POWER SUPPLY OPTIONS ADUL D ADUL D JT D JT D JTH D QT D QTH D QT D QTH D MT D See power supply specifications for more information OPTIONAL DIMMERS N-600 N-1000 NH-600 NH-1000 DIM-12V-8A DIM-OT-1-5-D Copyright 2012 Tivoli Page 1 of Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

33 TPL-HO-I-32-24'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-22' TIVOTAPE INDOOR HIGH OUTPUT MOUNTING ACCESSORIES TPL-I-TUBE-BASE-8 Architectural Tube Mounting Channel can be used with the Architectural Tube or mounted directly to Tivotape. Available Clear or Frosted in 8' standard lengths. 5 8" 5 16" TPL-I-STRIP-1 Mounting strip Available in 11¼" standard lengths. Tivotape mounts to the mounting strip to provide a flat rigid mount inside the Architectural tube or on it s own. Also recommended when mounting onto metal surfaces. TPL-O-TUBE-C/F-8 Architectural Tube Clear or Frosted in 8' standard lengths, one piece Tivotape architectural tube is recommended for applications that require straight orientation of LED s while adding protection. Can be mounted to TPL-TUBE- BASE-8 channel or directly to surface via double sided tape. TPL-O-TUBE-EC Architectural Tube End Cap TPL-INF-C/F-CHAN-8 Infinity Channel Clear or Frosted in 8' standard lengths, two piece Infinity mounting channel is recommended for uneven mounting surfaces or applications that require very straight and uniform orientation of LED s while adding protection from physical access. Infinity mounting channel allows a wide beam spread from the mounting surface while maintaining a small over-all foot print. TPL-INF-EC Infinity Channel End Cap 3 /4" " " 5 5 8" 5 5 8" 5 1 /2" TPL-AL-CHAN-6 AL Series channel Aluminum channel available in field cuttable 6' standard lengths. 1 TPL-AL-MC Mounting Clip Mounting clip can be mounted at 0 or 20 on any flat surface. Screws by others TPL-AL-LENS-6 AL Series lens - 30 spread Available in field cuttable 6 lengths TPL-AL-EC AL Series end caps One pair (one dead-end, one with lead wire opening) includes attachment screws 1 WIRING ACCESSORIES Ceiling Mount Wall Mount TPL-COUP-S4-06/12 Coupler 4 conductor coupler available in 6" or 12" lengths. Connects two Tivotape High Output tapelights with a 6" or 12" gap between tapelight strips. TPL-LEAD-I-S4-01/16 Lead Wire 4 conductor lead wire available in 1' or 16' standard lengths. Features 24 gauge wire on input end and 4 pin High Output connection on other end. TPL-T-CONN-S4 T-Connector (4-pin SUB) Connect up to three Tivotape High Output tape lights (parallel wired) at angles. TPL-Y-CONN-S4 Y-Connector (4-pin SUB) Connect two Tivotape High Output tape lights (parallel wired) at 45 angles from input connection. Page 2 of 4 - Copyright 2012 Tivoli Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

34 TPL-HO-I-32-24'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-22' TIVOTAPE INDOOR HIGH OUTPUT CAT.NO COLOR VIEWING ANGLE WAVELENGTH (COLOR TEMP) WATTS PER STRIP (FOOT) LUMENS PER STRIP (FOOT) LUMENS PER WATT LEDS PER STRIP MAX LEDS PER 4AMP CIRCUIT MAX LEDS PER CONTINUOUS RUN* TPL-HO-I Cool White 6500 K k 4.25W (22 ft.) 342 (19 ft.) TPL-HO-I Cool White 4100 K k 4.25W (22 ft.) 342 (19 ft.) TPL-HO-I Warm White 3200 K k 4.25W (22 ft.) 342 (19 ft.) TPL-HO-I Warm White 2900 K k 4.25W (22 ft.) 342 (19 ft.) * Based on 3.5A continuous run PROFILE High Output 24VDC White TivoTape 4 1 /16" 3 7 /8" 3 1 /4" 11 3 /16" 11 3 /4" LED BINNING Copyright 2012 Tivoli Page 3 of Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com

35 TPL-HO-I-32-24'-24V TPL-INF-C/F?-CHAN-8' TPL- INF-EC TPL-LEAD-I-S4-16' TPL-COUP-S4-12" JTH D TLED-22' TIVOTAPE INDOOR HIGH OUTPUT RECOMMENDED POWER SUPPLIES PART # PRIMARY TOTAL WATTAGE / AND AMPERAGE PER BREAKER SECONDARY LISTING DIMENSIONS WEIGHT ELECTRONIC OR AC MAGNETIC DIMMABLE (Y OR N) UL DIMMERS SELECTOR DIMMER TYPE CONTROL SIGNAL INPUT VOLTAGE OUTPUT VOLTAGE MAX LOAD BREAKER RATING DIMENSIONS A B C D E F * ** PRODUCT SPECIFICATION GUIDE LIGHT MAX. LEDS PER MAX CONTINUOUS SOURCE 4 AMP CIRCUIT RUN LENGTH MTBF Mean Time Between Failures (MTBF) for LEDs: Copyright 2012 Tivoli Page 4 of Mosher Ave Tustin, CA 927 ph www.tivolilighting.com / sales@tivolilighting.com