for YOU and YOUR customer by SAMICK . (499) CATALOG NO. 1601E

Transcription

1 . (499) for YOU and YOUR customer by SAMICK CATALOG NO. 161E

2 . (499) The copyright of the contents of this publication is obtained by SAMICK Precision Ind. Co., Ltd. Every care has been taken to ensure the contents and all data has been checked for their accuracy, but no liability can be accepted to us for any incorrect or incomplete data. We reserve the right to modify the contents inside. And because of continuous improvement and development, contents can be assumed to us. Published by SAMICK Precision Ind. Co., Ltd. (P.C 42721) 39 Seongseogongdannam-ro 32-gil, Dalseo-gu, Daegu, Korea (South) Telephone Fax Web site publication No. 161E

3 . (499) Brief page Product Overview Technical Information Self-Aligning Linear Bushing SAMICK Linear Bushing Asian Standard Linear Bushing European Standard Linear Bushing Aluminum Case Unit SUS SERIES Asian Standard Linear Bushing(LM-SUS) SUS SERIES European Standard Linear Bushing (LME-SUS) SUS SERIES Aluminum Case Unit(SC, SCE-SUS) LM Shaft & Support Rail Unit Reference

4 . (499) Contents page Product Overview Part Number Notation Self-Aligning Linear Bushing Linear Bushing Aluminum Case Unit Support Rail Unit LM Shaft LM Shaft Support Structure and Feature Technical Information 19 Self Aligning Linear Bushing (LMES, LMBS) Technical Information European Standard Self Aligning Linear Bushing (LMES, LMES_OP) US Standard Self Aligning Linear Bushing (LMBS, LMBS_OP) Compact Linear Bushing (CLB)

5 . (499) Contents page SAMICK Linear Bushing Technical Information Asian Standard Linear Bushing(LM) Asian Standard (LM, LM_L, AJ, OP) Flanged Type (LMF(L), LMK(L), LMH(L)) Pilot Flanged Type (LMFP(L), LMKP(L), LMHP(L)) Middle Flanged Type (LMFM, LMKM, LMHM) European Standard Linear Bushing (LME) European Standard (LME, LME_L, AJ, OP) Flanged Type (LMEF(L), LMEK(L)) Pilot Flanged Type (LMEFP(L), LMEKP(L)) Middle Flanged Type (LMEFM, LMEKM) Aluminum Case Unit(SC, SCE) Asian Standard (SC, SCW, SCV, SCJ) Asian Standard Open Type (TBR, SBR) European Standard (SCE, SCEW, SCEV) SUS SERIES Asian Standard Linear Bushing (LM-SUS) SUSSERIES European Standard Linear Bushing (LME-SUS) SUS SERIES Aluminum Case Unit (SC, SCE-SUS) LM Shaft & Support Rail Unit Shaft Rail Unit(SBS, TBS) LM Shaft Support(SK) LM Shaft (SF) Reference

6 . (499)

7 . (499) Overall Linear Bushing technology by SAMICK 7 Look at the technology here, and feel the Instinct of Linear Art at the field. Product Overview

8 . (499) Self-Aligning Linear ushing Compact Linear Bushing compact series 8 Product Overview Standard Linear Bushing sleeves,stainless steel ball LM, LM_OP, LM_AJ, LM_L LME, LME_OP, LME_AJ, LME_L Flanged type Linear Bushing sleeves, stainless steel ball

9 . (499) Pilot Flanged type Linear Bushing the PilotFlange can get more stable movement and being the most suitable for moment load sleeves, stainless steel ball Middle Pilot Flanged type Linear Bushing the Pilot Flange can get more stable movement and being the most suitable for moment load on both sides of the moving body sleeves, stainless steel ball Aluminum Case Unit Aligning linear bushing 9 Product Overview Aluminum Case Unit (Open Type) bushing

10 . (499) SUS SERIES-Linear Bushing products Can be selected resin retainer (standard), and steel retainer (for high 1 Product Overview SUS SERIES-Flanged Linear Bushing resistance products With a variety of design and ease of installation Bushing Can be selected resin retainer (standard), and steel retainer (for high SUS SERIES-Pilot Flanged Linear Bushing resistance products With Variety of design and ease of installation When the load of moving body passed directly to the Linear Bushing, the Pilot Flange can get more stable movement and being the most suitable for moment load Can be selected resin retainer (standard), and steel retainer (for high SUS SERIES-Middle Pilot Flanged type Linear Bushing resistance products can get more stable movement for moment load

11 . (499) Support Rail Unit LM Shaft / Shaft Support High carbon bearing steel shaft (surface treatment and chamfering is possible) Aluminum shaft support 11 Product Overview

12 . (499) PART NUMBER NOTATION Self-aligning Linear Bushing LM ES 16 UU OP - N S 12 Part Number Notation Standard Selection(Europe, US) ES Metric series BS Nominal Shaft Diameter Seal Metric Blank No Seal UU Both Side Seal U One Side Seal Sloting Type Blank Standard type OP Open type(for support rail) Corrosion resistance type Blank N Electroless nickel plating M Stainless steel C Chrome plating Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

13 . (499) PART NUMBER NOTATION LINEAR BUSHING LM E F P 2 L UU OP - A N S Standard Option(Europe, US) Blank Asian Standard E European Standard Flange Option Blank Standard F Circular type K Square type H Oval type Flange Location Blank Standard P Pilot M Middle Nominal Shaft Diameter Standard Flange Length Blank Standard L Long Seal Blank No Seal UU Both Side Seal U One Side Seal Sloting Type Blank Standard type OP Open type(for support rail) AJ Adjustable type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer (High temperature) Outer-sleeves (by corrosion resistance) Blank Resin retainer(standard) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 13 Part Number Notation

14 . (499) PART NUMBER NOTATION Aluminum Case Unit SC E J 2 W N UU - A N S ith Standard Linear Bushing) Standards Blank Asian Standard E European Standard Clearance adjustable type Blank Standard J Clearance adjustable type (Asian Nominal Shaft Diameter Metric 14 Part Number Notation Case unit length Blank Standard V Compact type W Long type Sea Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) Outer-sleeves (by corrosion resistance) Blank Resin retainer(standard) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball Clearance adjustable type aluminum housing unit applies only to the Asian standard and the Nominal Shaft Diameter

15 . (499) PART NUMBER NOTATION Aluminum Case Unit (Open type) SBR 2 UU - N S SBR Open type Aluminum Case Unit (Standard type) TBR Open type Aluminum Case unit (Clearance adjustable type) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Outer-sleeves (by corrosion resistance) Blank Resin retainer(standard) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball (Standard) S Stainless steel ball 15 Part Number Notation linear bushing. Please contact Samick.

16 . (499) PART NUMBER NOTATION Support Rail Unit SBS C g6 3-1 L 16 Part Number Notation LM Shaft SBS Support Rail Unit for SBR TBS Support Rail Unit for TBR Shaft (by corrosion resistance) Blank No plating (Standard) C Chrome plated shaft N Nickel plated shaft R Raydent treated shaft Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter Shaft Length SF C g6 3-1 L Samick LM Shaft Shaft (by corrosion resistance) Blank No plating (Standard) C Chrome plated shaft N Nickel plated shaft R Raydent treated shaft Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter LM Shaft Support SK 2 Shaft Length Shaft Diameter

17 . (499) Structure and Special Features Self-Aligning Linear Bushing part Material Special features and function 1 Retainer - POM 2 Ball 3 Ball plate 4 Rubber Seal 5 Outer Sleeve - POM - High carbon bearing steel - Stainless steel - Ceramic - High carbon bearing steel - Stainless steel available Corrosion resistance plating - NBR Linear Bushing - An essential element of unlimited linear stroke high speed stroke - a key part of the self-aligning linear bushing to perform self-aligning - Blocking a foreign substance from outside - Support ball plate 17 Structure & Feature part Material Special features and function 1 Retainer 2 Ball 3 Outer Sleeve 4 Rubber Seal - POM - Stainless Steel - High carbon bearing steel - Stainless steel - Ceramic - High carbon bearing steel - Stainless steel resistance plating - NBR - An essential element of unlimited linear stroke high speed stroke - Direct contact part to housing - An essential element for high load capacity - Blocking a foreign substance from outside

18 . (499)

19 . (499) Overall Linear Bushing technology by SAMICK 19 Look at the technology here, and feel the Instinct of Linear Art at the field. Technical Information

20 . (499) Load Rating and Service Life of Linear Motion System service conditions of a linear motion system, the load can be assessed by calculating the nominal life, based on the basic dynamic load rating, and you need to check if the values thus obtained meet your requirements. Basic static load rating 2 Load & Service Life Basic Static Load Rating (C) a certain limit, it hinders the smooth motion of the linear motion system. The basic static load rating refers to a static rating values of individual linear motion systems, see th Static Safety Factor (fs) A linear motion system may possibly receive an unp safety factor against operating loads. The static safety factor(fs) indicates the ratio of a linear motion system load selecting the correct type of a linear motion system for your application, be sure that the type you are considering he standard values for the static safety factors. fs = C P fs = M M fs Static safety factor C Basic static load rating (N) M P Calculated load (N) M To calcula moment is applied by overhanging loads. When selecting the correct type of a linear motion system for your

21 . (499) Fig 1. Static Safety Factor(fs) Machine used Loading conditions fs lower limit Ordinary Industrial Machine Machine tool Receives no vibration or impact Receives vibration or impact Receives no vibration or impact Receives vibration or impact For large radial loads fh TC S P C Basic static load rating (N) P Calculated load (N) fh Hardness factor ft Hardness factor fc Temperature factor Basic Dynamic Load Rating(C) The basic dynamic load ) if they use rollers. The basic dynamic another in response to a load. For rating values of individual linear motion systems, see the respective spe tables in this catalog. Nominal Life The service lives of linear motion systems more or less vary from system to system even if they are manufactured to the same specifications and remain in service under the same operating conditions. Hence a guideline for of a linear motion system can be obtained from the basic dynamic load rating (C)and load imposed (P) using the 21 Load & Service Life For linear motion system with balls For a linear motion system with rollers C L = ( ) P C L = ( ) P C L = ( ) P C = ( ) L L C C P Applied load L

22 . (499) L = ( L = ( fh ft fc f fh ft fc f C ) P C ) P L L C C P Applied load fh ft C Contact factor (see Table) fw Load factor (see Table) Once nominal life L is obtained using this equation, the Linear Bushing service life can be calculated using Lh = 6 s N L h Travel life in hours s Stroke N Number of strokes per minute 22 Load & Service Life Factors that affect the travel life Hardness factor(fh) To ensure achievement of the optimum load rating the basic dynamic and static loadratings decrease. The ratings must therefore be multiplied by therespective hardness factors (fh). Hardness factor(fh) RC) Fig1 Hardness factor(fh) Temperature factor (ft) Fig2 Temperature factor(ft) Temperature factor(ft) For Linear Bushings used at ambient corresponding tothe ambient temperature, selected from the diagram, must be taken into consideration. plates, and retainer must be changed for high

23 . (499) Contact factor(fc) When multiple Linear Bushings are used laid over one another, moments and mounting-surface precision Fig 2. Contact factor(fc) Number of linear bushings on a shaft Contact factor(fc)(fc) Over 6 In normal use 1. Load factor(fw) 23 Load & Service Life Fig 3. Load factor(fw) Load conditions Operating conditions Speed Load factor (fw) No impact and vibration Sight impact and vibration considerable impact and vibration

24 . (499) Load Consideration acting on your system and determine the product best for your needs. Horizontal Application Horizontal Application 24 Load & Service Life Side Mounted Application Vertical Application At the time of start and stop, the load varies because of inertia Technical termsd d W = Weight(N) FNXNYNZ

25 . (499) Mean Effective Load at Varying Load effective load. For stepped load according to the travelling distance Pm = ( P + P + Pn n L P m Pn L Total traveling distance Ln For almost linearly varying load Pm ( P min P m Pmin P 25 Load & Service Life For loads that changes monotonously When the load draws a sine curve Pm Pm For loads that changes sinusoid ally

26 . (499)

27 . (499) Would you align, please? 27 No, I don t need! I am Self-Aligning! Self-Aligning Linear Bushing(LMES, LMBS)

28 . (499) Self-Aligning Linear Bushing High Capacity Self-Aligning Linear Bushing - SUPERBALL Higher Load Ratings and Travel Life Specially designed ball plate is made of Hardened steel, and the precisely ground groove is slightly larger Linear Bushing. Self-Alignment This Self Alignment capability eliminates any possibility of edge pressure caused by inaccurate machining, motion. 28 Self- Aligning Smooth and Silent Running resistance. Due to them, the smooth and silent running can be obtained.. Clearance Adjustment Interchangeability Ball Plate Fig3. Cross-section of SUPERBALL Fig4. SUPERBALL's self-alignment feature

29 . (499) Self-Aligning Linear Bushing Cost Effectiveness Lower cost on installation Self-Alignment feature can compensate the inaccurate machining of the base, so less installation time and cost can be obtained. Higher load rating and longer travel life F F Reduction of material cost and reducing material cost. STANDARD SUPER BALL Energy saving Load Ratings and Travel Life 29 Self- Aligning hardness of the shaft. Orientation of Balls No. of Ball Row Max. Load Equation Min. Load Equation F = C F = C F = C

30 . (499) Self-Aligning Linear Bushing Basic Dynamic load rating(c) and travel life The travel life of a Linear Bushing is determined largely by the quality of the shaft. The Basic Dynamic equation. L ) L ) C C P Applied load f fh ft fc Load factor Hardness factor Temperature factor Contact factor 3 Self- Aligning From the above equations, the stroke and frequency are constant, the Travel Life can be calculated by Lh s N Travel life(hour) Stroke Number of strokes per minute(cpm) Examples of Calculation and Choosing a proper SUPERBALL <Working conditions> - Applied load S) - Number of strokes per minutes ) - Shaft Hardness HRH - Operating speed Operating Speed V s N Other factors (fc, ft

31 . (499) Self-Aligning Linear Bushing Calculation of expected travel life Choosing proper Linear Bushing Basic dynamic load rating. 31 Self- Aligning Housing Housing and Shaft occurred at both ends of outer- sleeves in case of LMES type Part number() LMES1 LMES12 LMES16 LMES2 LMES25 LMES3 LMES4 LMES5 Inner diameter() Tolerance(H7) Part number(inch) Inner diameter(inch) Tolerance(H7) LMBS4 LMBS6 LMBS8 LMBS1 LMBS12 LMBS16 LMBS2 LMBS24 LMBS32

32 . (499) Self-Aligning Linear Bushing LM Shaft 1) Hardness travel life and permissible load. 2) Surface Finishing 3) Tolerance Part number () LMES1 LMES12 LMES16 LMES2 LMES25 LMES3 LMES4 LMES5 32 Self- Aligning Diameter () Tolerance (h6) Part number LMBS4 LMBS6 LMBS8 LMBS1 LMBS12 LMBS16 LMBS2 LMBS24 LMBS32 (inch) Diameter (inch) Tolerance (g6)

33 . (499) Self-Aligning Linear Bushing PART NUMBER NOTATION Self-aligning Linear Bushing LM ES 16 UU OP - N S Standard Selection(Europe, US) ES Metric series BS Nominal Shaft Diameter Metric Seal Blank No Seal UU Both Side Seal U One Side Seal Sloting Type Blank Standard type OP Open type(for support rail) Corrosion resistance type Blank N Electroless nickel plating C Chrome plating M Stainless steel 33 LMES Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

34 . (499) Self-Aligning Linear Bushing LMES Self-Aligning Linear Bushing Drawing 34 LMES Part Number Notation LMES 2 UU - N S Self-aligning Linear Bushing(Europeanstandard) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Corrosion resistance type Blank N Electroless nickel plating C Chrome plating Stainless steel M Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

35 . (499) Self-Aligning Linear Bushing LMES Self-Aligning Linear Bushing PART NUMBER dr. WORKING dr. D L L1 L2 BORE DIAMETER CLEARA ±.2 ±.2 min BASIC LOAD RATING(N) DYNAMIC (C) STATIC (Co) NO. OF BALL CIRCUIT WEIGHT (gf) LMES1UU LMES12UU LMES16UU LMES2UU 6 LMES25UU 6 LMES3UU 6 LMES4UU 6 LMES5UU 6 35 LMES, C on the table need to be

36 . (499) Self-Aligning Linear Bushing LMES_OP Self-Aligning Linear Bushing Drawing 36 LMES- OP Part Number Notation LMES 2 UU OP - N S Self-aligning Linear Bushing(Europeanstandard) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Open type Linear Bushing Corrosion resistance type Blank No-plaiting(Standard) N Electroless nickel plating C Chrome plating Stainless steel M Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

37 . (499) Self-Aligning Linear Bushing LMES_OP Self-Aligning Linear Bushing PART NUMBER LMES12UU OP dr. WORKING dr. D 1 L L1 L2 BORE DIAMETER CLEARA ±.2 ±.2 min h F G J BASIC LOAD RATING(N) DYNAMIC (C) 2 STATIC (Co) NO. OF WEIGHT BALL (gf) CIRCUIT 66 - LMES16UU OP - LMES2UU OP - LMES25UU OP LMES3UU OP LMES4UU OP LMES5UU OP 37 LMES- OP, C on the table need to be

38 . (499) Self-Aligning Linear Bushing LMBS Self-Aligning Linear Bushing Drawing 38 LMBS Part Number Notation LMBS 2 UU - N S Self-aligning Linear Bushing(inch type) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Corrosion resistance type Blank No-plaiting(Standard) N Electroless nickel plating C Chrome plating Stainless steel M Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

39 . (499) Self-Aligning Linear Bushing LMBS Self-Aligning Linear Bushing PART NUMBER dr. (inch) WORKING dr. BORE DIAMETER CLEARANR D 1 L L1 inch min DYNAMIC (C) 2 L2 BASIC LOAD RATING(N) STATIC (Co) NO. OF WEIGHT BALL (gf) CIRCUIT LMBS4UU LMBS6UU 66 LMBS8UU LMBS1UU LMBS12UU 6 LMBS16UU 6 LMBS2UU 6 LMBS24UU 6 LMBS32UU 6 39 LMBS, C on the table need to be bf bf

40 . (499) Self-Aligning Linear Bushing LMBS_OP Self-Aligning Linear Bushing Drawing 4 LMBS- OP Part Number Notation LMBS 2 UU OP - N S Self-aligning Linear Bushing(inch type)) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Open type Corrosion resistance type Blank N Electroless nickel plating C Chrome plating Stainless steel M Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

41 . (499) LMBS_OP Self-Aligning Linear Bushing PART NUMBER BORE dr. DIAMETER (inch) CLEARANR inch L L1 F G J WORKING dr. D 1 L2 min h BASIC LOAD RATING(N) DYNAMIC (C) 2 STATIC (Co) NO. OF WEIGHT BALL (gf) CIRCUIT LMBS8UU OP Thru LMBS1UU OP LMBS12UU OP LMBS16UU OP LMBS2UU OP LMBS24UU OP LMBS32UU OP Thru 41 LMBS- OP, C on the table need to be bf bf

42 . (499) Self-Aligning Linear Bushing CLB Compact Linear Bushing Drawing 42 CLB Part Number Notation CLB 2 UU - N S Compact Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU oth Side Seal U One Side Seal Corrosion resistance type Blank No-plaiting(Standard) N Electroless nickel plating C Chrome plating Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball

43 . (499) Self-Aligning Linear Bushing CLB Compact Linear Bushing Shaft Diameter d Without Seal Part Number With Seal No. OF BALL CIRCUIT DIMENSION D 1 L ±.2 WORKINGBORE DIAMETER dr CLEARAN CE() BASIC LOAD RATING(N) 2 DYNAMIC (C) STATIC (Co) WEIGHT (gf) 8 CLB8 CLB8UU 1 CLB1 CLB1UU 12 CLB12 CLB12UU 14 CLB14 CLB14UU 16 CLB16 CLB16UU 2 CLB2 CLB2UU 6 25 CLB25 CLB25UU 6 3 CLB3 CLB3UU 6 4 CLB4 CLB4UU 43 CLB 5 CLB5 CLB5UU, C on the table need to be

44 . (499)

45 . (499) Wonna be supported? Hey, You ve got SAMICK Support! SAMICK Linear Bushing

46 . (499) Linear Bushing SAMICK LINEAR BUSHING high-carbon Chromium Bearing Steel, and inner and outer grinding processes are applied after Heat treatment. Interchangeability Rigid Outer Sleeve the needle bearing on outer surface. 46 Linear Bushing High precision Retainer moving direction and smooth motion. LM Case Unit LM Case Unit, SC type is consist of the light Aluminum case and LM type Linear Bushing, so the assembly Linear Bushing against the direction of load. Application Auto-Gas cutters, printing machines, card selectors, food packing machines, and etc. Structure part Material 1 Retainer 2 Ball 3 Outersleeve - POM - Stainless Steel - High carbon bearing seel - Stainless steel - Ceramic - High carbon bearing steel Corrosion resistance plating available 4 Seal - NBR (Acrylonitrile Butadiene Rubber) optional item

47 . (499) Linear Bushing Part Number Notation Linear Bushing LM E F P 2 L UU OP - A N S Standard Option(Europe, US) Blank Asian Standard E European Standard Flange Option Blank Standard F Circular type K Square type H Oval type Flange Location Blank Standard P Pilot M Middle Nominal Shaft Diameter Standard Flange Length Blank Standard L Long Seal Blank No Seal UU Both Side Seal U One Side Seal Sloting Type Blank Standard type OP Open type(for support rail) AJ Adjustable type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 47 Linear Bushing Outer-sleeves (by corrosion resistance) Blank Resin retainer(standard) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

48 . (499) Linear Bushing Load rating and Travel Life Load ratings and Orientation of Balls Orientation of Balls No. of Ball Row 4 Row 5 Row 6 Row Max. Load Equation F = C F = C F = C Min. Load 48 Load & Travel Life Equation F = 1.41 C F = 1.46 C F = 1.26 C Basic Dynamic load rating(c) and travel life The travel life of a Linear Bushing is determined largely by the quality of the shaft. The Basic Dynamic equation. L ) L ) C C P Applied load f fh ft fc Load factor Hardness factor Temperature factor Contact factor

49 . (499) Linear Bushing Contact use of Linear Bushing and Travel life PU Equivalent radial load (N) (load by moment load) K M )) From the above equation, the stroke and frequency are constant, the Travel Life can be calculated by Lh s N Travel life (hr) Stroke () Number of strokes per minute (cpm) LM 5 LM 5L LME 5 LM 6 LM 6L LME 8 49 Load & Travel Life LM 8S LM 8L LME 12 LM 8 LM 1L LME 16 LM 1 LM 12L LME 2 LM 12 LM 13L LME 25 LM 13 LM 16L LME 3 LM 16 LM 2L LME 4 LM 2 LM 25L LME 5 LM 25 LM 3L LME 6 LM 3 LM 35L LM 35 LM 4L LM 4 LM 5L LM 5 LM 6L LM 6

50 . (499) Linear Bushing Short stroke Applications Fig 5. Short stroke correction factor(kc) the shaft is shorter than that of the Linear Bushing. load rating must be multiplied by the shot stroke correction factor (KC) found on Fig right side. Short stroke correction factor(kc) stroke Linear bushing length Lubrication and Friction 5 Lubrication & Friction lubrication. Grease Lubrication Before applying the grease, the anticorrosive oil must be removed by kerosene or organic solvent, and applying the grease after drying. Must Applying grease directly on the ball for both side sealed type (UU), Oil Lubrication Operating Temperature Fig 6 Viscosity There is no need to remove anticorrosive used according to the temperature. The turbine oil, machine oil, and spindle oil are usually used as lubrication oil. Drop the oil on the shaft for lubrication, or supply it through an oil hole provided on lubrication is not used in both seal type because the seal remove oil, because.

51 . (499) Linear Bushing Linear Bushing has balls as rolling elements, so it gives rise to reduces the frictional resistance. Static F Friction resistance force fs P Oil lubrication Grease lubrication No lubrication 51 Lubrication & Friction P C

52 . (499) Linear Bushing Installation Guide Tolerance of Housing bore Table 7. The bore clearance of Housing Type Case Part number Grade LM Higher(H) LME - K6, J6 LM _ L LMFM - 52 Mounting & Installation Clearance of Outer sleeve and Shaft Table 8. Outer diameter tolerance of shaft Type LM Shaft Part number Grade LM Higher(H) f6, g6 h6 LME - K6 LM _ L LMFM - f6, g6 h6 Radial Clearance Dr. Type 6

53 . (499) Linear Bushing Mounting recoended.. Standard type retaining rings and cover plates. Fig 8. Mounting with retaining rings Fig 9. Mounting with cover plates Retaining ring for Mounting Table 9. Retaining ring dimension Retaining ring() Part number C type Needle type C type Needle type LM 6 - LM - LM 53 Mounting & Installation

54 . (499) Linear Bushing Setscrew mounting prohibited sleeve and should be avoided. Fig 1. Mounting with setscrew Housing Flanged type of mounting because of its single body shape. Geometric Dimensional Tolerance should be considered 54 Mounting & Installation Fig 11. Flanged type mounting

55 . (499) Linear Bushing Mounting of Adjustable type side of Housing for equivalent deformation against radial direction.. Fig 12. Mounting of adjustable type Mounting of Housing. Mounting datum plane 55 Mounting & Installation Fig 13. Fig 14.

56 . (499) Linear Bushing LM shaft and rail installation for smooth movement. collimator or other optical instruments. be changed. 56 Mounting & Installation Fig 15. Fig 16. Fig 17. Fig 18.

57 . (499) Linear Bushing Mounting of open type applied for normal using, but heavy pre-load should be avoided. Fig 19. Mounting of Open type Variation of static load ratings according to installation of Linear Bushing open type Orientation of Balls No. of Ball Rows 3 row 4 row 5 row F F F Max. Load Equation Min. Load F = C F = C F = C 57 Mounting & Installation Equation F 1 F =.17 C F F =.45 C F F =.72 C Mounting of Shaft Support tightening bolt. Fig 2. Mounting of Shaft support Tightening Bolt Mounting Bolt Datum plane

58 . (499) Linear Bushing Mounting of LM Aluminum Case Unit Mounting of SC type Both side mounting of SC(E), SC(E)_W, SC(E)_V type from the top and the bottom side with mounting bolt are both available, and it gives you minimum mounting time. Fig 21. Mounting of Case Unit Application Tips Mounting of Linear Bushing For mounting of standard type SAMICK Linear Bushing into the Housing, a jig should be used to avoid direct hitting on the outer sleeve or seal when installing. See below. 58 Mounting & Installation Insertion of Shaft Fig 22. Mounting into housing Care must be taken to align the bushing and the shaft when inserting a shaft into a linear bushing. If the shaft is inserted with slanted, balls may depart from the damaged or deformed retainer. Fig 23. Insertion of shaft into Linear Bushing

59 . (499) Linear Bushing When Moment loads applied External loads should be distributed uniformly on a Linear Bushing. When moment loads are applied, two or more Linear Bushings should be used on one LM shaft, and the distance between two Linear Bushings should have enough distance. When the moment loads are applied, calculate the equivalent load and choose the proper Linear Bushing. Mounting of open type Linear Bushing with three ball rows Please mount the open type Linear Bushings with three ball circuit as same as Figure for considering of load distribution. Load Fig 24. Installation example of LM12, LM13 The Rotational Motion Prohibited Linear Bushing is not suitable for rotational motion, If the Linear Bushing is exposed to rotational motion it may lead unexpected accidents. 59 Mounting & Installation Fig 25. The Rotational Motion Prohibited

60 . (499)

61 . (499) ASIAN STANDARD LINEAR BUSHING(LM)

62 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM CLOSED LINEAR BUSHING Drawing 62 LM Part Number Notation LM 2 UU - A N S SAMICK Linear Bushing Nominal Shaft Diameter Seal Blank UU U Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank N R Ball type (material) Blank S No Seal Both Side Seal One Side Seal Standard(SUJ2) Electroless nickel plating Raydent treatment High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LM6 to LM25 only (LM8S applicable with resin retainer only)

63 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM CLOSED LINEAR BUSHING PART NUMBER Resin Steel 5 dr. WORKING BORE DIAMETER CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM5UU LM6UU LM6-A LM8SUU LM8UU LM8-A LM1UU LM1-A LM12UU LM12-A LM13UU LM13-A LM16UU LM16-A LM2UU LM2-A LM25UU LM25-A LM LM3UU LM35UU LM4UU LM5UU LM6UU LM8UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12 = 41N 1 basic dynamic load rating(c 1) of LM12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from LM6 to LM25 only (LM8S resin retainer only)

64 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM_L LONG LINEAR BUSHING Drawing 64 LM-L Part Number Notation LM 2 L UU - A N S SAMICK Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S No Seal Both Side Seal One Side Seal High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LM6L to LM25L only (LM8SL applicable with resin retainer only)

65 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM_L LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM6LUU LM6L-A LM8LUU LM8L-A LM1LUU LM1L-A LM12LUU LM12L-A LM13LUU LM13L-A LM16LUU LM16L-A LM2LUU LM2L-A LM25LUU LM25L-A LM3LUU LM-L LM35LUU LM4LUU LM5LUU LM6LUU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12L = 65N 1 basic dynamic load rating(c 1) LM12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

66 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM_AJ ADJUSTABLE LINEAR BUSHING Drawing 66 LM-AJ Part Number Notation LM 2 UU AJ - A N S SAMICK Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Linear Bushing Adjustable type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LM6AJ to LM25AJ only

67 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM_AJ ADJUSTABLE LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR W h D 1 BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM6UU AJ LM6 AJ-A LM8SUU AJ LM8UU AJ LM8 AJ-A LM1UU AJ LM1 AJ-A LM12UU AJ LM12 AJ-A LM13UU AJ LM13 AJ-A LM16UU AJ LM16 AJ-A LM2UU AJ LM2 AJ-A LM25UU AJ LM25 AJ-A LM3UU AJ LM-AJ LM35UU AJ LM4UU AJ LM5UU AJ LM6UU AJ Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12AJ = 41N 1 basic dynamic load rating(c1) of LM12AJ = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

68 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM_OP OPEN LINEAR BUSHING Drawing 68 LM-OP Part Number Notation LM 2 UU OP - N S SAMICK Linear Bushing Nominal Shaft Diameter Seal UU Both Side Seal 1 Linear Bushing Open type Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

69 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LM_OP OPEN LINEAR BUSHING PART NUMBER Resin WORKING BORE DIAMETER dr. CLEAR D 4 L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM12UU OP LM13UU OP LM16UU OP LM2UU OP LM25UU OP LM3UU OP LM35UU OP LM4UU OP LM5UU OP LM-OP LM6UU OP Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12OP = 41N 1 basic dynamic load rating(c1) of LM12OP = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

70 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMF FLANGED LINEAR BUSHING Drawing 7 LMF Part Number Notation LMF 2 UU - A N S SAMICK Circular Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S No Seal Both Side Seal One Side Seal High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMF6 to LMF25 only (LMF8S applicable with resin retainer only)

71 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMF FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMF6UU LMF6-A LMF8SUU LMF8UU LMF8-A LMF1UU LMF1-A LMF12UU LMF12-A LMF13UU LMF13-A LMF16UU LMF16-A LMF2UU LMF2-A LMF25UU LMF25-A LMF3UU LMF LMF35UU LMF4UU LMF5UU LMF6UU LMF8UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMF12 = 41N 1 basic dynamic load rating(c1) of LMF12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

72 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMF_L FLANGED LONG LINEAR BUSHING Drawing 72 LMF-L Part Number Notation LMF 2 L UU - A N S SAMICK Circular Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMF6L to LMF25L only

73 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMF_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMF6LUU LMF6L-A LMF8LUU LMF8L-A LMF1LUU LMF1L-A LMF12LUU LMF12L-A LMF13LUU LMF13L-A LMF16LUU LMF16L-A LMF2LUU LMF2L-A LMF25LUU LMF25L-A LMF3LUU LMF-L LMF35LUU LMF4LUU LMF5LUU LMF6LUU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMF12L = 65N 1 basic dynamic load rating(c 1) of LMF12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

74 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMK FLANGED LINEAR BUSHING Drawing 74 LMK Part Number Notation LMK 2 UU - A N S SAMICK Square Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMK6 to LMK25 only (LMK8S applicable with resin retainer only)

75 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMK FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMK6UU LMK6-A LMK8SUU LMK8UU LMK8-A LMK1UU LMK1-A LMK12UU LMK12-A LMK13UU LMK13-A LMK16UU LMK16-A LMK2UU LMK2-A LMK25UU LMK25-A LMK3UU LMK LMK35UU LMK4UU LMK5UU LMK6UU LMK8UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMK12 = 41N 1 basic dynamic load rating(c1) of LMK12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

76 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMK_L FLANGED LONG LINEAR BUSHING Drawing 76 LMK-L Part Number Notation LMK 2 L UU - A N S SAMICK Square Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMK6L to LMK25L only

77 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMK_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMK6LUU LMK6L-A LMK8LUU LMK8L-A LMK1LUU LMK1L-A LMK12LUU LMK12L-A LMK13LUU LMK13L-A LMK16LUU LMK16L-A LMK2LUU LMK2L-A LMK25LUU LMK25L-A LMK3LUU LMK-L LMK35LUU LMK4LUU LMK5LUU LMK6LUU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMK12L = 65N 1 basic dynamic load rating(c1) of LMK12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

78 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMH FLANGED LINEAR BUSHING Drawing 78 LMH Part Number Notation LMH 2 UU - A N S SAMICK Oval Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMH6 to LMH25 only

79 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMH FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMH6UU LMH6-A LMH8UU LMH8-A LMH1UU LMH1-A LMH12UU LMH12-A LMH13UU LMH13-A LMH16UU LMH16-A LMH2UU LMH2-A LMH25UU LMH25-A LMH3UU LMH 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMH12 = 41N 1 basic dynamic load rating(c1) of LMH12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

80 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMH_L FLANGED LONG LINEAR BUSHING Drawing 8 LMH-L Part Number Notation LMH 2 L UU - A N S SAMICK Oval Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMH6L to LMH25L only

81 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMH_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMH6LUU LMH6L-A LMH8LUU LMH8L-A LMH1LUU LMH1L-A LMH12LUU LMH12L-A LMH13LUU LMH13L-A LMH16LUU LMH16L-A LMH2LUU LMH2L-A LMH25LUU LMH25L-A LMH3LUU LMH-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMH12L = 65N 1 basic dynamic load rating(c1) of LMH12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

82 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMFP FLANGED LINEAR BUSHING Drawing 82 LMFP Part Number Notation LMFP 2 UU - A N S SAMICK Circular Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMFP6 to LMFP25 only

83 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMFP FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMFP6UU LMFP6-A LMFP8UU LMFP8-A LMFP1UU LMFP1-A LMFP12UU LMFP12-A LMFP13UU LMFP13-A LMFP16UU LMFP16-A LMFP2UU LMFP2-A LMFP25UU LMFP25-A LMFP3UU LMFP LMFP35UU LMFP4UU LMFP5UU LMFP6UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMFP12 = 41N 1 basic dynamic load rating(c1) of LMFP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

84 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMFP_L FLANGED LONG LINEAR BUSHING Drawing 84 LMFP-L Part Number Notation LMFP 2 L UU - A N S SAMICK Circular Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMFP6L to LMFP25L only

85 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMFP_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMFP6LUU LMFP6L-A LMFP8LUU LMFP8L-A LMFP1LUU LMFP1L-A LMFP12LUU LMFP12L-A LMFP13LUU LMFP13L-A LMFP16LUU LMFP16L-A LMFP2LUU LMFP2L-A LMFP25LUU LMFP25L-A LMFP3LUU LMFP-L LMFP35LUU LMFP4LUU LMFP5LUU LMFP6LUU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMFP12L = 65N 1 basic dynamic load rating(c1) of LMFP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 41N.12kgf

86 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMKP FLANGED LINEAR BUSHING Drawing 86 LMKP Part Number Notation LMKP 2 UU - A N S SAMICK Square Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMKP6 to LMKP25 only

87 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMKP FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMKP6UU LMKP6-A LMKP8UU LMKP8-A LMKP1UU LMKP1-A LMKP12UU LMKP12-A LMKP13UU LMKP13-A LMKP16UU LMKP16-A LMKP2UU LMKP2-A LMKP25UU LMKP25-A LMKP3UU LMKP LMKP35UU LMKP4UU LMKP5UU LMKP6UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMKP12 = 41N 1 basic dynamic load rating(c1) of LMKP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

88 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMKP_L FLANGED LONG LINEAR BUSHING Drawing 88 LMKP-L Part Number Notation LMKP 2 L UU - A N S SAMICK Square Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMKP6L to LMKP25L only

89 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMKP_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMKP6LUU LMKP6L-A LMKP8LUU LMKP8L-A LMKP1LUU LMKP1L-A LMKP12LUU LMKP12L-A LMKP13LUU LMKP13L-A LMKP16LUU LMKP16L-A LMKP2LUU LMKP2L-A LMKP25LUU LMKP25L-A LMKP3LUU LMKP-L LMKP35LUU LMKP4LUU LMKP5LUU LMKP6LUU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMKP12L = 65N 1 basic dynamic load rating(c1) of LMKP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 41N.12kgf

90 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMHP FLANGED LINEAR BUSHING Drawing 9 LMHP Part Number Notation LMHP 2 UU - A N S SAMICK Oval Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMHP6 to LMHP25 only

91 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMHP FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMHP6UU LMHP6-A LMHP8UU LMHP8-A LMHP1UU LMHP1-A LMHP12UU LMHP12-A LMHP13UU LMHP13-A LMHP16UU LMHP16-A LMHP2UU LMHP2-A LMHP25UU LMHP25-A LMHP3UU LMHP 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMHP12 = 41N 1 basic dynamic load rating(c1) of LMHP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

92 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMHP_L FLANGED LONG LINEAR BUSHING Drawing 92 LMHP-L Part Number Notation LMHP 2 L UU - A N S SAMICK Oval Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMHP6L to LMHP25L only

93 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMHP_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMHP6LUU LMHP6L-A LMHP8LUU LMHP8L-A LMHP1LUU LMHP1L-A LMHP12LUU LMHP12L-A LMHP13LUU LMHP13L-A LMHP16LUU LMHP16L-A LMHP2LUU LMHP2L-A LMHP25LUU LMHP25L-A LMHP3LUU LMHP-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMHP12L = 65N 1 basic dynamic load rating(c1) of LMHP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 41N.12kgf

94 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMFM FLANGED LONG LINEAR BUSHING Drawing 94 LMFM Part Number Notation LMFM 2 UU - A N S SAMICK Circular Middle Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMFM6 to LMFM25 only

95 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMFM FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMFM6UU LMFM6-A LMFM8UU LMFM8-A LMFM1UU LMFM1-A LMFM12UU LMFM12-A LMFM13UU LMFM13-A LMFM16UU LMFM16-A LMFM2UU LMFM2-A LMFM25UU LMFM25-A LMFM3UU LMFM LMFM35UU LMFM4UU LMFM5UU LMFM6UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMFM12 = 65N 1 basic dynamic load rating(c1) of LMFM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 41N.12kgf

96 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMKM FLANGED LONG LINEAR BUSHING Drawing 96 LMKM Part Number Notation LMKM 2 UU - A N S SAMICK Square Middle Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMKM6 to LMKM25 only

97 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMKM FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMKM6UU LMKM6-A LMKM8UU LMKM8-A LMKM1UU LMKM1-A LMKM12UU LMKM12-A LMKM13UU LMKM13-A LMKM16UU LMKM16-A LMKM2UU LMKM2-A LMKM25UU LMKM25-A LMKM3UU LMKM LMKM35UU LMKM4UU LMKM5UU LMKM6UU Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMKM12 = 65N 1 basic dynamic load rating(c1) of LMKM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 41N.12kgf

98 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMHM FLANGED LONG LINEAR BUSHING Drawing 98 LMHM Part Number Notation LMHM 2 UU - A N S SAMICK Oval Middle Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMHM6 to LMHM25 only

99 . (499) ASIAN STANDARD LINEAR BUSHING(LM) LMHM FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMHM6UU LMHM6-A LMHM8UU LMHM8-A LMHM1UU LMHM1-A LMHM12UU LMHM12-A LMHM13UU LMHM13-A LMHM16UU LMHM16-A LMHM2UU LMHM2-A LMHM25UU LMHM25-A LMHM3UU LMHM 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMHM12 = 65N 1 basic dynamic load rating(c1) of LMHM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

100 . (499)

101 . (499) EUROPEAN STANDARD LINEARBUSHING(LME)

102 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME CLOSED LINEAR BUSHING Drawing 12 LME Part Number Notation LME 2 UU - A N S European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LME8 to LME25 only

103 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME CLOSED LINEAR BUSHING Resin PART NUMBER Steel dr. WORKING BORE DIAMETER CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME5UU LME8UU LME8-A LME12UU LME12-A LME16UU LME16-A LME2UU LME2-A LME25UU LME25-A LME3UU LME4UU LME5UU LME6UU LME 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12 = 41N 1 basic dynamic load rating(c1) of LME12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

104 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME_L LONG LINEAR BUSHING Drawing 14 LME-L Part Number Notation LME 2 L UU - A N S European Standard Samick Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LME8L to LME25L only

105 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME_L LONG LINEAR BUSHING Resin PART NUMBER Steel dr. WORKING BORE DIAMETER CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME8LUU LME8L-A LME12LUU LME12L-A LME16LUU LME16L-A LME2LUU LME2L-A LME25LUU LME25L-A LME3LUU LME4LUU LME5LUU LME6LUU LME-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12L = 65N 1 basic dynamic load rating(c1) of LME12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

106 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME_AJ ADJUSTABLE LINEAR BUSHING Drawing 16 LME-AJ Part Number Notation LME 2 UU AJ - A N S European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Linear Bushing Adjustable type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LME8AJ to LME25AJ only

107 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME_AJ ADJUSTABLE LINEAR BUSHING Resin PART NUMBER Steel dr. WORKING BORE DIAMETER CLEAR D 4 L B CLEAR CLEAR CLEAR W D 1 h BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME5UUAJ LME8UUAJ LME8AJ-A LME12UUAJ LME12AJ-A LME16UUAJ LME16AJ-A LME2UUAJ LME2AJ-A LME25UUAJ LME25AJ-A LME3UUAJ LME4UUAJ LME5UUAJ LME6UUAJ LME-AJ 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12AJ = 41N 1 basic dynamic load rating(c1) of LME12AJ = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

108 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME_OP OPEN LINEAR BUSHING Drawing 18 LME-OP Part Number Notation LME 2 UU OP - N S European Standard Samick Linear Bushing Nominal Shaft Diameter Seal UU Both Side Seal 1 Linear Bushing Open type Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

109 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LME_OP OPEN LINEAR BUSHING PART NUMBER Resin dr. WORKING BORE DIAMETER CLEAR D 4 L B CLEAR CLEAR CLEAR W D 1 h BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF WEIGHT BALL (gf) 2 ROW LME12UUOP LME16UUOP LME2UUOP LME25UUOP LME3UUOP LME4UUOP LME5UUOP LME6UUOP LME-OP 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12OP = 41N 1 basic dynamic load rating(c1) of LME12OP = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

110 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEF FLANGED LINEAR BUSHING Drawing 11 LMEF Part Number Notation LMEF 2 UU - A N S European Standard Samick Circular Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMEF8 to LMEF25 only

111 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEF FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEF8UU LMEF8-A LMEF12UU LMEF12-A LMEF16UU LMEF16-A LMEF2UU LMEF2-A LMEF25UU LMEF25-A LMEF3UU LMEF4UU LMEF5UU LMEF6UU LMEF 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEF12 = 41N 1 basic dynamic load rating(c1) of LMEF12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

112 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEF_L FLANGED LONG LINEAR BUSHING Drawing 112 LMEF-L Part Number Notation LMEF 2 L UU - A N S European Standard Samick Circular Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEF8L to LMEF25L only

113 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEF_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEF8LUU LMEF8L-A LMEF12LUU LMEF12L-A LMEF16LUU LMEF16L-A LMEF2LUU LMEF2L-A LMEF25LUU LMEF25L-A LMEF3LUU LMEF4LUU LMEF5LUU LMEF6LUU LMEF-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEF12L = 65N 1 basic dynamic load rating(c1) of LMEF12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

114 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEK FLANGED LINEAR BUSHING Drawing 114 LMEK Part Number Notation LMEK 2 UU - A N S European Standard Samick Square Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEK8 to LMEK25 only

115 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEK FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEK8UU LMEK8-A LMEK12UU LMEK12-A LMEK16UU LMEK16-A LMEK2UU LMEK2-A LMEK25UU LMEK25-A LMEK3UU LMEK4UU LMEK5UU LMEK6UU LMEK 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEK12 = 41N 1 basic dynamic load rating(c1) of LMEK12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

116 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEK_L FLANGED LONG LINEAR BUSHING Drawing 116 LMEK-L Part Number Notation LMEK 2 L UU - A N S European Standard Samick Square Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from LMEK8L to LMEK25L only

117 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEK_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEK8LUU LMEK8L-A LMEK12LUU LMEK12L-A LMEK16LUU LMEK16L-A LMEK2LUU LMEK2L-A LMEK25LUU LMEK25L-A LMEK3LUU LMEK4LUU LMEK5LUU LMEK6LUU LMEK-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEK12 = 65N 1 basic dynamic load rating(c1) of LMEK12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

118 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEFP FLANGED LINEAR BUSHING Drawing 118 LMEFP Part Number Notation LMEFP 2 UU - A N S European Standard Samick Circular Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEFP8 to LMEFP25 only

119 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEFP FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 ) STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEFP8UU LMEFP8-A LMEFP12UU LMEFP12-A LMEFP16UU LMEFP16-A LMEFP2UU LMEFP2-A LMEFP25UU LMEFP25-A LMEFP3UU LMEFP4UU LMEFP5UU LMEFP6UU LMEFP 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEFP12 = 41N 1 basic dynamic load rating(c1) of LMEFP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

120 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEFP_L FLANGED LONG LINEAR BUSHING Drawing 12 LMEFP-L Part Number Notation LMEFP 2 L UU - A N S European Standard Samick Circular Pilot Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEFP8L to LMEFP25L only

121 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEFP_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEFP8LUU LMEFP8L-A LMEFP12LUU LMEFP12L-A LMEFP16LUU LMEFP16L-A LMEFP2LUU LMEFP2L-A LMEFP25LUU LMEFP25L-A LMEFP3LUU LMEFP4LUU LMEFP5LUU LMEFP6LUU LMEFP-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEFP12L = 65N 1 basic dynamic load rating(c1) of LMEFP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

122 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEKP FLANGED LINEAR BUSHING Drawing 122 LMEKP Part Number Notation LMEKP 2 UU - A N S European Standard Samick Squared Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEKP8 to LMEFP25 only

123 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEKP FLANGED LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEKP8UU LMEKP8-A LMEKP12UU LMEKP12-A LMEKP16UU LMEKP16-A LMEKP2UU LMEKP2-A LMEKP25UU LMEKP25-A LMEKP3UU LMEKP4UU LMEKP5UU LMEKP6UU LMEKP 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEKP12 = 41N 1 basic dynamic load rating(c1) of LMEKP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

124 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEKP_L FLANGED LONG LINEAR BUSHING Drawing 124 LMEKP-L Part Number Notation LMEKP 2 L UU - A N S European Standard Samick Square Pilot Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEKP8L to LMEKP25L only

125 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEKP_L FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEKP8LUU LMEKP8L-A LMEKP12LUU LMEKP12L-A LMEKP16LUU LMEKP16L-A LMEKP2LUU LMEKP2L-A LMEKP25LUU LMEKP25L-A LMEKP3LUU LMEKP4LUU LMEKP5LUU LMEKP6LUU LMEKP-L 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEKP12L = 65N 1 basic dynamic load rating(c1) of LMEKP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

126 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEFM FLANGED LONG LINEAR BUSHING Drawing 126 LMEFM Part Number Notation LMEFM 2 UU - A N S European Standard Samick Circular Middle Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEFM8 to LMEFM25 only

127 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEFM FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEFM8UU LMEFM8-A LMEFM12UU LMEFM12-A LMEFM16UU LMEFM16-A LMEFM2UU LMEFM2-A LMEFM25UU LMEFM25-A LMEFM3UU LMEFM4UU LMEFM5UU LMEFM6UU LMEFM 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEFM12 = 65N 1 basic dynamic load rating(c1) of LMEFM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

128 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEKM FLANGED LONG LINEAR BUSHING Drawing 128 LMEKM Part Number Notation LMEKM 2 UU - A N S European Standard Samick Square Middle Flanged Linear Bushing Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from LMEKM8 to LMEKM25 only

129 . (499) EUROPEAN STANDARD LINEAR BUSHING(LME) LMEKM FLANGED LONG LINEAR BUSHING Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) DYNAMIC (C) 1 ) STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEKM8UU LMEKM8-A LMEKM12UU LMEKM12-A LMEKM16UU LMEKM16-A LMEKM2UU LMEKM2-A LMEKM25UU LMEKM25-A LMEKM3UU LMEKM4UU LMEKM5UU LMEKM6UU LMEKM 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEKM12 = 65N 1 basic dynamic load rating(c1) of LMEKM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

130 . (499)

131 . (499) ALUMINUM CASE UNIT(SC, SCE)

132 . (499) ALUMINUM CASE UNIT(SC, SCE) SC ALUMINUM CASE UNIT Drawing 132 SC Part Number Notation SC 2 UU N - A N S Aluminum Case Unit Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal New type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from SC8 to SC25 only

133 . (499) ALUMINUM CASE UNIT(SC, SCE) SC ALUMINUM CASE UNIT PART NUMBER L/B h D W H G A J E S 1 S 2 K L BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8UU-B LM8UU M SC1UU-B LM1UU M SC12UU-B LM12UU M SC12UUN-B LM12UU M SC13UU-B LM13UU M SC16UU-B LM16UU M SC2UU-B LM2UU M SC25UU-B LM25UU M SC3UU-B LM3UU M SC SC35UU-B LM35UU M SC4UU-B LM4UU M SC5UU-B LM5UU M Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12 = 41N 1 basic dynamic load rating(c1) of SC12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8 to SC25 only

134 . (499) ALUMINUM CASE UNIT(SC, SCE) SCW ALUMINUM CASE UNIT LONG Drawing Grease nipple 134 SCW Part Number Notation SC 2 W UU - A N S Aluminum Case Unit Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from SC8W to SC25W only

135 . (499) ALUMINUM CASE UNIT(SC, SCE) SCW ALUMINUM CASE UNIT LONG PART NUMBER L/B h D W H G A J E S 1 S 2 K W L W BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8WUU-B LM8U M SC1WUU-B LM1U M SC12WUU-B LM12U M SC13WUU-B LM13U M SC16WUU-B LM16U M SC2WUU-B LM2U M SC25WUU-B LM25U M SC3WUU-B LM3U M SC35WUU-B LM35U M SCW SC4WUU-B LM4U M SC5WUU-B LM5U M Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12W = 65N 1 basic dynamic load rating(c1) of SC12W = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8W to SC25W only

136 . (499) ALUMINUM CASE UNIT(SC, SCE) SCW_N ALUMINUM CASE UNIT LONG Drawing Grease nipple 136 SCW-N Part Number Notation SC 2 W UU N - A N S Aluminum Case Unit Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal New type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from SC8WN to SC25WN only

137 . (499) ALUMINUM CASE UNIT(SC, SCE) SCW_N ALUMINUM CASE UNIT LONG PART NUMBER L/B h D W H G A J E S 1 S 2 K W L W BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8WUUN-B LM8U M SC1WUUN-B LM1U M SC12WUUN-B LM12U M SC13WUUN-B LM13U M SC16WUUN-B LM16U M SC2WUUN-B LM2U M SC25WUUN-B LM25U M SC3WUUN-B LM3U M SC35WUUN-B LM35U M SCW-N SC4WUUN-B LM4U M SC5WUUN-B LM5U M Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12WN = 65N 1 basic dynamic load rating(c1) of SC12WN = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8WN to SC25WN only

138 . (499) ALUMINUM CASE UNIT(SC, SCE) SCV ALUMINUM CASE UNIT Drawing 138 SCV Part Number Notation SC 2 V UU N - A N S Aluminum Case Unit Nominal Shaft Diameter Compact type Seal Blank No Seal UU Both Side Seal U One Side Seal New type Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 Steel retainer applicable from SC8V to SC25V only

139 . (499) ALUMINUM CASE UNIT(SC, SCE) SCV ALUMINUM CASE UNIT PART NUMBER L/B h D W H G A J E S 1 S 2 L V BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8VUU-B LM8UU M SC1VUU-B LM1UU M SC12VUU-B LM12UU M SC12VUUN-B LM12UU M SC13VUU-B LM13UU M SC16VUU-B LM16UU M SC2VUU-B LM2UU M SC25VUU-B LM25UU M SC3VUU-B LM3UU M SCV SC35VUU-B LM35UU M SC4VUU-B LM4UU M SC5VUU-B LM5UU M Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12V = 41N 1 basic dynamic load rating(c1) of SC12V = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8V to SC25V only

140 . (499) ALUMINUM CASE UNIT(SC, SCE) SCJ ADJUSTABLE ALUMINUM CASE UNIT Drawing 14 SCJ Part Number Notation SCJ 2 UU - A N S Aluminum Case Unit(Adjustable type) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steelball(standard) S Stainless steel ball 1 Steel retainer applicable from SCJ1 to SCJ25 only

141 . (499) ALUMINUM CASE UNIT(SC, SCE) SCJ ADJUSTABLE ALUMINUM CASE UNIT PART NUMBER L/B h D W H G A J E S 1 K L M BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) OUTER DIAME TER WEIGHT (gf) 2 SCJ1UU LM1UUAJ M M SCJ12UU LM12UUAJ M M SCJ13UU LM13UUAJ M M SCJ16UU LM16UUAJ M M SCJ2UU LM2UUAJ M M SCJ25UU LM25UUAJ M M SCJ3UU LM3UUAJ M M SCJ35UU LM35UUAJ M M SCJ4UU LM4UUAJ M M SCJ SCJ5UU LM5UUAJ M M Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12 = 41N 1 basic dynamic load rating(c1) of SC12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCJ1 to SCJ25 only

142 . (499) ALUMINUM CASE UNIT(SC, SCE) SBR ALUMINUM CASE UNIT OPEN Drawing 142 SBR Part Number Notation SBR 2 UU - N S Aluminum Case Unit(Open type) Nominal Shaft Diameter Seal UU Both Side Seal 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank S High carbon bearing steel ball(standard) Stainless steel ball 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

143 . (499) ALUMINUM CASE UNIT(SC, SCE) SBR ALUMINUM CASE UNIT OPEN PART NUMBER L/B D W G A M S 1 h 1 E J K BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SBR16UU LM16UUOP M SBR2UU LM2UUOP M SBR25UU LM25UUOP M SBR3UU LM3UUOP M SBR35UU LM35UUOP M SBR4UU LM4UUOP M SBR5UU LM5UUOP M SBR 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SBR16 = 77N 1 basic dynamic load rating(c1) of SBR16 = 77/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

144 . (499) ALUMINUM CASE UNIT(SC, SCE) TBR ALUMINUM CASE UNIT OPEN Drawing 144 TBR Part Number Notation TBR 2 UU - N S Aluminum Case Unit(Open type) Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Outer-sleeves (by corrosion resistance) Blank N R Standard(SUJ2) Electroless nickel plating Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball

145 . (499) ALUMINUM CASE UNIT(SC, SCE) TBR ALUMINUM CASE UNIT OPEN PART NUMBER L/B D W G A M S 1 h 1 E J K BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 TBR16UU LM16UUOP M TBR2UU LM2UUOP M TBR25UU LM25UUOP M TBR3UU LM3UUOP M TBR 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of TBR16UU = 392N 1 basic dynamic load rating(c1) of TBR16UU = 392/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

146 . (499) ALUMINUM CASE UNIT(SC, SCE) SCE ALUMINUM CASE UNIT Drawing 146 SCE Part Number Notation SCE 2 UU - A N S European Standard Aluminum Case Unit Nominal Shaft Diameter Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from SCE8 to SCE25 only

147 . (499) ALUMINUM CASE UNIT(SC, SCE) SCE ALUMINUM CASE UNIT PART NUMBER L/B h D W H G A J E S 1 S 2 K L BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SCE8UU-B LME8UU M SCE12UU-B LME12UU M SCE16UU-B LME16UU M SCE2UU-B LME2UU M SCE25UU-B LME25UU M SCE3UU-B LME3UU M SCE4UU-B LME4UU M SCE5UU-B LME5UU M SCE 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCE12 = 41N 1 basic dynamic load rating(c1) of SCE12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCE8 to SCE25 only

148 . (499) ALUMINUM CASE UNIT(SC, SCE) SCE_W ALUMINUM CASE UNIT LONG Drawing Grease nipple 148 SCE-W Part Number Notation SCE 2 W UU - A N S Aluminum Case Unit Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature ) 1 Outer-sleeves (by corrosion resistance) Blank N R Standard(SUJ2) Electroless nickel plating Raydent treatment Ball type (material) Blank High carbon bearing steel ball(standard) S Stainless steel ball 1 Steel retainer applicable from SCE8W to SCE25W only

149 . (499) ALUMINUM CASE UNIT(SC, SCE) SCE_W ALUMINUM CASE UNIT LONG PART NUMBER L/B h D W H G A J E S 1 S 2 K W L W BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SCE8WUU-B LME8U M SCE12WUU-B LME12U M SCE16WUU-B LME16U M SCE2WUU-B LME2U M SCE25WUU-B LME25U M SCE3WUU-B LME3U M SCE4WUU-B LME4U M SCE5WUU-B LME5U M SCE-W 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCE12W = 65N 1 basic dynamic load rating(c1) of SCE12W = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCE8W to SCE25W only

150 . (499) ALUMINUM CASE UNIT(SC, SCE) SCE_V ALUMINUM CASE UNIT Drawing 15 SCE-V Part Number Notation SCE 2 V UU - A N S European Standard Aluminum Case Unit Nominal Shaft Diameter Compact type Seal Blank No Seal UU Both Side Seal U One Side Seal Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 Outer-sleeves (by corrosion resistance) Blank Standard(SUJ2) N Electroless nickel plating R Raydent treatment Ball type (material) Blank High carbon bearing steelball(standard) S Stainless steel ball 1 Steel retainer applicable from SCE8V to SCE25V only

151 . (499) ALUMINUM CASE UNIT(SC, SCE) SCE_V ALUMINUM CASE UNIT PART NUMBER L/B h D W H G A J E S 1 S 2 L V BASIC LOAD RATING(N) 4 DYNAMIC (C) STATIC (Co) WEIGHT (gf) 2 SCE8VUU-B LME8UU M SCE12VUU-B LME12UU M SCE16VUU-B LME16UU M SCE2VUU-B LME2UU M SCE25VUU-B LME25UU M SCE3VUU-B LME3UU M SCE4VUU-B LME4UU M SCE5VUU-B LME5UU M SCE-V 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCE12V = 41N 1 basic dynamic load rating(c1) of SCE12V = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCE8V to SCE25V only

152 . (499)

153 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS)

154 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LM CLOSED LINEAR BUSHING-SUS SERIES Drawing 154 LM-SUS Part Number Notation LM 2 UU - SUS A SAMICK Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel Ball type : Stainless Steell Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature) 1 1 LM5, LM8S applicable with resin retainer only

155 . (499) LM CLOSED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) PART NUMBER Resin Steel 5 dr. WORKING BORE DIAMETER CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM5UU-SUS LM6UU-SUS LM6-SUSA LM8SUU-SUS LM8UU-SUS LM8-SUSA LM1UU-SUS LM1-SUSA LM12UU-SUS LM12-SUSA LM13UU-SUS LM13-SUSA LM16UU-SUS LM16-SUSA LM2UU-SUS LM2-SUSA LM25UU-SUS LM25-SUSA LM-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) LM12 5 basic dynamic load rating(c) of = 41N LM12 1 basic dynamic load rating(c1) of = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 LM6 to LM25 applicable with steel retainer only (LM8S applicable with resin retainer only)

156 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LM_L LONG LINEAR BUSHING-SUS SERIES Drawing 156 LM-L -SUS Part Number Notation LM 2 L UU - SUS A SAMICK Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1

157 . (499) LM_L LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM6LUU-SUS LM6L-SUSA LM8LUU-SUS LM8L-SUSA LM1LUU-SUS LM1L-SUSA LM12LUU-SUS LM12L-SUSA LM13LUU-SUS LM13L-SUSA LM16LUU-SUS LM16L-SUSA LM2LUU-SUS LM2L-SUSA LM25LUU-SUS LM25L-SUSA LM-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12L = 65N 1 basic dynamic load rating(c1) of LM12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

158 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LM_AJ ADJUSTABLE LINEAR BUSHING-SUS SERIES Drawing 158 LM-AJ -SUS Part Number Notation LM 2 UU AJ - SUS A SAMICK Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Linear Bushing Adjustable type Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 1 LM8SAJ applicable with resin retainer only

159 . (499) LM_AJ ADJUSTABLE LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR W h D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM6UUAJ-SUS LM6AJ-SUSA LM8SUUAJ-SUS LM8UUAJ-SUS LM8AJ-SUSA LM1UUAJ-SUS LM1AJ-SUSA LM12UUAJ-SUS LM12AJ-SUSA LM13UUAJ-SUS LM13AJ-SUSA LM16UUAJ-SUS LM16AJ-SUSA LM2UUAJ-SUS LM2AJ-SUSA LM25UUAJ-SUS LM25AJ-SUSA LM-AJ -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12AJ = 41N 1 basic dynamic load rating(c1) of LM12AJ = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

160 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LM_OP OPEN LINEAR BUSHING-SUS SERIES Drawing 16 LM-OP -SUS Part Number Notation LM 2 UU OP - SUS SAMICK Linear Bushing Nominal Shaft Diameter Seal UU Both Side Seal 1 Linear Bushing Open type Outer-sleeves : Stainless Steel BALL : Stainless Steel 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

161 . (499) LM_OP OPEN LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) PART NUMBER Resin WORKING BORE DIAMETER dr. CLEAR D 4 L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 5 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LM12UUOP-SUS LM13UUOP-SUS LM16UUOP-SUS LM2UUOP-SUS LM25UUOP-SUS LM-OP -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LM12OP = 41N 1 basic dynamic load rating(c1) of LM12OP = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

162 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMF FLANGED LINEAR BUSHING-SUS SERIES Drawing 162 LMF-SUS Part Number Notation LMF 2 UU - SUS A SAMICK Circular Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 1 LMF8S applicable with resin retainer only

163 . (499) LMF FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER CLEAR dr. D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMF6UU-SUS LMF6-SUSA LMF8SUU-SUS LMF8UU-SUS LMF8-SUSA LMF1UU-SUS LMF1-SUSA LMF12UU-SUS LMF12-SUSA LMF13UU-SUS LMF13-SUSA LMF16UU-SUS LMF16-SUSA LMF2UU-SUS LMF2-SUSA LMF25UU-SUS LMF25-SUSA LMF-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMF12 = 41N 1 basic dynamic load rating(c1) of LMF12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

164 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMF_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 164 LMF-L -SUS Part Number Notation LMF 2 L UU - SUS A SAMICK Circular Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature )

165 . (499) LMF_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMF6LUU-SUS LMF6L-SUSA LMF8LUU-SUS LMF8L-SUSA LMF1LUU-SUS LMF1L-SUSA LMF12LUU-SUS LMF12L-SUSA LMF13LUU-SUS LMF13L-SUSA LMF16LUU-SUS LMF16L-SUSA LMF2LUU-SUS LMF2L-SUSA LMF25LUU-SUS LMF25L-SUSA LMF-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMF12L = 65N 1 basic dynamic load rating(c1) of LMF12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

166 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMK FLANGED LINEAR BUSHING-SUS SERIES Drawing 166 LMK-SUS Part Number Notation LMK 2 UU - SUS A SAMICK Square Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 1 LMK8S applicable with resin retainer only

167 . (499) LMK FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMK6UU-SUS LMK6-SUSA LMK8SUU-SUS LMK8UU-SUS LMK8-SUSA LMK1UU-SUS LMK1-SUSA LMK12UU-SUS LMK12-SUSA LMK13UU-SUS LMK13-SUSA LMK16UU-SUS LMK16-SUSA LMK2UU-SUS LMK2-SUSA LMK25UU-SUS LMK25-SUSA LMK-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMK12 = 41N 1 basic dynamic load rating(c1) of LMK12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

168 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMK_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 168 LMK-L -SUS Part Number Notation LMK 2 L UU - SUS A SAMICK Square Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

169 . (499) LMK_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF WEIGHT BALL (gf) 2 ROW LMK6LUU-SUS LMK6L-SUSA LMK8LUU-SUS LMK8L-SUSA LMK1LUU-SUS LMK1L-SUSA LMK12LUU-SUS LMK12L-SUSA LMK13LUU-SUS LMK13L-SUSA LMK16LUU-SUS LMK16L-SUSA LMK2LUU-SUS LMK2L-SUSA LMK25LUU-SUS LMK25L-SUSA LMK-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMK12L = 65N 1 basic dynamic load rating(c1) of LMK12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

170 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMH FLANGED LINEAR BUSHING-SUS SERIES Drawing 17 LMH-SUS Part Number Notation LMH 2 UU - SUS A SAMICK Oval Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

171 . (499) LMH FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMH6UU-SUS LMH6-SUSA LMH8UU-SUS LMH8-SUSA LMH1UU-SUS LMH1-SUSA LMH12UU-SUS LMH12-SUSA LMH13UU-SUS LMH13-SUSA LMH16UU-SUS LMH16-SUSA LMH2UU-SUS LMH2-SUSA LMH25UU-SUS LMH25-SUSA LMH-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMH12 = 41N 1 basic dynamic load rating(c1) of LMH12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

172 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMH_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 172 LMH-L -SUS Part Number Notation LMH 2 L UU - SUS A SAMICK Oval Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

173 . (499) LMH_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMH6LUU-SUS LMH6L-SUSA LMH8LUU-SUS LMH8L-SUSA LMH1LUU-SUS LMH1L-SUSA LMH12LUU-SUS LMH12L-SUSA LMH13LUU-SUS LMH13L-SUSA LMH16LUU-SUS LMH16L-SUSA LMH2LUU-SUS LMH2L-SUSA LMH25LUU-SUS LMH25L-SUSA LMH-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMH12L = 65N 1 basic dynamic load rating(c1) of LMH12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

174 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMFP FLANGED LINEAR BUSHING-SUS SERIES Drawing 174 LMFP- SUS Part Number Notation LMFP 2 UU - SUS A SAMICK Circular Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

175 . (499) LMFP FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMFP6UU-SUS LMFP6-SUSA LMFP8UU-SUS LMFP8-SUSA LMFP1UU-SUS LMFP1-SUSA LMFP12UU-SUS LMFP12-SUSA LMFP13UU-SUS LMFP13-SUSA LMFP16UU-SUS LMFP16-SUSA LMFP2UU-SUS LMFP2-SUSA LMFP25UU-SUS LMFP25-SUSA LMFP- SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMFP12 = 41N 1 basic dynamic load rating(c1) of LMFP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

176 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMFP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 176 LMFP-L -SUS Part Number Notation LMFP 2 L UU - SUS A SAMICK Circular Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank No Seal UU Both Side Seal U One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank esin Retainer(Standard) A Steel Retainer(High temperature)

177 . (499) LMFP_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMFP6LUU-SUS LMFP6L-SUSA LMFP8LUU-SUS LMFP8L-SUSA LMFP1LUU-SUS LMFP1L-SUSA LMFP12LUU-SUS LMFP12L-SUSA LMFP13LUU-SUS LMFP13L-SUSA LMFP16LUU-SUS LMFP16L-SUSA LMFP2LUU-SUS LMFP2L-SUSA LMFP25LUU-SUS LMFP25L-SUSA LMFP-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMFP12L = 65N 1 basic dynamic load rating(c1) of LMFP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

178 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMKP FLANGED LINEAR BUSHING-SUS SERIES Drawing 178 LMKP -SUS Part Number Notation LMKP 2 UU - SUS A SAMICK Square Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

179 . (499) LMKP FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMKP6UU-SUS LMKP6-SUSA LMKP8UU-SUS LMKP8-SUSA LMKP1UU-SUS LMKP1-SUSA LMKP12UU-SUS LMKP12-SUSA LMKP13UU-SUS LMKP13-SUSA LMKP16UU-SUS LMKP16-SUSA LMKP2UU-SUS LMKP2-SUSA LMKP25UU-SUS LMKP25-SUSA LMKP -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMKP12 = 41N 1 basic dynamic load rating(c1) of LMKP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

180 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMKP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 18 LMKP-L -SUS Part Number Notation LMKP 2 L UU - SUS A SAMICK Square Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

181 . (499) LMKP_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMKP6LUU-SUS LMKP6L-SUSA LMKP8LUU-SUS LMKP8L-SUSA LMKP1LUU-SUS LMKP1L-SUSA LMKP12LUU-SUS LMKP12L-SUSA LMKP13LUU-SUS LMKP13L-SUSA LMKP16LUU-SUS LMKP16L-SUSA LMKP2LUU-SUS LMKP2L-SUSA LMKP25LUU-SUS LMKP25L-SUSA LMKP-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMKP12L = 65N 1 basic dynamic load rating(c1) of LMKP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

182 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMHP FLANGED LINEAR BUSHING-SUS SERIES Drawing 182 LMHP -SUS Part Number Notation LMHP 2 UU - SUS A SAMICK Oval Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

183 . (499) LMHP FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMHP6UU-SUS LMHP6-SUSA LMHP8UU-SUS LMHP8-SUSA LMHP1UU-SUS LMHP1-SUSA LMHP12UU-SUS LMHP12-SUSA LMHP13UU-SUS LMHP13-SUSA LMHP16UU-SUS LMHP16-SUSA LMHP2UU-SUS LMHP2-SUSA LMHP25UU-SUS LMHP25-SUSA LMHP -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMHP12 = 41N 1 basic dynamic load rating(c1) of LMHP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

184 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMHP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 184 LMHP-L -SUS Part Number Notation LMHP 2 L UU - SUS A SAMICK Circular Middle Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

185 . (499) LMHP_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMHP6LUU-SUS LMHP6L-SUSA LMHP8LUU-SUS LMHP8L-SUSA LMHP1LUU-SUS LMHP1L-SUSA LMHP12LUU-SUS LMHP12L-SUSA LMHP13LUU-SUS LMHP13L-SUSA LMHP16LUU-SUS LMHP16L-SUSA LMHP2UU-SUS LMHP2L-SUSA LMHP25LUU-SUS LMHP25L-SUSA LMHP-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMHP12L = 65N 1 basic dynamic load rating(c1) of LMHP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

186 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMFM FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 186 LMFM -SUS Part Number Notation LMFM 2 UU - SUS A SAMICK Square Middle Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature)

187 . (499) LMFM FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMFM6UU-SUS LMFM6-SUSA LMFM8UU-SUS LMFM8-SUSA LMFM1UU-SUS LMFM1-SUSA LMFM12UU-SUS LMFM12-SUSA LMFM13UU-SUS LMFM13-SUSA LMFM16UU-SUS LMFM16-SUSA LMFM2UU-SUS LMFM2-SUSA LMFM25UU-SUS LMFM25-SUSA LMFM -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMFM12 = 65N 1 basic dynamic load rating(c1) of LMFM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

188 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMKM FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 188 LMKM -SUS Part Number Notation LMKM 2 UU - SUS A SAMICK Square Middle Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

189 . (499) LMKM FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMKM6UU-SUS LMKM6-SUSA LMKM8UU-SUS LMKM8-SUSA LMKM1UU-SUS LMKM1-SUSA LMKM12UU-SUS LMKM12-SUSA LMKM13UU-SUS LMKM13-SUSA LMKM16UU-SUS LMKM16-SUSA LMKM2UU-SUS LMKM2-SUSA LMKM25UU-SUS LMKM25-SUSA LMKM -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMKM12 = 65N 1 basic dynamic load rating(c1) of LMKM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

190 . (499) SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) LMHM FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 19 LMHM -SUS Part Number Notation LMHM 2 UU - SUS A SAMICK Oval Middle Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

191 . (499) LMHM FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES ASIAN STANDARD LINEAR BUSHING(LM-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H W A F d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMHM6UU-SUS LMHM6-SUSA LMHM8UU-SUS LMHM8-SUSA LMHM1UU-SUS LMHM1-SUSA LMHM12UU-SUS LMHM12-SUSA LMHM13UU-SUS LMHM13-SUSA LMHM16UU-SUS LMHM16-SUSA LMHM2UU-SUS LMHM2-SUSA LMHM25UU-SUS LMHM25-SUSA LMHM -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMHM12 = 65N 1 basic dynamic load rating(c1) of LMHM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

192 . (499)

193 . (499) SUS SERIES EUROPEAN STANDARD(LME-SUS)

194 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LME CLOSED LINEAR BUSHING-SUS SERIES Drawing 194 LME-SUS Part Number Notation LME 2 UU - SUS A European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 1 LME5 applicable with resin retainer only

195 . (499) LME CLOSED LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME5UU-SUS LME8UU-SUS LME8-SUSA LME12UU-SUS LME12-SUSA LME16UU-SUS LME16-SUSA LME2UU-SUS LME2-SUSA LME25UU-SUS LME25-SUSA LME-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12 = 41N 1 basic dynamic load rating(c1) of LME12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

196 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LME_L LONG LINEAR BUSHING-SUS SERIES Drawing 196 LME-L -SUS Part Number Notation LME 2 L UU - SUS A European Standard Samick Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

197 . (499) LME_L LONG LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR W D 1 BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME8LUU-SUS LME8L-SUSA LME12LUU-SUS LME12L-SUSA LME16LUU-SUS LME16L-SUSA LME2LUU-SUS LME2L-SUSA LME25LUU-SUS LME25L-SUSA LME-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12L = 65N 1 basic dynamic load rating(c1) of LME12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

198 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LME_AJ ADJUSTABLE LINEAR BUSHING-SUS SERIES Drawing 198 LME-AJ -SUS Part Number Notation LME 2 UU AJ - SUS A European Standard Samick Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Linear Bushing Adjustable type Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature) 1 1 LME5AJ applicable with steel retainer

199 . (499) LME_AJ ADJUSTABLE LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D 4 L B CLEAR CLEAR CLEAR W D 1 h BASIC LOAD RATING(N) 5 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME5UUAJ-SUS LME8UUAJ-SUS LME8AJ-SUSA LME12UUAJ-SUS LME12AJ-SUSA LME16UUAJ-SUS LME16AJ-SUSA LME2UUAJ-SUS LME2AJ-SUSA LME25UUAJ-SUS LME25AJ-SUSA LME-AJ -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12AJ = 41N 1 basic dynamic load rating(c1) of LME12AJ = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

200 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LME_OP OPEN LINEAR BUSHING-SUS SERIES Drawing 2 LME-OP -SUS Part Number Notation LME 2 UU OP - SUS European Standard Samick Linear Bushing Nominal Shaft Diameter Seal UU Both Side Seal 1 Linear Bushing Open type Outer-sleeves : Stainless Steel Ball type : Stainless Steel 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

201 . (499) LME_OP OPEN LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) PART NUMBER Resin WORKING BORE DIAMETER dr. CLEAR D 4 L B CLEAR CLEAR CLEAR W D 1 h BASIC LOAD RATING(N) 5 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LME12UUOP-SUS LME16UUOP-SUS LME2UUOP-SUS LME25UUOP-SUS LME-OP -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LME12OP = 41N 1 basic dynamic load rating(c1) of LME12OP = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 Outer diameter is the obtained value before the slotting process. 5 1N.12kgf

202 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEF FLANGED LINEAR BUSHING-SUS SERIES Drawing 22 LMEF -SUS Part Number Notation LMEF 2 UU - SUS A European Standard Samick Circular Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

203 . (499) LMEF FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEF8UU-SUS LMEF8-SUSA LMEF12UU-SUS LMEF12-SUSA LMEF16UU-SUS LMEF16-SUSA LMEF2UU-SUS LMEF2-SUSA LMEF25UU-SUS LMEF25-SUSA LMEF -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEF12 = 41N 1 basic dynamic load rating(c1) of LMEF12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

204 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEF_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 24 LMEF-L -SUS Part Number Notation LMEF 2 L UU - SUS A European Standard Samick Circular Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

205 . (499) LMEF_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L B CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEF8LUU-SUS LMEF8L-SUSA LMEF12LUU-SUS LMEF12L-SUSA LMEF16LUU-SUS LMEF16L-SUSA LMEF2LUU-SUS LMEF2L-SUSA LMEF25LUU-SUS LMEF25L-SUSA LMEF-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEF12L = 65N 1 basic dynamic load rating(c1) of LMEF12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

206 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEK FLANGED LINEAR BUSHING-SUS SERIES Drawing 26 LMEK -SUS Part Number Notation LMEK 2 UU - SUS A European Standard Samick Square Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature)

207 . (499) LMEK FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEK8UU-SUS LMEK8-SUSA LMEK12UU-SUS LMEK12-SUSA LMEK16UU-SUS LMEK16-SUSA LMEK2UU-SUS LMEK2-SUSA LMEK25UU-SUS LMEK25-SUSA LMEK -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEK12 = 41N 1 basic dynamic load rating(c1) of LMEK12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

208 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEK_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 28 LMEK-L -SUS Part Number Notation LMEK 2 L UU - SUS A European Standard Samick Square Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel Ball type : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

209 . (499) LMEK_L FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEK8LUU-SUS LMEK8L-SUSA LMEK12LUU-SUS LMEK12L-SUSA LMEK16LUU-SUS LMEK16L-SUSA LMEK2LUU-SUS LMEK2L-SUSA LMEK25LUU-SUS LMEK25L-SUSA LMEK-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEK12 = 65N 1 basic dynamic load rating(c1) of LMEK12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

210 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEFP FLANGED LINEAR BUSHING-SUS SERIES Drawing 21 LMEFP -SUS Part Number Notation LMEFP 2 UU - SUS A European Standard Samick Circular Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

211 . (499) LMEFP FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEFP8UU-SUS LMEFP8-SUSA LMEFP12UU-SUS LMEFP12-SUSA LMEFP16UU-SUS LMEFP16-SUSA LMEFP2UU-SUS LMEFP2-SUSA LMEFP25UU-SUS LMEFP25-SUSA LMEFP -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEFP12 = 41N 1 basic dynamic load rating(c1) of LMEFP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

212 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEFP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 212 LMEFP-L -SUS Part Number Notation LMEFP 2 L UU - SUS A European Standard Samick Circular Pilot Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

213 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEFP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEFP8LUU-SUS LMEFP8L-SUSA LMEFP12LUU-SUS LMEFP12L-SUSA LMEFP16LUU-SUS LMEFP16L-SUSA LMEFP2LUU-SUS LMEFP2L-SUSA LMEFP25LUU-SUS LMEFP25L-SUSA LMEFP-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEFP12L = 65N 1 basic dynamic load rating(c1) of LMEFP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

214 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEKP FLANGED LINEAR BUSHING-SUS SERIES Drawing 214 LMEKP -SUS Part Number Notation LMEKP 2 UU - SUS A European Standard Samick Squared Pilot Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

215 . (499) LMEKP FLANGED LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEKP8UU-SUS LMEKP8-SUSA LMEKP12UU-SUS LMEKP12-SUSA LMEKP16UU-SUS LMEKP16-SUSA LMEKP2UU-SUS LMEKP2-SUSA LMEKP25UU-SUS LMEKP25-SUSA LMEKP -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEKP12 = 41N 1 basic dynamic load rating(c1) of LMEKP12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

216 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEKP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 216 LMEKP-L -SUS Part Number Notation LMEKP 2 L UU - SUS A European Standard Samick Square Pilot Flanged Linear Bushing Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

217 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEKP_L FLANGED LONG LINEAR BUSHING-SUS SERIES Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEKP8LUU-SUS LMEKP8L-SUSA LMEKP12LUU-SUS LMEKP12L-SUSA LMEKP16LUU-SUS LMEKP16L-SUSA LMEKP2LUU-SUS LMEKP2L-SUSA LMEKP25LUU-SUS LMEKP25L-SUSA LMEKP-L -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEKP12L = 65N 1 basic dynamic load rating(c1) of LMEKP12L = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

218 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEFM FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 218 LMEFM -SUS Part Number Notation LMEFM 2 UU - SUS A European Standard Samick Circular Middle Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

219 . (499) LMEFM FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEFM8UU-SUS LMEFM8-SUSA LMEFM12UU-SUS LMEFM12-SUSA LMEFM16UU-SUS LMEFM16-SUSA LMEFM2UU-SUS LMEFM2-SUSA LMEFM25UU-SUS LMEFM25-SUSA LMEFM -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEFM12 = 65N 1 basic dynamic load rating(c1) of LMEFM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

220 . (499) SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) LMEKM FLANGED LONG LINEAR BUSHING-SUS SERIES Drawing 22 LMEKM -SUS Part Number Notation LMEKM 2 UU - SUS A European Standard Samick Square Middle Flanged Linear Bushing Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

221 . (499) LMEKM FLANGED LONG LINEAR BUSHING-SUS SERIES SUS SERIES EUROPEAN STANDARD LINEAR BUSHING(LME-SUS) Resin PART NUMBER Steel WORKING BORE DIAMETER dr. CLEAR D L D 1 CLEAR CLEAR CLEAR H PCD K d 1 d 2 h SQUAR ENESS ) BASIC LOAD RATING(N) 4 DYNAMIC (C) STATIC (Co) NO. OF BALL ROW WEIGHT (gf) 2 LMEKM8UU-SUS LMEKM8-SUSA LMEKM12UU-SUS LMEKM12-SUSA LMEKM16UU-SUS LMEKM16-SUSA LMEKM2UU-SUS LMEKM2-SUSA LMEKM25UU-SUS LMEKM25-SUSA LMEKM -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of LMEKM12 = 65N 1 basic dynamic load rating(c1) of LMEKM12 = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

222 . (499)

223 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS)

224 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SC ALUMINUM CASE UNIT-SUS SERIES Drawing 224 SC-SUS Part Number Notation SC 2 UU N - SUS A Aluminum Case Unit Nominal Shaft Diameter Seal New type Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

225 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SC ALUMINUM CASE UNIT-SUS SERIES Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 K L BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8UU-SUS SC8-SUSA LM8UU-SUS M SC1UU-SUS SC1-SUSA LM1UU- SUS M SC12UU-SUS SC12-SUSA LM12UU- SUS M SC12UUN-SUS SC12N-SUSA LM12UU- SUS M SC13UU-SUS SC13-SUSA LM13UU- SUS M SC16UU-SUS SC16-SUSA LM16UU- SUS M SC2UU-SUS SC2-SUSA LM2UU- SUS M SC25UU-SUS SC25-SUSA LM25UU- SUS M SC-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12 = 41N 1 basic dynamic load rating(c1) of SC12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8 to SC25 only

226 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCW ALUMINUM CASE UNIT LONG-SUS SERIES Drawing Grease nipple 226 SCW-SUS Part Number Notation SC 2 W UU - SUS A Aluminum Case Unit Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature)

227 . (499) SCW ALUMINUM CASE UNIT LONG-SUS SERIES SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 K W L W BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8WUU-SUS SC8W-SUSA LM8U-SUS M SC1WUU-SUS SC1W-SUSA LM1U-SUS M SC12WUU-SUS SC12W-SUSA LM12U-SUS M SC13WUU-SUS SC13W-SUSA LM13U-SUS M SC16WUU-SUS SC16W-SUSA LM16U-SUS M SC2WUU-SUS SC2W-SUSA LM2U-SUS M SC25WUU-SUS SC25W-SUSA LM25U-SUS M SCW-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12W = 65N 1 basic dynamic load rating(c1) of SC12W = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 SC8W to SC25W applicable with steel retainer only

228 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCW_N ALUMINUM CASE UNIT LONG-SUS SERIES Drawing Grease nipple 228 SCW-N -SUS Part Number Notation SC 2 W UU N - SUS A Aluminum Case Unit Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal New type Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

229 . (499) SCW_N ALUMINUM CASE UNIT LONG-SUS SERIES SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 K W L W BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8WUUN-SUS SC8WN-SUSA LM8U-SUS M SC1WUUN-SUS SC1WN-SUSA LM1U-SUS M SC12WUUN-SUS SC12WN-SUSA LM12U-SUS M SC13WUUN-SUS SC13WN-SUSA LM13U-SUS M SC16WUUN-SUS SC16WN-SUSA LM16U-SUS M SC2WUUN-SUS SC2WN-SUSA LM2U-SUS M SC25WUUN-SUS SC25WN-SUSA LM25U-SUS M SCW-N -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12WN = 65N 1 basic dynamic load rating(c1) of SC12WN = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8WN to SC25WN only

230 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCV ALUMINUM CASE UNIT-SUS SERIES Drawing 23 SCV-SUS Part Number Notation SC 2 V UU N - SUS A Aluminum Case Unit Nominal Shaft Diameter Compact type Seal New type Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

231 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCV ALUMINUM CASE UNIT-SUS SERIES Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 L V BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SC8VUU-SUS SC8V-SUSA LM8UU-SUS M SC1VUU-SUS SC1V-SUSA LM1UU-SUS M SC12VUU-SUS SC12V-SUSA LM12UU-SUS M SC12VUUN-SUS SC12VN-SUSA LM12UU-SUS M SC13VUU-SUS SC13V-SUSA LM13UU-SUS M SC16VUU-SUS SC16V-SUSA LM16UU-SUS M SC2VUU-SUS SC2V-SUSA LM2UU-SUS M SC25VUU-SUS SC25V-SUSA LM25UU-SUS M SCV-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SC12V = 41N 1 basic dynamic load rating(c1) of SC12V = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SC8V to SC25V only

232 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCJ ADJUSTABLE ALUMINUM CASE UNIT-SUS SERIES Drawing 232 SCJ-SUS Part Number Notation SCJ 2 UU - SUS A Aluminum Case Unit(Adjustable type) Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

233 . (499) SCJ ADJUSTABLE ALUMINUM CASE UNIT-SUS SERIES SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) Resin PART NUMBER Steel L/B h D W H G A J E S 1 K L M BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) OUTER DIAME TER WEIGHT (gf) 2 SCJ1UU-SUS SCJ1-SUSA LM1UUAJ-SUS M M SCJ12UU-SUS SCJ12-SUSA LM12UUAJ-SUS M M SCJ13UU-SUS SCJ13-SUSA LM13UUAJ-SUS M M SCJ16UU-SUS SCJ16-SUSA LM16UUAJ-SUS M M SCJ2UU-SUS SCJ2-SUSA LM2UUAJ-SUS M M SCJ25UU-SUS SCJ25-SUSA LM25UUAJ-SUS M M SCJ-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCJ12 = 41N 1 basic dynamic load rating(c 1) of SCJ12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCJ1 to SCJ25 only

234 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SBR ALUMINUM CASE UNIT OPEN-SUS SERIES Drawing 234 SBR-SUS Part Number Notation SBR 2 UU - SUS Aluminum Case Unit(Open type) Nominal Shaft Diameter Seal UU Both Side Seal 1 Outer-sleeves : Stainless Steel BALL : Stainless Steel 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

235 . (499) SBR ALUMINUM CASE UNIT OPEN-SUS SERIES SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) PART NUMBER L/B D W G A M S 1 h 1 E J K BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SBR16UU-SUS LM16UUOP-SUS M SBR2UU-SUS LM2UUOP-SUS M SBR25UU-SUS LM25UUOP-SUS M SBR-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SBR16 = 77N 1 basic dynamic load rating(c1) of SBR16 = 77/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

236 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) TBR ALUMINUM CASE UNIT OPEN Drawing 236 TBR Part Number Notation TBR 2 UU - SUS Aluminum Case Unit(Open type) Nominal Shaft Diameter Seal UU Both Side Seal 1 Outer-sleeves : Stainless Steel BALL : Stainless Steel 1 UU type only available. No seal type & One side seal type not available. Resin retainer only applicable

237 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) TBR ALUMINUM CASE UNIT OPEN PART NUMBER L/B D W G A M S 1 h 1 E J K BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 TBR16UU-SUS LM16UUOP-SUS M TBR2UU-SUS LM2UUOP-SUS M TBR25UU-SUS LM25UUOP-SUS M TBR3UU-SUS LM3UUOP-SUS M TBR 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of TBR16UU = 392N 1 basic dynamic load rating(c1) of TBR16UU = 392 / 1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf

238 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCE ALUMINUM CASE UNIT-SUS SERIES Drawing 238 SCE-SUS Part Number Notation SCE 2 UU - SUS A European Standard Aluminum Case Unit Nominal Shaft Diameter Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature)

239 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCE ALUMINUM CASE UNIT-SUS SERIES Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 K L BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SCE8UU-SUS SCE8-SUSA LME8UU-SUS M SCE12UU-SUS SCE12-SUSA LME12UU-SUS M SCE16UU-SUS SCE16-SUSA LME16UU-SUS M SCE2UU-SUS SCE2-SUSA LME2UU-SUS M SCE25UU-SUS SCE25-SUSA LME25UU-SUS M SCE-SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCE12 = 41N 1 basic dynamic load rating(c1) of SCE12 = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCE8 to SCE25 only

240 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCE_W ALUMINUM CASE UNIT LONG-SUS SERIES Drawing Grease nipple 24 SCE-W -SUS Part Number Notation SCE 2 W UU - SUS A Aluminum Case Unit Nominal Shaft Diameter Linear Bushing Long Type (for high load) Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank A Resin Retainer(Standard) Steel Retainer(High temperature)

241 . (499) SCE_W ALUMINUM CASE UNIT LONG-SUS SERIES SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 K W L W BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SCE8WUU-SUS SCE8W-SUSA LME8U-SUS M SCE12WUU-SUS SCE12W-SUSA LME12U-SUS M SCE16WUU-SUS SCE16W-SUSA LME16U-SUS M SCE2WUU-SUS SCE2W-SUSA LME2U-SUS M SCE25WUU-SUS SCE25W-SUSA LME25U-SUS M SCE-W -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCE12W = 65N 1 basic dynamic load rating(c1) of SCE12W = 65/1.26 = N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCE8W to SCE25W only

242 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCE_V ALUMINUM CASE UNIT-SUS SERIES Drawing 242 SCE-V -SUS Part Number Notation SCE 2 V UU - SUS A European Standard Aluminum Case Unit Nominal Shaft Diameter Compact type Seal Blank UU U No Seal Both Side Seal One Side Seal Outer-sleeves : Stainless Steel BALL : Stainless Steel Retainer (material) Blank Resin Retainer(Standard) A Steel Retainer(High temperature)

243 . (499) SUS SERIES ALUMINUM CASE UNIT(SC, SCE-SUS) SCE_V ALUMINUM CASE UNIT-SUS SERIES Resin PART NUMBER Steel L/B h D W H G A J E S 1 S 2 L V BASIC LOAD RATING(N) 4 DYNAMIC (C) 1 STATIC (Co) WEIGHT (gf) 2 SCE8VUU-SUS SCE8V-SUSA LME8UU-SUS M SCE12VUU-SUS SCE12V-SUSA LME12UU-SUS M SCE16VUU-SUS SCE16V-SUSA LME16UU-SUS M SCE2VUU-SUS SCE2V-SUSA LME2UU-SUS M SCE25VUU-SUS SCE25V-SUSA LME25UU-SUS M SCE-V -SUS 1 Dynamic load rating is based on the nominal life of 5 In case of 1, C on the table need to be divided by 1.26 Ex) 5 basic dynamic load rating(c) of SCE12V = 41N 1 basic dynamic load rating(c1) of SCE12V = 41/1.26 = 325.4N 2 Based on the weight of resin retainer 3 Main unit : 4 1N.12kgf 5 Steel retainer applicable from SCE8V to SCE25V only

244 . (499)

245 . (499) LM Shaft & Support Rail Unit

246 . (499) LM Shaft & Support Rail Unit SAMICK Support Rail Unit SAMICK Support Rail Unit is assembled of Support Rail, LM Shaft, and Open type Linear Bushing Case. All components are standardized for providing interchangeability, and less cost and designing time. Part Number Notation SBS C g6 3-1 L SAMICK Support Rail Unit SBS Support Rail Unit for SBR TBS Support Rail Unit for TBR 246 SBS & TBS Shaft (by corrosion resistance) Blank Standard(SUJ2) C Chrome plated shaft N Nickel plated shaft R Raydent treated shaft Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter Shaft Length 16~5 1~3 SAMICK LM Shaft SAMICK supply precision LM shaft for SAMICK Linear Bushing. The hardness, surface finishing, and tolerance of shaft must be considered for choosing the proper shaft because the balls are running directly on the shaft surface. Shaft dimensions are as follows - Material : High carbon chromium bearing steel - Hardness : HRC58~64 - Hardened depth :.8 ~2.5 - Straightness :.5 / 3

247 . (499) LM Shaft & Support Rail Unit Part Number Notation SF C g6 3-1 L SAMICK Support Rail Unit Shaft (by corrosion resistance) Blank Standard(SUJ2) C Chrome plated shaft N 1 Nickel plated shaft R Raydent treated shaft Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter Shaft Length 1 under 1m length 5~8 1~3 LM Shaft special processing <Example> Drilled or tapped radial hole Drill or Tap at the end of LM shaft Reduced diameter Snap ring groove 247 SF & SK Threaded diameters Flats Keyways SAMICK LM shaft support Part Number Notation SK 2 SAMICK LM shaft support (Material : Aluminum) SK Shaft Diameter (8~4)

248 . (499) LM Shaft & Support Rail Unit SBS SUPPORT RAIL UNIT Drawing 248 SBS Part Number Notation SBS C g6 3-1 L SAMICK Support Rail Unit Type SBR Support Rail Unit for SBR Shaft (by corrosion resistance) Blank Standard(SUJ2) C Chrome plated shaft N Nickel plated shaft R Raydent treated shaft Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter 16~5 Shaft Length 1~3

249 . (499) LM Shaft & Support Rail Unit SBS SUPPORT RAIL UNIT PART NUMBER LM SHAFT OUTER DIAMETER E h B H T F X Y C S 1 a 1 a 2 d 1 WEIGHT (kgf/m) SBS SBS SBS SBS SBS SBS SBS PART NUMBER MAX. LENGTH P N (NH) SBS (4) 75(4) 1(5) 5(7) 75(8) 25(1) 5(11) 75(12) 25(14) 5(16) 75(16) 25(18) 75(2) SBS (4) 75(4) 1(5) 5(7) 75(8) 25(1) 5(11) 75(12) 25(14) 5(16) 75(16) 25(18) 75(2) 249 SBS SBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) SBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) SBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) SBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) SBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) 1 N values can vary depending on length of Shaft 2 NH (Number of Holes): the number of mounting hole according to pitch value. 4 WEIGHT is including LM Shaft's weight. 5 1N.12kgf

250 . (499) LM Shaft & Support Rail Unit TBS SUPPORT RAIL UNIT Drawing 25 TBS Part Number Notation TBS C g6 3-1 L SAMICK Support Rail Unit Type TBS Support Rail Unit for TBR Shaft (by corrosion resistance) Blank Standard(SUJ2) C Chrome plated shaft N Nickel plated shaft R Raydent treated shaft Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter 16~3 Shaft Length 1~3

251 . (499) LM Shaft & Support Rail Unit TBS SUPPORT RAIL UNIT PART NUMBER LM SHAFT OUTER DIAMETER E h B H T X C S 1 a 1 a 2 d 1 WEIGHT (kgf/m) TBS TBS TBS TBS PART NUMBER MAX. LENGTH ( P N (NH) TBS (4) 75(4) 1(5) 5(7) 75(8) 25(1) 5(11) 75(12) 25(14) 5(16) 75(16) 25(18) 75(2) 251 TBS TBS (4) 75(4) 1(5) 5(7) 75(8) 25(1) 5(11) 75(12) 25(14) 5(16) 75(16) 25(18) 75(2) TBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) TBS (3) 1(3) 1(4) 1(5) 1(6) 1(7) 1(8) 1(9) 1(1) 1(11) 1(12) 1(13) 1(15) 1 N values can vary depending on length of Shaft NH (Number of Holes): the number of mounting hole according to pitch value. WEIGHT is including LM Shaft's weight. 1N.12kgff

252 . (499) LM Shaft & Support Rail Unit SK Shaft Support Drawing Tightening bolt 252 SK Part Number Notation SK 2 SAMICK LM shaft support (Material : Aluminum) Shaft Diameter : 8~4

253 . (499) LM Shaft & Support Rail Unit SK Shaft Support PART NUMBER LM SHAFT DIAMETER h A W H T E D C B S J WEIGHT (gf) SK M4 24 SK M4 24 SK M4 3 SK M4 3 SK M4 4 SK M5 7 SK M6 13 SK M6 18 SK M8 27 SK M SK

254 . (499) LM Shaft & Support Rail Unit SF LM Shaft Drawing 254 SF Part Number Notation SF C g6 3-1 L SAMICK LM Shaft Shaft (by corrosion resistance) Blank Standard(SUJ2) C Chrome plated shaft N 1 Nickel plated shaft R Raydent treatment Shaft tolerance g6 Asian standard h6 European standard Shaft Diameter 5~8 Shaft Length 1~3 1 Under 1m length

255 . (499) LM Shaft & Support Rail Unit SF LM Shaft diameter Shaft toleranc (g6) WEIGHT (kg/m) MAX. LENGTH MaterialSUJ2(High carbon chromium bearing steel) HardnessHRC 58~64 Hardened depth.8~2.5 Surface finishing :.8S~1.6S Straightness :.5/3 255 SF

256 . (499)

257 . (499) References

258 . (499) Hardness Conversion Table 258 Hardness Conversion Table

259 . (499) Fitting Tolerances for Shaft and Housing Bore Diameter(Metric Series) Nominal Diameter Tolerance of Shaft Diameter() f g h js j k over incl f5 f6 f7 g5 g6 g7 h5 h6 h7 h8 js5 js6 js7 j5 j6 j7 k5 k6 k Nominal Diameter ±2 ±3 ±5 ±2.5 ±4 ±5 ±3 ±4.5 ±7 ±4 ±5.5 ±9 ±4.5 ±6.5 ±1 ±5.5 ±8 ±12 ±6.5 ±9.5 ±15 ±7.5 ±11 ±17 ±9 ±12.5 ±2 Tolerance of Shaft Diameter() H JS J K M Fitting Tolerance over incl H5 H6 H7 H8 JS5 JS6 JS7 JS8 J6 J7 J8 K6 K7 K8 M6 M7 M ±2 ±3 ±5 ± ±2.5 ±4 ±6 ± ±3 ±4.5 ±7 ± ±4 ±5.5 ±9 ± ±4.5 ±6.5 ±1 ± ±5.5 ±8 ±12 ± ±6.5 ±9.5 ±15 ± ±7.5 ±11 ±17 ±27 ±9 ±12.5 ±2 ±

260 . (499) Fitting Tolerances for Shaft and Housing Bore Diameter(inch Series) Tolerance of housing bore OVER BELOW OVER BELOW OVER BELOW OVER BELOW OVER BELOW OVER BELOW 26 Fitting Tolerance (inch) OVER BELOW Tolerance of Shaft Diameter OVER BELOW OVER BELOW OVER BELOW OVER BELOW OVER BELOW OVER BELOW OVER BELOW

261 . (499) Equations for shaft deflection amount calculation Variations of support and Load 261 Equations for shaft deflection amount calculation

262 . (499)

263 . (499)

264 . (499) CATALOG NO. 161E