DRAWER LOCK 19 MM AND 22 MM NOZZLE LENGTHS. Applications. Specifications. Code Information. Ordering Details

Transcription

1 DRAWER LOCK 19 MM AND 22 MM NOZZLE LENGTHS This lock is ideal for use on drawers. Rotating the key 180º results in 9 mm vertical bolt movement. The lock fits into a 19.1 mm diameter hole from the rear of a panel. Screws then secure the lock from the back. Zinc alloy diecast housing Pressed steel back plate - passivated Vertical bolt operation Zinc-plated steel bolt Optional bezel - refer to page P1V 19 mm (suits 16 mm board) - P2V 22 mm (suits 19 mm board) 3 right chrome 180º clockwise or anti-clockwise to unlock OLT PROJECTION R F Round face Flat face OLT TYPE - - Refer to page 101 9,0 throw A/P1V 28,0 when using R bolt 12,5 19,0 (P1V) 22,0 (P2V) 5,0 2,0 1, ,0 Top of drawer ø3,5 hole Min. Note: fixing holes ø if bezel is used A / P1V / / + / - OLT PROJECTION + OLT TYPE (19 mm nozzle) A / P2V / / + / - OLT PROJECTION + OLT TYPE (22 mm nozzle) Ordering example: A / P 1 V / 0 1 / 3 / - R R 8

2 CUPOARD LOCK 19 MM AND 22 MM NOZZLE LENGTHS This lock is ideal for use on cupboards. Rotating the key 180º results in 9 mm horizontal bolt movement. The lock fits into a 19.1 mm diameter hole from the rear of a panel. Screws then secure the lock from the back. A/P1R Zinc alloy diecast housing Pressed steel back plate - passivated Horizontal bolt operation Zinc-plated steel bolt Optional bezel - refer to page 101 A/P1L - P1L and P1R 19 mm - P2L and P2R 22 mm 3 right chrome 180º clockwise to unlock - left edge bolt 180º anti-clockwise to unlock - right edge bolt OLT PROJECTION R F Round face Flat face OLT TYPE 5,0 - - Refer to page 101 ø3,5 fixing holes countersunk from rear 35,0 12,5 28,0 when using R bolt 2,0 1,8 19,0 (P1L & P1R) 22,0 (P2L & P2R) ,0 throw Edge of cupboard door A/P1L// + /- OLT PROJECTION + OLT TYPE (19 mm left edge bolt) A/P1R// + /- OLT PROJECTION + OLT TYPE (19 mm right edge bolt) A/P2L// + /- OLT PROJECTION + OLT TYPE (22 mm left edge bolt) A/P2R// + /- OLT PROJECTION + OLT TYPE (22 mm right edge bolt) Ordering example: A / P 1 L / 0 1 / 3 / - R R Min. Note: fixing hole ø if bezel is used 9

3 SQUARE ACK OLT LOCK FOR CUPOARDS - HORIZONTAL This lock is ideal for use on cupboards. Rotating the key 180º results in horizontal movement of the bolt. The lock fits into a 19.1mm diameter hole from the rear of a panel. Screws then secure the lock from the back. A/PSR Right edge bolt projection Suits panels up to 19 mm thick. Zinc alloy diecast housing and back plate Zinc alloy diecast bolt - horizontal movement Positive click action mechanism Optional bezel - refer to page 101 A/PSL Left edge bolt projection 10,2 40,0 3 right chrome 9,2 mm bolt throw 3,5 35,2 40,0 ø4,2 countersunk hole from other side 2,5 180º clockwise to unlock - left edge bolt 180ºanti-clockwise to unlock - right edge bolt 15,5 - Customer to supply 10,5 A / PSL / / + / A / PSR / / + / Ordering example: A / P S L/ 0 2 / 3 / ,0 Note: fixing holes ø if bezel is used 13

4 SQUARE ACK OLT LOCK FOR DRAWERS - VERTICAL This lock is ideal for use on drawers. Rotating the key 180º results in vertical movement of the bolt. The lock fits into a 19.1mm diameter hole from the rear of a panel. Screws then secure the lock from the back. Suits panels up to 19 mm thick. Zinc alloy diecast housing and back plate Zinc alloy diecast bolt - vertical movement Positive click action mechanism Optional bezel - refer to page 101 A/PSV 35,2 ø4,2 countersunk hole from other side 40,0 40,0 10,2 3,5 3 right chrome 2,5 180º clockwise to unlock - Customer to supply 9,2 mm bolt throw 8,0 10,5 15,5 Note: Fixing holes ø if bezel is used A / PSV / / + / Ordering example: A / P S V/ 0 2 / 3 /

5 PROJECTION OLT LOCK - 42 MM VERTICAL OLT PROJECTION This lock is ideal for use on drawers and doors. It fits through the rear face of the panel, into a hole 22 mm in diameter and 30 mm from the drawer or door edge. Once checked in, the screws secure the lock from the back. Suits panels of up to 42 mm thick. Zinc alloy diecast housing Zinc alloy diecast backplate and bolt (passivated) Vertical bolt operation A/P4V 3 right chrome 180º clockwise to unlock - Customer to supply STEP 1 STEP 2 STEP 3 A / P4V / / + Ordering example: A / P 4 V / 1 8 / 3 /

6 OLT OPTIONS AND EZELS Projection olt Locks OLT TYPE DIMENSION L 11,6 V 19,5 F 21,5 R 28,0 37,3 31,6 37,7 66,6 X 40,5 L 49,5 M 51,5 OLT TYPE OLT TYPE C L L OLT TYPE FX olt out of flat Shown at 70% OLT TYPE RX olt out of round ezels ezels are designed to fit onto the nozzles of our locks. Their main function is to finish off a drilled hole in timber. SIZES (Internal Diameter) - 19 mm - 22 mm - right chrome - Nickel

7 LOCKER AND CUPOARD LOCK 22 MM NOZZLE LENGTH This lock is ideal for use on lockers and cupboards. Rotating the key 360º results in 6.4 mm bolt movement. The lock fits into a 16 mm diameter hole from the rear of a panel. Screws then secure the lock from the back. Suits panels up to 22 mm thick. Zinc alloy diecast housing - natural finish Pressed steel back plate - passivated - back plate held on by two removable screws Zinc alloy diecast bolt - natural finish Zinc alloy diecast barrel - natural finish 6,4 throw A/PN22 43,0 ZL 1800 combinations - master keying 18,3 66,7 O Zinc - 360º clockwise to unlock - - Customer to supply 14,3 22,2 ø6,0 57,2 Min. 38,0 ø15,9 6,4 6,9 A/PN22/ ZL / 0 - / Ordering example: A / P N 2 2 / Z L /0 - /