Page 1-3. Wide selection of flow and pressure Simple to use and train with Fixed flow. Page 1-4

Transcription

1 SELECTOR GUIDE 1-1 VARIABLE selectable selectable AUTOMATIC fixed CAFS FLEX ATTACK Chief SELECT-O-MATIC SELECT-O-FLOW PHANTOM MYSTERY AVAILABLE BASE GPM (LPM) (697) GPM (LPM) ( ) GPM (LPM) ( ) GPM (LPM) (57-757) GPM (LPM) ( ) GPM (LPM) ( ) PRODUCT DESCRIPTION MATERIAL Page 1-3 Page 1-4 Page 1-8 Page 1-13 Quickly switches between wet foam, dry foam, and water without shutting down Unobstructed variable orifice waterway won t strip CAF bubbles Wide selection of flow and pressure Simple to use and train with Fixed flow Simplifies fireground hydraulics Maintains effective flow and stream Automatic flow Firefighter chooses flow and stream Rugged and easy to use Wide flow range/constant flow Page 1-11 Page 1-15 Firefighter chooses flow and stream High flow range/constant flow Rugged all brass versions Original fog nozzle Popular for high-rise packs Variable stream Brass Brass Brass Brass Brass Elk-O-Lite Elk-O-Lite Elk-O-Lite Elk-O-Lite Elk-O-Lite Brass Elk-O-Lite QUICK-KEY KEY: Low Pressure Ball Shut-off Twist Shut-off Rebuild/Retro Electrical Foam Compatible Break-apart U.S.Coast Guard/Navy Approved Underwriters Laboratories Factory Mutual

2 selector guide FIXED FIXED FIXED/VARIABLE SELECTABLE KEY: Select-O-Stream INDUSTRIAL FOG & ELECTRICAL FOG SPECIAL USE BALL SHUT-OFFS, & PLAYPIPES SOLID STRIKE MARINE GPM (LPM) (45-946) 1.0 GPM (LPM) (45-946) GPM (LPM) ( ) 1.0 GPM (LPM) ( ) GPM (LPM) Low Pressure AVAILABLE BASE GPM (LPM) Ball Shut-off IND. Twist Shut-off PRODUCT DESCRIPTION MATERIAL ELE. Rebuild/Retro Page 1-17 Page 1-19 Page 1-21 Page 1-23 Page 1-24 Page 1-31 Convenient detents for stream selection Rugged all brass construction with chrome finish Fixed Flow Durable and simple to use Designed for corrosive conditions For use on Class C fires Narrow to wide fog only Brass construction Designed for corrosive conditions Accepted US Navy Specifications Vary effective tip size as needed from 3/4, 7/8, to 1 Creates a perfect solid stream of water Wide range of flows Smooth bore optional Design your own break-apart Playpipes for easy handling Vary effective tip size as needed from 3/4, 7/8, to 1 Creates a perfect solid stream of water Electrical Foam Compatible Break-apart Brass Brass Brass Brass Brass Brass Elk-O-Lite Elk-O-Lite Elk-O-Lite Elk-O-Lite Elk-O-Lite Elk-O-Lite U.S.Coast Guard/Navy Approved QUICK-KEY Underwriters Laboratories Factory Mutual HANDLINE NOZZLES 1-2

3 flex attack 1-3 Flex Attack TM A nozzle that lets you go from CAF to H 2 0 with a click of the tip. From the wet CAF attack setting, click left for a big open waterway and dry foam or click right for a tight 15 /16 water only smooth bore. The patented, unobstructed variable orifice waterway won t strip CAF bubbles. Features include: Free swivel inlet Hard anodized, Teflon impregnated aluminum alloy body and pistol grip Aluminum/bronze shut-off handle Zytel ST801 polyamide center barrel Ultra high molecular weight polyethylene shut-off seats 70A urethane compressible bore 184 GPM at 50 psi in water setting Maximum operating pressure 200 psi Ultra-reflective color coding Nozzle position indicating lug Patented variable orifice smooth bore 15 /16, 1 1 /8, and 1 3 /8 Dual drive, double seat shut-off with full round metal ball British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available. BASE SIZE 1.5 FLOW RATE* GPM (LPM) 184 (697) 184 (697) * In water setting Patent pending pressure balancing chamber allows nozzle to be adjusted effortlessly under flow pressure PRESSURE* GRIP HANDLE MODEL PSI Pistol (BAR) Grip Tab Horseshoe 50 (3.45) o s FLX-20G 50 (3.45) TFLX-20G (TIP) silver red tab OPTIONS COLORS orange yellow green HANDLES Horseshoe THREADS blue Flex Attack nozzle comes standard with chrome handle and natural Elk-O-Lite pistol grip. Ultrareflective, durable vinyl color coding bands are supplied with each nozzle. See above for colors. All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous.

4 chief TM Chief TM Fixed flow Chief nozzles efficiently deliver a constant gallonage from straight stream to full fog. The simple rugged design makes the Chief easy to use, train with and reliable in tough situations. Superior hydraulics due to a fully machined waterway result in excellent stream quality and reach. The Chief is also available in true low pressure versions with specifically engineered, calibrated and labeled stems down to 50 psi. With more than 300 available variations the Chief is easily customized to meet your specific needs. Aluminum / Bronze shut-off handle with double stops 100 psi, 75 psi or 50 psi models HANDLINE NOZZLES 1-4 Durable color selectable urethane bumper Flush without shut-off Can be field retrofitted to optional flows and pressures Standard spinning teeth, or optional molded urethane teeth pistol grip made from Elk-O-Lite British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

5 chief TM 1-5 BASE SIZE PSI (BAR) AVAILABLE STANDARD FLOW RATE GPM (LPM) 15 (57) 30 (114) 45 (170) 60 (227) 75 (284) 95 (360) 125 (473) 150 (568) 175 (662) 185 (700) 200 (757) 250 (946) 275 (1041) 300 (1136) 325 (1230) 350 (1325) TYPE BREAK- COMPONENTS 50 (3.45) 75 (5.17) NOZZLE s s o s (6.89) 50 (3.45) 75 (5.17) NOZZLE s s o s (6.89) 50 (3.45) 75 (5.17) NOZZLE s s o s (6.89) 50 (3.45) 75 (5.17) TIP s s (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s s o (6.89) 50 (3.45) 75 (5.17) TIP o s s o (6.89) 50 (3.45) s 75 (5.17) TIP s s (6.89) 14HR 2 50 (3.45) 75 (5.17) BREAK B-275A o s o o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s s o (6.89) 50 (3.45) 75 (5.17) BREAK B-275GA o o s o s s o (6.89) 50 (3.45) 75 (5.17) TIP o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o o s s o (6.89) 50 (3.45) 75 (5.17) BREAK B-275GA o o s o s s o (6.89) 50 (3.45) 75 (5.17) TIP o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE o s o s s o (6.89) 50 (3.45) 75 (5.17) TIP o s s o (6.89) 50 (3.45) 75 (5.17) BREAK B-275A o s o o s s o (6.89) 50 (3.45) 75 (5.17) BREAK B-375GAT o s o s s o * (6.89) 50 (3.45) 75 (5.17) BREAK B-375AT o s o s s o * (6.89) See opposite page for Notes. Tip Shut-off* GRIP BASE TYPE SHUT- LENGTH OFF HANDLE TEETH Smooth Bore** Pistol Grip Playpipe Ladderhook Rigid Swivel Free Swivel Long Short Twist Ball Tab Horseshoe Spinning Plastic Molded Urethane Cut Metal Model Figure

6 chief TM BASE SIZE 2.5 PSI (BAR) AVAILABLE STANDARD FLOW RATE GPM (LPM) 15 (57) 30 (114) 45 (170) 60 (227) 75 (284) 95 (360) 125 (473) 150 (568) 175 (662) 185 (700) 200 (757) 250 (946) 275 (1041) 300 (1136) 325 (1230) 350 (1325) TYPE BREAK- COMPONENTS Tip 50 (3.45) 75 (5.17) TIP s s o (6.89) 50 (3.45) 75 (5.17) TIP s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE s o s o o s s o (6.89) 50 (3.45) BREAK- 75 (5.17) B-278L s o s s o (6.89) 50 (3.45) 75 (5.17) NOZZLE o s s o o s s o (6.89) 50 (3.45) BREAK- 75 (5.17) LA s s o (6.89) 50 (3.45) BREAK- 75 (5.17) DB-375GAT s s o o s s o * (6.89) Shut-off* GRIP BASE SHUT- TYPE LENGTH OFF HANDLE TEETH Smooth Bore** Pistol Grip Playpipe Ladderhook Rigid Swivel Free Swivel Long Short Twist Ball Tab Horseshoe Spinning Plastic Molded Urethane Cut Metal Model Figure HANDLINE NOZZLES 1-6 Key s = standard o = option * Break-apart nozzles list standard configuration for shut-offs. ** Listed flow rate for break-apart nozzle with integral smooth bore is for Chief nozzle tip only. Smooth bore discharge size may restrict flow of Chief tip. 15/16 discharge standard on 1.5 base; 7/8, 1, 1 1/8, 1 1/4 available. 1 1/4 discharge standard on 2.5 base; 7/8, 15/16, 1, 1 1/8 available.

7 chief TM chief TM configurations Figure 1 Figure 2 STANDARD (Shown with optional pistol grip) tip only Fig. 1 Fig. 2 tab OPTIONS HANDLES BASES Horseshoe Long short 1-7 Figure 6 Figure 5 Figure 4 Figure 3 break-apart (Shown with optional pistol grip) break-apart with integral smooth bore (Shown with optional pistol grip) Playpipe with nozzle Playpipe with TIP Fig. 3 Fig. 4 Fig. 5 Fig. 6 Figures depict general product types only and are not intended to be inclusive of all product features. black THREADS All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. BREAK- COMPONENTS Ball shut-offs and/or playpipes referenced here may be found on page MOLDED URETHANE TEETH red orange COLORS yellow Glow green additional information Part name Page # Thread Information T-12 Nozzle Flow Data T-2 Hose and Nozzle Accessories 2-1 Foam Expansion Tubes 2-2 blue white Color options available for pistol grip, bumper, and handle. Glow available for bumper only. Retrofit kit available for Glow bumper. White bumper not available. Chief nozzle comes standard with an orange bumper, chrome handle, and natural Elk-O-Lite pistol grip.

8 select-o-matic Select-O-Matic Pressure-regulating Select-O-Matic nozzles automatically adjust to fluctuating water flow to maintain effective pressure and a consistent fire stream in all flow ranges. Our patented, completely unobstructed waterway allows more gpm at lower pressures than any competitive brand. All models flush easily without shutting down and provide constant flow on either fog or straight stream, making them ideal for the application of AFFF foam. Corrosion resistant; no lubrication required. Aluminum/Bronze shut-off, with double stops Durable color selectable urethane bumper 100 psi or 75 psi models HANDLINE NOZZLES 1-8 Flush without shut-off Standard spinning teeth or optional molded urethane teeth 1, 1.5 or 2.5 rigid, swivel or free swivel base pistol grip made from Elk-O-Lite British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

9 select-o-matic 1-9 Base Size FLOW RANGES GPM (LPM) PRESSURE PSI (BAR) TYPE Break-Apart Components Tip Shut-Off* GRIP Smooth Bore ** Pistol Grip Playpipe Ladderhook Rigid Swivel Free Swivel Long Short BASE HANDLE TEETH TYPE LENGTH Tab Horseshoe Spinning Molded NOZZLE o s s o s SM-3F 1 (38-284) 100 (6.89) NOZZLE o s s o s SM-3FG 1 TIP s s TSM-3F 2 NOZZLE o s o o s s o SM-10F 1 NOZZLE o o s o s s o SM-10FG (6.89) NOZZLE o s o o s s o SM-10FB (All Brass) 1 ( ) TIP o s s o TSM-10F 2 BREAK - TSM-10F LB-275A o s o o s s o STSM-10F 3 NOZZLE o s o o s s SM-20FLP 1 NOZZLE o o s o s s SM-20FGLP 1 TIP o s s TSM-20FLP 2 75 (5.17) BREAK- TSM-20FLP B-375AT o s o s s STSM-20FATLP 4 BREAK- TSM-20FLP B-375GAT o s o s s STSM-20FGATLP NOZZLE o s o o s s o SM-20F 1 ( ) NOZZLE o o s o s s o SM-20FG 1 TIP o s s o TSM-20F 2 BREAK- TSM-20F B-275A o s o o s s o STSM-20F (6.89) BREAK- TSM-20F B-275GA o o s o s s o STSM-20FG 3 BREAK- TSM-20F B-375AT o s o s s o STSM-20FAT 4 BREAK- TSM-20F B-375GAT o s o s s o STSM-20FGAT 4 NOZZLE o s o o s s o SM-30FLP 1 NOZZLE o o s o s s o SM-30FGLP 1 TIP o s s o TSM-30FLP 2 75 (5.17) BREAK- TSM-30FLP B-375AT o s o s s o STSM-30FATLP 4 BREAK- TSM-30FLP B-375GAT o s o s s o STSM-30FGATLP NOZZLE o s o o s s o SM-30F 1 ( ) NOZZLE o o s o s s o SM-30FG 1 TIP o s s o TSM-30F 2 BREAK- TSM-30F B-275A o s o o s s o STSM-30F (6.89) BREAK- TSM-30F B-275GA o o s o s s o STSM-30FG 3 BREAK- TSM-30F B-375AT o s o s s o STSM-30FAT 4 BREAK- TSM-30F B-375GAT o s o s s o STSM-30FGAT 4 NOZZLE s o s o o s s o DSM-30FLP 1 NOZZLE o s s o o s s o DSM-30FGLP 1 75 (5.17) BREAK- TSM-30FLP B-278L s s s o STSM-30BPALP 6 BREAK- TSM-30FLP DB-375GAT s s o o s s o STDSM-30FGATLP 4 TIP s s o DTSM-30F 1 NOZZLE o s s o o s s o DSM-30FG 1 BREAK- SM-30F 279LA s o s s o SM-30PL BREAK- TSM-30F B-278L s o s s o STSM-30BPA 6 ( ) NOZZLE s o s o o s s o DSM-30F 1 BREAK- TSM-30F DB-275A s o s o o s s o STDSM-30F (6.89) BREAK- TSM-30F DB-275GA o s s o o s s o STDSM-30FG 3 BREAK- TSM-30F B-275A + s 279LA s o s s o STSM-30PL 6 BREAK- TSM-30F DB-375AT s s o o s s o STDSM-30FAT 4 BREAK- TSM-30F DB-375GAT s s o o s s o STDSM-30FGAT 4 Key s = standard o = option * Break-apart nozzles list standard configuration for shut-offs. ** Listed flow rate for break-apart nozzle with integral smooth bore is for Select-O-Matic nozzle tip only. Smooth bore discharge size may restrict flow of Select-O-Matic tip.15/16 discharge standard on 1.5 base; 7/8, 1, 1 1/8, 1 1/4 available. 1 1/4 discharge standard on 2.5 base; 7/8, 15/16, 1, 1 1/8 available Model Figure

10 Select-o-matic configurations Select-o-matic Figure 1 Figure 2 tip only nozzle (Shown with optional pistol grip) Fig. 1 Fig. 2 Long tab OPTIONS HANDLES BASES Horseshoe short HANDLINE NOZZLES Figure 6 Figure 5 Figure 4 Figure 3 break-apart (Shown with optional pistol grip) break-apart with integral smooth bore (Shown with optional pistol grip) Playpipe with nozzle Playpipe with tip Fig. 3 Fig. 4 Fig. 5 Fig. 6 Figures depict general product types only and are not intended to be inclusive of all product features. black red orange THREADS All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. BREAK- COMPONENTS Ball shut-offs and/or playpipes referenced here may be found on page MOLDED URETHANE TEETH COLORS yellow Glow green blue additional information Part name Page # Thread Information T-12 Nozzle Flow Data T-2 Hose and Nozzle Accessories 2-1 Foam Expansion Tubes 2-2 white Color options available for pistol grip, bumper, and handle. Glow available for bumper only. Retrofit kit available for Glow bumper. White bumper not available. The standard Select-O-Matic nozzle options are a yellow bumper, chrome handle, and natural Elk-O-Lite pistol grip. 1-10

11 phantom 1-11 Phantom The selectable gallonage Phantom lets the firefighter select the appropriate flow. The wide selection range standard with the Phantom makes it one nozzle for every use from brush to interior attack. The Phantom is designed for reliable performance with rugged metal selector ring and dual drive metal ball shut-off. standard in 100 psi and true 75 psi models. Aluminum / Bronze shut-off with double stops 100 and 75 psi 1, 1.5 rigid, swivel, or free swivel base Dual drives Flush without shut-off Metal selector ring Spinning teeth pistol grip made from Elk-O-Lite New 60 GPM (227 LPM) flow rate! British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

12 phantom Base Size FLOW RATE GPM (LPM) PRESSURE PSI (BAR) Key s = standard o = option *Break-apart nozzles list standard configuration for shut-off. TYPE Break-Apart Components Tip Shut-Off* Pistol Grip Rigid Swivel Free Swivel Twist Ball Tab HANDLE TEETH NOZZLE s s s PSFS-HP 1 15/30/45/ (6.89) NOZZLE s s s PSFS-HPG 1 (57/114/170/227) TIP s s TPSFS-HP 2 TIP s s TPSFS-HPT 2 NOZZLE s o o s s SFM-HP (6.89) NOZZLE o s o s s SFM-HPG 1 TIP s s TSFM-HP 2 TIP s s TSFM-HPT 2 30/60/95/125/150/200 NOZZLE s o o s s SFM-LP 1 (114/227/360/473/568/757) NOZZLE o s o s s SFM-LPG 1 BREAK- 75 (5.17) TSFM-LP B-275-A o s o o s STSFM-LP TIP s s TSFM-LP 2 TIP s s TSFM-LPT 2 GRIP BASE SHUT- OFF Horseshoe 1-12 black red orange yellow Glow green blue white Spinning Model Figure PHANTOM configurations OPTIONS COLORS Figure 1 STANDARD (Shown with optional pistol grip) Color options available for pistol grip, bumper, and handle. White bumper not available. Phantom nozzle standards are a black bumper, rough chrome handle, and natural Elk-O-Lite pistol grip. tab HANDLES Horseshoe Fig.1 Figure 2 TIP ONLY Fig. 2 Figures depict general product types only and are not intended to be inclusive of all product features. THREADS All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. METRIC When ordering the metric version of a 1 Phantom nozzle, the flow rate will be set and labeled at 60/120/180/240 LPM (15/32/47/64 gpm). BREAK- COMPONENTS Ball shut-offs and/or playpipes referenced here may be found on page 1-24.

13 select-o-flow 1-13 Select-O-Flow Select-O-Flow, the original selectable gallonage nozzle, is similar in function to the Phantom allowing the firefighter to select the appropriate flow. The Select-O-Flow range goes as high as 250 gpm. Metal shut-off Locking flow selector ring Heavy duty rubber bumper Flush without shutting down High flow range pistol grip, rugged cast brass construction with rough chrome finish British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

14 select-o-flow Base Size 1.5 FLOW RATE GPM (LPM) PSI (BAR) 100 (6.89) 40/60/95/125 (151/227/360/473) 125/175/250 (473/662/946) Break-Apart Components Tip Shut-Off* Pistol Grip GRIP SHUT-OFF HANDLE BASE TEETH DIMENSIONS Playpipe Ladderhook Twist Ball Tab Horseshoe Rigid Swivel Free Swivel Molded Urethane Spinning Rigid Metal o s s o o s SFL-B (Brass) 4 o s s o s SFL-BG (Brass) 1 s o s o s SFL-O 4 s o o s s SFL-OG 1 Length (Inches) Weight (Lbs.) s s s s Model Figure TSFL-O 2 (Tip Only) TSF 2 (Tip Only) s o s o s SF 4 s o o s s SF-G /175/ 250 (473/662/946) s o s o s DSF 4 s o o s s DSF-G 1 TSF DB-275A s o s o s STDSF SF 279-L s o o s s SF TSF B-278-L s o o s s STSFB-800A 3 Key s = standard o = option *Break-apart nozzles list standard configurations for shut-offs. SELECT-O-FLOw Configurations pistol grip playpipe tab OPTIONS HANDLES Horseshoe Figure 1 Figure 3 SFL-B, SFL-BG, SFL-O, SFL-OG all feature aluminum/bronze shut-off handles DSF, DSFG, SF, SF-G, STDSF, SF-800 all feature mangenese/bronze shut-off handles Fig. 1 Fig. 3 MOLDED URETHANE TEETH tip only nozzle Figure 2 Figure 4 THREADS All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. BREAK- COMPONENTS Fig. 2 Fig. 4 Ball shut-offs and/or playpipes referenced here may be found on page Figures depict general product types only and are not intended to be inclusive of all product features.

15 Mystery 1-15 Mystery The Mystery Nozzle incorporates a twist-type shut-off, opening in straight stream and producing a flow from straight stream to wide fog. In combination with a B-375A ball shut-off, the Mystery Nozzle promotes an extremely convenient method of advancing hoselines. Simply close the ball shut-off, remove the Mystery tip, attach additional hose, and then reattach the tip at the end of the line. The tip s built-in shut-off allow for the line to be advanced rapidly without bringing in an additional nozzle. 100 psi, 75 psi or 50 psi Elk-O-Lite Construction Can be field-retrofitted to optional gpm pressure Cut metal teeth Twist shut-off standard Heavy duty rubber bumper 1.5 or 2.5 rigid connection British Standard Parallel Pipe (BSPP) base options available.

16 Mystery Base Size AVAILABLE STANDARD FLOW RATE GPM (LPM) 60 (227) 95 (360) 125 (473) 170 (644) PSI (BAR) 200 (757) 250 (946) 100 (6.89) 100 (6.89) 75 (5.17) 100 (6.89) 100 (6.89) 50 (3.45) 75 (5.17) 100 (6.89) Break-Apart Components Tip Shut-Off* Smooth Bore** GRIP Pistol Grip SHUT- OFF Twist Ball HANDLE s s L-205-BA (Tip Only) 1 L-205-BA LB-275A o s o s o s LB-275-AF 2 Tab s o s BA (Tip Only) BA B-375AT o s o s o s B-375-ATF BA B-375GAT o s o s s B-375-GATF 3 s s D-205-BA (Tip Only) 1 D-205BA JB-275A s s s JB-275-LAFD 4 Horseshoe BASE Rigid Swivel Free Swivel TEETH DIMENSIONS Cut Metal Length (Inches) Weight (Lbs.) Model Figure 1-16 Key s = standard o = option * Break-apart nozzles list standard configuration for shut-offs. ** Listed flow rate for break-apart nozzle with integral smooth bore is for Mystery nozzle tip only. Smooth bore discharge size may restrict flow of Mystery tip. 15/16 discharge standard on 1.5 base; 7/8, 1, 1 1/8, 1 1/4 available. 1 1/4 discharge standard on 2.5 base; 7/8, 15/16, 1, 1 1/8 available. MYSTERY configurations OPTIONS Figure 1 TIP ONLY Fig. 1 Figure 3 break-apart with integral smooth bore (Shown with optional pistol grip) Fig. 3 tab HANDLES Horseshoe THREADS Figure 2 BREAK- Fig. 2 Figure 4 LAFD NOZZLE Fig. 4 All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. BREAK- COMPONENTS Ball shut-offs and/or playpipes referenced here may be found on page Figures depict general product types only and are not intended to be inclusive of all product features.

17 select-o-stream Select-O-Stream An industry standard for over 40 years, the Select-O-Stream delivers constant gallonage at every pattern level, from straight stream to full fog. The rugged all brass construction with chrome finish has a proven record of standing up to corrosive conditions. The variety of available gpm options with the Select-O-Stream allows for customized choices to match the needs of fire professionals. Manganese/ Bronze shutoff handle with double stops 1-17 Adjustable teflon impregnated neoprene seat with hydraulically balanced acetal ball Heavy duty rubber bumper pistol grip, rugged cast brass construction with rough chrome finish British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

18 select-o-stream Base Size AVAILABLE STANDARD FLOW RATES GPM (LPM) 12 (45) 23 (87) 60 (227) 95 (360) 125 (473) 170 (644) 250 (946) PSI (BAR) 100 (6.89) Break-Apart Components Tip Shut-Off* Pistol Grip GRIP Playpipe FINISH Satin Brass Chrome-Plated HANDLE s s o o s s S-O 1 s s o s s S-OG 2 Tab s o o s o s o s L-O 1 s o o s s s L-OG 2 Horseshoe s o s o s o s SOS 1 Rigid BASE Swivel Free Swivel TEETH Cut Metal DIMENSIONS Length (Inches) Weight (Lbs.) Model Figure 2.5 s o s o s o s D 1 SOS 279-L s o s s s SOS Key s = standard o = option * Break-apart nozzles list standard configuration for shut-off. SELECT-O-STREAM configurations Figure 1 STANDARD Fig. 1 OPTIONS Figure 2 PISTOL GRIP tab HANDLES Horseshoe Fig. 2 THREADS Figure 3 PLAYPIPE COMBINATION Fig. 3 All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. BREAK- COMPONENTS Ball shut-offs and/or playpipes referenced here may be found on page Figures depict general product types only and are not intended to be inclusive of all product features.

19 industrial & electrical fog Industrial & Electrical Fog Our industrial fog nozzles were created to handle the rigors of industrial needs in refineries, chemical plants, office complexes and other on-site situations. Several different materials are available to suit every need, and most nozzles are U.L. listed and/or FM approved. The fog nozzles with the electrical specification in the chart are designed to be used on class C hazards and utilize only fog capabilities in combating blazes at 10 or more from live electrical equipment and/or circuits with voltage up to 250,000. All other industrial fog nozzles can be used in either straight stream or fog combinations British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

20 industrial & electrical fog Base Size AVAILABLE STANDARD FLOW RATES GPM (LPM) 12 (45) 23 (87) 60 (227) 75 (284) 95 (360) 125 (473) PSI (Bar) 100 (6.89) 170 (644) 250 (946) FLOW TYPE Fixed Flow Variable Flow SHUT-OFF Twist Ball Electrical CERT. FM Approved U.L. Listed Rigid BASE Swivel Free Swivel Satin MATERIAL / FINISH Chrome Polycarbonate Elk-O-Lite DIMENSIONS s s o S-205-B 1 s s o L-205-B 3 s s o L s s Brass s s o B 6 s s o L-205-EB 3 s s o L-206-T Length (Inches) Weight (Lbs.) Model Figure 2.5 s s E 4 o s o s o L-OE s s NSL 5 s s o EB 3 s s o D-205-B 6 s s o D o s o s o D-E s s o D-205-EB Key s = standard o = option fog nozzle configurations Figure 1 Fig. 1 Figure 2 Fig. 2 Figure 3 Figure 5 Fig. 3 Fig. 5 Figure 4 Figure 6 Fig. 4 Fig. 6 OPTIONS THREADS All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. HANDLES L-OE/NSL feature aluminum/bronze shut-off handles. Figures depict general product types only and are not intended to be inclusive of all product features.

21 marine Marine These are specifically designed and manufactured for the unique firefighting challenges of a marine environment. They utilize military spec, corrosion resistant cast brass construction and are ideal for the application of AFFF. The constant flow technology, combined with their durable construction, make them optimal for use in the shipping industry, in refineries and for off-shore drilling or production rigs, as well as within chemical complexes. Most models meet the stringent performance requirements of the U.S. Navy. Manganese/Bronze horseshoe handle 1-21 Flush without shutting down Acetal ball with self-adjusting UHMWPE seat (most models) Marine Brass construction Cut metal teeth pistol grip is brass British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

22 marine Base Size 1.5 AVAILABLE FLOW RATE GPM (LPM) 95 (360) 125 (473) 250 (946) PSI (BAR) 100 (6.89) GRIP Pistol Grip SHUT-OFF Twist Ball Rigid BASE TEETH RATING DIMENSIONS Swivel Free Swivel Cut Metal Complies with MIL* Complies with USCG** FM Approved s s SFL-N 1 s s SFL-GN-95 2 s s SFL-GN s s SFL-GN-95-SPL 2 Length (Inches) Weight (Lbs.) Model Figure s s SFL-GCG-95 2 s s SFL-CG s s DSF-N 3 Key s = standard o = option * Complies with MIL-N-24408E Type 1 ** Complies with USCG Approval Number: /12/0-IAW CFR MARINE configurations Figure 3 Figure 2 Figure 1 STANDARD Fig. 1 PISTOL GRIP Fig. 2 DSF-N Fig. 3 OPTIONS THREADS All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. HANDLES SFL-N feature manganese/bronze shut-off handles SFL-CG-95, SFL-GCG-95, SFL-GN series, and DSF-N feature silicon/bronze shut-off handles Figures depict general product types only and are not intended to be inclusive of all product features.

23 HANDLINE NOZZLES SOLID STRIKE HANDLINE NOZZLES 1-23 Solid Strike TM The Solid Strike offers unsurpassed flow performance with flexibility that allows the nozzleman to vary GPM or reach without shutting down to change tip size. Unlike a traditional smooth bore tip, the Solid Strike utilizes the hydraulic forces of the water flow itself to converge and project a perfect solid stream of water at near identical exit velocity maximizing the stable range of the stream. The Solid Strike operates like any traditional smooth bore tip on a shut-off, except that the nozzleman has the ability to vary the effective tip size under flow. Features include: Dual construction free swivel/swivel for superior inlet movement and rotation Hard anodized, Teflon impregnated aluminum alloy body and pistol grip Aluminum/bronze shut-off handle Delrin adjustable hydrofoil Maximum operating pressure 200 psi Tactile detents at flow setting equivalents to 3/4, 7/8, and 1 smooth bore Ultra-reflective color coding Integrated stream shaper Dual drive shut-off OPTIONS COLORS British Standard Parallel Pipe (BSPP) base options available. Inlet Size 1.5 Outlet Size 1.5 FLOW RATES* GPM (LPM) 118/159/209 (447/602/791) Handle Horseshoe Twist-and-click tip exposes leader thread to extend the hose line Model * Flow rate for each detent (3/4, 7/8, and 1 ) 50 psi (3.45 bar) s SS-475-GAAT silver red orange yellow THREADS green All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. blue Solid Strike nozzle comes standard with chrome handle and natural Elk-O-Lite pistol grip. Ultra-reflective, durable vinyl color coding bands are supplied with each nozzle. See above for colors.

24 BALL SHUT-OFFS & PLAYPIPES Ball Shut-offs & Playpipes Elkhart Brass Ball Shut-offs and Playpipes are designed and constructed for rugged use and reliable performance as well as an excellent foundation for your break-apart nozzle needs using either smooth bore or fog nozzles. Elkhart Brass Ball Shut-offs and Playpipes are available with a variety of options, including built-in smooth bores which can be used with a fog nozzle tip for maximum versatility. HANDLINE NOZZLES Choice of ball , 1.5 or 2.5 Metal with pistol grip British Standard Parallel Pipe (BSPP) and British Instantaneous (BS336) base options available.

25 ball shut-offs & playpipes 1-25 Ball Shut-offs & Playpipes Inlet Size Outlet Size WATERWAY SIZE /8 1 1 /2 1 3 /4 AVAILABLE INTEGRAL SMOOTH BORE DISCHARGE SIZE 1 /2 Key s = standard o = option *B-278 (without ladderhook) + ST-190-BA (Triple Stack Tip) 7 /8 15 / /8 1 1 /4 BALL TYPES Single Cutaway Double Cutaway Full Round Single Adjustable SEAT DRIVE grip BASE HANDLE Double Non-Adjustable TYPE LENGTH Single Double Pistol Grip Playpipe Ladderhook Rigid Swivel Free Swivel Long Short Tab Horseshoe MATERIAL s s o s o SB s o s s o SB-275-A 2 s o s s o SB-275-AT 1 s o s s o SB-275-G 2 s o s s o SB-275-GA 2 s o s s o SB-275-GAT 1 s o s o o s LB s o s o o s LB-275-A 2 s o o s o s LB-275-GA 2 s o s o o s B s o s o o s B-275-A 2 s o o s o s B-275-GA 2 s o o o s o s B-375-A 2 s o o o s o s B-375-AT 1 s o o o s o s B-375-GA 2 s o o o s o s B-375-GAT 1 s o s o o s DB-275 s o s o s o o s DB-275-A s o o s s o o s DB-275-GA s o o s s o o s DB-375-A s o o s s o o s DB-375-GA s o o s s o o s DB-375-AT s o o s s o o s DB-375-GAT s s s B s s s B-278-AT 4 s s s B-278-L 4 s s s B-877-A* s s 279-L 3 s 279-LA 3 s 211T s s s JB-275 s s s JB-275-A s s s JB-275-GA Brass Elk-O-Lite Model Figure

26 ball shut-offs & playpipes ball shut-offs and playpipes configurations Figure 1 Figure 2 integral smooth bore (Shown with optional pistol grip) Fig. 1 typical ball shut-off (Shown with optional pistol grip) Double Cut-Away Ball is hydraulically balanced for a smooth transition from closed to open and open to closed. Full Round Ball has a solid bore for optimal flow characteristics and stream quality particularly for smooth bores and shutoffs with built-in smooth bores. Single Cut-Away Combines the features of smooth operation and excellent stream quality. HANDLINE NOZZLES 1-26 Fig. 2 playpipe without shut-off OPTIONS COLORS Figure 3 black red orange yellow Glow green blue white Fig. 3 Color options available for pistol grip and handle. Ball shut-offs standards are a rough chrome handle and natural Elk-O-Lite pistol grip. playpipe with shut-off tab HANDLES Horseshoe Figure 4 THREADS Fig. 4 All nozzles are NHT unless otherwise specified. See index T-12 for optional base threads, including British instantaneous. Figures depict general product types only and are not intended to be inclusive of all product features.

27 stream shapers Stream Shapers Used to straighten a water flow, Elkhart Brass has stream shapers available in a variety of sizes and several materials to suit a variety of situations. Our new mini stream shapers reduce bulk while still providing excellent stream. Most Elkhart stream shapers feature replaceable vanes for easy repair. Choice of materials 1-27 British Standard Parallel Pipe (BSPP) base options available. Stream shapers configurations Figure 1 Figure 5 Figure 4 Figure 3 Figure 2 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Figures depict general product types only and are not intended to be inclusive of all product features. Inlet Size Outlet Size Satin MATERIAL/FINISH BRASS Chrome Elk-O-Lite Key s = standard o = option DIMENSIONS Length (Inches) Weight (Lbs.) Model s A 1 s A-Mini 5 s o B 2 s A 1 s A-Mini 5 s o B 3 s A 3 s o B 4 Figure s A 4 s A 4 OPTIONS THREADS All shapers are NHT unless otherwise specified. See index T-12 for optional base threads.

28 Smooth Bore & DELUGE tips Smooth Bore & DelugeTips For maximum reach, smooth bore tips create concentrated waterflow for use with either handlines or monitors while using lower pressures of 50 or 80 psi. Elkhart offers a wide variety of discharge sizes to suit any need. Additionally, Elkhart s stacked tips allow you to customize the smooth bore to meet your needs in the field. HANDLINE NOZZLES 1-28

29 smooth bore & deluge tips SMOOTH BORE SINGLE TIP 1-29 Base Size / 8 1 /4 5 /16 3 /8 1 /2 5 /8 Key s = standard o = option SMOOTH BORE STACKED TIP 11 /16 AVAILABLE DISCHARGE DIAMETER 3 /4 7 /8 50 PSI 15 / / /8 1 1 /4 1 3 /8 1 1 /2 1 5 /8 1 3 /4 1 7 / /4 2 1 / PSI Brass FINISH Chrome Elk-O-Lite Slug w/bumper DIMENSIONS s o S-185B s A 2 s o B 3 s A 1 s A 4 s A 5 s CAF 6 s o s A s o s A 8 Length (Inches) Weight (Lbs.) Model Figure AVAILABLE 1ST DISCHARGE AVAILABLE 2ND DISCHARGE AVAILABLE 3RD DISCHARGE AVAIL. 4TH DIS- CHARGE FINISH DIMENSIONS Base Size 3/ / /8 1 1 /4 1 1 /2 1 3 / /2 GPM 50 PSI GPM 80 PSI /2 5/ /8 1 1 /4 1 1 /2 1 3 /4 2 1 /4 3 / /8 1 3 /8 1 1 / GPM 50 PSI GPM 80 PSI GPM 50 PSI GPM 80 PSI /8 GPM 80 PSI 500 Brass Chrome Elk-O-Lite Leader Threading* Length (Inches) Weight (Lbs.) Model Figure * 1.5 male for line extension THREADS OPTIONS All base threads are NHT unless otherwise specified. See index T-12 for optional base threads. s s s o o s s s s s s s ST-195 PRESSURE ST-185A ST-185A-IFD ST-190B ST-190BA ST-191 ST ST-191A ST-197A ST-194 All pressure specified for smooth bores at pitot pressure

30 smooth bore & deluge tips Figure 1 Figure 2 SLUG 186-A Leader threading SINGLE SMOOTH BORE TIPS HANDLINE Fig A Leader threading Bumper Fig. 2 Figure 7 Figure 8 SINGLE SMOOTH BORE TIPS DELUGE 181 Classic deluge tip 181-3A Built-in stream shaper Fig. 7 Fig. 8 STACKED SMOOTH BORE TIPS HANDLINE HANDLINE NOZZLES Figure B Bumper Figure 9 ST-185-A 1-30 Fig. 3 Fig. 9 Figure 4 Figure A More compact than other tips 188-A Longer tip for improved stream quality Bumper Fig. 5 SINGLE SMOOTH BORE TIPS HANDLINE/DELUGE Fig. 4 Figure 10 Figure 11 STACKED SMOOTH BORE TIPS MASTER STREAM ST-194 Leader threading ST-195 Leader threading Fig. 10 Fig. 11 Figure CAF For applying CAF Fig. 6 Figure 12 ST-197-A Leader threading Fig. 12

31 special use 1-31 S-205-BAF For forestry use 1.0 rigid base in NHT or NPSH; 0.75 GHT available in 12 or 23 gpm (45 or 87 lpm) Twist shut-off For use with pressure of up to 600 psi (41.37 bar) Straight stream to fog Elk-O-Lite construction L-205-BAF For forestry use 1.5 rigid base Dual flows: 20 and 70 gpm (76 and psi (6.89 bar) Straight stream to fog Twist shut-off Elk-O-Lite construction S-205-BAD For decontamination use Connects to 0.75 GHT or 1 NHT in 12 or 23 gpm (45 or 87 lpm) For use with pressure of up to 600 psi (41.37 bar) Twist shut-off Straight stream to fog Elk-O-Lite construction Optional kit includes: NFPA 1961 compliant 1 hose with adapters (0.75 garden hose, 1 NHT, and 2.5 NHT) plus a heavy-duty nylon bag SFL-O-DI For de-icing use 1.5 swivel base (optional rigid and free swivel bases) Selectable flow rates of 40, 60, 95 or 125 gpm (151, 227, 360 or 473 lpm) Aluminum/bronze handle construction; tab handle (standard), horseshoe handle (optional) Combined chrome-plate brass and Elk-O-Lite construction Usable with de-icing and anti-icing fluids in Type I systems Pistol grip available (SFL-OG-DI)

32 special use SFS-O-DI For de-icing use 1.0 NPSH free swivel base (optional rigid base) Selectable flow rates of 10, 20 or 30 gpm (38, 78 or psi (6.89 bar) Aluminum/bronze handle construction; tab handle (standard), horseshoe handle (optional) Combined chrome-plated brass and Elk-O-Lite construction Usable with de-icing and anti-icing fluids in Type I systems Pistol grip available (SFS-OG-DI) Wat-R-Wall 1.5 free swivel inlet, no outlet 100 gpm ( psi (6.89 bar) Brass construction with chrome plating Length: 8 Width: 10 Height: 7.25 Weight: 8 lbs. HANDLINE NOZZLES Wat-R-Wall 2.5 free swivel inlet, 2.5 outlet with cap and chain 100 gpm ( psi (6.89 bar) Brass construction with chrome plating Length: 8.25 Width: 10 Height: 8.25 Weight: 11.5 lbs. 199 For sewer use 2.5 free swivel base 275 gpm ( psi (6.89 bar) Brass construction Includes a replaceable steel cutting blade tool 184 For street cleaning/flushing use 2.5 NPSH base 300 gpm ( psi (6.89 bar) Brass construction in right, left or center mounting (specify)

33 CELLAR / DISTRIBUTOR 1-33 CELLAR NOZZLE BRESNAN DISTRIBUTOR NOZZLE MODELS MODELS specifications lr r Base 100 PSI (6.89 BAR) Spray Diameter (Fog pattern) Materials/Finish 1.5 F 160 GPM (606 LPM) 2.5 F 350 GPM (1325 LPM) 20 Feet 55 Feet Brass with chrome finish specifications Base 100 PSI (6.89 BAR) Spray Diameter (Fog pattern) Materials/Finish 1.5 F 140 GPM (530 LPM) 20 Feet 2.5 F 395 GPM (1495 LPM) 45 Feet Brass with chrome finish 2.5 F 495 GPM (1874 LPM) 36 Feet BRESNAN DISTRIBUTOR NOZZLE MODELS specifications A-1.5 A APPLICATOR FOR CELLAR/BRESNAN NOZZLE Inlet Outlet Shut-off Materials/Finish 1.5 Free Swivel 1.5 Yes Brass with chrome-plated finish 2.5 Free Swivel 2.5 No Elk-O-Lite with red urethane enamel and anodized trim

34 ACCESSORIES HOSE & NOZZLE ACCESSORIES PISTOL GRIP ADAPTER For use with 1.5, 1.75 or 2 Elk-O-Lite construction with hard anodized finish PG-S (1 free swivel inlet and waterway with 1 male outlet) PG (1.5 free swivel inlet and waterway with 1.5 female outlet) PIEZOMETER GAUGE Liquid-filled psi gauge Elk-O-Lite construction with hard anodized finish 227A 1.5 (1.5 swivel inlet, 1.5 outlet, and 4.8 length) 227A 2.5 (2.5 swivel inlet, 2.5 outlet, and 5.5 length) 227A 3.5 (3.5 swivel inlet, 3.5 outlet, and 6.9 length) LINE GAUGE Fully guarded, shock resistant luminescent gauge Hard anodized Elk-O-Lite body 228A gauge with 1.5 free swivel inlet, 1.5 outlet, and 6 length 228A gauge with 2.5 free swivel inlet, 2.5 outlet, color-coded zones, and 6.9 length ACCESSORIES HOSE AND LADDER STRAP Flexible woven nylon with brass ends Fits ladder rungs up to 1 5 /8 Strap width 1 Length: 42 Less than 2 lbs. DIRECT CONNECT ADAPTER 2.5 inlet 1.5 outlet Rigid base D-327 (Brass construction) D-327A (Elk-O-Lite construction) EB-500 PORTABLE FLOWMETER Digital gpm read-out display Flowmeter and flowtube-mounted paddlewheel flow sensor Low and high flow warnings Weather-tight PVC Pelican case includes: flowmeter, power switch, low battery indicator, rechargeable battery, AC charger/power supply, cable connections and cord storage space Weight: 17 lbs. Finish is hard anodized 2.5 flow tube (NST threads) 285 HOSE CLAMP For use with hose, including double jacket 3 Unique jaw design allows for safer release of clamped hose Spring-loaded safety lock for closed position Detachable carrying handle ZA-27 aluminum construction Weight: 19 lbs. Length: MB optional Elk-O-Lite mounting bracket can be positioned vertically or horizontally

35 ACCESSORIES FOAM EXPANSION TUBES ACCESSORIES Foam Expansion Tubes When greater expansion rates of foam solution are needed, a foam aeration tube can be quickly attached to many of Elkhart Brass combination fog nozzles. All tubes are Elk-O-Lite cast finish with a nylon cord wrap. 2-2 FOAM EXPANSION TUBE MODELS TUBE configurations Compatible Nozzle Model 246-S 247-S SM-10F/G TSM-10F SM-20F/G TSM-20F thru thru /34/35 SFL-B/G SFL-G/CGC/GN/N SFM/G TSFM DSM-30F/G SM-30F/G TSM-30F SFM-HP/G TSFM-HP/T SFM-LP/G TSFM-LP/T Foam Expansion Tube Details Length Weight (Lbs.) Built-In Hydroverter Figure Figure 3 Figure 2 Figure 1 short Long 244 Fig. 1 Fig. 2 Fig. 3

36 accessories Elkhart brass special tools SEAT WRENCH For seat adjustment and/or removal 1 or 1.5 nozzle/ball shut-off 1 waterway compatible Seat Wrench For seat adjustment and/or removal 1.75, 2 or 2.5 nozzle/ball shut-off waterway compatible accessories Seat wrench Specially designed to be used for seat removal/installation on 9786 or 9787 PIV 4.5 outlet compatible ( ) 5 or 6 outlet compatible ( ) Wye Seat wrench For seat adjustment and/or removal on 1.5 ball valved wyes Hex end fits old style B-100, B-100L and BG-104 Blade end fits old style B-100A, B-100-LA and BG-104A Stem web wrench Designed to hold the stem web (base) while removing and/or installing Master Stream heads Slotted end fits Select-O-Stream, Select-O-Flow, and Mystery stem bases Stem Web Wrench Designed to hold stem web (base) while removing and/or installing handline nozzle stem heads Slotted end fits most of Elkhart s handline nozzle bases (except Select-O-Matics ) Open face 2 Spanner wrench Seat adjustments and/or removal on 800 series and 2800 series apparatus valves Seat adjustments and/or removal on Elkhart s wyes, Siamese and water thiefs (2.5 seat only) Removal and/or installation of stem heads on all Select-O-Matic OPEN face 4 spanner wrench Removal and/or installation of stem heads on Master Stream nozzles (except X-Stream series) Larger version of P/N Stem head wrench Designed to assist in removing and/or installing slotted stem heads Blade end fits slotted handline nozzle stems (except Select-O-Matics ) 603 tool kit Seat wrenches ( and ) Open faced spanner wrench ( ) Stem head wrenches ( and ) Wye seat wrench ( )

37 ACCESSORIES wrenches ACCESSORIES 2-4 F-464 folding spanner One end is a spanner, the other is a window jimmy Fits up to a 3.5 rocker/lug pin coupling Clip ring Length: 10.4 (open) or 5.9 (folded) F-464A Elk-O-Lite construction (weight: 0.4 lbs.) F-464B Brass construction (weight: 1.1 lbs.) T-464 universal spanner Hammer head, window jimmy, gas cock slot, and hanger loop Fits up to a 3.5 rocker/lug pin coupling Elk-O-Lite construction Length: 11.5 Weight: 0.5 lbs. 454 ADjustable hydrant wrench Cast manganese bronze head with stainless steel handle Adjustable fits up to 1.75 pentagon nut or 1.5 square nut Can be used as a spanner on 2.5 pin lug couplings Knurled handle Length: 18.0 Weight: 3.8 lbs. S-454 ADjustable hydrant wrench Cast manganese bronze head with stainless steel handle Adjustable fits up to 1.75 pentagon nut or 1.5 square nut Can be used as a spanner on 2.5 pin lug couplings or rocker lug couplings from 2.5 to 5.0 Knurled handle Length: 16.8 Weight: 4.6 lbs.

38 ACCESSORIES wrenches S-454-S ADjustable hydrant wrench Cast manganese bronze head with stainless steel handle Adjustable fits up to 1.75 pentagon nut or 1.5 square nut Can be used as a spanner on 4.0 or 5.0 Storz couplings or rocker lug couplings from 2.5 to 5.0 Knurled handle Length: 17.3 Weight: 4.9 lbs. ACCESSORIES 469 Spanner Wrench holder Mounts vertically or horizontally on apparatus Holds two T-464 universal spanners Snap action release Elk-O-Lite construction Length: 7.4 Weight: 1 lbs. Optional with wrenches HYDRANT AND SPANNER WRENCH HOLDER Mounts vertically or horizontally on apparatus Holds two T-464 universal spanners plus one hydrant wrench (454, S-454, or S-454-S) Snap action release Elk-O-Lite construction Length: 10.0 Weight: 1.5 lbs. Optional with wrenches

39 elkhart brass innovation from the start elkhart brass 2-6 Elkhart Brass History 1902 Company founded by Albert E. Hansen 1920s 1930s 1940s 1950s 1970s 1980s 1990s 2000s 2010s Offered first ball-type shut-off nozzle in the U.S. Mystery nozzle, America s first peripheral jet fog nozzle Developed a line of truck-mount deck guns Began making portable monitors Added the integral ball shut-off to the Mystery nozzle in the Select-O-Stream line Developed Select-O-Flow nozzles, the industry s first constant flow, selectable gallonage nozzles Introduced Select-O-Matic automatic nozzles, the first nozzles to operate on the availability of water rather than on pressure (still the company s best selling product) Opened an additional manufacturing site in Shreve, Ohio Introduced Chief nozzles a lightweight, simplified version of the Select-O-Flow line Created a complete line of fireground appliances used with LDH Developed Stinger monitors the first product with quick disconnect to move from truck mount to ground mount (prior to Stinger, two separate pieces of equipment were needed) Developed a new generation of easier-to-operate Select-O-Matic nozzles with more gallonage choices Introduced X-Stream SM-2000 Select-O-Matic nozzle with gallonages from GPM Changed the face of firefighting again with W.E.T. (Wireless Electronic Technology) that allows remote controlled operation of monitors from up to 1/4 mile away Introduced Extender which automatically raises Elkhart Brass compact monitors 18 above apparatus deck Introduced the Vulcan monitor, the industry s most compact, lightest master stream device with flows up to 1250 GPM Developed low pressure, including break-apart options, all offering outstanding stream performance at 75 psi (and in some cases, 50 psi) in the Chief, Phantom, and Select-O-Matic lines Introduced RA.M. Rapid Attack Monitor for quick deployment and easy one-man operation Put on the market the Unibody Valve line, featuring a cross-compatible apparatus ball valve and a butterfly valve with a robust, heavy-duty motor Developed the Glow Bumper for to better enhance firefighter safety Revolutionized the market with the Plug-and-Play EXM operating system, starting with the Sidewinder EXM (700 GPM) monitor. The EXM family has since expanded to the Scorpion EXM, Sidewinder EXM UHP (Ultra High Pressure), and the Cobra EXM. Expanded the electric valve controller line of products by developing smaller, CAN enabled, surface-mount valve controllers: UBEC 1S & UBEC 1C. Developed the 1.0 and 1.5 Single Body valves to expand the existing Unibody line of valves.