Version /26/09

Transcription

1 Version /26/09

2 Documen Date Comments Sections t Version Redesigned manual to be consistent with Triner Scale All format Redesigned Cover page image and Keyboard and Display Description image. Cover Page, Keyboard and Display Description /27/08 Updated manual with new rates and services for the Cover Page, Function 08 rate change and the manual cover /26/09 Updated manual with Country Codes for the 09 rate change and the manual cover. Keys, Numeric Keys Cover Page, Country Codes 2006 Triner Scale & Mfg. Co., Inc Contents subject to change without notice. Triner Scale & Mfg. Co., Inc 8411 Hacks Cross Road Olive Branch, MS (662) (800) Fax (662) info@trinerscale.com

3 Triner Scale and Mfg. Co., All rights reserved. The information contained herein is the property of Triner Scale and is supplied without liability for errors or omissions. No part may be reproduced or used except as authorized by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied. Contents subject to change without notice. THIS EQUIPMENT CONTAINS NO USER SERVICEABLE COMPONENTS. Servicing of the equipment must only be carried out by trained and authorized personnel. Use only the AC adapter supplied with the scale. Other adapters may cause damage. Routine maintenance Harsh abrasives, solvents, scouring cleaners and alkaline cleaning solutions should not be used; especially on the display window. The outside of the product may be wiped down with a clean cloth, moistened with water containing a small amount of soap. Installation - Ensure that the scale is placed securely on a flat and level surface. - Avoid installing the scale in areas of direct sunlight and high humidity. Also avoid drafts, vibrations and dusty conditions. - Do not mix the type of batteries. Replace all batteries at the same time. - If the scale is not to be used for a long period of time, remove all batteries from the battery compartment to avoid leakage, which may cause damage to the instrument. - To extend the life of your digital scale, do not drop items to be weighed onto the platform or overload the scale beyond its rated capacity. Shock loading and overloading may damage the load cell and void the warranty. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. 1

4 CE logo here somewhere Getting Started 1. After removing scale from carton, pull out the cardboard protection that is located between the platter and the scale enclosure. Do not remove the platter simply pull out the cardboard protection and discard. 2. Plug the supplied AC Adapter into the scale first, then into an AC outlet. For portable operation, install 6-AA size alkaline batteries (not included) into the battery compartment located underneath the scale. To install batteries, remove the compartment cover on the underside of the scale, fit the 6 AA batteries in the spaces provided (observe polarity markings) and re-engage the cover clips. 3. Place the scale on a stable and firm table. 4. Press the ON (9) key to begin the initialization. Push clips and pull to Remove compartment cover Observe battery polarity (+/-) Initialization When the scale is switched ON for the first time, the scale will display some information and then prompt you for the origination ZIP Code. Your origination ZIP code is the ZIP code from which you will mail or ship items. This step is vital to obtaining the correct postal rates from your scale. Enter the first three digits of your ZIP Code. For example, if your ZIP code is 60089, then you would enter 600.The scale displays the ZIP Code entered and then resumes normal operation. NOTE: The scale displays the origination ZIP code as part of its start up sequence. To verify your origination ZIP code, switch the scale OFF and then ON again. Then look for the numbers that appear after the ozip_ message. 2

5 Keyboard and Display Description Function Keys0 1 ST/ Pri Selects First Class or Priority Mail (Retail). This key is also used to toggle between First Class Letter, First Class Flat, and First Class Parcel. The scale automatically switches to Priority Mail for items weighing more than the First Class weight limit. Pcl Post Express Media Zero/CE Selects domestic Parcel Post. The scale automatically determines if the rate should be Inter-BMC/ASF or Intra-BMC/ASF. Selects domestic Express Mail rate (Retail). Selects domestic Media (Book) Mail. Clears a numeric entry, revert back to weighing mode or re-zero the scale; in that order of precedence. Numeric Keys NOTE: Some numeric keys are dual purpose 0 9 Enters numeric data when prompted; usually a ZIP code. CAN (1) MEX (2) GP (3) (4) (5) OFF (7) HOLD (8) ON (9) Toggles between First Class International Letter, First Class International Flat, and First Class International Parcel. Toggles between First Class International Letter, First Class International Flat, and First Class International Parcel. Toggles between First Class International Letter, First Class International Flat, and First Class International Parcel to Group 3, 4 and 5 countries respectively. Press and hold three to four seconds to switch scale OFF. Places scale into hold mode (weight mode only). Press once to switch scale ON. 3

6 Scale Operation When the scale is first switched on, it will display some information and then default to weighing mode. In weighing mode, the scale will display pounds and ounces. NOTE: If your item weighs less than one pound, the pounds display will be blank. Before you place an item on the scale, make sure that the display shows zero weight (0.0). If the scale does not show zero, press the Zero/CE key once. How to obtain the rate for a letter or package: 1. Select the desired class of mail by pressing one of the scale s function keys. 2. Place the item on the center of the scale s platter and allow the reading to stabilize. If the class of mail you have selected requires a destination ZIP code, the scale will automatically prompt you. 3. Key-in the first three digits of the destination ZIP code. For example, if you are mailing to ZIP code 38118, you would enter The scale briefly displays the destination zone (for example ZonE4 for Zone 4) before displaying the proper rate. NOTES: 1. Not all classes of mail require a ZIP code. 2. If the item being weighed is over the maximum weight limit for that class of mail, the scale will automatically display ol. 3. If the ZIP code you have entered is invalid, the scale will briefly display Err. 4. If the ZIP code you have entered is eligible for an Intra-BMC/ASF discount, the scale will briefly display IntrA. (Parcel Post only) 4

7 First Class Operation: First Class pricing now takes into consideration shape (size) as well as weight. Prior to weighing the item, you should measure its length, height and thickness to determine whether it is a Letter, a Flat (Large Envelope) or a Parcel (Package). Please visit the official USPS website ( for current regulations. Regardless of the size, the scale will automatically progress through the weight-based First Class services when weight is added to (or removed) from the platform: WEIGHT ON SCALE DISPLAYED SERVICE 0 to 3.5 oz inclusive 1 st Class Letter >3.5 oz to 13 oz inclusive 1 st Class Flat >13 oz Priority Mail If your mail piece falls into the Flat or Parcel shape, you can manually select this category by pressing the 1 st /Pri key repeatedly until the correct category is displayed. The TP-10 briefly displays a message prior to displaying the rate: Ltr for Letter, FLt for Flat, PCL for Parcel and Pri for Priority Mail. WEIGHT ON SCALE TOGGLE SEQUENCE 0 to 3.5 oz inclusive 1 st Class Letter ->1 st Class Flat -> 1 st Class Parcel -> Priority Mail, -> 1 st Class Letter, etc. >3.5 oz to 13 oz inclusive 1 st Class Flat -> 1 st Class Parcel -> Priority Mail, 1 st Class Flat, etc. > 13 oz Scale stays in Priority Mail UPON RETURN TO ZERO The scale goes back to automatic mode with First Class Letter rates enabled. First Class International Operation: First Class International pricing also takes into consideration shape (size) as well as weight (see previous section). Regardless of the size, the scale will automatically progress through the weight-based First Class International services when weight is added to (or removed) from the platform: WEIGHT ON SCALE DISPLAYED SERVICE 0 to 3.5 oz inclusive 1 st Class International Letter >3.5 oz to 4 lb inclusive 1 st Class International Flat If your mail piece falls into the Flat or Parcel shape, you can manually select this category by pressing the Group (1 ~ 5) key repeatedly until the correct category is displayed. The SPS-10 briefly displays a message prior to displaying the rate: Ltr for Letter, FLt for Flat, and PCL for Parcel. WEIGHT ON SCALE TOGGLE SEQUENCE 0 to 3.5 oz inclusive 1 st Class International Letter ->1 st Class International Flat -> 1 st Class International Parcel -> 1 st Class International Letter, etc. >3.5 oz to 4 lb inclusive 1 st Class International Flat -> 1 st Class International Parcel -> 1 st Class International Flat, etc. UPON RETURN TO ZERO The scale goes back to automatic mode with First Class International Letter rates enabled. 5

8 Hold operation: For weighing large parcels or letters, 1. Switch the scale ON. 2. Select the desired class of mail. 3. Apply letter/parcel to scale. The scale displays the appropriate price. 4. Press the HOLD (8) key. The display briefly shows HoLd. 5. Remove the letter/parcel and the display will continue to show price. 6. To remove the Hold function, press the HOLD (8) key again; scale display briefly shows -HoLd. NOTE: For zoned rates, it will be necessary to key-in the ZIP code prior to pushing the Hold key. Auto Shut-off: When shipped from the factory, the scale is configured to automatically switch off after 2 minutes if not in use. You may disable this feature by performing the following steps: 1. Switch the scale OFF. 2. Press and hold the CAN (1) key while turning the scale back ON. 3. When the scale displays dashes ( ), you may release the CAN (1) key. The scale shows A-oFF briefly and then the current status of this feature ( on or off ). 4. Use the GP (4) key to toggle the status between on and off. 5. Press the ON (9) key to save the current setting and return to normal operating mode. Calibration Your TP-10 postal scale is ready to use right out of the box. There is no need to calibrate the scale unless you feel that the scale has become inaccurate. It is a good idea to check the calibration of your scale from time to time with a precision test weight. 1. Remove all items from the platter and turn the scale OFF. Press and hold the MEX (2) key while turning the scale back ON. 2. When the scale displays dashes ( ), you may release the MEX (2) key. The scale shows CAL briefly then ZERO. 3. Press the Zero/CE key. The scale then shows SAvE briefly and then Place a 5 pound test weight on the platter. The scale displays Err and then Press the ON (9) key to save the 5 pound calibration value. Once the 5 pound calibration value has been saved, the scale shows SAvE and then End. The scale then reverts to normal operation mode. Changing the origination ZIP code setting: If you change locations or just simply notice at start-up that your origination ZIP code is not set correctly, you may re-program it by performing the following steps: 1. Switch the scale OFF. 2. Press and hold the GP (5) key while turning the scale back ON. 3. When the scale displays dashes ( ), you may release the GP (5) key. The scale shows CLR briefly then ozip. 4. At the ENT ZIP prompt, enter the first three digits of your ZIP Code. For example, if your ZIP code is 60089, then you would enter 600. The scale displays the ZIP Code entered and then resumes normal operation. 6

9 Error Messages Indicates that the weighing capacity of the scale has been exceeded. The weight limit of the TP-10 is 10 pounds. Indicates that the item on the scale exceeds the weight limit for that class of mail. Indicates that the weight on the scale is negative. Press the Zero/CE key. Error occurred during calibration mode. The scale is not stable or your test weight is not large enough. Specifications Dimensions: 8-1/4 x 8-1/4 x 2 210mm x 210mm x 51mm Capacity/Division: Power Source: Tolerance: Operating Temp: Power Consumption: 0-10 lb x 0.1 oz 6-AA alkaline batteries or 9VDC, 100 ma AC adapter +/ % of full capacity 50 to 104 F (10 to 40 C) 50 ma maximum 7

10 Postal Rate Card Change Instructions The TP-10 postal rate information is contained in a pre-programmed memory device that is mounted on a rate card (a printed circuit board) which plugs into the scale. The rate card is positioned on the underside of the postal scale. Remove the lid by pushing the catch and pulling upwards. The rate card is situated directly beneath the lid. To remove, gently ease the rate chip from its socket. Pull rate card gently upwards to remove from socket Push catch and lift compartment lid When inserting the new rate card, ensure that the replacement is inserted correctly into the socket. Insert the rate chip into place by pushing down gently. Replace the compartment lid and your postal scale will be ready for use. Postal Rate Change Information The rates contained within this scale are updated periodically by the United States Postal Service. To receive an order form for an updated rate card when this occurs, please be sure to return the information card found inside the box with your scale. Or simply call the number located on the front panel of the scale. 8

11 TP-10 International Country Groups By Group Alphabetical Group 3 Albania... 4 China Armenia... 4 Hong Kong Belarus... 4 Japan Bosnia... 4 Bulgaria... 4 Group 4 China... 3 Albania Czech Republic... 4 Armenia Denmark... 5 Belarus Faroe Islands... 5 Bosnia Finland... 5 Bulgaria France... 5 Czech Republic Germany... 5 Hungary Hong Kong... 3 Lithuania Hungary... 4 Poland Iceland... 5 Romania Ireland... 5 Russia Japan... 3 Ukraine Lithuania... 4 Norway... 5 Group 5 Poland... 4 Andorra Portugal... 5 Denmark Romania... 4 Faroe Islands Russia... 4 Finland Spain... 5 France Sweden... 5 Germany Switzerland... 5 Iceland Ukraine... 4 Ireland Vatican City... 5 Norway Portugal Spain Sweden Switzerland Vatican City 9

12 TRINER SCALE & MFG. CO. LIMITED WARRANTY What is Covered: Triner Scale & Mfg. Co. Inc. warrants to the first end user customer of the Triner Scale product enclosed with this limited warranty statement that the product, if purchased and used in the United States, conforms to the manufacturer s specifications and will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase. What Triner Scale Will Do to Correct Problems: Should your Triner Scale product prove defective during the warranty period, please call Triner Scale at (800) for warranty repair instructions and return authorization. Triner Scale will, at its option, repair or replace on an exchange basis the defective unit as follows: PARTS New or comparable rebuilt parts in exchange for defective parts for one (1) year after original purchase. LABOR Carry-In or mail in service for 90 days from the date of original purchase. Labor and shipping cost after the 90 day period will be charged to you. If you are authorized by Triner Scale to ship the product to Triner Scale for repair, it is your responsibility to securely package the product in its original container or an equivalent and provide proof of the date of original purchase. You will be responsible for shipping costs to Triner Scale repair facility. When warranty service involves the exchange of the product or a part, the exchanged product may be new or previously repaired to the Triner Scale standard of quality. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty. What this Warranty Does Not Cover: This warranty covers only consumer use in the United States. Triner Scale is not responsible for warranty service should the Triner Scale label or logo or the serial number be removed or the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, interaction with non-triner Scale products, or service other than a Triner Scale Authorized Service. Packaging and shipping costs incurred in presenting your Triner Scale product for warranty service are your responsibility. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred. THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. EXPECT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER TRINER SCALE & MFG. CO. INC. NOR ITS AFFILIATES SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE TRINER SCALE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. No terms, condition, understanding, or agreements, purporting to modify the terms of this warranty shall have any legal effect unless made in writing and signed by a corporate officer of the seller. This warranty gives you specific legal rights, and you my have other rights which vary from jurisdiction to jurisdiction. TRINER SCALE & MANUFACTURING COMPANY INC Hacks Cross Road Olive Branch, MS Tel (662) Fax (662)