D-Series Rack & Pinion Pneumatic Actuators
|
|
- Scot Hunter
- 5 years ago
- Views:
Transcription
1 D-Series Rack & Pinion Pneumatic Actuators
2 Introduction Bettis D-Series pneumatic rack and pinion actuators provide its users with a tough, work-horse like product for reliable use and economy in valve automation. designed for use in quarter-turn applications, the D-Series is ideal for the on/ off or continuous operation of plug, butterfly and ball valves, as well as dampers and other 90 turn devices. The D-Series actuators are compact and lightweight, making them very suitable for installation within areas of tight piping connections. Operating Ranges A tough reliable work horse D-Series actuators produce torque outputs up to 22,379 in-lb (2,528 Nm) for doubleacting models and 7,939 in-lb (897 Nm) spring end torques on spring-return models. D-Series pneumatic actuators are suitable for continuous operation at pressures ranging from 40 to 120 psig (3 to 8 bar) while exposed to temperatures of -4 F to +175 F (-20 C to +80 C). Optional temperature trims extend the range from -40 F to +250 F (-40 C to C). Higher temperature options may be offered by consulting the factory. D-Series actuators offer many significant benefits. Among them are: with a 5 year warranty for use in all heavy duty applications Splined Drive Inserts The D-Series blow-out proof drive shaft is fitted with changeable inserts for universal mounting to a wide variety of valve stems without the need for brackets or couplings. Corrosion Resistance As standard, a polyester TGIC-free powder coated paint, in conjunction with a fully anodized housing and dichromate pistons, provides the D-Series actuators with a highly corrosion resistant surface. Coupled with a aircraft grade hard anodized aluminum pinion, all 304 SS fasteners, the D-Series provides excellent protection from hostile corrosive environments. BettisGuard TM For the most extreme applications, BettisGuard adds the highest practical level of corrosion protection by impregnating the body and end caps, both internally and externally, with a fluoropolymer-based epoxy resin giving a smooth, hard finish. Combined with aluminum pinion gears (option BGA). Three-Point Suspension D-Series pistons feature a unique, three point suspension system. Each piston has three, wide, machined load fingers strategically located about the rear circumference of the piston. These load fingers counteract the piston/ rack side loading and prevent the natural tendency of the piston/rack to tilt in the actuator bore. To accept and distribute this loading the D-Series is also equipped with a low friction Nylatron body bearing. The body bearing, which completely covers the working area of the piston fingers, prevents metal to metal contact and greatly reduces the high point loading often found on other designs with only narrow heal bearings. This feature provides for a more dependable actuator, with a longer life piston-seal and bearing cycle life. Dual Stroke Adjustment Allows stroke adjustment at both outbound and inbound strokes providing for precision alignment of your valves working element. Blowout-Proof Pinion A unique radiused gearing design profile that prevents the pinion gear from blowouts. NAMUR Mounting Allows close coupling to NAMUR designated accessories. The pinion gear interface supports an international standard drive for positioners, switches and other accessories. Modular The D-Series actuators can easily be converted from double-acting to spring-return configurations as well as many other options. Multiple-Spring Design The D-Series has a multiple spring design to facilitate 40 to 120 psig supply air requirements. All springs are nested to prevent misalignment and are safely contained by a spring release bolt.
3 Precision dual stroke adjustment Low friction piston head and heel bearings NAMUR accessory interface One piece, blow-out proof pinion gear Polyester TGIC-free powder coating provides excellent corrosion resistance and chip protection on end caps. Three point suspension eliminates metal-to-metal contact between pistons and cylinder and promotes high cycle life Acorn nut and O-ring seal protect the bolt threads, prevent contamination and water ingress Nylatron guide band provides 360 piston rack support NAMUR solenoid direct mounting interface pattern. Note that air ports are also tapped for conventional 1/4-18 NPT fittings, except the ultrasmall model D0012 which utilizes 1/8-27 NPT stainless steel fasteners ISO/DIN mounting interface for low-profile direct mounting to valves Replaceable drive inserts for universal mounting are easily adapted for custom applications Splined Inserts Fit into the bottom of the pinion gear shaft to allow universal mounting to a wide range of valve stem. Eliminates the need and expense of special brackets and couplings. Available for virtually any valve stem including square, double-d and key drives
4 Materials of Construction Body Precision cast anodized aluminum alloy Pinion Gear Single piece aircraft grade aluminum alloy, hard anodized. Pistons Cast aluminum alloy with Dichromate corrosion protection. End Caps Cast aluminum alloy with polyester TGICfree powder coated paint Fasteners 304 series stainless steel. Seals Nitrile seals are standard. Viton is available for high temperature and silicone for low temperature. Springs High quality carbon steel springs for maximum life. Bearings Nylatron as a standard. Special trims available. NAMUR Control Valves and Switches For actuator control via an electric or pneumatic signal, Bettis can supply a wide variety of control valves. The direct mount feature to the NAMUR interface eliminates the expense of interconnecting tubing and fittings. The universal valve (5/2 or 3/2) can be used for double-acting or spring-return. The single solenoid control is continuously rated and, in the event of electrical failure, the actuator returns to the clockwise (normal closed or open) position; bymechanical spring in single- acting and air in the case of double-acting. NAMUR is an international standard which allows direct mounting of control components such as solenoid valves, positioners and mechanical or proximity switches. Note that all D models 0025 through 1600 actuators have air ports which have been drilled and tapped to 1/4 18 NPT in the event that traditional imperial tubing or piping is required. D 0012models (due to size constraints) have as standard 1/8 NPT body air ports with a special non NAMUR bolt pattern. As options, a NAMUR solenoid interface block and NAMUR switch adapter are available for the D0012. Control Systems Bettis D-Series actuators can be equipped with a wide variety of control systems. Components such as the Topworx range of switchbox accessories and any NAMUR control component are provided as a standard from Emerson Process Management Valve Automation and are very easily bolted on to suit the required application. Bettis D-series Actuator Range Torque (@ 5.5 bar / 80PSI) Actuator sizes: Nm ,4 Valve types: - Ball : - Butterfly: D12 1/2 / DN12 D25 D40 D65 D100 D150 D200 D350 D600 D950 D / DN250 2 / DN50 20 / DN500 In.lb Typical Specifications Operating Pressures Temperature Media Rotation Spring-return and double-acting psig (3 to 8 bar) Standard -4 F to +175 F -4 F to +250 F* -40 F to +175 F *consult factory for higher temperatures Dry or lubricated air; non-corrosive gas Nominal 90, total travel adjustment 96 (see inset in middle page) For more detailed technical information see our online documentation under Document number [DOC.DSB.BD.US]
5 SIL Rating and FMEDA Bettis D series rack & pinion actuators have had a failure modes, effects and diagnostics assessment (FMEDA) conducted on them as performed by the Exida assessment organization, in accordance with the IEC code, indicating that they are suitable for use as a SIL 2 (Safety Integrity Level) rated product. Bettis D series are classified as type A1 devices with a hardware fault tolerance of zero and a user of a Bettis D actuator can utilize the failure rates shown in the FMEDA report in a probabilistic model of a safety instrumented function (SIF) to determine suitability in part for a safety instrumented system (SIS) usage at a particular safety integrity level (SIL). Actuator / Accessory interfaces Bettis D pneumatic actuators are manufactured to meet the following worldwide quality and safety standards: Safety Standards MP04 Bettis actuators can be packaged together with a range of accessories including; Wireless transmitter Digital valve positioners (DVC s) In addition, these accessories often include dedicated options like; Speed control plates Product Interface Standards VDI/VDE3845 (NAMUR) ISO 5211 Solenoids Breather blocks Company Operations Standards ISO 9001 Quality Assurance Pressure Regulators Manual override gear-boxes Block & bleed valves All of the above fit together by way of standard product interfaces such as NAMUR for solenoid and switch box connections and ISO-5211 for valve flange connections. Using these well known international standards ensures that Bettis products will comply with application requirements in projects worldwide. Emerson brands for most common control accessories: Digital Valve Controllers: Fisher Positioners: Fisher Regulators: Fisher Switch boxes: TopWorx Wireless position monitor: TopWorx Solenoid valves: ASCO Numatics
6 Contact Us: Emerson Process Management, Valve Automation facilities at your nearest location: North & South America Middle East & Africa Europe Asia Pacific GH Circle PO Box 508 Waller, TX T F Park Avenue West Mansfield, OH T F King Palm Drive Tampa, FL T F Pike Road Missouri City, Texas T F Av. Hollingsworth, 325, Iporanga Sorocaba, SP Brazil T F P. O. Box Dubai United Arab Emirates T F P. O. Box Abu Dhabi United Arab Emirates T F P. O. Box 3911 Al Khobar Saudi Arabia T F P. O. Box Jubail Saudi Arabia T F P. O. Box Doha Qatar T F Monteer Road, Isando Kempton Park, 1600 South Africa T F Asveldweg BR Hengelo (O) The Netherlands T F Siemensring Willich Germany T F /36 Allee du Plateau Villemomble France T F Via Montello 71/ Seregno (Milan) Italy T F Bracken Hill South West Industrial Estate Peterlee SR8 2LS United Kingdom T F ul. Konstruktorska str 11A Warsaw Poland T F C/ Francisco Gervás, Alcobendas Madrid Spain T F Letnikovskaya Str Moscow Russia and FSU T F Kian Teck Crescent Singapore T F /F Gateway Building No. 10 Ya Bao Road Chaoyang District Beijing P.R.China T F No.15 Xing Wang Road Wuqing Development Area Tianjin P.R.China T F Lot 13111, Mukim Labu Kawasan Perindustrian Nilai Nilai, Negeri Sembilan Malaysia T F Mountain Highway Bayswater, Victoria 3153 Australia T F Solitaire Corporate Park 151 M.V.Road, Andheri (E) Mumbai Maharashtra, India T F NOF, Shinagawa Konan Bldg 1-2-5, Higashi-shinagwa Shinagwa-ku, Tokyo Japan T F Emerson Process Management. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Brand mark listing are marks of one of the Emerson Process Management family of companies. All other marks are property of their respective owners. The contents of this publication are presented for information purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. The colour orange, U.S. Reg. No. 2,739,393, is a registered trademark of the Bettis Corporation. DOC.6P.BD.UK 4-10
D-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction Bettis D-Series pneumatic rack and pinion actuators provide its users with a tough, work-horse like product for reliable use and economy in valve
More informationPressureGuard. Self-Contained Hydraulic Emergency Shutdown Systems
PressureGuard Self-Contained Hydraulic Emergency Shutdown Systems Design and Construction Emerson Process Management - Valve Automation is a recognized leader in automated valve control in remote areas
More informationBettis CBA-300 Series Technical data sheet -
Date: August 2011 DOC.DSB.CBA300.U Bettis Technical data sheet - Sheet No.: C3PM 1.01 Rev. C Date: January 2011 Torque Ratings (Pneumatic) All Published Torques are Guaranteed Minimum Values. Double-Acting
More informationCBA-300 Series Pneumatic Actuators Improved design - compact, lightweight to suit all applications and environment
CBA-300 Series Pneumatic Actuators Improved design - compact, lightweight to suit all applications and environment Design and Construction Bettis is the global leader in valve automation, providing reliable
More informationD-Series Rack & Pinion Pneumatic Actuators
D-Series Rack & Pinion Pneumatic Actuators Introduction 2 Bettis D-Series pneumatic rack and pinion actuators provide its users with reliability and economy in valve automation. Specifically designed for
More informationBettis CBB-Series Technical data sheet - Imperial and Metric
Date: DOC.DSB.CBB.PN Bettis Technical data sheet - Imperial and Metric Sheet No.: CBPI 1.01 RevB Date: February 2010 Torque Ratings (Pneumatic) All Published Torques are Guaranteed Minimum Values. Double-Acting
More informationGas/Hydraulic Valve Operators. Safe and Efficient Gas Pipeline Control
Valve Operators Safe and Efficient Gas Pipeline Control Design and Construction Emerson Process Management Valve Automation is recognized worldwide for the reliability of its actuators under the most demanding
More informationPneumatic Rack & Pinion Actuators and Accessories. Reliable actuators to Fit and Forget
Pneumatic Rack & Pinion Actuators and Accessories Reliable actuators to Fit and Forget Optimum performance El-O-Matic is renowned as an industry benchmark for delivering the range of features and benefits
More informationShafer RV-Series Rotary Vane Valve Actuators Operating Valves in Critical Pipeline Applications
Shafer RV-Series Rotary Vane Valve Actuators Operating Valves in Critical Pipeline Applications Applications Emerson Process Management Valve Automation is recognized worldwide for the reliability of its
More informationFieldQ Pneumatic actuators and controls Fully integrated proven hardware and design
FieldQ Pneumatic actuators and controls Fully integrated proven hardware and design FieldQ : The Fully Integrated Solution With FieldQ, Emerson is your single source for a fully integrated actuator and
More informationMultiport Actuator and Multiport Flow Selector. Compact and economical production test manifold and actuator
Multiport Actuator and Multiport Flow Selector Compact and economical production test manifold and actuator Design and Construction Emerson Process Management Valve Automation provides a broad product
More informationXL Pneumatic Actuators High on Quality High on Reliability...High on Service
XL Pneumatic Actuators High on Quality High on Reliability...High on Service Reduce capital cost Reduce installation cost Reduce maintenance cost Increase plant up-time Increase plant and operator safety
More informationCBA-300 Series Pneumatic Actuators Strong, Efficient and Cost Effective
CBA-300 Series Pneumatic Actuators Strong, Efficient and Cost Effective 3 11 10 PED 97/23/EC Compliant Suitable for SIL 2 and SIL 3 Water Ingress Protected IP66 and IP67M Five-Year Warranty NAMUR Topworks
More informationPneumatic Rack & Pinion Actuators and Accessories. Reliable actuators to Fit and Forget
Pneumatic Rack & Pinion Actuators and Accessories Reliable actuators to Fit and Forget TM Optimum performance El-O-Matic is renowned as an industry benchmark for delivering the range of features and benefits
More informationPneumatic Rack & Pinion Actuators and Accessories
Pneumatic Rack & Pinion Actuators and Accessories Reliable actuators to Fit and Forget EL Matic TM Optimum Performance EL-O-Matic is renowned as an industry benchmark for delivering the range of features
More informationDisassembly and Reassembly for CBAX30-SR (Spring Return) Series Pneumatic Actuators
Service Instructions Part Number: 137463, Rev. B Release: May 2012 Disassembly and Reassembly for CBAX30-SR (Spring Return) Series Pneumatic Actuators Service Instructions Table of Contents Part Number:
More informationCBA-Series Scotch-Yoke Pneumatic Actuators Compact, Lightweight and Economical
CBA-Series Scotch-Yoke Pneumatic s Compact, Lightweight and Economical 2 PED 97/23/EC Compliant Xylan Coated Cylinder Water Ingress Protected IP66 and IP67M Low Maintenance Economical Jackscrew Option
More informationreliable actuators to
reliable actuators to & Fit Forget Pneumatic Rack & Pinion Actuators a new look Reliable As Ever 40 years of success and still delivering The EL-O-Matic F-Series actuator is the result of 40 years of production
More informationCBB-Series Scotch-Yoke Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment
CBB-Series Scotch-Yoke Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment Design Design and and Construction Bettis is the global leader in providing safe,
More informationService Instructions Part Number:137465E, Rev. F Release: May Disassembly and Reassembly for CBA-SR (Spring Return) Series Pneumatic Actuators
Service Instructions Part Number:137465E, Rev. F Release: May 2012 Disassembly and Reassembly for CBA-SR (Spring Return) Series Pneumatic Actuators Service Instructions Part Number: 137465E, Rev. F Table
More informationCBA300 Series Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment
CBA300 Series Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment Design and Construction Emerson is the global leader in valve automation, providing reliable
More informationCBB-Series Scotch-Yoke Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment
CBB-Series Scotch-Yoke Pneumatic Actuators Improved Design - Compact, Lightweight To Suit All Applications And Environment Design and Construction Emerson is the global leader in providing safe, reliable,
More informationCBA-Series Pneumatic Dimension Data Metric
Product Data Sheet October 2011 DOC.DSB.CBA.US CBA-Series Pneumatic Dimension Data Metric HD-Series pneumatic actuators are compact, lightweight and ideally suited for automating ball, butterfly and non-lubricated
More informationProduct Data sheets. DOC.DSB.DB.US Rev. E August D-Series. Bettis D-Series. Technical data pneumatic Rack and Pinion actuators.
Product s DOC.DSB.DB.US Rev. E ugust 2011 Bettis Technical data pneumatic Rack and Pinion actuators Sheet No.: DPI 1.01 Rev. Technical details Standard actuator Specifications Pressure range: Double acting
More informationTEC2000 First came intelligent actuators. Now comes one with common sense.
TEC2000 First came intelligent actuators. Now comes one with common sense. EIM is a world leader in pneumatic and hydraulic quarter-turn and linear valve actuators as well as quality electric actuators.
More informationPressureGuard. Self-Contained Hydraulic Emergency Shutdown Systems For Rotary or Non API 6A Linear Valves
PressureGuard Self-Contained Hydraulic Emergency Shutdown Systems For Rotary or Non API 6A Linear Valves Design and Construction Emerson - Actuation Technologies is a recognized leader in automated valve
More informationBettis GH-Series Pneumatic Spring-Return Actuator Torque Chart Imperial
VA-DC-000-0179 Rev. 2 June 2017 Pneumatic Chart Imperial Copyright Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website www.emerson.com/bettis
More informationGVO Series Linear Valve Operators. Field-Proven for Safety Shutdown and Control
GVO Series Linear Valve Operators Field-Proven for Safety Shutdown and Control GVO LP-DA Pneumatic linear actuator Double acting Cylinder size from 5 to 48 tandem MAWP up to 150 psi GVO HP-DA Hydraulic
More informationSafe and Efficient Gas Pipeline Control
Safe and Efficient Gas Pipeline Control Bettis GH-Series Valve Operators Controls high pressure natural gas pipelines in remote locations and under severe climatic conditions Design and Construction Emerson
More informationInstallation, Operation and Maintenance Manual DOC.IOM.MO.E October MO-Series Manual Override Gearboxes
Installation, Operation and Maintenance Manual DOC.IOM.MO.E October 2017 MO-Series Manual Override Gearboxes EL Matic TM Installation, Operation and Maintenance Manual Table of Contents DOC.IOM.MO.E Rev.
More informationValve Automation Technologies from Emerson The most comprehensive and proven portfolio available anywhere
Valve Automation Technologies from Emerson The most comprehensive and proven portfolio available anywhere The Most Comprehensive and Proven Portfolio Available Anywhere The breadth of products described
More informationBettis G01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Actuator Torque Chart Imperial
Product Data Sheet VA-DC-000-0214 Rev. 1 Bettis G01-Extension Series June 2017 Bettis G01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Actuator Chart Imperial Copyright Emerson. The
More informationBETTIS GENERAL OPERATING AND MAINTENANCE INSTRUCTIONS FOR PNEUMATIC ROTARY VALVE ACTUATORS
ENGLISH LANGUAGE BETTIS GENERAL OPERATING AND MAINTENANCE INSTRUCTIONS FOR PNEUMATIC ROTARY VALVE ACTUATORS PART NUMBER: 074650E REVISION: "C" DATE: December 2001 Page 1 of 3 1.0 GENERAL 1.1 Bettis ninety
More informationBettis RGS Q-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet April 2016 RGS Rev.
Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 21,000 in-lb (2373 N m) Ductile Iron or Stainless-Steel Construction Temperatures from -60 F to 450 F (-51 C
More informationGas/Hydraulic Valve Operators. Safe and Efficient Gas Pipeline Control
Valve Operators Safe and Efficient Gas Pipeline Control Design and Construction Emerson Process Management Valve Automation is recognized worldwide for the reliability of its actuators under the most demanding
More informationBettis GC01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Actuator Torque Chart Metric
Product Data Sheet VA-DC-000-0218 Rev. 1 Bettis GC01- Extension Series June 2017 Bettis GC01-Extension Series Extension Pneumatic Double-Acting & Spring-Return Chart Metric Copyright Emerson. The information
More informationOperating Instructions M3 and M3HW Jackscrew Manual Override. Service Instructions Rev. D October 2014
Operating Instructions M3 and M3HW Jackscrew Manual Override Service Instructions 153701 Rev. D October 2014 Service Instructions 153701 Rev. D Table of Contents October 2014 Table of Contents Section
More informationShafer Poppet Block Control
PBC-01102001 Rev. A January 2001 Shafer Poppet Block Control USASI SCHEMATIC Normally closed, double three-way poppet valve, with open exhaust, manual and pilot actuated. PILOT EXHAUST OR RETURN OIL PBC-01102001
More informationG-Series Pneumatic and Hydraulic Actuators. Next Generation Actuation Technologies Solutions
G-Series and Hydraulic Actuators Next Generation Actuation Technologies Solutions Design and Construction Bettis G-Series with Wireless Transmitter Emerson sets the standards for innovation and quality
More informationGTD-Series. Direct Gas Actuators
GTD-Series Direct Gas Actuators GTD-Series Direct Gas Actuators Enclosed Cast Housing Bearings Xylan Coated Internals Piston Seals Travel Stop Vent Check NAMUR Acculine Shaft Drive Features and Benefits
More informationManual E1195 (MCP) Series 2000
Manual E1195 (MCP) Series 2000 Installation and Maintenance Part Number: E2K-401-0313, Rev. A Release: Mar 2013 READ THIS MANUAL COMPLETELY When communicating with BETTIS for replacement parts or for technical
More informationInstallation, Operation and Maintenance Manual E Rev. D September Bettis Pneumatic Rotary Valve Actuators
Installation, Operation and Maintenance Manual 074650E Rev. D September 2014 Bettis Pneumatic Rotary Valve Actuators Installation, Operation and Maintenance Manual 074650E Rev. D Table of Contents September
More informationInstallation, Operation, and Maintenance Instructions for Bettis RGS F-Series Spring-Return (SR) Actuators
Part Number: RGS011110-3, Rev. 0 Release: November 2015 Installation, Operation, and Maintenance Instructions for Bettis RGS F-Series Spring-Return (SR) Actuators Part Number: RGS011110-3, Rev. 0 Table
More informationShafer RV-Series Rotary Vane Valve Actuators Valve Operating Systems for Critical Pipeline Applications
Shafer RV-Series Rotary Vane Valve Actuators Valve Operating Systems for Critical Pipeline Applications Applications Emerson Actuation Technologies is recognized worldwide for the reliability of its actuators
More informationGTD-Series. Direct Gas Actuators
GTD-Series Direct Gas Actuators GTD-Series Direct Gas Actuators Enclosed Cast Housing Yoke Pin B Travel Stop Vent Check NAMUR Acculine Shaft Drive Features and Benefits For more than 50 years Bettis and
More informationShafer SH Series Actuator. Service Manual SHSM Rev. 1 September 2016
Shafer SH Series Actuator Service Manual SHSM-2016-09 Rev. 1 September 2016 Service Manual SHSM-2016-09 Rev. 1 Table of Contents September 2016 Table of Contents Section 1: Seal Replacement Instructions...1
More informationUnleashing The Power of Valve Automation
Unleashing The Power of Valve Automation Appreciating How Valve Automation Contributes To An End-User s I/O Count On/off valves typically represent 90 percent of the total valve population in a production
More informationBettis Nuclear Series Actuators. Operation and Maintenance Manual VA Rev. E June 2014
Bettis Nuclear Series Actuators Operation and Maintenance Manual VA065043 Rev. E June 2014 Installation and Operation Manual VA065043 Rev. E Table of Contents June 2014 Table of Contents Section 1: General...1
More informationBHH and BL Series Hydraulic Actuators Designed for compactness and reliability
BHH and BL Series Hydraulic Actuators Designed for compactness and reliability Quarter-Turn or Linear Double-Acting or Spring-Return Operates in the toughest enironments Adapts and mounts to all types
More informationBettis TEC2 Electric Actuator with Model 500 Quick-Start Guide. Quick-Start Guide E2K Rev. 2 October 2017
Bettis TEC2 Electric Actuator with Model 500 Quick-Start Guide Quick-Start Guide Quick-Start Guide Welcome to TEC2 Welcome to TEC2 The TEC2 actuator s Local Display Module (LDM) and Remote Display Module
More informationXL Pneumatic Actuators High on Quality High on Reliability... High on Service
XL Pneumatic Actuators High on Quality High on Reliability... High on Service Hytork High on Quality Hytork High on Reliability The XL actuator range of actuators is the result of Hytork s 30-plus years
More informationHL-Series Electric Actuator Precision control for linear valves
HL-Series Electric Actuator Precision control for linear valves Our products are ISO-9001 certified and internationally qualified for hazardous and weather-tight environments. Emerson has been providing
More informationShafer RV-Series Rotary Vane Valve Actuators
Shafer RV-Series Rotary Vane Valve Actuators Product Data Sheet RV-ASDD-D-3-06-09 Rev. 1 November 2017 Metric Units Dimension: Torque: Pressure: Weight: Volume: Centimeters (cm) Newton Meters (Nm) Bar
More informationBETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB DOUBLE ACTING SERIES PNEUMATIC ACTUATORS
ENGLISH LANGUAGE BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB DOUBLE ACTING SERIES PNEUMATIC ACTUATORS PART NUMBER: 068269E REVISION: "C" RELEASE DATE: December 2001 Page 1 of 12 CONTENTS
More informationVALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL D DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS The Jamesbury Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle
More informationBETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB-SR SPRING RETURN SERIES PNEUMATIC ACTUATORS
ENGLISH LANGUAGE BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB-SR SPRING RETURN SERIES PNEUMATIC ACTUATORS PART NUMBER: 068270E REVISION: "C" RELEASE DATE: December 2001 Page 1 of 12 CONTENTS
More informationInstallation, Operation and Maintenance Manual HP/DHV Rev. 1 November Shafer Hand Pump-Double Holding Valve
Installation, Operation and Maintenance Manual HP/DHV Rev. 1 November 2017 Shafer Hand Pump-Double Holding Valve Installation, Operation and Maintenance Manual HP/DHV Rev. 1 Table of Contents November
More informationVALV-POWR SERIES VPVL MODEL C DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS
VALV-POWR SERIES VPVL MODEL C DOUBLE-ACTING AND SPRING-RETURN RACK- AND-PINION COMPACT PNEUMATIC ACTUATORS VALV-POWR VPVL double-opposed piston actuators combine the benefits of high cycle life, a rugged
More informationInstallation Operation & Maintenance Instructions
Installation Operation & Maintenance Instructions Applicable to Models: XL 26 XL 281 XL 2586 XL 71 XL 426 XL 4581 XL 131 XL 681 XL 186 XL 1126 XL 221 XL 1371 1 Important Safety Procedures Qualified maintenance
More informationSERIES 5A AND 5B VALVE STATUS MONITOR THE HIGH PERFORMANCE COMPANY BRAY SERIES 70 ELECTRIC ACTUATORS
SERIES 5A AND 5B VALVE STATUS MONITOR BRAY.COM THE HIGH PERFORMANCE COMPANY BRAY SERIES 70 ELECTRIC ACTUATORS 1 SERIES 5A AND 5B INTRODUCTION The Bray Series 5A and 5B Valve Status Monitors (VSM) provide
More informationMultiport Flow Selector. Compact And Economical Production Test Manifold
Multiport Flow Selector Compact And Economical Production Test Manifold Design and Construction Emerson Process Management Valve Automation provides a broad product offering of automation and control solutions
More informationHPUs Hydraulic Power Units
HPUs Hydraulic Power Units DESIGN PHILOSOPHY Shafer has been manufacturing hydraulic power units (HPUs) for over 40 years. The primary industries we serve are natural gas, oil and water. The majority of
More informationInstallation, Operation and Maintenance Manual RGS Rev. 0 November Bettis RGS F-Series Spring-Return Actuators
Installation, Operation and Maintenance Manual RGS011110-3 Rev. 0 November 2015 Bettis RGS F-Series Spring-Return Actuators Installation, Operation and Maintenance Manual RGS011110-3 Rev. 0 Table of Contents
More informationAutomax SuperNova Series. Pneumatic Rack & Pinion Actuators
Automax SuperNova Series Pneumatic Rack & Pinion Actuators The Flowserve S Series SuperNova pneumatic actuator is the latest development of the previous version, which won worldwide praise for its reliability,
More informationPneumatic & Electric Actuator Product Guide System Compatible Products for Worldwide Flow Control
Pneumatic & Electric Actuator Product Guide System Compatible Products for Worldwide Flow Control EL-O-MATIC Contents Page Pneumatic Products E&P Series Rack and Pinion Rotary Actuators 3-9 PosiFlex Integrated
More informationBettis EHO Electro-Hydraulic Operator
ettis Electro-Hydraulic Operator The ettis is a self-contained, quarter-turn, valve actuator that combines proven technologies from Emerson s Valve utomation. The actuator has been designed for critical
More informationFisher 2625, 2625SST, and 2625NS Volume Boosters
2625, 2625SST, 2625NS Volume Boosters Product Bulletin Fisher 2625, 2625SST, and 2625NS Volume Boosters A Fisher 2625, 2625SST, or 2625NS volume booster is part of the 2625 Series volume boosters and is
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationFieldQ Pneumatic actuators and controls The Fully Integrated solution
FieldQ Pneumatic actuators and controls The Fully Integrated solution What is the true cost of your Valve Automation solutions? 20% reduction in installation & commissioning time Integrated plug & play
More informationTrue Fail-Safe Technology and Precision Control for Reliable Shutdown
True Fail-Safe Technology and Precision Control for Reliable Shutdown RTS Series Compact Fail-Safe Electric Actuators Reliable, Accurate, Compact Electric Actuation Technology for Critical Fail-Safe and
More informationFisher 2052 Diaphragm Rotary Actuator
2052 Actuator Product Bulletin Fisher 2052 Diaphragm Rotary Actuator Fisher 2052 spring-and-diaphragm rotary actuators are used on rotary-shaft valve bodies for throttling or on-off applications. The 2052
More informationEIM TEC2 Electric Actuator with Model 500 Quick-Start Guide
Quick-Start Guide EIM TEC2 Electric Actuator with Model 500 Quick-Start Guide (Model 500 Discontinued) Quick-Start Guide Welcome to TEC2 Welcome to TEC2 The TEC2 actuator s Local Display Module (LDM)
More informationMasoneilan* 51/52/53 Series
Technical Specifications Rev.E - 01/2018 Masoneilan* 51/52/53 Series Cylinder Actuator BHGE Data Classification: Public Conversion Table All the USCS values are converted to metric values using the following
More informationFisher 377 Trip Valve
377 Trip Valve Product Bulletin Fisher 377 Trip Valve Fisher 377 pressure sensing trip valves are for control applications where a specific valve/actuator action is required when supply pressure falls
More informationRack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING
Rack & Pinion Pneumatic Actuators SPRING RETURN DOUBLE ACTING Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing
More informationFisher 657 and 667 Diaphragm Actuators
657 and Actuators Product Bulletin Fisher 657 and Diaphragm Actuators Fisher 657 and spring-opposed diaphragm actuators position the valve plug in the valve in response to varying controller or valve positioner
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationOBSOLETE DOCUMENT. 167D Series Switching Valves. Bulletin 71.7:167D. Introduction. Features
167D Series Switching Valves P1185 Type 167D Two-way Switching Valve Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are typically used to deliver constant reduced
More informationPneumatic Actuators. 1. DIE CAST ALUMINUM END CAPS: standard polyester powder coated
4 5 Pneumatic s 1 2 6 NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: standard (-4 F;+185 F), high (-4 F;+302 F), low (-40 F;+185 F) Pre lubricated for life of actuator at assembly 100%
More information167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
More informationAutomation Capabilities
Crane Valves North America Automation Capabilities Summary of Capabilities Automation Crane Valves North America provides a variety of valve automation products, including pneumatic and electric actuators,
More informationMT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
More informationDisassembly and Reassembly for WG Series Worm Gear Operator. User Instructions Part Number: XXXXXX, Rev. 0 Release: February 2017
Disassembly and Reassembly for WG Series Worm Gear Operator User Instructions Part Number: XXXXXX, Rev. 0 Release: February 2017 User Instructions Doc. Number: XXXXXXXX Table of Contents February 2017,
More informationValve Automation Technologies from Emerson The Most Comprehensive And Proven Portfolio Available Anywhere
Valve Automation Technologies from Emerson The Most Comprehensive And Proven Portfolio Available Anywhere The Most Comprehensive And Proven Portfolio Available Anywhere The breadth of products described
More informationGH-BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR MODELS HD521-S AND HD721-S DOUBLE ACTING SERIES HYDRAULIC ACTUATORS
GH-BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR MODELS HD521-S AND HD721-S DOUBLE ACTING SERIES HYDRAULIC ACTUATORS PART NUMBER: 074979 REVISION: "A" DATE: July, 1993 Page 1 of 9 1.0 INTRODUCTION
More informationBETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY CB735-SR AND CB735A-SR SPRING RETURN SERIES PNEUMATIC ACTUATORS
BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY CB735-SR AND CB735A-SR SPRING RETURN SERIES PNEUMATIC ACTUATORS PART NUMBER: 074957 REVISION: "A" DATE: January 4, 1995 Page 1 of 12 1.0 INTRODUCTION
More informationType 1035/El-O-Matic Rack-and-Pinion Rotary Actuator
Product Bulletin Type 1035/El-O-Matic Rack-and-Pinion Rotary Actuator Type 1035/El-O-Matic double-acting and spring-return rotary valve actuators are compact, simply-designed control devices quality-engineered
More information31/32 Spring Diaphragm Rotary Actuators
GE Oil & Gas Technical Specifications 08/2012 Masoneilan * Valves 31/32 Diaphragm Rotary Actuators The 31/32 Series actuator is designed to provide high performance, reliability and long service life.
More informationFisher 685 Piston Actuator
685 Piston Actuator Product Bulletin Fisher 685 Piston Actuator The 685 is a double-acting piston actuator that provides accurate, high thrust output for short to long travel applications. This actuator
More informationFORGED STAINLESS STEEL Rack And Pinion Actuator S Series
FORGED STAINLESS STEEL Rack And Pinion Actuator S Series The Air Torque S Series stainless steel actuators are a corrosion resistant rack and pinion actuator particularly engineered for corrosive environments
More informationDRAFT. Installation, Operation and Maintenance Instructions for Emerson KBG-V Series
Part Number: KBG-V.IOM.1001, Rev. 0 Release: February 2017 Installation, Operation and Maintenance Instructions for Emerson KBG-V Series DRAFT Part Number: KBG-V.IOM.1001, Rev. 0 Table of Contents February
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationM1/M2 POCKET FEEDER. Compact design DESIGN FEATURES. Special ball and seat design. Large ball pocket capacity. Automatic cycling
M1/M2 POCKET FEEDER The latest member in the M1/M2 ball valve series is the Pocket Feeder, for separator service. It is designed for automatic removal of sand and other fine debris from process. Typical
More informationBHH and BL Series Hydraulic Actuators Designed for compactness and reliability
BHH and BL Series Hydraulic Actuators Designed for compactness and reliability Quarter-urn or Linear Double-Acting or Spring-Return Operates in the toughest enironments Adapts and mounts to all types of
More informationflowserve.com Limitorque LRP Limitorque Rack & Pinion Pneumatic Actuator
flowserve.com Limitorque LRP Limitorque Rack & Pinion Pneumatic Actuator 1 LRP Limitorque Rack and Pinion Actuator Series Limitorque is the brand customers trust when safe, reliable and robust valve automation
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationKTM PNEUMATIC ACTUATORS AK SERIES (FOR SMALL AND MIDDLE SIZED VALVES)
Compact and light-weight actuator, equipped with a guide rod for smooth operation and extended durability FEATURES Double acting and single acting type are of the same shape and dimension Double rack and
More informationInnovation in actuation.
Innovation in actuation. Keystone EPI-2 Quarter Turn Electric Actuators Control your low-torque quarter turn valves and dampers more effectively, even in the largest plants. A world of experience Keystone
More informationC Series Pneumatic Rack & Pinion Rotary Actuators
Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:
More informationMasoneilan* 87/88 Series
Technical Specifications 11/2017 Masoneilan* 87/88 Series Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced inventory. BHGE
More information