SET-LED-KIT. Specifications. Entablature Small, PicoEmitter LED Upgrade Kit. Type: Job: Catalog number: Approvals: Date: Page: 1 of 5

Transcription

1 Catalog number: Specifications 60 Light Emitting Diodes Total System Watts = 67W / / LED Kit Electrical Module Option Approvals: Date: Page: 1 of 5 Electrical Module: All electrical components are UL recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Module includes a driver, LifeShield temperature control device and surge protector. Electrical module attaches to housing with no-tool hinges and latches, accessible by opening the lens frame only. Driver is rated for -40 F starting and has a 0-10V dimming interface for multi-level illumination options. Optical Module: Each Precision, replaceable PicoEmitter are positioned to achieve directional control toward desired task. The entire EmitterDeck fastens to the housing as a one-piece module. NOTE: Existing product conditions are taken as the base point. Participation rules apply. See complete warranty provisions for further details. IMPORTANT: Disable all power to the luminaire before conducting any maintenance or upgrade activity. Failure to do so will create a hazardous working environment. Listed To: UL 1598 Standard for Luminaires - UL 8750 Standard for Safety for Light Emitting Diode (LED) Equipment for use in Lighting Products and CSA C22.2#250.0 Luminaires. LED EmitterDeck CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious personal injury. Suggested Tools: Flat Blade Screw Driver Electrical Module KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.

2 Page: 2 of 5 Standard Features Fixture Cat. No. designates fixture and distribution : x Distribution: l 1 = Type I l 2 = Type II l 3 = Type III l 4 = Type IV l 5 = Type V E 35 Optic: E = PicoEmitter Current: 35 = 350 ma l R = Type R Right l L = Type L Left Light Distribution: TYPE II TYPE III TYPE IV TYPE V Electrical Module TYPE R One-Way Right TYPE R One-Way Left Cat. Nos. for Electrical Modules available: 60L xk x Source: 60L = 60 LED s Color Temperature: l 2K = 580nm - Amber l 3K = 3000K l 4K = 4200K l 5K = 5100K Voltage: l 120 = 120V l 208 = 208V l 240 = 240V l 277 = 277V l 347 = 347V 1 l 480 = 480V 1 1 Due to current unavailability of 347V and 480V drivers, specification of these voltages may feature an integral step-down transformer.

3 Page: 3 of 5 Standard Features 0-10V Dimming Interface Driver has a 0-10V dimming interface with a dimming range of %. Is compatible with most control systems including Hubbell Building Automation wihubb. Approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV. Note: Not compatible with current sourcing dimmers. Controls compatible via Gray and Purple dimming lead. Standard Input Black (+) White (-) Green (GND) Fixture Housing Gray Dimming Lead (-) Purple Dimming Lead (+) 30 ma Max Optional Features Neighbor Friendly Optic: Cat. No. NFO No Option Integrated Neighbor Friendly Optic on each PicoEmitter module to completely control unwanted backlight. Most effective with Type III and IV distributions. Fusing Cat. No. (see right) l No Option High temperature fuse holders factory installed inside the fixture housing. Fuse included. Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.: l SF l DF l DF l SF l SF l DF Single Fuse

4 Page: 4 of 5 Lumen Data Spectroradiometric Projected Lumen Maintenance 3000K Average 4200K Average 5100K Average Correlated Color Temp. CCT (K) 2800K-3175K 3800K-4600K 4600K-5600K ma 100,000 hrs (Calculated L70) % 611,000 Hrs. Color Rendering Index (CRI) Power Factor >.90 >.90 >.90 Electrical Drive Current Volts - AC Amps - AC System Watts B.U.G. Rating (TM15) in Lumens wher B = Backlight, U = Uplight, G = Glare Temperature TYPE 1 TYPE 2 TYPE 3 TYPE 3 NFO TYPE 4 TYPE 4 NFO TYPE 5 TYPE L/R 3000K TBD B1 U0 G1 B1 U0 G1 B1 U0 G1 B1 U0 G1 B0 U0 G1 B2 U0 G1 TBD 4200K TBD B2 U0 G2 B1 U0 G1 B1 U0 G1 B1 U0 G1 B0 U0 G1 B3 U0 G1 TBD 5100K TBD B2 U0 G2 B1 U0 G1 B1 U0 G1 B1 U0 G2 B0 U0 G1 B3 U0 G1 TBD Absolute Lumens Temperature TYPE 1 TYPE 2 TYPE 3 TYPE 3 NFO TYPE 4 TYPE 4 NFO TYPE 5 TYPE L/R 3000K TBD TBD 4200K TBD TBD 5100K TBD TBD LED performance and lumen output continues to improve at a rapid pace. Log onto to download the most current photometric files from Kim Lighting s IES File Library.For custom optics and color temperature configurations, contact factory. For warranty see

5 Page: 5 of 5 HID To LED Warranty When properly installed and under normal conditions of use, Kim Lighting warrants LED products ( Product(s) ) sold by Kim Lighting to be free from defects for (i) a period of five (5) years for LED Light Engines (PicoEmitters),(ii) a period of five (5) years for LED power components(led Driver, LifeShield Device), (iii) a period of six (6) years for LED Light Engines (PicoEmitters) and (iv) for a period of five (5) years for the re-used metal housing components of the existing luminaire from the date of sale of the LED Upgrade Kit to the buyer as specified in Kim Lighting shipment documents for each Product(s). Conditions and limitations of the re-used metal housing component warranty are as follows: 1) Existing luminaire must have been purchased within 10 years prior to the date of sale of the, 2) Poles, arms, accessories, and options are excluded, 3) Products installed in harsh or hazardous environments are excluded, 4) Warranty covers defects in material and workmanship in excess of the normal wear and tear to which the luminaire can normally be expected to experience at the judgment of Kim Lighting from the baseline condition of the luminaire at the time of installation and registration of the LED, 5) Owner must within 30 days of shipment of the LED by Kim Lighting register the project by ing at least five (5) photo images of at least three (3) upgraded housings to upgrade@kimlighting.com referencing the project name and location, LED purchase order number, and approximate purchase date of the existing housing(s). Failure to provide complete registration information within the required 30 days will dissolve the five year housing warranty. 6) Kim Lighting reserves the right to deny the five year metal housing component warranty extension upon review of the submitted product images if the existing/original condition of the product indicates substantially excessive wear and tear beyond normal expectations given the product age. 7) Paint/finish of the fixture housing is excluded from this warranty for fixtures that have been installed for more than ten (10) years prior to the application of and are not included as part of Kim Lighting warranty. The buyer agrees to make all claims regarding defects or deficiencies in the Product(s) at the time of the claim. Valid warranty claims must be made within the warranty period specified herein above, and submitted within thirty (30) days of discovery of the damage or defect. No FIELD labor, repair, DISMANTLE, or installation charges are included with this warranty. Kim Lighting may repair or replace any Product(s) covered by this warranty at its sole discretion and in accordance with its procedure. Any unauthorized return, repair, replacement or modification of the Product(s) shall avoid this warranty. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.