Aluminum Pipe Structure Series New Items 2018

Size: px

Start display at page:

Download "Aluminum Pipe Structure Series New Items 2018"

Evangeline Donna Conley
5 years ago
Views:

1 Aluminum Pipe Structure Series New Items 2018

3 Index Introduction Overall Contents GF-N Aluminum Pipe Structural GF-G Aluminum Pipe Structural GF-S Aluminum Pipe Structural GF Motion GF Other Index Contact

Green Frame Green Frame is the basic material used to build all of the structures found in the Ready Solution

It optimizes the balance between rigidity and weight, making it 60% lighter than welded steel and 20% stronger

Thanks to an alumite treatment, Green Frame is also highly resistant to rust, scratches, and dust.

7 kgf / 240 lbf Advanced Connections Each connector is affixed with a single, dedicated bolt designed to produce a

4 Green Frame Green Frame is the basic material used to build all of the structures found in the Ready Solution Catalog. It optimizes the balance between rigidity and weight, making it 60% lighter than welded steel and 20% stronger than resin coated steel piping. Thanks to an alumite treatment, Green Frame is also highly resistant to rust, scratches, and dust. Light Weight S 19 mm / kgf / 24 lbf N 28 mm / kgf / 108 lbf G High Rigidity 43 mm / kgf / 240 lbf Advanced Connections Each connector is affixed with a single, dedicated bolt designed to produce a right angle and parallel lines along the notched profile. In trials, new users assembled a GF structure up to 67% faster than the same structure using another modular system. Green Frame connectors make minor or major adjustments quick and easy, saving time and manpower. 4 Full modularity Dedicated bolt 90º angles Parallel lines

Truly Green Green Frame is the ideal choice for work sites seeking to reduce their impact on our environment.

In addition, the material s inherent light weight compared to steel means less impact during transport, and its resistance to rust and scratches combined with its high modularity means more

This reduces strain on operators and improves ergonomics. Lasting Finish The alumite-coated GF Series was tested by exposing it to water and keeping the components in highhumidity.

5 Truly Green Green Frame is the ideal choice for work sites seeking to reduce their impact on our environment. SUS s Fukushima location recycles retired frames and connectors back into new extrusions, saving energy and resources. In addition, the material s inherent light weight compared to steel means less impact during transport, and its resistance to rust and scratches combined with its high modularity means more repurposing and less waste. Lightweight Aluminum is approximately 33% the mass of steel. Because most of the connectors are also aluminum, GF structures are easy to build and maneuver. This reduces strain on operators and improves ergonomics. Lasting Finish The alumite-coated GF Series was tested by exposing it to water and keeping the components in highhumidity. In the test, GF far outlasted steel exposed to the same conditions. Aluminum Normal Alumite A type compound coating Steel Reduced Carbon Footprint The amount of electricity used to refine a recycled aluminum ingot is only 3% of that needed for a new one. GF frames and connectors are 99% recyclable, minimizing energy consumption and environmental impact. Reusable GF frames and connectors easily answer the demands of evolving work environments. Change a structure s orientation, adjust it to suit different operators, or completely repurpose it for a new use. 5

6 Motion, Page 24 Intermittent Stopper for Small Load L Intermittent Stopper for Small Load L Fixed Length (l=800>a>230mm) GFK-925

7 Aluminum Pipe Structural Overall Contents GF-N GF-G GF-S 28 mm Type 43 mm Type 19 mm Type Frame P.08~ P.08~ P.20~ P.21~ Part GF-N P.10~ GF-S P.22~ Foot Component Part GF-N P.15~ GF-G P.20~ Corocon GF-N P.18~ Moving Part GF-N P.19~ GF-S P.23~ Motion P.24~ Other P.25~ 7

Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Frame Φ38 PVC

with Green Frame N GF 28 mm Φ38 PVC Pipe L = 100-4000mm GFA-820

Steel Weight : 108 g Hexagon High Bolt M6x18 Hexagon High Bolt

Please apply oil when using for movement.

Due to the square shape of the neck it can only be moved in a

The Free remains adjustable even when the bolt is tightened.

M6 The neck has a square shape Square GFJ-B91 How to Differentiate

97 g Strength Data Sliding Load : 1000(N) Moment Load (vertical) :

8 Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Frame Φ38 PVC Pipe Material : Polyvinyl Chloride Weight : 518 g/m Compatible with Green Frame N GF 28 mm Φ38 PVC Pipe L = mm GFA-820 Free Inner Type V-M1 Material : Body: Aluminum Die-Cast Bolt/Nut: Steel Weight : 108 g Hexagon High Bolt M6x18 Hexagon High Bolt M6x18 Capable of gripping a GF-G (43mm) frame. Please apply oil when using for movement. Free determination of the mounting angle. Due to the square shape of the neck it can only be moved in a fan-shape. The Free remains adjustable even when the bolt is tightened. Free Inner Type V-M1 Hexagon High Nut M6 Ball Φ21 Hexagon High Nut M6 The neck has a square shape Square GFJ-B91 How to Differentiate Point Cross Hexagon Aluminum High Bolt M6.5 x 18 Hexagon Aluminum Tapered Nut M6.5 Material : Body: Aluminum Die-Cast Bolt/Nut: Aluminum Weight : 97 g Strength Data Sliding Load : 1000(N) Moment Load (vertical) : 15(N m) Moment Load (horizontal) : 26(N m) Torque:11(N m) Use in conjunction with the Cross (GFJ-A11 A). The Point Cross reinforces the connection between the frame and the orthogonally connected Cross (GFA-A11A). Point Cross Use with the Cross (GFJ-A11 A) 8 GFJ-D02

GF-N 28 mm Straight Outer Type Hexagon Socket Aluminum High Bolt M6.5 x 22 Hexagon Aluminum Tapered Nut M6.

420(N) without screw Moment Load : 5(N m) GF Motion Recommended screw: Pan Head Drill Screw (SFB-X96) 4 x 10 (trivalent chromium plating).

Φ35 is recommended for punching holes. Please use this to increase pulling power.

Bolt M6.5 x 22 Hexagon Aluminum Tapered Nut M6.

(horizontal) : 5.5(N m) Tightening Torque : 11(N m) The frame can be fixed at any point of rotation.

Also capable of connecting GF-G (43mm) frame. Recommended screw: Pan Head Drill Screw (SFB-X96) 4 x 10 (trivalent chromium plating).

9 GF-N 28 mm Straight Outer Type Hexagon Socket Aluminum High Bolt M6.5 x 22 Hexagon Aluminum Tapered Nut M6.5 Material : Body: Aluminum Die-Cast Bolt/Nut: Aluminum Weight : 38 g GF-G 43 mm GF-S 19 mm Strength Data Pull-Out Load : 1000(N) with screw Pull-Out Load : 420(N) without screw Moment Load : 5(N m) GF Motion Recommended screw: Pan Head Drill Screw (SFB-X96) 4 x 10 (trivalent chromium plating). GF Other Use when connecting with the end of a frame. Attaching the drill screw to the recessed part will prevent the frame from coming out. Φ35 is recommended for punching holes. Please use this to increase pulling power. Straight Outer Type GFJ-D13 Index Contact Multi (Outer) R Material : Body: Aluminum Die-Cast Bolt/Nut: Aluminum Weight : 51 g 強 Hexagon Socket Aluminum High Bolt M6.5 x 22 Hexagon Aluminum Tapered Nut M6.5 Strength Data Sliding Load : 800(N) Pull-Out Load : 1200(N) with screw Pull-Out Load : 300(N) without screw Moment Load (vertical) : 11(N m) Moment Load (horizontal) : 5.5(N m) Tightening Torque : 11(N m) The frame can be fixed at any point of rotation. Use on frames that are not compatible with inner type connectors. Attaching the screw drill to the recessed part will prevent the frame from coming out. Φ35 is recommended for punching holes. Please use this to increase pulling power. Also capable of connecting GF-G (43mm) frame. Recommended screw: Pan Head Drill Screw (SFB-X96) 4 x 10 (trivalent chromium plating). Multi (Outer) R GFJ-D17 Frame Frame Foot Component Corocon Straight Inner The Straight (GFJ-A17, 10 mm) dimensions are different. Material : Body: Aluminum Die-Cast Bolt/Nut: Aluminum Weight : 63 g Moving Part Hexagon Aluminum High Bolt M6.5 x 18 Hexagon Aluminum Tapered Nut M6.5 Strength Data Pull-Out Load : 420(N) Moment Load : 5(N m) Tightening Torque : 11(N m) Use when connecting with the end of a frame. Straight Inner GFJ-D01 9

Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type GF

Weight : 3 g This cap can only be used with Green Frame

GF 28 mm GF Hard Frame Inner Cap GFA-425 GF-SF Long Green

41g (S Slot Long Kit) 47g (S Slot Long G Kit) 59g (L Slot

refer to the SF Catalog The GF-SF connector remains

SF Frame GF-SF Long S Slot Long Kit S Slot Long G Kit L

head Hexagon socket head S Slot Long cap bolt M6x10 cap

cap bolt M6x14 Easy Nut S (M6) Easy Nut S (M6) Easy Nut L

: ABS Weight : 59 g (1,550mm) May also be used with GF-G

10 Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type GF Hard Frame Inner Cap Material : Low Density Polyethylene Weight : 3 g This cap can only be used with Green Frame Hard (GFF-019). GF 28 mm GF Hard Frame Inner Cap GFA-425 GF-SF Long Green Frame Material : Body: Aluminum Bolt/Nut : Steel Weight : 41g (S Slot Long Kit) 47g (S Slot Long G Kit) 59g (L Slot Long G Kit) For more information on SF frames, please refer to the SF Catalog The GF-SF connector remains adjustable even after tightening the bolts. SF Frame GF-SF Long S Slot Long Kit S Slot Long G Kit L Slot Long G Kit GFA-615 GFA-617 GFA-613 Hexagon socket head Hexagon socket head S Slot Long cap bolt M6x10 cap bolt M6x10 S Slot Long G L Slot Long G Hexagon socket head cap bolt M6x14 Easy Nut S (M6) Easy Nut S (M6) Easy Nut L (M6) Plate Cover L=1,550mm Plate Cover Plate Base Material : ABS Weight : 59 g (1,550mm) May also be used with GF-G (43mm type) Frame This type of cover snaps into place on the frame profile notches Plate Cover L=1,550mm 10 GFA-807 Plate Base Plate Cover

GF-S 19 mm GF Motion GF Other Use the part

connector to the frame and then attach the

bolt M6 x 30 Washer Resin Idler Material :

Wire Support x 1 Washer x 1 Piece Compact

11 Parts Container GF-N 28 mm GF-G 43 mm Material : Polypropylene Weight : 100 g GF-S 19 mm GF Motion GF Other Use the part connector to hook onto Green Frame F35/F50. Parts Container GFA-A50 Index Contact Parallel Flat Outer Material : Polypropylene Weight : 4 g Products Included M5 Square Nut Attach this connector to the frame and then attach the panel. Parallel Flat Outer GFJ-B49 Frame Foot Component Steel Idler Support Kit B Corocon Moving Part Piece Compact Side Spacer Wire Support Hexagon socket head bolt M6 x 30 Washer Resin Idler Material : Body: Stainless Piece : Aluminum Extrusion Idler/Bolt/Washer : Steel Weight : 91 g Load Capacity : 200N Products Included Wire Support x 1 Washer x 1 Piece Compact Side x 1 Bolt x 1 Resin Idler x 1 Spacer x 1 This is a convenient kit for using the Iron Idler (GFW-239). Steel Idler Support Kit B GFK

Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Resin Idler Support Kit A Material : Body:

Steel Weight : 56 g Load Capacity : 30N Hexagon Socket head bolt M6 x 30 Washer Products Included

is a convenient kit for using the Resin Idler (GFA-A30).

Material : Body: Stainless Piece: Aluminum Extrusion Idler: Resin Bolt/Washer: Steel Weight : 56 g

Washer x 1 Piece Compact Side x 1 Bolt x 1 Resin Idler x 1 Spacer x 1 Resin Idler This Resin

when this claw damages the anodized coating and contacts the aluminum material beneath.

Put in between Frame and to maintain the performance of the conductivity area.

12 Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Resin Idler Support Kit A Material : Body: Stainless Compact Piece Spacer Wire Support Piece: Aluminum Extrusion Idler: Resin Bolt/Washer: Steel Weight : 56 g Load Capacity : 30N Hexagon Socket head bolt M6 x 30 Washer Products Included Wire Support x 1 Washer x 1 Piece Compact x 1 Bolt x 1 Resin Idler x 1 Spacer x 1 Resin Idler This is a convenient kit for using the Resin Idler (GFA-A30). Resin Idler Support Kit A GFK-959 Resin Idler Support Kit B Compact Side Piece Spacer Wire Support Material : Body: Stainless Piece: Aluminum Extrusion Idler: Resin Bolt/Washer: Steel Weight : 56 g Load Capacity : 30N Hexagon socket head bolt M6 x 30 Washer Products Included Wire Support x 1 Washer x 1 Piece Compact Side x 1 Bolt x 1 Resin Idler x 1 Spacer x 1 Resin Idler This is a convenient kit for using the Resin Idler (GFA-A30). Resin Idler Support Kit B GFK-960 Leak Plate (50 pcs/pack) Leak Plate Leak Plate Conductivity can occur when this claw damages the anodized coating and contacts the aluminum material beneath. Material : Stainless Weight : 0.20 g/ea. Put in between Frame and to maintain the performance of the conductivity area. The drawing above shows conductivity in the frame using two leak plates. Moreover, it can go to ground from any frame when using the Ground Cable Kit. Leak Plate (50 pcs/pack) GFK-E00 12

Green Frame (L=4,000mm) x 5 pcs Material : Aluminum Extrusion

37 kg/m Section Secondary Momentum: Section Coefficient: lx=1.

83x10³mm³ GF-N 28 mm GF-G 43 mm GF-S 19 mm GF Motion This is the

It is the most versatile 28mm type which combines functionality

Green Frame 5 pcs/pack (Silver) Scale (effective length l=4000mm)

(GFA-412) Inner Cap Conductive (GFA-411) Outer Cap (GFA-401) Metal

Frame End Cap (Red) (GFA-432) GF Other Index Contact GFK-F00 Hinge

Stainless Weight : 123 g Products Included T Nut S (M5) x 2 Truss

the Resin Door Panel. This is an illustration of Hinge P-R.

GFP-004 M6x12 Low head bolt T Nut S (M6) This drawing is L (when

For R (when opening from the right) the drawing will be opposite.

Body: Aluminum Extrusion Pin: Stainless Weight : 144 g Moving Part

13 Green Frame (L=4,000mm) x 5 pcs Material : Aluminum Extrusion Alumite Treatment Weight : 0.37 kg/m Section Secondary Momentum: Section Coefficient: lx=1.16x10⁴mm⁴ ly=1.16x10⁴mm⁴ Zx=0.83x10³mm³ Zy=0.83x10³mm³ GF-N 28 mm GF-G 43 mm GF-S 19 mm GF Motion This is the standard frame of the GF series. It is the most versatile 28mm type which combines functionality and strength. Green Frame 5 pcs/pack (Silver) Scale (effective length l=4000mm) x 5 pcs Effective Length Standard scale showing the effective length. Corresponding Frame Caps Inner Cap (GFA-400) Inner Cap Hard (GFA-412) Inner Cap Conductive (GFA-411) Outer Cap (GFA-401) Metal End Face Cap (GFA-414) Green Frame End Cap (Gray) (GFA-427) Green Frame End Cap (Red) (GFA-432) GF Other Index Contact GFK-F00 Hinge P-L / R Hinge P-L Material : Body: Aluminum Extrusion Pin: Stainless Weight : 123 g Products Included T Nut S (M5) x 2 Truss Head Screw M5 x 12 (trivalent chromate) x 2 This hinge is used in the Resin Door Panel. This is an illustration of Hinge P-R. Hinge P-L Hinge P-R 2-M5x12 Truss Screw T Nut S (M5) GFP-000 GFP-004 M6x12 Low head bolt T Nut S (M6) This drawing is L (when opening from the left). For R (when opening from the right) the drawing will be opposite. Frame Foot Component Corocon Hinge F-L / R Hinge F-L Material : Body: Aluminum Extrusion Pin: Stainless Weight : 144 g Moving Part Products Included T Nut S (M6) x 2 Truss Head Screw M6 x 12 (trivalent chromate) x 2 This hinge is used with the Frame + Door Frame. This is an illustration of Hinge F-R. Hinge F-L Hinge F-R GFP-005 GFP M6x12 Low head bolt T Nut S (M6) This drawing is L (when opening from the left). For R (when opening from the right) the drawing will be opposite. 13

Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type GF Slip-joint Hinge L / R Material : Body:

This is an illustration of GF Slip-Joint Hinge R.

Frame Pillar This drawing is L (when opening from the left).

Green Frame G Catch for Frame with Switch The installation kit includes a magnet catch switch for

4N Switch Spec: ON when closing door Hexagon Socket Button Bolt 6x20 2-M4x22 Bolt M6x12 Low Head

Material Magnet: Body Ferrite : Stainless Housing: Piece: PBT Aluminum Extrusion Weight Idler :

Compliant Load Limit Plate Capacity L x 1 : 30N Includes Catch Piece L x 1 : Wire Support x 1

Compact x 1 Cross recessed countersunk Bolt x 1machine screw M6 20 (trivalent Resin chromate)

(trivalent chromate) x 2 Hex Nut M6 (Type 1) (trivalent chromate) x 3 Hex Nut M6 (Type 3)

Hexagon Nut Please use with a Frame Catch Catch for Frame with Switch GFQ-004 Φ48 Wire Support

14 Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type GF Slip-joint Hinge L / R Material : Body: Aluminum Extrusion Pin : Stainless Weight : 90 g Use as a hinge in a door. Use with an area guard. This is an illustration of GF Slip-Joint Hinge R. GF 28 mm GF Slip-joint Hinge L GF Slip-joint Hinge R GFP-012 GFP-013 Green Frame Vertical Door Frame Pillar This drawing is L (when opening from the left). For R (when opening from the right) the drawing will be opposite. Green Frame G Catch for Frame with Switch The installation kit includes a magnet catch switch for the door frame. Magnet suction force is 29.4N Switch Spec: ON when closing door Hexagon Socket Button Bolt 6x20 2-M4x22 Bolt M6x12 Low Head Bolt Hexagon Nut Thin Type Material Material/Technical : Install Area: Data Aluminum Extrusion Material Magnet: Body Ferrite : Stainless Housing: Piece: PBT Aluminum Extrusion Weight Idler : 195 g : Resin Bolt/Washer : Steel Weight Products Included : 56 g Environment Piece L x : 4RoHS Compliant Load Limit Plate Capacity L x 1 : 30N Includes Catch Piece L x 1 : Wire Support x 1 Magnet Catch w/ Limit Washer x1 x 1 Hexagon Socket Bolt M4x22 (trivalent Piece chromate) x 2 Compact x 1 Cross recessed countersunk Bolt x 1machine screw M6 20 (trivalent Resin chromate) Idler x 1 2 Hexagon Socket Button Spacer Bolt M6x20 x 1 (trivalent chromate) x 1 Flat Washer M4 (trivalent chromate) x 2 Hex Nut M6 (Type 1) (trivalent chromate) x 3 Hex Nut M6 (Type 3) (trivalent chromate) x 1 Hexagon Socket Bolt M6x12 (trivalent chromate) x 1 2-M6x20 Flat Bolt Hexagon Nut Please use with a Frame Catch Catch for Frame with Switch GFQ-004 Φ48 Wire Support Kit Wire Material : Body/Nut: Stainless Bolt/Washer: Steel Weight : 30 g Products Included Φ48 Wire Support x 1 Flat Washer M6 small, round x 1 Hexagon Socket Head Bolt M6x30 x 1 ST Nut L (M6) x 1 This support kit prevents the φ48 Idler from coming off. Φ48 Idler not included. Φ48 Wire Support Kit GFK

L Slot Piece L50mm Material : Body: Aluminum Extrusion Bolt: Steel Weight : 41 g GF-N 28 mm GF-G 43 mm GF-S 19 mm 2-MS Taper hole Products Included L Slot Piece L50 x 1 Hexagon Socket Head Bolt

L Slot Piece L50mm GFA-B37 Hexagon Socket Bolt M5x15 L Slot Piece L50 T Nut L (MS) Index Contact Frame Caster Φ100 Foot Component Frame Caster Thin Spanner for Caster Material/Technical Data Material

15 L Slot Piece L50mm Material : Body: Aluminum Extrusion Bolt: Steel Weight : 41 g GF-N 28 mm GF-G 43 mm GF-S 19 mm 2-MS Taper hole Products Included L Slot Piece L50 x 1 Hexagon Socket Head Bolt M5x15x 2 T Nut L (M5) x 2 GF Motion GF Other Installation of multi connector etc. can be done by inserting the Long Type (50mm) into the groove of the L slot. L Slot Piece L50mm GFA-B37 Hexagon Socket Bolt M5x15 L Slot Piece L50 T Nut L (MS) Index Contact Frame Caster Φ100 Foot Component Frame Caster Thin Spanner for Caster Material/Technical Data Material : Body: Steel Material Body: Aluminum Extrusion Wheel: Rubber Pin : Stainless Size : φ100 Weight : 90 g Weight : 650g (GFN-506) 719g (GFN-505) Load Capacity : 500N Spanner Size : 21 L : 47mm H : 132mm E : 32mm Insert into the Frame directly and tighten with a Thin Spanner. The resin will crimp to the Frame to lock in place. Frame Caster Φ100 with Brake Frame Caster Φ100 Compatible Frames Green Frame (GFF-000) Green Frame F35 (GFF-014) Green Frame F50 (GFF-005) Green Frame W (GFF-003) Green Frame Slide (GFF-006) Green Frame P100 (GFF-001) Frame GFN-505 GFN-506 Foot Component Free Caster Φ75 with Brake (Rubber) Corocon Moving Part Thin Spanner for Caster Material : Body: Steel Wheel: Rubber Size : φ75 Weight : 352g Load Capacity : 400N Spanner Size : 21 L : 47mm H : 101mm E : 29mm Insert into the frame directly and tighten with a Thin Spanner. The rubber will crimp to the frame to lock in place. Frame Caster Compatible Frames Green Frame (GFF-000) Green Frame F35 (GFF-014) Green Frame F50 (GFF-005) Green Frame W (GFF-003) Green Frame Slide (GFF-006) Green Frame P100 (GFF-001) Free Caster Φ75 with Brake (Rubber) GFN

Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Foot Component Frame Caster Φ75 (Conductive) Thin Spanner for Caster Material

into the Frame directly and tighten with a Thin Spanner. The rubber will crimp to the Frame to lock in place.

(GFF-005) Green Frame W (GFF-003) Green Frame Slide (GFF-006) Green Frame P100 (GFF-001) GFN-530 Free / Fixed Casters Φ75 Free

Socket Head Cap Bolt M8x15 (SFB-581S) Flat Washer M8 small type (SFB-5M8S) 4 of each for each wheel Compatible Frame Green Frame L

Brake GFN-532 630 Fixed Caster Φ75 GFN-550 306 600N Rubber Free Caster Φ75 (Urethane) GFN-540 610 55 42 70 58 93 8.

Φ75 Example of Installation using Adjuster Caster Urethane Conductive Foot Material : Body: Steel Compatible s Foot M12 (GFN-E02)

installation of a Foot or Adjustor Caster, etc.

16 Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Foot Component Frame Caster Φ75 (Conductive) Thin Spanner for Caster Material : Body: Steel Wheel: Conductive Size : Φ75 Weight : 316g Load Capacity : 240N Spanner Size : 19 L : 47mm H : 101mm E : 29mm Insert into the Frame directly and tighten with a Thin Spanner. The rubber will crimp to the Frame to lock in place. Frame Caster Free Caster Φ75 (Conductive) Compatible Frames Green Frame (GFF-000) Green Frame F35 (GFF-014) Green Frame F50 (GFF-005) Green Frame W (GFF-003) Green Frame Slide (GFF-006) Green Frame P100 (GFF-001) GFN-530 Free / Fixed Casters Φ75 Free Caster Fixed Caster Material : Body: Steel Install in Green Frame L Slot with the T Nut and Bolt: ST Nut L M8 (SKF-T11S) Hexagon Socket Head Cap Bolt M8x15 (SFB-581S) Flat Washer M8 small type (SFB-5M8S) 4 of each for each wheel Compatible Frame Green Frame L Slot (GFF-004) Item Weight (g) Load Capacity Wheel Material X (mm) Y (mm) A (mm) B (mm) H (mm) P (mm) E (mm) Free Caster Φ75 with Brake GFN Fixed Caster Φ75 GFN N Rubber Free Caster Φ75 (Urethane) GFN Free Caster Φ75 with Brake (Urethane) GFN N Urethane Fixed Caster Φ75 (Urethane) GFN Screw Shaft Casters Φ75 Example of Installation using Adjuster Caster Urethane Conductive Foot Material : Body: Steel Compatible s Foot M12 (GFN-E02) Foot M12 (Conductive) (GFN-E17) Adjuster Caster A (GFN-C08) Adjuster Caster B (GFN-C09) Palette (GFJ-A13) This Caster is for the installation of a Foot or Adjustor Caster, etc. Item Weight (g) Load Capacity Wheel Material L (mm) H (mm) E (mm) Screw Shaft Caster Φ75 (Urethane) GFN Screw Shaft Caster Φ75 with Brake (Urethane) GFN N Urethane Screw Shaft Caster Φ75 (Conductive) GFN N Conductive

Foot Component Free Caster Φ100 (Conductive) GF-N 28 mm GF-G 43 mm Data Material : Body: Body Steel : Steel Wheel: Conductive : Conductive Weight : 1054 g : 1054 g : RoHS Caster Compliant : without

Free Caster Φ100 (Conductive) GFN-546 For installation in the Green Frame L Slot: ST Nut L M8 (SKF-T11S) Hexagon Socket Head Cap Bolt M8x18 (SFB-589S) Flat Washer M8 (SFB-903S) Spring Washer M8

Green Frame (GFF-000) Green Frame F35 (GFF-014) Green Frame F50 (GFF-005) Green Frame W (GFF-003) Green Frame Slide (GFF-006) Green Frame P100 (GFF-001) Insert into the Frame directly and tighten

Item D (mm) Wheel Material Load Capacity L (mm) H (mm) E (mm) Weight (g) Frame Caster N Frame Φ50 Elastomer with Brake GFN-656 Φ50 Elastomer 300N 38.

5 97 220 Frame Caster N Frame Φ100 Conductive No Brake GFN-584 Conductive 500N 590 Frame Caster N Frame Φ100 Nylon with Brake GFN-587 Φ100 Nylon 600N 58.5 127.

Insert into the Frame directly and tighten with a Thin Spanner. The rubber will crimp to the Frame to lock in place. This has the same mounting method as the Frame Caster.

17 Foot Component Free Caster Φ100 (Conductive) GF-N 28 mm GF-G 43 mm Data Material : Body: Body Steel : Steel Wheel: Conductive : Conductive Weight : 1054 g : 1054 g : RoHS Caster Compliant : without Brake Load Caster Capacity : 720N : without Brake X : 68mm Y : 68mm A : 90mm B : 90mm H : 132mm P : 11mm E : 35mm GF-S 19 mm GF Motion GF Other Install with a T Nut and bolt to the Green Frame L Slot. Free Caster Φ100 (Conductive) GFN-546 For installation in the Green Frame L Slot: ST Nut L M8 (SKF-T11S) Hexagon Socket Head Cap Bolt M8x18 (SFB-589S) Flat Washer M8 (SFB-903S) Spring Washer M8 (SFB-934S) 4 of each for each wheel Compatible Frame Green Frame L Slot (GFF-004) Index Contact Frame Caster N Frame Material : Body: Steel, Rubber Spanner Size : 21 Thin Spanner Compatible Frames Green Frame (GFF-000) Green Frame F35 (GFF-014) Green Frame F50 (GFF-005) Green Frame W (GFF-003) Green Frame Slide (GFF-006) Green Frame P100 (GFF-001) Insert into the Frame directly and tighten with a Thin Spanner. The resin will be crimped to the Frame to lock in place. Item D (mm) Wheel Material Load Capacity L (mm) H (mm) E (mm) Weight (g) Frame Caster N Frame Φ50 Elastomer with Brake GFN-656 Φ50 Elastomer 300N Frame Caster N Frame Φ75 High Load with Brake GFN-658 Rubber 600N Φ75 28 Frame Caster N Frame Φ75 Nylon No Brake GFN-578 Nylon 400N Frame Caster N Frame Φ100 Conductive No Brake GFN-584 Conductive 500N 590 Frame Caster N Frame Φ100 Nylon with Brake GFN-587 Φ100 Nylon 600N Frame Frame Caster N Frame Φ100 Urethane with Brake GFN-589 Urethane 600N 570 Corocon Moving Part Frame Caster Fixed Φ50 Rubber Caution: A connector cannot be installed in this area. Insert into the Frame directly and tighten with a Thin Spanner. The rubber will crimp to the Frame to lock in place. This has the same mounting method as the Frame Caster. Material/Technical Data Data Material : Body: Body Steel, Rubber : Steel Wheel: Wheel Rubber : Conductive Weight : 193 g : 1054 g : RoHS Load Compliant Capacity : 300N Spanner Caster Size : 21 : without Brake Length : 34.4mm Height : 74mm Removing the washer (t = 4 mm) will result in a height of 70 mm. Compatible Frames Green Frame (GFF-000) Green Frame F35 (GFF-014) Green Frame F50 (GFF-005) Green Frame W (GFF-003) Green Frame P100 (GFF-001) Foot Component Frame Caster Fixed Φ50 Rubber GFN

Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Adjustor with Non-slip M8 Foot

The installation part and the knob can rotate separately.

When you wipe off the anti-slip seat portion, some lubricant remains.

26 g Load Capacity : 490N GF 28 mm Adjustor with Non-slip M8 GFN-009 Corocon

Stainless Steel Weight : 1.23 kg/m Please order in increments of 50mm.

Corocon Hook C (GFC-249) Corocon Hook D (GFC-250) Corocon Hook (Aluminum) (GFC-200)

Corocon (Adjustable Cut) l=300~2950mm (in 50mm increments) GFC-003 Corocon Hook

Material : Body: SPHC Screw: Resin, Steel Weight : 195 g Due to the oily nature of

18 Aluminum Pipe Structural GREEN FRAME GF-N 28 mm Type Adjustor with Non-slip M8 Foot Component This Adjustor has an anti-slip seat. The installation part and the knob can rotate separately. Therefore it is possible to adjust while installing. When you wipe off the anti-slip seat portion, some lubricant remains. Material : Screw: SUS304 Seat: POM Non-Slip Seat: Transparent Polyurethane Weight : 26 g Load Capacity : 490N GF 28 mm Adjustor with Non-slip M8 GFN-009 Corocon Corocon (Adjustable Cut) Material : Frame: Steel Wheels: Polypropylene Pin: Stainless Steel Weight : 1.23 kg/m Please order in increments of 50mm. Corresponding Corocon Hooks Corocon Hook A (GFC-247) Corocon Hook B (GFC-248) Corocon Hook C (GFC-249) Corocon Hook D (GFC-250) Corocon Hook (Aluminum) (GFC-200) Distance between the center of each wheel is 50mm. Corocon (Adjustable Cut) l=300~2950mm (in 50mm increments) GFC-003 Corocon Hook Conductive A Corocon Hook Conductive Leak Plate Earth Cable Kit Thumb Screw Material : Body: SPHC Screw: Resin, Steel Weight : 195 g Due to the oily nature of the trivalent chromate treatment, there may be some variation in the product, but this does not affect quality. Corresponding Corocons Corocon 3323P37 Conductive (GFC-033) Corocon 3620P50 Conductive (GFC-021) Hexagon Nut 18 Corocon Hook Conductive A GFC-222

Linear Bush Moving Part Material : Body: Aluminum Extrusion Guide: Resin

Adjust the looseness by tightening or loosening the bolt.

Stainless Steel Weight : 20 g/m Do not apply a tensile strength of more

Please cut off the end of the wire as the length provided by the factory

Use a Wire Cutter or Swaging Tool to cut the wire.

Corocon Moving Part Green Frame L Slot Bearing Color Material : Body:

19 Linear Bush Moving Part Material : Body: Aluminum Extrusion Guide: Resin Bolt: Steel Weight : 61 g GF-N 28 mm GF-G 43 mm GF-S 19 mm GF Motion Adjust the looseness by tightening or loosening the bolt. GF Other Linear Bush GFJ-B30 Index Contact Φ2 Wire 5m Material : Stainless Steel Weight : 20 g/m Do not apply a tensile strength of more than 50kg to the wire. Please cut off the end of the wire as the length provided by the factory will be slightly longer than the length described. Use a Wire Cutter or Swaging Tool to cut the wire. Φ2 Wire 5m l=5m GFW-249 Frame Foot Component Slot Roller L40 Light Corocon Moving Part Green Frame L Slot Bearing Color Material : Body: Nylon6 Bearing: Steel Weight : 59 g Load Capacity : 15 kg/ea. Tightening Torque : 6.0N m This Roller has a groove for a Green Frame L Slot or SF Frame s L Slot. Slot Roller L40 Light SFA

Aluminum Pipe Structural GREEN FRAME GF-G 43 mm

Aluminum Die-Cast Bolt/Nut: Steel Weight : 244 g

Multi Outer Type GH GFJ-031 Foot Component Frame

Spanner Material : Body: Steel, Rubber Wheel:

Length : 57mm Height : 155mm E : 39mm Compatible

(GFF-207) Green Frame G P150 (GFF-201) Insert

20 Aluminum Pipe Structural GREEN FRAME GF-G 43 mm Type Multi Outer Type GH Material : Body: Aluminum Die-Cast Bolt/Nut: Steel Weight : 244 g GF 43 mm 19 mm This strengthens the moment load. Multi Outer Type GH GFJ-031 Foot Component Frame Caster G Frame Φ125 Conductive with Brake Thin Spanner Material : Body: Steel, Rubber Wheel: Urethane Weight : 740 g Load Capacity : 700N Length : 57mm Height : 155mm E : 39mm Compatible Frames Green Frame G (GFF-200) Green Frame GW (GFF-207) Green Frame G P150 (GFF-201) Insert into the Frame directly and tighten with a Thin Spanner. The rubber will crimp to the Frame to lock in place. Frame Caster G Frame Φ125 Conductive with Brake GFN

Socket Head Cap Bolt M5x15 Hexagon Nut M5

Bolt/Nut: Steel Weight : 19 g GF-G 48 mm

Index 45-Degree (Outer) S GFJ-035 Contact

21 GREEN FRAME GF-S 19 mm Type GF-N 28 mm 45-Degree (Outer) S GFS Frame Hexagon Socket Head Cap Bolt M5x15 Hexagon Nut M5 Material : Body: Aluminum Die-Cast Bolt/Nut: Steel Weight : 19 g GF-G 48 mm GF-S 19 mm GFS Frame GF Motion GF Other Index 45-Degree (Outer) S GFJ-035 Contact 45-Degree Outer Type N-S GFN Frame Hexagon Socket Head Cap Bolt M5x15 Hexagon Nut M5 Material : Body: Aluminum Die-Cast Bolt/Nut: Steel Weight : 22 g GFS Frame 45-Degree Outer Type N-S Creates a 45-Degree angle between a GF-S (19mm) Frame and a GF-N (28mm) Frame 45-Degree Outer Type N-S GFJ-036 Foot Component Cross Rotate Type S Moving Part GFS Frame Material : Body: Aluminum Extrusion Bolt/Nut: Steel Weight : 38 g Cross Rotate Type S Center of rotation GFS Frame The Cross Rotate Type S makes it possible to connect frames at a free angle Cross Rotate Type S GFJ-B77 21

Aluminum Pipe Structural GREEN FRAME GF-S 19 mm Type Folding S Hexagon Socket Head Cap Bolt M5x35 Material : Body: Aluminum Die-Cast Pin: Steel Weight :

2 (N m) GF 19 mm In addition to folding tables, this Folding can be used as a link in karakuri automation units.

Folding S GFJ-D10 Pin S Hexagon Socket Head Cap Bolt M5x12 Hexagon Nut M5 Material : Body: Aluminum Die-Cast Bolt/Nut/Bearing: Steel Weight : 40 g

2 (N m) Please do not use as a cantilever (a frame supported at only one end). Allows for smooth rotation of the frame into which it is inserted.

22 Aluminum Pipe Structural GREEN FRAME GF-S 19 mm Type Folding S Hexagon Socket Head Cap Bolt M5x35 Material : Body: Aluminum Die-Cast Pin: Steel Weight : 37 g Strength Data Pull-Out Load : 190 (N) Moment Load : 1.2 (N m) GF 19 mm In addition to folding tables, this Folding can be used as a link in karakuri automation units. In cases of repetitive motion, please apply lubricant to the hinge. Folding S GFJ-D10 Pin S Hexagon Socket Head Cap Bolt M5x12 Hexagon Nut M5 Material : Body: Aluminum Die-Cast Bolt/Nut/Bearing: Steel Weight : 40 g Strength Data Sliding Load : 500 (N) Pull-Out Load : 190 (N) Moment Load : 2.2 (N m) Please do not use as a cantilever (a frame supported at only one end). Allows for smooth rotation of the frame into which it is inserted. Please support the frames at both ends. A Thin Spanner 12 x 14 (GFG-075) is required to secure this connector. Pin S GFJ-D06 Panel Holder S (t=3) Resin Panel (t=3) Panel Holder S (t=3) Material : Polypropylene Weight : 56 g/m For more information on panels, please see the GF Digital Catalog online at GFS Frame Attach the panel holder to the frame and then insert the panel. 22 Panel Holder S (t=3) Fixed Length (l=2000mm) GFA-815G

Cable Lock S GF-N 28 mm GF-G 48 mm Material : Polypropylene Weight :

the frame, insert the cable into the grove at the top and secure

Cable Lock S GFE-013 GFS Frame GF Other Index Contact Board Holder S

Material : Aluminum Extrusion Weight : 7 g When using an ST Nut, use

1 x 32 (SFB-9C5) Flat Washer M4 (SFB-9H2S) Use this part to install

By changing the orientation of the Board Holder S, it can support

Board Holder S Moving Part Flat Washer M4 Round Wood Screw Moving

Stainless Weight : 45 g Strength Data Load Bearing Capacity : 100N

23 Cable Lock S GF-N 28 mm GF-G 48 mm Material : Polypropylene Weight : 1.8 g GF-S 19 mm Cable Lock S GF Motion Attach the Cable Lock S to the frame, insert the cable into the grove at the top and secure with a tie. Cable Lock S GFE-013 GFS Frame GF Other Index Contact Board Holder S Outer Part Inner Part Flat Washer M4 Frame Guard S Flat Washer M4 Material : Aluminum Extrusion Weight : 7 g When using an ST Nut, use ST Nut SS. Related Parts Frame Guard S (GFA-813G) Round Wood Screw 4.1 x 32 (SFB-9C5) Flat Washer M4 (SFB-9H2S) Use this part to install a working board to the frame. By changing the orientation of the Board Holder S, it can support either an Outer or an Inner Frame Guard S Board Holder S GFJ-B97 Board Holder S Moving Part Flat Washer M4 Round Wood Screw Moving Part Antiback S Material : Body: Aluminum Extrusion Bolt: Steel Pin: Stainless Weight : 45 g Strength Data Load Bearing Capacity : 100N Sliding Load : 250N Allows movement in only one direction. When movement is attempted in the opposite direction, the mechanism locks and does not allow the movement. Antiback S GFK-N27 23

Foot pedal, idler, wire, etc. are not included.

24 Aluminum Pipe Structural GREEN FRAME GF Motion Motion Intermittent Stopper for Small Load L Escape Finger Stop Roller Piece Compact L Clamp Ring Please specify the length of a when ordering. L-dimension (a 55mm) is the size of the container. Foot pedal, idler, wire, etc. are not included. Intermittent Stopper for Small Load L Fixed Length (l=800>a>230mm) GFK-925 Piece Compact L Escape Finger Stop Roller Piece Compact L This image is of the R Type Clamp Ring Piece Compact L (Left) Piece Compact L (Right) GFW-316 GFW

25 GREEN FRAME GF Other GF-N 28 mm GF Handy Cutter Sliding Block GF-G 48 mm Weight : 22.0 g GF-S 19 mm GF Motion GF Other GF Handy Cutter Sliding Block GFG-029 Index Contact Spare Blade Kit (3 piece set) Weight : 36.0 g Products Included Replacement Blades for Tube Cutter x 3 Cutter Wheel Pin x 3 E. Ring x 3 Use with the Handy Cutter. Spare Blade Kit (3 piece set) GFK

26 Index List (Numerical / Alphabetical) Page Page G GFA-425 GF Hard Frame Inner Cap 10 GFA-613 GF-SF Long L Slot Long G Kit 10 GFA-615 GF-SF Long S Slot Long Kit 10 GFA-617 GF-SF Long S Slot Long G Kit 10 GFA-807 Plate Cover L=1,550mm 10 GFA-815G Panel Holder S (t=3) 22 GFA-820 Φ38 PVC Pipe 8 GFA-A50 Parts Container 11 GFA-B37 L Slot Piece L50mm 15 GFC-003 Corocon (Adjustable Cut) 18 GFC-222 Corocon Hook Conductive A 18 GFE-013 Cable Lock S 23 GFG-029 GF Handy Cutter Sliding Block 25 GFJ-031 Multi Outer Type GH 20 GFJ Degree (Outer) S 21 GFJ Degree Outer Type N-S 21 GFJ-B30 Linear Bush 19 GFJ-B49 Parallel Flat Outer 11 GFJ-B77 Cross Rotate Type S 21 GFJ-B91 Free Inner Type V-M1 8 GFJ-B97 Board Holder S 23 GFJ-D01 Straight Inner 9 GFJ-D02 Point Cross 8 GFJ-D06 Pin S 22 GFJ-D10 Folding S 22 GFJ-D13 Straight Outer Type 9 GFJ-D17 Multi (Outer) R 9 GFK-801 Spare Blade Kit (3 piece set) 25 GFK-925 Intermittent Stopper for Small Load L 24 GFK-956 Φ48 Wire Support Kit 14 GFK-958 Steel Idler Support Kit B 11 GFK-959 Resin Idler Support Kit A 12 GFK-960 Resin Idler Support Kit B 12 GFK-E00 Leak Plate (50 pcs/pack) 12 GFK-F00 Green Frame (L=4,000mm) x 5 pcs 13 GFK-N27 Antiback S 23 GFN-009 Adjustor with Non-slip M8 18 GFN-506 Frame Caster Φ GFN-526 Screw Shaft Caster Φ75 (Conductive) 16 GFN-527 Free Caster Φ75 with Brake (Rubber) 15 GFN-530 Frame Caster Φ75 (Conductive) 16 GFN-532 Free Caster Φ75 with Brake 16 GFN-533 Free Caster Φ75 with Brake (Urethane) GFN-537 Screw Shaft Caster Φ75 (Urethane) 16 GFN-540 Free Caster Φ75 (Urethane) 16 GFN-541 Screw Shaft Caster Φ75 with Brake (Urethane) GFN-546 Free Caster Φ100 (Conductive) 17 GFN-550 Fixed Caster Φ75 16 GFN-551 Fixed Caster Φ75 (Urethane) 16 GFN-578 GFN-584 GFN-587 GFN-589 GFN-605 Frame Caster N Frame Φ75 Nylon No Brake Frame Caster N Frame Φ100 Conductive No Brake Frame Caster N Frame Φ100 Nylon with Brake Frame Caster N Frame Φ100 Urethane with Brake Frame Caster G Frame Φ125 Conductive with Brake GFN-621 Frame Caster Fixed Φ50 Rubber 17 GFN-656 GFN-658 Frame Caster N Frame Φ50 Elastomer with Brake Frame Caster N Frame Φ75 High Load with Brake GFP-000 Hinge P-L 13 GFP-004 Hinge P-R 13 GFP-005 Hinge F-L 13 GFP-007 Hinge-F-R 13 GFP-012 GF Slip-Joint Hinge L 14 GFP-013 GF Slip-Joint Hinge R 14 GFQ-004 Catch for Frame with Switch 14 GFW-249 Φ2 Wire 5m 19 GFW-316 Piece Compact L (Left) 24 GFW-317 Piece Compact L (Right) 24 SFA-809 Slot Roller L40 Light 19 S GFN-505 Frame Caster Φ100 with Brake 15

27 GF-N 28 mm GF-G 48 mm GF-S 19 mm GF Motion GF Other Index Visit our interactive showroom. Contact SUS today to set an appointment. Contact To place an order, or for more information, please Brummel Avenue, Elk Grove Village, IL TEL FAX Website

28 1822 Brummel Avenue, Elk Grove Village, IL TEL FAX GF-USA-002

TECHNICAL INFORMATION

TECHNICAL INFORMATION Model No. Description SP6000 Plunge Cut Circular Saw 165mm (6-1/2") CONCEPT AND MAIN APPLICATIONS Model SP6000 is the first Makita plunge cut saw. Features great conveniences such