Microswitch - SERIES MP500
|
|
|
- Thomas Howard
- 5 years ago
- Views:
Transcription
1 Microswitch - SERIES MP500 MP500 A subminiature microswitch of standardized small dimensions. The MP500 Series provides long mechanical service, small differential travel and wide temperature range up to 105 C. 64
2 Description C000 : Solder Lugs Use flexible wires. Prevent moving wire to protect solder joint. Prevent any overheating of the solder lugs as this could damage the microswitch. Limit temperature of solder iron to 340 C max. Apply iron for maximum 4 seconds and use solder wire without chlorine. C001 : PCB Connection C100 : PVC potted cable 65
3 Description MP500 Approval EN VAC/5A cycles EN VAC/2A cycles UL VAC/5A cycles UL VAC/2A cycles Resistive load Housing Plastic reinforced with glass fiber (PA 6T/66) Pin Button PES Membrane Fluorosilicone Switching Circuit Change over - snap action with blade spring in copper/beryllium and stainless steel spring Contact Silver - optional gold Connection Cable PVC -20 C to +105 C PCB -40 C to +105 C Solder Lugs -40 C to +105 C Actuator Stainless steel Degree of Protection Housing IP67 / IP40 Connection Cable IP67 PCB IP00 Solder Lugs IP00 Class of Protection Micro-switching Distance between Contacts Dimensions II μ 0.40 mm DIN , form B 20 x 16 x 6.5 mm Actuation Force 0.6 to 2.5 N, depending on the lever Differential Travel 0.05 mm Temperature Range EN C to +105 C UL C to +105 C Cable selection may reduce temperature range Mechanical Life 10 x 10 6 cycles 66
4 Actuator Type L00 : Basic switch - Pin Button Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 9.3 ± ± 0.2 Operating Position Pa (mm) 9.0 ± ± 0.2 Differential Travel sd max. (mm) Type L70 : Simple Lever - position A Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 12.0 ± ± 0.4 Operating Position Pa (mm) 10.6 ± ± 0.4 Over-Travel sr min. (mm) Differential Travel sd max. (mm) Type L71 : Simple Lever - position B Type L80 : Simple Lever with Roller - position A Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 10.3 ± ± 0.4 Operating Position Pa (mm) 9.7 ± ± 0.4 Differential Travel sd max. (mm) Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 17.2 ± ± 0.4 Operating Position Pa (mm) 16.0 ± ± 0.4 Over-Travel sr min. (mm) Differential Travel sd max. (mm)
5 Actuator Type L81 : Simple Lever with Roller - position B Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 15.7 ± ± 0.4 Operating Position Pa (mm) 15.1 ± ± 0.4 Differential Travel sd max. (mm) Type L85 : Simple Lever with simulated Roller- position A Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 14.7 ± ± 0.4 Operating Position Pa (mm) 13.5 ± ± 0.4 Over-Travel sr min. (mm) Differential Travel sd max. (mm) Type L86 : Simple Lever with simulated Roller - position B Actuating Force Fa max. (N) Release Force Fr min. (N) Free Position Pr (mm) 13.2 ± ± 0.4 Operating Position Pa (mm) 12.6 ± ± 0.4 Differential Travel sd max. (mm)
6 Version light force : MP520/MP570 For applications requiring a light actuating force, for example pressure switches, the offers a version with a modified spring force. All other parameters - dimension, electrical rating and IP protection remain unchanged. Version IP40 MP550/MP570 For applications where IP protection is not an issue, the offers a version without the sealing membrane. Electrical Circuit Connection Code Circuit Color - Code Solder Lugs PCB PVC Cable C10. / C20. C000 C Black 2 - Grey 4 - Blue 69
7 Ordering Information MP L70 - C100 Housing 0 : IP67 2 : IP67 Low force 5 : IP40 7 : IP40 Low force Contact 0 : Silver Contact 1 : Gold Contact Actuator 0 : Basic switch - Pin Button L70 : Simple Lever - position A L71 : Simple Lever - position B L80 : Simple Lever with Roller - position A L81 : Simple Lever with Roller - position B L85 : Simple Lever with simulated Roller - position A L86 : Simple Lever with simulated Roller - position B Connection C000 : Solder Lugs 250VAC/5A C001 : PCB 250VAC/5A C100 : Cable PVC, 3x0.25mm 2, 250VAC 2A 0.5 (m) C101 : Cable PVC, 3x0.25mm 2, 250VAC 2A 1 (m) C102 : Cable PVC, 3x0.25mm 2, 250VAC 2A 2 (m) C200 : Cable PVC, 3x0.50mm 2, 250VAC 5A 0.5 (m) C201 : Cable PVC, 3x0.50mm 2, 250VAC 5A 1 (m) C202 : Cable PVC, 3x0.50mm 2, 250VAC 5A 2 (m) 70
Microswitch - SERIES MP110
Microswitch - SERIES MP0 Description MP0 Approval EN 6058-50VAC/5A 50 000 cycles EN 6058-00VAC/0A 50 000 cycles UL 6058-50VAC/5A 50 000 cycles UL 6058-00VAC/0A 50 000 cycles Resistive load MP0 Sealed basic
MICROSWITCH SERIE MP110
1 / 7 Home Home About us History Quality Products Microswitches / Limit switch LED 's Metal Foil Resistors News PressRelease enewsletter Contacts Corporate Offices Distributors / Representatives Download
SERIES MP110 & DERIVATIVES
MP110 MICROSWITCHES MP110 microswitches are snapaction changeovers, simple switching action. Connections: Pushon clips 6.35 x 0.8mm Plugin system of connection MP100.. Protective terminal covers MP110Z..
SERIES MINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V
02/11/2015
V4 8318 Sealed Dual-current 83181 Part number made to order IP 67 protection Nominal ratings 0.1 A to 10 A / 250 VAC Minimum rating 1 ma / 4 VDC Operating temperature -40 C to +125 C Choice of actuators
SUB-SUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.CROUZET.COM MICROSWITCHES /8 SUB-SUBMINIATURE MICROSWITCHES - SEALED V5S - 83 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating
Snap-action Microswitches Subminiature V4N
Snap-action Microswitches Subminiature V4N V4N Characteristics Peg mounting option Solder terminals 2.8 mm faston (quick connect) terminals PC terminals Sealed (IP 67) / unsealed (IP 40) Pre-wired option
SERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
Sealed limit switches. If your application depends on it SERIE MP700
Microswitches and sealed position switches If your application depends on it SERIE MP700 Plastic or metal case IP67 protection 30 mm or 35 mm case width Wide temperature range Sealed limit switches Serie
SERIES MP720 & DERIVATIVES
MP720 SEALED POSITION SWITCH WITH POSITIVE OPENING OPERATION OVERMOULDED CABLE - DEGREE OF PROTECTION IP67 The MP720 positive opening position switch is a dependent-action, changeover, double-gap, contact
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
Miniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
Product features. Mechanical life endurance
H Series 10 - Subsubminiature snap-action switches ip 67 Product features Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for
MINIATURE MICROSWITCHES - STANDARD
0/08 MINIATURE MICROSWITCHES - STANDARD VD - 8 C-spring snap-action mechanism with wiping contacts Ratings from 0.0 A Vc up to A 0 Va and hp Va / hp 0 Va Broad range of operating forces from 0. N to N
Ordering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 26 & 18 - MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals
D2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
SOLDER SHORT SOLDER SCREW
32 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945. CUT-A-WAY V3 MINIATURE BASIC SWITCH GENERAL INFORMATION V3 miniature basic switches feature high electrical capacity
Subminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
MASTER CATALOG Switches
MASTER CATALOG Switches QUALITY IN A Global Marketplace Cherry has been the leader in switch innovation since its inception in 1953. To better serve our customers in today s global marketplace, we now
Interactive Catalog Replaces Catalog Pages
Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes
S870, S970 Series. Snap-action switches. Positive opening operation Self-cleaning contacts Catalogue D70.en
Snap-action switches S870, S970 Series Snap-action switches Positive opening operation Self-cleaning contacts Catalogue D70.en Snap-action switches S870/S970 Series Single break SPDT switches with positive
SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
series Micro-signal switches
Product features Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3
SERIES SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67
SERIES 10 - SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67 PRODUCT FEATURES Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for
SERIES Z/T236. Safety-Rated, Positive-Break Miniature DIN Limit Switches. Features & Benefits. Description. Typical Applications ORDERING GUIDE
SERIES Z/T23 Safety-Rated, Positive-Break Miniature DIN Limit Switches Features & Benefits Positive-Break NC contacts won t stick or weld shut. Watertight design meets IP washdown requirements. Rugged,
Table of Contents. Johnson Electric Group 2 Group. Looking for a specialized switch solution 4. Table of typical applications & Saia switch types 8
Table of Contents Johnson Electric Group 2 Group Looking for a specialized switch solution 4 Table of typical applications & Saia switch types 8 Terminology 9 Microswitches 18 Subminiature XC, X4, V4N,
Multiple Lever Types. Proximity Limit Switch. Circuitry. The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous
Proximity Limit Switch The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous metals. All components are sealed and protected within the rugged brass housing eliminating
Microswitches M series
Microswitches M series Technical data Housing Made of glass-reinforced polymer, self-extinguishing, shock-proof thermoplastic resin. Protection degree: IP40 (with protection art. VF C0) IP0 (with protection
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
MASTER CATALOG. Switches
MASTER CATALOG Switches QUALITY IN A Global Marketplace Cherry has been the leader in switch innovation since its inception in 1953. To better serve our customers in today s global marketplace, we now
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
Microswitches MK series
Microswitches MK series Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with
S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
KWG145 SERIES. Lightly geared limit switch in Plastic housing. For Industrial, Crane s and Lockings. Product description.
For Industrial, Crane s and Lockings Easy Limit Switch up to 5 Channels Different micro switches Free programmable cams Protection class IP64 Protection against contact Product description Heavy duty geared
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
Prewired position switches FF series
2 Prewired position switches FF series Distributed buy Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable
Accessories (additional charge):
Alurail With Alurail, BOPLA has developed a modular DIN rail enclosure which is especially suitable for use in measurement, control and automatic control technology. Basic profiles, each in eight standard
Compact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Microswitches MK Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Miniaturized limit switches
Miniaturized limit switches Selection diagram Actuators 04 0 06 Thermoplastic Bodies M3 Contact blocks NONC 1NO+1NC snap action Cable entry With screw 290 GENERAL CATALOGUE miniaturized limit switches
l Snap-Action Switches
Connect - Contact - Control 2 Brochure l Snap-Action Switches Snap-action switches I Page 2 Page 3 I Snap-action switches Double Safety A sky diver's life depends on his equipment. In case of emergency
Manual pneumatic operated valves for fixed installations, CO2 and inert gases. Series B0430
Manual pneumatic operated valves for fixed installations, CO2 and inert gases B B0430 Working pressure p max. 250 bar Temperature range - 20 C + 60 C Seat orifice size 12 mm Material Valve body brass Inlet
Microswitches MK series
D Microswitches MK series Introduction Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica (cross-reference at page
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
Limit switches LIMIT SWITCHES. Rotary Gear product description. Potentiometer & Encoder. Ratio
Limit switches Rotary Gear product description Rotary Gear Limit switches page 6 to 35 The Giovenzana s rotary gear limit switch is a device used to control the number of rotation or direction angle of
D2SW-P. Sealed Subminiature Basic Switch. Ordering Information D2SW-P
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
General_technical_data Series
Emergency-stop Switching system The double-break switching system can be supplied for the following switching functions: 1 Normally closed, 2 Normally closed, 1 Normally closed + 1 Normally open. The Normally
Position switches FR series
Position switches FR series Selection diagram 0 A 08 0-0 A A 0 A external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket external rubber gasket
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
Gross Automation (877)
Limit Switches Carlo Gavazzi broadens its leading range of products for the industrial automation world, with the new and complete range of mechanical limit and safety switches. These robust switches provide
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
Prewired position switches FF series
2 Prewired position switches FF series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45 46
Position switches FR series
Position switches FR series Selection diagram 01 A1 08 14 01-7 0 A 05 A5 external rubber gasket external rubber gasket for electrical panels external rubber gasket external rubber gasket 0 1 5 34 50 33
S880 Series Snap-action switches with positive opening operation and self-cleaning contacts Catalogue D80.en
Snap-Action Switches S880 Series Snap-action switches with positive opening operation and self-cleaning contacts Catalogue D80.en Snap-action switches, S880 Series The world s smallest snap-action switch
MICRO SWITCH ESS SERIES
MICRO SWITCH ESS SERIES FEATURES Small compact size suitable for electric equipment appliances and P.C.B. layout 2-piece spring mechanism design offering durable acute operation and long life Heavy/Light
Flow switches for insertion installation
Flow switches for insertion installation Threaded adapter with trimmable paddle Type VHS06 Type VK306 Technical data VHS06 VK306 Switching function Contact closes at increasing flow opens at decreasing
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
D2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information
Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional models, contributing
LK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
Other Information. Section 6. Contained in this section: Actuator Diaphragm Identification. How To Order. Facts and Recommended Guidelines
Section 6 Other Information Contained in this section: How To Order Maintenance Instructions Flange Gasket and Storage Recommendations Actuator Diaphragm Identification Facts and Recommended Guidelines
SNAP ACTION SWITCHES type SAS-00, SAS-03
EN 60947-5- SNAP ACTION SWITCHES type SAS-00, SAS-03 SAS 00 and 03 Series snap-action switches have one NO and one NC contacts. The change of the switching position is realized by the mechanism, which
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
SL1Series. Compact Horizontal Limit Switches
Compact Horizontal Limit Switches SL1Series Mechanical life of 0 million operations. Robust long-life and maintenance-free compact horizontal-type limit switches with IP67 seal. Mechanical life exceeds
Limit Switch Type 4747
Limit Switch Type 4747 Ex d flameproof enclosure with inductive or mechanical contacts for linear actuators or rotary actuators acc. to VDI/VDE 3845 General The Type 4747 Limit Switch issues an electrical
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
TABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24
1 TABLE OF CONTENTS Push Button and Rocker Switches Pag. 4 Signal Lights and Lenses Pag. 14 Pressure Switches Pag. 24 2 Push button and Rocker Switches 3 Switches Push button SERIES L4 L4 Bowl L4 Rubber
ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
TF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
PARTS LIST
20150522 PARTS LIST TABLE OF CONTENTS Overview_UNO 1 El-box_UNO 3 El-box L_UNO 5 Motor pump 7 Cylinder head 9 Unloader PA 11 Default accessories 13 OVERVIEW_UNO 20150505 20150505 2 3 1 6 34 33 5 32 4 7
Series 1. Series 1 Pressure Switch. Pressure Switches Inc. Quality Pressure Solutions. Pressure Switches 1 G 10 N Key Features.
Model 1A 1C 1G 1Z 1P 1H Inc. Series 1 Series 1 Pressure Switch High, Low, Differential & Vacuum Pressure Switch options available All Anodized Aluminum Construction Multiple s Available UL & cul Approved
Advantages. Options VHS06
Flow switches for insertion installation Threaded adapter with trimmable paddle Type VHS06 Type VK306 Technical data VHS06 VK306 Switching function Contact closes at increasing flow opens at decreasing
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch D2VW Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to
D2SW. Sealed Subminiature Basic Switch. Ordering Information Model Number Legend D2SW-
Sealed Subminiature Basic Switch Sealed Subminiature Basic Switch Conforming to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
VACUUM A RESOURCE FOR EVERYONE
Vacuum grippers VACUUM PRODUCTS INNOVATORS IN VACUUM TECHNOLOGY CATALOG VERSION 5.0 VACUUM A RESOURCE FOR EVERYONE www.piab.com Accessories Suction cups Vacuum pumps PVA VACUUM SWITCHES, INDUCTIVE UNIVERSAL
Switches with manual reset
Switches with manual reset Selection diagram 01-W 02-W 05-W 0-W -W -H0W 16-W 16-H0W Ø mm roller Ø mm roller Ø mm roller Ø mm roller 0-W 1-W 51-W 52-W 5-W 55-W -W adjustable lever safety adjustable lever
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
URDC-PV. Features and Benefits FUSES. URPV Fuses for PV Semiconductor Protection. gpv. Class: Voltage ratings: 600V DC to 1500V DC.
Fuses for PV Semiconductor Protection Class: gpv 0 Voltage ratings: 600V DC to 1500V DC Current ratings: 1 A to 450 A Standards: UL 2579 IEC 60 269-6 Approvals: E341342 E341490 Features and Benefits High
Transmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
D2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information
Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional, contributing to
Single foot switches - PX and PA series
Single foot switches - PX and PA series Description The PX and PA foot switches are traditional products of Pizzato Elettrica that have recorded a continuous growth and success in the market. Modified
HL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
Floor and fine adjustment switches
Floor and fine adjustment switches 6 Introduction 6-2 AS 1 6-3 ASH 2 6-4 AFH 2 6-5 Reference table technical data 6-6 Universal switches 6-7 Floor and fine adjustment switches / Introduction ➀ ➁ ➂ Floor
F E - Electromagnetic Safety Switch With Separated Actuator. 1 Code Construction. Casing: P: Plastic casing
Electromagnetic Safety Switch With Separated 1 Code Construction F E - Casing: P: Plastic casing Cable inlet: 5: 3 x (M20x1) Type of FEP: E: Electrical block ( b with excited ) M: Mechanical block ( b
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1