Underbody Deadener Heat Cure

Transcription

1 R y R Underbody Deadener AUTOMATIC SPRAY PrecisionFlo Solutions PrecisionFlo show with panel-mount controller View of PrecisionFlo Plus touch screen controller only Description Part No. Literature Technical Specifications Temperature Conditioned Models (select one): See page 50 for required and additional PrecisionFlo Plus, with touch screen controller accessories PrecisionFlo, with panel-mount controller Includes: dual filter bank, PrecisionFlo module, Designed for use with materials that require controller, temperature conditioner with controlled application temperatures ranging fluid hoses, and automatic airless dispense from F (16-66 C) valve with fan spray tip Max. inlet pressure: 3500 psi (24.1 MPa, 241 bar) Includes 5 in. (127 mm) x 60 in. (1.52 m) long heat exchanger for high flow rate applications Ambient Models (select one): See page 50 for required and additional with Knife Disconnect accessories PrecisionFlo Plus, with touch screen controller PrecisionFlo, with panel-mount controller with Rotary Disconnect PrecisionFlo Plus, with touch screen controller PrecisionFlo, with panel-mount controller Includes: dual filter bank, PrecisionFlo Designed for use with materials that module, controller, fluid hoses, and can be applied within low fluctuating automatic airless dispense valve with plant temperatures from F (21-35 C) fan spray tip Max. inlet pressure: 3500 psi (24.1 MPa, 241 bar) Heated Models (select one): See page 50 for required and additional PrecisionFlo Plus, with touch screen controller accessories PrecisionFlo, with panel-mount controller Includes: dual filter bank, 4-zone control Designed for use with materials that can panel, PrecisionFlo module, controller, be applied using heat only to condition heated fluid hoses, and heated automatic the material above the plant ambient airless dispense valve with fan spray tip temperature from F (32-66 C) Max. inlet pressure: 3500 psi (24.1 MPa, 241 bar) Note: when ordering a PrecisionFlo Plus metering package, a Robot Interface Kit is required. See page Rev. C Paint Shop 21

2 Underbody Deadener AUTOMATIC SPRAY shown Volume Verification Meter/Mastic Regulator Solutions VVM/Mastic Regulator, Simple On-Off robotic interface with constant Temperature Conditioned flow rate Includes: dual filter bank, temperature Settable volume verification conditioner with fluid hoses, mastic regulator Designed for use with materials that require with volume verification, and automatic airless controlled application temperatures ranging dispense valve with fan spray tip from F (16-66 C) Includes 5 in. (127 mm) x 60 in. (1.52 m) long heat exchanger for high flow rate applications VVM/Mastic Regulator, Ambient Simple On-Off robotic interface with constant Includes: dual filter bank, fluid hoses, flow rate mastic regulator with volume verification, Settable volume verification and automatic airless dispense valve with fan spray tip applied within low fluctuating plant temperatures from F (21-35 C) VVM/Mastic Regulator, Heated Simple On-Off robotic interface with constant Includes: dual filter bank, 4-zone control flow rate panel, heated fluid hoses, heated mastic Settable volume verification regulator with volume verification, and automatic airless dispense valve applied using heat only to condition the with fan spray tip material above the plant ambient temperature from F (32-66 C) 22 Paint Shop Rev. C

3 Underbody Deadener AUTOMATIC SPRAY shown Mastic Regulator Solutions Mastic Regulator, Simple On-Off robotic interface with constant Temperature Conditioned flow rate Includes: dual filter bank, temperature Designed for use with materials that require conditioner with fluid hoses, mastic controlled application temperatures ranging regulator, automatic airless dispense valve from F (16-66 C) and fan spray tip Max. fluid flow: 3000 cc/min. Includes 5 in. (127 mm) x 60 in. (1.52 m) long heat exchanger for high flow rate applications Mastic Regulator, Ambient Simple On-Off robotic interface with constant Includes: dual filter bank, fluid hoses, flow rate mastic regulator, automatic airless dispense valve and fan spray tip applied within low fluctuating plant temperatures from F (21-35 C) Max. fluid flow: 3000 cc/min. Mastic Regulator, Heated Simple On-Off robotic interface with constant Includes: dual filter bank, 4-zone control flow rate panel, heated fluid hoses, heated mastic regulator, automatic airless dispense valve applied using heat only to condition the and fan spray tip material above the plant ambient temperature from F (32-66 C) Max. fluid flow: 3000 cc/min Rev. C Paint Shop 23

4 Underbody Deadener BOOSTER PUMPS shown Booster Pump Modules Dual 45:1 Premier Booster Pumps Common material inlet Max. outlet pressure: 4500 psi (31.0 MPa, 310 bar) Dual 34:1 Premier Booster Pumps Common material inlet Max. outlet pressure: 3400 psi (23.5 MPa, 235 bar) Dual 56:1 King Booster Pumps Common material inlet King air motors dual King in-line pumps with Dura-Flo Triple 56:1 King Booster Pumps Common material inlet Includes: (1) triple pump stand assembly, King air motors triple King in-line pumps with Dura-Flo lowers, triple air motor air controls, Third pump is for spare Note: when inlet pressures exceed 25% of outlet pressure, apply standard mastic regulators to inlet ports. 24 Paint Shop Rev. C

5 Liquid Applied Sound Deadener BOOSTER PUMPS shown Booster Pump Modules Dual 45:1 Premier Booster Pumps Common material inlet Max. outlet pressure: 4500 psi (31.0 MPa, 310 bar) Dual 34:1 Premier Booster Pumps Common material inlet Max. outlet pressure: 3400 psi (23.5 MPa, 235 bar) Dual 56:1 King Booster Pumps Common material inlet King quiet air motors dual King in-line pumps with Dura-Flo Triple 56:1 King Booster Pumps Common material inlet Includes: (1) triple pump stand assembly, King quiet air motors triple King in-line pumps with Dura-Flo lowers, triple air motor air controls, Third pump is for spare Note: when inlet pressures exceed 25% of outlet pressure, apply standard mastic regulators to inlet ports Rev. C Paint Shop 25

6 Liquid Applied Sound Deadener MANUAL SPRAY shown shown (hose and gun not included) Manual Spray Dispense Kit Pistol Grip Manual Airless Spray Kit Max. fluid pressure: 5000 psi (34.5 MPa, 345 bar) Includes: ball valve, 3/8 in. mastic Pistol grip gun fluid inlet port: 1/4 npsm(m) regulator, 15 ft. (4.6 m) dispense hose, straight swivel and Silver Plus pistol grip airless spray gun with fan spray tip Regulator Stations Regulator Station, 3/8 in Max. fluid pressure: 5000 psi (34.5 MPa, 345 bar) Includes: ball valves, 3/8 in. mastic regulator, Utilizes regulator high pressure filter, and mounting bracket Hose and gun not included Regulator Station, 3/4 in Max. fluid pressure: 5000 psi (34.5 MPa, 345 bar) Includes: ball valves, 3/4 in. mastic regulator, Utilizes regulator high pressure filter, and mounting bracket Hose and gun not included 26 Paint Shop Rev. C