Contents Power Tools 2009 Type Page Type Page NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW FLEX-Elektrowerkzeuge GmbH ools 2009 er T Pow

Transcription

1 Power Tools 2009

2 Contents Type Page Type Page A AC 14,4 NEW 124 ACH 14,4 NEW 125 ADM ALC ALC ALi 10,8 B NEW 122 ALi 10,8 G 122 ALi 10,8 S 123 ALP 3 NEW 157 ALR AS 28 NEW 103 B BED BED BED BED BED BH 612 VR 140 BH 812 VV 140 BHI 822 VR 141 BHW 812 VV 141 BHW 1549 VR 142 BRL 3501 A 126 BSW 2123 C 145 BSW 3023 C 145 C CS 3455 A 114 CSM F F FS 3403 VRG 80 H H 1105 VE 22 H 1127 VE 22 H HPI L L 602 VR 48 L 602 VR-Set 48 L 1109 FE 11 L L 1501 VR 51 L 1503 VR 51 L 1506 VR 13 L 1710 FRA 15 L 2106 VC 16 L 2108 VC 17 L 3206 CD 19 L 3208 CD 19 L 3309/ L 3309 FR 12 L 3309 FRG 12 L 3403 VRG 49 L 3403 VRG-Set 49 L L 3406 VRG 15 L 3410 FR 14 L 3410 VR 14 L 3709/ L 3709/ L 3906 C 18 LBR 1506 VRA 32 LBS 1105 VE-Set 31 LD 1709 FR 75 LD 3206 C 75 LDC 1709 FR NEW 76 LG 1707 FR 16 LK LL 1107 VEA 42 LLK 1503 VR 34 LP 1503 VR-Set 30 LRP 1503 VRA 33 LST 803 VR 79 LST 1503 VR 79 M MS MS 1706 FR-Set 84 R R 500 FR 132 R 502 FR 132 R 600 VV 133 R 1800 VR 133 RZ 600 VV 134 S S S S 47 M 92 S 2902 VV-Basic 110 SBG 4908 NEW 113 SK 602 VV 112 SKE 2902 VV 110 SKL 2903 VV 111 SR 602 VV 112 ST 1005 VE 32 V VP W WD WS 702 VEA 66 WST 1000 FV NEW 74 WST 700 VV Vario NEW 64 WST 700 VV Vario-Plus NEW 65 X X 1107 VE 41 XC 3401 VRG 50 XC 3401 VRG-Set 50 XS

3 Product features The key features of our products are identified by the following symbols. Lithium-ion technology No self-discharging. No memory effect. FLEX Protection System: protects from overloading, overheating and deep discharge Carrying case Rugged metal or plastic case. Tool-free tool change Easy tool change without the need for additional tools. Spindle lock Push-button spindle-lock facilitates fast, easy disc change. Guard adjustment Tool-free guard adjustment from both sides. FixTec quick-lock nut Tool-free disc change. Patented guard adjustment Patented tool-free guard adjustment from both sides (Patent No. DE C1). Cable length Mains cable Saw blade pendulum action Pendulum action selectable. Useful for fast sawing in wood Cable length Mains cable with flex red plug Bail handle Additional bow handle for a more comfortable grip FR electronic control Tachogeneratorcontrolled constant speed, soft-start, overload protection. Side handgrip Hand grip optionally on left or right side. SoftVib hand grip Vibration cushioning hand grip, preventing strain on the wrists. VR electronic control Tachogenerator-controlled constant speed, soft-start, overload protection, speed selection with optimized low-speed range. VE electronic control Continuous speed selection and overload protection. Dust extraction Extractor connection VV electronic control Constant speed, softstart with continuous speed selection trigger and overload protection. Hook and loop fasteners Quick grip for attaching abrasives without adhesives or clamping. FV electronic control Constant speed, softstart and overload protection.

4 Contents 1 Page Chapter FLEX The Original Location Germany Angle grinders / straight grinders Angle grinders Accessories for angle grinders Straight grinders Accessories angle and straight grinders Surface finishing Metal surface finishing Accessories metal surface finishing Universal surface finishing Accessories universal surface finishing Polishers Polishers Accessories polishers Floor and wall finishing Wall and ceiling sanders Accessories wall and ceiling sanders Renovation sanders Accessories renovation sanders Bushhammers Scouring machines Accessories for scouring machines Wall chaser Accessories wall chasers Industrial vacuum cleaners Industrial vacuum cleaners Industrial vacuum cleaner accessories Cleaning technology Cleaning technology Accessories for cleaning systems Saws Sabre saws Band and circular saws Accessories saws Screwdrivers, drills, hammers Cordless machines, Hammer Drill Accessories for cordless power tools Mixers Mixing machines Accessories mixers Core drill technology Core drilling machines Blind hole drills Core drilling units Vacuum pump, water pressure tank Accessories core drill technology Measuring technology Laser measuring technology Accessories laser measuring technology Information Warranty FLEX Electronics FLEX Addresses

5 FLEX. The Original. 1922: MS 6 - the first production machine. The electric motor drove the tool through a flexible shaft. The FLEXible shaft gave the name to the brand: FLEX. For more than 85 years, the FLEX brand has been synonymous with innovative solutions. Our success is based on innovation. That was the case in 1922, when we developed hand-controlled tools powered by stationary electric motors through flexible shafts. It did not change in 1954, when we launched the first high-speed angle grinder, the DL 9 - inventing FLEXing in the process. To make our angle grinders even more reliable, effective, and user-friendly, we continued to develop them. In 1997 we were the first electric power tool manufacturer to introduce the long-neck sander for ceilings and walls the FLEX-Giraffe - and the latest Giraffe generation is now available. The WST 700 VV Vario-Giraffe, with its telescopic function interchangeable sanding heads, and perfect handling, sets new standards. In continuous dialogue with craftspeople and users from the industries we serve, backed by our many years of experience in the development and manufacture of professional electric power tools, we keep coming up with new, innovative solutions. With our tools and dedicated accessories, we continue to create solutions for better and more economical working. 1954: FLEX DL 9, the first high-speed angle grinder is presented to the trade world. Flexing revolutionizes hand crafts. 2002: FLEX launches the angle grinder generation for the 21st century. 2009: The new generation of the successful FLEX Giraffe is launched. With innovative telescopic function.

6 Professional tools for professionals. You need quality tools to do quality work. But what are quality tools? How do I recognise real quality? For FLEX it's the craftsman who sets the standard. That is why we visit those sites where tools are used when we develop new machines. On construction sites, in the shops and factories. And that's precisely where we determine the specifications that every FLEX must fulfil.this primarily includes the long life of our power tools and machines, their power and functionality and their design, ergonomics and safety. All this is made possible by the advanced technology that frequently provides new solutions to problems, revolutionizing the work procedures of entire industries. Our approach is justified by each of the millions of craftsmen who perform outstanding work using their FLEX every day. 1. FLEX product quality All FLEX power tools are CE-conformant and are subject to a professional quality management system as per DIN EN ISO 9001:2000 throughout their production. Our aim: 100 percent quality. We are so convinced of the quality of our products, that we give our customers a 2-year manufacturer's guarantee on every FLEX electric power tool and accessory. Whichever FLEX you buy: it represents the ultimate in user friendliness and durability. Perfectly balanced, easy to handle and extremely rugged. Try it out! Put a FLEX to the hardest of all tests: your own applications. We take our slogan: Quality tools from professionals for professionals seriously. 2. FLEX service quality Customer service takes top priority for us. FLEX therefore provides an expert all-round service. Our efficient Customer Service Centre is at your disposal, ready to answer all your questions about technical matters and accessories. If your FLEX needs servicing no problem: simply send your machine to our Service Centre, and we will perform the service and return your FLEX to you in no time. 3. FLEX loyalty to the trade FLEX is available only from specialist dealers for a good reason. Users who place high value on the quality and functionality of their power tools expect professional advice. And that is available only from specially trained and authorized dealers. Your FLEX specialist dealer has the perfect tool and accessories for your specific requirements.

7 We proud to have Steinheim as our production location. Maximum productivity and flexibility in our production heartland, Germany what many companies see as a contradiction is living reality for FLEX. By concentrating on our home location in Germany, we remain flexible and are able to react rapidly to the needs of the market and technological developments. Above all, it is our customers who count most in maintaining Germany as the production location. It is our customers who have the confidence that FLEX products meet the most stringent of quality requirements. These include highly qualified engineers and designers high innovativity many years of in-depth experience of our workforce highest standards in manufacture high productivity and quality process depth of manufacturing expertise Using state-of-the-art technology, our engineers develop power tools for the future. FLEX was and is the trademark for top technological performance, quality and reliability. Assembly of the individual components, including the housing, motor and electronic unit. 4

8 Productivity and flexibility. The heart beating in any original FLEX is created from the outset in our motor manufacturing plant in Steinheim. This is where we produce a wide range of electric motors, perfectly matched to customers needs. From the fully automated winding of the magnetic fields through our state-of-the-art powder-coating line to the precision lathe. The use of the latest manufacturing systems in motor production and steel and aluminium machining and the continuous quality controls in all other stages of production ensure our high quality standards. Our state-of-the-art processing machines guarantee a high degree of flexibility in manufacture and enable us to respond rapidly to customers wishes. Quality and functional checks during the entire manufacturing process are standard policy in our company. In our Research and Development Department, all new and existing products are tested on test stands and in continuous use to ensure they meet our quality and functional requirements.ongoing staff training is a fundamental requirement for us, to ensure that we remain able to apply the latest manufacturing technologies in the future. Maximum precision: anchors are fully machined in a single chucking operation. We produce key components and power tools at our facility in Steinheim. From conventional angle grinders to our latest products - the terso AS 28 cleaning machine and the WST 700 VV Vario-Giraffe. We procure outsourced parts primarily from suppliers within a short distance from us and also from competent manufacturers from all around the world. State-of-the-art five-axis machining centre: ultra-precision machining of gear housings. 5

9

10 Angle grinders / straight grinders 1 Professionals use a FLEX for flexible working. ThemostrecentexamplesfromFLEXdevelopmentshowthateventodaywesetthe standardsforanglegrinders.usingstate-of-the-arttechnology,maximumuser friendliness,andinnovativeproductfeatures:microprocessorelectronics,extensive protectionagainstabrasiveswarf,uniquecomfortdetailssuchasthesoftvib-handle, whichreducesvibrationlevelsbyupto0%.ortheflexmultigripsystemwiththe twostep-adjustablehandlesonthe2500wattredbearanglegrinder.andmuch, muchmore. FLEXsuppliesoneofthemostsophisticatedandinnovativeanglegrinderranges intheworld.andyouhaveinyourhandsthepowertoolsthatyouneedforperfect results. 7

11 Angle grinders / straight grinders Gearbox housing made of die-cast aluminium Light, sleek, robust. Spindle lock Double safety because of recessed design. FLEX SoftVib the multi-handle The vibration damping construction of the elastic body of the SoftVib-Handle reduces vibration levels noticeable. With built-in holding wrench - for exchanging the discs without additional tools. Patented safety disc guard Adjustable without tools, impossible to lose, with rotation lock. Perfection to the very last detail Highly flexible cable strain reliever prevents cable breakage. 4-metre power cable with FLEX-red plug. Intelligence meets durability Air vents to front Protects user and motor from abrasive swarf. Large ventilator Optimised in wind tunnel tests for maximum cooling. Winding protecting cage Rotating ribs prevent abrasive swarf from damaging the windings of the armature and provide for additional cooling. This extends the service life of the motor considerably. High-performance armature Sustained power and endurance, heat-resistance. Winding protected from aggressive swarf by a winding protecting cage. Quality auto-stop carbon brushes Protects the motor from damage. Microprocessor electronics Greater performance, safer, more convenience. FLEX-electronics: More power, safer, longer service life Four-fold microprocessor electronics: with consistent speed control, soft start, starter lock, and overload protection. Five-fold microprocessor electronics: with consistent speed control, soft start, starter lock, overload protection, and temperature monitoring. Six-fold microprocessor electronics: with consistent speed control, soft start, starter lock, overload protection, temperature monitoring, and speed selection set by an adjustment wheel. FLEX Performance: What is transfered to the disc is critical Outstanding output: thanks to complexly machined high-performance armature. High operating efficiency: great energy with cost- efficient operation. Best endurance run characteristics: due to high manufacturing precision. FLEX Ergo design: created for precise, low-fatigue work Optimal centre of gravity: precisely in the middle of the machine; finely balanced. Sleek motor housing with ergonomic, waisted grip depression. Structured surface*: no slipping, for a secure grip. (*on G versions with super-slender special rear grip)

12 Angle grinders / straight grinders FLEX-Multi-grip system Thefrontandrearvibrationcushioninggripscanbe adjustedinstepsupto10. L320CDanglegrinder FLEX SoftVib grip Withapatentedintegral pinwrench(patentno. DE A1)fortool lessdicschanging. 3 5 FixTec quick-action clamping nut Foraquick,tool-freedisc change:simplyopenthe clamp,pressthespindle lock,unscrewthefixtecnut anticlockwiseandchange thedisc.quickdiscchanging withoutadditionaltools Prepared for extreme conditions FLEXanglegrindersare optimallyprotectedfrom roughandconductiveswarf byapowdercoatingonthe magneticfields. 7 Reduced vibration Thevibrationdamping constructionoftheelastic bodyofthesoftvib-handle reducesvibrationlevels whencomparedtostandard handlebyupto0%.the handandarmjointsofthe useraresubjectedtoless stress

13 Angle grinders 1 L 3709/ L 3709/ watt angle grinder 800 watt angle grinder Extensive dust protection for motor and gears Lightweight, ergonomic design, short and handy Spindle lock Side handgrip Tool-free adjustment of safety guard Extensive dust protection for motor and gears Lightweight, ergonomic design, short and handy Spindle lock Side handgrip Tool-free adjustment of safety guard SPECIFICATIONS L 3709/115 Max. disc diameter 115 mm Speed without load rpm Power input 750 watt Power output 450 watt Tool fixture M 14 1,80 kg SPECIFICATIONS L 3709/125 Max. disc diameter 125 mm Speed without load rpm Power input 800 watt Power output 470 watt Tool fixture M 14 1,80 kg STANDARD EQUIPMENT 1 guard 115 Ø side handle STANDARD EQUIPMENT 1 guard 125 Ø side handle

14 Angle grinders L 3309/ L 1109 FE watt angle grinder with a low-profile gear head, 125 mm 1010 watt angle grinder, 125 mm Highly efficient and resilient motor for more power output Short, lightweight, ergonomic design for fatigue-free work Switch easily accessible from any position SoftVib handgrip with integrated, patented locknut spanner and vibration damping Patented (DE C1) tool-free adjustable safety guard Spindle lock Highly efficient and resilient motor for more power output FE full-wave electronics, featuring soft start, overload protection and constant speed control Side handle: can be used in 3 positions Handy, lightweight design Spindle lock SPECIFICATIONS L 3309/125 Max. disc diameter 125 mm Speed without load rpm Power input 710 watt Power output 420 watt Tool fixture M 14 1,90 kg SPECIFICATIONS L 1109 FE Max. disc diameter 125 mm Speed without load rpm Power input 1010 watt Power output 610 watt Tool fixture M 14 1,90 kg STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle STANDARD EQUIPMENT 1 guard 125 Ø handle pin wrench

15 Angle grinders 1 L 3309 FR L 3309 FRG watt angle grinder, 125 mm Super-slim 1010 watt angle grinder, 125 mm FR microprocessor control: tachogenerator constant speed control, soft start, restart protection after power failure, overload protection, temperature monitoring Highly efficient and resilient motor for more power output Lightweight, ergonomic design SoftVib handgrip with integrated, patented locknut spanner and vibration damping Patented (DE C1) tool-free adjustable safety guard Spindle lock FR microprocessor control: tachogenerator constant speed control, soft start, restart protection after power failure, overload protection, temperature monitoring Highly efficient and resilient motor for more power output Lightweight, ergonomic design Slender back stick handle: with dust-protected on/off switch located underneath, safety catch and lock SoftVib handgrip with integrated, patented locknut spanner and vibration damping Patented (DE C1) tool-free adjustable safety guard Spindle lock SPECIFICATIONS L 3309 FR Max. disc diameter 125 mm Speed without load rpm Power input 1010 watt Power output 610 watt Tool fixture M 14 1,90 kg SPECIFICATIONS L 3309 FRG Max. disc diameter 125 mm Speed without load rpm Power input 1010 watt Power output 610 watt Tool fixture M 14 1,90 kg STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle FixTec quick-clamp nut M STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle FixTec quick-clamp nut M

16 Angle grinders LK L 1506 VR watt sander for use with abrasive sanding discs, 175 mm 1200 watt angle grinder, 150 mm Highly efficient and resilient motor for more power output No guard needed when using the flexible backing pad Rubber rest bar protects machine and surface of workpiece Spindle lock Highly efficient and resilient motor for more power output VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection Spindle lock SPECIFICATIONS LK 604 Max. disc diameter 175 mm Speed without load 4000 rpm Power input 1200 watt Power output 720 watt Tool fixture M 14 3,20 kg SPECIFICATIONS Max. disc diameter Speed without load Power input Power output L 1506 VR 150 mm rpm 1200 watt 700 watt 1,90 kg STANDARD EQUIPMENT 1 side handle pin wrench flexible backing pad 170 Ø + clamping nut M grip cover STANDARD EQUIPMENT 1 side handle guard 125 Ø pin wrench grip cover clamping nut clamping flange hook and loop cup

17 Angle grinders 1 L 3410 FR L 3410 VR watt angle grinder, 125 mm Variable-speed 1400 watt angle grinder, 125 mm FR microprocessor control: tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring Highly efficient and resilient motor for more power output Lightweight, ergonomic design Capable of short sorce overloads up to 2200 watt SoftVib handgrip with integrated, patented locknut spanner and vibration damping Patented (DE C1) tool-free adjustable safety guard Spindle lock VR microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring Highly efficient and resilient motor for more power output Lightweight, ergonomic design - snug fit in the hand Universal machine with infinately adjustable speed for sanding, grinding, roughing, cutting, deburring, plaster removal or derusting SoftVib handgrip with integrated, patented locknut spanner and vibration damping Patented (DE C1) tool-free adjustable safety guard Spindle lock SPECIFICATIONS L 3410 FR Max. disc diameter 125 mm Speed without load rpm Power input 1400 watt Power output 880 watt Tool fixture M 14 2,20 kg SPECIFICATIONS L 3410 VR Max. disc diameter 125 mm Speed without load rpm Power input 1400 watt Power output 880 watt Tool fixture M 14 2,20 kg STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle FixTec quick-clamp nut M STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle FixTec quick-clamp nut M

18 Angle grinders L 1710 FRA L 3406 VRG watt angle grinder with the extra-slim gear head, 125 mm Variable-speed 1400 watt angle grinder, 125 mm FR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection Highly efficient and resilient motor for more power output Lightweight design with slimline gear head, ideally suited for use in inaccessible places SoftVib handgrip with integrated, patented locknut spanner and vibration damping Tool-free adjustment of safety guard Spindle lock VR microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring Highly efficient and resilient motor for more power output Switch: with lock-off / lock-on switch Lightweight, ergonomic design with slim grip Universal machine with infinately adjustable speed for sanding, grinding and polishing. For paint we recommend using the L 3403 VRG SoftVib handgrip with integrated, patented locknut spanner and vibration damping Tool-free adjustment of safety guard Spindle lock SPECIFICATIONS L 1710 FRA Max. disc diameter 125 mm Speed without load rpm Power input 1400 watt Power output 880 watt Tool fixture M 14 2,40 kg SPECIFICATIONS L 3406 VRG Max. disc diameter 125 mm Max. polishing pad diameter 160 mm Speed without load rpm Power input 1400 watt Power output 880 watt Tool fixture M 14 2,20 kg STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle STANDARD EQUIPMENT 1 guard 125 Ø SoftVib-Handle FixTec quick-clamp nut M

19 Angle grinders 1 LG 1707 FR L 2106 VC Powerful 1500 watt angle grinder, 180 mm 2000 watt two-handed angle grinder, 230 mm FR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection Highly efficient and resilient motor for more power output Sturdy, large gear unit for heavy-duty use and a long life Lightweight, ergonomic design with slim grip SoftVib handgrip with integrated, patented locknut spanner and vibration damping Spindle lock Highly efficient and resilient motor for more power output Electrical surge protection: for a soft start without power overloading Rugged metal composite housing for optimum heat dissipation Side handle: can be used in 3 positions Switch: with lock-off / lock-on switch Tool-free adjustment of safety guard Spindle lock SPECIFICATIONS LG 1707 FR Max. disc diameter 180 mm Speed without load 7500 rpm Power input 1500 watt Power output 1060 watt Tool fixture M 14 3,10 kg SPECIFICATIONS L 2106 VC Max. disc diameter 230 mm Speed without load 6000 rpm Power input 2000 watt Power output 1400 watt Tool fixture M 14 6,10 kg STANDARD EQUIPMENT 1 guard 180 Ø SoftVib-Handle STANDARD EQUIPMENT 1 guard 230 Ø side handle pin wrench

20 Angle grinders L 2108 VC watt two-handed angle grinder, 180 mm Highly efficient and resilient motor for more power output Electrical surge protection: for a soft start without power overloading Rugged metal composite housing for optimum heat dissipation Side handle: can be used in 3 positions Switch: with lock-off / lock-on switch Tool-free adjustment of safety guard Spindle lock FLEX-Metal composite housing A classic of sandwich construction design by FLEX: A tough, heat-resistant, light aluminium die-cast outer shell. On the inside a highly insulating plastic shell for electrical protection and motor noise reduction. Plus solid brass carbon brush holders for optimal heat dissipation. SPECIFICATIONS L 2108 VC Max. disc diameter 180 mm Speed without load 8500 rpm Power input 2000 watt Power output 1400 watt Tool fixture M 14 6,10 kg STANDARD EQUIPMENT 1 guard 180 Ø side handle pin wrench

21 Angle grinders 1 L 3906 C watt two-handed angle grinder, 230 mm Highly efficient and resilient motor for more power output Electrical surge protection: for a soft start without power overloading Optimized dust protection of the motor and the gearbox Switch: with lock-off / lock-on switch SoftVib grip for reduced vibration can be mounted in three positions. Rear shaft handle with soft padding for secure grip Tool-free adjustment of safety guard Spindle lock SPECIFICATIONS Max. disc diameter Speed without load Power input L 3906 C 230 mm 6500 rpm 2100 watt 5,80 kg STANDARD EQUIPMENT 1 SoftVib-Handle pin wrench guard 230 Ø 1 piece 18

22 Angle grinders L 3206 CD L 3208 CD Red Bear 2500 watt two-handed angle grinder, 230 mm Red Bear 2500 watt two-handed angle grinder, 180 mm Highly efficient and resilient motor for more power output Multi-grip system with vibration cushioning: front Soft-Vib hand grip can be adjusted in steps up to 180. With safety locking. For right and left handed cutting, rear handgrip rotates 2 x 90 Damping element seperates rear hand grip from motor, bringing significant reduction in vibration transmission Electrical surge protection: for a soft start without power overloading Gearbox: particularly flat and robust aluminium die-cast construction Tool-free adjustment of safety guard Spindle lock Highly efficient and resilient motor for more power output Multi-grip system with vibration cushioning: front Soft-Vib hand grip can be adjusted in steps up to 180. With safety locking. For right and left handed cutting, rear handgrip rotates 2 x 90 Damping element seperates rear hand grip from motor, bringing significant reduction in vibration transmission Electrical surge protection: for a soft start without power overloading Gearbox: particularly flat and robust aluminium die-cast construction Quick-release guard: tool-free adjustment Tool-free adjustment of safety guard Spindle lock SPECIFICATIONS L 3206 CD Max. disc diameter 230 mm Speed without load 6500 rpm Power input 2500 watt Power output 1700 watt Tool fixture M 14 6,20 kg SPECIFICATIONS L 3208 CD Max. disc diameter 180 mm Speed without load 8500 rpm Power input 2500 watt Power output 1700 watt Tool fixture M 14 6,00 kg STANDARD EQUIPMENT 1 guard 230 Ø SoftVib-Handle pin wrench STANDARD EQUIPMENT 1 guard 180 Ø SoftVib-Handle pin wrench

23 Accessories for angle grinders 1 Cutting discs and roughing discs Diamantjet - diamond cutting disc, standard, concrete Fast, long-life universal cutting disc, suitable for concrete and stone. 125 Ø x 22, Ø x 22, Diamantjet - diamond cutting disc, super premium, concrete Extremely fast, long-life precision cutting disc, suitable for cutting all construction materials, including concrete, granite and natural stone. Low-noise and transparent. 125 Ø x 22, Ø x 22, Diamantjet - diamond cutting disc, premium, tile Fast, long-life tile cutting disc with closed diamond segment. Suitable for cutting all tiles, marble, slate, granite and natural stone. Precision cutting and low-noise. 115 Ø x 22, Ø x 22, Metal cutting disc Offset, universal use for cutting metals. Long service life with fast cutting. 115 Ø x 3 x 22, Ø x 3 x 22, Ø x 3 x 22, Ø x 3 x 22, Straight, universal use for cutting metals. Long service life with fast cutting. 115 Ø x 3 x 22, Ø x 3 x 22, Ø x 3 x 22, Ø x 3 x 22, Straight, universal use for cutting metals. Long service life with fast cutting. 115 Ø x 2 x 22, Ø x 2 x 22, Ø x 2 x 22, Ø x 2 x 22, Thin cutting disc for stainless steel Straight, for fast low-force cutting. Millimetre-accuracy in cutting, low-burr to no-burr edges. 30% longer service life by packaging in stay-fresh can. 125 Ø x 1 x 22, Thin, tapered, cutting disc for stainless steel Straight, for safe, accurate cutting of stainless steel. Tapered disc shape ensures optimum cutting, no jamming. 30% longer service life by packaging in stay-fresh can. 125 Ø x 2/1 x 22,

24 Accessories for angle grinders Cutting and roughing disc for metal, stainless steel Offset, good cutting speed and material removal. For cutting and light roughing. 30% longer service life by packaging in stay-fresh can. 125 Ø x 2,5 x 22, Safety glasses Athletic safety glasses Trendy glasses in a sporty design with replaceable sunshades. The x-press-clip facilitates easy change of the shades. The wrap-around style provides optimum eye protection and a very wide field of vision. Includes grey replacement lenses. In case. 1 Standard roughing disc for metal Offset, hard universal disc for all metals, long service life. 125 Ø x 6 x 22, X-trend safety glasses Flap discs and polishing discs Flap disc for metal and stainless steel, cambered Ideal for flap-grinding steel and stainless steel, high material removal rate, guarantees effortless working without filling pores. Grit 115 Ø x 22,2 grit Ø x 22,2 grit Ø x 22,2 grit Ø x 22,2 grit Ø x 22,2 grit Ø x 22,2 grit Polishing flap wheel for metal and stainless steel, cambered X-one safety glasses With anatomically formed wrap-around lenses and 20% more cover than normal spectacles, these safety glasses provide a high degree of eye protection, together with 100% UV protection. In nylon pouch Sporty and affordable snug-fitting safety glasses, and weighing only 28 g Polishing fleece in fine, medium and course texture for efficient polishing of metals. Ideal for finishing of weld seams or for preparation of areas for painting. 125 Ø x 22, Polishing flap wheel Multitalent for corners and edges, perfectly follows the contours of the workpiece. Suitable for polishing stainless steel, steel, aluminium and NF-metals. 125 Ø x 22,2, fine Ø x 22,2, medium

25 Straight grinders 1 H 1105 VE H 1127 VE watt low-speed straight grinder 710 watt variable high-speed straight grinder VE electronic control: variable speed and overload protection Clamping collar: 40 mm diameter Machine length: approx. 330 mm Collar length: approx. 53 mm, for optimum handling and reaching into hard-to-access areas Suitable for fine grinding in mould construction, with pencil grinders and abrasive flap wheels up to max. 25 m/sec. VE electronic control: variable speed and overload protection Collar: 40 mm diameter, approx. 60 mm long Machine length: approx. 325 mm Long-necked design for optimum handling and reaching into hard-to-access areas Lightweight design for fatigue-free work SPECIFICATIONS H 1105 VE SPECIFICATIONS H 1127 VE Max. disc diameter resin/ceramic up to 30 mm Max. disc diameter resin/ceramic up to 30 mm Max. disc diameter fiber reinforced up to 50 mm Max. disc diameter fiber reinforced up to 50 mm Tool fixture 3, ¼", 6, 8 mm Tool fixture Ø 3, ¼", 6, 8 mm Speed without load rpm Speed without load rpm Power input 710 watt Power input 710 watt Power output 420 watt Power output 420 watt 2,10 kg 1,80 kg STANDARD EQUIPMENT 1 collet 6 mm Ø with clamping nut stopping claw SW open-ended wrench SW STANDARD EQUIPMENT 1 collet 6 mm Ø with clamping nut stopping claw SW open-ended wrench SW

26 Straight grinders H watt low-speed straight grinder Rugged metal composite housing for optimum heat dissipation Plastic grip guard: for safe working Switch: with lock-off / lock-on switch SPECIFICATIONS H 1206 Max. disc diameter resin/ceramic up to 150 mm Tool fixture M 20 Speed without load 5700 rpm Power input 1600 watt Power output 1040 watt 5,40 kg STANDARD EQUIPMENT 1 guard clamping discs open-ended wrench SW open-ended wrench SW 30/ hex. nut

27 Accessories angle and straight grinders 1 Velcro system 115 mm to 160 mm Ø for L 3406 VRG Velcro sanding pad M 14 Velcro sand paper 115 Ø Ø With rubber cushioning for uniform pressure distribution. 115 Ø Grit 115 Ø grit Ø grit Ø grit Brush for rust and paint removal for L 3406 VRG, L 1710 FRA Steel wire 0,3 mm Steel wire 0,5 mm Corrugated, mount M Ø Knot-type, mount M Ø Straight grinders: collets for H 1105 VE and H 1127 VE Velcro polishing sponge Velcro lambswool pad For repolishing. 120 Ø x For coarse, aggressive polishing and fast results. 120 Ø Collet With clamping nut. 3 Ø ¼" Ø Ø Ø Hook and loop pad, cushioned 12 mm cellular rubber pads ensure uniform pressure distribution when polishing and sealing. 125 Ø Hook and loop sponge, blue (hard) Sponge with high tensile strength and coarse foam structure for polishing surfaces. Particularly suitable for extremely weathered or dull painted surfaces in combination with Flex special sanding polish ( ). With centring hole, inner diameter 22 mm. 160 Ø x Hook and loop sponge, white (soft) Fine, soft and extremely highly tear-proof polishing sponge for treatment of paint or varnish in combination with FLEX Pro paint sealant ( ). With centring hole, inside diameter 22 mm. 160 Ø x

28 Accessories angle and straight grinders L 3709/L 3309 L 1109 FE L 1506 VR L 3410/L 3406 VRG L 1710 FRA LG 1707 FR L 2106 VC L 2108 VC L 3206 CD L 3208 CD L 3906 C 1 Cutting stones with diamond discs and dust extraction 125 mm cutting guard With guide block and 32 mm Ø extraction nozzle for cutting discs with 125 mm Ø for flange without groove. 125 Ø mm cutting guard For push and pull cuts with vacuum set and adjustable support, extraction nozzle with 32 mm outer Ø, collar Ø 62 mm, cut depth 65 mm max., for flange without groove. 230 Ø Vacuum hose 32 mm internal Ø, with snap coupling, 4.0 m long, temperature resistant to 70 C, incl. coupling bush for vacuum, filter-free switching module with snap coupling, vacuum hose extension, 32/28 mm adapter and universal adapter for S 36 and S 36 M Quick-clamp nut FixTec quick clamp nut M 14 For tool-free tool changes, approved for discs up to 150 mm Ø SDS-Clic quick-clamp nut Side handles SoftVib side handle with pin wrench SoftVib handle with integral, patented facepin wrench (DE A1) and vibration cushioning, significantly reducing the vibration transmitted to hands and arms. With built-in face-pin wrench for quick disc changing without additional tools SoftVib side handle SoftVib handle with vibration cushioning, significantly reducing the vibration transmitted to hands and arms and reducing the risk of vibration-related injury to the operator Carrying case Small metal carrying case For all angle grinders with disc Ø up to 125 mm Plastic multi-carrying case Perfect fitting, impact resistant carrying case, universally adaptable for many different FLEX- Maschines

29

30 Surface finishing 2 Brilliant for sanding and polishing. Whether on a flat or curved surface an angle or corner, the FLEX surface finishing range is always the right choice brilliant results. To make the job easier, the power tools and accessories are also bundled as practical PRO kits in the new FLEX toolboxes. 27

31 2 Polish and sand pipes much more quickly with the sanding boa. When applied the flexible sanding arm wraps itself around the pipe like a snake up to a radius of 270. Are you looking for the perfect finish on sensitive surfaces? With our special-purpose power tools, matching accessories and range of abrasives, we provide you with the ideal systems to achieve perfect results. Even difficult-to-reach places on welded pipe fabrications can be worked on with the pre-profiled sanding discs. LLK 1503 VR fillet weld grinder For balustrade work, tank construction and all surface processing, we have the right equipment. Our fillet weld grinder and our special finger sander help your reach the most difficult to access areas, for a perfect result every time. All power tools naturally feature speed control to ensure they always offer you optimum performance for your various applications. Your demand for quality of the finished product of your work is what drives us to develop our power tools, that make your work easier and give you a perfect finish. This rounds it off. Rubber drive roller and polishing fleece mirror-finish stainless steel guard-rails. Burnishing machine LP 1503 VR PROFI kit Burnish with ease with the rubber air roller. The air cushion adapts to any material contour. Burnishing machine LP 1503 VR PROFI set 28

32 Surface finishing 2 The specialist for larger pipe diameters. The sanding belt adapts itself to any curve up to 250 mm diameter. Weld seam and pipe belt sander LBR 1506 VRA Flounder instead of strenuous manual labour. Even when things get tight, the flounder can reach in everywhere under heaters too. Flat head grinder Flounder LL 1107 VEA Perfect for sanding weld seams. The circulating belt carries off the heat. That is how weld seams can be sanded down on stainless steel without tempering. Weld seam and pipe belt sander LBR 1506 VRA 29

33 Metal surface finishing LP 1503 VR-Set Burnishing machine set VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection Adjustable guard: for sanding tools up to Ø 115 mm Sanding tool replacement: tool-free with knurled screw Infinately adjustable speed for optimum finishing of various materials for burnishing, structuring, polishing, brushing, smoothing, de-rusting and deburring of steel and stainless steel surfaces. Machine without basic equipment: No SPECIFICATIONS Power input Power output Max. tool Ø Tool width Tool fixture Speed without load LP 1503 VR-Set 1200 watt 700 watt 115 mm 100 mm 19 mm rpm 3,10 kg Practical set Everything needed for universal application of the burnishing machine is clearly arranged in the case. Beyond that it provides sufficient room for additional accessories. STANDARD EQUIPMENT 1 air pump rubber air roller drive roller kit of distance rings fleece grit 280/ sanding sleeve, grit 60 1 piece of sanding sleeve, grit piece of sanding sleeve, grit piece of fleece sanding sleeve, K 180/ fleece sanding sleeve, K sanding-polishing sleeve, grit sanding-polishing sleeve, grit Velcro drive belts Velcro fleece belt A piece of Velcro sanding belts, grit pieces of Velcro polishing belt, grit piece of plastic carrying case with padding

34 Metal surface finishing LBS 1105 VE-Set Power file set Highly efficient and resilient motor for more power output VE electronic control: infinately adjustable belt speed Sanding head: rotates through 140. Fitted with two sanding arms: 9 mm and 30 mm Quick belt replacement system: for quick, tool-free belt replacement Machine only with 9 mm arm. No Swivelling sanding head The sanding head can be swivelled by 140. No matter how winding the steps are - they are polished off. SPECIFICATIONS Power input Power output Belt speed Belt dimensions LBS 1105 VE-Set 710 watt 420 watt 4-12 m/sec 533 x 4-30 mm 2,50 kg STANDARD EQUIPMENT 1 sanding arm, pointed, 9 mm sanding arm, with big roll, 30 mm sanding belts, grit 60, 4 mm 2 pieces of sanding belts, grit 120, 4 mm 2 pieces of sanding belts, grit 60, 9 mm 2 pieces of sanding belts, grit 120, 9 mm 2 pieces of sanding belts, grit 60, 30 mm 2 pieces of sanding belts, grit 120, 30 mm 2 pieces of sanding fleece medium, 9 mm 1 piece of sanding fleece medium, 30 mm 1 piece of side handle hexagon socket screw key, special tool plastic carrying case with padding Start up immediately The FLEX power file with two sanding arms complete in a set. The case also has space for an ST 1005 VE including accessories. 31

35 Metal surface finishing LBR 1506 VRA ST 1005 VE watt weld and pipe belt sander Finger sander Highly efficient and resilient motor for more power output VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection Sanding belt tension: spring loaded, adapts to pipe diameter from 10 to 250 mm Sanding belt replacement: quick and easy Hand grip directly over the sanding belt for fatigue-free work Sanding belts: wide assortment included sanding fleece for stainless steel applications Infinately (LBR 1506 VRA) adjustable belt speed Grinding weld seam directly on front contact roller with locked front swing arm Grinding pipes: between two rollers with unlocked front swing arm. The grinding belt wraps around the pipe and adapts to the pipe diameter VE electronic control: infinately adjustable stroke speed via speed selector wheel Free view of the tool 2 polishing shoes with Velcro polishing cushion 39 x 60 mm The linear movement of the tilted sanding pad allows the finger sander to reach into corners and edges, particularly with the pointed pad Short, compact motor Handy, lightweight design For a perfect finish on steel and stainless steel surfaces in hardto-reach areas Long stroke for efficient working SPECIFICATIONS LBR 1506 VRA SPECIFICATIONS ST 1005 VE Power input 1200 watt Power input 400 watt Power output 700 watt Power output 220 watt Belt speed m/sec Sanding medium 39 x 60 mm Belt dimensions 40 x 618 mm Orbit 8 mm 4,20 kg Orbit rate, without load rpm 2,20 kg STANDARD EQUIPMENT 1 side handle bail handle sanding belt, continuous, grit 60 1 piece of sanding belt, continuous, grit piece of sanding belt, continuous, grit piece of sanding fleece 618 x 40 medium 1 piece of hexagon socket screw key, special tool hexagon socket screw key, special tool hexagon socket screw key, special tool STANDARD EQUIPMENT 2 polishing shoes with Velcro polishing cushion 1 set 10 Velcro sand paper grit Velcro sand paper grit Velcro sand paper grit Velcro fleece 39 x 60 medium hexagon socket screw key, special tool

36 Metal surface finishing LRP 1503 VRA Boa pipe belt sander in set Highly efficient and resilient motor for more power output VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection Sanding belt replacement: quick and tool-free High-quality, spring-mounted sanding arm: light alloy with 2 deflection rollers. For optimum wrap-round on pipes, up to max. 270 Additional side handle: can be rotated 180, for narrow places Swinging the supplementary grip locks the sanding arm to allow work in confined spaces, e.g. sanding hand rails near walls. The sanding boa as complete kit The extensive accessories are included as standard with the LRP 1503 VRA. SPECIFICATIONS Power input Power output Belt speed Belt dimensions Pipe Ø max. LRP 1503 VRA 1200 watt 700 watt 4-12 m/sec 760 x 40/20 mm 125 mm 3,70 kg STANDARD EQUIPMENT 1 sanding belt, continuous, grit 80, 760 x 40 mm 1 piece of sanding belt, continuous, grit 120, 760 x 20 mm 1 piece of sanding belt, continuous, grit 220, 760 x 20 mm 1 piece of sanding fleece, continuous, fine, 760 x 40 mm 1 piece of sanding fleece, continuous, medium, 760 x 40 mm 1 piece of sanding-polishing belt, continuous, grit 600, 760 x 40 mm sanding-polishing belt, continuous, grit 1500, 760 x 40 mm plastic carrying case with padding guide pulley sanding belt pipe drive roll Polishing and sanding pipes The FLEX-sanding boa sands and polishes radii of up to

37 Metal surface finishing LLK 1503 VR Fillet welt grinder Highly efficient and resilient motor for more power output VR full-wave electronic control: with speed selection and constant speed control, soft start, overload protection. Infinately adjustable speed for optimum finishing of various materials. Slim sanding head: sand and polish with ease in corners, easy to guide Quality abrasives: compressed fleece-fibre nylon Profiling stone: for pre-profiling the grinding discs Everything included Fillet weld grinder, grinding discs, and profiling stone in the practical FLEX case. SPECIFICATIONS Power input Power output Max. disc diameter Speed without load LLK 1503 VR 1200 watt 700 watt 152 mm rpm 3,40 kg STANDARD EQUIPMENT 1 profiling stone FixTec quick-clamp nut M compact grinding disc, 3 mm, soft compact grinding disc, 3 mm, hard compact grinding disc, 6 mm, soft compact grinding disc, 6 mm, hard plastic carrying case with padding

38 Accessories metal surface finishing Accessories for the LP 1503 VR finishing machine for metal and stainless steel Poli-clean Flap wheel sanding Hard-structured fleece wheel. For cleaning welds and intensive, pore-deep removal of rust and oxidation layers. Also creates particularly decorative longitudinal finishes on stainless steel. 100 Ø x Flexible sanding wheel with individual flexible flap-type sanding lamellae and keyway. 2 wheels are required. For paint removal, sanding and strong graining applications. Removes scratches, rust, old paint, scale and burrs. The 40 grit employed enables the removal of even deep scratches on stainless steel. Grit 100 Ø x 50 grit Ø x 50 grit Ø x 50 grit Ø x 50 grit Ø x 50 grit Ø x 50 grit Ø x 50 grit Nylon brushes Impregnated with sanding grits. Flexible, interspersed plastic brushes. For deburring, cleaning, roughing and smoothing. (Also suitable for wood, brushing applications and removing fibres.) Needed is one piece plus distance ring set (order no ). Stainless steel wire brush Grit 100 Ø x 70 grit Flexible stainless steel wire brush. Rust removal, deburring, roughing and paint removal. Needed is one piece plus distance ring set ( no ). Stranded wire brushes 100 Ø x Made of strong, twisted, gold-colored steel wire. Extremely tough and rigid. For rust removal, deburring, removing dirt and old paint. Brings up the grain structure in wood. Needed is one piece plus distance ring set (order no ). 100 Ø x Sanding fleece Sanding fleece flap Flexible polishing wheel made of sanding grit-impregnated nylon web with a keyway. Two wheels are required (for 50 mm wide fleece only). Achieves effective surface finishes on stainless steel, copper, aluminum, brass, etc. Also ideal for cleaning oxidized coatings and smoothing plastic and wood. Grit 100 Ø x 50 grit 80/ Ø x 50 grit Ø x 50 grit 280/ Ø x 50 grit Ø x 100 grit 80/ Ø x 100 grit Ø x 100 grit 280/ Ø x 100 grit Flexible combination of sanding flap and sanding fleece. Two wheels are required (for 50 wide). Suitable for dulling and finishing. Removes small scratches on metal, hard plastics and wood. Grit 100 Ø x 50 grit 80/ Ø x 50 grit 150/ Ø x 100 grit 80/ Ø x 100 grit 150/ Fine sanding roller Grinding fleece, folded Soft rubber polishing wheel made of grit-impregnated rubber web. 2 rollers are required. For particularly bright longitudinal structures. Best effects are achieved on stainless steel. Flexible polishing wheel with multiple-folded grinding fleece for practically ridge-free grinding stainless steel, copper, aluminium, brass, etc. Grit 100 Ø x 50 grit Ø x 50 grit Grit 100 Ø x 100 grit Ø x 100 grit Ø x 100 grit

39 Accessories metal surface finishing 2 Polishing felt Cotton buffing wheel Distance ring set High-gloss range INOX Clean spray Soft, flexible felt polishing wheel. Two wheels are required. For high-gloss polishing when using polishing pastes and creams. 100 Ø x Polishing ring made of impregnated cotton cloth. Achieves a highgloss polished finish on aluminum, brass and stainless steel. Needed are 8 pieces plus distance ring set (order no ). 100 Ø x Required for nylon brushes, stainless steel wire brushes, stranded wire brushes, cotton buffing wheels. Also necessary for sanding flaps, sanding fleeces, sanding fleece flaps, fine sanding rollers and sanding wheels less than 100 mm wide if only one sanding wheel is to be mounted For high-gloss effects, particularly with stainless steel and for sealing surfaces. To seal the surface, 400 ml tin. 1 set Sanding-polishing sleeve For high-gloss polishing without polishing agents in two steps. Grit 90 Ø x 100 grit Grit 90 Ø x 100 grit Zirconium corundum sanding sleeves For coarse and medium sanding. Grit 90 Ø x 100 grit 60 blue Grit 90 Ø x 100 grit 100 grey Fleece sanding sleeves Grit 90 Ø x 100 grit 180 brown For decorative finishes. Grit 90 Ø x 100 grit 100/120 brown Grit 90 Ø x 100 grit 180/240 red Rubber air roller For sensitive contour sanding. Grit 90 Ø x 100 grit 400 blue Ø x Drive roller For sanding belt drive. Air pump With air pump and ring fastener. For sensitive contour sanding 90 Ø x For pumping up rubber air rollers Ø x With stainless steel guide discs. Needed is the distance ring set ( no ). 62 Ø x

40 Accessories metal surface finishing Belts without Velcro seal for LP 1503 VR / LBR 1506 VRA Sanding belt, continuous For polishing pipes and pipe fittings. Velcro fleece For polishing pipes and pipe fittings. Grit 600 x 40 A Sanding fleece, continuous Grit 618 x 40 grit x 40 grit x 40 grit x 40 grit For polishing pipes and pipe fittings. Grit 600 x 40 A Grit 600 x 40 S Felt belt Grit 618 x 40 grit x 40 grit x 40 grit For polishing stainless steel surfaces. 618 x Velcro polishing belt For high-gloss polishing of stainless steel. Velcro drive belt, blue Grit 600 x 40 S For closing and releasing the different belts. Simple application - tensile resistance up to 100 kg. Adhesive tape for sanding belt For sealing open sanding belts for the LP 1503 VR. 700 x x Belts with hook and loop attachment for burnishing machine LP 1503 VR Velcro sanding belt For polishing pipes and pipe fittings. Grit 600 x 40 grit Velcro sanding belt For polishing pipes and pipe fittings. Grit 600 x 40 grit

41 Accessories metal surface finishing Accessories for the LBS 1105 VE finger belt sander Sanding belt, 30 mm 2 Sanding arm, 9 mm, pointed For extremely tight spaces. Application cases: Sanding wedge seams (small radius), sanding down corrosion spots, smoothen tight contours, deburring edges, sanding banisters, sanding groove gaps for tongue-and-groove boards. Sanding arm, 9 mm, cambered For angles and tight spaces. Application cases: Sanding wedge seams (large radius), deburring edges, sanding banisters, sanding groove gaps for tongue-and-groove boards. Sanding fleece, 9 mm Continuous, for 30 mm sanding arm. Grit 533 x 30 grit x 30 grit x 30 grit x 30 grit Continuous, for 9 mm sanding arm. Grit 533 x 9 grit 240 medium x 9 grit 400 fine Sanding arm, 30 mm, small roller For edges and surfaces. Application cases: Sanding butt seam welds, deburring edges, sanding surfaces, removing rust. Sanding arm, 30 mm, large roller For pipes and curves. Application cases: Sanding weld seams on pipes, sanding down radii and transitions, deburring Sanding fleece, 30 mm Continuous, for 30 mm sanding arm. Grit 533 x 30 grit 240 medium x 30 grit 400 fine Sanding-polishing belt, continuous For high-gloss polishing without polishing agents in two steps. Grit 533 x 30 grit Grit 533 x 30 grit Sanding belt, 4 mm Continuous, for 9 mm sanding arm. Felt belt, 9 mm For polishing stainless steel surfaces. Sanding belt, 9 mm Continuous, for 9 mm sanding arm. Grit 533 x 4 grit x 4 grit x 4 grit x 4 grit Grit 533 x 9 grit x 9 grit x 9 grit x 9 grit Felt belt, 30 mm 533 x For polishing stainless steel surfaces. 533 x

42 Accessories metal surface finishing Accessories for the ST 1005 VE finger belt sander Sanding fleece, continuous Velcro sand paper Grit 39 x 60 grit Grit 39 x 60 grit For polishing pipes and pipe fittings. Grit 760 x 40 fine x 40 medium x 40 coarse Sanding-polishing belt, continuous For high-gloss polishing without polishing agents in two steps. Grit 760 x 40 grit x 40 grit Velcro sanding fleece Grit 39 x 60 grit Polishing shoe, slanted Grit 39 x 60 grit INOX Clean spray To seal the surface, 400 ml tin. Accessories for filled weld grinder LLK 1503 VR Compact grinding disc Professional sanding discs: hot-compressed compact sanding discs for stainless steel, metal, and other materials in 2 different thicknesses and hardnesses: the hard sanding disc is used for sanding, the soft one for polishing. Polishing shoe, pointed With Velcro polishing cushion. With Velcro backing Profiling stone Grit 152 x 3 x 25 soft x 3 x 25 hard x 6 x 25 soft x 6 x 25 hard For pre-profiling the compact sanding discs Accessories for Boa sander LRP 1503 VRA Sanding belt, continuous For polishing pipes and pipe fittings. Grit 760 x 40 grit x 40 grit x 40 grit x 20 grit x 20 grit FixTec quick clamp nut M 14 For tool-free tool changes, approved for discs up to 150 mm Ø

43 Universal surface finishing XS MS watt random-orbit sander 220 watt palm sander Quiet-running motor Ergonomically designed, non-slip, soft grip handle for safe, comfortable working Dust-proof on/off switch Connection to external dust extractor using the supplied adapter Integrated dust extraction with dust filter bag Compact, handy, lightweight design Easy hook and loop abrasive attachment Quiet-running motor Ergonomically designed, non-slip, soft grip handle for safe, comfortable working Aluminium sanding support plate Dust-proof on/off switch Connection to external dust extractor using the supplied adapter Integrated dust extraction with dust filter bag Compact, handy, lightweight design Easy hook and loop abrasive attachment SPECIFICATIONS XS 713 Power input 230 watt Power output 75 watt Orbit rate, without load rpm Orbit 1,6 mm Sand paper Ø 125 mm Sanding media fixing hook and loop 1,30 kg SPECIFICATIONS MS 713 Power input 220 watt Power output 120 watt Orbit rate, without load rpm Orbit 1,6 mm Sand paper 115 x 105 mm Sanding media fixing hook and loop / clamp 1,20 kg STANDARD EQUIPMENT 1 Velcro sand paper, with 8 perforations 1 piece 1 dust bag adapter for dust extractor STANDARD EQUIPMENT 1 paper punch 1 piece 1 dust bag adapter for dust extractor

44 Universal surface finishing X 1107 VE F watt random-orbit sander with dust extraction 710 watt gutter support groove cutter VE electronic control: with infinately adjustable speed control Rugged, highly efficient motor Vacuum fitting: for connecting to vacuum cleaner, diameter 28 mm Suitable for coarse and fine sanding of wood and grinding painted metal surfaces and car body work Counterweight ensures low-vibration operation Plastic grip guard allows extremely sensitive guiding 150mm, 6-hole hook and loop grinding pad for low-dust extraction Rugged motor 4 HSS reversible cutters: the cutters can be reversed, allowing them to be used four times Cutting head: 80 mm diameter, M 14 tool fixture Controlled chip and swarf channelling Adjustable to 6 mm and 8 mm thick gutter supports SPECIFICATIONS Power input Power output Orbit Orbit rate, without load Max. disc diameter Sanding media fixing X 1107 VE 710 watt 420 watt 8,8 mm rpm 150 mm hook and loop 2,70 kg SPECIFICATIONS F 1109 Power input 710 watt Power output 420 watt Speed without load rpm Planer width 40 mm Planer depth 6 / 8 mm No. of cutters 4 pieces 3,90 kg STANDARD EQUIPMENT 1 side handle Velcro sand paper, with 6 perforations, grit 40, 150 Ø 1 piece of Velcro sand paper, with 6 perforations, grit 80, 150 Ø 1 piece of Velcro sand paper, with 6 perforations, grit 120, 150 Ø 1 piece of Velcro sand paper, with 6 perforations, grit 180, 150 Ø 1 piece of Velcro sand paper, with 6 perforations, grit 320, 150 Ø 1 piece of open-ended wrench SW hexagon socket screw key, special tool grip cover Velcro pad (hard) 150 Ø STANDARD EQUIPMENT 1 set HHS reversible cutters (4 pieces) metal carrying case torx wrench open-ended wrench SW 30/

45 Universal surface finishing LL 1107 VEA Flounder 710 watt flat-head sander VE electronic control: with infinately adjustable speed control Ideally suited to confined spaces from 15 mm gap width, e.g. window shutters, that are inaccessible with conventional grinders Handy, lightweight design Special accessory: metal carrying case (order no ) SPECIFICATIONS Power input Power output Speed without load Max. disc diameter Sanding head level LL 1107 VEA 710 watt 420 watt rpm 115 mm 13 mm 2,70 kg STANDARD EQUIPMENT 1 side handle Sandpaper grit 50, 115 Ø 1 piece of Sand paper grit 80, 115 Ø 1 piece of Sand paper grit 120, 115 Ø 1 piece of Velcro velours with foam coating 80 mm Ø

46 Accessories universal surface finishing Accessories for the XS 713 orbital sander Accessories for gutter support groove cutter F 1109 Velcro sanding pad With 8 perforations. 125 Ø Reversing blade HM reversing blade 21 x Velcro sand paper With 8 perforations. Grit 125 Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Accessories for the MS 713 finishing sander Velcro sand paper, square With 8 perforations. Grit 115 x 105 grit x 105 grit x 105 grit x 105 grit x 105 grit x 105 grit x 105 grit Accessories for the X 1107 VE orbital sander Velcro sanding pad With 6 perforations. 21 x Accessories for the LL 1107 VEA Flounder Velcro sand paper Velcro velours HSS reversing blade Grit 115 Ø grit Ø grit Ø grit With foam coating. Small metal carrying case 80 Ø For all angle grinders with disc Ø up to 125 mm Grit 150 Ø hard Ø soft Velcro sand paper With 6 perforations. Main application: wood. Other applications: steel, stainless steel, plastic, paint/varnish/fillers. Grit 150 Ø grit Ø grit Ø grit Ø grit Ø grit

47

48 Polishers 3 Bright prospects. The motors and gears of our polishers have been designed especially for low speeds and high torque levels. Generous power reserves and electronics with overload protection equip them for heavy-duty use. Speed selection and a continuous speed control trigger ensure seamless progression through the low-speed range. With an ergonomic grip system they are perfect for delicate work. And we have the polishing accessories to match: high-quality FLEX sponges - tearproof and with a heat-proof hook and loop attachment. Together with lambswool, fleece and polishing sets, we also supply matching polish and paint sealant. 45

49 Polishers 3 Gentle on temperature-sensitive finishes. The random-orbital movement of the XC 3401 VRG minimizes heat generation on the surface and prevents the creation of hologram effects. Reflecting automotive lacquers? Perfect furniture surfaces? FLEX puts customised solutions in your hand for that optimal finish. The FLEX polishing system: recommended applications Orange peel effect Dust inclusions Deep scratches Scratches L 602 VR L 3403 VRG L 1503 VR L 602 VR L 3403 VRG L 1503 VR XC 3401 VRG Rotary Lambswool pad Sponge, blue Sponge, Abrasive compound 46

50 Polishers 3 Hologram effects Paint sealing XC 3401 VRG For toughest non-stop operation during brushing, polishing, and buffing wood and stainless steel. Polisher L 1202 Thanks to the handles that are spaced wide apart the light-weight polisher can be guided with special care and precision even over large surfaces. Polisher L 3403 VRG Random orbit black Sponge, white Profi high gloss polish With extremely low speed and high torque it is ideal for acrylic paints, Corian, GFRP, glass, stone, and water-soluble paints. Polisher L 1501 VR Well handled in any position. For everyone who needs to polish over sensitive surfaces with special precision and care. Polisher L 602 VR with bail handle 47

51 Polishers L 602 VR L 602 VR-Set Variable-speed polisher with two grip variations Variable-speed polisher with two grip variations in a set Highly efficient and resilient motor for more power output VR electronic control: tachogenerator constant speed control, soft start with continuous speed control trigger, overload protection, temperature monitoring and speed selection with optimized low-speed range Integrated air deflection: protects against direct air flow Optimum handling by balanced weight distribution and 2 grip variants, depending on use Perfect cooling for heavy-duty use. Rubber rest bar protects machine and surface of workpiece when changing pads Powerful machine in compact, lightweight design Spindle lock Highly efficient and resilient motor for more power output VR electronic control: tachogenerator constant speed control, soft start with continuous speed control trigger, overload protection, temperature monitoring and speed selection with optimized low-speed range Integrated air deflection: protects against direct air flow Optimum handling by balanced weight distribution and 2 grip variants, depending on use Perfect cooling for heavy-duty use. Rubber rest bar protects machine and surface of workpiece when changing pads Powerful machine in compact, lightweight design Spindle lock SPECIFICATIONS L 602 VR Max. polishing pad diameter 220 mm Max. back-up pad diameter 160 mm Speed without load /2400 rpm Power input 1500 watt Power output 1000 watt Tool fixture M 14 3,30 kg SPECIFICATIONS L 602 VR-Set Max. polishing pad diameter 220 mm Max. back-up pad diameter 160 mm Speed without load /2400 rpm Power input 1500 watt Power output 1000 watt Tool fixture M 14 3,30 kg STANDARD EQUIPMENT 1 grip cover side handle bail handle STANDARD EQUIPMENT 1 grip cover side handle bail handle Velcro pad 150 Ø Velcro sponge 200 Ø x microfibre polishing cloth Rubbing compound 250 ml Profi high gloss polish 250 ml

52 Polishers L 3403 VRG L 3403 VRG-Set Polisher with continuous speed control trigger Polisher with continuous speed control trigger in set VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection High-powered motor: can handle extreme loads Ergonomic design Slim shaft grip with ergonomic bail handle for optimum handling and fatigue-free polishing Spindle lock VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection High-powered motor: can handle extreme loads Ergonomic design Slim shaft grip with ergonomic bail handle for optimum handling and fatigue-free polishing For a perfect deep shine: clean polished surface with the microfibre cloth Spindle lock SPECIFICATIONS L 3403 VRG Max. polishing pad diameter 160 mm Max. back-up pad diameter 125 mm Speed without load rpm Power input 1400 watt Power output 880 watt Tool fixture M 14 2,20 kg SPECIFICATIONS L 3403 VRG-Set Max. polishing pad diameter 160 mm Max. back-up pad diameter 125 mm Speed without load rpm Power input 1400 watt Power output 880 watt Tool fixture M 14 2,20 kg STANDARD EQUIPMENT 1 bail handle side handle STANDARD EQUIPMENT 1 bail handle side handle Velcro pad 125 Ø Velcro sponge blue, 160 Ø x Velcro sponge white, 160 Ø x microfibre polishing cloth Rubbing compound 250 ml Profi high gloss polish 250 ml

53 Polishers XC 3401 VRG XC 3401 VRG-Set Positive-drive orbital polisher Positive-drive orbital polisher in set VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection 8 mm orbit for high efficiency Permanent direct drive for an even polished surface Cushioned special hook and loop pad for polishing. Removable, ergonomic handle and guard for optimum handling in all applications Low heat generation on the surface makes it ideal for temperature-sensitive paints Counterweight for quiet operation Low height and low weight Spindle lock VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection 8 mm orbit for high efficiency Permanent direct drive for an even polished surface Removable, ergonomic handle and guard for optimum handling in all applications Cushioned special hook and loop pad for polishing. Low heat generation on the surface makes it ideal for temperature-sensitive paints Counterweight for quiet operation Low height and low weight Spindle lock SPECIFICATIONS XC 3401 VRG SPECIFICATIONS XC 3401 VRG-Set Max. polishing pad diameter 160 mm Max. polishing pad diameter 160 mm Velcro pad Ø 140 mm Velcro pad Ø 140 mm Speed without load rpm Speed without load rpm Orbit 8 mm Orbit 8 mm Orbit rate, without load rpm Orbit rate, without load rpm Power input 900 watt Power input 900 watt Power output 590 watt Power output 590 watt 2,60 kg 2,60 kg STANDARD EQUIPMENT 1 grip cover SoftVib-Handle bail handle Special Velcro backing pad, 140 Ø STANDARD EQUIPMENT 1 grip cover SoftVib-Handle bail handle Special Velcro backing pad, 140 Ø Velcro sponge white, 160 Ø x microfibre polishing cloth set-bag Rubbing compound 250 ml Profi high gloss polish 250 ml

54 Polishers L 1501 VR L 1503 VR Handy low-speed, high-torque polisher, 1200 watt Polisher with a wide speed range VR full-wave electronic control: tachogenerator constant speed control, soft start, overload protection and speed selection Two-stage gear reduction: for low speed and high torque Its low speed range is adjustable for sensitive surfaces. Ideal for acrylic paints, Corian, GRP, glass, stone and water-based paints Hand grip directly over the polishing tool for optimum handling and fatigue-free work Spindle lock Highly efficient and resilient motor for more power output VR electronic control: tachogenerator-controlled constant speed, soft-start, overload protection and speed selection Powerful, lightweight polisher with variable speed Spindle lock SPECIFICATIONS L 1501 VR Max. polishing pad diameter 220 mm Max. back-up pad diameter 175 mm Speed without load rpm Power input 1200 watt Power output 700 watt Tool fixture M 14 2,60 kg SPECIFICATIONS Max. polishing pad diameter Speed without load Power input Power output L 1503 VR 160 mm rpm 1200 watt 700 watt 1,90 kg STANDARD EQUIPMENT 1 bail handle flexible pad 175 Ø lambswool pad 180 Ø STANDARD EQUIPMENT 1 side handle grip cover

55 Polishers L Powerful low-speed polisher, 1600 watt High-powered motor: can handle extreme loads Low speed, high torque Rugged metal composite housing for optimum heat dissipation For continuaus use with large polishing heads for brushing, polishing and buffing wood and stainless steel Spindle lock SPECIFICATIONS L 1202 Max. polishing pad diameter 250 mm Max. back-up pad diameter 175 mm Speed without load 1750 rpm Power input 1600 watt Power output 1100 watt Tool fixture M 14 5,10 kg STANDARD EQUIPMENT 1 side handle hand guard handle

56 Accessories polishers L 602 VR L 3403 VRG XC 3401 VRG L 1501 VR L 1503 VR L 1202 L 3406 VRG Accessories for polishing systems Abrasive compound Innovative single-step cutting polish for the latest generation of scratch-proof paint. This polish can be used on new and old paint finishes without leaving hologram effects and polish haze, while achieving a deep shine with low dust production. Even on dark finishes, hologram effects and polish haze are easily removed. The right combination of polisher and lambswool/sponge is important for obtaining a perfect result. 250 ml ml Profi high gloss polish High-quality paint sealant formulation, based on organic and synthetic waxes, free of volatile silicones. Extremely high degree of sheen and paint protection. In one pass the nano-grinding particles permanently seal the paint finish, removing light hologram effects. The white sponges are best suited for use with this sealant. 250 ml ml Microfibre polishing cloth Seamless, washable. For gentle removal of polishing and sealing residues. For a perfect surface finish and brilliant deep sheen. 400 x Velcro-backed pad with gearwheel Damped special hook and loop backing pad for sponges up to max. Ø 160 mm. The special sockets allow use of this pad only with the XC 3401 VRG. 140 Ø

57 Accessories polishers L 602 VR L 3403 VRG XC 3401 VRG L 1501 VR L 1503 VR L 1202 L 3406 VRG Accessories for polishing systems 3 Hook and loop pad, cushioned 12 mm cellular rubber backing pads ensure uniform pressure distribution when polishing and sealing. 125 Ø Ø Velcro sanding pad M Ø Ø With rubber cushioning for uniform pressure distribution. 115 Ø Hook and loop sponge, blue (hard) Sponge with high tensile strength and coarse foam structure for polishing surfaces. Particularly suitable for extremely weathered or dull painted surfaces in combination with Flex special sanding polish ( ). With centring hole, inner diameter 22 mm. 160 Ø x Ø x Hook and loop sponge, white (soft) Fine, soft and extremely highly tear-proof polishing sponge for treatment of paint or varnish in combination with FLEX Pro paint sealant ( ). With centring hole, inside diameter 22 mm. 160 Ø x Ø x Velcro sponge, black (supersoft) Extremely fine and soft for removing hologram effects and polish haze on dark paintwork in combination with FLEX special cutting polish ( ). With centring hole, inside diameter 22 mm. 160 Ø x Ø x

58 Accessories polishers Grit L 602 VR L 3403 VRG XC 3401 VRG L 1501 VR L 1503 VR L 1202 L 3406 VRG Accessories for polishing systems Velcro wafer sponge, black (super soft) Extremely fine and soft for removing hologram effects and polish haze on dark paintwork in combination with special cutting polish ( ). The surface structure minimizes heat generation during polishing. 150 Ø x Ø x Velcro TopWool The pad consists of 90 % lambswool and 10 % polyester. This composition provides for more stability and volume. For great polishing effect in combination with the special sanding polish ( ) on new and older lacquers. 150 Ø Ø Accessories for universal polishing Velcro lambswool pad For coarse, aggressive polishing and fast results. 120 Ø Sanding-polishing pad For high-gloss polishing of stainless steel without polishing medium in three stages. 125 Ø grit Ø grit Ø grit Velcro polishing sponge For repolishing. 120 Ø x

59 Accessories polishers L 602 VR L 3403 VRG XC 3401 VRG L 1501 VR L 1503 VR L 1202 Accessories for universal polishing 3 Flexible backing pad For M 14 backed lambswool. 175 Ø Backed lambswool Only for elastic pad, order no Ø Backed fleece Fiber backing with M 14 threaded flange, for removing scratches in glass and acrylics. 125 Ø Ø Spare fleece With fiber backing. 125 Ø Ø Molleton buffing wheel 125 Ø Muslin buffing wheel, coarse For general polishing. Vertical running, for preliminary polishing, polishing, and repolishing using appropriate buffer wax. no : 2 pieces needed. 150 Ø x Ø x

60 Accessories polishers L 602 VR L 3403 VRG XC 3401 VRG L 1501 VR L 1503 VR L 1202 Accessories for universal polishing Flannel buffing wheel, medium For high-gloss polishing. Vertical running, for preliminary polishing, polishing, and repolishing using appropriate buffer wax. no : 2 pieces needed. 150 Ø x Ø x Buffing wheel mount, M Buffing wax light/fine dark/medium red/coarse Carry bag for polisher Practical mobile carry bag offer lots of room for machine and accessories, with variable pockets SoftVib side handle with pin wrench SoftVib handle with integral, patented facepin wrench (DE A1) and vibration cushioning, significantly reducing the vibration transmitted to hands and arms. With built-in face-pin wrench for quick disc changing without additional tools

61 58

62 Floor and wall finishing 4 The new WST 700 VV Vario- Giraffe has a really high reach. Where you used to need a ladder, the FLEX WST 700 VV Giraffe long-neck sander now makes the job child's play. It is so much faster, cleaner with dust extraction and above all: better. 59

63 Floor and wall finishing 4 The new WST 700 VV Vario-Giraffe leaves virtually nothing to be desired. Handy and easy telescoping, interchangeable round and triangular heads, several grip possibilities for optimum balance of the tool and the familiar performance and quality of FLEX. Need to sand off three-metrehigh ceilings and wall surfaces? Word has spread around the world about the outstanding qualities of the FLEX Giraffe long-necked sander. For smoothing plasterboard panels or Styrofoam solid insulation panels, painting preparation, or polishing the Giraffe has become the indispensable problem solver for every painter, plasterer and other professional user. We have taken an excellent product and made it even better, combining two power tools into one in the WST 700 VV Vario-Giraffe. Whether you are working on walls or ceilings, you now need only one tool. The unique telescopic action enables the Giraffe to easily adapt to your needs. And the newly developed triangular orbital sanding head allows seamless sanding of corners and edges. In order to do its job especially neatly and effectively the Giraffe needs strong partners: An effective, robust industrial vacuum cleaner such as the FLEX S 47 or S 47 M and the right sanding discs. Only by applying the optimal triple combination of sander, vacuum, and sanding disc accessories can the user get the most out of the Giraffe. 60 The novel rear grip can be used to provide secure standing for the Vario-Giraffe on the floor or leaning against a wall. It also prevents the hose from kinking.

64 Floor and wall finishing 4 The articulating sanding head can be adjusted to every tilt and angle. The telescopic grip makes sanding high walls and ceilings easier. The ergonomic design allows every user to find the best and most comfortable grip position for fatigue-free working. Whether working overhead or down to floor level, it is always easy to find the optimum grip position. The motor is always kept between the gripping positions, ensuring a perfect balance. Quick and easy adjustment of the telescopic handle allows a range of heights to be sanded in a single operation. 61

65 Floor and wall finishing Even in the tightest corners and angles, the WST 700 VV is always at home, impressing with its perfect results. 4 The novel interchangeable triangular head allows seamless sanding of edges and corners, eliminating the need for manual finishing. The eccentric movement of the sanding head takes the abrasive right up to the edges. Sanding head mounted on a universal-joint Extraction and flexible shaft Easy, tool-free interchange of the round and triangular heads Easy-to-operate telescope lock. Open lever pull out handle close lever 62

66 Floor and wall finishing The ergonomically shaped T-handle gives additional hold when sanding ceilings. The telescopic handle is released with a quick hand movement. The handle can now be set to the required length. The novel interchangeable heads are attached and removed with a click. 4 The unique storage system has been specially developed for the WST 700 VV Vario-Giraffe and the MS 1706 FR wall chaser. The new storage system clips to the vacuum cleaner with a with a quick hand movement. Simply place the Giraffe on the rest and then you can conveniently change the abrasive or sanding head. Ergonomic handle Continuous speed control Powerful 700 Watt motor Telescopic handle. Extendable from 1330 mm-1730 mm 63

67 Wall and ceiling sanders WST 700 VV Vario NEW Giraffe wall and ceiling sander 4 VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel Using a unique telescopic system, the Giraffe adapts to your needs. Length adjustable from 1330 mm mm. Open telescope lock lever, pull out handle and close lever Ergonomic design with many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance With round sanding head that can be exchanged with just a click Backing pad with hook and loop face The articulating sanding head can be adjusted to every tilt and angle Vacuum cleaning system: guard with a brush ring, flexible suction hose from the sanding head to the guide tube. Connection facility at the rear of the telescopic tube for FLEX industrial vacuum cleaner, models S 36, S 47 and S 47 M Ideally suited for sanding plaster boards, solid Styropor insulation slabs, preparation for painting, polishing SPECIFICATIONS WST 700 VV Vario Power input 710 watt Power output 420 watt Speed without load rpm ,80 kg STANDARD EQUIPMENT Round sanding head Velcro sand paper, grit 60 1 item from Velcro sand paper, grit 80 1 item from Velcro sand paper, grit item from Velcro sand paper, grit item from m vacuum hose, 32 mm Ø with positive-lock connector and vac connection 1 piece Plastic carry case 1 piece 64

68 Wall and ceiling sanders WST 700 VV Vario-Plus NEW Giraffe wall and ceiling sander 4 VV electronic control: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel Using a unique telescopic system, the Giraffe adapts to your needs. Length adjustable from 1330 mm mm. Open telescope lock lever, pull out handle and close lever Ergonomic design with many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance Fitted with interchangeable heads that are attached and removed with a click Including triangular sander head. This is optimally suited for sanding corners and edges. The orbital movement of the sanding head takes the abrasive right up to the edges Backing pad with hook and loop face The articulating sanding head can be adjusted to every tilt and angle Vacuum cleaning system: guard with a brush ring, flexible suction hose from the sanding head to the guide tube. Connection facility at the rear of the telescopic tube for FLEX industrial vacuum cleaner, models S 36, S 47 and S 47 M Ideally suited for sanding plaster boards, solid Styropor insulation slabs, preparation for painting, polishing SPECIFICATIONS WST 700 VV Vario-Plus Power input 710 watt Power output 420 watt Speed without load rpm Corner sander no-load speed rpm ,80 kg STANDARD EQUIPMENT Round sanding head Triangular sanding head Velcro sand paper, grit 60 1 item from Velcro sand paper, grit 80 1 item from Velcro sand paper, grit item from Velcro sand paper, grit item from Hook and loop abrasive paper, angular, K 60 1 item from Hook and loop abrasive paper, angular, K 80 1 item from Hook and loop abrasive paper, angular, K item from Hook and loop abrasive paper, angular, K item from m vacuum hose, 32 mm Ø with positive-lock connector and vac connection 1 piece Plastic carry case 1 piece 65

69 Wall and ceiling sanders WS 702 VEA Giraffe long-neck sander 4 VE electronic control: with continuously adjustable speed control Dust extractor system: with ring brush on the protective cover, flexible vacuum hose from the sanding head to guiding pipe. Connection available for FLEX S 36, S 47 and S 47 M industrial vacuum cleaners at rear end of guiding pipe With automatic filter cleaning, the S 47 and S 47 M is the ideal complement to the Giraffe. It ensures consistent cleaning during the working process Velcro adapter: large surface, cushioned Easy guiding: by optimal balance between motor and grinding head Allows you to reach 3-metre high ceilings and surfaces without a ladder or scaffolding The universal-joint-mounted sanding head and soft backing pad prevent grooving and scratching and ensures a perfect finish With the wide range of FLEX abrasives, the variety of uses for painting and varnishing preparation, cleaning and polishing is virtually limitless From the ceiling to the walls The Giraffe makes interior work simply faster, cleaner, perfect. Long-neck sander WS 702 VEA Giraffe SPECIFICATIONS Power input Power output Speed without load Grinding disc Ø Length WS 702 VEA 400 watt 200 watt rpm 225 mm 1580 mm 4,20 kg STANDARD EQUIPMENT 4-m vacuum hose (32 mm Ø) with two adapters 1 piece 1 adapter for Velcro sand paper Velcro sand paper, grit 40 1 piece of Velcro sand paper, grit 60 1 piece of Velcro sand paper, grit 80 1 piece of Velcro sand paper, grit piece of Velcro sand paper, grit piece of Velcro sanding, grit 80 1 piece of Velcro cable clips

70 Accessories wall and ceiling sanders Hook and loop abrasive for painting and varnishing preparation and accessories for WST 700 VV Hook and loop abrasive paper, Select, round For grinding joint filler in drywall construction, punched for dust extraction. Grit 225 Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Hook and loop abrasive paper Select, triangular For grinding joint filler in drywall construction, punched for dust extraction. Grit 300 x 250 grit x 250 grit x 250 grit x 250 grit x 250 grit x 250 grit x 250 grit x 250 grit x 250 grit Round sanding head Triangular sanding head Backing pad Ø 225, round Storage system for S 47, S 47 M Optimally suitable for finishing large surfaces on walls and ceilings. Effective dust extraction, high surface removal rate Ideal for sanding corners and edges. The orbital movement of the sanding head takes the abrasive right up to the edges Hard backing pad with high removal rate, with use with hook and loop backed abrasives Soft backing pad with high removal rate, with use with hook and loop backed abrasives Fit on to the industrial vacuum cleaner for the WST 700 Giraffe or MS 1706 wall chaser and vacuum hose

71 Accessories wall and ceiling sanders Patented Velcro sanding media for the WS 702 VEA and WSK 702 VEA, for the preperation of drywall constructions for painting or varnishing Velcro sanding media for universal applications. For cleaning, sanding and polishing with the WS 702 VEA and the WSK 702 VEA Velcro sand paper For sanding polystyrene slabs (thermal protection). Grit 225 Ø grit Velcro SiC (silicon carbide) sand paper sheet Grit 225 Ø S Ø S Velcro sanding grid For rapid removal of surface irregularities. Grit 225 Ø grit Velcro sanding fleece Grit 225 Ø grit Ø grit For rapid removal of fine surface irregularities. Grit 225 Ø grit Velcro polishing sponge Grit 225 Ø soft Velcro sand paper (perforated) For leveling coarse surface irregularities. Grit 225 Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit Ø grit

72 Accessories wall and ceiling sanders Accessories long-neck sander WS 702 VEA and the short-neck sander WSK 702 VEA Connection Industrial vacuum cleaner S 36, S 47 and S 47 M to WS 702 VEA and WSK 702 VEA Padded adapter for Velcro paper Velcro system for attaching the sanding discs, soft Vacuum hose Vacuum hose, 32 mm internal Ø, 4.0 m long, incl. coupling bush for vacuum cleaner ( no ) and special adapter with metal ring ( no ) Velcro system for attaching the abrasive discs, hard. Rotating suction adapter The adapter can be rotated and connects the vacuum cleaner to the 32-mm vacuum hose. Bail handle For effortless working in difficult positions (e.g. overhead work) Special adapter With metal ring, for connecting the 32 mm vacuum hose to the original Giraffe and Okapi vacuum attachment Padded carrying bag The clean conveyor for the sander and accessories. Also protects against damage

73 70

74 Floor and wall finishing 4 FLEX special-purpose power tools. They take on the toughest tasks. If the task is to chase slots in walls for cable or duct installation, to scour plaster, cement and screed or to remove various coatings - FLEX has the right solution for every problem. The perfectly adapted extraction and filter system of the new special vacuum S 47 M prevents dust that is harmful to your health from getting in the surrounding air. 71

75 Floor and wall finishing 4 Precision along all edges. A variably-adjustable stop makes it possible to roughen slabs or steps exactly parallel to the outer edge. The working width can be adjusted over several stages. Bushhammer LST 1503 VR Crucial for effective floor and wall working are the proper tools. The adjusting screw on the extraction hood can be used to set the grinding depth to a maximum of 5 mm. 72

76 Floor and wall finishing 4 The new telescopic WST 1000 FV from our Giraffe family allows you to work without a ladder or scaffolding. The WST 1000 FV easily removes concrete seams and joint ridges. The efficient dust extraction system together with the S 36, S 47 and S 47 M ensures a clean and healthy working environment. For smaller renovation jobs on your building, the FS 3403 VRG is an irreplaceable assistant. Armed to the teeth. 35 toothed milling discs made of solid carbide alloy make short work of old plaster and carpet adhesive residues. Scouring machine HPI 603 Special storage accessories for the S 47 and S 47 M for convenient holding of the MS 1706 FR for tool changing. Operate plaster mill, renovation sanders, and wall chasers only with the S 47 M industrial dust extractor. The highly effective fine filter system protects the operator from harmful dusts, the machine from abrasive particles, and the tools from excessive wear. S 47 M industrial dust extractor. 73

77 Renovation sanders WST 1000 FV NEW Giraffe scourer for walls and ceilings 4 FV electronic control: constant speed, soft-start and overload protection Using a unique telescopic system, the Giraffe adapts to your needs. Length adjustable from 1330 mm mm. Open telescope lock lever, pull out handle and close lever Ergonomic design with many different handling possibilities for fatigue-free working. The motor is always kept between the gripping positions, ensuring a perfect balance Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open Flexible rubber vacuum ring with low-wear metal ring: moves smoothly over the surface and protects against dust and stones flying out Dust extraction system: with metal ring on the guard, flexible suction hose from the scouring head to the guide tube. Connection facility at the rear of the telescopic tube for FLEX industrial vacuum cleaner, models S 36, S 47 and S 47 M The scourer with universal joint shaft and the new scouring head have been purpose-coordinated. This tool quickly and easily removes burrs and other unevenness from walls and ceilings SPECIFICATIONS WST 1000 FV Disc Ø 125 mm Speed without load 8000 rpm Power input 1010 watt Power output 600 watt Tool fixture 28 mm Ø ,50 kg STANDARD EQUIPMENT 1 Turbo grinding pad FixTec quick-clamp nut M m vacuum hose, 32 mm Ø with positive-lock connector and vac connection 1 piece Padded carry case 1 piece 74

78 Renovation sanders LD 1709 FR LD 3206 C Scouring machine for surfaces, 125 mm Scouring machine for large areas, 180 mm 4 FR electronic control: with tachogenerator constant speed control, soft start, overload protection and temperature monitoring Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open Flexible rubber vacuum ring with low-wear metal ring: moves smoothly over the surface and protects against dust and stones flying out Vacuum attachment: 32 mm exterior Ø Spindle lock FLEX Thermojet Super diamond grinding cups rapidly remove all coatings and limewashes Ideal for point work and large-area stripping Suction hose/adapter not included in delivery package Flexible rubber vacuum ring with low-wear metal ring: moves smoothly over the surface and protects against dust and stones flying out Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open Vacuum attachment: 32 mm exterior Ø Spindle lock FLEX Thermojet Super diamond grinding cups rapidly remove all coatings and limewashes Ideal for large areas Cushioning element between the motor and rear handgrip: significantly reduces vibrations, reducing operator fatigue Optimum guidance by rear shaft handle with integrated switch and bail handle Suction hose/adapter not included in delivery package SPECIFICATIONS LD 1709 FR Disc Ø 125 mm Speed without load rpm Power input 1400 watt Power output 950 watt Tool fixture M 14 2,90 kg SPECIFICATIONS LD 3206 C Disc Ø 180 mm Speed without load 6500 rpm Power input 2500 watt Power output 1700 watt Tool fixture M 14 7,60 kg STANDARD EQUIPMENT Thermojet Super 125 Ø Clamping nut Clamping flange SW Guard Bail handle Cable clip (3x) Hose clip Vacuum ring hexagon socket screw key, special tool Wrench holder metal carrying case STANDARD EQUIPMENT Thermojet Super 180 Ø Clamping nut Clamping flange SW Guard Bail handle Cable clip (3x) Vacuum ring hexagon socket screw key, special tool pin wrench pin spanner plastic carry case

79 Renovation sanders LDC 1709 FR NEW 125 mm scouring machine for dust-free scouring close to edges 4 FR electronic control: with tachogenerator constant speed control, soft start, overload protection and temperature monitoring Vacuum dust collection: protects against abrasive dust, reduces disc wear, keeps concrete pores for the new coat open Spindle lock Guard with pivoting segment to allow grinding right up to the wall. Height-adjustable to the disc height and for optimum dust extraction SPECIFICATIONS LDC 1709 FR Disc Ø 125 mm Speed without load rpm Power input 1400 watt Power output 950 watt Tool fixture M 14 2,90 kg STANDARD EQUIPMENT Thermojet Super 125 Ø Clamping nut Guard with pivoting edge segment Bail handle Cable clip (3x) Hose clip Wrench holder hexagon socket screw key, special tool adapter 32/36 mm Ø pin wrench metal carrying case

80 Accessories renovation sanders Accessories for WST 1000 FV scourer Diamond cup wheel Turbo grinding pad, maximum material removal with optimum quiet running. Dry grinding diamond cups 125 Ø x Thermo-Whirljet for thin coatings and lightly abrasive materials: Thermoplastic coatings, Paint, Graffiti, thin glue residues on concrete or screed, Rubber based coatings. Reduced weight with the FLEX flange. Only to be used on the FLEX long-neck renovation grinder. The grinding disc with the angular arranged diamond segments allows for a quicker work rate than with normal disc. The large dimensioned delta shaped holes in the discs causes an air vortex that removes all dust from the working surface and prevents the segments from clogging or overheating and so reducing wear. The leight weight disc reduces wear on the motor. Not for use on edges. 125 Ø Rubber extraction rings The flexible rubber vacuum ring moves smoothly over the surface and provides optimum protection against dust and stones flying out. Concrete grinder head without disc 125 Ø Ø Screed-Whirljet for abrasive materials: Abrasive screeds (with quartz sand), fresh concrete, plaster, abrasive limestone (with quartz sand) sandstone, fire clay, asphalt. Reduced weight, with FLEX special flange - only to be used on the FLEX longneck renovation grinder. Not to be used for working on edges. 125 Ø Concrete-Whirljet the grinding disc for concrete: old concrete, concrete slabs and stone - natural and artificial slabs, lime sand brick hard, paving slabs, tile glue, removing glazing from ceramic tiles. Reduced weight, with the FLEX special flange - only to be used on the FLEX long-neck renovation grinder. Not to be used on edges. 125 Ø

81 Accessories renovation sanders LD 1709 FR LDC 1709 FR LD 3206 C Accessories for LD 1709 FR, LDC 1709 FR and LD 3206 C scouring machines 4 Dry grinding diamond cups Thermojet Super for surface grinding on thermo-plastic layers, coated sidewalk plates, for balcony and concrete renovation. The ingenious backing pad with the angled diamond segments in double rows ensure a roughly 30% faster work progress as compared to conventional backing pads. Thanks to the high of specially shaped segments and the oval and patented turbo extraction bore holes (on the 125 pad) an ultra-strong air suction is created. It extracts the aggressive swarf, prevents the plugging and overheating of the segments and reduces the wear. No presanding necessary. Calm, reduced-vibration operation due to precise balancing. No hooking on rough surfaces. Not suited for working on edges. 125 Ø Ø Screed Jet for levelling screed. Accessory for the FLEX cement grinder for levelling and removing screed. For sanding down sandstone. Fast work because of strong diamond segments that are embedded in rip-proof elastic support linings. 125 Ø Ø Diamond cup wheel Turbo-Jet for concrete, optimum material removal with very quiet running 125 Ø Special cup wheel with polycrystalline diamonds The new dimension for removing thermal coatings, suitable for fast, effortless stripping of problem coatings. 125 Ø x 22, Rubber extraction rings The flexible rubber vacuum ring moves smoothly over the surface and provides optimum protection against dust and stones flying out. 125 Ø Ø Disc guard with removable edge segment Retrofitting kit, consisting of a protective guard with removable edge segment and special clamping flange SW 14 ( no ). 125 Ø Disc guard with pivoting edge segment Plastic multi-carrying case Perfect fitting, impact resistant carrying case, universally adaptable for many different FLEX- Maschines 125 Ø

82 Bushhammers LST 1503 VR LST 803 VR Bushhammer for stairs Bushhammer for stairs and large surfaces 4 VR full-wave electronic control: with speed selection and constant speed control, soft start, overload protection. Working width adjustable: 3 stages from approximately 40 mm up to 92 mm. Guide: continuously adjustable for precise work along stone edges Dust extraction: for use in occupied buildings Fitted with 60 aggressive carbide tips, the power tool rapidly and precisely copes with all roughening work Rotating tool head on rubber bearings, reducing noise and vibration and increasing the life of the drive unit The grip guard directly over the tool enables precise guidance of the power tool VR full-wave electronic control: with speed selection and constant speed control, soft start, overload protection. Working width adjustable: 7 stages from approximately 55 mm to about 130 mm. Guide: continuously adjustable for precise work along stone edges Dust extraction: for use in occupied buildings Fitted with 80 aggressive carbide tips, the power tool rapidly and precisely copes with all roughening work Sits comfortably in the hand and has a grip guard and a shaft handle, making it easy to guide Rotating tool head on rubber bearings, reducing noise and vibration and increasing the life of the drive unit SPECIFICATIONS LST 1503 VR SPECIFICATIONS LST 803 VR Speed without load rpm Speed without load rpm Power input 1200 watt Power input 1800 watt Power output 700 watt Power output 1200 watt Working width mm Working width mm 5,90 kg 7,20 kg STANDARD EQUIPMENT 1 grip cover stop, complete carbide tipped complete 100 Ø hexagon socket screw key, special tool pin wrench STANDARD EQUIPMENT 1 grip cover stop, complete carbide tipped complete 140 Ø hexagon socket screw key, special tool pin wrench Accessories for FLEX-bushhammers Spare HM discs: for LST 1503 VR: 6 pieces, no ; for LST 803 VR: 8 pieces, no ; Spare mounting with 2 HM wheels for LST 1503 VR and LST 803 VR: no

83 Scouring machines FS 3403 VRG HPI Scouring machine for building renovation work Plaster Hedgehog scouring machine clears plaster, concrete and screed 4 VR microprocessor control: speed selection, tachogenerator constant speed control, soft start, restart protection after power failure, overload protection and temperature monitoring Vacuum hood: with stepless height adjustment Sturdy milling discs: from high quality carbide Vacuum attachment Adjustable speed makes it suitable for a wide range of tasks: stripping plaster, milling away concrete shuttering protrusions, touching up small repair areas on thermal insulation facades The tool has 2 handles, allowing optimum control and operation: shaft handle with switch-on lock and bow handle Starting-current limitation Vacuum hood: with stepless height adjustment Connection to external dust extractor using the supplied adapter Sturdy milling discs: from high quality carbide 7 milling axes with 28 flat-toothed milling discs Ideal for working on large areas: stripping plaster, roughening concrete, smoothing shuttering joints and screed SPECIFICATIONS Milling head Ø Working width Max. milling depth Speed without load Power input Power output FS 3403 VRG 85 mm 76 mm 5 mm rpm 1400 watt 880 watt 3,00 kg SPECIFICATIONS HPI 603 Milling head Ø 150 mm Max. milling depth 5 mm Speed without load 2400 rpm Power input 1200 watt Power output 700 watt 6,80 kg STANDARD EQUIPMENT 12 flat tooth milling disc bail handle universal adapter hexagon socket screw key 1 piece 1 Torx-wrench 1 piece 1 metal carrying case STANDARD EQUIPMENT 28 flat toothed milling discs side handle socket wrench tommy bar pull-off fixture adapter 32/36 mm Ø metal carrying case 1 piece 80

84 Accessories for scouring machines Accessories for FS 3403 VRG Carbide pointed tooth milling discs 12 flat milling discs for replacement, made of solid carbide alloy. For light, soft plaster. Also for removing carpet adhesive residues when a clean, smooth base is required Accessories for concrete and screed scouring machine HPI 603 Carbide pointed tooth milling discs 28 replacement flat milling discs, solid carbide. For light soft plaster and removing carpet adhesive residues when a clean smooth surface is required pointed milling discs for replacement, made of solid carbide alloy. For removing hard plaster and cement. For removing carpet adhesive residues when a roughened base is required replacement pointed solid carbide milling discs for removing hard plaster and cement. Also for removing carpet adhesive residues when a roughened surface is required Milling head complete To switch quickly from sharp to flat milling discs. Complete with twelve flat HM milling discs (order ) To switch quickly from flat to sharp milling discs. Complete with twelve sharp HM milling discs (order )

85 4 Powerful in every position. The wall chaser MS 1706 FR cuts grooves effortlessly into walls, limestone and porous concrete. Its patented, swivelling motor makes horizontal push cutting as well as vertical pull cutting possible. The FLEX wall chaser. It's all in the turn. Milling cuts with 2 parallel running FLEX high-performance diamond cutting discs. The middle partition can then be broken out using the supplied slot breaker. Only the FLEX wall chaser allows changeover from vertical pull cutting to horizontal push cutting. Unlock, swivel the motor, lock finished! Fatigue-free working in both directions! Working direction Working direction 82

86 Floor and wall finishing It does not matter in which direction you are cutting. The swivelling vacuum hose adapter allows for hinderence free working. The disc guard can be opened and the quick-clamp nut can be loosened without any additional tools. In this way you can switch the diamond cutting discs and quickly re-arrange the distance rings according to the desired groove width. You can use the scale - which is divided into 5 mm increments - on the disc guard to set how deep the milled cut should be. 4 Working direction Patented swivel-mounted motor (patent no ) allows for push and pull cutting. Microscopic imaging of a conventional diamond cover clearly shows insufficient integration of the diamond grain into the bond, as well as cavities in the binding system. This leads to premature breaking of the grain and a large amount of wear and tear. Diamond Microscopic photo of the Diamantjet VI - Speedcut with HDS technology. The binding components are very homogeneous and show high density and complete integration of the diamond grit. This ensures long life of the diamond and use to its full potential, guaranteeing continued good cutting qualities over a long period. Despite the low power consumption of the motor and the low force required, a high speed of cut is achieved. 83

87 Wall chaser MS 1706 FR-Set Wall chaser for push and pull cutting 4 FR electronic control: with tachogenerator constant speed control, soft start, overload protection and temperature monitoring Patented swivel-mounted motor (patent no ) allows for push and pull cutting. Optimal dust extraction and maximum safety due to enclosed guard Toolless blade changing and slit width adjustment Rotating adaptor for dust extractor Tool-free cutting depth adjustment Plunge cut stop Chases two parallel slots up to 35 mm deep and 30 mm wide Slot breaker for easy removal of the remaining material without a hammer SPECIFICATIONS MS 1706 FR-Set Cutting depth 0-35 mm Groove width mm Disc Ø 140 mm Speed without load 7500 rpm Power input 1400 watt Power output 950 watt Tool fixture M 14 3,70 kg STANDARD EQUIPMENT Diamantjet VI-Speedcut-cutting disc 140 mm Ø (2x) 1 side handle SDS-Clic quick-clamp nut M Distance spacers (5x) Clamping flanges (2x) 1 web remover adapter for dust extractor Cable clip (3x) 1 plastic carry case

88 Accessories wall chasers MS 1706 FR-SET Accessories for wall chaser MS 1706 FR-Set Diamantjet VI - Speedcut For cuts in walls, limestone, concrete and gas concrete. Thanks to the innovative HDS (high density sintered) technology, which can be recognised by the high density and homogeneity of the binding components, the Speedcut cutting disc stands out due to its uniform willingness to cut, its long life span and the overheating protection it offers. Due to the ribbed cover, only minimal pressure needs to be applied and the swarf is removed quickly: the workpiece is sliced through cleanly and smoothly. 140 Ø Sharpening stone for diamond tools 320 x 160 x

89 86

90 Industrial vacuum cleaners FLEX industrial vacuum cleaner. For the good of your health! Their filter systems intercept all dust even health-harmful substances. This provides even more safety during dry and wet operation. And before the filter becomes clogged, it is automatically cleaned without interrupting the work process. The suction power remains constant, and there is no down time for filter cleaning! 5 87

91 The perfect coordination includes the new storage system. The full advantages of the new WST 700 VV Vario-Giraffe unfolds only in combination with an efficient vacuum cleaner like the S 47 or S 47 M. 5 The 12 best advantages of the FLEX industrial vacuum cleaners 1. Integrated flat-fold filter Is extremely flat and, different from cartridge filters, does not reach into the container. Thus the container can be used 100% and the filter remains absolutely dry even during wet vacuuming. 2. Filter cleaning Can be activated in running operation at any time by pressing the filter-clean switch on the handle on the S 36 model. This is carried out automatically on the S 47 and S47 M models. 3. reinforced paper bags Extra rip-proof and safe even with sharp-edged objects. 4. Deposit tray and holders Keep hoses and accessories tidy. New tool storage system on S 47 and S 47 M for FLEX products: WST 700 VV and MS 1706 FR (see Accessories). 5. Bayonet turn catch The suction hose connection rotates and is fastened by bayonet: no twisting, no accidental loosening of the suction hose during operation. 6. Drive motor with bypass ventilator Vacuum air and motor cooling air blow separately in two channels. Dirty vacuum 88 air is not fed through the motor. This protects the motor and increases the vacuum performance. 7. Power tool outlet To connect other tools. Starts and stops the vacuum as the machine is switched on and off. With 15-second automatic after-running. 8. Housing The impact-resistant, recyclable plastic housing is tough, light, easy to clean, and corrosion-free. 9. Smooth-running carriage Two large wheels and two doublecastoring rollers with locking brakes. 10. Sound insulation hood The suction turbine is encapsulated; operating noise is greatly reduced. 11. BIA dust class L (S 36, S 47) Dust with MAK values > 1 mg/m3 12. BIA dust category M (S 47 M) Dust with MAK values > 0.1 mg/m3 Wood dust up to max. 1,200 W/50L Paint dust Ceramic dust Dust from synthetic materials Dirt, swarf, liquids all gone: FLEX industrial vacuum cleaner S 36, the all-round vacuum cleaner. Clean and healthy working the Flex industrial vacuum sucks up dust and dirt where it is made: direct from the power tool.

92 Industrial vacuum cleaners Illustration Funktion Flachfaltenfilter Flat folded filter Foto Detail Ablagesystem Fine dust Coarse dust The innovative flat-fold filter system with the flat-fold filter at the top allows full use of the container volume. On the S 47 and S 47 M models, the flat-fold filter is automatically cleaned by a percussive pressure reversal every 15 seconds. There is no loss of suction at the end of the hose throughout the cleaning process. Downtimes for filter cleaning/changing are therefore a thing of the past. The fold-out filter cover provides easy access to the main filter element from the cleanair side. 5 Overview of the FLEX extraction system FLEX electrical power tool with extraction nozzle: Matching adapter for suction hose: Universal adapter Can be trimmed to 3 Ø: from 25mm to 32mm Ø no FLEX suction hose with snap connection: FLEX industrial vacuum cleaners S 36, S 47 and S 47 M: Universal adapter Can be trimmed to 3 Ø: from 25mm to 32mm Ø no Suction hose extension with snap connection Adapter 32/28 Reduction of 32mm to 28mm Ø no e.g. extraction nozzle of the FLEX HPI 603 scouring machine Adapter 32/32 from 32mm to 32mm Ø no Adapter 32/36 Expansion from 32mm to 36mm Ø no no

93 Industrial vacuum cleaners S Multi-purpose vacuum cleaner with filter cleaning system 5 Connection for power tools: up to 2200 watt power input Automatic switch-on and 15 seconds run-on Patented filter vibration: vibration at the press of a button on the vacuum hose Suitable for wet vacuuming: with electronic liquid level control Suction hose with minimum flow resistance for optimal extraction For dust, dirt, chips and liquids Approved for dust class L Extra rip-proof filter bags Even sucked-up bits of stone cause no damage. SPECIFICATIONS S 36 Filter surface 6200 cm2 Power input 1200 watt Max. air flow rate 56 l/sec Max. vacuum 235 mbar Container volume 35 l 10,00 kg With plug for power tools. Plug in start saw the vacuum starts up immediately and continues running for 15 seconds after the Tool is switched off. STANDARD EQUIPMENT 4 m vacuum hose 32 mm Ø with 32/28 mm Ø adapter, mm Ø universal adapter and vacuum hose extension 1 filter bag 1 piece 1 flat folded filter elbow ,5 m metal vacuum tube (2x) 1 floor nozzle complete with carpet combination insert crevice nozzle

94 Industrial vacuum cleaners S Special industrial vacuum cleaner with automatic filter cleaning system Automatic flat-fold filter cleaning system Continuous automatic flat filter cleaning ensures no loss of suction Full utilization of the container volume ensures problem-free vacuum extraction of large amounts of dust Innovative cleaning system brings longer life and reduces maintenance costs Stepless motor speed control for individuel setting of vacuuming power Suitable for wet vacuuming: with electronic liquid level control Suction hose with minimum flow resistance for optimal extraction Connection for power tools: up to 2200 watt power input Automatic switch-on and 15 seconds run-on No paper filter bag necessary. The S 47 and S 47 M industrial vacuum cleaners have been specially developed for use without a paper filter bag, since paper filter bags clog up after only a short time extracting mineral dust and therefore block the airflow. Waste bags can be used for low-dust emptying of the container. Approved for dust class L Tidy tray for the S 47 Ideal for keeping cable and hose orderly and for resting Vario-Giraffe or wall chaser. 5 SPECIFICATIONS S 47 Filter surface 6200 cm2 Power input 1380 watt Max. air flow rate 61 l/sec Max. vacuum 230 mbar Container volume 45 l 13,50 kg STANDARD EQUIPMENT 4 m vacuum hose 32 mm Ø with 32/28 mm Ø adapter, mm Ø universal adapter and vacuum hose 1 piece extension 1 flat folded filter elbow ,5 m metal vacuum tube (2x) 1 floor nozzle complete with carpet combination insert crevice nozzle PP waste disposal bag

95 Industrial vacuum cleaners S 47 M Special class M vacuum cleaner with automatic filter cleaning system 5 Safety filter system: conforms to dust category M, maximum permeability < 0.1 %, specifically for health-harmful materials Automatic flat-fold filter cleaning system Acoustic flow-rate monitor: continuous automatic cleaning of flat filter prevents loss of suction under all conditions Exhaust diffusor: Protection against raising dust due to exhausts Connection for power tools: up to 2200 watt power input Full utilization of the container volume ensures problem-free vacuum extraction of large amounts of dust Innovative cleaning system brings longer life and reduces maintenance costs Suitable for wet vacuuming: with electronic liquid level control Automatic switch-on and 15 seconds run-on Antistatic hose elements No paper filter bag necessary. The S 47 and S 47 M industrial vacuum cleaners have been specially developed for use without a paper filter bag, since paper filter bags clog up after only a short time extracting mineral dust and therefore block the airflow. Waste bags can be used for low-dust emptying of the container. We recommend this vacuum cleaner for use with our electrical power tools: LD 1709 FR, LDC 1709 FR, LD 3206 CD, FS 3403 VRG, HPI 603, MS 1706 FR, WST 700 VV, WST 1000 FV, WS 702 VEA, WSK 702 VEA, WS 1505 FR - in all applications in which mineral dust is generated. SPECIFICATIONS Filter surface Power input Max. air flow rate Max. air flow rate according to EN Max. vacuum Container volume S 47 M 6200 cm watt 57 l/sec 35 l/sec 235 mbar 45 l 11,50 kg STANDARD EQUIPMENT 1 flat folded filter elbow ,5 m metal vacuum tube (2 x) 1 PP waste disposal bag m vacuum hose 32 mm Ø with adapter 32/28 mm Ø. Universal adapter mm Ø and 1 piece antistatic suction hose extension. 92

96 Industrial vacuum cleaner accessories Accessories for FLEX industrial vacuum cleaners S 36, S 36 M, S 47 and S 47 M Fleece filter bags Filter bag with FLEX VacuFleece technology for the S 36 and S 36 M. Double volume capacity and significantly better suction capacity compared to paper filter bags. Highly tear resistant due to 4-layered VacuFleece material: offers protection against damage from sharp objects. Resistant to unintentional wet vacuuming or damp material. Flat folded filter Sturdy and ultra-strong flat-fold filter with special nanocoating. Extremely long-life filter, superb suction results, ensuring a high level of economy. For S 36, S 36 M, S 47 and S 47 M Adapter Adapter 32/28 mm, for connecting machines with 28 mm Ø vacuum attachment to 32 mm vacuum hose. Paper-Filter bags Filter bag for S 36 and S 36 M Adapter rotating Adapter 32/32 mm, for connecting a machine with 32 mm Ø vacuum cleaner outlet (e.g. renovation sander or angle grinder with cutting guard) with 32 mm vacuum hose. Paper-Filter bags Filter bag for S 47 and S 47 M Disposal sack For S

97 Industrial vacuum cleaner accessories Adapter Cable clip Adapter 32/36 mm, for connecting machines with 36 mm Ø extraction connection (e.g. HPI 603) with 32 mm suction hose For fixing power tool cable to vacuum hose, suitable for mm external Ø Universal adapter for universal connection of machines with mm Ø extraction connection with 32 mm suction hose, adapter can be trimmed to 3 different diameters Universal adapter for universal connection of machines with mm Ø extraction connection with 32 mm suction hose, for adapter with snap connection, can be trimmed to 3 different diameters Vacuum tube Vacuum hose Metal vacuum tube, 0.5 m long, galvanized mm internal Ø, with snap coupling, 4.0 m long, temperature resistant to 70 C, incl. coupling bush for vacuum, filter-free switching module with snap coupling, vacuum hose extension, 32/28 mm adapter and universal adapter for S 36 and S 36 M. 5 Special adapter With metal ring, for connecting the 32 mm vacuum hose to the original Giraffe and Okapi vacuum attachment mm internal Ø, with snap coupling, 4.0 m long, temperature resistant to 70 C, incl. coupling bush for vacuum, 32/28 mm adapter and universal adapter for S 47 and S 47 M. Rotating suction adapter The adapter can be rotated and connects the vacuum cleaner to the 32-mm vacuum hose

98 Industrial vacuum cleaner accessories Anti-static vacuum hose Nozzle Vacuum hose extension The anti-static system prevents the generation of electrostatic charges 32 mm internal Ø, with snap coupling, 4.0 m long, temperature resistant to 70 C, incl. coupling bush for vacuum, 32/28 mm adapter and universal adapter. For S 47 and S 47 M For connecting the vacuum hose snap coupling to the adapters 32/28 mm, 32/32 mm, 32/36 mm and the universal adapter. Crevice nozzle Upholstery nozzle Coupling bush Floor nozzle, complete with carpet and combination insert For connecting two FLEX vacuum hoses Carpet insert for use with the floor nozzle Vacuum hose snap coupling repair kit Coupling bush for vacuum hose with snap coupling, 3-part Combination insert for use with the floor nozzle Elbow For connecting the vacuum hose and vacuum tube, with snap coupling Storage system for S 47, S 47 M Fit on to the industrial vacuum cleaner for the WST 700 Giraffe or MS 1706 wall chaser and vacuum hose

99 96

100 Cleaning technology 6 FLEX terso AS 28: the cleaning machine that knows no bounds. Cleaning stairs and other hard-to-reach areas used to be a timeconsuming manual job. This has all been changed by the FLEX terso that quickly and effortlessly solves difficult cleaning problems not least because of its ergonomic design. At the same time, the terso opens up a whole new range of applications for you. Try it out for yourself! 97

101 Cleaning technology Intelligent technology for professional users. Accurate dispensing: the liquid pressure tank 6 Additional hand grip short-grip variant Powerful and gentle: the cleaning head with two water jets, including a revolving guard with a brush ring to prevent water spray 98

102 Cleaning technology Efficient Lithiumion battery Two-speed gear unit; powerful motor 6 A package with something for you. The terso represents uncompromising quality, made by FLEX in Steinheim. This involves high-grade materials, perfect craftsmanship in production, refined technology and easy operation: Bayonet fitting for convenient tool-free brush change. A special snap-lock fitting ensures that the brushes are held securely. The terso is designed to be functional: with a moving splash guard, water jets, high-performance drive and a rotating cleaning head. Four ergonomically placed hand grips make the most diverse of applications effortless and user-friendly The cleaning head swings in two axes and automatically adjusts to your working angle. Two speed (650/1,800 rpm) ensure the right cleaning power. The bayonet fastener allows tool-free accessory changing. The protective hoop prevents impact damage to the terso and also serves as a handle. The terso can be connected to external water feeds. The FLEX terso delivery package sets you up, ready to go. More information about the comprehensive accessory range is set out on the next pages and can also be obtained at 99

103 6 Where others have no idea, the FLEX terso AS 28 is ideal. The microfibre pad is ideal for dry and wet cleaning of smooth surfaces. 100

104 Cleaning technology The cleaning brush is particularly suitable for ground-in dirt In conjunction with the extensive accessories range, the applications of the terso are practically unlimited. 6 Stairs can be properly cleaned without the user needing to bend. Ideal for cleaning those hard-to-access areas. 101

105 Cleaning technology Step by step to a bright shine: the diamond polishing system A very wide accessory range allows you to quickly make the FLEX terso into a tailor-made tool for a large of applications. The accessories on this page enable you to polish natural and synthetic stone floors step by step to a deep shine, using special pads, without any chemical additives - even in small, hard-to-reach areas. See for yourself! In 3 steps to a bright shine Diamond polishing system Phase 1 Phase 2 Phase 3 6 Polishing pad silver 800 grit Polishing pad yellow 1500 grit Polishing pad green 3000 grit Pre-polishing and elimination of light scratching and tool marks Polishing for a gleaming surface Bright shine polishing, keeping the shine, maintenance cleaning No No No Also available as a set Polishing pad set Comprising 1 x silver, 1 x yellow, 1 x green. No

106 Cleaning technology AS NEW FLEX terso: the cleaning machine for small areas, hard-to-reach places and stairs High-power rechargeable lithium-ion battery 3,0 Ah Four ergonomically positioned hand-grips The tilting cleaning head features a full brush skirt and a rotatable hood to protect against splashing water Bayonet fitting for tool-free accessory change The terso can be connected to an external water supply point Universal dry and wet cleaning Pressure tank for cleaning liquid Ideal for hard-to-reach areas, for cleaning and gentle preparation of various surfaces, including polishing 6 SPECIFICATIONS AS 28 Battery voltage 28 V Battery capacity 3,0 Ah Power input 800 watt No load speed 1st gear rpm No load speed 2nd gear rpm with battery 8,60 kg Tank volume 1l STANDARD EQUIPMENT 1 cleaning brush with splash guard double sides backing pad charger Battery pack (2x) 1 polstered shoulder strap padded carrying bag

107 Accessories for cleaning systems Accessories for AS 28 Universal sponge pad Universal pad for cleaning on smooth surfaces. Porcelain stoneware sponge pad 200 Ø Highly absorbent sponge pad for use on porous surfaces. Only used wet. 200 Ø Polishing pad silver Polishing pad yellow Polishing pad green First step of the diamond polishing system. For pre-polishing and removing smaller scratches and tracks. Grit 200 Ø grit Second step of the diamond polishing system. For polishing and manufacturing a shining surface. Grit 200 Ø grit Microfibre pad For dry and wet cleaning on smooth surfaces. 200 Ø Polishing pad set Third step of the diamond polishing system. High gloss polishing, gloss preservation, maintenance cleaning. Grit 200 Ø grit Cleaning brush with splash guard For use on hard surfaces. 200 Ø For pre-polishing, polishing and high-gloss polishing in three steps. Consisting of polishing pad 1 x silver, 1 x yellow, 1 x green. 200 Ø Cleaning brush with spray protection, soft With soft-care bristles to protect the surface. 200 Ø

108 Accessories for cleaning systems Double sided backing pad Double-sided carrier for grinding and polishing pad/sponge and microfibre pad - for simple and toolless change. 200 Ø Padded carrying bag The clean holdall for the machine and accessories. Also protects against damage Polstered shoulder strap Especially for long-term employments Battery pack Lithium ionen accu with 28 V/3 Ah Charger Charging time approx. 60 min for Li-Ion battery pack 28 V/3 Ah

109 106

110 Saws Eager to cut pipes, profiles and angles: FLEX saws for the professional 7 At the head of the list is the unique SKL 2903 VV Tiger Claw reciprocating saw (sabre saw). With articulating joints it allows you to saw in the tightest corners without even needing to bend your knees. Additional power packages include pipe reciprocating saws, pendulum jigsaws, metal-cutting circular saws and circular saws for wood, metal and stone, backed by and extensive accessories range. 107

111 Saws... pipes in remotest corner. A reciprocating saw for any job. Saw pipe corners... Simply turn the joint and continue sawing! Special reciprocating saw Tiger Claw SKL 2903 VV with 3-D function joint 7 Whether for metal, plastic, or wood; FLEX has Tool-free FLEX Quik-Change saw-blade replacement system: turn tool holder, exchange saw blade and continue sawing. Pipe sawing exactly at right angles. Simply fasten the pipe bracket and put on the power. Pipe reciprocating saw SR 602 VV Chain clamp fixture for SR 602 VV. Fits for steel pipes from 13 mm to 150 mm and plastic pipes up to 200 mm. 108

112 Saws Metal-bandsaw SBG 4908 in stand or free hand working for universal applications. the right professional saw for any material. 7 When cut-off grinders aren't suited to or cannot perform a clean cut, the CSM 4060 cuts everything without sparks: panels, profiles, corrugated sheets, composite materials, and much more. Unobstructed view of the saw blade. Quite practical for bevel cuts. Circular saw CS 3455 A Especially in fire hazardous surroundings the SBG 4908 for spark free cutting of metal. 109

113 Sabre saws S 2902 VV-Basic SKE 2902 VV watt universal reciprocating saw with accelerator trigger switch 1200 watt reciprocating saw with orbital cutting action VV electronic control: with constant stroke control, soft start with continuous speed control trigger Durable 1200 watt high-power motor Soft-grip handle: eliminates most of the vibration and ensures non-slip handling Universal saw blade holder: for an easy saw blade exchange Saw blade reverses to allow over-head sawing Tilt-adjustable saw support for accurate application to workpiece VV electronic control: with constant stroke control, soft start with continuous speed control trigger Durable 1200 watt high-power motor Orbital stroke: switch-activated, especially for fast sawing through wood Soft-grip handle: eliminates most of the vibration and ensures non-slip handling Quick-Change: Exchange saw blades quickly without tools with the stainless steel saw blade tool holder Saw blade reverses to allow over-head sawing Tilt-adjustable saw support for accurate application to workpiece, with 4-step tool-free depth adjustment 7 SPECIFICATIONS S 2902 VV-Basic SPECIFICATIONS SKE 2902 VV Orbit rate, without load rpm Orbit rate, without load rpm Orbit 28 mm Orbit 28 mm Power input 1200 watt Power input 1200 watt Power output 670 watt Power output 670 watt 3,80 kg 4,00 kg STANDARD EQUIPMENT 1 assortment of saw blades hexagon socket screw key, special tool 3 16" hexagon socket screw key, special tool 5 32" plastic carry case 1 piece STANDARD EQUIPMENT 1 assortment of saw blades plastic carry case 1 piece 110

114 Sabre saws SKL 2903 VV Tiger Claw sabre saw with 3-D articulation VV electronic control: with constant stroke control, soft start with continuous speed control trigger Two joints facilitate almost unlimited positioning possibilities Quick-Change: Exchange saw blades quickly without tools with the stainless steel saw blade tool holder Tilt-adjustable saw support, with 4-step tool-free depth adjustment Soft-grip handle: eliminates most of the vibration and ensures non-slip handling Push-button unlocks middle joint, allowing it to swing through 180 and latch in 13 positions Front joint rotates axially through 360 and latches in 12 steps SPECIFICATIONS SKL 2903 VV SKL 2903 VV: the 3-D function joint Gets into every corner. 7 Orbit rate, without load rpm Orbit 29 mm Power input 1200 watt Power output 650 watt 4,00 kg STANDARD EQUIPMENT 1 assortment of saw blades saw blade adapter plastic carry case 1 piece 111

115 Sabre saws SR 602 VV SK 602 VV Variable-speed pipe sabre saw with pipe clamp Variable-speed sabre saw with pipe cutting support High-efficiency motor for heavy-duty material removal VV electronic control: with constant stroke control, soft start with continuous speed control trigger, overload protection and speed selector wheel Orbital stroke: selective For sawing pipes up to 4" at an exact right angle, without exerting high force With a chain clamping fixture (accessory order no ). Can be used for sawing steel pipes up to 6" and plastic pipes up to 8" Extremely rugged and powerful version with large rectangular thrust bar for high loading when used with a pipe clamp or chain clamping fixture High-efficiency motor for heavy-duty material removal VV electronic control: with constant stroke control, soft start with continuous speed control trigger, overload protection and speed selector wheel Orbital stroke: selective Standard cutting support Adjustable pipe cutting support for pipes up to 1 ½" Acceleration trigger: sensitive sawing at the first cut With reinforced thrust bar guide and adjustable saw stop 7 SPECIFICATIONS SR 602 VV SPECIFICATIONS SK 602 VV Orbit rate, without load rpm Orbit rate, without load rpm Orbit 27 mm Orbit 27 mm Power input 1300 watt Power input 1300 watt Power output 850 watt Power output 850 watt 4,40 kg 3,90 kg STANDARD EQUIPMENT 1 side handle hexagon socket screw key, special tool standard cutting support assortment of saw blades 1 set 1 pipe clamp for pipes up to 2" plastic carry case Chain clamp fixture for SR 602 VV Chain clamp fixture for SR 602 VV. Fits for steel pipes from 13 mm to 150 mm and plastic pipes up to 200 mm. no STANDARD EQUIPMENT 1 side handle hexagon socket screw key, special tool standard cutting support assortment of saw blades 1 set 1 spare clamp for sabre saw blade pipe cutting support plastic carry case

116 Band and circular saws SBG NEW Metal-cutting band saw with swivelling saw frame 2 belt speeds: for sawing solid and hollow sections Recommended belt speeds: Step I, solid steel, stainless steel V2A, aluminium; Step II, steel, stainless steel V2A, aluminium tubes Cutting without a stand: with 90 straight cut, round and square section, max. 90 mm, rectangular section max. 150 x 90 mm Continuous tool-free adjustment of the cutting angle from 0 45 With stand, easy release for freehand use With bracket locking device: for mobile applications and easy transport 3-point ball-bearing bandsaw blade guide for optimum blade control Safety switch: prevents uncontrolled reactivation following power interruptions Work without coolant Release for freehand use 7 SPECIFICATIONS SBG 4908 Power input Power output of saw band Belt speed per minute Max. cutting range: round cross sectional cut at 45 /90 Max. cutting range: square cross sectional cut at 45 /90 Max. cutting range: rectangular cross sectional cut at 45 /90 of saw arm (complete unit) 850 watt 445 watt 1335 x 13 x 0,65 mm 60 / 80 m/min 70 mm / 85 mm 70 mm / 85 mm 70x70 mm / 100x85 mm 7,9 kg 18,0 kg Cutting angle adjustment STANDARD EQUIPMENT 1 bimetal saw blade 1 item from

117 Band and circular saws CS 3455 A CSM Hand circular saw with 55 mm depth of cut Metal-cutting circular saw for dry cuts Pivoting base plate: with exact angle scale for mitre cutting from 0 to 45, tool-free adjustment Safety switch: with lock-off switch Chip duct: for optimum chip removal Dust extraction: with direct connection to the universal adapter of the FLEX industrial vacuum cleaner Cut line indicator for sawing to mark Rugged diecast aluminium saw housing Tool-free adjustable cutting depth For accurate metal cutting without coolant Tool-free adjustable guide plate, continuous saw depth adjustment to 63 mm Chip collection compartment with sight glass: large capacity, tool-free emptying Special carbide-tipped saw blades: nearly burr-free cuts, trimming threaded bars possible without recutting the thread Spindle lock Switch: with lock-off / lock-on switch - Solid material / flat steel: 6 mm; - Round material: 20 mm; - Hollow sections: 63 mm 7 SPECIFICATIONS CS 3455 A Blade Ø 160 mm Saw blade drill Ø 20 mm Max. cutting depth (45 ) 0-38 mm Max. cutting depth (90 ) 0-55 mm Pivoting range 0-45 Speed without load 4700 rpm Power input 1100 watt Power output 660 watt 3,70 kg SPECIFICATIONS CSM 4060 Blade Ø 185 mm Saw blade drill Ø 20 mm Max. cutting depth (90 ) 0-63 mm Max. material thickness in steel 400 N/mm² 6 mm Max. material thickness in aluminium 250 N/mm² 10 mm Speed without load 3800 rpm Power input 1400 watt Power output 720 watt 5,40 kg STANDARD EQUIPMENT 1 carbide tipped saw blade, 12 teeth (160 x 20 mm) parallel stop open-ended wrench hexagon socket screw key, special tool STANDARD EQUIPMENT Carbide tipped saw blades for steel, 38 teeth (185 x 20 mm) (2x) 1 parallel stop ring / open-ended wrench plastic carry case 1 piece Maximum cutting depths: - Solid material / flat steel: 6 mm; - Round material: 20 mm; - Hollow sections: 63 mm 114

118 Accessories saws Accessories for SBG 4908 Sabre saw blade for wood, plaster, porous concrete and other applications Saw blades Bandsaw blades, bimetal M 42. Teeth per inch Length 8/ All wood types. Teeth per inch Wood with nails, bi-metal. Length Accessories for SK 602 VV, SKE 2902 VV, S 2902 VV-Basic and SKL 2903 VV Sabre saw blades for metal and sheet material Hard metals, 1.15 mm and thicker, bi-metal. Teeth per inch Length Wooden board (coarse/standard cuts). Teeth per inch Length Teeth per inch Length Hard metals, 3.0 mm and thicker, bi-metal. Teeth per inch Length Hard metals, 1.15 mm and thicker, bi-metal. Teeth per inch Length Wooden board (coarse/standard cuts). Teeth per inch Coarse rapid cuts in wood. Length Teeth per inch Coarse rapid cuts in wood. Length Teeth per inch Length Hard metals, 1.15 mm and thinner, bi-metal. Teeth per inch Length Coarse rapid cuts in green-wood. Teeth per inch Length Long metal strip 3-10 mm, bi-metal. Teeth per inch Length Plaster, porous concrete, eternit, non-ferrous metal, glass-fiber reinforced plastic, carbide tipped. Teeth per inch Length Hard metals, 3.0 mm and thicker (also for palette repair), bi-metal. Teeth per inch Length Plaster, porous concrete, eternit, non-ferrous metal, glass-fiber reinforced plastic, carbide tipped. Teeth per inch Gypsum boards, porous concrete. Length Hard metals, 1.50 mm and thicker, bi-metal. Teeth per inch Trapezoidal sheet metals. Length Teeth per inch Length Sabre blade assortment for plastic/wood/metal Consisting of: 1 Plastic saw blade, 150 mm: ; 1 Wood saw blade, 150 mm: ; 1 Metal saw blade, 150 mm: , all bi-metal. Teeth per inch Length Length

119 Accessories saws Accessories for SR 602 VV Chain clamp fixture Pipe saw blades Pipe Ø up to 2", wall thickness from 3.0 mm. Teeth per inch Length Pipe Ø up to 4", wall thickness from 3.0 mm. Teeth per inch Length Pipe Ø up to 6", wall thickness from 3.0 mm (only with chain clamp fixture). Teeth per inch Plastic pipe up to 125 mm Ø. Length Teeth per inch Plastic pipe up to 200 mm Ø. Length Teeth per inch Length Fits for steel pipes from 13 mm to 150 mm and plastic pipes up to 200 mm Accessories for free-hand cutting with the SR 602 VV Saw blades for free-hand cutting Pallets - wood/nails. Teeth per inch Length Palettes - wood/nails with variable toothing, bi-metal. Teeth per inch Length 10/ Metal, wall thickness from 1.8 mm. Teeth per inch Length

120 Accessories saws Accessories for SR 602 VV and SK 602 VV Accessories for metal circular saw TCS 3602 Plastic multi-carrying case Perfect fitting, impact resistant carrying case, universally adaptable for many different FLEX-Maschines Saw blades Special HM saw blade, 14 inch (Ø 355 mm), bore Ø 25.4 mm. For universal application. Teeth 355 Ø x 25, Accessories for hand circular saw CS 3455 A Special HM saw blade, 14 inch (Ø 355 mm), bore Ø 25.4 mm. For stainless steel (V2A). With fine toothing for stainless steel cuts, master blade with laser-cut ornaments for a low-noise cut. Very well suited also for sawing sheet metal. HM alternating teeth saw blade For wood or wood-like materials at medium cutting quality (12 teeth). 160 Ø x Teeth 355 Ø x 25, Accessories for metal circular saw CSM 4060 Carbide tipped saw blade for steel For wood or wood-like materials at good cutting quality (36 teeth). Enables a practically burr-free cut, no touching up is necessary. 160 Ø x Teeth 185 Ø x

121 118

122 Screwdrivers, drills, hammers More power. FLEX screwdrivers, drills and hammers. Designed for professional continuous operation constructed appropriately robust for example solid, yet light aluminium gear housing and fully-metal drill chucks on the cordless drills and hammer driver drills ensure enduring stability and long service lives. 8 The user friendliness is exemplary: with non-slip rubber grip to improve the feel in the hand and an ultra-sensitive accelerator trigger switch with quick stop. The benefits are innumerable. 119

123 Lights on with auxiliary battery pack. An LED light is integrated into all ALi screwdrivers. Whether from the mains or battery pack: FLEX-tools have got the power. Advantages of lithium ion technology 8 No memory effect: the battery can be recharged at any time. Powerful: full battery power from the first to the last screw, due to three times higher energy density than NiCad cells, longer life. Low weight, lighter than conventional batteries, better to handle FLEX Protection System: protection from overloading, overheating and excessive discharge. Two speeds on the ALi 10.8G ensure optimum speed selection for drilling and screwdriving. 120 ALi 10.8 G includes an LED lamp in the basic package as a supplementary light source, powered by the auxiliary battery. The easy-change battery pack reduces work interruptions to a minimum.

124 Screwdrivers, drills, hammers High torque long-lasting battery and easy handling all combined in the new FLEX ACH 14.4 LI cordless drill/screwdriver. Ideal for tough construction-site use Robust and powerful. The new 14,4 Volts FLEX cordless driver drills. 8 The optionally available belt holster ensures that the drill/screwdriver is always to hand, so that work can continue without interruption. The ergonomic grip and low weight make the ACH 14.4 LI easy to use in all positions. With two speeds, 15 torque settings and a drill setting, the ACH 14.4 LI can be optimally adjusted for all requirements. 121

125 Cordless machines, Hammer Drill ALi 10,8 B ALi 10,8 G NEW Drill/screwdriver with lithium-ion technology 2 speed cordless drill/screwdriver with lithium-ion technology 11 torque and 1 drill setting Keyless chuck for ¼" bits Exchangeable lithium-ion battery 1,3 Ah No memory effect Integrated LED light Rapid battery charger (charge time 60 min) Small machine with lots of power Ergonomically designed, non-slip, rubberized handle for safe, comfortable working 20 torque and 1 drill set Keyless chuck and motor stop Exchangeable lithium-ion battery 1,3 Ah No memory effect Integrated LED light Rapid battery charger (charge time 60 min) Small machine with lots of power Ergonomically designed, non-slip, rubberized handle for safe, comfortable working Perfect for drilling in wood, plywoods, plastics and metal. Thanks to its compact design it is especially good when working in restricted spaces 8 SPECIFICATIONS ALi 10,8 B Battery voltage 10,8 V Battery capacity 1,3 Ah Torque max. 22 Nm Torque positions 11+1 Speed without load rpm with battery 1,10 kg Tool fixture ¼" bit holder SPECIFICATIONS ALi 10,8 G Battery voltage 10,8 V Battery capacity 1,3 Ah Torque max. 24 Nm Torque positions 20+1 No load speed 1st gear rpm No load speed 2nd gear rpm Chuck Ø 0,8-10 mm with battery 1,10 kg STANDARD EQUIPMENT Battery pack (2x) 1 rapid battery charger Bit set 1 set 1 plastic carry case 1 piece STANDARD EQUIPMENT Battery pack (2x) 1 rapid battery charger LED light Drill and bit set 1 set 1 plastic carry case 1 piece 122

126 Cordless machines, Hammer Drill ALi 10,8 S Impact drill with lithium-ion technology Exchangeable lithium-ion battery 1,3 Ah No memory effect Integrated LED light Externally exchangeable carbon brushes Small machine with lots of power Ergonomically designed, non-slip, rubberized handle for safe, comfortable working Rapid battery charger (charge time 60 min) Spacious shock resistant carry case with metal clasps Rotary stop SPECIFICATIONS ALi 10,8 S Battery voltage 10,8 V Battery capacity 1,3 Ah Torque max. 52 Nm Speed without load rpm Idle blows rpm Tool fixture ¼" with battery 1,20 kg STANDARD EQUIPMENT Battery pack (2 x) 1 rapid battery charger Socket and bit set 1 set 1 plastic carry case 1 piece Blow by blow to the goal. The compact ALi 10,8 S impact screwdriver enables effective working, even in hard-to-access installation conditions

127 Cordless machines, Hammer Drill AC 14, NEW 2-speed cordless drill driver 14,4 V Exchangeable lithium-ion battery 2,6 Ah No memory effect Integrated LED light Quick-action chuck with spindle lock 15 torque settings and 1 drill setting Clockwise and counterclockwise rotation: middle setting: safety lock Charge indicator Rapid battery charger (charge time 60 min) Ergonomically designed, non-slip, rubberized handle for safe, comfortable working Ideally suited for use on the construction site. Max. torque: soft torque 25 Nm, hard torque 75 Nm Two speeds for excellent results in drilling wood, composite wood products, plastic and metal 8 SPECIFICATIONS AC 14,4 Battery voltage 14,4 V Battery capacity 2,6 Ah Torque max. 25/75 Nm No load speed 1st gear rpm No load speed 2nd gear rpm Chuck Ø 1,5-13 mm with battery 1,90 kg STANDARD EQUIPMENT Battery pack (2x) 1 rapid battery charger plastic carry case 1 piece 124

128 Cordless machines, Hammer Drill ACH 14, NEW 2-speed cordless impact drill 14,4 V Exchangeable lithium-ion battery 2,6 Ah No memory effect Integrated LED light Quick-action chuck with spindle lock 15 torque settings and 1 drill setting Clockwise and counterclockwise rotation: middle setting: safety lock Hammer drilling function Charge indicator Rapid battery charger (charge time 60 min) Ergonomically designed, non-slip, rubberized handle for safe, comfortable working Ideally suited for use on the construction site. Max. torque: soft torque 25 Nm, hard torque 75 Nm Two speeds for excellent results in drilling wood, composite wood products, plastic and metal SPECIFICATIONS ACH 14,4 Battery voltage 14,4 V Battery capacity 2,6 Ah Torque max. 25/75 Nm No load speed 1st gear rpm No load speed 2nd gear rpm Impact count rpm Chuck Ø 1,5-13 mm with battery 1,90 kg 8 STANDARD EQUIPMENT Battery pack (2x) 1 rapid battery charger plastic carry case 1 piece 125

129 Cordless machines, Hammer Drill BRL 3501 A watt rotary hammer drill with double ventilator 700 watt high-power motor: with powerful 2,9 Joule impact energy Hammer mechanism: for effortless drilling and chiselling Quick tool change: universal application, with SDS Plus drill chuck or 13 mm quick-release chuck incl. screw adapter Right/left rotation: for turning screws in and out Accelerator trigger switch: for sensitive working even when wearing work gloves Safety ratchet coupling: protects the user in case the drill blocks Hammer-stop: for non-hammering when screwing or drilling with the quick-release chuck Softgrip handle: made of special plastic-rubber composite material for a non-slip grip and precise, low-vibration drilling Depth limit gauge: for precision drilling Heavy-duty carry case: lots of room for standard equipment and accessories 8 SPECIFICATIONS Speed without load Idle blows Single impact energy Tool fixture Max. drill hole Ø in steel Max. drill hole Ø in concrete Max. drill hole Ø in wood Power input Power output Chuck Ø BRL 3501 A rpm rpm 2,90 J SDS-plus 13 mm 26 mm 30 mm 700 watt 300 watt 13 mm 3,10 kg STANDARD EQUIPMENT 1 Softgrip handle drill depth stop screw adapter ¼" quick-clamp chuck Ø mm plastic carry case

130 Accessories for cordless power tools Accessories for cordless machines Rapid charger Battery pack Li-Ion battery pack 10.8 V/1.3 Ah for ALi 10.8 series. Charging time 60 mins. for Li-Ion battery 14.4 V/2.6 Ah LED light Li-Ion rechargeable battery pack 14.4 V/2.6 Ah for AC and ACH. Battery not included. The standard auxiliary battery in the ALi 10.8 V series or battery pack can be used Rapid charger Charging time 60 min for battery pack 10.8 V/1.3 Ah Li-Ion. Holster With this practical holster the machine is always at hand and ready for use

131 128

132 Mixers When the going gets tough, FLEX mixers get going. 9 It has to be compact. It has to be robust. It has to be protected from dirt and damage. Feature a lot of torque. Be comfortable to hold. Many years of experience and intensive cooperation with the professionals in the field have flown into the FLEX mixing machine and mixing head program. The motor, the cooling, and the gears have been designed for tough, continuous operation lasting for hours. And the mixing heads made of powder-coated, high-quality metal feature stable weld joints, burr-free edges, and circumferential protection rings. Robust quality for professional practitioners. 129

133 Mixing is not always mixing. Thorough blending of the various materials commonly mixed today prevents construction damage and costly consequential charges. That is why several basic rules must be observed. 9 Viscous and heavy materials overstrains drills. Use specially constructed mixing machines, with optimised speeds and power transmission. When selecting the mixer observe the direction of flow: Pulverized material from bottom to top, thin liquid materials from top to bottom or mix with parallel direction of flow. At immersion a reduced speed prevents spraying. FLEX mixing machines with accelerator trigger switches permit the gradual acceleration to the required speed. Air pockets are minimised by the complete immersion of the mixing head. For your safety you should wear protective goggles and possibly a dust mask. Never mix solvents with a flashpoint below 21 C. Observe the processing and safety instructions of the material or machine manufacturers. The R 600 VV is especially suited for larger mixtures because of its powerful construction. 130

134 Mixers The important thing in mixing is the technology Optimal handling Low weight, upright body stance, and natural arm position makes mixing child's play. Stable deposit and safety hoop Safe protection from dirt and damage. Accelerator trigger switch and FR electronics With stepless speed regulation for a controlled acceleration to the optimal mixing speed. Sustained power in all speed ranges. Special motors Robust, sustained power, and perfectly cooled because the life of a mixer is especially rough. Ergonomic handle Fits to the anatomy of various types of operator hands. With anti-slip coating in the grip area. Robust 1-gear and 2-gear transmissions For every mixture mass the proper mixing speed for non-spraying working and lump-free blending results suited to the material. M 14 mixing head mount For a quick and easy change of the mixing heads. Quality mixing heads Made of high-quality materials and powder-coated so that valuable mixture masses are not contaminated for example by rust particles. Circumferential protection ring prevents damage to the mixing container

135 Mixing machines R 500 FR R 502 FR watt single-speed mixer with speed control 1010 watt 2-speed mixer with 2 mixing heads FR full-wave electronic control: with soft start, temperature monitoring, overload protection and continuous speed control trigger - for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges Large, rugged single-speed gear unit with optimum ratio for high torque Ergonomic handles on the drive unit: low weight, fatigue-free arm posture and upright body posture allow comfortable, ergonomic operation. With anti-slip coating Stable safety and deposit hoop: Protects the machine from dirt and damage Perfect for mixing smaller, low-viscosity compound, up to approx. 35 kg FR full-wave electronic control: with soft start, temperature monitoring, overload protection and continuous speed control trigger - for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges Large, rugged 2-speed gear unit with optimum ratios for powerful torque and right speed for different materials Ergonomic handles on the drive unit: low weight, fatigue-free arm posture and upright body posture allow comfortable, ergonomic operation. With anti-slip coating Stable safety and deposit hoop: Protects the machine from dirt and damage 1st speed: with RS 1 mixer paddle, ideal for mixing low-viscosity materials 2nd speed: with RS 0 mixer paddle with counter-flow effect for mixing highly fluid materials 9 SPECIFICATIONS R 500 FR Speed without load rpm Power input 1010 watt Power output 600 watt Tool fixture M 14 Clamping neck Ø 43 mm Max. mixing head Ø 130 mm 4,10 kg SPECIFICATIONS R 502 FR No load speed 1st gear rpm No load speed 2nd gear rpm Power input 1010 watt Power output 600 watt Tool fixture M 14 Clamping neck Ø 43 mm Max. mixing head Ø 130 mm 4,20 kg STANDARD EQUIPMENT 1 mixing head RS 1, 120 Ø adapter M 14 x M 14, SW STANDARD EQUIPMENT 1 mixing head RS 1, 120 Ø mixing head RS 0, 120 Ø adapter M 14 x M 14, SW

136 Mixing machines R 600 VV R 1800 VR watt mixer with speed selection 1800 watt mixer with speed selection VV electronic control: with constant speed control, soft start with continuous speed control trigger, overload protection and speed selector wheel1300 watt double positive mixer Mixing head adapter: M 18 Stable safety and deposit hoop: Protects the machine from dirt and damage Long side handgrip for fatigue-free torque take-up Spade handle with integrated switch for maximum operator convenience Ideal for mixing paint, stiff adhesives, solvents and insulation compounds in continuous use Rugged and long-life for heavy-duty use VR electronic control: with tachogenerator constant speed control, soft start with continuous speed control trigger, overload protection, and speed selection Spade handle with long side handgrip for easy handling and to absorb the torque Stable safety and deposit hoop: Protects the machine from dirt and damage Extremely powerful, rugged power tool Ideal for mixing very stiff compounds and large quantities Rugged metal composite housing for optimum heat dissipation SPECIFICATIONS R 600 VV Speed without load rpm Power input 1300 watt Power output 850 watt Tool fixture M 18 Clamping neck Ø 63 mm Max. mixing head Ø 160 mm 5,40 kg SPECIFICATIONS R 1800 VR Speed without load rpm Power input 1800 watt Power output 1100 watt Tool fixture M 18 Clamping neck Ø 63 mm 6,10 kg 9 STANDARD EQUIPMENT 1 handle (long) mixing head RS 3, 160 Ø adapter M 18 x M open-ended wrench SW STANDARD EQUIPMENT 1 handle (long) mixing head RS 3, 160 Ø adapter M 18 x M open-ended wrench SW

137 Mixing machines Accessories mixers RZ 600 VV Mixing head for R 502 FR Mixing head RS 0 For low-viscosity material, such as paint, light plaster, resin, etc. Ideally suited for materials in which a flow is created. Parallel mixing principle: paddle mixer with counter-flow mixing action. Low construction for minimum air pockets. Equipment: - Shaft with M 14 x 2.0 external thread - Solid welded steel design with limit nut mm overall length. Mixing head Mixture in kg 120 Ø watt double positive mixer Mixing head for R 500 FR and R 502 FR Mixing head RS 1 VV electronic control: with constant speed control, soft start with continuous speed control trigger, overload protection and speed selector wheel1300 watt double positive mixer Mixing head adapter: 2 x 16 mm Ø with keyway Protection frame Spade handle with integrated switch for maximum operator convenience Ideal for mixing stiff adhesives, insulation materials, multi-component resins, varnishes and paints in continuous heavy-duty use For highly-viscous material, such as adhesive and injection casting material, mortar, lime, cement, screed, grouting compound, liquid insulating and thermal insulating material, quartz-filled epoxy resin, shoulder bonding material, paste and granulates. Mixing principle from bottom to top: three mixer blades ensure that work progresses rapidly. Maximum mixing effect, thanks to high shear force. Effortless application and easily controlled. Equipment: - Shaft with M 14 x 2.0 external thread - Sturdy, welded steel construction with limit nut mm overall length. Mixing head Mixture in kg 120 Ø SPECIFICATIONS RZ 600 VV Speed without load rpm Power input 1300 watt Power output 850 watt Tool fixture 2 x 16 mm Ø Clamping neck Ø 63 mm Max. mixing head Ø 130 mm 6,30 kg STANDARD EQUIPMENT 1 handle (long) Mixing head I and II Mixing heads for R 600 VV and R 1800 VR Mixing head RS 2 For liquid, low viscosity material, such as paint, masonry and emulsion paints, two-component paint, varnish, lead primer, bitumen, insulation material, cement slurry, etc. Mixing principle from top to bottom: forces the material from the surface downwards with two meshing mixer blades - preventing splashing. Equipment: - Shaft with M 14 x 2.0 external thread - Solid welded steel design with limit nut mm overall length. 9 Mixing head Mixture in kg 110 Ø Ø

138 Accessories mixers Mixing head RS 3 M 14 to M 14 adapter Mixing head RS 4 For highly-viscous material, such as adhesive and injection casting material, mortar, lime, cement, screed, grouting compound, liquid insulating and thermal insulating material, quartz-filled epoxy resin, shoulder bonding material, paste and granulates. Mixing principle from bottom to top: the three mixer blades ensure that work progresses rapidly. Maximum mixing effect, thanks to high shear force. Effortless application and ease of motion. Equipment: - Shaft with M 14 x 2.0 external thread - Solid welded steel design with limit nut mm overall length. Mixing head Mixture in kg 130 Ø Ø For tough, adhesive, highly-viscous material, such as tile adhesive, thin-bed mortar, ready-mixed mortar, screed, plaster, grouting, etc. Mixing principle from bottom to top: the mixing head is drawn downwards. This prevents air pockets developing. Two helixes with low shearing force for effortless mixing. Equipment: - Shaft with M 14 x 2.0 external thread - Solid welded steel design with limit nut mm overall length. Mixing head Mixture in kg 130 Ø Ø For connecting FLEX mixing head fixtures to FLEX mixing machines R 500 FR and R 502 FR. All FLEX mixing head fixtures can be combined with any commercially available drive machine with M 14 thread by using this adapter. Mixing heads for the RZ 600 VV positive mixer Mixing head I and II, galvanized version Ideal for tough mixtures, adhesive, dual and multi-component resins and plastics, varnish and paint, sealing and insulation material, coating material, ready-mixed mortar, plaster, concrete adhesive, etc. Counter-active mixing: Both mixing heads mesh and blend the mixture with particular intensity. Equipment: - Supplied in pairs, adapted for the FLEX positive mixer. For insertion in the positive mixer guides mm overall length Please note: the mixing head with marking ring is inserted in fixture I, the mixing head with two marking rings in fixture II. Mixing head Mixture in kg 130 Ø Mixing head RS 5 For liquid, fibrous material, such as emulsion, paint, plaster, cement slurry, gypsum lime mortar and thermal resistant plaster. Even mixes fine, creamy plaster without forming lumps. Mixing principle from top to bottom: forces the material from the surface downwards with three meshing mixer blades, preventing splashing. Equipment: - Shaft with M 14 x 2.0 external thread - Solid welded steel design with limit nut mm overall length. Mixing head Mixture in kg 160 Ø Mixing with the FLEX L 1202 angle mixer Mixing paddle, M 14 For larger quantities. Used with an extension piece. 120 Ø Accessories for R 500 FR, R 502 FR, R 600 VV and R 1800 VR mixers M 18 to M 14 adapter For attaching FLEX mixing paddles to FLEX R 600 and R 600 VV mixers. This adapter allows all FLEX mixing paddles to be attached to any commercially available mixing machine with an M 18 thread Mixing head, M 14 For smaller quantities. Used with an extension piece. 70 Ø Extension piece, M 14 for mixing paddle + mixing head Extension piece, M14 (can be extended as required)

139 136

140 Core drill technology The sensitive power packages

141 Anchor drilling exactly at right angles. Light weight, play-free guiding, vacuum fixation: best prerequisites for precise work. Where drilling with low noise, no dust, and reduced vibration is required, that is where FLEX core drill technology goes to work. Without any percussive machining, a concrete core is scoured out with absolute precision - and even reinforcing bars pose no problem. Ideal for drilling and breakthrough work in sensitive areas, such as hospitals, laboratories, computer facilities, office buildings and schools, etc. BED 55: Picks up water even on stairs. With our range of dry and wet core drills and the complementary accessory range, we provide you with the tools for effective, low-vibration and economical working. 10 Centring star for pinpoint accuracy. To ensure the optimum positioning of the centring bar in each drill bit, the FLEX accessory programme includes the matching centring star. 138

142 Core drill technology The major advantages of the Quick-Snap system at a glance. Core bits No special core bits are required. All core bits with a standard M16 shank can be used. (Special core bits are needed when dust extraction is used.) Keyless chuck The Quick-Snap core bit holder, which serves as a connecting element, allows fast, keyless change of core bits. Exclusive flexibility Only the FLEX Quick-Snap system with the removable extractor ring allows the possibility of working with and without dust extraction, with the same basic socket. Extremely lightweight Despite the high utility and ruggedness of this system, the extractor rotor is impressively low in weight. The innovative extraction system in conjunction with the FLEX S 47 M reduces the production of health-harmful drilling dust to a minimum Diamond drill bits with extraction M16 shaft drill bits are used with the Quick-Snap system. Quick-Snap drill bit socket. This connecting element allows drill bits to be exchanged without the use of a chuck key. Suction rotor Quick-Snap Comprising a removable extraction ring and the basic holder. For extracting health-harmful dusts and increasing tool life. Extraction adapter The rotating adapter is used with the extractor ring for connection to the FLEX S 47 M and S 47 M industrial vacuum cleaners when drilling

143 Core drilling machines BH 612 Vr BH 812 VV speed core drill for dry drilling core drill for dry drilling VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection Long additional handle: turns and latches in pre-set positions to absorb high torque in freehand operation Safety slip clutch: offers protection if the core drill is jammed Clamping neck: 53 mm, suitable for application in drilling stands Mechanical 2-speed gear unit and variable, electric speed setting provide optimum speeds for a wide range of drilling diameters Ideal for dry drilling VV electronic control: constant speed control, soft start with continuous speed control trigger, overload protection, temperature monitoring and speed selection Long additional handle: turns and latches in pre-set positions to absorb high torque in freehand operation Safety slip clutch: offers protection if the core drill is jammed Clamping neck: 53 mm, suitable for application in drilling stands Ideal for dry drilling Mechanical 2-speed gear unit and variable, electric speed setting provide optimum speeds for a wide range of drilling diameters SpecificationS Power input Power output Machine connection Speed under load 1st/2nd gear Max. drilling Ø masonry BH 612 Vr 1500 watt 1000 watt ⅝"-16 un / rpm 120 mm 4,10 kg SpecificationS BH 812 VV Power input 1800 watt Power output 1200 watt Speed under load 1st/2nd gear / rpm Tool fixture ⅝"-16 un / m 16 Max. drilling Ø masonry 180 mm 4,20 kg 10 Standard equipment 1 handle open-ended wrench SW drill depth stop clamp fitting with ratchet clip plastic carry case Standard equipment 1 handle open-ended wrench SW open-ended wrench SW wrench case drill depth stop clamp fitting with ratchet clip adapter ⅝"-16UN/M plastic carry case

144 Core drilling machines BHi 822 Vr BHW 812 VV core drilling machine for dry drilling with switchable soft hit mode core drilling machine for wet drilling VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection Long additional handle: turns and latches in pre-set positions to absorb high torque in freehand operation Safety slip clutch: offers protection if the core drill is jammed Clamping neck: 53 mm, suitable for application in drilling stands Ideal for hammer-free flush fitting of junction boxes, pattresses and flue connections, etc. in masonry Switchable soft hit mode for working in concrete without water supply VV electronic control: constant speed control, soft start with continuous speed control trigger, overload protection, temperature monitoring and speed selection Long additional handle: turns and latches in pre-set positions to absorb high torque in freehand operation Safety slip clutch: offers protection if the core drill is jammed Clamping neck: 53 mm, suitable for application in drilling stands Quick-action, brass coupling: for ½" water hoses Integrated water feed through the drive shaft Suitable for hammer-free drilling of concrete, flush fitting of junction boxes flue connections and pattresses and cutting breakthroughs Also ideal for precise drilling holes to fix heavy-duty anchors SpecificationS BHi 822 Vr Power input 1800 watt Power output 1200 watt Tool fixture ⅝"-16 un / m 16 Speed under load 1st/2nd gear / rpm Max. drilling Ø in masonry 180 mm Max. drill hole Ø in concrete 82 mm 5,10 kg SpecificationS BHW 812 VV Power input 1800 watt Power output 1200 watt Speed under load 1st/2nd gear / rpm Tool fixture G ½" Clamping neck Ø 53 mm Max. drill hole Ø in concrete 85 mm Max. drilling Ø masonry 185 mm 4,70 kg Standard equipment 1 handle adapter ⅝"-16UN/M open-ended wrench SW open-ended wrench SW wrench case drill depth stop clamp fitting with ratchet clip plastic carry case Standard equipment 1 handle open-ended wrench SW open-ended wrench SW wrench case drill depth stop clamp fitting with ratchet clip and centering aid GFCI operator protection circuit breaker in cord plastic carry case

145 Blind hole drills BHW 1549 Vr Bed Blind hole drill with integrated water feed anchor drilling unit with integrated water feed VR electronic control: with tachogenerator constant speed control, overload protection, and speed selector wheel Quick-action, brass coupling: for ½" water hoses Integral water feed through the drive shaft ensures optimum cooling of diamond bits For hand operation or for use on our BD 6 and BD 18 drill stands Can also be used with FLEX pressurized water tanks VR electronic control: with tachogenerator constant speed control, overload protection, and speed selector wheel Suction cup and vacuum: for fixing to smooth surfaces Precise drill centring by accurate positioning with cross-hair registration marks Quick-action, brass coupling: for ½" water hoses Adapter for vacuum extraction Ideal for hard, fragile materials, including porcelain stoneware tiles, concrete, stone and masonry When using FLEX industrial vacuums to extract drilling sludge, an additional vacuum is created to allow vacuum fastening of the drill stand Integrated water feed through the drive shaft SpecificationS BHW 1549 Vr Power input 1200 watt Power output 700 watt Speed under load rpm Speed without load rpm Tool fixture m 14 Diamond drill Ø 5-10 mm 3,30 kg SpecificationS Bed 18 Power input 1200 watt Power output 700 watt Speed without load rpm Tool fixture m 14 Diamond drill Ø 6-14 mm 4,10 kg 10 Standard equipment 1 bail handle open-ended wrench SW splash guard GFCI operator protection circuit breaker in cord metal carrying case Standard equipment 1 suction cup bail handle stationary drill stand with column guide Vacuum hose connection sharpening stone 1 piece 1 GFCI operator protection circuit breaker in cord metal carrying case

146 Core drilling units Bed Bed core drilling unit with integrated water feed core drilling unit for drilling edges in facing slabs VR electronic control: with tachogenerator constant speed control, overload protection, and speed selector wheel Stationary drill stand: with precision column guide, drill stroke up to 3 mm Water collector with suction cup: for collecting water, even on stairs Safety slip clutch: offers protection if the core drill is jammed Quick-action, brass coupling: for ½" water hoses Sturdy drill stand with side support and long spindle travel The spindle drive unit swings, making corners and recesses on parapets, gravestones and in baths accessible Integrated water feed through the drive shaft VR electronic control: with tachogenerator constant speed control, overload protection, and speed selector wheel Clamping device: for slab thickness from 2 to 5 mm, with 2 adjustable stops (6/6 cm) Integrated water feed through the drive shaft Drilling unit works torsion-free and at an exact right angle Quick-action, brass coupling: for ½" water hoses SpecificationS Bed 55 Power input 1200 watt Power output 700 watt Speed under load 1st/2nd/3rd gear / / rpm Tool fixture G ½" Diamond drill bit Ø mm Surface area occupied by stand 420 x 120 mm (complete unit) 17,2 kg SpecificationS Bed 69 Power input 1200 watt Power output 700 watt Speed without load rpm Tool fixture m 14 Diamond drill bit Ø 5-14 mm (complete unit) 15,5 kg Standard equipment Water collection up to 5 mm Ø GFCI operator protection circuit breaker in cord Stationary drill stand BD Standard equipment 1 GFCI operator protection circuit breaker in cord Stationary drill stand BD

147 Core drilling units Bed Bed mobile core drilling unit with anchor or vacuum attachment 3-speed core drilling unit with anchor or vacuum attachment Mechanical 3-speed gear unit: with optimum speed steps for a wide range of hole diameters Safety clutch: offers protection if the core drill is jammed Bubble level: for accurate unit alignment Drill centering indicator: with drill center indicator Effective drill bit length: max. 45 mm Quick-release core bit ring: 1 ¼" UNC Slanted drilling: up to 45 Hand crank: attaches to both sides Mounting for water collection ring: for drill Ø up to 13 mm Direct cooling of the core bits by a central water feed Quick-action, brass coupling: for ½" water hoses Drill stand base can be secured by anchors or vacuum Mechanical 3-speed gear unit: with optimum speed steps for a wide range of hole diameters Overload protection: for a long service life Electrical surge protection: for a soft start without power overloading Safety clutch: offers protection if the core drill is jammed Bubble level: for accurate unit alignment Drill centering indicator: with drill center indicator Effective drill bit length: max. 7 mm Drill bit connection: 1 ¼" UNC (external) Quick-release core bit ring: 1 ¼" UNC Slanted drilling: up to 45 Combined anchor and vacuum base Quick-clamping fixture: for speedy fitting of the detachable drive motor Hand crank: attaches to both sides Integrated water feed through the drive shaft Quick-action, brass coupling: for ½" water hoses SpecificationS Bed 163 Power input 2000 watt Power output 1400 watt Speed under load 1st/2nd/3rd gear 450 / 1080 / 2100 rpm Tool fixture G ½" (internal), 1 ¼" unc (external) Diamond drill bit Ø 1st/2nd/3rd gear / / mm Surface area occupied by stand 430 x 200 mm (complete unit) 18,0 kg (machine) 8,8 kg SpecificationS Bed 303 Power input 3000 watt Power output 2100 watt Speed under load 1st/2nd/3rd gear 250 / 500 / 1000 rpm Tool fixture 1 ¼" unc (external) Diamond drill bit Ø 1st/2nd/3rd gear / / mm Surface area occupied by stand 300 x 650 mm (complete unit) 36,0 kg (machine) 12,5 kg 10 Standard equipment 1 open-ended wrench SW open-ended wrench SW GFCI operator protection circuit breaker in cord Standard equipment 1 open-ended wrench SW GFCI operator protection circuit breaker in cord

148 Core drilling units BSW 2123 c BSW 3023 c watt core drill for mm Ø 3000 watt core drill for mm Ø Mechanical 3-speed gear unit: with optimum speed steps for a wide range of hole diameters Overload protection: for a long service life Electrical surge protection: for a soft start without power overloading Safety clutch: offers protection if the core drill is jammed Seals: can be replaced quickly from the outside Quick-release core bit ring: 1 ¼" UNC Integrated water feed through the drive shaft Quick-action, brass coupling: for ½" water hoses Combined shaft allows the use of all core bits Mechanical 3-speed gear unit: with optimum speed steps for a wide range of hole diameters Overload protection: for a long service life Electrical surge protection: for a soft start without power overloading Safety clutch: offers protection if the core drill is jammed Integrated water feed through the drive shaft Quick-action, brass coupling: for ½" water hoses Quick-release core bit ring: 1 ¼" UNC SpecificationS BSW 2123 c SpecificationS BSW 3023 c Power input 2000 watt Power input 3000 watt Power output 1400 watt Power output 2100 watt Speed under load 1st/2nd/3rd gear 450 / 1080 / 2100 rpm Speed under load 1st/2nd/3rd gear 250 / 500 / 1000 rpm Tool fixture G ½" / 1 ¼" unc Tool fixture 1 ¼" unc (external) Diamond drill bit Ø 1st/2nd/3rd gear / / mm Diamond drill bit Ø 1st/2nd/3rd gear / / mm 8,80 kg 12,50 kg Standard equipment 1 open-ended wrench SW GFCI operator protection circuit breaker in cord Standard equipment 1 open-ended wrench SW GFCI operator protection circuit breaker in cord

149 Vacuum pump, water pressure tank Vp Wd Vacuum pump for Bed 163 and Bed 303 pressurized water tank Carrying handle: for easy transportation Filter and trap: dirt and dust is not sucked up Safety valve: pressure monitoring gauge, non-return valve, safety tank Pump volume 5 m³/h Ideal for vacuum fastening of the drill stand in place of anchors (conversion set required) Working pressure 6 bar Ideal for mobile applications Fits all machines with a quick-fit coupling for a ½" water hose SpecificationS Vp 5 Power input 350 watt Pumping capacity 83 l/min Capacity 8l 12,00 kg SpecificationS Wd 10 Capacity 10 l 4,50 kg Standard equipment 2,5 m vacuum hose Standard equipment 4 m pressure hose

150 Accessories core drill technology diameter qp order BH 612 Vr/BH 812 VV BHi 822 Vr BHW 812 VV BHW 1549 Vr Bed 18 Bed 55 Bed 69 Bed 163 Bed 303 accessories for BH 612 Vr, BH 812 VV and BHi 822 Vr diamond drill bit with dust extraction, universal Dry, M 16 internal thread, for masonry, with dust extractor for quick-snap system, useful length 8 mm. 68 Ø Ø diamond drill bit with dust extraction, abrasive Dry, M 16 internal thread, for masonry, with dust extractor for quick-snap system, useful length 8 mm. 68 Ø Ø diamond drill bit with dust extraction, specially soldered Dry, M 16 internal thread, for dense sand-lime bricks, with dust extractor for quick-snap system, useful length 8 mm. 68 Ø Ø diamond drill bits with dust extractor for quick-snap Dry, M 16 inner thread, for masonry, with dust extraction for Quick-Snap system, effective length 4 mm. 68 Ø Ø Ø Suction rotor quick-snap Extracts health-hazardous dusts and thereby increases the drill bit's service life. Connection for standard drill bits M 16, by tool-free drill bit exchange. Light rotor with excellent suction power; dry drilling is also possible with the same system without extraction. Quick and simple cleaning by tool-free removal of the suction unit. Connection dimensions ⅝" UN 16. Consisting of: Rotor and 1 drill adapter drill adapter quick-snap For screwing onto the drill bits / drill bits for socket outlets. Connection: M

151 Accessories core drill technology diameter qp order BH 612 Vr/BH 812 VV BHi 822 Vr BHW 812 VV BHW 1549 Vr Bed 18 Bed 55 Bed 69 Bed 163 Bed 303 accessories for BH 612 Vr, BH 812 VV and BHi 822 Vr centering mount quick-snap Diamond drill bit for socket outlets, magnetic with drill centering bar quick-snap For diamond drill bits, effective length 4 mm, magnetic with drill. Without centering star centering star quick-snap For centering bar 34.2, fits drill bit Ø 68 mm. 68 Ø For centering bar 34.2, fits drill bit Ø 12 mm. 102 Ø For centering bar 34.2, fits drill bit Ø 152 mm. 152 Ø Suction adapter for quick-snap Adapter 32/36 mm, can be rotated, tapered, hard. To connect the 32 mm hose with the suction rotor adapter Adapter ⅝"-16 UN to M 16 for connecting the machine directly to the drill bit

152 Accessories core drill technology dimensions qp order BH 612 Vr/BH 812 VV BHi 822 Vr BHW 812 VV BHW 1549 Vr Bed 18 Bed 55 Bed 69 Bed 163 Bed 303 additional accessories Sharpening stone for diamond tools 320 x 160 x plastic multi-carrying case Perfect fitting, impact resistant carrying case, universally adaptable for many different FLEX- Maschines Suction hose Vacuum hose, consisting of: 1 vacuum hose (255.55) and 1 vacuum hose connection (255.57) Vacuum hose Vacuum hose connection centering aid with clamp fitting For drill bits with an effective length of 18 mm extension for centering aid For drill bits with an effective length of 4 mm fastening set The fixing set for Core drilling units - for demanding building site applications - includes 1 fixing bolt: ; 1 wing nut washer: and 25 drive in anchors:

153 Accessories core drill technology diameter qp order BHW 812 VV Bed 55 Bed 163 Bed 303 BHW 1549 Vr Bed 18 Bed 69 Wet core drill bits for the BHW 812 VV, Bed 55, Bed 163 and Bed 303 diamond drill bits for marble and granite Wet, G ½", external thread, effective length 1 mm, continuous segments for mm Ø, divided segments for mm Ø. 12 Ø Ø Ø Ø Ø Ø Ø diamond core drill bits for concrete Wet, G ½", external thread, effective length 3 mm. 42 Ø Ø Ø Wet, G ½", external thread, effective length 4 mm. 40 Ø Wet, 1 ¼" UNC, internal thread, effective length 4 mm. 62 Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Wet, 1 ¼" UNC, inside thread, effective length 45 mm. 300 Ø

154 Accessories core drill technology diameter t L qp order BHW 812 VV Bed 55 Bed 163 Bed 303 BHW 1549 Vr Bed 18 Bed 69 Wet core drill bits for the BHW 812 VV, Bed 55, Bed 163 and Bed 303 diamond core drill bits for junction boxes in concrete Wet, G ½", external thread, effective length 7 mm. 68 Ø Ø Wet drills for the BHW 1549 Vr, Bed 18 and Bed 69 diamond blind hole drill bit M 14, wet, for natural stone. 5 Ø Ø Ø Ø Hollow diamond drill bit M 14, wet, for natural stone and fine stoneware tiles. 6 Ø Ø Ø Ø Ø

155 152

156 Measuring technology We love precision. The introduction of these intelligent helpers has finally rendered spirit levels, plumb lines, and complicated construction aids obsolete. Luminously intense diodes and the high projection precision of the FLEXLasers as well as auxiliary devices such as receivers make laser points or laser lines well visible even under poor light conditions and at greater distances

157 Measuring technology Laser technology has revolutionised measuring and levelling in the construction industry. The tightly bundled laser beam is emitted absolutely straight and makes precise transfer of heights, angles in space, and verticals possible. In building drywall construction and interior work, rotation lasers for example have now become indispensable. The emittance of their 360 beams can be conveniently remotely controlled in some applications. Even complicated measuring tasks can be easily done by one person. Aids are not needed any more. Whether drywall constructors, tile layers, electricians, plumbers, kitchen installers, exhibition stand constructors, carpenters, painters, brick layers, and so forth FLEX has the appropriate precision device for every professional craftsman, for every measuring application, and for every construction site: From the handy laser water level and the self-levelling line laser to the fully automatic rotation laser. 11 Even on curved walls, a cutting check is quickly made with the help of the rotating beam. Automatic rotation laser ALR 512. Hanging of ceilings becomes a breeze thanks to the rotation laser, remote control, and optimal wall/ceiling mount. Crossline laser in bathrooms. For exact levelling of mirror tiles and for sanitary installations true to dimensions. 154

158 Measuring technology With one horizontal and two switchable vertical laser lines projected in the whole room, allowing for quick levelling and exact assembly. Multi-line laser for the highest demands. A permanent visible laser line with a 180 wide angle projection simulates the layout of the room. Self-levelling multi-line laser ALC 514 Application examples - Horizontal and vertical measuring/ levelling - Align wall frames, walls, windows, doors, mirror tiles, etc. - Determine heights of power outlets and light switches - Determine top edge of screed - Layout rows of tiles and floor panels - Transfer heights and points for mounting bus bars, recessed ceiling lamps, etc. - Align advertising signs - Determine slants and angles - Project lines to align for example posters, pictures, and paintings - Lowering ceilings Safety information: FLEXLaser measuring devices meet all international safety standards. They comply with laser class 2 or 2M according to DIN EN : (wave length nm, < 1mW output) and are safe for eyes and skin under normal use. Nevertheless one should never look directly into the laser beam when using laser measuring devices

159 Laser measuring technology adm adm 1 replaces all measuring tapes on the building site Quick determination of dimensions on all construction sites Simple operation Length, area and volume calculation Determining heights with indirect distance measurement Memory and unit-conversion function Automatic stop Illuminated display SpeCifiCationS adm 1 Precision ± 2,5 mm Operation duration 5000 measurements Visible laser diodes nm Max. working range 0,3-45 m Temperature range 0-40 C Laser class 2r 0,25 kg Measurement units m, mm, feet, inch Smallest display value 0,001 mm Standard equipment Batteries 1,5 V (AA) Case with belt loop 2 x 1 piece 11 15

160 Laser measuring technology alp alc new Self-levelling 3-point laser Self-levelling cross-hair laser Right angle, plumbing and zenith point function Optical and acoustical warning signal when self-levelling range is exceeded Optical warning signal for discharged batteries ¼" thread for camera tripod Magnetic holder Three visible, individually switchable laser lines Cross-laser projection Vertical line 90 to cross laser Self-levelling with robust magnetic damping Optical and acoustical warning signal when self-levelling range is exceeded Transportation lock Ideal for interior finishing: suspended ceilings, aligning metal studs in drywall construction, fitting doors and windows, transferring heights, levelling tiles, flush fittings, etc. SpeCifiCationS alp 3 Precision ± 2 mm/10 m Self-levelling range ±5 Operation duration 8h Visible laser diodes 3 x 625 nm Max. working range 50 m Laser class 2 Temperature range C 0,60 kg SpeCifiCationS alc 311 Precision ± 3 mm/10 m Self-levelling range ± 3,5 Operation duration 15 h Visible laser diodes 3 x 635 nm Max. working range 20 m Laser class 2m 0,70 kg Standard equipment Batteries 1,5 V (AA) 3 x Magnetic target panel Padded carrying bag 1 piece Standard equipment Wall and tripod console 1 piece Magnetic target panel Laser goggles Batteries 1,5 V (AA) for measuring device 3 pieces Padded carrying bag 1 piece 11 15

161 Laser measuring technology alc Self-levelling multi-line laser for visual room layout Three visible single laser lines with 180 wide angle beams individually on/off switchable Cross-laser projection On/Off switchable perpendicular point function Pulsating beam for use with receiver Self-levelling with robust magnetic damping Optical and acoustical warning signal when self-levelling range is exceeded Transportation lock with universal floor tripod Dust- and splash-proof Ideal for high-standard levelling and measurement projects, e.g. in civil engineering, interior finishing and outdoors SpeCifiCationS alc 514 Precision ± 3 mm/10 m Self-levelling range ± 3 Operation duration with battery drive 12 h Visible laser diodes 5 x 635 / 1 x 650 nm Max. working range 20 m Max. range with receiver 50 m Laser class 2m/2 1,60 kg Standard equipment Magnetic target panel Mains adapter V 1 piece Laser goggles Battery pack 3. V 2 pieces Padded carry case 1 piece

162 Laser measuring technology alr the self-levelling rotating laser for vertical and horizontal use Full automatic horizontal and vertical self-levelling Switchable automatic to manual leveling function in combination with grade mount, obtainable as accessory (order no ) Switchable TILT alarm function: safety modus against unintentional disturbance of the unit Two step rotation or target point only Incremental manuell angle adjustment up to max ± 5 horizontal and vertical Permanent perpendicular beam Re-chargable and normal battery operation Remote control Automatic switch-off and acoustical signal when limits are exceeded, can be switched off Dust- and splash-proof Universal use inside and outside SpeCifiCationS alr 512 Precision ± 1 mm/10 m Self-levelling range ± 5 Operation duration with battery drive 14 h Visible laser diodes 635 nm Max. range with receiver 300 m Range rotating (without receiver) ca. 30 m Range point / scan function (without receiver) ca. 50 m / ca. 30 m Rotation speed 500 / 200 rpm Laser class 2 1,70 kg Standard equipment Magnetic target panel Wall and floor mount 1 piece Conus for wall and floor use 1 piece V battery pack Mains adapter V 1 piece Battery container 1 piece Receiver with dual-display 1 piece Batteries 1,5 V (AA) 2 pieces bracket 1 piece Remote control, incl. 1 battery 9 V 1 piece Padded carry case 1 piece

163 Laser measuring technology elevating tripod, medium elevating tripod, large elevating tripod, medium elevating tripod, large Lockable elevator post with mm scale With opening to bottom for plumb line projection to floor Extending legs with quick-lock action Rubber-coated foot points Lockable elevator post with mm scale Extending legs with quick-lock action Rubber-coated foot points SpeCifiCationS Working range Adjustability of elevator post elevating tripod, medium 0,65-2 m 0,39 m 5,10 kg SpeCifiCationS Working range Adjustability of elevator post elevating tripod, large 0,9-2,85 m 0,4 m 9,10 kg Standard equipment Adapter plate 1 piece Standard equipment Adapter plate 1 piece 11 10

164 Accessories laser measuring technology accessories for laser measuring technology receiver rc 2 Clamping post For ALC 514. Hand-Receiver to locate the laser beam when it cannot be seen with the human eye. With bracket, as well as optical and acustic signal. Wall and ceiling mount The five-segment clamping post is clamped between floor and ceiling (max. height 3,4 m). With a holder that is steplessly adjustable in height for attaching laser measuring devices with ⅝" threads, for FLEX Laser ALC 311, ALC 514, ALC 512, ALR 411 M and ALP 305. tool fixture qp order G ⅝" Stable mount for attaching rotation and line lasers to ceiling profiles or to the wall. With ⅝" thread, e.g. for FLEX Laser ALC 311, ALR 411 M, ALR 511 A, ALR 512 and ALP 305. Equipped with a height fine tuning. Grade mount Laser goggles qp order For ALR 512. To set the rotation laser in infinite gradings when operating on manual setting. qp order magnetic target panel tool fixture qp order G ⅝" Improves the visibility of the red laser beam especially at greater distances. qp order Boosts the projection of the laser beam over long distances or in bright surroundings. qp order

165 FLEX-safety features and warranty For your safety. FLEX machines meet all legal trade and professional association safety regulations. FLEX stands for practical solutions and professional quality down to the last detail. Should there be any faults on a machine, the FLEX manufacturer warranty will take care of it, quickly and unbureaucratically. Electrical safety of operation Faulty tools pose a hazard to the user when precautions are not taken seriously in high voltage areas, to prevent electric shock. FLEX electrical power tools are insulated according to the safety classes I and II from EN Electrical safety devices A) Machines with water supply The safety of FLEX devices with water supply is guaranteed as follows: a) Isolating transformer Devices that are equipped with a plug (position of the earth pin: 12h) acc. to IEC are delivered in safety class II and can be operated only in combination with a isolating transformer according to EN b) Residual current operated device (GFCI) Devices with a GFCI in the power supply line (trip circuit 10 ma) are supplied with increased insulation and protective earth conductor (earth connection of the metal parts that can be touched from outside). B) Transportable motor driven electrical power tools acc. EN Residual current operated device (GFCI) Devices with a GFCI in the power supply line (trip circuit 30 ma) are supplied with increased insulation and protective earth conductor (earth connection of the metal parts that can be touched from outside). Warranty When purchasing a new machine FLEX provides a 2-year manufacturer warranty, beginning on the day of the sale of the machine to the end customer. The warranty covers only damages that can be traced back to material and/or manufacturing faults as well as the noncompliance of promised features. In case of assertion of claims from this warranty the original sales receipt that shows the purchase date has to be submitted. Warranty repairs may be made only by shops or service stations authorised by FLEX. An assertion of claims exists only when used appropriately. Excluded from this warranty are in particular regular operational wear, improper use, partially or completely disassembled power tools, as well as damage due to overload of the machine, the use of non-permitted, defective, or improperly applied tools. Damages caused by the machine on the application tool or workpiece, use of force, consequential damages, that can be traced to improper or insufficient maintenance by the customer or third parties, damaging due to external influence such as sand or stones as well as damages due to nonobservance of the instructions such as connection to wrong voltages or type of electricity. Radio interference suppression FLEX electrical power tools are shielded according to EN and EN according to EU directive 89/336/ EEC. Technical modifications and illustrations. Our FLEX electrical power tools are always brought to the current state of the art. We therefore reserve the right to change technical specifications. Illustrations are also non-binding. 162

166 FLEX Electronics Greater performance, longer service life. More power, gradual acceleration of the speed that is easy on the motor, speeds kept in the optimal range, and safe protection from overload. Those are, briefly summarised, the typical characteristics of FLEX electronics. A further advantage on machines with greater Wattage is the starting-current limitation. It briefly reduces the high starting current and thus prevents the tripping of the fuse in the mains. The tachometer generator is also a technology with many great features. It constantly monitors the speed of the armature. If it deviates from the nominal value, the current is regulated appropriately. It goes full throttle for example if there is an extra load until the set speed has been reached again. If the motor is unduly loaded, the drawing of current is automatically reduced to a healthy level. In highly loaded motors a temperature monitoring with PTC resistance is fitted. It protects the windings from overheating and overloading. FLEX electronics so things runs smoothly. The electronics is, so to say, used for tuning a machine. With FLEX electronics the motor output can be increased significantly if necessary. Microprocessor electronics FLEX Electronics Speed selection Regulation Control system Starting-current limitation* Temperature monitoring with PTC resistance Protection from overload FE FR VE VR FV VV FR VR none depends on current full wave yes no current monitoring none depends on speed full wave yes on especially loaded machines current monitoring stepless (adjustment wheel) none half wave no no none stepless (adjustment wheel) depends on speed full wave yes on especially loaded machines current monitoring none depends on current full wave yes yes current and temperature monitoring stepless (accelerator trigger switch and adjustment wheel) depends on current full wave yes yes current and temperature monitoring none depends on speed full wave yes L 3410 FR L 3410 FRG current, partially temperature monitoring stepless (adjustment wheel) depends on speed full wave yes L 3410 VR L 3403/6 VRG XC 3401 VRG current, partially temperature monitoring Other advantages Frequency power increase *on machines with high power consumption power increase tachometer generator none power increase tachometer generator power increase accelerator trigger switch power increase power increase restart protec - tion after power interruption tachometer generator power increase restart protection after power interruption partially accelerator trigger switch tachometer generator 50 Hz 50/60 Hz 50 Hz 50/60 Hz 50 Hz 50 Hz 50/60 Hz 50/60 Hz 163

167 Information How to find us. FLEX-Elektrowerkzeuge GmbH Bahnhofstrasse Steinheim, Germany Tel.: + 49(0) Fax: + 49(0) FLEX Customer service On-line around the clock for you. Our customer service can be reached by phone Monday through Friday and any day via the Internet. For all questions about FLEX quality electrical power tools, accessories, and spare parts, but also for quick referral to the nearest FLEX dealer in your area. Customer service: Tel.: + 49 (0) Fax: + 49 (0) info@flex-tools.com Should you wish to give us your opinion, make suggestions on improving FLEX machines, or tell us how we can expand our program please send us an IhreMeinung@flex-tools.com FLEX Service centre The experts for quick action and good advice. In case your FLEX requires service - no problem: You send your machine with a brief fault description to our local service centre, we will carry out the service and send your FLEX back to you as fast as possible. And should you have any questions on the technology or the accessories, just give us a call. FLEX retailers Where professional technology and competent consultation meet. No question: advance technology is accompanied by knowledgeable specialist consulting. That is why FLEX quality electrical power tools are available exclusively from qualified dealers. And qualified means in this case: Whoever is a FLEX dealer has been trained on FLEX and has competent answers for the trickiest questions. 164