Τιμοκατάλογος Απριλίου 2018

Transcription

1 Τιμοκατάλογος Απριλίου 2018 Όλες οι τιμές είναι σε ευρώ ( ), χωρίς Φ.Π.Α. και μεταφορικά έξοδα Ο τιμοκατάλογος αφορά σε προϊόντα με προδιαγραφές (230 V / 50Hz) Ο πλήρης κατάλογος προϊόντων της Outback Power βρίσκεται στην παρακάτω διεύθυνση ( ) Ο τιμοκατάλογος είναι πιθανόν να τροποποιηθεί χωρίς προειδοποίηση Effective Επίσημος αντιπρόσωπος Υψηλάντου 81, Κερατσίνι Τηλ.: Fax: info@electrotech.gr web: Grid Interactive - Off Grid Inverter/Charger RADIAN Series True sine wave inverter/charger, capable of off-grid or grid-connected operation in a single model. Dual AC inputs (grid and generator) provide flexibility with no external switching required. Stacking capability for large scale systems (up to 70kVA in single phase and 210kVA in three phase systems). Built-in network communications / Field upgradeable firmware. Simplified commissioning with the use of powerful easy to use configuration wizard. Energy management provides a precise balance between using stored energy, solar and grid power. Features: Grid-interactive and stand-alone in the same package Dual AC Inputs (Grid / Generator) Field serviceable modular design Field adjustable input/output voltage / frequency settings High continuous output Wattage Easy -to-use configuration wizard Code DC Input Cont. Pow AC AC Input Output Max AC Max AC O/P AC Overload DC Voltage Charger Voltage Rating Volts/Freq Voltage Regulation Input Amps Peak/RMS Surge/5s/30m I/P Range O/P Amps ΤΙΜΗ GS3548E kVA 230V/50Hz V ±2% 50A 50A/35.3A 8.2/5.8/4.0kVA 40-64VDC 100A 1.97 GS7048E kVA 230V/50Hz V ±2% 50A 100A/70.7A 16.3/11.5/7.9kVA 40-64VDC 50A ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 1

2 RADIAN GS Series Load Center (GSLC) RADIAN Load Center The GSLC is a balance-of-systems enclosure designed to seamlessly integrate with the Radian Series inverter/chargers, FLEXmax charge controllers, and OutBack HUB communications manager. Three pre-wired available models allow quick and easy installation of power systems of any size Indoor rated (IP30) and can also be used on its own as a separate breaker enclosure for use with other inverter models. GSLC GS Load Center for Radian Series. 48 GSLC Prewired GSLC with two 175A inverter disconnects, 230VAC inverter bypass and dual AC inputs 752 GSLC175-PV- 230 Prewired GSLC with two 175A inverter disconnects, GFDI and PV disconnects for two charge controllers, FLEXnet DC w/ 3 shunts, 230VAC inverter bypass and dual AC inputs GSLC175PV1-230 Prewired GSLC with one 175A inverter disconnects, GFDI and PV disconnects for one charge controller, FLEXnet DC w/ 2 shunts, 230VAC inverter bypass and dual AC inputs 956 GS-IOB-230VAC GS Bypass Kit Single Phase 230VAC 125 GS-SBUS DC Shunt Bus for GS Load Center FXR/VFXR Series Inverter/Charger FXR Series True sine wave inverter/charger, capable of off-grid or grid-connected operation in a single model. Incorporates DC to AC Sine wave Inverter, Intelligent multi stage charger and AC transfer relay into a single unit. Suitable for home, small business and harsh environments. Provides the ability to sell power back to the utility supplier. 2.0 kva and 2.3 kva sealed models (FXRxxxE) / 2.6 kva and 3.0 kva vented models (VFXRxxxE) Built-in network communications allow for simultaneous communications of up to ten Outback Power components. Multiple units can be stacked in series and parallel (up to 30 kva in a 3 phase grid tied 24V or 48V system). Features: Grid-Tie, Backup or Standalone operation. Pure sine wave output. Field serviceable Intelligent battery charger with genset support. High surge and charger ratings Sealed chassis for harsh environments and vented types for higher output. Code DC Input Cont. Pow AC AC Input Output Max AC Max AC O/P AC Overload DC Voltage Charger Voltage Rating Volts/Freq Voltage Regulation Input Amps Peak / RMS Surge/5s/30m I/P Range O/P Amps ΤΙΜΗ FXR2012E kVA 230V/50Hz V ±2.5% 30A 28A / 20A 4.6/4.3/2.5kVA VDC 100A 1.33 FXR2024E kVA 230V/50Hz V ±2.5% 30A 35A / 25A 5.8/5.2/3.1kVA 21-34VDC 55A 1.33 FXR2348E kVA 230V/50Hz V ±2.5% 30A 35A / 25A 5.8/5.2/3.1kVA 42-68VDC 35A 1.33 VFXR2612E kVA 230V/50Hz V ±2.5% 30A 28A / 20A 4.6/4.3/3.1kVA VDC 120A VFXR3024E kVA 230V/50Hz V ±2.5% 30A 35A / 25A 5.8/5.2/3.3kVA 21-34VDC 80A VFXR3048E kVA 230V/50Hz V ±2.5% 30A 35A / 25A 5.8/5.2/3.3kVA 42-68VDC 40A GFX Inverter/Charger GFX Series True sine wave inverter/charger designed for application with lower power demands. Incorporates DC to AC Sine wave Inverter, Intelligent multi stage charger and AC transfer relay into a single unit. Suitable for home, small business and harsh environments. Built-in network communications allow for simultaneous communications of up to ten Outback Power components. Features: Grid-Tie, Backup or Standalone operation. Pure sine wave output. Field serviceable Intelligent battery charger with genset support. High surge and charger ratings Sealed chassis for harsh environments. Code DC Input Cont. Pow AC AC Input Output Max AC Max AC O/P AC Overload DC Voltage Charger Voltage Rating Volts/Freq Voltage Regulation Input Amps Peak / RMS Surge/5s/30m I/P Range O/P Amps ΤΙΜΗ GFX1312E kVA 230V/50Hz V ±2% 30A 28A / 20A 4.6/2.9/1.8kVA VDC 70A 1.17 GFX1424E kVA 230V/50Hz V ±2% 30A 28A / 20A 4.6/2.9/2.0kVA 21-34VDC 40A 1.17 GFX1448E kVA 230V/50Hz V ±2% 30A 28A / 20A 4.6/2.9/2.0kVA 42-68VDC 20A 1.17 Inverter FX Mobile/Marine FX M Series True sine wave inverter/charger designed for application with lower power demands. Incorporates DC to AC Sine wave Inverter, Intelligent multi stage charger and AC transfer relay into a single unit. OutBack's M-Series Mobile/Marine inverter/charger models provide high performance and reliability wherever your travels take you. The required AC input neutral/ground switching is taken care of by a fully-integrated 30AAC transfer switch for shore power or generator hook-up. Built-in network communications allow for simultaneous communications of up to ten Outback Power components. Features: Backup or Standalone operation. Pure sine wave output. Field serviceable. RTS included Intelligent battery charger with genset support. High surge and charger ratings Sealed chassis for harsh environments. Code DC Input Cont. Pow AC AC Input Output Max AC Max AC O/P AC Overload DC Voltage Charger Voltage Rating Volts/Freq Voltage Regulation Input Amps Peak / RMS Surge/5s/30m I/P Range O/P Amps ΤΙΜΗ FX2012EMT kVA 230V/50Hz V ±2.0% 30A 28A / 20A 4.6/4.3/2.5kVA 42-68VDC 100A 1.31 FX2024EMT kVA 230V/50Hz V ±2.0% 30A 35A / 25A 5.8/5.2/3.1kVA 21-34VDC 55A 1.31 FX2348EMT kVA 230V/50Hz V ±2.0% 30A 35A / 25A 5.8/5.2/3.1kVA VDC 35A 1.31 VFX2612EM kVA 230V/50Hz V ±2.0% 30A 28A / 20A 4.6/4.3/3.1kVA 42-68VDC 120A 1.31 VFX3024EM kVA 230V/50Hz V ±2.0% 30A 35A / 25A 5.8/5.2/3.3kVA 21-34VDC 85A 1.31 VFX3048EM kVA 230V/50Hz V ±2.0% 30A 35A / 25A 5.8/5.2/3.3kVA VDC 45A 1.31 ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 2

3 FLEXmax Series MPPT Charge Controllers (FM) The software algorithm is continuous and active increasing FM Vdc photovoltaic array yield by up to 30% compared to non MPPT Maximum Power Point Tracking (MPPT) controller. Updated MPPT software algorithm improves energy harvest vs other controllers Voltage step down capability, down convert from any acceptable 100A output for up to 5kW of charging array voltage to any battery voltage Compatible with 24, 36 and 48VDC battery banks Charge Modes: Bulk, Absorption, Float, Silent, Equalization Integrated ground fault protection Features:- System configures quickly with smart programming wizards (MATE3s required)extinguishes Series Arcs Fully OutBack network integrated and programmable Programmable auxiliary control output Built-in 128 days data logging Outdoor-rated enclosure IP54 FM80-150Vdc Programmable auxiliary control output NEW! Code Nominal DC Output Voltage Max. Outpu Suggested Solar STC Power PV Open Conversion (field programmable) Current Circuit Voltage efficiency ΤΙΜΗ FM60-150Vdc 12, 24, 36, 48, 60V 60A 12VDC/750W 48VDC/3000W 24DC/1500W 60VDC/3750W 150 Vdc 98.1% 422 FM80-150Vdc 12, 24, 36, 48, 60V 80A 12VDC/1000W 48VDC/4000W 24DC/2000W 60VDC/5000W 150 Vdc 97.5% 461 FM Vdc 36, 48, 24V 100A 36VDC/4500W 48VDC/6000W 24DC/3000W NEW! 300Vdc 98,80% FLEXmax Micro Series MPPT Charge Controllers FLEXmax Micro Series 30A and 40A sizes for 12V/24V applications Maximum Power Point Tracking (MPPT) technology Features:- Four-stage, temperature compensated battery charging for optimized battery life Unique, die-cast aluminum chassis designed to provide natural, passive dissipation, increasing operating efficiency Operating temperature range from -35 to 55 o C Voltage thresholds field programmable IP30 rating RS485 / RJ45 Interface Load control: manual/light/light+timer/time MATE Micro Code DC Input Rated Bat Rated load max. PV Open Max. PV Controller Type Voltage Current Current Circuit Voltage Input power ΤΙΜΗ FM30-150Vdc 12V/24V 30A 20A 150V 390W (12V) 780W (24V) MPPT 171 FM40-150Vdc 12V/24V 40A 20A 150V 520W (12V) 1040W (24V) MPPT 206 MATE Micro Remote meter displays system operating information, error indications, and self-diagnostics 34 RTS Micro Remote temperature sensor for FM30/FM40 5 FM Micro CommCable USB to RS-485 converter is used to monitor a FLEXmax Micro Series controller using the OB Micro Series PC software, and for firmware updates 5 OutBack network/system Management The HUB system communication manager is the backbone of the networked Outback power conversion system. The HUB communicates Stacking, Load Share, Global charging, and Power On-Off signals Interconnection cabling between the units is standard Ethernet CAT5 with RJ45 plug. The HUB4/HUB10 establishes communication between FXR or RADIAN inverter charger, FM MPPT controllers, FlexNet DC monitoring, and either MATE3 or AXS PORT The MATE3s provides local programming, monitoring, and enhanced control functions and interfaces to OPTICSre The AXS PORT provides Modbus connectivity and interfaces to OPTICSre The FlexNet DC monitors up to 3 DC shunts and provides 1 programmable auxiliary output Connectivity to the web based remote monitor and control program requires a MATE3 or an AXS PORT ( see: ) HUB4 4 Port HUB system communication manager 85 HUB Port HUB system communication manager 125 MATE3s Advanced System Display and Controller with Ethernet port, provides connectivity to MATE3 OPTICSre HUB OutBack Modbus/TCP Interface Device for remote system communication and control using Modbus AXS PORT over Ethernet, provides connectivity to OPTICSre 17 FN-DC FlexNet DC system monitoring unit Amp 50mV DC current shunt with terminal bus bar for mounting on top of a FX Series FW-SHUNT250 Inverter/Charger. Includes bus bar for connection to inverter s DC negative terminal AXS-PORT 52 FW-SHUNT Amp 50mV DC current shunt with attached terminal bus bar and one white insulator 45 OBCATV-3 3 (1 meter) 300 volt rated OutBack communications cable with RJ45 connectors FlexNet DC 4 MATE3s OBCATV-6 6 (2 meter) 300 volt rated OutBack communications cable with RJ45 connectors 5 OBCATV (3 meter) 300 volt rated OutBack communications cable with RJ45 connectors 7 OBTFB-300 Class T Fuse Block, 300 Amp 70 OBTFB-400 Class T Fuse Block, 400 Amp FW-SHUNT ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 3

4 FLEXpower Integrated Systems Factory tested, pre-wired and pre-configured systems Fast installation - just hang on the wall with the brackets (included) and make connections. Off-grid and grid-tied functionality in one flexible system Powerful system in a compact space-saving format Field upgradeable software Ample AC and DC breaker provisions GridZero technology effectively lets users "zero out" the utility grid if enough renewables are present, reducing or even eliminating grid dependence Advanced Battery Charging (ABS) supports a wide range of battery technologies including lithium-ion Code Components of pre-wired system FLEXpower ONE FXR/VFXR ΤΙΜΗ FP1 VFXR3024E FP1 VFXR3048E FP2 VFXR3024E FLEXpower ONE 3.0kVA - 24Vdc solution, single VFXR3024E, pre-wired AC and DC boxes with 230Vac Bypass, 250A DC breaker, GFDI, 80Amp charge controller breaker, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC and surge protector plus one FLEXmax 80 MPPT charge controller FLEXpower ONE 3.0kVA - 48Vdc solution, single VFXR3048E, pre-wired AC and DC boxes with 230Vac Bypass, 175A DC breaker, GFDI, 80Amp charge controller breaker, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC and surge protector plus one FLEXmax 80 MPPT charge controller FLEXpower TWO 6.0kVA - 24Vdc solution, dual VFXR3024E, pre-wired AC and DC boxes with 230Vac Bypass, 250ADC breakers, PNL-GFDI-80D and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, and surge protectors plus two FLEXmax 80 MPPT charge controllers FLEXpower TWO FXR/VFXR FP2 VFXR3048E FP3 FXR2024E FP3 VFXR3024E FP3 VFXR3048E FLEXpower TWO 6.0kVA - 48Vdc solution, dual VFXR3048E, pre-wired AC and DC boxes with 230Vac Bypass, 175ADC breakers, PNL-GFDI-80D and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, and surge protectors plus two FLEXmax 80 MPPT charge controllers FLEXpower THREE 6.0kVA - 24Vdc, triple FXR2024E pre-wired AC and DC boxes with AC Bypass, 250A DC breakers, PNL-GFDI-80Q and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, surge protectors plus three FLEXmax 80 MPPT charge controllers FLEXpower THREE 9.0kVA - 24Vdc, triple VFXR3024E, pre-wired AC and DC boxes with AC Bypass, 250A DC breakers, PNL-GFDI-80Q and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, surge protectors plus three FLEXmax 80 MPPT charge controllers FLEXpower THREE 9.0kVA - 48Vdc solution, triple VFXR3048E, pre-wired AC and DC boxes with AC Bypass, 175A DC breakers, PNL-GFDI-80Q and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, surge protectors plus three FLEXmax 80 MPPT charge controllers FLEXpower THREE FXR/VFXR FLEXpower FOUR FP4 FXR2348E FP4 VFXR3048E FLEXpower FOUR 9.2kVA - 48Vdc solution, quad FXR2348E, pre-wired AC and DC boxes with AC Bypass, 175A DC breakers, PNL-GFDI-80Q and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, surge protectors plus four FLEXmax 80 MPPT charge controllers FLEXpower FOUR 12kVA - 48Vdc solution, quad VFXR3048E, pre-wired AC and DC boxes with AC Bypass, 175A DC breakers, PNL-GFDI-80Q and 80 Amp charge controller breakers, HUB 10.3, MATE3s and brackets, RTS, FLEXnet DC, surge protectors plus four FLEXmax 80 MPPT charge controllers ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 4

5 Intigrated Combiner Solutions The OutBack Power FLEXware ICS combiner boxes are cost-effective integrated solutions for solar installations requiring basic combining and overcurrent protection needs. Powder-coated aluminum enclosure protects against environmental exposure Easy-to-install fuses offer bi-directional overcurrent protection Pre-configured and integrated design reduces installation time in the field FWPV6 Combiner box integrated with cable gland and touch-safe distribution blocks. Accommodates up to six 600Vdc rated fuses holders. Includes one ground bus bar. (Fuses and 11 FWPV4-FH600 Combiner box pre-wired with four 600Vdc fuse holders, cable gland and touch-safe distribution blocks. Includes one ground bus bar. (Fuses sold separately.) 145 FWPV6-FH600 Combiner box pre-wired with six 600Vdc fuse holders, cable glands and touch-safe distribution blocks. Includes one ground bus bar. (Fuses sold separately.) 164 CABLEGLAND-5 Cable Gland, 1" EKO, 5 Hole Accommodates up to eight 150Vdc rated breakers or up to six 600Vdc rated fuse holders. Includes one insulated negative TBB, one ground bus and one combiner bus bar FWPV-8 with dual 2/0 AWG output lug terminals. (Breakers, fuse holders and fuses sold separately). 116 Accommodates up to twelve 150Vdc rated breakers or up to eight 600Vdc rated fuse holders. Includes two insulated negative TBB, one ground bus and two combiner bus FWPV-12 bar each with dual 2/0 AWG output lug terminals. (Breakers, fuse holders and fuses sold separately). 15 OBF-6-600Vdc Fuse 6 Amp 600Vdc 12 OBF Vdc Fuse 10 Amp 600Vdc 1 OBF Vdc Fuse 15 Amp 600Vdc FUSE Vdc/10 Carton of (10) x 15 Amp, 600Vdc Fuses 36 FUSE Vdc/10 Carton of (10) x 20 Amp, 600Vdc Fuses 36 OBFH Vdc-DIN Fuse holder 30 Amp maximum 600Vdc DIN Mount 22 FH Vdc- DIN Fuse holder 30 Amp maximum 1000Vdc DIN Mount 7 Brackets FW-CCB Mounting Bracket for one side mounted charge controller on GSLC, FW500 and FW1000 DC enclosures. Includes mounting screws 24 FW-CCB2 Mounting bracket for two side mounted charge controllers on GSLC, FW500 and FW1000 DC enclosures. Includes mounting screws and flexible conduit 51 FW-CCB2-T Mounting bracket for two top mounted charge controllers on FW500 and FW1000 DC enclosures. Includes mounting screws FW-MB3 FW-MB3-F FW-MB1 46 FW-MB3 MATE3 Mounting Bracket for side mounted display on Radian, GSLC, FW500 and FW1000 DC enclosures. Includes mounting screws and bushings 20 FW-MB3-F Flat-mount MATE3 Mounting Plate for installation over standard electrical boxes. Includes mounting screws 16 FW-MB3-S Surface-mount MATE3 Mounting Bracket - with mounting screws 16 ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 5

6 Integration Products FW250 FW500-AC FW500-DC FW1000-AC FW1000-DC FW-MP FW-ACA DCA Conduit adapter allows connection of the FXR/VFXR Series inverter/chargers to FLEXware 500 and FLEXware 1000 enclosures, one FW-ACA and DCA required per FX Series inverter/charger. DC and/or AC breaker enclosure secures directly to either end of an FX Series Inverter/Charger. Includes ground bus bar and DC breaker handle guard. Holds up to eight FW250 1 to 80 Amp, one 175 or 250 Amp panel mount breaker and a GFCI AC outlet (not included). Does not use the DCA or FW-ACA for connection to an FX Series Inverter/Charger. (DC current shunt not included) 106 FW500-AC FW500-DC FW1000-AC FW1000-DC FW-MP AC breaker enclosure fits at the AC side of one or two FX Series Inverter/Chargers. Includes ground bus bar and DIN mounting bracket for up to sixteen DIN type breakers (not included) and a GFCI AC outlet (not included). Requires optional FW-ACAs for connection of each FX Series Inverter/Charger DC breaker enclosure fits at the DC side of one or two FX Series Inverter/Chargers. Includes ground bus bar, 500 Amp DC shunt assembly with negative TBB breaker mounting screws holds up to eight 1 to 80 Amp, three 100 or 125 Amp and two 175 or 250 Amp panel mount breakers (not included). Requires optional DCAs for connection of each FX Series Inverter/Charger AC breaker enclosure fits at the AC side of up to four FX Series Inverter/Chargers. Includes ground bus bar and two DIN mounting brackets for up to thirty-two DIN type breakers (not included) and two GFCI AC outlets (not included). Requires optional FW-ACAs for connection of each FX Series Inverter/Charger. DC breaker enclosure fits at the DC side of up to four FX Series Inverter/Chargers. Includes ground bus bar, 1000 Amp DC shunt assembly with negative TBB breaker mounting screws holds up to eleven 1 to 80 Amp, nine 100 or 125 Amp and six 175 or 250 Amp panel mount breakers (not included). Requires optional DCAs for connection of each FX Series Inverter/Charger. Mounting Plate for FW500 or FW1000 system. Includes enclosure and inverter mounting screws. FW500 requires one mounting plate, FW1000 requires two mounting plates. FW-ACA AC conduit adapter for all FXR Series Inverter/Chargers to AC enclosure 34 DCA DC conduit adapter for all FXR Series Inverter/Chargers to DC enclosure Bypass FW-IOBS- Single inverter Input-Output-Bypass for FW250 only - 230Vac output 30 Amp 6.9kW. Includes three 30A 230Vac single 230VAC pole PANEL mount breakers. 7 Bypass Kits include: FW-IOBD- Dual inverter Input-Output-Bypass for FW Vac output 60 Amp 13.8kW. Includes six 30A 230Vac single pole DIN - AC Breaker 230VAC mount breakers. - AC Breaker Bypass Slide Plane 197 FW-IOBT- Triple inverter Input-Output-Bypass for FW /400Vac output 30 Amp 20.7kW. Includes nine 30A 230Vac single - Terminal Bus Bar Isolators 230/400VAC pole DIN mount breakers. - Conductors 303 FW-IOBQ- 230VAC Quad inverter Input-Output-Bypass for FW Vac output 120 Amp 27.6kW. Includes twelve 30A 230Vac single pole DIN mount breakers. - Breaker Label Kit - Hardware Kit 34 Surge Protector Advanced design allows for both AC and DC protection on multiple circuits (two AC and one DC) via thermally fused Metal Oxide Varistors (MOVs). LED visual indicators provide at-a glance status monitoring allowing system users to determine FLEXware Surge Protector operational status in real-time. The FLEXware Surge Protector is designed to operate between 120 to 240VAC at 50/60Hz and 12 to 48VDC. The FW-SP-ACA mounts inside the FW-ACA for FLEXware 500 and 1000 systems, while the FW-SP-250 is designed to mount inside the FLEXware 250 AC Side Breaker Enclosure. FW-SP-250 FLEXware 250 Compatible FLEXware Surge Protector 131 FW-SP-ACA FW-ACA with FLEXware Surge Protector for FLEXware 500 and FLEXware FW-SP-R Replacement FLEXware Surge Protector 9 ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 6

7 DIN DC Breaker DIN-1-DC 1 Amp 125Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-2-DC 2 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-3-DC 3 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-4-DC 4 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-5-DC 5 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-6-DC 6 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-8-DC 8 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-9-DC 9 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-10-DC 10 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-15-DC 15 Amp 150Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-20-DC 20 Amp 125Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-30-DC 30 Amp 125Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-50-DC 50 Amp 125Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN-60-DC 60 Amp 125Vdc Single Pole DIN Mount, 0.5 (13 mm) wide DIN AC Breaker DIN-15-AC 15 Amp 120Vac 50/60Hz single pole 0.50 (13 mm) wide. Branch Circuit Rated 10k AIC DIN-15D-AC 15 Amp 120/240Vac 50/60Hz dual pole 1.0 (26 mm) wide. Branch Circuit Rated 10k AIC DIN-20-AC 20 Amp 120Vac 50/60Hz single pole 0.50 (13 mm) wide. Branch Circuit Rated 10k AIC DIN-20D-AC 20 Amp 120/240Vac 50/60Hz dual pole 1.0 (26 mm) wide. Branch Circuit Rated 10k AIC DIN-25D-AC 25 Amp 120/240Vac 50/60Hz dual pole 1.0 (26 mm) wide. Branch Circuit Rated 10k AIC DIN-10-AC Amp 277Vac 50/60Hz single pole 0.5 (13 mm) wide DIN-15-AC Amp 277Vac 50/60HZ Single Pole 0.5" (13 mm) wide DIN-30-AC Amp 277Vac 50/60Hz Single Pole 0.5" (13 mm) wide DIN-30D-AC Amp 277/480Vac 50/60Hz Dual Pole 1.0" (26 mm) wide DIN-30T-AC Amp 277/480Vac 50/60Hz Three Pole 1.5" (39 mm) wide 4 DIN-50-AC Amp 277Vac 50/60Hz Single Pole 0.5" (13 mm) wide DIN-50D-AC Amp 277/480Vac 50/60Hz Dual Pole 1.0" (26 mm) wide DIN-50T-AC Amp 277/480Vac 50/60Hz Three Pole 1.5" (39 mm) wide 4 DIN-60-AC Amp 277Vac 50/60Hz Single Pole 0.5" (13mm) wide DIN-60D-AC Amp 277/480Vac 50/60Hz Dual Pole 1.0" (26mm) wide ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 7

8 Panel Mount Breaker AC/DC PNL-1-AC/DC 1 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-5-AC/DC 5 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-10-AC/DC 10 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-15-AC/DC 15 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-20-AC/DC 20 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-30-AC/DC 30 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-30-AC 30 Amp, 250Vac, 1/4 stud terminals PNL-40-AC/DC 40 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-50-AC A 250VAC single pole panel mount breaker with 1/4" stud terminals. PNL-50-AC/DC 50 Amp, 150Vdc and 120Vac, 1/4 stud terminals PNL-60-AC/DC 60 Amp, 150Vdc and 120Vac, 1/4 stud terminals Panel Mount Breaker DC PNL-80-DC 80 Amp, 150Vdc, 1/4 stud terminals PNL-100-DC 100 Amp, 125Vdc, 5/16 stud terminals 31 PNL-125-DC 125 Amp, 125Vdc, 5/16 stud terminals 26 PNL-175-DC 175 Amp, 125Vdc, 3/8 stud terminals 72 PNL-250-DC 250 Amp, 125Vdc, 3/8 stud terminals 72 Ground Fault Detection and Interruption DC PNL-GFDI-80 PV Ground-Fault Detector Interrupter 80 Amp 150Vdc single pole panel mount 65 PNL-GFDI-80D PV Ground-Fault Detector Interrupter 80 Amp 150Vdc two pole panel mount 7 PNL-GFDI-80Q PV Ground-Fault Detector Interrupter 80 Amp 150Vdc four pole panel mount 125 Battery Cable FW-CABLE175-15R 175 Amp 2/0 AWG DC Cable 15 Inches (38 cm) long with Ring Terminals on Both Ends. Red heat shrink. 23 FW-CABLE175-36R 175 Amp 2/0 AWG DC Cable 36 Inches (91.5 cm) long with Ring Terminals on Both Ends. Red heat shrink. 34 FW-CABLE175-36W 175 Amp 2/0 AWG DC Cable 36 Inches (91.5 cm) long with Ring Terminals on Both Ends. White heat shrink. 34 FW-CABLE250-15R 250 Amp 4/0 AWG DC Cable 15 Inches (38 cm) long with Ring Terminals on Both Ends. Red heat shrink. 36 FW-CABLE250-36R 250 Amp 4/0 AWG DC Cable 36 Inches (91.5 cm) long with Ring Terminals on Both Ends. Red heat shrink. 55 FW-CABLE250-36W 250 Amp 4/0 AWG DC Cable 36 Inches (91.5 cm) long with Ring Terminals on Both Ends. White heat shrink. 55 Bus Bar DC FW-BBUS Breaker Reversible Bus Combiner allows connection Bus Bar for of up two to A, eight 150Vdc three rated A, breakers four or 1-80A up to six DC 600Vdc breakers rated or three fuse holders 500 Amp with DC dual current 2/0 FW-CBUS-8 AWG Reversible output Combiner lug terminals Bus Bar for up to twelve 150Vdc rated breakers or up to eight 600Vdc rated fuse holders with dual 16 FW-CBUS-12 2/0 AWG output lug terminals 30 FW-SBUS Shunt Bus allows up to four high current cable connections on same side of DC shunt - includes two 3/8 inch bolts and FW-BBUS FW-SBUS FW-CBUS-8 FW-CBUS Relay OBR-16-DIN OutBack 16 Amp Maximum 30Vdc/250Vac Rated Relay and DIN Mount Base with LED 31 ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 8

9 Bus Bar AC/DC long TBB-GROUND Ground/Neutral Terminal Bus Bar with Mounting screws (No Insulators) TBB-WHITE Bus Bar w/white Insulators - Includes Mounting screws TBB-BLACK Bus Bar w/black insulators - Includes Mounting screws TBB-RED Bus Bar w/red Insulators - Includes Mounting screws TBB-BLUE Bus Bar w/blue Insulators - Includes Mounting screws TBB-BROWN Bus Bar w/brown Insulators - Includes Mounting Screws Bus Bar AC/DC short STBB-BLACK Short Bus Bar Kit with Black insulators STBB-WHITE Short Bus Bar Kit with White insulators STBB-RED Short Bus Bar Kit with Red insulators STBB-BLUE Short Bus Bar Kit with Blue insulators STBB-BROWN Short Bus Bar Kit with Brown insulators Accessories DCC DC Wiring cover for FX and VFX Series Inverter/Chargers FW-ACA FW-ACA AC Conduit Adapter for all FX Series Inverter/Chargers to AC enclosure 34 FXTURBOKIT DC Wiring cover with Turbo fan for sealed inverters 84 RTS Remote Temperature Sensor, for use with Inverter/Charger or Charge Controller (Includes 20' (6 m) cable) Extended Warranty Extended Warranty Fee, Radian 10-Year extended warranty for Radian Series Inverter/Chargers 1.07 Extended Warranty Fee, GTFX, GVFX, FXR 10-Year extended warranty for Grid-Interactive FX Series Inverter/Chargers 71 Extended Warranty Fee, FM 10-Year extended warranty for FLEXmax Series Charge Controllers 300 Spare Parts FX-AC FX/VFX AC Board, must specify inverter model when ordering 214 FX-FET FX/VFX FET Board, must specify battery voltage when ordering 214 FX-CNTRL FX/VFX Control Board, must specify inverter model when ordering 214 FX/GS FAN KIT FX and GS Replacement Fan 2 SPARE-001 FM80 Fan Replacement Kit 22 SPARE-002 FM60 Fan Replacement Kit SPARE-035 Charge Controller Replacement Button Board 55 SPARE-036 Charge Controller Replacement Power Board 277 SPARE-037 FM60-150Vdc Replacement Control Board 75 SPARE-038 FM80-150Vdc Replacement Control Board 75 SPARE-102 FXR Control Board for FXR 12V(E Models) 192 SPARE-104 FXR Control Board for FXR 24V(E Models) 192 SPARE-106 FXR Control Board for FXR 48V(E Models) 192 SPARE-108 FXR 230V AC Board 192 SPARE-109 FXR 12V FET Board 501 SPARE-110 FXR 24V FET Board 473 SPARE-111 FXR 48V FET Board 48 SPARE-202 GS7048E, GS3548E Board Stack Assembly Replacement 884 SPARE-203 GS7048E, GS3548E Power Module Replacement SPARE-215 GS7048E, GS3548E Power Module Replacement 106 SPARE-300 ICS Distribution Block, 1 Line/4 Load, 175A 1 SPARE-301 ICS Cable Gland, 1.25" EKO, 9 Hole ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος - 9

10 Battery 12V Pure Lead Carbon- Front Terminal NEW! Pure Lead Carbon 12V Front Terminal Battery designed for residential or light-commercial off-grid Backup or self-consumption renewable energy power 3,000 cycles at 50% DOD Pure lead extends the life of the battery versus traditional VRLA and allows for increased float capability for backup applications Advanced carbon technology reduces the effect of sulfation and is compatible with Partial State of Charge (PSoC) operation Fast recharge 90% SoC in 1.5 hours 4 years full replacement warranty NEW! Code Voltage 12V Ampere Hour Capacity Weight Dimensions Operating Temp. Range Cells ΤΙΜΗ H x W x D per unit C12 C24 C100 (cm) Charge Discharge per unit 200PLC 12V 168 Ah 182 Ah 200 Ah 59kg 32.0 x 56 x C to 60 C -40C to 65C 6 48 EnergyCell RE High Capacity Battery Bank The EnergyCell RE High Capacity Battery Bank family offers an ideal solution for large capacity Valve Regulated Lead Acid (VRLA) battery requirements. The battery banks are composed of 2V EnergyCells RE and a modular racking system. The 2V EnergyCell RE features are the same as for 12V EnergyCell RE. Absorbed Glass Mat (AGM) technology for efficient gas recombination of up to 99%, and freedom from electrolyte maintenance Product Highlights: Ideal for Applications Requiring Large Capacity VRLA Batteries Low Maintenance, No Watering required 100% Out-of-Box Initial battery capacity 24V and 48V Options Available in Standard Configurations 1100RE RE-24 24V EnergyCell RE Battery Bank Code EnerSys 24V Ampere Hour Capacity Weight Dimensions Battery-Id C8 C24 C100 Racks Batteries Total System H x W x D (cm x cm x cm) ΤΙΜΗ 1100RE-24 DDm Ah 984 Ah 1150 Ah Kg Kg Kg 88.4 x 94.4 x RE-24 DDm Ah 1176 Ah 1340 Ah Kg Kg Kg 88.4 x 94.4 x RE-24 DDm Ah 1416 Ah 1600 Ah Kg Kg Kg x 84.7 x RE-24 DDm Ah 1776 Ah 2070 Ah Kg Kg Kg x x RE-24 DDm Ah 1872 Ah 2140 Ah Kg Kg Kg 88.4 x x RE-24 DDm Ah 2352 Ah 2770 Ah Kg Kg Kg x x V EnergyCell RE Battery Bank Code EnerSys 48V Ampere Hour Capacity Weight Dimensions Battery-Id C8 C24 C100 Racks Batteries Total System H x W x D (cm x cm x cm) ΤΙΜΗ 1100RE-48 DDm Ah 984 Ah 1150 Ah Kg Kg Kg x 94.4 x RE-48 DDm Ah 1176 Ah 1340 Ah Kg Kg Kg x 94.4 x RE-48 DDm Ah 1416 Ah 1600 Ah Kg Kg Kg x 84.6 x RE-48 DDm Ah 1776 Ah 2070 Ah Kg Kg Kg x x RE-48 DDm Ah 1872 Ah 2140 Ah Kg Kg Kg x x RE-48 DDm Ah 2352 Ah 2770 Ah Kg Kg Kg x x ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος

11 OPzS-2VCell Ah Capacity 2300 cycles 60% 20 C Design Life 20 years Price on request! OPzV-12V-6VBlock OPzV 6V / 12V Block Ah Capacity 2000 cycles 60% 20 C Design Life 15 years Price on request! OPzV RES Battery - 2V RES OPzV is a premium range, developed for applications requiring regular deep cycling. It is a maintenance-free energy storage solution that offers significant benefits in terms of cost per cycle, combined with the highest level of reliability and performance even for remote installations where long discharges occur and excellent recharging properties are essential. Product Highlights: Valve Regulated Tubular Plate GEL Batteries for Renewable Energy Applications Tubular positive plates, GEL form electrolyte, unique sliding pole design and special alloys composition offer a 60% DoD cycle life of up to 2500 cycles for 2V cells Vertical and horizontal installation. Racks designed for optimal space utilization, quick installation and easy battery maintenance. Maintenance-free design without water topping-up needs Unversial Terminal Code Voltage 2V Ampere Hour Capacity Weight Dimensions Operating Temperature Range Poles per Unit C12 C24 C100 H x W x D (cm) Recommended Min/Max per Cell ΤΙΜΗ OPzV-450 2V 347 Ah 388 Ah 452 Ah 28 Kg 38.2 x 20.6 x C to 35 C -20 C to 45 C OPzV-750 2V 588 Ah 662 Ah 782 Ah 42 Kg 49.8 x 20.6 x C to 35 C -20 C to 45 C OPzV V 954 Ah 1077 Ah 1287 Ah 68 Kg 67.3 x 21.0 x C to 35 C -20 C to 45 C OPzV V 1432 Ah 1618 Ah 1988 Ah 97 Kg 67.3 x 21.0 x C to 35 C -20 C to 45 C 4 6 OPzV V 2237 Ah 2503 Ah 2927 Ah 165 Kg 79.9 x 21.4 x C to 35 C -20 C to 45 C OPzV V 3357 Ah 3760 Ah 4402 Ah 240 Kg 79.9 x 21.2 x C to 35 C -20 C to 45 C OPzV-Rack Battery rack optimized for OPzV Battery bank configurations on request Επίσημος αντιπρόσωπος Υψηλάντου 81, Κερατσίνι Τηλ.: Fax: info@electrotech.gr web: ELECTROTECH POWER SYSTEMS - Επίσημος Αντιπρόσωπος