SECTION 3 PLUMBING VALVES
|
|
- Amice Watson
- 5 years ago
- Views:
Transcription
1 SECTION 3 PLUMBING VALVES PRODUCT LINE PAGE Ball Valves NL Brass, Brass, Stainless Steel CPVC Molded -in-place Ball Valves PVC Molded -in-place Ball Valves PVC Single Union Ball Valves PVC True Union Ball Valves Butterfly Valves Butterfly Valve Flanges, Bolt Kits, Gaskets, Installation Kits Cast Iron Butterfly Valves PVC Butterfly Valves Flanges Float Valves, Bronze Gate Valves Plumbing Valves, Low Pressure NL Brass, Brass Celcon, PVC & CPVC Slice Gate Valves Swing Check Valves Wall Hydrants
2
3 Ball Valves - NO LEAD Brass HFBV6-NL Series NO LEAD Forged Brass Full Port Ball Valve Features: Heavy pattern NO LEAD forged brass construction. Full port allows maximum flow & minimum pressure drop or turbulence. PTFE seats, chrome plated NO LEAD brass ball. PTFE stem packing with adjustable gland follower. Blow out proof stem design. 600 PSI W.O.G. non-shock; 150 PSI S.W.P. CSA Certified (TXT only) Third party certified to NSF/ANSI /4-2 Handle nut Zinc Coated Steel Handle Zinc Coated Steel Gland Follower NL Forged Brass Stem Packing PTFE Ball Chrome Plated NL Brass Seats PTFE Body NL Forged Brass End Adapter NL Forged Brass Part Number Ctn/Case List Price Part Number List Price Threaded Size Qty Threaded Sweat Sweat HFBV6-25TNL 1/4 15/120 $ HFBV6-38TNL 3/8 15/ HFBV6-50TNL 1/2 15/ HFBV6-50SNL $ HFBV6-75TNL 3/4 10/ HFBV6-75SNL HFBV6-100TNL 1 8/ HFBV6-100SNL HFBV6-125TNL 1 1/4 4/ HFBV6-125SNL HFBV6-150TNL 1 1/2 2/ HFBF6-150SNL HFBV6-200TNL 2 2/ HFBV6-200SNL HFBV6-250TNL 2 1/2 3/ HFBV6-300TNL 3 2/ HFBV6-400TNL 4 1/ HFBV4-PEXNL Series Handle Nut Zinc Coated Steel Handle Zinc Coated Steel Stem O-ring (2) NBR Ball Chrome Plated NL Brass Seats PTFE Body NL Forged Brass End Adapter NL Forged Brass NO LEAD Forged Brass FULL Port Ball Valve with PEX Connections Features: Heavy pattern, full port, forged NO LEAD brass constuction. PTFE seats, chrome plated NO LEAD brass ball. NBR double o-ring stem seal. Blow-out proof stem design. 400 PSI W.O.G. non-shock; 125 PSI S.W.P. PEX ends for use with PEX tubing connections. Third party certified to NSF/ANSI 372. Ctn/Case Part Number Size Qty List Price HFBV4-50PEXNL 1/2 25/100 $ 6.61 HFBV4-75PEXNL 3/4 10/ HFBV4-100PEXNL 1 10/ /15/18 3.1
4 Ball Valves - NO LEAD Brass HFBV4-PEXSWNL Series Handle Nut ZInc Coated Steel Handle Zinc Coated Steel Stem O-ring (2) NBR Ball NL Brass Seats PTFE Body NL Forged Brass End Adapter NL Forged Brass NO LEAD Forged Brass STANDARD Port Ball Valve with PEX x SWEAT Connections Features: Heavy pattern, standard port, forged NO LEAD brass construction. PTFE seats, chrome plated NO LEAD brass ball. NBR double o-ring stem seal. Blow-out proof stem design. 400 PSI W.O.G. non-shock; 125 PSI S.W.P. PEX x SWEAT ends for use with PEX tubing to copper tubing connections. Third party certified to NSF/ANSI 372. Part Number Size Ctn/Case Qty List Price HFBV4-50PEXSWNL 1/2 25/100 $ 9.27 HFBV4-75PEXSWNL 3/4 10/ HFBV6-INL Series Handle Zinc Plated Steel Handle Nut Zinc Plated Steel Stem Packing PTFE Packing Nut Brass Ball 1/2-1 Lead Free Brass 1 1/4 SS #316 Seats PTFE Body NL Brass End Adapter NL Brass HFBV6-IFTNL Series Handle Zinc Plated Steel Handle Nut Zinc Plated Steel Stem Packing PTFE Packing Nut Brass Ball 3/4-1 Lead Free Brass 1 1/4 SS #316 Seats PTFE Body NL Brass End Adapter NL Brass NO LEAD Forged Brass FULL Port Ball Valve with HOSE BARBS Connection Features: Heavy pattern, full port, forged NO LEAD brass construction. PTFE seats, chrome plated NO LEAD brass ball. PTFE stem packing with adjustable gland follower. Blow-out proof stem design. 600 PSI W.O.G. non-shock; 150 PSI S.W.P. Insert hose barb ends for use with polyethylene pipe connections. Third party certified to NSF/ANSI 372. Part Number Size Ctn/Case Qty List Price HFBV6-50INL 1/2 50/80 $ HFBV6-75INL 3/4 6/ HFBV6-100INL 1 6/ HFBV6-125INL 1 1/4 5/ NO LEAD Forged Brass FULL Port Ball Valve with HOSE BARB x FPT Connection Features: Heavy pattern, full port, forged NO LEAD brass construction. PTFE seats, chrome plated NO LEAD brass ball. PTFE stem packing with adjustable gland follower. Blow-out proof stem design. 600 PSI W.O.G. non-shock; 150 PSI S.W.P. Insert hose barb x FPT ends for use with polyethylene pipe and IPS connections. Third party certified to NSF/ANSI 372. Part Number Size Ctn/Case Qty List Price HFBV6-75IFTNL 3/4 6/60 $ HFBV6-100IFTNL 1 6/ HFBV6-125IFTNL 1 1/4 5/ FALL
5 Ball Valves - Stainless Steel, PEX & Radiant Tubing Stainless Steel Full Port Ball Valve Features: 304 Stainless steel ball valves Full Port, 1000 psi WOG Locking Handle (padlock not included) Investment castings. PTFE seal and packing. Blow-out proof stem. FPT x FPT Third party certified no lead to NSF/ANSI 372. SSBV Series Handle Nut Stainless Steel Handle Stainless Steel Gland Follower Stainless Steel Stem Packing PTFE Packing Nut Stainless Steel Ball Stainless Steel Seats PTFE Body Stainless Steel End Adapter Stainless Steel Seal Gasket PTFE Part Number Description Size T x T Case Qty List Price SSBV25TLH Stainless 1000# 1/4 2/80 $ SSBV38TLH Stainless 1000# 3/8 2/ SSBV50TLH Stainless 1000# 1/2 2/ SSBV75TLH Stainless 1000# 3/4 2/ SSBV100TLH Stainless 1000# 1 2/ SSBV125TLH Stainless 1000# 1 1/4 2/ SSBV150TLH Stainless 1000# 1 1/2 2/ SSBV200TLH Stainless 1000# 2 2/ SSBV250TLH Stainless 1000# 2 1/2 2/ SSBV300TLH Stainless 1000# 3 2/ SSBV400TLH Stainless 1000# 4 2/ NO LEAD Brass Chrome Plated Supply Valve with PEX Connections Features: Chrome Plated No Lead DZR Brass. 1/4 Turn Plastic Oval Handle. For use with PEX tubing connections. Maximum pressure rating: 125 psi Maximum temperature rating: 180 F (82 C) Stem Packing: Double NBR o-ring. Seat Material: PTFE Third party certified to NSF/ANSI 372. LOW LEAD Angle Stop Valve Straight Stop Valves Old Part Inner/Ctn List Part Number Number Size Description Qty Price ANGLE STOP Valve PEX Insert x Compression CPSVA1/2PX1/4CNL NL 1/2 x 1/4 Angle Stop Ch Plated NL 12/144 $ 5.85 CPSVA1/2PX3/8CNL NL 1/2 x 3/8 Angle Stop Ch Plated NL 12/ STRAIGHT STOP Valve PEX Insert x Compression CPSVS1/2PX3/8CNL NL 1/2 x 3/8 Straight Stop Ch Plated NL 12/ /15/18 3.3
6 Ball Valves - LEADED Brass HFBV6 Series Forged LEADED Brass Full Port Ball Valve Features: Heavy pattern forged leaded brass construction. Full port allows maximum flow & minimum pressure drop or turbulence. PTFE seats, chrome plated brass ball. PTFE stem packing with adjustable gland follower. Blow out proof stem design. 600 PSI W.O.G. non-shock; 150 PSI S.W.P. (400 PSI 21/2, 3 4 ) CSA Certified (TxT only), UL Listed. Part Number Ctn/Case List Price Part Number List Price Threaded Size Qty Threaded Sweat Sweat 1/4-2 Handle nut Zinc Coated Steel Handle Zinc Coated Steel Gland Follower Forged Brass Stem Packing PTFE Ball Chrome Plated Brass Seats PTFE Body Forged Brass End Adapter Forged Brass HFBV6-25T 1/4 50/100 $ 8.94 HFBV6-38T 3/8 50/ HFBV6-50T 1/2 50/ HFBV6-50S $ HFBV6-75T 3/4 30/ HFBV6-75S HFBV6-100T 1 20/ HFBV6-100S HFBV6-125T 1-1/4 12/ HFBV6-125S HFBV6-150T 1-1/2 9/ HFBF6-150S HFBV6-200T 2 6/ HFBV6-200S HFBV6-250T 2-1/2 3/ HFBV6-300T 3 2/ HFBV6-400T HFBV6-I Series Handle nut Zinc Coated Steel Handle Zinc Coated Steel Gland Follower Forged Brass Stem Packing PTFE Ball Chrome Plated Brass Seats PTFE Body Forged Brass End Adapter Forged Brass 5/15/ Forged LEADED Brass FULL Port Ball Valve with Hose Barbs Features: Heavy pattern, full port, forged leaded brass constuction. PTFE seats, chrome plated brass ball. PTFE stem packing with adjustable gland follower. Blow-out proof stem design. 600 psi W.O.G. non-shock; 150 psi S.W.P. Insert hose barb ends for use with polyethylene pipe connections. Ctn/Case Part Number Size Qty List Price HFBV6-50I 1/2 50/100 $ HFBV6-75I 3/4 30/ HFBV6-100I 1 20/ HFBV6-125I 1-1/4 12/
7 Ball Valves - Gas HGBVL Series ISO 9001 Handle Screw Steel Handle Aluminum Stem O-Rings NBR Stem Forged Brass Ball Chrome Plated Brass Seats PTFE Body Forged Brass End Adapter Forged Brass Forged Brass Gas Ball Valve Features: Heavy duty two piece forged brass body. For use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures. Meets ANSI standard Z21.15 for use as a gas appliance connector valve (1/2 lb. system). CSA, US/AGA B Pressure rated at 175 psi W.O.G. non-shock. Imported, Mfg for American Granby in an ISO 9001 facility. DIMENSIONS (IN.) BTU SIZE A B C Capacity/Hr. 1/ ,000 3/ , ,200,000 Lever Style Tee Style Size Part Number Part Number t x t Ctn/Case Qty List Price HGBVL50T 1/2 12/144 $ HGBVL75T 3/4 12/ HGBVL100T 1 6/ /15/18 3.5
8 Float Valves - Bronze, NO LEAD Bronze Bronze, NO LEAD Bronze Float Valve Features: Cast bronze or NO LEAD bronze body Buna-N Disc Heavy Duty Tapped for 1/4-20SAE rod Threaded outlet Rated at 125 psi Third party certified to NSF/ANSI 372. Part Number Size Inlet Outlet Tapped Ctn Qty List Price BFVNL1/2 1/2 1/2 mpt 1/2 mpt 1/4-20SAE 10/100 $ BFVNL3/4 3/4 3/4 mpt 3/4 mpt 1/4-20SAE 10/ BFVNL1 1 1 mpt 1 mpt 1/4-20SAE 10/ BFV Series BFVR Series Stainless Steel Rods Features: Stainless Steel SAE Male thread both ends Third party certified to NSF/ANSI 372. Part Number Length Thread Fits Valve Size Ctn Qty List Price BFVR8 8 1/4-20SAE 1/2-1 50/400 $ 6.62 BFVR /4-20SAE 1/2-1 50/ BFVR /4-20SAE 1/2-1 50/ BFVFP Series Plastic Float Features: PVC, Corrosion resistant. Lightweight Up to 175 F For open tank service only Bronze or NO LEAD bronze threaded connection. Third party certified to NSF/ANSI 372. Part Number Float Diam. Buoyancy Female Connection Ctn Qty List Price BFVFPNL lbs. 1/4-20SAE 100 $ BFVFPNL lbs. 1/4-20SAE BFVFPNL lbs. 1/4-20SAE /20/18 3.6
9 Valves - Brass Gate GV200 Series GV200 Series Forged Brass Gate Valve Features: Constructed of heavy duty forged brass. Die-cast body, forged bonnet are connected with a PTFE body to bonnet gasket for a leak proof seat. Screwed bonnet, non-rising stem, solid wedge disc and integral seats. Graphite stem seal packing. Cast iron hand wheel Rated at 200 PSI WOG; 125 PSI SWP (working pressure, non shock) Threaded ends produced to ANSI/ASME B (NPT) standards. Sweat ends produced to ANSI B standards Imported Wheel Nut Stainless Steel Hand Wheel Gray Iron Packing Nut Brass Gland Follower Brass Stem Seal Packing Graphite Bonnet Brass Body-Bonnet Gasket PTFE Lock Nut Brass Stem Brass Disc Brass Body Brass DIMENSIONS (IN.) SIZE A (IPS) A (CxC) B (IPS) B (CxC) C d 1/ / / / / Threaded Sweat Ctn/Case Part Number Part Number Size Qty List Price GV200-50T 1/2 10 / 100 $ GV200-50S 1/2 10 / GV200-75T 3/4 10 / GV200-75S 3/4 10 / GV T 1 5 / GV S 1 5 / GV T 1 1/4 5 / GV S 1 1/4 5 / GV T 1 1/2 2 / GV S 1 1/2 2 / GV T 2 2 / GV S 2 2 / GV T 2 1/2 1 / GV T 3 1 / GV T 4 1 / /14/17 3.7
10 Valves - Swing Check HSCV, HSCV-NL Series Cap Brass Body Brass Disc Brass Hinge Pin Brass Screw Brass Brass and NO LEAD Brass Swing Check Valve Features: Constructed of heavy duty cast brass or NO LEAD Brass Screwed cap, swing type disc and integral seat. Prevents backflow while offering full flow performance with a minimum of turbulence or pressure loss. Rated 200 PSI W.O.G. (working pressure non-shock) NO LEAD Brass swing check valves are third party certified to NSF/ANSI 372. Manufactured for American Granby in an ISO 9001 factory. ISO 9001 DIMENSIONS (IN.) BRASS NO LEAD BRASS SIZE A (TxT) A (CxC) B (TxT) B (CxC) A (TxT) A (CxC) B (TxT) B (CxC) 1/ / / / / NO LEAD Brass Cap No Lead Brass Body No Lead Brass Disc No Lead Brass Hinge Pin No Lead Brass Screw No Lead Brass Brass NL Threaded NL Sweat Ctn/Case Part Number Part Number Size Qty List Price HSCV50TNL 1/2 12/120 $ HSCV50SNL 1/2 12/ HSCV75TNL 3/4 10/ HSCV75SNL 3/4 10/ HSCV100TNL 1 5/ HSCV100SNL 1 5/ HSCV125TNL 1-1/4 5/ HSCV125SNL 1-1/4 5/ HSCV150TNL 1-1/2 5/ HSCV150SNL 1-1/2 5/ HSCV200TNL 2 2/ HSCV200SNL 2 2/ HSCV250TNL 2-1/2 1/ HSCV300TNL 3 1/ HSCV400TNL 4 1/ Threaded Sweat Ctn/Case Part Number Part Number Size Qty List Price HSCV50T 1/2 10/120 $ HSCV50S 1/2 10/ HSCV75T 3/4 10/ HSCV75S 3/4 10/ HSCV100T 1 5/ HSCV100S 1 5/ HSCV125T 1-1/4 5/ HSCV125S 1-1/4 5/ HSCV150T 1-1/2 5/ HSCV150S 1-1/2 5/ HSCV200T 2 2/ HSCV200S 2 2/ HSCV250T 2-1/2 1/ HSCV300T 3 1/ HSCV400T 4 1/ /15/18 3.8
11 Plumbing Valves - NO LEAD Brass, Stainless Steel BOILER DRAINS HOSE BIBBS 125 PSI WOG (working pressure - non-shock), 200 PSI WOG (1/4 turn ball valve hose bibbs) All valves shown are UPC rated and third party certified to NSF/ANSI 372. Imported Part Number Size Description Ctn/Case Qty List Price NO LEAD Brass No-Kink Boiler Drains HNKD50NL 1/2 mip x ght 12/144 $ HNKD75NL 3/4 mip x ght 12/ HNKDNL Series HBD-SBNL Series EIBD-SBNL Series HHBNL Series IHBB NL Series HBDNL Series IBD-SBNL Series IBDBVNL Series HHBNHTNL Series IHBBNHTNL Series NO LEAD Brass Boiler Drains HBD50NL 1/2 mip x ght 12/ HBD75NL 3/4 mip x ght 12/ HBD50SBNL 1/2 w/ stuffing box mip x ght 12/ HBD75SBNL 3/4 w/ stuffing boxmip x ght 12/ NO LEAD Brass Full Flow Boiler Drains - ECONOMY EIBD50SBNL 1/2 w/ stuffing box mip x ght 12/ EIBD75SBNL 3/4 w/ stuffing box mip x ght 12/ NO LEAD Brass Full Flow Boiler Drains IBD50SBNL 1/2 w/ stuffing box mip x ght 12/ IBD75SBNL 3/4 w/ stuffing box mip x ght 12/ NO LEAD 1/4 turn Ball Valve Brass Boiler Drain w/ Butterfly Handle IBDBV50NL 1/2 mip x ght 12/ IBDBV75NL 3/4 mip x ght 12/ NO LEAD Brass Hose Bibbs HHB50NL 1/2 mip x ght 12/ HHB75NL 3/4 mip x ght 12/ NO LEAD Brass Hose Bibbs - No Garden Hose Thread, Sampling Valve HHB50NHTNL 1/2 mip x spout 12/ HHB75NHTNL 3/4 mip x spout 12/ NO LEAD Brass 1/4 turn Ball Valve Hose Bibb w/ T Handle psi WOG non-shock IHBB50NL 1/2 1/4 turn NL mip x ght 12/ IHBB75NL 3/4 1/4 turn NL mip x ght 12/ NO LEAD Brass 1/4 turn Ball Valve Brass Hose Bibbs w/ T Handle psi WOG non-shock - No garden hose thread - Sampling valve IHBB50NHTNL 1/2 1/4 turn NL mip x spout 12/ IHBB75NHTNL 3/4 1/4 turn NL mip x spout 12/ STAINLESS STEEL 1/4 turn Ball Valve Hose Bibbs w/ T Handle psi WOG non-shock (with stainless steel T handle) IHBB50SS 1/2 STAINLESS mip x ght 12/ IHBB75SS 3/4 STAINLESS mip x ght 12/ IHBBSS Series IHBBSSNHT Series Has combination 1/2 mip and 1/2 solder connection 304 STAINLESS STEEL 1/4 turn Ball Valve Hose Bibbs w/ T Handle psi WOG non-shock - No garden hose thread - Sampling valve IHBB50SSNHT 1/2 STAINLESS mip x spout 12/ IHBB75SSNHT 3/4 STAINLESS mip x spout 12/ /15/18 3.9
12 Plumbing Valves - NO LEAD Brass BENT NOSE GARDEN ANGLE SILL COCKS 125 PSI WOG (working pressure - non-shock) Imported Part Number Size Description Ctn/Case Qty List Price NO LEAD Brass Full Flow Bent Nose Garden Valves (CA AB1953 certified) HBNG50NL 1/2 fip x ght 12/72 $ HBNG75NL 3/4 fip x ght 12/ HBNG100NL 1 fip x ght 12/ HBNGNL Series NO LEAD Brass Angle Sill Cocks (CA AB1953 certified) HSC50TNL 1/2 fip x ght 12/ HSC75TNL 3/4 fip x ght 12/ HSCNL Series No Lead Brass Vacuum Breaker Features: HVBAD has automatic back drain and can be manually drained. ASSE 1011 Third party certified to NSF/ANSI 372. HVB75NL Part Number Description Ctn/Case Qty List Price NO LEAD Vacuum Breaker HVB75NL 3/4 NL Brass fght x mght 10/100 $ HVBAD75NL 3/4 NL Brass w/ auto back drain fght x mght 10/ HVBAD75NL 5/15/
13 Plumbing Valves - LEADED Brass, Low Pressure BOILER DRAINS HOSE BIBBS 125 PSI WOG (working pressure - non-shock), 200 PSI WOG (1/4 turn ball valve hose bibbs) All valves shown below are UPC rated except IHBB Series Imported i Reduced price - Limited quantities available. Part Number Size Description Ctn/Case Qty List Price Brass No-Kink Boiler Drains HNKD50 1/2 mip x ght 12/144 $ 9.34 HNKD75 3/4 mip x ght 12/ HNKD Series HBD Series Brass Boiler Drains HBD50 1/2 mip x ght 12/ HBD75 3/4 mip x ght 12/ HBD50SB 1/2 w/ stuffing box mip x ght 12/ HBD75SB 3/4 w/ stuffing boxmip x ght 12/ Brass Full Flow Boiler Drains IBD50SB 1/2 w/ stuffing box mip x ght 12/ IBD75SB 3/4 w/ stuffing box mip x ght 12/ HBD-SB Series IBD-SB Series 1/4 turn Ball Valve Brass Boiler Drain w/ Butterfly Handle IBDBV75 3/4 mip x ght 12/ IBDBV Series Brass Hose Bibbs HHB50 1/2 mip x ght 12/ HHB75 3/4 mip x ght 12/ HHB Series HHBNHT Series Has combination 1/2 mip and 1/2 solder connection 5/15/
14 Plumbing Valves - LEADED Brass, Low Pressure BENT NOSE GARDEN ANGLE SILL COCKS FROST PROOF SILL COCKS 125 PSI WOG (working pressure - non-shock) Imported i Reduced price - Limited quantities available. Part Number Size Description Ctn/Case Qty List Price H500 Series H500AS Series Chrome Plated Brass Frost Proof Sill Cocks, IPS x Sweat Fitting H504 1/2 x 4 2/ H506 1/2 x 6 2/ H508 1/2 x 8 2/ H510 1/2 x 10 2/ H512 1/2 x 12 2/ H514 1/2 x 14 2/ Chrome Plated Brass Anti-Siphon Sill Cocks* w/ 1/2 mip x 1/2 swt connection H504AS 1/2 x 4 2/ H506AS 1/2 x 6 2/ H508AS 1/2 x 8 2/ H510AS 1/2 x 10 2/ H512AS 1/2 x 12 2/ H514AS 1/2 x 14 2/ * with integral vacuum breaker Vacuum Breaker Meets ASSE 1011 specifications HVB75 3/4 fght x mght 20/200 $ 7.54 HVB75 2/20/
15 Plumbing Valves - Celcon, CPVC AGHBF Series AGBDM Series AGSCC Series AGSFT Series AGBDF Series Celcon (Acetal) Hose Bibb & Boiler Drain Features: Celcon (acetal) construction for use in hot or cold fluid systems up to 180 F. Use with water and approved chemicals. Bronze color body with red T-handle or wheel handle. EPDM stem seal O-Ring for excellent chemical resistance and long life. Complies with applicable ASTM and ANSI standards. Manufactured for AGI in an ISO9001 facility. Made in USA. Celcon (Acetal) Stop & Waste and Stop Valve Features: Stop & Waste allows draining of the non-pressure side of valve via an 1/8 port (polypropylene plug included). Complies with applicable ASTM and ANSI standards. Manufactured for AGI in an ISO9001 facility. Made in USA. CPVC Stop Valve Features: High impact CPVC construction for use in hot or cold fluid systems up to 180 F. Use with water and approved chemicals. Beige color body with red wheel handle. EPDM stem seal O-Ring for excellent chemical resistance and long life. Complies with applicable ASTM and ANSI standards. Made with Flow Guard Gold material. Manufactured for AGI in an ISO 9001 facility. Made in USA. Part Number Description Size Inlet x Outlet Ctn Qty List Price AGHBM50T Celcon 45 Hose Bibb 1/2 mipt x mht 36 $ 9.07 AGHBM75T Celcon 45 Hose Bibb 3/4 mipt x mht AGHBF50T Celcon 45 Hose Bibb 1/2 fipt x mht AGHBF75T Celcon 45 Hose Bibb 3/4 fipt x mht AGSFT50T Celcon Sink Faucet w/ hose end 1/2 mipt x mht AGSFT75T Celcon Sink Faucet w/ hose end 3/4 mipt x mht AGBDM50T Celcon Boiler Drain 1/2 mipt x mht AGBDM75T Celcon Boiler Drain 3/4 mipt x mht AGBDF50T Celcon Boiler Drain 1/2 fipt x mht AGBDF75T Celcon Boiler Drain 3/4 fipt x mht AGSCC75S CPVC Stop Valve 3/4 slip cts x slip cts i 2/20/
16 Ball Valves - Economy PVC Molded-in-Place Economy Series PVC Molded-In-Place Ball Valve Features: Heavy duty thermoplastic white PVC (Type 1, Grade 1) construction. White body, blue handle. Tee handle on 1/2 through 2. Lever handle on 2 1/2, 3 and 4. EPDM seats provide excellent chemical resistance. EPDM o ring stem seal. 150 PSI working pressure at 73ºF water, non-shock. Maintenance free compact design. Severe shock loads and misalignment stress are absorbed by the valve body, not the ball & seat, minimizing the chance of uneven wear & leakage. Third party certified no lead to NSF/ANSI 372. Individually cartoned. Imported. EMIP TE/SE Series IPS DIMENSIONS (IN.) SIZE d d1 D L1 L H 1/ / / / / Screw Zinc Plated Steel 2 Cap ABS 3 Handle ABS 4 Ball PVC 5 Stem Seal o-ring EPDM 6 Body PVC 7 Seat Seal EPDM CV (GPM/(1 lbf/in 2 ) 1/2 ) Opening Rate: 90 SIZE CV 1/ / / / / FALL Threaded Slip Master Part Number Part Number Size Case Qty List Price EMIP50TE EMIP50SE 1/2 210 $ 1.70 EMIP75TE EMIP75SE 3/ EMIP100TE EMIP100SE EMIP125TE EMIP125SE 1 1/ EMIP150TE EMIP150SE 1 1/ EMIP200TE EMIP200SE EIMP250TE EMIP250SE 2 1/ EMIP300TE EMIP300SE EMIP400TE EMIP400SE
17 Ball Valves - PVC Sch 80 Molded-in-Place ISO 9002 Body PVC Seat Seal EPDM, PTFE Ball PVC Stem Seal o-ring EPDM Handle ABS Bolt Zinc Plated Steel Cap ABS SCH 80 Series PVC Molded-In-Place Ball Valve Features: Heavy duty thermoplastic white PVC (Type 1, Grade 1) construction. Materials meet NSF standards. Meets ASTM 2467 Schedule 80. White body, red handle. Available with PTFE or EPDM seats providing excellent chemical resistance. EPDM o ring stem seal 150 PSI working pressure at 73ºF water, non-shock. Maintenance free compact design. Severe shock loads and misalignment stress are absorbed by the valve body, not the ball & seat, minimizing the chance of uneven wear & leakage. Individually cartoned. Manufactured for AGI in an ISO9002 facility. Third party certified to NSF/ANSI 372. Imported. HMIP TE/SE and T/S Series IPS DIMENSIONS (IN.) SIZE d D L L1 I H1 H2 W 1/ / / / / CV (GPM/(1 lbf/in 2 ) 1/2 ) Opening Rate: 90 SIZE CV 1/ / / / / WITH EPDM SEATS Threaded Slip Part Number Part Number Size Ctn Qty List Price HMIP50TE HMIP50SE 1/2 100 $ 4.17 HMIP75TE HMIP75SE 3/ HMIP100TE HMIP100SE HMIP125TE HMIP125SE 1 1/ HMIP150TE HMIP150SE 1 1/ HMIP200TE HMIP200SE HIMP250TE HMIP250SE 2 1/ HMIP300TE HMIP300SE HMIP400TE HMIP400SE WITH PTFE SEATS Threaded Slip Part Number Part Number Size Ctn Qty List Price HMIP50T HMIP50S 1/2 100 $ 9.39 HMIP75T HMIP75S 3/ HMIP100T HMIP100S HMIP125T HMIP125S 1 1/ HMIP150T HMIP150S 1 1/ HMIP200T HMIP200S FALL
18 Ball Valves - CPVC Sch 80 Molded-in-Place ISO 9002 Body CPVC Seat Seal PTFE Ball CPVC Stem Seal EPDM Handle ABS Bolt Zinc Plated Steel Cap ABS SCH 80 Series CPVC Molded-in-Place Ball Valve Features: Made with Flo Guard Gold CPVC material. Heavy duty thermoplastic CPVC construction for hot water use. NSF listed. Meets ASTM 2467 Schedule 80. CTS slip x slip - cream body, orange handle. PTFE seats providing excellent chemical resistance. EPDM O-Ring stem seal. Working pressure 75 PSI at 180 F. Maintenance free compact design. Severe shock loads & misalignment stress are absorbed by the valve body, not the ball & seat, minimizing the chance of uneven wear & leakage. Individually cartoned. Manufactured for AGI in an ISO 9002 facility. Imported Third party certified to NSF/ANSI 372. CMIP "C" Series CTS DIMENSIONS (IN.) SIZE d D L L1 I H1 H2 W 1/ / Part Number Description Ctn Qty List Price CV (GPM/(1 lbf/in 2 ) 1/2 ) Opening Rate: 90 SIZE CV 1/ / CPVC Ball Valve, Copper Tube Size, SLIP X SLIP CMIP50C 1/2 SLIP X SLIP 100 $ 8.47 CMIP75C 3/4 slip x slip CMIP100C 1 slip x slip FALL
19 Ball Valves - PVC Single Union PV1450 Series PVC Single Union Ball Valve Features: PVC Type 1 construction for compatibility in joining rigid PVC and flex vinyl pipes. PTFE seats. Double EPDM o-ring seal on stem: single EPDM o-ring seal on union end. Fully round ball prevents foreign matter from scoring seats. Tee handle for quarter turn on/off with stops. Working pressure: 150 PSI at 72ºF, 100 PSI at 120ºF. Threaded or socket. Manufactured for AGI in an ISO 9002 facility. Imported PV1452, PV1453 Series ISO 9002 Body PVC End Adapter PVC Union Nut PVC Ball PVC Stem PVC Handle ABS Union o-rings EPDM Seat Seals PTFE Stem o-rings EPDM PV1450 Series DIMENSIONS (IN.) SIZE d3 D L1 L2 L3 H W I 1 1/ PV1452 Series DIMENSIONS (IN.) SIZE d D L L1 L2 H W I 1 1/ Part Number Threaded/Slip Size Ctn Qty List Price PV /2 Slip 1-1/2 48 $ PV Slip PV /2 Threaded 1-1/ PV Threaded PV /2 Slip x Extended MIP 1 1/ PV Slip x Extended MIP PV /2 FPT x Extended MIP 1 1/ PV FPT x Extended MIP FALL
20 Ball Valves - PVC Single Union PVC Single Union Ball Valve Features: PVC Type 1 construction for compatibility in joining rigid PVC and flex vinyl pipes. Buna N O-Ring seal; HDPE seats. 1-1/4 deep sockets on both ends for extra cementing surface area. Tee handle for quarter turn on/off with stops. Working pressure: 150 PSI at 72ºF. Threaded or socket Series Part Number Threaded/Socket Size Ctn Qty List Price Socket 1-1/2 12 $ Socket Threaded 1-1/ /17/
21 Ball Valves - PVC True Union ITUV Series SCH 80 PVC True Union Ball Valve Features: Heavy duty thermoplastic grey Sch 80 PVC (Type 1, Grade 1). Full port design. Available with either EPDM or Viton o-ring stem, carrier and union seals. PTFE seats are resistant to chemical corrosion. 150 PSI working pressure at 73º water, non-shock. Working temperature -4ºF to 140ºF. Unique double union/double block design permits in-line maintenance without disconnecting pipe and with no special tools. Both ends are blocked with bayonet-style locks which prevents the ball from being blown out. Ball remains in place upon removal of valve. External adjustment for seat wear. Individually cartoned. Imported. EPDM O-Rings Socket Threaded Part Number Part Number Ctn Qty List Price ITUV50SE ITUV50TE 48 $ ITUV75SE ITUV75TE ITUV100SE ITUV100TE ITUV125SE ITUV125TE ITUV150SE ITUV150TE ITUV200SE ITUV200TE ITUV250SE ITUV250TE ITUV300SE ITUV300TE ITUV400SE ITUV400TE VITON O-RINGS Socket Threaded Part Number Part Number Ctn Qty List Price ITUV50SV ITUV50TV 48 $ ITUV75SV ITUV75TV ITUV100SV ITUV100TV ITUV125SV ITUV125TV ITUV150SV ITUV150TV ITUV200SV ITUV200TV ITUV250SV ITUV250TV ITUV300SV ITUV300TV ITUV400SV ITUV400TV ADDITIONAL ENDS - SET OF 2 INCLUDED Part Number Part Number List Price ITUV50 SOCKET END ITUV50 THREADED END $ 2.78 ITUV75 SOCKET END ITUV75 THREADED END 3.82 ITUV100 SOCKET END ITUV100 THREADED END 5.42 ITUV125 SOCKET END ITUV125 THREADED END 7.44 ITUV150 SOCKET END ITUV150 THREADED END 8.97 ITUV200 SOCKET END ITUV200 THREADED END ITUV250 SOCKET END ITUV250 THREADED END ITUV300 SOCKET END ITUV300 THREADED END ITUV400 SOCKET END ITUV400 THREADED END FALL
22 Ball Valves - PVC True Union ITUV Series PVC True Union Ball Valve Specifications: : Part Material Body PVC Stem o-ring EPDM or Viton Stem PVC Ball PVC Seat Seal PTFE Carrier o-ring EPDM or Viton Seal Carrier PVC Union o-ring EPDM or Viton End Connector PVC Union Nut PVC Handle ABS Inserted Nut C3604 (on 1/2-2 only) CV (GPM/(1 lbf/in 2 ) 1/2 ) Opening Rate: 90 SIZE CV 1/ / / / ITUV Series 1/2 thru 2 DIMENSIONS (IN.) SIZE d D1 L1 L2 L3 H1 H2 1/ / / / ITUV Series 2 1/2 thru 4 DIMENSIONS (IN.) SIZE d D2 L1 L2 H 2 1/ FALL
23 Slice Gate Valves - PVC VSGV Uni-Body PVC Slice Gate Valve Features: Designed for pool & spa, irrigation, plumbing, waste water and agricultural applications. Stainless steel shaft prevent rust and corrosion. Ozone & chemical resistant Santoprene materials. Santoprene seals are integrated to the paddle to eliminate any chance of torn or punctured gaskets. Maximum working pressure 50 psi (through 2 ). Solvent cement traps to catch excess glue. Every valve tested at double recommended working pressure. Valterra s patent pending triple o-ring neck seal to ensure against any chance of shaft leakage. Unibody Design One piece uni-body design. Combination socket ID x spigot OD for installation flexibility. Locking handle provides positive shut-off and easy gate opening. 3 Piece body Three piece configuration allows for repair or can be used as a union. Three piece configuration easily disassembles for inline service. VSGV 3 piece body Part Number Description Max PSI Ctn Qty List Price Uni-Body VSGV /2 slip x slip $ VSGV slip x slip * Unibody 2 slip hubs are 2 slip or 2 1/2 spig VSGV 3 piece body with union Three Piece Body VSGV150SL 1 1/2 slip x slip VSGV150FIPTXMIPT 1 1/2 fipt x mipt VSGV150SLU 1 1/2 slip x union slip VSGV150MTU 1 1/2" mipt x union slip VSGV150SP 1 1/2 slip x spigot VSGV150SD 1 1/2" step down pool hose x mipt ABS VSGV200SL 2 slip x slip VSGV200SP 2 slip x spigot VSGV300SL 3 slip x slip VSGV400SL 4 slip x slip w/ metal handle VSGV600SL 6 slip x slip w/ stainless handle VSGV800SL 8 slip x slip w/ stainless handle VSGV1000SL 10 slip x slip w/ stainless handle VSGV1200SL 12 slip x slip w/ stainless handle /15/
24 Slice Gate Valves - PVC SGV - SL Series PVC Slice Gate Valve Features: One piece Uni-Body PVC Construction. Guaranteed NO HUB LEAKS or loose bolts. 1/4 turn Cam-Lock for 100% shut-off.. Internal snap-lock feature ensures valve will remain totally open, providing 100% flow with no restriction. Stainless steel shaft prevents rust and corrosion. Glass filled poly-pro tapered gate design for 100% sealing. Integrally molded seal on gate. - No pinched or torn gaskets. Seals are Santoprene that have been impregnated with a permanent lubricant. Never needs lube yet will provide continuous smooth operation. Ozone and chemical resistant for much longer life. Santoprene buttons on gate provides smooth operation without sticking. Every valve water tested at 100PSI and random quick burst tested at 400 PSI. Virtually no chance of leaky valves in the field at standard operating pressures. Maximum recommended operating pressure is 50 PSI. Glue wells on all slip-socket configuration catches excess glue during plumbing. Constructed and tested for use in pool & spa applications. Made in USA SGV-Sp and SGV-SLU Series Part Number Size Description Ctn/Case Qty List Price SGV150SL 1 1/2 Slip x Slip 14/56 $ SGV200SL 2 Slip x Slip 12/ SGV250SL 2 1/2 Slip x Slip 5/ SGV150SP 1 1/2 Slip x Spigot 14/ SGV200SP 2 Slip x Spigot 12/ SGV150SLU 1 1/2 Slip x Slip with Union 10/ SGV200SLU 2 Slip x Slip with Union 10/ /17/
25 Butterfly Valves - Ductile Iron HBFV Series * Ductile Iron Butterfly Valve Features: Designed for swimming pool, irrigation and water systems. Wafer body features 4 alignment holes. Lever lock handle (spring loaded) provides excellent manual control for balancing or shut off services. Notched throttling plate allows balancing in 10º increments in any position desired within 90º arc rotation of the disc. Positive bubble-tight shutoff with minimum torque. Seat face eliminates need for flange gaskets. Phenolic backed seats prevent collapse, are stretch resistant, blowout proof and field replacable. EPDM seats temperature rated at -30 F to 275 F. 420 stainless steel shaft Bidirectional dead-end capability for 250 psi (2-12 ). Compatible with ANSI 125/150 flanges. Designed to comply with MSS SP-67 and API 609. Ductile iron, ENP plated disc. Imported HFBV GEAR Series Part No. Size Weight(lbs) Ctn Qty List Price Ductile Iron ENP Plated Disc* HBFV $ HBFV21/2 2-1/ HBFV HBFV HBFV HBFV HBFV HBFV HBFV Ductile Iron ENP Plated Disc - GEAR DRIVE * HBFV6-GEAR HBFV8 GEAR Replacement Handles for HBFV Series BFH2 2" BFH3 3" BFH4 4" BFH5 5" BFH6 6" BFH8 8" BFH10 10" BFH12 12" Flanges & Bolt kits available, see page /15/
26 Butterfly Valves - Ductile Iron No. Part Material 1 Body ductile Iron 2 Disc Ductile Iron 3 Seat EPDM 4 Shaft 420 Stainless Steel 5 Key Carbon Steel 6 O-ring EPDM 7-9 Bushing Nylon SIZE \ DIMENSION (in) for HBFV Series A B C D E F G H J K L2 M2 N O / FALL
27 Butterfly Valves - PVC Sch 80 PVC Sch 80 Butterfly Valves Features: 150 PSI working pressure. PVC body, polypropylene disc, and EPDM seat and o-ring. Flanged end design. Corrosion resistant. Excellent flow characteristics. Ideally suited for flow control in a minimum piping space. Clear indication of disc opening degree. Built in seat requires no additional gaskets between flanges. Manufactured for AGI in an ISO 9002 facility. Imported. PBFV Series ISO 9002 No. Part Material Qty 1 Body PVC 1 2 Disc PP 1 3 Seat Seal EPDM 1 4 Stem SS O-ring EPDM 2 6 O-ring EPDM 2 7 Inserted Nut SS Large Handle ABS 1 9 Small Handle ABS 1 10 Spring Lock ABS 1 11 Handle Insert SS 1 12 Handle Lever SS Spring SS Spring Pin SS Spring Pin SS Washer SS Locking Plate SS Gear Seat PP + GF 1 19 Washer SS Bolt SS Nut PVC 1 22 Insert Nut C Level SS Rivet SS 2 CV (GPM/(1 lbf/in 2 ) 1/2 ) Opening Rate: 90 SIZE CV / DIMENSIONS \ SIZE (in) 2 2 1/ D D D D L H H W W W n-oe Part Number Description Ctn Qty List Price PBFV2 2 PVC Butterfly valve 4 $ PBFV21/2 2 1/2 PVC Butterfly valve PBFV3 3 PVC Butterfly valve PBFV4 4 PVC Butterfly valve PBFV5 5 PVC Butterfly valve PBFV6 6 PVC Butterfly valve PBFV8 8 PVC Butterfly valve Replacement handles PBFV2 HANDLE 2 PVC valve handle PBFV21/2 HANDLE 2 1/2 PVC valve handle PBFV3 HANDLE 3 PVC valve handle PBFV4 HANDLE 4 PVC valve handle PBFV5 HANDLE 5 PVC valve handle PBFV6 HANDLE 6 PVC valve handle PBFV8 HANDLE 8 PVC valve handle FALL
28 Flanges, Bolt Kits, Gaskets PVC Sch 80 Van Stone Flange Features: Two-piece van stone socket style. Class 150, Schedule 80 Improve the security and safety of connections between pipes, valves & fittings. Imported - Manufactured for AGI in an ISO 9002 facility. PF Series ISO 9002 DIMENSIONS \ SIZE (in) D D D d d d H T I n-oe Part Number Description Ctn Qty List Price PF2 2 Flange 60 $ PF21/2 2 1/2 Flange PF3 3 Flange PF4 4 Flange PF6 6 Flange PF8 8 Flange PF10 10 Flange PF12 12 Flange Bolt Kit Features: For use with cast iron & PVC butterfly valves. BF8200, HBFV and PBFV Series ASTM-A307 grade black steel bolts and A563 finished nuts. Washers and Gaskets NOT included- Available upon request. BBK Series Part Number Valve Size Bolt Size Bolts/Kit Ctn Qty List Price BBK2 2 5/8 x $ BBK2.5/3 2 1/2 and 3 5/8 x 5 1/ BBK4 4 5/8 x BBK5/6 5 and 6 3/4 x 6 1/ BBK8 8 3/4 x BBK /8 x 7 1/ BBK /8 x 8 1/ Red Rubber Gasket Features: For use with butterfly valves, Sch 80 flanges Red rubber, 150 lbs., 1/8 full face. GSK Series Part Number Valve Size List Price GSK11/2R 1 1/2" $ 6.45 GSK2R 2" 8.72 GSK21/2R 2 1/2" GSK3R 3" GSK4R 4" Part Number Valve Size List Price GSK5R 5" $ GSK6R 6" GSK8R 8" GSK10R 10" GSK12R 12" FALL
29 Butterfly Valve Installation Kits Butterfly Valve Installation Kit Features: Everything needed for a quick, easy butterfly valve installation. Available with PVC Sch 80 or Ductile Iron butterfly valves. Custom kits available upon request. PVC Butterfly Valve Installation Kit Includes: One PBFV Series PVC Sch 80 Butterfly valve. Two PF Series PVC Sch 80 Van Stone flanges. Two red rubber GSK gaskets. Bolt kit with steel nuts and bolts. Steel washers. PBVIK Series Part Number of Number of Number Size Nuts/Bolts Washers Ctn Qty List Price PBVIK2 2 Kit $ PBVIK21/2 2 1/2 Kit PBVIK3 3 Kit PBVIK4 4 Kit PBVIK6 6 Kit PBVIK8 8 Kit Ductile Iron Butterfly Valve Installation Kit Includes: One HBFV Series Ductile Iron Butterfly valve. Two PF Series PVC Sch 80 Van Stone flanges. Bolt kit with steel nuts and bolts. Steel washers. Rubber gaskets NOT included. (Extended EPDM seat on the HBFV valve acts as gasket seal with flange.) PHBFV Series Part Number of Number of Number Size Nuts/Bolts Washers Ctn Qty List Price PHBFV2NG 2 Kit $ PHBFV3NG 3 Kit PHBFV4NG 4 Kit PHBFV6NG 6 Kit PHBFV8NG 8 Kit * PHBFV10NG 10 Kit * PHBFV12NG 12 Kit * * Shipped in two cartons 5/15/
30 Wall Hydrants - Commercial Model 6500 Typical Installation. The Clayton Mark Model 6500 is a freeze proof sanitary, self-draining, through-the-wall commercial wall hydrant. The Model 6500 is engineered for use on commercial buildings such as restaurants, office buildings, shopping centers, hotels, schools, apartments, and many other types of industrial buildings. Model 6500 Features: IAPMO listed. Vacuum Breaker/Backflow Preventer approved under ASSE Standard Patented design by Clayton Mark (Patent No ) operates at lower differential pressures than most vacuum breakers & features a self-cleaning design to help prevent clogging, 3/4 outlet. Simple, solderless design ensures years of trouble free operation. Natural brass finish blends in well with exterior finish and is more resistant than plated surfaces to weathering and normal usage. Positive shut-off with a plug type seal. Requires less force to operate. 400 Series stainless steel operating rod. Heavy duty brass pipe is stronger than ordinary copper tubing. Threaded & sealed joints eliminate problems associated with solder joints. Multiple vent holes ensure proper drainage and reduce problems associated with insect nesting. Custom brick cutting virtually eliminated by the unique low profile hydrant face. Standard hydrant can be used with or without a box. No need for dual inventories or multiple models to track. Simple design enables easier and more stable clamping to inner wall. On non-brick surfaces, the design will enable a more secure hold. Application: Provides a year round source of water to areas of structures that are subject to freezing temperatures. The patented integral vacuum breaker/backflow preventer provides protection against cross-connection with the potable supply, while venting to eliminate the possibility of a vacuum. An operating key is included to operate the hydrant and is removable to help prevent unauthorized use of the hydrant and reduce vandalism. No special installation tools are required. Materials of Construction: Brass All pressure-containing components (Head, Valve Body, Drive Screw, Hose Piece, Hex Face Nut, Pipe Casing). Stainless Steel Operating Rod Butyl Rubber Plunger (W/Brass Insert) Buna-N-Rubber O-Rings Silicon Rubber BFP Diaphragm Acetal BFP Check Spider Specify As Follows: Wall hydrant shall be the freeze-proof Clayton Mark Model 6500 with automatic draining capabilities and patented integral vacuum breaker/backflow preventer, 3/4 hose connection, freeze-proof water flow and self-draining functions, one-piece valve plunger, natural brass finish, stainless steel operating rod, and positive seal shut-off mechanism. Operating key to be furnished with each hydrant. Wall thickness to be * inches. Universal repair kits available to rebuild all moving parts subject to normal wear. * 4 to 24 in 2 increments FALL
31 Wall Hydrants - Commercial Commercial Wall Hydrant Features: Automatic freezeless wall hydrants. Single check hose connection. Anti-siphon vacuum breaker. Drain when handle is shut off. All lengths will have cartridge style plunger. SPECIAL ORDER ONLY - ALLOW 4-6 WEEKS FOR DELIVERY Operating Rod Overall Part Wall Assembly Hydrant List Number Thickness Length (A) Length (B) Ctn Qty Price Commercial Wall Hydrants, Freezeproof, Sanitary and Self-Draining, without box CWHO /8 1 $ CWHO / CWHO / CWH / CWH / CWH / Wall Hydrant Repair Kits CRK1 Repair Kit I (Minor) CRK2 Repair Kit II (Major) * Replacement rods are available. Please note length and description of plunger or cartridge seal. Price availalble upon request. 11/14/
32 Wall Hydrants - Specifications MODEL 6500 ROUGH-IN DIMENSIONS REPLACEMENT PARTS * Items 2, 5 & 9 are included in minor repair kit CRK1 All items except 3 & 4 are included in major repair kit CRK2 FALL
SECTION P POOL & SPA PRODUCT LINE
SECTION P POOL & SPA PRODUCT LINE PAGE 3 way valves...............................................16 Ball Valves, Single Union..................................15-16 Molded in place......................................17-20
More informationBall Valves. Full Port Ball Valves - Compression w/ Drain Cap - Forged Brass. Full Port Mini Ball Valve - Forged Brass 05/06/15
05/06/15 G8 Full Port - Compression w/ Drain Cap - Forged Brass Rated for cold water, oil & gas Blow-out proof stem Temperature Range: -30 to 150C (-22 to 302F) Working Pressure: 600 psi Blue handle Lead-Free
More informationVacuum Breakers. Brass Construction 3/4 MHT Outlet
Vacuum Breakers Brass Construction 3/4 MHT Outlet MASTER ITEM # DESCRIPTION INNER CAR- TON QTY CARTON QTY HPVVBRB 3/4 FHT x 3/4 MHT Rough Brass 20 200 HPVVBCP 3/4 FHT x 3/4 MHT Chrome Plated 20 200 1 Body
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationPLUMBING VALVES TOTAL MAINTENANCE SOLUTIONS
BRONZE STOP VALVES Domestic Import 40300283 1/4 Iron pipe thread 57842032 3/8 Iron pipe thread 40300284 1/2 Iron pipe thread 57021034 40300285 3/4 Iron pipe thread 57021036 BR ONZE GATE VALVES 125 psi.
More informationSECTION P POOL & SPA PRODUCT LINE
SECTION P POOL & SPA PRODUCT LINE PAGE 3 way valves...............................................16 Ball Valves, Single Union..................................15-16 Molded in place......................................17-18
More informationJones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
More informationSECTION 2 FOOT & CHECK VALVES YARD HYDRANTS
SECTION 2 FOOT & CHECK VALVES YARD HYDRANTS PRODUCT LINE PAGE Check Valves NL Brass, Brass, Bronze, Stainless Steel..............1-4 Clayton Mark....................................7-9 Plastic..........................................15
More informationROUGH PLUMBING. premium industrial products
ROUGH PLUMBING premium industrial products PREMIUM QUALITY PLUMBING PRODUCTS AMRAM AFFILIATE BRANDS For years, Cambridge Resources has been a primary source of premium quality cable management, hose clamps,
More informationSECTION 2 FOOT & CHECK VALVES YARD HYDRANTS
SECTION 2 FOOT & CHECK VALVES YARD HYDRANTS PRODUCT LINE PAGE Check Valves NL Brass, Brass, Bronze, Stainless Steel..............1-4 Clayton Mark....................................7-9 Plastic..........................................15
More informationcatalog C-NPS-1014 NIBCO Press System
catalog C-NPS-1014 ahead of the flow NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
More informationA. This Section includes the following domestic water piping specialties:
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following domestic water piping specialties: 1. Backflow preventers. 2. Water pressure-reducing
More informationCNC DISTRIBUTION. ITEM NO Description Quantity
Valves CNC DISTRIBUTION Brass Ball Valves ITEM NO IPS Ball Valve *600# PSI WOG 150 PSI WSP * Heavy Pattern Forged Brass Construction *Full Port For Maximum Flow *Teflon Seats * Teflon Stem Packing * AGA,
More informationCATALOGUE Valves ~ Faucets ~ Specialties ~ Fittings & Nipples
CATALOGUE 2015 Valves ~ Faucets ~ Specialties ~ Fittings & Nipples CATALOGUE SECTIONS Click to go to section Pages 1-1 to 1-16 Pages 2-1 to 2-10 Pages 3-1 to 3-30 Pages 4-1 to 4-28 Part Number Numerical
More informationValve Selection. 1. Function and service considerations
1. Function and service considerations Valve Selection Selection Valves serve the purpose of controlling the fluids in building services piping. Valves are produced in a variety of design types and materials.
More informationANGLE BALL VALVES STRAIGHT BALL VALVES STRAIGHT BRASS BALL VALVES BARB BRASS BALL VALVES. Description STANDARD PORT BALL VALVES.
ANGLE BALL VALVES IBVA4-2M ibva4-4 1/4" COMPRESSION x 1/8" MPT chrome angle ball valve 1/4" COMPRESSION x 1/4" FPT chrome angle ball valve STRAIGHT BALL VALVES IBV4-4 1/4" FPT X 1/4" FPT INLINE CHROME
More information5015AB ECO-VALVE. Low Lead Brass Pex End Ball Valve
ECO-VALVE 5015AB Low Lead Brass Pex End Ball Valve 400# WOG Regular Port Virgin PTFE Seats For use with PEX Tubing Barb x Barb Blow-Out Proof Stem Double NBR O-ring Packing ASTM F1960 NSF 61 & NSF 372
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More informationVES VAL NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW
...170-214 LEAD FREE...171-174 LEAD FREE BALL...171-173 BRASS...175-197 LF Gate and Check valves... 174 Full Port Ball... 175 Locking Handle... 176 Butterfly Handle... 177 MIP x FIP... 188-189 N/P Ball
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationBRASS & BRONZE VALVES
BRASS & BRONZE VALVES V200 series Cast Brass are economical general service valves. Ball valves feature chrome plated balls with teflon seats, adjustable packing glands and blowout-proof stems. V205 gate
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More information2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954
R 2010 PRODUCT CATALOG QUALITY AND COMMITMENT TO TECHNOLOGY AND SERVICE SINCE 1954 R The Isolator Uni-Flange Ball Valve FullPortForgedBrassBallValves Forged Ball w/ Bonus Wing Style T Handle, Nuts & Bolts
More informationFrost-Proof Wall Hydrant Installation, Use & Repair Guide
Frost-Proof Wall Hydrant Installation, Use & Repair Guide 420 Anti-Siphon Series 450 Standard Series 40 Arrow-Breaker Series Arrow-Breaker See Pages 4-5 See Pages -7 See Pages 8-9 470 Freeze-Proof Series
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More informationBOSHART INDUSTRIES BRASS GATE VALVE WITH DRAIN
BOSHART INDUSTRIES 2-2 SERIES 0813 BRASS GATE VALVE WITH DRAIN 0 PSI W.O.G. (Cold water, oil, gas) Black cast hand wheel Non-rising stem - solid wedge disc Threaded & CxC 0813-05 0813-07 0813-0.508 0.760
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationButterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
More informationintroduction FE Series Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 IPEX FE Series Butterfly Valves incorporate many features of our industrial FK valve, yet the all PVC construction and EPDM liner make this valve
More informationLead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
More informationSECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
More informationQUALITY YOU CAN BUILD ON CONDENSED CATALOG
QUALITY YOU CAN BUILD ON CONDENSED CATALOG Pressed for time? JUST PRESS, CRIMP AND TRIPLE YOUR PRODUCTIVITY 1. Reduce installation time up to 68% with Hammonds s extensive new line of UltraPress press-connection
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationA. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCATALOG C-PSP-0311 AHEAD OF THE FLOW. Plumbing Specialty Products
CATALOG C-PSP-0311 AHEAD OF THE FLOW Plumbing Specialty Products Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationCustomer Service : Tel Toll-free Fax
Table Of Contents Terms and Engineering Data...2 Lead-Free Brass Ball Valves...3-4 TFP600-LF Full port, 2-piece body, lead-free, Threaded Ends...3 SFP600-LF Full port, 2-piece body, lead-free, Solder Ends...4
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationRESILIENT SEATED BUTTERFLY VALVES
DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or
More informationWATTS/Taras. Water Treatment Valves and Accessories. Commercial. Residential
WATTS/Taras Water Treatment Valves and Accessories Residential Commercial Taras Valve Company, a division of Watts Industries, has been manufacturing quality by-pass valves and accessories for the Water
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More informationHVAC. Products. TRI A FLO Automatic Cartridges PAGE 2. TRI Y FLO Strainer PAGE 3. TRI U FLO Accessory Union PAGE 4. CB Series Butterfly/Venturi PAGE 5
HVAC TRI A FLO Automatic Cartridges TRI Y FLO Strainer TRI U FLO Accessory Union Products Automatic balancing valves.5 thru 108.0 in Brass, Stainless, PVC, CPVC, Titanium, Ceramic, Monel, and more PAGE
More informationProduct Profile. Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK. Global sourcing. National compliance. Local service.
Product Profile CALIFORNIA TEXAS ILLINOIS GEORGIA NEW YORK Global sourcing. National compliance. Local service. 1 Introduction Matco-Norca is the leading supplier of globally sourced, code-compliant Plumbing
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
More informationHouse Hydrant V2 FROST-FREE OUTDOOR WALL HYDRANT. aqu r FLUSH-MOUNT NON-FREEZE SELF-DRAINING ANTI-SIPHON.
House Hydrant V2 FROST-FREE OUTDOOR WALL HYDRANT FLUSH-MOUNT NON-FREEZE SELF-DRAINING ANTI-SIPHON www.aquorwatersystems.com Overview and Feature List HOUSE HYDRANT V2 - IN-WALL OUTDOOR FAUCET SYSTEM Flush-mounted
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationintroduction FK Series Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process
More informationGENE RICH SPECIALTIES
All s Final - No Returns Allowed Attn: Plumbing Specialties Buyers Limited Time for Super Savings on Select Items: Faucets and Supplies Compression Tees and Couplings Dielectric Unions Red, Yellow and
More informationCUSTOMIZE MORE AND MORE WAYS TO ABC PLUMBING FREE CUSTOMIZATION! ABC PLUMBING SEE BACK FOR DETAILS.
APRIL / MAY / JUNE 2017 MORE AND MORE WAYS TO CUSTOMIZE ABC PLUMBING ABC PLUMBING FREE CUSTOMIZATION! SEE BACK FOR DETAILS. AX Carbide Teeth Sawzall Blades Fang Tip for faster plunging Nail guard rips
More informationMADE IN THE USA BACKFLOW PREVENTERS
MADE IN THE USA BACKFLOW PREVENTERS TABLE OF CONTENTS Selection Guide........................................................................3 Double Check Valve (Series 40-100)......................................................4,5
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationEverTUFF CPVC CTS Fittings, Valves, Pipe & Cement
CTS CPVC uct EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement EverTUFF CPVC CTS Fittings, Valves, Pipe & Cement PRODUCT Contact Spears for any Information not found. Page 1 Spears Manufacturing Company
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationVALVES & FITTINGS HYDRONICS HYPERPURE TM
Consolidated Price List Valves & Fittings, Hydronics, HyperPure TM Tubing, LT-CWS0616R, Effective Date: June 28, 2016 Supersedes April 1, 2014 LT-WS0414 & September 11, 2015 LH-MPL0915 VALVES & FITTINGS
More information2010 EDITION PART 2. Butterfly, Gate, Globe, Needle & Diaphragm Valves. Thermoplastic Valves, Strainers & Accessories
PART Thermoplastic Valves, Strainers & Accessories Butterfly, Gate, Globe, Needle & Valves See Spears On-line Catalog for most current pricing, updated daily. P R E V E N T I O N L O S S C E R T I F I
More informationThe applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationType 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More informationintroduction VM Series Manual Diaphragm Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D3222 ASTM D2467 ASTM D2466 ASTM D1785 ASTM D1784 ASTM F441 ASTM F439 IPEX VM Series Diaphragm Valves are the ideal solution f modulating
More informationHouse Hydrant V1 FROST-FREE OUTDOOR WALL HYDRANT. aqu r FLUSH-MOUNT NON-FREEZE SELF-DRAINING.
House Hydrant V1 FROST-FREE OUTDOOR WALL HYDRANT FLUSH-MOUNT NON-FREEZE SELF-DRAINING www.aquorwatersystems.com Overview and Feature List HOUSE HYDRANT V1 - IN-WALL OUTDOOR FAUCET SYSTEM Flush-mounted
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationVALVES & FITTINGS HYDRONICS HYPERPURE TM
Consolidated Price List Valves & Fittings, Hydronics, HyperPure TM Tubing, LT-CWS0616, Effective Date: June 28, 2016 Supersedes April 1, 2014 LT-WS0414 & September 11, 2015 LH-MPL0915 VALVES & FITTINGS
More informationCATALOG: Pipe & Valves
CATALOG: Pipe & Valves **Wolff Bros. Supply, Inc. reserves the right to substitute like products. Product information is subject to Manufacturer rolling changes and/or typographical errors. Wolff Bros.
More informationHOSE BOXES. Includes hose boxes, supply boxes & hose valves MORRIS GROUP INTERNATIONAL
HOSE BOXES Includes hose boxes, supply boxes & hose valves MORRIS GROUP INTERNATIONAL INTEGRAL STOP NON-FREEZE WALL VALVE & BOX Integral Stop Wall Valve & Box with Non-freeze Protection Typical Applications
More informationPRESS SWING CHECK VALVES. UPC NSF1-8 Double O-Ring Blow Out Proof Stem 250 CWP Max Temp: 300 F
PRESS 1 PRESS SWING HEK Lead Free ompliant One-Piece Body Design EPDM O-Ring Seal Heavy Pattern ast Brass Press Swing heck Valve One-piece body design EPDM o-ring seal Heavy pattern cast brass construction
More informationAnti Siphon Ballcock RP Anti-Siphon Ballcock
UR PS1115 Effective November 1, 2015 (SUPERCEDES PS0514 ) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Anti Siphon Ballcock 109-603RP Anti-Siphon
More informationHenderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
More informationF low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Vacuum breakers. 2. Backflow preventers. 3. Water pressure-reducing valves. 4. Balancing valves.
More informationButterfly Valves. watts.com
Butterfly Valves watts.com Durafil is a registered trademark of Cargill, Limited. Teflon is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated. Uniseal is a registered trademark
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationTABLE OF CONTENTS. BALL VALVE Full port Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13
TABLE OF CONTENTS BALL VALVE Full port...4-5 Standard port...5 Gas...5 Pex...6 Long bonnet...8 T-handle...5 Balancing valve...13 STOP VALVE Straight stop...8 Angle stop...8 Long bonnet...8 Stop & Waste...7
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationPneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
More informationTransportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationSeries 8500 Grayline Butterfly Valves
Series 8500 Grayline Butterfly Valves Features State-of-the-Art Manufacturing: Valves are produced using state-of-the-art manufacturing equipment. Each valve is tested to 110% of rated working pressure
More informationAGRICULTURAL WATER CONTROL PRODUCTS PRODUCTS AT-A-GLANCE
AGRICULTURAL WATER CONTROL PRODUCTS PRODUCTS AT-A-GLANCE WATER DISTRIBUTION & CONTROL / DRAINAGE CONTROL / IRRIGATION CAST IRON CANAL GATES C-10 & C-20 "RED TOP" SERIES Waterman Canal Gates offer reliable
More informationVT Series 3-Way Ball Valves Product Data Sheet. Valve Availability. Size Range: 1/2" through 2" EPDM or Viton (FPM)
Product Data Sheet < SANDARDS > introduction ASM D1784 ASM D4101-86 ASM D2466 ASM D2467 ASM D2464 ASM F1498 IPEX can be used for flow diverting, mixing, or on/off isolation. hey will replace a ee + 2 valve
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More informationWafer Butterfly Valves
Page 126 Wafer Butterfly Valves Wafer valve lever Ductile iron disc 21/ * * * 97495 97496 97497 97501 97502 97503 97504 97505 97506 8.6 9.0 11.5 12.9 17.0 32.4 48.0 76.0 55.00 58.00 63.00 85.00 110.00
More informationTKD Series 3-Way Automated Ball Valves Product Data Sheet. Body Material: PVC Size Range: 1/2" through 2"
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F1498 IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation.
More informationHVAC Products 2016 EDITION NCI CANADA INC.
HVAC Products 2016 EDITION NCI CANADA INC. YOUR SINGLE SOURCE SOLUTION NCI Canada Inc. is a Canadian National master distributor of high quality valves, fittings, pipes and related products serving residential,
More informationCATALOG C-NPS-0812 AHEAD OF THE FLOW. NIBCO Press System
CATALOG C-NPS-0812 AHEAD OF THE FLOW NIBCO Press System Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and
More informationLug Style Butterfly Valve Type 578
Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More information