MX Wall Mount LCD Arm

Transcription

1 User's Guide MX Wall Mount LCD Arm For the latest User Installation Guide please visit: W-01 rev. F 04/15 User's Guide - English Guía del usuario - Español Manuel de l utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語用户指南 : 汉语 Includes Constant Force Technology 1/14

2 Safety Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. WARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt about what this means in regard to your particular application. NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light duty thread locking adhesive to fasteners before installation to prevent back-out. WARNING! Pinch Point WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or equipment damage! 2/ W-01 rev. F 04/15

3 1 Features & Specifications 5" (130 mm) lbs ( kg) Components A B C D E 1x 1x 1x 1x 2x 1 M3 x 6mm 14mm 2.5mm M4 x 10mm M4 x 10mm 2x 2x 1x M8 x 80mm 2x 8mm M4 x 12mm M5 x 7mm M5 x 12mm 1/8" x 3/8" 5 M6 x 12mm M8M5 Converter M5 x 20mm Tools Needed 1/2" (13mm) Concrete Wall Mounting Ø 3/8 (10mm) Wood Stud Mounting Ø 3/16" (5mm) 2 Stud Finder W-01 rev. F 04/15 3/14

4 Mounting Height for Ergonomic Workstation This mounting height is a recommendation for an ergonomic workstation that accommodates user heights of 5'4"-5'9" ( cm) when set up for standing and user heights of ( cm) when set up for sitting. If user heights are different than this, you should change mounting height to accommodate user heights. (Change mounting height one inch for every one inch difference in user heights). 6 (152 mm) ( cm) Mounting height assumes there is a 6 (152 mm) distance between the center of your monitor mounting holes and the top of the screen. If your distance is smaller, you should increase mounting height accordingly, if your distance is larger, you should decrease your mounting height accordingly. 41 (1041mm) ( cm) 2.37 (60 mm) Top View x 3/8" 2x 6mm 2x M8 x 80mm 6.44 (165 mm) 6 (152 mm) 7.32 (186 mm) 3.03 (77 mm) 10 (254 mm) mm) (28.6 mm) 3.5 (89 mm) 4.1 (104 mm) 13" (330 mm) 8" (200 mm) 4.51 (115 mm) 0.86 (22 mm) 4.41 (112 mm) 0.70 (18 mm) 25.5 (647mm) 5 (128 mm) 21.65" (550 mm) 16.65" (423 mm) Determine mounting location: Front view with arm pushed back against the wall (445mm) 11.8 (300mm) 13.8 (351mm) 16.5 (419mm) 3.5 (89mm).85 (21mm) 4/ W-01 rev. F 04/15

5 1Choose Mounting Method. Ergotron product. NOTE: Wall Track and Brackets sold separately. 1/8" x 3/8" When attaching to Pole Clamps, use x 3/8 screws included with pole brackets, Do NOT use x 1/2 screws Concrete 5 Wood W-01 rev. F 04/15 5/14

6 1 Concrete a b c d 2x e 3-1/8" (80 mm) Ø 3/8" (10 mm) WARNING: Mounting holes must be at least 3-1/8 (80mm) deep and must be located within solid concrete, not mortar or covering material. If you drill into an area of concrete that is not solid, reposition mounting holes until both anchors can be fully inserted into solid concrete! WARNING: Anchors that are not fully set in solid concrete will not support the applied load resulting in an unstable, unsafe condition which could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt about what this means in regard to your particular situation. 6/ W-01 rev. F 04/15

7 1 Wood a b c d Ø 3/16" (5 mm) 2 M8 2x x 80mm 2x 1/2" (13mm) 8mm CAUTION: Make sure the wall mount bracket is level, flush and snug to the wall surface. DO NOT OVERTIGHT- EN THE BOLTS W-01 rev. F 04/15 7/14

8 3 0 1x M3 x 6mm 4 Check size of TV/Monitor hole pattern TV/Monitor Hole Pattern Sizes VESA Adapter Configurations 75mm (2-15/16 ) A 75x75mm 100x100mm 8 75mm (2-15/16 ) B 100x200mm 9 C 200x200mm 9 D 200x100mm 9 8/ W-01 rev. F 04/15

9 OR 4 Mount Type A TV/Monitor to Arm 5mm 100mm A 75x75mm 100x100mm 75mm 100mm (2-15/16 ) (3-15/16 ) 75mm (2-15/16 ) 75mm (2-15/16 ) 75mm (2-15/16 ) 75 x 75mm M4 x 10mm M4 x 10mm 100 x 100mm M4 x 10mm M4 x 10mm W-01 rev. F 04/15 9/14

10 B C D 100x200mm 200x200mm 200x100mm 4a Mount VESA Adapters to Arm based on TV/Monitor hole pattern size (B, C, or D). M5 x 7mm 4b Mount Type B, C, or D TV/Monitor to Arm NOTE: To reduce M8 holes for use with M5 screws, or if you have a model with Samsung holder rings, follow the M8M5 KIT instructions on the next page. OR OR OR OR M4 x 12mm M5 x 12mm M6 x 12mm 11 10/ W-01 rev. F 04/15

11 M8M5 KIT Instructions NOTE: Follow this step only if your TV/monitor has M8 holes which need to be reduced to M5. Install M8M5 reducer bushing to TV/Monitor and use M5 x 20 mm monitor screws to secure. M5 x 20mm TV/Monitor Mounting M8 size hole NOTE: Follow this step only for Samsung models using the holder ring. Install M8M5 reducer bushing to TV/Monitor then use M5 x 20 mm monitor screws and Samsung holder ring to secure. M5 x 20mm TV/Monitor Mounting M8 size hole Holder Ring (Not included *Samsung Only) W-01 rev. F 04/15 11/14

12 5 a b 2.5mm 6 Cable Routing 12/ W-01 rev. F 04/15

13 7 Adjustment Step Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. a Lift Up and down 5" (130 mm) 14mm Increase Lift Strength If the mounted weight is too heavy or this product does not stay up when raised, then you'll need to increase Lift Strength: Decrease Lift Strength If the mounted weight is too light or this product does not stay down when lowered, then you'll need to decrease Lift Strength: b Tilt Forward and Backward mm Increase Friction If this product moves too easily, then you'll need to increase friction: Decrease Friction If this product is too difficult to move, then you'll need to decrease friction: W-01 rev. F 04/15 13/14

14 Set Your Workstation to Work For YOU! Learn more about ergonomic computer use at: Height Position top of screen slightly below eye level. Position keyboard at about elbow height with wrists flat. Distance Position screen an arm's length from face at least 20 (508mm). Position keyboard close enough to create a 90 angle in elbow. Angle Tilt screen to eliminate glare. Tilt the keyboard back 10 so that your wrists remain flat. To Reduce Fatigue Breathe - Breathe deeply through your nose. Blink - Blink often to avoid dry eyes. Break 2 to 3 minutes every 20 minutes 15 to 20 minutes every 2 hours. For local customer care phone numbers visit: 14/ W-01 rev. F 04/15