GEA Clean Rooms. Modules with laminar air flow for ceiling installation GEA Fresh Heaven j^uu GEA Fresh Heaven j^uu=mltbo.

Transcription

1 GEA Clean Rooms Modules with laminar air flow for ceiling installation GEA Fresh Heaven j^uu GEA Fresh Heaven j^uu=mltbo Data & Facts ÉåÖáåÉÉêáåÖ=Ñçê=~=ÄÉííÉê=ïçêäÇ db^=eé~í=bñåü~åöéêë

2 Range of Application... 4 product line...4 Unit features and benefits... 4 Areas of application...4 Technical Description... 5 Unit variants...5 Principle of operation (FHM)... 6 Principle of operation (FHM P)... 6 Technical Data FHM... 7 V (FHM V)... 7 S (FHM S)... 8 for operating theatres (FHM O)... 9 Technical Data FHM POWER U (FHM PU) U Cool (FHM PUC) S (FHM PS) S Cool (FHM PSC) T (FHM PT) T Cool (FHM PTC) D Cool (FHM PDC) Components Standard components Casing Standard components with selection Filters Outlets Air supply source Control and measurement Lighting Accessories / optional components Side panels Air speed sensor Dwyer Photohelic manometer Sound attenuator PVC curtains PR GB Subject to changes K0-10/2013

3 Components Standard components Casing Fan(s)... Standard components with selection Filters Outlets Air supply source Control and measurement Lighting...20 Accessories / optional components Side panels Pre-filter...20 Fresh air supply...20 Valve assembly...21 Cooling coil...21 Air speed sensor Dwyer Photohelic manometer Sound attenuator PVC curtains Project Design Instruction Dimensions and tolerances Space for valve assembly Switch box Panel height Unit Type Code Unit Specification and Quote Text PR GB Subject to changes K0-10/2013 3

4 Range of Application product line The (FHM) product line represents a new generation of Fresh Heaven units for pressurized low-turbulence fields that combines full filtration with the operating mode for local air recirculation. It is intended for clean rooms with the highest requirements for uniform vertical air flow in the pharmaceutical industry, in aseptic operating theatres and similar areas of application. The unit is available as: Basic ( passive ) FHM version: Power ( active ) version with fans operating in recirculating-air mode: Unit features and benefits Full-area filtration uniform air flow low initial pressure drop of HEPA filters Complete construction performed in stainless steel (V2A~AISI304 as standard) resistant to disinfectants and mechanical damage V4A~AISI316L is optionally available Customized dimensions (10 mm grid) to suit the customer s needs Built-in linear LED lighting safe voltage, low power consumption, long service life Various outlet types Proprietary control unit An option to connect a fan module economical EC motors automatic constant air flow control (when filters are clogged) cooling in condensation-free mode as option Areas of application Standard design solutions for pharmaceutical industries and hospitals: Pharmaceutical industry Operating theatres Air flow speed m/s m/s Dimensions As required by customer x m Central passage Not provided For mounting surgical lighting Operating mode/air supply Recirculating mode (FHM Power) or supplied by air handling unit Supplied by AHU Material Stainless steel AISI 304 Zinc-coated steel sheet painted RAL 9010 Filter seal U-section Fluid Outlets Perforated stainless steel/single-layer PES fabric Single-layer PES fabric on aluminium frame 4 PR GB Subject to changes K0-10/2013

5 Technical Description Unit variants Various configurations are available for FreshHeaven MAXX (FHM) and different versions of FreshHeaven MAXX POWER (FHM P) are illustrated in the chart below. pharmaceutical industry aseptic operating theatres Design version Length of Power module [mm] Length of laminar area La [mm] Max. area of laminar flow [m 2 ] Height of casing [mm] Max. overall height H [mm] For details see: FHM V page 7 FHM S page 8 FHM O page 9 FHM PU page 10 FHM PUC page 11 FHM PS page 12 FHM PSC page 13 FHM PT page 14 FHM PTC page 15 FHM PDC page 16 PR GB Subject to changes K0-10/2013 5

6 Technical Description Principle of operation (FHM) Treated fresh air (from an air handling unit) or return air from the room is driven into a pressure chamber that is fitted with HEPA filters which are installed horizontally across the entire area of the pressurized field (fitted via clamps to a sealed stainless steel welded frame). After passing through the HEPA filters the cleaned air is pushed through outlets along individually arranged lighting to create a protection zone around a product or a patient. Afterwards, contaminated air is extracted from the room into a central air handling unit or supplied via the power module. The height of the FHM unit is 450 mm. The dimensions are determined according to the requirements of the facility system designer. A large-size unit is divided into sections which are supplied separately and connected together on site. The joints are designed to minimize their effect on the quality of laminar air flow and should be determined during the planning stage. Principle of operation (FHM P) A unit is equipped with the Power module, fan(s) for air recirculation and a pre-filter. The maximum size of the unit is limited by the volumetric flow rate of 12,000 m 3 /h, which at the average outlet speed of 0.45 m/s corresponds to the laminar air flow field area of approximately 7.4 m 2. If a water-based coil is added to the suction chamber, the maximum volumetric flow rate is reduced to approximately 8,000 m 3 /h, which at the average outlet speed of 0.45 m/s corresponds to the laminar air flow field area of approximately 4.9 m 2. 6 PR GB Subject to changes K0-10/2013

7 H=Hc Technical Data FHM V (FHM V) Air-supply connections are located on top of the casing. The connections are rectangular and are fitted with flanges. The position and dimensions of inlet connections must be determined and specified during the planning stage. Consider the recommended average air velocity at unit inlet of 3 m/s. L = La HEPA filters W LED light Technical Data: Max. outlet length for laminar flow La [mm] 4000 Total length L [mm] 4000 Height of casing Hc [mm] 450 Max. total height H [mm] 450 Total width W [mm] 4000 Max. area of laminar flow [m 2 ] 8.8 PR GB Subject to changes K0-10/2013 7

8 H=Hc Technical Data FHM S (FHM S) Air supply connections are located on the side of the casing. The inlet connections are rectangular and are fitted with flanges. The position and dimensions of inlet connections must be determined and specified during the planning stage. L = La HEPA filters W LED light Technical Data: Max. outlet length for laminar flow La [mm] 4000 Total length L [mm] 4000 Height of casing Hc [mm] 450 Max. total height H [mm] 450 Total width W [mm] 4000 Max. area of laminar flow [m 2 ] PR GB Subject to changes K0-10/2013

9 H=Hc Technical Data FHM for operating theatres (FHM O) A special design version for operating theatres. The basic version consists of two separate sections. The air supply connections are located on the opposite sides of the casing. After assembly, space is provided in the centre of the unit to enable installation of surgical lighting. Having passed through the HEPA filters air is made more uniform by passing through a single-layer polyester laminarizer stretched across an aluminium frame. The circumference of the laminarizer is lit from above by LED lighting integrated into the sides of the casing. A PVC curtain with an optional media bridge for supply connections may be installed around the unit. The mean outlet air speed is 0.24 m/s. L h HEPA filters La HEPA filters W w Technical Data: Max. outlet length for laminar flow La [mm] 3120 Total length L [mm] 3125 Height of casing Hc = Max. total height H [mm] 450 Height of air duct h [mm] 200 Total width W [mm] 3125 Width of air duct w [mm] 1500 Max. area of laminar flow [m 2 ] 9.7 PR GB Subject to changes K0-10/2013 9

10 W H = Hc Technical Data FHM POWER U (FHM PU) U is designed for installion into false ceilings (a horizontal suction grille mounted flush with the false ceiling). Air intake is performed via a perforated metal-sheet grille and a pre-filter and pushed by a fan into the pressurized chamber above HEPA filters. Filtered clean air is supplied downwards along lights through outlets. The suction chamber is separated from the laminar air flow field by a PVC curtain. L Power module with fan Pre-filter Suction grille Lp La HEPA filter Suction chamber Technical Data: Minimum Maximum Length of Power module Lp [mm] 500 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Total height H [mm] 550 Total width W [mm] Suction chamber [mm] 500 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/2013

11 Technical Data FHM POWER U Cool (FHM PUC) U Cool is a U unit fitted with a water-based cooling coil. Coil pipes run into the rear wall (optionally to sides or upward); a valve assembly is available on request (installed outside the unit). L Water-based coil Valve assembly for coil (optional) Power module with fan H = Hc Pre-filter Suction grille HEPA filter Suction chamber W Technical Data: Minimum Maximum Length of Power module Lp [mm] 1000 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Total height H [mm] 550 Total width W [mm] Suction chamber [mm] 1000 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/

12 Technical Data FHM POWER S (FHM PS) S is designed for installation below false ceilings (a vertical suction grille, the sides and front may be fitted with panels depending on the configuration type). Pre-filter Power module with fan L Suction grille Suction chamber H = Hc HEPA filter W Technical Data: Minimum Maximum Length of Power module Lp [mm] 650 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Total height H [mm] 550 Total width W [mm] Suction chamber [mm] 650 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/2013

13 W H=Hc Technical Data FHM POWER S Cool (FHM PSC) S Cool is a S unit fitted with a water-based coil. Coil pipes run upward (optionally to sides), the valve assembly is available on request and installed outside the unit. Valve assemby for coil (optional) Pre-filter L Water-based coil Power module with fan Suction grille Suction chamber HEPA filter LED light Technical Data: Minimum Maximum Length of Power module Lp [mm] 1000 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Total height H [mm] 550 Total width W [mm] Suction chamber [mm] 1000 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/

14 Ho Hc Technical Data FHM POWER T (FHM PT) T is a equipped with a fan module for recirculating air mode with air intake performed above the floor. The air duct is fitted with a pre-filter and up to four fans in a row. The maximum size of the unit is limited by the volumetric flow rate of 12,000 m 3 /h, which at the average outlet speed of 0.45 m/s corresponds to the laminar air flow field area of approximately 7.4 m 2. The maximum length of the laminar air-flow field La can be extended to approximately 3 metres. Power module with fan L HEPA filter Lp La Suction chamber Suction grille Pre-filter Technical Data: Minimum Maximum Length of Power module Lp [mm] 500 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Overhead clearance height Ho [mm] Total height H [mm] Suction chamber [mm] 500 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/2013

15 Ho Hc Technical Data FHM POWER T Cool (FHM PTC) T Cool is an FHM POWER T unit fitted with a waterbased coil (optionally equipped with a valve assembly). Coil pipes run upward (optionally downward, to sides or backward), the optional valve assembly may be installed inside the unit. The maximum size of the unit is limited by the volumetric flow rate of approximately 8,000 m 3 /h, which at the average outlet speed of 0.45 m/s corresponds to the laminar air flow field area of approximately 4.9 m 2. The maximum length of the laminar air flow field La can be extended to approximately 2 metres. Valve assembly for coil (optional) Power module with fan L HEPA filter Lp Suction chamber Water-based coil Suction grille Pre-filter Technical Data: Minimum Maximum Length of Power module Lp [mm] 650 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Overhead clearance height Ho [mm] Total height H [mm] Suction chamber [mm] 650 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/

16 Ho Hc Technical Data FHM POWER D Cool (FHM PDC) FHM PDC is equipped with fans installed in pairs above each other to increase the length of the laminar air flow field. The maximum size of the unit is limited by the volumetric flow rate of approximately 8,000 m 3 /h (two pairs of fans), which at the average outlet speed of 0.45 m/s corresponds to the laminar air flow field area of approximately 4.9 m 2. The minimum width of the module here is 1.25 m and the maximum length of the laminar air flow field La can approximately reach 4 metres. W Valve assembly for coil (optional) Power module with fans L HEPA filter La Lp Suction chamber Water-based coil Pre-filter Suction grille Technical Data: Minimum Maximum Length of Power module Lp [mm] 650 Length of laminar flow La [mm] Total length L [mm] Height of casing Hc [mm] 550 Overhead clearance height Ho [mm] Total height H [mm] Suction chamber [mm] 650 Area of laminar flow [m 2 ] PR GB Subject to changes K0-10/2013

17 Components Standard components Casing stainless steel sides and top panels welded and sealed frame made of stainless steel profiles pre-assembled delivery for fast commissioning easy maintenance and cleaning thanks to dismountable filter clamps and lights independent suspension height 450 mm sensors for measuring aerosol concentration from the pressure chamber (leak test) Standard components with selection Filters full filtration horizontal HEPA/ULPA filters H13/H14/(U15) low initial pressure drop filter frame from aluminium profiles varnished protective grille on the clean air side U-seal easy installation and replacement (from the bottom) easy cleaning (dismountable) filter clamps Outlets A choice of various outlets: electrochemically polished and perforated stainless steel (40 % clear surface) perforated steel (40 % clear surface) RAL 9010 painted single-layer polyester fabric laminarizer (aluminium frame + stainless steel edge) Air supply source Control and measurement central-plant air handling unit switch box is mounted on the side of the casing and has following dimensions: 300 (length) x 300 (height) x 150 (depth) mm control module made by Siemens ( Siemens Logo! ) pressure switch for HEPA filters power supply for LED lights OPTIONAL: outputs to the central control panel PR GB Subject to changes K0-10/

18 Components control panel is installed into a precast panel and performs following functions: air speed indication (in daily mode) too high / = nominal / too low HEPA filter replacement indication lighting switch OPTIONAL: air speed sensor see Accessories OPTIONAL: digital manometer (Photohelic) see Accessories Lighting powerful light-emitting diode (LED) by a leading global manufacturer compact dimensions (40 mm wide) smooth plastic U-shaped diffuser for optimum air flow economical, maintenance-free, long service life safe voltage 12 VDC (+ power supply 230 VAC) lighting intensity min. 500 lx (verification calculation) Accessories / optional components Side panels side panels (brushed stainless steel) Air speed sensor speed sensor for outlet air equipped with a stainless steel bracket for mounting on a partition wall. Dwyer Photohelic manometer As standard, the pressure drop is controlled by a differential pressure switch and indicated on the control panel. This optional sensor can be replaced by a Dwyer Photohelic manometer with an upper limit control feature and an analogue display. Sound attenuator PVC curtains For additional reduction of sound level an attenuator can be optionally selected. To minimize turbulences the use of a soft wall (e.g. PVC curtains) is recommended along the borders of the laminar air flow field. PVC curtains are necessary to maximize the laminar air flow zone. Two configuratiuons of PVC curtains are available: PVC curtains, thickness 5 mm PVC strip curtains with antistatic finish, thickness = 2 mm, width = 200 mm 18 PR GB Subject to changes K0-10/2013

19 Components Standard components Casing Fan(s) stainless steel sides and top panels welded and sealed frame from stainless steel profiles pre-assembled delivery for fast commissioning easy maintenance and cleaning thanks to dismountable filter clamps and lights independent suspension height 550 mm sensors for measuring aerosol concentration from the pressure chamber (leak test) suction from the front / side perforated suction grille: stainless steel or painted steel intelligent and powerful radial fans from a leading European manufacturer electronically commutated motors (ECM) energy efficiency: direct (low power consumption during fan operation) & indirect (low consumption = reduced heat load = reduced cooling demand) power supply voltage 230 VAC; soft-start / soft-stop ; t max = 50 C zinc-coated steel spiral casing automatic constant flow control (Constant Airflow, Total Airflow Control) Standard components with selection Filters full filtration horizontal HEPA/ULPA filters H13/H14/(U15) low initial pressure drop filter frame from aluminium profiles varnished protective grille on the clean air side U-seal easy installation and replacement (from the bottom) easy cleaning (dismountable) filter clamps Outlets A choice of various outlets: electrochemically polished and perforated stainless steel (40 % clear surface) perforated steel (40 % clear surface) RAL 9010 painted single-layer polyester fabric laminarizer (aluminium frame + stainless steel edge) Air supply source recirculating-air operating mode PR GB Subject to changes K0-10/

20 Components Control and measurement switch box is mounted on the side of the Power module and has following dimensions: 600 (length) x 300 (height) x 150 (depth) mm control module made by Siemens ( Siemens Logo! ) pressure switch for HEPA filters pressure switches for pre-filters power supply for LED lights OPTIONAL: outputs to the central control panel control panel is installed into a precast panel and performs following functions: air speed indication (in daily mode) too high / = nominal / too low HEPA filter replacement indication pre-filter replacement indication lighting switch air speed alarm (too high/low) switchover between the day (nominal flow) and night (reduced flow) mode OPTIONAL: air speed sensor see Accessories OPTIONAL: digital manometer (Photohelic) see Accessories Lighting powerful light-emitting diode (LED) by a leading global manufacturer compact dimensions (40 mm wide) smooth plastic U-shaped diffuser for optimum air flow economical, maintenance-free, long service life safe voltage 12 VDC (+ power supply 230 VAC) lighting intensity min. 500 lx (verification calculation) Accessories / optional components Side panels Pre-filter Fresh air supply side panels (brushed stainless steel) pre-filter in F5 filter class for treatment of return air unit can be equipped with a mixing function for fresh air supplied by central-plant air handling unit 20 PR GB Subject to changes K0-10/2013

21 Components Valve assembly The valve assembly consists of a three-way mixing valve with an actuator, a circulation pump and a balancing valve. Measurements are taken by a dew-point sensor, an inlet air thermometer, a condensation sensor and a room thermostat (not included). Cooling coil pipes and fins are made of copper, the casing is made of stainless steel. coil is designed on the basis of parameters provided by the customer (e.g. temperature and humidity of outlet air and heat load). The design calculation of the coil is included in the documentation. coil is operated in condensation-free mode. If the valve assembly is included, this function is provided by the software of the unit s control module; if the valve assembly is not ordered, the measuring and control components must be provided by the customer. Air speed sensor speed sensor for outlet air equipped with a stainless steel bracket for mounting on a partition wall. Dwyer Photohelic manometer As standard, the pressure drop is controlled by a differential pressure switch and indicated on the control panel. This optional sensor can be replaced by a Dwyer Photohelic manometer with an upper limit control feature and an analogue display. Sound attenuator PVC curtains For additional reduction of sound level an attenuator can be optionally selected. To minimize turbulences the use of a soft wall (e.g. PVC curtains) is recommended along the borders of the laminar air flow field. PVC curtains are necessary to maximize the laminar air flow zone. Two configuratiuons of PVC curtains are available: PVC curtains, thickness 5 mm PVC strip curtains with antistatic finish, thickness = 2 mm, width = 200 mm PR GB Subject to changes K0-10/

22 Project Design Instruction Dimensions and tolerances Consider manufacturing and assembly tolerances when designing the dimensions of the FHM field (theoretical tolerance of 5 mm is recommended). The picture shows a sample unit connected to a suspended false ceiling (KS false ceiling profile) and R panel (the joint is covered by a R30-radius profile). joint The maximum size of the unit is limited by structural, manufacturing and transport options and is determined upon agreement between the manufacturer, designer and end user. Large-size fields include more components with emphasis placed on minimizing the effect of joints between different parts and ensuring uniform air flow (see the cross section). The casing is suspended on M8 threaded rods using suspension lugs located outside the unit (access to the outer sides of the unit must be provided). The rod is screwed into a riveting nut located on the suspension lug and secured by an M8 nut. To set a horizontal position we recommend using specially-provided anchors. The project designer determines the type of material used for anchoring the unit to the ceiling. For detailed instructions on mounting contact your relevant sales office. Space for valve assembly When designing FHM PowerU Cool and PowerS Cool units, ensure enough space for the valve assembly. Consult the manufacturer for the location of these components and the required piping. Several units (installed next to each other) can be supplied from a single valve assembly (each coil must have its own balancing valve). We recommend using special wall panels equipped with ducts for piping; the valve assembly can be mounted in a wallpanel compartment (access through an inspection door). 22 PR GB Subject to changes K0-10/2013

23 Project Design Instruction Switch box When designing FHM and FHM PowerU units consider the required access to the switch box mounted on the unit side (e.g. provide an inspection tile in the false ceiling make sure to avoid contact with other lines, pipework and components). Consult the distributor for the location. Schematic wiring diagram of FHM unit L N PE Protected Power Supply 230 VAC calibre 6A/type C Service board for lights longer than 2 m Power supply for LED lights Pressure loss HEPA filter 2x hose false ceiling level FHM laminar field display air speed sensor (opt.) Monitoring panel / LOGO text display max. 10 m photohelic (optional) Schematic wiring diagram of FHMP unit Protected Power Supply 230 VAC for fans calibre 10A/type C/ 1 fan L N PE L N PE Protected Power Supply 230 VAC for cooling cable 6A/type B L N PE for lights longer 2 m Power supply LED lights external board terminal board term. board cooling relay cooling Protected Power Supply 230 VAC calibre 6A/type C pre-filter 2 hoses HEPA filter 2 hoses communication power supply fans Cooling Servo heating-cooling Circulating water pump Sensors cool water thermometer inlet air thermometer (T213) dewpoint sensor (T213) sensor condensation Service board false ceiling level FHM laminar field Power module air flow sensor (opt.) display max 10m photohelic (optional) thermostat Panel height If a partition wall is connected to FHM, such panels should not project more than 30 mm into the bottom edge of the laminar module (due to risk of damage by contacting piping or by-pass). PR GB Subject to changes K0-10/

24 Unit Type Code Example: F H M x x x 5 5 S P U C 0 A FHM Product designation Total length L [cm] Width W [cm] Total outlet H [cm] Casing R Perforated 35%, painted RAL 9010 S L Stainless steel perforated 40%, electrochemically polished Single-layer fabric laminarizer Air supply V S O P From above (supplied by AHU) From side (supplied by AHU) Version for operating theatres Via Power fan module Air suction U S T D O Suction from bottom Suction from side Suction at floor level Suction at floor level, extended reach For operating theatres (attenuators + mixing) Coil Without coil C With water-based coil Valve assembly A With valve assembly and measurement and control 0 Without valve assembly Accessories (can be combined) 4 Stainless steel AISI316L A Sound attenuators B PVC strip curtains with antistatic finish, thickness = 2 mm, witdh = 200 mm F S Side panels PVC curtains, thickness = 5 mm Ordering codes indicate only the basic data of the product (type, dimensions and features). When placing an order it is necessary to specify a range of other parameters such as the filter class, mean air outlet speed, front panels, etc. 24 PR GB Subject to changes K0-10/2013

25 Tender specification units of units Standard components Casing from stainless steel Standard components 450 mm 550 mm Fan(s) Casing from stainless steel Suction from the front / side Fan(s) perforated suction grille: stainless steel or painted steel Standard components with alternatives Standard components with selection Filters Filters HEPA H13 HEPA H13 HEPA H14 HEPA H14 ULPA U15 ULPA U15 Outlets Outlets electrochemically polished stainless steel perforated electrochemically polished stainless steel perforated (40 % of clear area) (40 % of free area) steel perforated (40 % of clear area) RAL9010 painted steel perforated (40 % of clear area) RAL9010 painted single-layer polyester fabric laminarizer (aluminium frame + stainless steel edges) Air-supply source single-layer polyester fabric laminarizer (aluminium frame + stainless steel edges) Air-supply source central-plant air handling unit central-plant air handling unit recirculating-air module Control and measurement Control and measurement Switch box 300 (length) x 300 (height) x 150 (depth) [mm] Optional with: outputs to the central control panel Switch box 600 (length) x 300 (height) x 150 (depth) [mm] Optional with: outputs to the central control panel Monitoring panel Monitoring panel with additional pre-filter replacement indication air-flow speed alarm (too high/low) switchover between the day (nominal flow) and night (reduced flow) mode Optional components Optional components Side panels Side panels side face panels (brushed stainless steel) side face panels (brushed stainless steel) Lights Lights powerful light-emitting diode (LED) powerful light-emitting diode (LED) Coil casing made of stainless steel, copper pipes and fins casing of stainless steel, copper pipes and fins Air-flow speed sensor Coil Air-flow speed sensor outlet speed sensor with stainless steel bracket outlet speed sensor with stainless steel bracket Dwyer Photohelic manometer Dwyer Photohelic manometer with upper limit control feature and an analogue display with upper limit control feature and an analogue display Sound attenuator PVC curtains Sound attenuator PVC curtains standard, thickness = 5 mm standard, thickness = 5 mm strips with antistatic finish, 2 mm thick, 200 mm wide strips with antistatic finish, 2 mm thick, 200 mm wide Valve assembly for FHM Power U Cool and Power S Cool units PR GB Subject to changes K0-10/

26 Notes 26 PR GB Subject to changes K0-10/2013

27 Notes PR GB Subject to changes K0-10/

28 We live our values. Excellence Passion Integrity Responsibility GEA Group is a global engineering company with multi-billion euro sales and operations in more than process technology. GEA Group is listed in the STOXX Europe 600 Index.