Pendulum valve Series 16

HV gate valve Series 11

HV gate valve Series 11 Main applications General purpose valve for isolation in high vacuum systems Especially suited to pump isolation Ordering information Valve with manual actuator crank handle Ordering

UHV gate valve Series 10

UHV gate valve Series Main applications The standard valve for UHV isolation applications in research and industry Ordering information Valve with manual actuator crank handle Ordering numbers ISO-F metric

HV gate valve with protective ring Series 17

HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F

ANGLE/INLINE VALVE WITH SOFT-PUMP FUNCTION, SERIES 29.0/29.2

ANGL/INLIN VALV WITH SOFT-PUMP FUNCTION, SRIS 9.0/9. For pumping and venting of HV systems when few turbulences, particles, substrate movements and condensation are important. Resistant against differential

All-metal gate valve Series 48

ll-metal gate valve Series For extreme UHV and/or aggressive media Bakeable to 300 C in open and closed position Radiation resistant Maintenance-free up to 000 cycles Opening possible up to 1 bar differential

PENDULUM CONTROL VALVE, SERIES 65.0

Downstream pressure control and isolation valve for SEMI and FPD processes. Optimal for corrosive etching and cleaning processes. Virtually particle-free and shock-free operation Excellent pressure control

Pendulum valve control system Series 65

Pendulum valve control system Series 65 Series 65.0 Main applications Downstream pressure control and isolation valve for SEMI and FPD processes Optimal for corrosive etching and cleaning processes Ordering

All-metal angle valve Series 57

ll-metal angle valve Series 57 Main applications For vacuum processes with extreme UHV requirements and / or when using aggressive media Ordering information Valve with manual actuator hexagon head Valve

Agilent Aluminum Block Valves - Series 26 NW 16 - NW 40 ISO-KF Flange

gilent lock Valves - Series 26 - ISO-KF Flange ata sheet gilent Valves by Thank you for choosing gilent Valves by VT. With the combination of these two well-known names in the Vacuum industry, we are confident

Pendulum valve control system Series 65

Pendulum valve control system Series 65 Series 65.2 Main applications Downstream pressure control and isolation valve for SEMI and FPD processes Optimal for corrosive etching and cleaning processes Ordering

Gate valve control system Series 64

ate valve control system Series ontrol and isolation valve eneral purpose stainless steel valve daptive pressure control with stepper motor or throttling by adjustable 3-position pneumatic actuator ody

AGILENT VACUUM VALVEs

GILENT VCUUM valves 2-3 gilent Vacuum Valve Solutions 4-17 gilent High Performance Valves 18-21 Stainless Steel Tube Valves 22-23 Electromagnetic Block Valves 24 Variable Leak Valves gilent Vacuum Valve

AGILENT VACUUM VALVES

GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS

G = basic version A = with SPS H = with PFO C = with SPS and PFO. Ordering number example:

1 with extended control range Downstream pressure control and isolation valve Compact design Fast, virtually particlefree and shockfree operation Highperformance, integrated controller Low minimum controllable

Butterfly valve control system Series 61

utterfly valve control system Series 61 Series 61.2 Main applications Downstream pressure control valve for SEMI, FPD, PV, SOLAR and industrial processes Optimal for fast and demanding processes, e. g.

Product data sheet. Series 210, DN (2½ - 6 ) Ordering No PE

Series 210, DN 63 160 (2½ - 6 ) Ordering No. 210..-PE06-000. Manual actuator with hand lever Advantages Three sizes available: DN 63, 100, 160 with ISO-F flanges All vacuum parts made of stainless steel

Butterfly valve control system Series 61

utterfly valve control system Series 61 Downstream pressure control valve Very fast operation High-performance, integrated controller ody material aluminum or stainless steel Valve with integrated controller

Vacuum Gate Valves Product Introduction Vacuum gate valves are used primarily for the protection of high vacuum pumps but can also be used to 'valve-off' two connecting chambers. The next generation of

83000 All Aluminum Gate Valves

All Aluminum Gate Valves Table of Contents Introduction... Page 120... Page 121 Model Key Guide... Page 122 1.5" ID (DN40mm)... Page 123 2.0" ID (DN50mm)... Page 124 2.5" ID (DN63mm)... Page 125 3.0" ID

GateKeeper Aluminum Gate Valves

GateKeeper Aluminum Gate Valves 250 mm Air-Operated 100 mm Air-Operated 63 mm Air-Operated The GateKeeper Series Aluminum Gate Valves are economical, reliable vacuum shut-off devices designed and manufactured

PROCESS & AUTOMATED VALVES

Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline

Pendulum control & isolation valve with extended control range with Logic interface

Pendulum control & isolation valve with extended control range with Logic interface This manual is valid for the valve ordering number(s): 651.. -.. GC -.... (1 sensor input) 651.. -.. GE -.... (2 sensor

MTC Series. Double Acting and Spring Return Actuator and Accessories. MasterTorq. Pneumatic Actuators. Atex Class 2

Double Acting and Spring Return Actuator and Accessories MTC Series TM Pneumatic Actuators Atex Class Operations Double Acting A B A B By supplying air to Port A, pressure is applied to the center chamber

Optional Features and Accessories

Optional Features and ccessories Million Cycle Valves Vacuum Research Valves have been designed to eliminate sliding friction to extend operating life and reduce particle generation. For example, all of

QBV SERIES Butterfly Valves

QV SERIES utterfly Valves KEY HIGH VUUM PROUTS, IN.'s QV Series butterfly valves are designed and manufactured to offer reliable performance, be versatile and offer an economic benefit. These valves have

Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves

Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section Edition December 2011 Contents General The

Pneumatic Butterfly Valve Type 3335 / AT

Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN

Valve Solutions Series 150/160 and V-100 Valves

w w w. m k s i n s t. c o m Valve Solutions Series 1/160 and V- Valves High vacuum bellows sealed valves Features and enefits hoice of manual, pneumatic or electropneumatic actuation ngle and Inline body

C Series Pneumatic Rack & Pinion Rotary Actuators

Allied Flow Controls, Inc. C Series Pneumatic Rack & Pinion Rotary Actuators Spring Return & Double Acting Features and Benefits Torque Range at 0 Psig Air Pressure: Double Acting: -,00 lbf-in Spring Return:

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50

2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be

Installation, Operating & Maintenance Instructions. Series 081, DN (I.D. 2½" - 4") Hot surfaces; do not touch!

Vacuum Gate Valve This manual is valid for the valve ordering number(s): 08136-FA14/24/34/44 08138-FA14/24/34/44 08140-FA14/24/34/44 The fabrication number is indicated on each product as per the label

Pendulum control & isolation valve with extended control range with RS232 interface

Pendulum control & isolation valve with extended control range with RS232 interface This manual is valid for the valve ordering number(s): 651.. -.. GG -.... (1 sensor input) 651.. -.. GH -.... (2 sensor

3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information

3/2 - Way Valve 78 with metal actuator /2 up to /2 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, data sheet Type 78) ompact design

HV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC)

HV-Angle Valve (Series 264) HV-InlineValve (Series 265) with electromagnetic actuator single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 26... 26428 -K A 61 A..

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design

Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area

Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves

KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA

compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves

HV Gate Valve with pneumatic actuator

HV Gate Valve with pneumatic actuator This manual is valid for the valve ordering number(s): 09134-_E14/24/34/44 09136-_E14/24/34/44 09138-_E14/24/34/44 09140-_E14/24/34/44 09144-_E14/24/34/44 The fabrication

Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16

Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by

BVA300 Series Pneumatic Actuators for use with Spirax Sarco Ball Valves

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

UHV Angle valve (Series 284) with pneumatic actuator, single acting with closing spring (NC)

UHV Angle valve (Series 84) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 84 85 The fabrication number is indicated on each product

MT SERIES PNEUMATIC ROTARY ACTUATORS

MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design

High performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.

Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,

Angle Seat Valve /2" up to 3"

1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure

UT SERIES PNEUMATIC ROTARY ACTUATORS

UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design

Control Gate Valve with stepper motor actuator

Control Gate Valve with stepper motor actuator This manual is valid for the valve ordering numbers: 64036-.E52 and 64040-.E52 The respective product identification is given on each valve in the following

Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves

Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves 176.01.02 Excerpt from the Product Section C14 Edition July 2007 Contents General The

short name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum

with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/

WYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S

Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless

C14. Vacuum Valves. Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves.

176.01.02 Excerpt from the Product Section Edition May 2005 Vacuum Valves Manually Operated Electropneumatically Operated Electromagnetically Operated Special Valves Gate Valves vacuum Vacuum Valves Contents

HV Angle valve (Series 264) HV Inline valve (Series 265) with pneumatic actuator, single acting with closing spring (NC)

HV Angle valve (Series 64) HV Inline valve (Series 65) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 64 65 The fabrication number

ACM SERIES Pneumatic Actuators

ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased

aero 2 -IOM aero 2 ACTUATOR - INSTALLATION, OPERATION & MAINTENANCE MANUAL

Instruction DP00226 May 2015 IMPORTANT SAFETY WARNINGS A. Before carrying out any repair or maintenance on the actuator, make sure that the pressure supply lines and electrical connections have been safely

Specifications. Body Materials: Carbon steel, stainless steel, chrome-moly steel, other castable alloys

CONTROL VLVES KOSO HMMEL DHL B U L L E T I N V 5 0 / 5 0 - FETURES Globe bodies for in-line service; angle bodies for difficult service. Each body style accepts all standard trim sets. Balanced plugs for

3/2-way Solenoid Valve for pneumatics

656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511

Pendulum control & isolation valve with RS485 interface with valve cluster functionality

Pendulum control & isolation valve with RS485 interface with valve cluster functionality This manual is valid for the valve ordering number(s): 650.. -.. TJ -.... (Master / 1 sensor input) 650.. -.. TK

Type 21 True Union Ball Valves

PDF Published June 27, 218 Type 21 True Union Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking

Type 21 Ball Valves. features PTFE

PDF Published August 22, 217 Type 21 Ball Valves The Chemline Type 21 True Union Ball valve incorporates state of the art features for long term performance. This is a full port, full blocking True Union

CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations

CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount

Rectangular Door L-VAT with pneumatic actuator double acting

Rectangular Door L-VAT with pneumatic actuator double acting This manual is valid for the products: 0 7 5 1 0 U A 2 4 0 0 0 1 4 character option code Size 10... 46 x 236 12... 50 x 336 Actuator 24... without

Isolation Valves. 3.1 General Information. 3.2 N-Series Valves. 3.3 Poppet Valves. 3.4 Ball Valves. 3.5 Genesis Valves & Fittings 1

Section Three 3 3.1 General Information 3.2 N-Series 3.3 Poppet 3.4 all 3.5 Genesis & Fittings 1 3.6 Manual utterfly 3.7 Pendulum 3.8 Linear Gate 3.9 ellowless Poppet & Leak 2 3.10 Valve Heaters 2 3.11

PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging

PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.

Series 240 Type 3351 Pneumatic On/off Valve

Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating

Servo-operated 2/2-way solenoid valves Type EV220A

Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and

Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return

Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested

Mechanical Feedthroughs. Rotary Feedthroughs with Magnetofluid Sealing

Mechanical Feedthroughs Rotary Feedthroughs with Magnetofluid Sealing Contents Rotary Feedthroughs with Magnetofluid Sealing Introduction Page -3 to -4 SUPERSEAL Series Page -5 to -6 RMS Series Page -7

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

TYPE (BSA) SEALED VALVE BODY Series 2002 INSTALLATION, OPERATION AND MAINTENANCE MANUAL 1998-2013 by RF Valves, Inc. CUSTOMER SERVICE HOT-LINE 1-410-850-4404 Page 2 of 9 CONTENT 1.0 Introducing the airflex

2/2 way Coaxial valve CXRM compact, pilot operated Modular design

2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4

2/2 and 3/2-way ball valve with pneumatic rotary actuator

2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

Installation, Operating & Maintenance Instructions. UHV gate valve with pneumatic actuator. Series 108 DN mm (I. D. 2½ 8 )

Installation, Operating & Maintenance Instructions UHV gate valve with pneumatic actuator Series 108 DN 63 200 mm (I. D. 2½ 8 ) This manual is valid for the following product ordering numbers: 108.. -.

aero2 Pneumatic Actuator

The pneumatic rack & pinion actuator is manufactured using the latest materials and methods to provide dependable and smooth operation in demanding process control conditions. aero2 DESIGN FEATURES Hard

INSTALLATION INSTRUCTIONS 3-POSITION GATE VALVES SIZES Read All Instructions Prior To Installation

Read All Instructions Prior To Installation MODEL NUMBER: SERIAL NUMBER: UNPACKING Inspect shipping container before unpacking for damages sustained during transit. Any visible damage should be reported

UT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series

UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable

Compact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm

SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,

Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System

Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules

2/2 or 3/2 way ball valve with pneumatic rotary actuator

2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow

Ball Valves Pressures to 21,000 psi

Ball s s to 21,000 psi MAXIMATOR ball valves provide superior quality and performance with a variety of valve styles and process connections. All medium and high pressure connections are supplied with

Angle Seat Valve 7010

Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated

KEY FEATURES. Product Overview. Product Line Drawing

Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable

Type TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread

Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection

Angle Seat Valve 7010

Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly

Water Cooled Vacuum Valves, Gate and Poppet Style

Water Cooled Vacuum Valves, Gate and Poppet Style Port Sizes from 2 to 32 Inch, 63 to 800 mm ANSI, ISO, JIS, Conflat or Custom s Electric Motor or Electro-Pneumatic Actuator Available for DIV. 1, grp.

VALVES & AUTOMATION keside Group A member of the La VALVES & AUTOMATION keside Group A member of the La CSA APPROVED SHUTOFF VALVES

member of the Lake side Group N O UTOMTI VLVES & member of the Lake side Group D E V O R P P S E V S L C V F F O T SHU VLVES & UTOMTION member of the Lakeside Group Now Partnered with Habonim and its superior

Mini UHV gate valve with manual actuator with pneumatic actuator

Mini UHV gate valve with manual actuator with pneumatic actuator This manual is valid for the valve ordering numbers: 004/8/3/34-. E0/08 004/8/3/34-. E//3/4 004/8/3/34-. E//3/4 004/8/3/34-. E4/4/34/44

2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50

/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5

NAF-Setball ball sector valves DN , PN 10-40, ANSI Class Fk 41.51(15)GB 03.10

NAF-Setball ball sector valves DN -0, PN 0-, ANSI Class 0-0 Fk 4.()GB 03.0 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or metal-to-ptfe seating. The NAF-Setball combines

Installation, Operating & Maintenance Instructions. HV gate valve with pneumatic actuator. Series 110 DN mm (I. D.

Installation, Operating & Maintenance Instructions HV gate valve with pneumatic actuator Series 110 DN 250 320 mm (I. D. 10" 12") This manual is valid for the following product ordering numbers: 11048-.

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up

1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company

BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality

Valve Solutions for the Bulk Material Industry

Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical

PSG5xx ATM to Medium Vacuum Gauge

The INFICON Standard Gauges,,, PSG510- S and, employ the most advanced digital technology available in themarketplace. The rugged stainless steel sensor cell and compact design qualifythem for use on semiconductor

Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B

Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive

Vacuum Valves. Ball Valves. Angle Valves. In-line Valves. Special Valves. Gate Valves. Valve Accessories

Vacuum Valves Ball Valves Angle Valves In-line Valves Special Valves Gate Valves Valve Accessories Contents Introduction Page -3 Ball Valves 2-Way Ball Valves 3-Way Ball Valves Angle Valves Manual Pneumatic

FILTERS. PUMP CARE - Suction filters TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS. PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW

FILTERS HYDRAULIC DIVISION - Suction filters SD TECHNICAL DATA ORDERING AND OPTIONS CHART CLOGGING INDICATORS PRESSURE DROP ( p) CURVES CROSS FUNCTIONAL VIEW SPARE PARTS ORDERING INFORMATION DINSIONS OF

INSTALLATION and OPERATING INSTRUCTIONS

INSTALLATION and OPERATING INSTRUCTIONS UHV-LEAKVALVE ND 3 pneumatically operated NC, 2-positions cylinder. Valve F3CF1616-29 Valve F3CF3516-29 Valve F3VCR-29 Heating Cartridge HF3 Heater Controller HF3-S1

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

Installation, Operating & Maintenance Instructions. HV angle valve with pneumatic actuator single acting with closing spring (NC)

Installation, Operating & Maintenance Instructions HV angle valve with pneumatic actuator single acting with closing spring (NC) Series 264 DN 10 50 mm (I. D. ⅜" 2") HV inline valve with pneumatic actuator

FOR EVERY APPLICATION

FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical