City of Ottawa Street Lighting. HID Shoebox Style Luminaire

Size: px

Start display at page:

Download "City of Ottawa Street Lighting. HID Shoebox Style Luminaire"

Merilyn Nelson
5 years ago
Views:

1 TITLE: Engineering Specification RECOMMENDED: S. Edey NO: 1 REV: APPROVED: D. O Keefe. LLS0002 OF REV. DATE: City of Ottawa Street Lighting HID Shoebox Style Luminaire For City of Ottawa Use Only

2 REVISION SHEET REVISION DESCRIPTION DATE INITIAL 1 Add detailed drawings LBS csm/jb LLS0010, LLS0011, and LLS0012. Removed Figure 1 reference Text and Drawing 2 Title renamed General Conditions referenced in separate specification Electrical Characteristics referenced in separate specification Revised scope, light distribution & marking csm jb 3 Associated Standard Drawings identified (11.0) Revised Marking, (4.7.1) Added reference to electrical characteristics (4.13) 4 Approval and Recommended authorization changed jb se do For Hydro Ottawa Use Only LLS0002 Rev.4 Page 2 of 9

3 TABLE OF CONTENTS 1.0 GENERAL SCOPE REFERENCE STANDARDS APPROVAL OF SOURCE PHYSICAL CHARACTERISTICS MOUNTING ARRANGEMENT TERMINAL BLOCK AND GROUND LUG CONNECTION DIAGRAM REFLECTOR BALLAST, STARTER AND CAPACITORS LAMP SOCKET MARKING HOUSING GLASS LENS LIGHT DISTRIBUTION PATTERN COLOUR AND FINISHING TWIST LOCK RECEPTACLE ELECTRICAL CHARACTERISTICS INSPECTION PACKAGING AND SHIPPING WARRANTY INSTRUCTIONS TO BIDDERS GENERAL EXCEPTIONS MODIFICATIONS TECHNICAL INFORMATION REQUESTED SAMPLES MAINTENANCE PARTS INFORMATION SUPPLIED TO THE BIDDERS DRAWINGS... 9 For Hydro Ottawa Use Only LLS0002 Rev.4 Page 3 of 9

4 1.0 General 1.1 Scope This specification covers the supply of High Pressure Sodium and Metal Halide shoebox type luminaires complete with integral ballast and mounting bracket. This specification section shall be read in conjunction with engineering specification LGC0001 and LLS Reference Standards Luminaires shall comply with all applicable requirements in the latest issues of the following standards: ANSI/IES RP-8 Roadway Lighting ANSI Standard C Specifications for 70W S62 High Pressure Sodium Lamps ANSI Standard C Specifications for 100W S54 High Pressure Sodium Lamps ANSI Standard C Specifications for 150W S55 High Pressure Sodium Lamps ANSI Standard C82.9 Definitions for HID Lamp Ballasts and Transformers ANSI Standard C Lock-type Photocontrol Devices and Mating Receptacles Physical and Electrical Interchangeability and Testing ANSI Standard C Field Identification of High Intensity Discharge Lamps in Luminaires CSA Standard C22.2 No. 9 Luminaires CSA Standard C22.2 No. 43 Lampholders CSA Standard C22.2 No. 74 Equipment for use with Electric Discharge Lamps CSA Standard C22.2 No. 97 Outdoor and Submersible Floodlights CSA Standard C164 Hot Dip Galvanizing of Irregularly Shaped Articles CSA Standard C653 Performance Standards for Roadway Lighting Luminaires NEMA Standard OD Field Identification of High-Intensity Discharge Lamps in luminaires used in Roadway Lighting Equipment. 3.0 Approval Of Source Luminaires supplied to this specification shall be supplied only by manufacturers approved by the City of Ottawa or its agent. Only luminaires evaluated and approved by the City of Ottawa or its agent before or at the time a quotation is submitted will be accepted. Luminaires supplied shall be of the same construction as the sample luminaire currently approved by the City of Ottawa or its agent and, once approved, the supplier shall not change material, type or source or production method without prior approval of the City of Ottawa or its agent. 4.0 Physical Characteristics 4.1 Mounting Arrangement The luminaire and bracket shall be designed to mount on a round pole that has a minimum top diameter of 102 mm. The luminaire shall be horizontal when the bracket is mounted on a vertical surface. The bracket shall be capable of safely supporting the luminaire at a wind speed of 160 km/h. Refer to engineering specification LBS0001. For Hydro Ottawa Use Only LLS0002 Rev.4 Page 4 of 9

5 4.2 Terminal Block and Ground Lug A terminal block shall be provided and so placed that connection of No. 14 AWG solid copper supply wires to it will be convenient and easy to make without special tools. In addition, a ground lug shall be placed so that connection to it with a No. 14 AWG solid copper ground wire can be made easily without special tools. 4.3 Connection Diagram A connection diagram of a permanent material shall be located so as to be easily visible when making connections. 4.4 Reflector The reflector shall be made of polished, chemically brightened anodized aluminium not subject to distortion and shall be easily removable for servicing in the field without the use of special tools. 4.5 Ballast, Starter and Capacitors The ballast, starter and capacitors shall be mounted within the luminaire so that replacement may be achieved easily. Further, special precautions in the form of spacing and barriers shall be taken to shield the components from heat emitted by the lamp. Capacitors shall be non-pcb and permanently marked "Non-PCB". 4.6 Lamp Socket The standard lamp socket shall be a mogul screw base made from cold moulded porcelain and pulse rated for HPS and MH operation. The shell shall be nickel-plated with dimples or slots to prevent the lamp loosening with vibration and shall be secured to the socket using a machine screw and nut combination. The centre contact shall be nickel-plated and spring-loaded for positive contact. 4.7 Marking Each luminaire shall have an exterior identification marker affixed to the underside of the luminaire near the bracket that would be visible from the ground and indicate the size of lamp used in the luminaire. When an underside location is not appropriate, a selfadhesive label is to be supplied with the fixture and attached in the location as directed by the City of Ottawa Street Light agent Each luminaire shall have a permanent type nameplate indicating the manufacturer's name, catalogue/model number, wattage, supply voltage and frequency, input current and year of manufacture This nameplate may be a metallic nameplate attached to the luminaire with self-tapping crews or alternatively a high quality stick-on foil type label providing that the foil label is Installed at the place of manufacture under quality controlled conditions and will not fade, chip, peel or otherwise deteriorate under normal service conditions A permanent label including a wiring diagram and stating ballast type and compatible starter number and capacitor value shall be provided and attached to the ballast or interior of the luminaire so that it is clearly visible during maintenance operations. For Hydro Ottawa Use Only LLS0002 Rev.4 Page 5 of 9

6 4.8 Housing The luminaire housing shall be aluminium, designed and fabricated to minimize the ingress of moisture, insects and other foreign material. Suitable gaskets and filters shall be provided to minimize the accumulation of dirt on the lamp, reflector and glass lens. Removable covers shall be hinged so they hang freely in a vertical position to allow easy access to the lamp, socket, ballast, terminal block and ground connector for field servicing. In the closed position, all covers shall be secure and safe from damage due to vibration. Screw fastenings on doors are not preferred, but if used, screws must have Robertson type head. 4.9 Glass Lens The lens shall be flat tempered glass with high resistance to breakage from thermal shock and mechanical impact. The lens shall be easily removable for washing and maintenance, but fastened safely and securely to the door at all other times whether the door is open or closed Light Distribution Pattern Unless otherwise requested, luminaires shall be adjusted at the factory for the following light distribution patterns when used with the lamps indicated. Table 4.1 Luminaire Wattage (HPS) Factory Setting Luminaire Wattage (MH) Factory Setting 70 M-CO-II 250 M-CO-III 100 M-CO-II 400 M-CO-III 150 M-CO-II 200 M-CO-II 250 M-CO-III 400 M-CO-III 4.11 Colour and Finishing Except for the glass lens, all visible parts of the luminaire and bracket shall be finished to match as specified: White, Grey and Dark Bronze are acceptable colours. Paint shall be Epoxy Baked Enamel. Permanent anodizing to match is acceptable All finishes shall be applied in strict adherence to manufacturer's specifications Surfaces and edges shall be smooth and free from burrs and sharp corners Twist Lock Receptacle For Hydro Ottawa Use Only LLS0002 Rev.4 Page 6 of 9

7 The luminaire shall be equipped with a twist lock receptacle for a photoelectric controller. When installed, the photoelectric controller shall be adjustable for a north-facing window Electrical Characteristics Refer to LLS Inspection The City of Ottawa or its agent reserves the right to inspect the luminaires during manufacture for the purpose of ascertaining whether the units meet the requirements of this specification. 6.0 Packaging and Shipping Luminaires shall be shipped complete with hardware and bracket suitably packaged to ensure all parts are delivered as an entity. The supplier shall advise the City of Ottawa or its agent Purchasing Department three days prior to his shipping date of his intent to deliver. 7.0 Warranty The manufacturer shall warrant that the luminaires and brackets furnished by him conform to all the requirements and conditions of this specification. The Manufacture shall remedy, at no expense to the City of Ottawa or its agent, defects due to faulty workmanship, material or design for the period of one year after installation of the luminaires, but in no case for more than two years after receipt of the units by the City of Ottawa or its agent. 8.0 Instructions to Bidders 8.1 General Suppliers shall submit with their tenders the technical information requested herein. Suppliers who fail to provide the information requested might have their tenders rejected as incomplete. 8.2 Exceptions Where the tender is not in complete accordance with the requirements of this specification, the supplier shall submit a detailed list specifically outlining the exceptions or changes. If such a list is not provided, it will be understood that the supplier shall comply with all the requirements. 8.3 Modifications The supplier shall also submit a list of any changes in the design, components, construction or materials employed if the luminaires of the type being quoted differ from those previously approved by the City of Ottawa or its agent. Failure to notify the City of Ottawa or its agent of such changes when tendering may constitute sufficient reason to reject the tender. For Hydro Ottawa Use Only LLS0002 Rev.4 Page 7 of 9

8 8.4 Technical Information Requested Manufacturer's Reference a) Catalogue number of the luminaire b) Catalogue number and manufacturer of major components including ballast, starter, capacitor and refractor Photometric Performance a) Isocandela diagram b) Iso-lux (iso-foot candle) diagram and utilization data. c) Vertical candlepower distribution curve d) Luminaire maintenance factor (suggested by manufacturer) Mechanical Characteristics a) Dead weight b) Dimensions of luminaire, bracket and pole plate c) Effective projected area of luminaire and bracket combination d) Gasket/filter mechanisms for preventing dirt build-up on the lamp, reflector and glass lens e) The manufacturer shall so specify if he intends to make use of a flat prismatic glass lens to improve the photometric performance of the luminaire f) Types of finishes applied to various parts Electrical Characteristics and Performance (Rated Supply Voltage Assumed) a) Under open circuit condition, ballast input current and lamp voltage (OCV) b) Inrush current on striking of arc c) Normal or operating ballast input and lamp currents and maximum values of same d) Normal or operating ballast lamp voltage e) Variation in lamp wattage for rated supply voltage variation f) Ballast power factor g) Nominal ballast supply voltage h) Input watts and losses i) Rated life of ballast j) Ballast trapezoidal drawings Luminaire drawings and ballast schematic drawing Quality control program. Carried out by manufacturer including description of tests and sampling plan. 8.5 Samples Unless the luminaire being proposed has been previously approved by the City of Ottawa or its agent, the supplier shall provide a sample identical in every way to the units tendered. Samples will be returned to the supplier after evaluation. For Hydro Ottawa Use Only LLS0002 Rev.4 Page 8 of 9

9 9.0 Maintenance Parts Suppliers are requested to quote on the following maintenance parts or components: a) Ballast Kit including ballast, capacitor, starter, pre-wired with interconnecting wiring and mounting hardware as required by this specification b) Glass Lens, and c) Starter 10.0 Information Supplied To The Bidders The following minimum information will be supplied to the bidders when requesting a quotation: a) Quantity b) Lamp wattage c) Light distribution pattern, if other than as specified in Section 4.10 d) Input voltage of ballast, if other than as specified in specification LLS0005 e) Exterior colour of luminaire, if other than as specified in Section Drawings LLD0002, LLD0003, LLD0004, LLD0006, LLD0007, LLD0008. For Hydro Ottawa Use Only LLS0002 Rev.4 Page 9 of 9

CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES

ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 617 SEPTEMBER 1984 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ROADWAY LUMINAIRES 617.01 SCOPE 617.02 REFERENCES 617.05 MATERIALS TABLE OF CONTENTS