SMALL PROTECTIVE VENT

Transcription

1 Accessories (Optional Parts) PMF-6B SMALL PROTECTIVE VENT Small and screw-in protective vent suitable for compact, and hand-held type devices. IP6 protection class (water depth meters / 60 mins) and -40 C ~ +150 C operating temperature range allows it to be used in various environments. Suitable for enclosures with capacities of.0 litres or under. PMF-6B dimensions Filter O-ring Material Φ11. M6 0. Φ11. Φ5.5 M6 0. Please make a thread-hole for installation Recommended Torque 00ml / min (dp = 7 kpa) 0. ~ 0.4 N m IEC6059 (Protection class test) : IP66 IP67 IP6 IEC ,, 14 (Heat resistance test) : -40 C ~ +150 C IEC (Humidity test) : 5 C 5% humidity 1000 hours IEC (Vibration test) UL94V-0 (Flame-resistant) UL7C f1 Product no. Material Black Housing Filter O-ring Thread size Mount hole PMF-6B PA6 (Body) PA66 (Cap) PTFE Silicone M6 x 0. PMF-6B

2 Accessories (Optional parts) PMF-1 SERIES PROTECTIVE VENT Protective vents prevents the ingression of a variety of contaminants, such as water, dust and other particules while allowing water vapor molecules to diffuse through the microporous membrane. Equalize pressure and reduce condensation by allowing airflow into and out of sealed enclosures. With an IP6 protection class (water depth meters / 60 mins) and -40 C ~ +15 C operating temperature range, it can be used in harsh environmental conditions. PMF-1 dimensions For use without nut Φ14. Φ10.5 M1 1.5 Please make a thread-hole for installation if is more than 4.0mm. Φ For use with nut Mill either a Φ1. circular hole, or as per the following illustration. Φ14. Φ1. If used with a lock nut, should not exceed 4.0mm. Product no. PMF-1 PMF-1HA 450ml / min (dp = 70 mbar) 000ml / min (dp = 70 mbar) Water pressure 0.6 bar / 0 sec 0. bar / 0 sec Recommended torque (without nut) 0.6 ~ 0. N m IEC59, nd (Protection class test): IP66 IP67 IP6 IP69K IEC ,, 14 (Heat resistance test): - 40 C ~ +15 C IEC (Humidity test): 5 C 5% humidity 1000 hours UL94-V0 f1 (Flame-resistant) Product no. Material Nut Light gray Black Filter O-ring 4 Lock nut Thread size Mount hole SW PMF-1S PMF-1B PA6 F10% UL94V-0 PTFE Silicone PA6 UL94V- M1 1.5 Φ1. 17 PMF-1HAS PMF-1HAB PA6 F10% UL94V-0 PTFE Silicone PA6 UL94V- M1 1.5 Φ

3 Accessories (Optional Parts) PMF-1M STAINLESS STEEL PROTECTIVE VENT Stainless steel protective vent for superior durability and chemical resistance. IP6 protection class (water depth meters / 60 mins) and -40 C ~ +15 C operating temperature range allows it to be used in various environments. Suitable for enclosures with capacities of 0 litres or under. PMF-1M dimensions 1 Housing Filter For use without nut O-ring 4 Nut Material Φ0 M Φ14. Φ10.5 M1 1.5 Please make a thread-hole for installation if is more than 4.0mm While Φ1.mm through-hole is sufficient for installation, angle tapered hole is recommended to prevent deformation of the O-ring. If used with a lock nut, should not exceed 4.0mm. Recommended Torque 1600ml / min (dp = 7 kpa) 0.6 ~ 1. N m IEC6059 (Protection class test) : IP66 IP67 IP6 IP69K IEC ,, 14 (Heat resistance test) : -40 C ~ +15 C IEC (Humidity test) : 5 C 5% humidity 1000 hours IEC (Vibration test) Product no. Material Nut Metalic Housing Filter O-ring Nut Thread size Mount hole SW PMF-1M Stainless steel PTFE Silicone Brass Nickel plated M1 x 1.5 Φ1. 15 PMF-1M

4 Accessories (Optional parts) PMF- SERIES LARE PROTECTIVE VENT Maintaining high airflow for large enclosures in an outdoor environment. Equalize pressure and reduce condensation by allowing airflow into and out of sealed enclosures. Simple and flat design allows it to be used on a wide variety of enclosure types. IP6 protection class rated with an operating temperature range of -40 C ~ +15 C allows it to be used in harsh environments. Compliant with Solar industry testing IEC610 standards. For superior performance, installation on the side of the enclosure is recommended. PMF- Dimensions 1 Housing 4 Lock Lock Lock nut 4 nut 4 nut Filter Filter Filter O-ringO-ringO-ring If used with a lock nut, should not exceed 5.0mm. 16 ℓ / min (dp = 1 mbar) Water pressure 0. bar / 0 sec Recommended torque 5N m (without nut) IEC59, nd (Protection class test): IP66 IP67 IP6 IP69K IEC ,, 14 (Heat resistance test): - 40 C ~ +15 C IEC (Humidity test): 5 C 5% humidity 1000 hours IEC (Solar industry test): Freezing - high temperature test Hail impact test UL94-V0 f1 (Flame-resistant) Product no. PMF-S Material Filter O-ring 4 Lock nut Thread size Mount hole Nut SW PC PTFE Silicone PA6 M

5 VSC SERIES VSC ADHESIVE PROTECTIVE VENT FILTER Technical data Optional parts Water entry pressure 0.0kPa Typical airflow 450cc/cm² min at1.9kpa FEATURE Protective Vents reliably block ingress of wide range of contaminants, from rain and insects to dirt, dust, sand and other particulates, and enable water vapor molecules to diffuse through the microporous membrane, and pass freely out of the enclosure. Better to apply on a flat plastic and metal surface. NOTE Rest a few hours to achieve an initial bond. Please do not attach them onto a top-side of enclosures. If attaching onto the top-side, have rain fl uid on the fi lter and lose the ventilation effect. Please wipe out the surface and let dry thoroughly before attaching. Drawing Installation drawing [ Inner-side ] Adhesive layer Support layer Filter [ Outer-side ] Wall / Panel of Enclosure Filter effective diameter Outer diameter Components Ref. # Part name Material Color 1 Adhesive Acrylic adhesive Transparent Filter PTFE White Support Polyester fabric White Part no. / Dimensions Part no. Outer diameter () Filter effective diameter () Thickness (t) Sales unit VSC pcs VSC pcs VSC pcs VSC0S pcs (1 sheet) VSC10S pcs (1 sheet) VSC40S pcs (1 sheet) 9