Series 581. Silent Globe Check Valve CLA-VALTM SPECIFICATIONS
|
|
- Roy Newton
- 6 years ago
- Views:
Transcription
1
2 L-VLTM Series Silent Globe heck Valve Operates Horizontally or Vertically Watertight Seating Field Replaceable Parts Factory Mutual pproved Various Sizes Optional Resilient Seat SPEIFITIONS ll materials of construction shall conform to STM specifications as follows: Valve ody: isc & Seat: Spring: FM PPROVE The silent globe check valve shall consist of a heavy cast iron body, bronze seat, bronze disc, and stainless steel spring. The valve disc shall be center guided at both ends with an integral shaft and shall be spring loaded for silent operation. The spring shall be helical or conical and stone tumbled to achieve a micro-finish to resist mineral deposits. For ease of maintenance, the seat and disc shall be replaceable in the field. heck valve shall be capable of silent operation when installed in vertical or horizontal positions with either flow up or flow down. The flow area through the body shall be equal to or greater than the cross-section area of the equivalent pipe size. Sizes to 0 shall allow bolting a wafer style butterfly valve directly to the outlet flange without a spool piece. The valve shall be a la-val Series Silent Globe heck Valve. ast Iron STM lass ronze STM 8 STM. Stone Tumbled The la-val Series Silent Globe heck Valve has a springloaded poppet that allows the valve to close before flow reversal occurs, resulting in a silent, non-slam closure. It is a truly silent check valve. For ease of installation, the valve can be installed in vertical or horizontal positions with flow up or flow down. Silent Globe heck Valves are available in / to sizes, with either a lb. or 0 lb. pressure class rating. Silent Globe heck Valves in to 0 sizes have enough outlet clearance to allow them to be bolted directly to wafer style butterfly valves. onstructed of a cast iron body with bronze trim, the la-val Silent Globe heck Valve offers watertight shutoff with metal-tometal seating. For special applications, stainless steel trim and una-n resilient seats are available as options. ll materials conform to STM specifications, ensuring long lasting reliable performance. s a confirmation of la-val s commitment to quality, / to lb. class Series valves are Factory Mutual approved. Series Pressure Loss urve Pressure Loss PSI TEMP EG F. 0-0º 00º 0º TEST PRES. (Typical) Fluid Velocity / FPS PRESSURE / TEMPERTURE RTINGS WFER N GLOE STYLE SILENT HEK VLVES MXIMUM NON-SHOK WTER SERVIE PRESSURE GRY IRON UTILE IRON GRY IRON UTILE IRON L. LSS 0 L. LSS 0 L. LSS 00 L. LSS * * 70 0 * * Pressure Loss Ft. of Water 00 Sizes: / " to " * uctile Iron Recommended For Hot Water Service bove 00º F. TM L-VL
3 Optional Seating Metal to una-n SETE S E T OY IS LOSE INSERT UNSETE S E T IS OPEN OY Silent Globe heck Valve SERIES FLOW FM PPROVE UTTERFLY IS See Note FLNGE IMENSIONS ONFORM TO NSI STNRS. Model * FM pproved imensions (In Inches) Size / * * * * 8 * 0 * NSI LSS N 0 Weight Lbs / 7- / 8-/ 9-/ -/ -/ -/ -/ 7-/8 8-/ 0-/8 9-/ 0 -/8 -/ -/ -/ -/ Spool Piece is Needed etail No. Temp. Rating 0-0º F 00º F Test Pressure Name ody Seat Plug Spring ushing Screw **Optional Resilient Seat MXIMUM SERVIE PRESSURE NSI I. FLG. RTINGS L. LSS 0 L. LSS Material escription ast Iron STM, lass ronze STM 8** ronze STM 8 T0 STM. ronze STM 8 T0 STM NOTE: Sizes to 0 designed to allow bolting a wafer style butterfly valve directly to the outlet flange without a spool piece. P.O. ox Newport each, 99-0 Phone: Fax: claval@cla-val.com Website cla-val.com L-VL copyright la-val 00 Printed in US Specifications subject to change without notice. E- (R-7/0)
4 INSTLLTION / OPERTION / MINTENNE SERIES & SILENT HEK VLVES OPERTION: la-val Silent heck Valves operate automatically, to open... when pump flow starts and close silently...when pump flow stops. Series Globe Style heck Valve thru INSTLLTION: Silent heck Valves, Wafer and Globe style must be installed between flat faced iron or steel flanges per NSI. or wwa 07, utilizing a full faced gasket to bridge the joint between the seat O.. () and the body () flange face. In this manner a pressure seal at this joint is made (see Note ). Install the valve so that the nameplate data is plainly read and the flow arrow points in the flow direction. MINTENNE: la-val Silent heck Valves are ruggedly designed for years of trouble-free service. Therefore, regular maintenance is not required. However, during initial start-up period the following problems may surface (due to mis-application) that can be easily resolved:. No Flow thru Valve:. Observe that the flow arrow name plate, on the valve body, is pointing in the direction of flow.. heck that the down stream shut-off valve is full open.. Valve hatters:. onfirm that the flow velocity is a minimum /Sec. etail escription ody Seat* isc* Spring* ushing* Screw* * Recommended Spare Part Kit Material ast Iron ronze or SS ronze or SS (Optional una-n ) ronze ( & larger valves) Note : ll size and / valves have threaded seats in liev of screws. heck that there is a minimum of diameters of straight pipe installed up stream of the silent check valve.. Valve Leakage:. onfirm a full face gasket is installed per Note.
5 TO REMOVE VLVE FROM PIPELINE FOR INSPETION:. Shut off pump and pressure upstream and shut off isolation valve downstream to completely isolate check valve. skilled pipe fitter should be used for this work.. Lay valve to rest on its downstream side and remove cap screws as shown in Fig.. Note that " and -/" valves threaded seats in lieu of cap screws.. Grip seat spokes by hand to pull out seats or push down the disc and release quickly to allow force of the spring to pop out the seat.. With seat removed, check that all internal parts are freely removable from valve body.. Examine all parts for wear/damage and order replacement PRTS KITS as shown below. REMOVE P SREWS IS UP STREM SIE SET FLOW FIG. OWN STREM SIE UP STREM SIE etail escription ody Seat* isc* Spring* ushing* Screw* Material ast Iron ronze or SS ronze or SS (Optional una-n ) ronze ( & larger valves) Note : ll size and / valves have threaded seats in liev of screws * Recommended Spare Part Kit OWN STREM SIE Silent heck Valve Spare Part Kits Series Wafer Style Series Globe Style Model Size Kits Model Size Kits / 8 0 / Kit Includes etail ronze Seat & etail isc - Kit Includes etail Seat & etail isc -Kit Includes etail Seat, etail isc, etail Spring, & etail ronze ushing -Kit Includes etail Seat, etail isc, etail Spring, & etail ushing N-/ (R-/0)
6 TM TM la-val Product Identification How to Order Proper Identification For ordering repair kits, replacement parts, or for inquiries concerning valve operation it is important to properly identify la-val products already in service. Include all nameplate data with your inquiry. Pertinent product data includes valve function, size, material, pressure rating, end details, type of pilot controls used and control adjustment ranges. Identification Plates For product identification, cast in body markings are supplemented by identification plates as illustrated on this page. The plates, depending on type and size of product, are mounted in the most practical position. It is extremely important that these identification plates are not painted over, removed, or in any other way rendered illegible. INLET EINTRITT ENTREE ENTR T STOK OE MF. Y L-VL NEWPORT EH, LIF, U.S.. This brass plate appears on valves sized / " and larger and is located on the top of the inlet flange. INLET INLET These two brass plates appear on / 8", / ", and / " size valves and are located on the valve cover. RESERVOIR EN This brass plate appears on altitude valves only and is found on top of the outlet flange. T STOK FLOW MF. Y L-VL NEWPORT EH, LIF. U.S.. OE These two brass plates appear on " through " size screwed valves or " through " flanged valves. It is located on only one side of the valve body. SPRING RNGE T STOK T STOK OE MF. Y L-VL NEWPORT EH, LIF. U.S.. MF. Y L-VL NEWPORT EH, LIF. U.S.. This tag is affixed to the cover of the pilot control valve. The adjustment range appears in the spring range section. This brass plate is used to identify pilot control valves. The adjustment range is stamped into the plate. O NOT REMOVE THIS VLVE HS EEN MOIFIE SINE ORIGINL SHIPMENT FROM FTORY. WHEN ORERING PRTS N/ OR SERVIE SUPPLY T FROM THIS PLTE & LL OTHER PLTES ON ORIGINL VLVE. This aluminum plate is included in pilot system modification kits and is to be wired to the new pilot control system after installation. T. RP - REUE PRESSURE KFLOW PREVENTION EVIE STK. SER. L-VL NEWPORT EH,. This brass plate is on our backflow prevention assemblies. It is located on the side of the number two check (" through 0"). The serial number of the assembly is also stamped on the top of the inlet flange of the number one check.
7 HOW TO ORER There are many valves and controls manufactured by la-val that are not listed due to the sheer volume. For information not listed, please contact your local la-val office or our factory office located at: P. O. ox Newport each, alifornia 99-0 (99) FX (99) 8- SPEIFY WHEN ORERING Model Number Valve Size Globe or ngle Pattern Screwed or Flanged djustment Range ody and Trim Materials (s pplicable) Optional Features Pressure lass UNLESS OTHERWISE SPEIFIE Globe or angle pattern are the same price uctile iron body and bronze trim are standard X Flow lean Strainer or X Y Strainer are included K Isolation Valves are included in price on and larger valve sizes ( and larger on 00 Series) LIMITE WRRNTY utomatic valves and controls as manufactured by la-val are warranted for three years from date of shipment against manufacturing defects in material and workmanship which develop in the service for which they are designed, provided the products are installed and used in accordance with all applicable instructions and limitations issued by la-val. We will repair or replace defective material, free of charge, which is returned to our factory, transportation charges prepaid, provided that, after inspection, the material is found to have been defective at time of shipment. This warranty is expressly conditioned on the purchaser s giving la-val immediate written notice upon discovery of the defect. omponents used by la-val but manufactured by others, are warranted only to the extent of that manufacturer s guarantee. This warranty shall not apply if the product has been altered or repaired by others, and la-val shall make no allowance or credit for such repairs or alterations unless authorized in writing by la-val. ISLIMER OF WRRNTIES N LIMITTIONS OF LIILITY The foregoing warranty is exclusive and in lieu of all other warranties and representations, whether expressed, implied, oral or written, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. ll such other warranties and representations are hereby cancelled. la-val shall not be liable for any incidental or consequential loss, damage or expense arising directly or indirectly from the use of the product. la-val shall not be liable for any damages or charges for labor or expense in making repairs or adjustments to the product. la-val shall not be liable for any damages or charges sustained in the adaptation or use of its engineering data and services. No representative of la-val may change any of the foregoing or assume any additional liability or responsibility in connection with the product. The liability of la-val is limited to material replacements F.O.. Newport each, alifornia. TERMS OF SLE EPTNE OF ORERS ll orders are subject to acceptance by our main office at Newport each, alifornia. REIT TERMS redit terms are net thirty (0) days from date of invoice. PURHSE ORER FORMS Orders submitted on customer s own purchase order forms will be accepted only with the express understanding that no statements, clauses, or conditions contained in said order form will be binding on the Seller if they in any way modify the Seller s own terms and conditions of sales. PROUT HNGES The right is reserved to make changes in pattern, design or materials when deemed necessary, without prior notice. PRIES ll prices are F.O.. Newport each, alifornia unless expressly stated otherwise on our acknowledgement of the order. Prices are subject to change without notice. The prices at which any order is accepted are subject to adjustment to the Seller s price in effect at the time of shipment. Prices do not include sales, excise, municipal, state or any other Government taxes. Minimum order charge $7.00. RESPONSIILITY We will not be responsible for delays resulting from strikes, accidents, negligence of carriers, or other causes beyond our control. lso, we will not be liable for any unauthorized product alterations or charges accruing there from. RISK ll goods are shipped at the risk of the purchaser after they have been delivered by us to the carrier. laims for error, shortages, etc., must be made upon receipt of goods. EXPORT SHIPMENTS Export shipments are subject to an additional charge for export packing. RETURNE GOOS. ustomers must obtain written approval from la-val prior to returning any material.. la-val reserves the right to refuse the return of any products.. Products more than six () months old cannot be returned for credit.. Specially produced, non-standard models cannot be returned for credit.. Rubber goods such as diaphragms, discs, o-rings, etc., cannot be returned for credit, unless as part of an unopened vacuum sealed repair kit which is less than six months old.. Goods authorized for return are subject to a % ($7 minimum) restocking charge and a service charge for inspection, reconditioning, replacement of rubber parts, retesting, repainting and repackaging as required. 7. uthorized returned goods must be packaged and shipped prepaid to la-val, 70 Placentia venue, osta Mesa, alifornia 97. E-Product I.. (R-/0) TM L-VL PO ox Newport each 99-0 Phone: Fax: L-VL N 87 hristie rive eamsville, Ontario anada LOR Phone: Fax: 'OPYRIGHT L-VL 00 Printed in US Specifications subject to change without notice. L-VL EUROPE hemin des Mésanges H-0 Romanel/ Lausanne, Switzerland Phone: ---- Fax: Represented y:
4 - Way Control 4 - Way Control 4 - Way Control with lock
100-02 INSTALLATION / OPERATION / MAINTENANCE DESCRIPTION MODEL 100-02 (Full Internal Port) Powertrol Valve This manual contains information for installation, operation and maintenance of the Cla-Val Co.
More informationSeries Roll Seal
790-63 INSTALLATION / OPERATION / MAINTENANCE SERIES 00-4 700 Series Roll Seal DESCRIPTION The Cla-Val Model 00-4 Roll Seal valve is a hydraulically operated valve used to control liquid flow by means
More informationWafer and Globe Style Silent Check Valve. Operation, Maintenance and Installation Manual
Manual No. SCV-OM1-4 Wafer and Globe Style Silent Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2
More informationBooster Pump Control Valve
MODEL 60-7 (Full Internal Port) 660-7 (Reduced Internal Port) ooster Pump Control Valve Simple Hydraulic Operation Low Head Loss Horizontal or Vertical Mounting uilt-in Check Valve Proven Reliable Design
More informationCheck Valve MODEL. Schematic Diagram. Product Dimensions Data:
Check Valve Simple Proven Design No-Slam Operation Drip-Tight Shut-Off No Packing Glands or Stuffing Boxes Easy to Install & Maintain 8-0 (Full Internal Port) MODEL 68-0 (Reduced Internal Port) The Cla-Val
More informationilent Silent Operation Proven Performance Cost Effective Silent Check Valves Check Valve
ulletin / Silent Operation Proven Performance Cost Effective ilent Check Silent Check s www.valmatic.com Certified Lead-Free NSF/NSI & 7 Certified Feature Highlights Threaded C F C Globe F C E Wafer F
More information2-12 Grooved End Dual Disc Check Valve. Operation, Maintenance and Installation Manual
Manual No. DDCV-OM4-1 2-12 Grooved End Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2
More informationSS Hytrol Valve MODEL. Principle of Operation
590-01 MODEL 100-44 (Reduced Internal Port) 316SS Hytrol Valve All 316 Stainless Steel Reduced Cavitation Design Drip-Tight, Positive Sealing Action Service Without Removal From Line Every Valve Factory
More information14 and Larger Wafer and Lug Style Dual Disc Check Valve. Operation, Maintenance and Installation Manual
Manual No. DDCV-OM2-2 14 and Larger Wafer and Lug Style Dual Disc Check Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...
More informationGA Industries, LLC 9025 Marshall Road Cranberry Township, PA USA Telephone (724) Fax (724)
INSTALLATION, OPERATION AND MAINTENANCE MANUAL LUDLOW SERIES FIGURE 350-W 3 to 30 Lever & Weight Air-Cushioned Swing Check Valves TABLE OF CONTENTS Introduction. 1 Description of Operation... 1 Receiving
More informationBULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More informationLoading. Inlet ROLL SEAL. Outlet
750-0 Outlet Inlet Loading ROLL SEAL MODEL Compact Design, Proven Reliable Light Weight Materials High Pressure Rating Availability Easy Installation and Maintenance 00-4 700 SERIES ROLL SEAL The Cla-Val
More informationSOLENOID CONTROL VALVE
PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationPRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
More informationHIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
More informationPRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More informationTITAN FLOW CONTROL, INC.
PREFACE: TITAN FLOW This manual contains information concerning the installation, operation, and maintenance of Titan Flow Control (Titan FCI)Full Body Swing Check Valves. To ensure efficient and safe
More informationLevel Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
More informationKennedy Valve. A Division of McWane, Inc. AWWA PRODUCTS
Kennedy Valve A Division of McWane, Inc. AWWA PRODUCTS 1021 East Water Street Elmira, NY 14902 Phone: (607)734-2211 Fax: (607)734-3288 Fax: (800)952-4771 E-Mail: sales@kennedyvalve.com www.kennedyvalve.com
More informationPVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables
PVI 1800/PVI 2500 WARRANTY MANUAL Residential/Commercial Grid-Tied Photovoltaic Inverter 2009, Solectria Renewables Subject to Change REV 10.09 1 Product Warranty & RMA Policy 1.1 Warranty Policy The Solectria
More informationPRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
More informationHIGH VELOCITY WATER SPRAY NOZZLE (BRASS)
HIGH VELOCITY WATER SPRAY NOZZLE (BRASS) TECHNICAL DATA MODEL MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE END CONNECTION MATERIAL DESCRIPTION HV-AS with strainer 12 Bar (175 PSI) 3.5 Bar to 10.5
More informationINTRODUCTION INSTALLATION
INTRODUCTION INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS This instruction manual includes installation, operation and maintenance information for the figure G73 gear operator. The figure G73 is
More informationFLOAT CONTROL VALVES
PROJECT NAME LOCATION FLOAT CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 8 in. (200 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard
More informationMAX NON-SHOCK WORKING PSI TEMPERATURE PSI 150 F F 190. A (in) B (in) C (in) D (in) E (in) Cv*
OY ST IRON L. SET STINLESS T04 PLUG STINLESS T04 4 SPRING STINLESS T04 SREW STINLESS T04 SEE THE VNE FLEX T MX NON-SHOK TEMPERTURE PSI 50 F 00 00 F 90 LE FREE to avoid flow turbulence. The intake side
More informationSpecialty Products. Strainers. Check Valves. Butterfly Valves
Specialty Products Strainers Check Valves Butterfly Valves Effective Date: April 1, 2013 Trademarks: Viton is a trademark of DuPont Performance Elastomers, L.L.C. Teflon is a trademark of E. I du Pont
More informationAMES 2016 Price List. Backflow Prevention Products and Repair Kits and Parts. Effective February 29, 2016
AMES 2016 Price List Backflow Prevention Products and Repair Kits and Parts Effective February 29, 2016 All prices supersede previous issues, are temporary and subject to change without notice. AmesFireWater.com
More informationPrice List. Backfl ow Prevention Products, Repair Kits, and Parts. Effective July 2, AmesFireWater.com 2018 AMES FIRE & WATERWORKS PRICE LIST
2018 AMES FIRE & WATERWORKS PRICE LIST Price List Backfl ow Prevention Products, Repair Kits, and Parts Effective July 2, 2018 All prices supersede previous issues, are temporary and subject to change
More informationMEDIUM VELOCITY WATER SPRAY NOZZLE
MEDIUM VELOCITY WATER SPRAY NOZZLE HD FIRE PROTECT TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are
More informationPVI 60KW, PVI 82KW, PVI 95KW
PVI 60KW PVI 82KW PVI 95KW WARRANTY MANUAL Commercial, Grid-Tied Photovoltaic Inverters 2008, Solectria Renewables LLC Subject to Change DOC-020099 rev 024 1 1 Product Warranty & RMA Policy Warranty Policy
More informationSeries 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
More informationPrice List. Specialty Products / Strainers / Check Valves / Butterfly Valves. Effective July 2, MuellerSteam.com 2018 MUELLER PRICE LIST
2018 MUELLER PRICE LIST Price List Specialty Products / Strainers / Check Valves / Butterfly Valves Effective July 2, 2018 All prices supersede previous issues, are temporary and subject to change without
More informationPRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)
Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves
More informationWater Wastewater Air Valves Check Valves
Water Wastewater ir s Check s Water ir s ir Release ir and Vacuum Combination Vacuum reaker Check s Silent Check Swing Check Two-Door Check Foot Flex Check Wastewater & Sewage ir s ir Release ir and Vacuum
More information81-01/ Check Valve
8-0 MODEL INSTALLATION / OPERATION / MAINTENANCE 8-0/68-0 Check Valve INTRODUCTION The Cla-Val Model 8-0/68-0 Check Valve is an automatic valve designed to close drip tight when outlet pressure exceeds
More informationVal-Matic 4-20 Air/Vacuum Valve
Manual No. A/VV-OM2-4 Val-Matic 4-20 Air/Vacuum Valve Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION... 2 VALVE CONSTRUCTION...
More informationVal-Matic 1/2-3 Well Service Air Valve With Dual Port Throttling Device
Manual No. WSAV-OM1-2 Val-Matic 1/2-3 Well Service Air Valve With Dual Port Throttling Device Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF
More information90G-21 90A-21 Fire Protection Pressure Reducing Valve
90-21 TM Fire Products TM MODELS 90G-21 90A-21 Fire Protection Pressure Reducing Valve 90-21 Listed Fire Protection Valve 90-21 Listed Grooved End Fire Protection Valve U.L. Listed, C Listed, MEA Approved
More informationWARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN
WARRANTY POLICY Revision D 2014, Solectria Renewables, LLC DOCIN-070360 1 Product Warranty & RMA Policy 1. Warranty Policy Warranty Registration: It is important to have updated information about the inverter
More informationModel 585 Swing Check Valve
INSTALLATION / OPERATION / MAINTENANCE Model 585 Swing Check Valve Swing Check Valve with Lever and Spring, Lever and Weight, and/or Side Mounted Air Cushion INTRODUCTION RECEIVING AND STORAGE VALVE CONSTRUC
More informationSeries PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
More informationAPCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES
APCO CRF-100A RUBBER FLAPPER SWING CHECK VALVES Instruction D12043 June 2016 DeZURIK Instructions These instructions provide installation, operation and maintenance information for APCO CRF-100A Rubber
More informationFTV-S (Straight) & FTV-A (Angle Body) Tri-Service Valve
VLVES & ESSORIES FTV-S (Straight) & FTV- (ngle ody) SERVIE REOMMENDTIONS: The Model FTV-S & FTV- is primarily designed for installation in pump discharge piping where it functions as a spring loaded silent
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2015 Supersedes BIV-06-11 CLASS 125 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule January 1, 2018 Supersedes BIV-06-15 Brass, Bronze, Iron and Stainless Steel Valves 07 BRONZE GATE VALVES CLASS 125 ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationMODULATING FLOAT CONTROL VALVE
PROJECT NAME LOCATION MODULATING FLOAT CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
More information0-0/0-0 Description The CIa-VaI Model 00-0 Hytrol Valve is a main valve for CIa-VaI Automatic Control Valves. It is a hydraulically operated, diaphragm-actuated, globe or angle pattern valve. This
More informationPIPE FITTING ACCESSORIES EFFECTIVE FEBRUARY 5, 2018
CANADIAN IMPORT PRICE LIST PIPE FITTING EFFECTIVE FEBRUARY 5, 2018 version: EFFECTIVE: FEBRUARY 5, 2018 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax: (951)
More informationWastewater Air Release Valve Models 48A, 49A
Manual No. WWAR-OM1-2 Wastewater Air Release Valve Models 48A, 49A Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...
More informationAVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12"
AMERICAN AVK COMPANY AVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12" TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationHR-20P Pneumatically Controlled Pressure Regulator
HR-20P Pneumatically Controlled Pressure Regulator Instruction and Service Manual Hydroplex Corporation 230 West Gloria Switch Rd. Lafayette, LA 70507 337-233-0626 www.hydroplexpumps.com I. General Instructions
More informationTITAN FLOW CONTROL, INC.
PREFACE: This manual contains information concerning the installation, operation, and maintenance of Titan Flow Control (Titan FCI) Wafer Style, Dual Plate Check Valves. To ensure efficient and safe operation
More informationJET METER INSTRUCTIONS
UNPACKING Please open and inspect your package upon receipt. Your package was packed with great care and all the necessary packing materials to arrive to you undamaged. If you do find an item that is broken
More informationGP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
More informationVal-Matic 1-4 Combination Air Valve (Single Housing Type)
Manual No. ARCO-OM1-2 Val-Matic 1-4 Combination Air Valve (Single Housing Type) Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1
More informationSERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
More informationWastewater Combination Air Valve. Operation, Maintenance and Installation Manual
Manual No. WCAV-OM1-1 Wastewater Combination Air Valve Operation, Maintenance and Installation Manual INTRODUCTION... 2 RECEIVING AND STORAGE... 2 DESCRIPTION OF OPERATION... 2 INSTALLATION... 3 VALVE
More informationAVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12"
AMERICAN AVK COMPANY AVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12" TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
More informationVal-Matic 1-4 Combination Air Valve (Single Housing Type)
Manual No. ARCO-OM1-3 Val-Matic 1-4 Combination Air Valve (Single Housing Type) Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1
More informationAMES 2013 Price List. Backflow Prevention Products. Effective April 1, 2013
PL-AMES_Keyedprices_PL-AMES_Tagged 3/6/13 2:21 PM Page 1 Includes Our LEAD FREE * Product Offering. Traditional products are still available while supplies last. Call your local rep. AMES 2013 Price List
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More information½"-3" Air/Vacuum Valve Models 100S to 103S
Manual No. A/VV-OM1-4 ½"-3" Air/Vacuum Valve Models 100S to 103S Operation, Maintenance and Installation Manual INTRODUCTION... 1 RECEIVING AND STORAGE... 1 DESCRIPTION OF OPERATION... 1 INSTALLATION...
More informationPIPE FITTING ACCESSORIES EFFECTIVE JANUARY 14, 2019
IMPORT PRICE LIST PIPE FITTING EFFECTIVE JANUARY 14, 2019 version: IMP-ACC-UPL.19.01 EFFECTIVE: JANUARY 14, 2019 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax:
More informationBooster Pump Control Valve
MODEL 60-7 660-7 ooster Pump Control Valve Simple Hydraulic Operation Low Head Loss Horizontal or Vertical Mounting uilt-in Check Valve Proven Reliable Design The Cla-Val Model 60-7/660-7 ooster Pump Control
More informationSwing-Flex Check Valve
Manual No. SFCV-OM1-11 Swing-Flex Check Valve Operation, Maintenance and Installation Manual INTRODUCTION 1 RECEIVING AND STORAGE 1 DESCRIPTION OF OPERATION 1 INSTALLATION 2 VALVE CONSTRUCTION 2 MAINTENANCE
More informationAIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
More informationDI-ACRO #36 FINGER BRAKE INSTRUCTION MANUAL
DI-ACRO #36 FINGER BRAKE INSTRUCTION MANUAL REV. D 9/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. ANGLE ADJUSTMENT PG. 4 C. #36 FINGER BRAKE BREAKDOWN AND PARTS LIST PG. 5-7 D. MICROMETER BACK
More informationMEDIUM VELOCITY WATER SPRAY NOZZLE
MEDIUM VELOCITY WATER SPRAY NOZZLE TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are without strainer
More informationDI-ACRO #24 FINGER BRAKE INSTRUCTION MANUAL
DI-ACRO #24 FINGER BRAKE INSTRUCTION MANUAL REV. F 6/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. MAINTENANCE PG. 3 C. ANGLE ADJUSTMENT PG. 4 D. NO. 24 FINGER BRAKE PARTS LIST PG. 5-6-7 E. MICROMETER
More informationFloat Level Control Kits
Float Level Control Kits ASOFK, SPFK and FLC SpectraPure Inc. assumes no responsibility for water damage due to leaks. It is the user s responsibility to determine that the system is leak-free. INSTALLATION
More informationSERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
More informationPENBERTHY MODELS GL AND GH GAS OPERATED JET PUMPS INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Before installation, these instructions must be read carefully and understood. PRODUCT WARRANTY Emerson warrants its Penberthy products as designed and manufactured to be free of defects in the material
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D SWING CHECK VALVES Pressure Class: ASME 150-2500 Size Range: 2-36 CATALOG NUMBER SC-1001 G W C V A L V E I N T
More informationHand Expansion Valves Built Stronger to Last Longer Sizes: 6mm (¼ ) to 305mm (4 )
Hand Expansion Valves Built Stronger to Last Longer Sizes: 6mm (¼ ) to 305mm (4 ) Bulletin No. 82-00A Suitable For: Ammonia, Fluorocarbons, Nitrogen and Carbon Dioxide Features ASTM 352 LCB Cast Steel
More informationStainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to
ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll
More informationCUSTOM COMBINATION AIR VALVE
INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.
More information50B-5KG. Pump Suction Control Valve MODEL. Specifications. Typical Installation. Adjustable Opening Speed For Pump Suction Protection
0B-KG MODEL 0B-KG Pump Suction Control Valve Adjustable Opening Speed For Pump Suction Protection Pilot Control Provides Wide Flow Range With Minimal Pressure Variations Controlled Closing For System
More informationBourdon Tube Pressure Gauge
6720 Best Friend Road Norcross, GA 30071 Phone: (770) 409-3280 Fax: (770) 409-3290 Bourdon Tube Pressure Gauge Applications Fire sprinkler systems Suitable for all media that will not obstruct the pressure
More informationTYPE S RELAY VALVE (Volume booster) Service Manual
TYPE S RELAY VALVE (Volume booster) Service Manual The Type "S" Relay Valve is a pilot operated, 3-way, pneumatic pressure control valve with open exhaust. This large capacity valve receives pressure signals
More informationModel GP Triplex Ceramic Plunger Pump Operating Instructions/ Manual
Model GP6145-3100 Triplex Ceramic Plunger Pump Operating Instructions/ Manual Contents: Installation Instructions: page 2 Pump Specifications: page 3 Exploded View: page 4 Parts List / Kits: page 5 Repair
More informationCla-Val. Service Training Manual. Simple solutions plus learning with a purpose
Cla-Val Service Training Manual Simple solutions plus learning with a purpose 5 Application Series Section General Identify What Valve You Have 5-1 Rate of Flow 40 Series 5-2 Pressure Relief 50 Series
More informationSwing-Flex Check Valve
Manual No. SFCV-OM1-14 Swing-Flex Check Valve Operation, Maintenance and Installation Manual INTRODUCTION.. 1 RECEIVING AND STORAGE. 1 DESCRIPTION OF OPERATION.. 1 INSTALLATION 2 VALVE CONSTRUCTION.. 2
More informationHSIV PLOW OPERATOR S MANUAL
PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com JANUARY 2015 THE INFORMATION CONTAINED IN
More informationSERIES V. High Performance Segmented Ball Valve
SERIES V High Performance Segmented Ball Valve Publication SV000-101 Issue 02/17 Rev. D General Information High Rangeability: 300:1 Turn down ratio Flow Characteristic: Equal Percentage Low Pressure Recovery
More informationINLINE FOAM INDUCTOR HD FIRE PROTECT PVT. LTD. TECHNICAL DATA DESCRIPTION SPECIFICATION APPLICATION SYSTEM DESIGN DETAILS
INLINE FOAM INDUCTOR HD FIRE PROTECT PVT. LTD. TECHNICAL DATA MODEL OPERATING PRESSURE IG - Bronze material IS - Stainless Steel material 6.5 to 12 BAR (93-175 PSI) FACTORY 25 BAR (365 PSI) HYDROSTATIC
More informationAPCO CSV-1600 SURGE CHECK VALVE
APCO CSV-1600 SURGE CHECK VALVE Instruction D12022 January 2013 Instructions These instructions provide installation, operation and maintenance information for APCO CSV-1600 Surge Check Valves. They are
More informationDeZURIK 2 20" BOS BUTTERFLY VALVES
2 20" BOS BUTTERFLY VALVES Instruction D10459 October 2013 2-20 BOS Butterfly Valves Instructions These instructions provide information about BOS Butterfly Valves. They are for use by personnel who are
More information2V1-3V1 SERIES SOLENOID VALVE
2V1-3V1 SERIES SOLENOID VALVE Valve Model 2V1 3V1 Port & Mounting Body Ported, Stacking Action & Motion Solenoid, Direct Acting, 2 Way Response Time
More information50-01 (Full Internal Port) (Reduced Internal Port) Pressure Relief. & Pressure Sustaining Valve MODEL
50-01 650-01 & 1 Hytrol (Main ) 2 X42N-2 Strainer & Needle 3 CRL Control Accurate Pressure Control Optional Check Feature Fast Opening to Maintain Line Pressure Slow Closing to Prevents s Completely Automatic
More information3V SERIES SOLENOID VALVE
3V110-410 SERIES SOLENOID VALVE Valve Model 3V110-1/8 3V210-1/4 3V310-3/8 3V410-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Air Pilot, Spool Design, Response Time
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationAPCO ASR-400/450 SEWAGE AIR RELEASE VALVES
APCO ASR-400/450 SEWAGE AIR RELEASE VALVES Instruction D12005 December 2012 Instructions These instructions provide installation, operation and maintenance information for the APCO ASR- 400/450 Sewage
More informationMODEL CB800 Circuit Balancing Valves
MOEL 00 ircuit alancing Valves VLVES & ESSORIES Model 00 ircuit alancing Valves are designed to achieve accurate and efficient balancing of hydronic heating or cooling systems. ircuit alancing Valves provide
More informationINSTALLATION AND MAINTENANCE INSTRUCTIONS 3-WAY SOLENOID VALVES, NORMALLY OPEN NORMALLY CLOSED AND UNIVERSAL CONSTRUCTION
134-05 DESCRIPTION Bulletin 8320 is a small 3-way solenoid operated valve with all three pipe connections located in the body. The bodies are of brass or stainless steel construction. Standard valves
More informationModel 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS
Model 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS INSTALLATION INSTRUCTIONS UNIVERSAL VALVE COMPANY, INC. 478 SCHILLER ST. ELIZABETH, NJ 07206 Rev A
More informationInstallation Service Repair Kits Maintenance RP/IS-774/774DCDA/774X/774XDCDA
Series 774/774DCDA 774X/774XDCDA Double Check Backflow Preventer Double Check Detector Assemblies Sizes: 2 1 2 " - 12" (65-300mm) 774 4" - 12" (100-300mm) 774DCDA 6" - 8" (150-200mm) 774X/774X DCDA Installation
More information