SIM RIG GT. Product Manual
|
|
- Randolph Horn
- 6 years ago
- Views:
Transcription
1 SIM RIG GT Product Manual
2 Introduction Thank you for purchasing the Heusinkveld Engineering Sim Rig GT! This is a compact, clean, adjustable and very stiff simulator frame for a GT-style simracing experience. Please take your time to read this manual to make sure your cockpit is put together as solid as we intended it to be. The main features of the frame are: Extremely stiff construction with almost no flex and wobble. GT low seating position for drivers between 1.5 and 2 meter (5ft to 6ft 6in). Fits Fanatec CSW V2, SimSteering (Kollmorgen AKM ), Accuforce, OSW Lenze MSC12-series and OSW Mige 130-series motors. Fits Heusinkveld Engineering Sim Pedals Pro and Sim Pedals Ultimate. Adjustable heel support. Fits Heusinkveld Engineering Sim Shifter Sequential. Fits Heusinkveld Engineering Sim Handbrake. Fits most side mount racing seats up to 435mm mounting width, universal brackets included. Fits up to three 16:9 monitors up to 28 or a single 21:9 monitor up to mm and 100mm VESA mounts included. Side screens allowing for more than 90 degrees adjustable toe in. Adjustable distance between monitors and driver s eyes: Monitors can be positioned directly behind the steering wheel or up to 30cm further away. Adjustability is a key word at Heusinkveld Engineering, so almost every component can be positioned where you want it to be. The frame is meant for serious simracers and motorsport professionals, so we chose installation stiffness above lightning fast adjustments. As we found seat sliders flex considerably at very high braking forces, your Sim Rig GT comes with a fixed, nonmovable, attachment for the seat. If you plan to use the Sim Rig in an environment where the seat requires large adjustments multiple times per day, we recommend mounting a tradional seat slider. For minor adjustments to compensate for the driver s length, you can easily and quickly adjust the pedal mounting plate. Page 1
3 Before we start The Sim Rig GT consists of 2 kits: The powder coated Bracket Kit and the aluminium Profiles Kit. You have either purchased: 1. The Bracket Kit and the Profiles Kit through Heusinkveld Engineering. 2. The Bracket Kit through Heusinkveld Engineering. You chose to source the aluminium Profiles Kit at a different vendor. You will need all the parts from both the Bracket Kit AND the Profiles Kit in order to assemble the Sim Rig GT frame. If you ve chosen option 2, you not only have to source the aluminium profiles yourself, but also various fasteners and mounting accessories. Consult the next few pages in this manual for a full parts list of both kits. This manual will now continue, assuming you either chose option 1, or sourced all the parts from the Profiles Kit (option 2) yourself in addition to the Bracket Kit. Page 2
4 What is included This schematic helps you to identify the large parts of your Sim Rig GT. Page 3
5 Parts list - large parts The Sim Rig GT product consists of the parts mentioned in these parts lists. The table below lists the large parts of your Sim Rig GT. The first column tells you in which kit the part can be found. The number in the second column corresponds with the large parts schematic on the previous page. Kit Nr Qty Description Profiles Kit x mm length aluminium profile, main simulator beams Profiles Kit x40 355mm length aluminium profile, lateral main frame beams Profiles Kit x40 750mm length aluminium profile, vertical wheel / monitor beams Profiles Kit x40 100mm length aluminium profile, handbrake spacer Profiles Kit x40 800mm length aluminium profile, monitor rack middle monitor mount Profiles Kit x40 360mm length aluminium profile, monitor rack outer monitors mount Profiles Kit x40 100mm length aluminium profile, monitor rack to brackets mount Bracket Kit mm powder coated rear (smaller) seat bracket Bracket Kit mm powder coated front (taller) seat bracket Bracket Kit mm powder coated pedal plate Bracket Kit mm powder coated Fanatec CSW spacers Bracket Kit mm powder coated wheel mount side brackets Bracket Kit mm powder coated wheel mount bracket Bracket Kit mm powder coated simulator feet Bracket Kit mm powder coated 100mm and 75mm VESA monitor brackets Bracket Kit mm powder coated outer monitor swing arm brackets Bracket Kit mm powder coated sequential shifter bracket Bracket Kit mm powder coated monitor frame uprights Bracket Kit mm powder coated handbrake mounting plate Bracket Kit mm stainless steel heel plate Page 4
6 Parts list - small parts The table below lists the small parts of your Sim Rig GT. The first column tells you in which kit the part can be found. Kit Part Qty Description Profiles Kit Plastic Cover Caps 24 Plastic end caps for all aluminium profiles and corner brackets Profiles Kit Corner bracket angle bracket with M8 bolt and nut and plastic cover bracket Profiles Kit M6 T nut guided bag of M6 T nuts for mounting brackets to aluminium profiles Profiles Kit Connection plate 3 80x40mm steel plate with screws and nuts for handbrake mount Profiles Kit M6x30 bolt 35 Long bolt for mounting pedals (12), shifter (2) Profiles Kit M6x25 bolt 78 Medium bolt for mounting brackets to frame Profiles Kit M6x20 bolt 20 Short bolt for VESA brackets to frame,heel plate to pedal plate Profiles Kit M4x30 bolt 25 Long monitor mount bolts Profiles Kit M4x18 bolt 25 Short monitor mount bolts Profiles Kit Cable binding block 10 Twist in cable management clips Bracket Kit 70mm feet 4 Four feet for the simulator to stand on Bracket Kit M10 washer + nut 10 Nuts and washers to mount feet to brackets (8 of each needed) Bracket Kit M6x30 locking lever 6 With integrated bolt - Pedal plate to frame Bracket Kit M6 nut 200 Plenty of nuts to mount pedals, wheel brackets etc Bracket Kit M6x18x1.6 washer 200 Plenty of washers to use with M6 bolts Bracket Kit M4 washers 500 Too many washers to use as monitor bolt spacers Bracket Kit M8x35 bolt 12 Seat brackets / OSW / SimSteering motors Bracket Kit M8 nut 12 OSW / SimSteering motors and Seat Brackets Bracket Kit M8 washer 40 Seat brackets / OSW / Simsteering motors Bracket Kit M8 locking lever 10 Without integrated bolt - Seat brackets Bracket Kit M5x40 bolt 4 AccuForce mount Bracket Kit M5 washer 4 AccuForce mount Bracket Kit M8 bolt lock plate 8 Seat brackets Bracket Kit cable ties 100 Long cable ties for cable management Page 5
7 What is NOT included We include a lot of accessories but you may need to visit the local hardware store for certain parts, depending on your seat and monitor choice. We also require you to use your own tools, as these are not supplied. Seat There is a great variety in racing seats available. We often go with the Cobra Imola, available in two sizes. The regular one fits up to about European jeans size 34 for a very snug fit, the GT version is 25mm (1 ) wider for a good amount of extra room. The mounting holes in the Sim Rig GT seat brackets are 8,5mm. Almost all side mounting race seats should fit on our universal bracket solution. We can t guarantee that all seats will fit though! The main factor is the mounting width of the seat. The brackets are spaced out 435mm. You can often find seat dimensions on the manufacturer website. These are the dimensions for the Cobra Imola seats (both versions): The standard seat has a width of 405mm and the wide GT version 435mm. The wide version has the same width as the frame, so it should fit with minimal spacers. The narrow seat will require a spacer stack of 30mm to fit, as the 405mm seat has to mate with the 435mm spaced seat brackets. Depending on the seat you choose, you need to source your own mounting bolts, washers and spacers. Also beware that not all seats are created equal. We have seen considerable tolerances on the positioning of the side mounting holes and seat width for identical types of seats. Page 6
8 Monitors Another situation we can t fully cover is mounting your monitors. We include two sizes of M4 bolt, which is the most common tread size used. We also include a box of washers that can be used as spacers to make sure most monitors will fit. However, on certain models it may be required to get a different type or length of bolt for mounting your screens. General tools required To assemble the cockpit ideally you have a work bench to avoid working on the floor, although that is always an option. If you use a normal table, be very careful as a scratch is easy to make! These tools are needed: 5mm allen key for M6 bolts, M8 countersunk bolts and M8 dome bolts. 10mm wrench for M6 nuts. 2x 17mm wrench for M10 nuts for the simulator feet. 3mm allen key for M4 monitor bolts. Rubber hammer to mount the profile end caps. Flat screwdriver to break off 90 degree bracket lips. Wheel specific tools required Bolts and nuts for all supported wheels are included with the Sim Rig GT. These tools are needed: Accuforce mounting: M5x40 bolts which requires a 4mm allen key. Fanatec CSW mounting: M6x30 bolts which requires a 5mm allen key. SimSteering / OSW mounting (Kollmorgen AKM-5x, Lenze & Mige motors): M8x35 bolts and nuts which require a 13 mm wrench. Page 7
9 Construction essentials To make sure the powder coated brackets are tightly secured to the aluminium profiles, 2 washers have to be used between the bolt head and the bracket. In the left picture you can see what happens when only one washer is used. The bolt bottoms out in the aluminium profile and the black powder coated bracket isn t secured against the aluminium profile. In the right picture using 2 washers, the powder coated bracket will be tightly fixed against the aluminium profile. This is the correct way and it also applies to the locking levers (unless specified otherwise). We always want to clamp the brackets against the beams, not allowing them to wobble as they would with only 1 washer. 10mm thick brackets need M6x25 bolts, unless specified otherwise. Also, please note that a T nut can be inserted in the middle of a profile and not just at the open end. The locking levers are ideal for tool-less adjustments. They are used on the pedal plate and seat brackets. Pulling up on the lever makes them rotate freely, so you can adjust the handle position without tightening or loosening the screw. Letting go, the spring loaded lever will return in locked position and you can now tighten or loosen the connection. Page 8
10 The hard plastic cable binding blocks can be twisted to secure them in the slots of the aluminium profile. Cable ties can then be inserted and used to neatly rout the cables. The VESA monitor brackets most likely require spacers because of the M6 bolt heads that stick out after mounting the VESA bracket to the aluminium profile. We include 2 lengths of bolt, and you can make a stack of washers to act as spacers. This method should make most monitors fit. The 90 degree angle brackets have small lips on them which, if needed, can be broken off easily with a flat screwdriver Page 9
11 A glimpse at the end result This is the bare frame in 3D front view which should appear after you ve followed this guide closely. Page 10
12 3D rear view Page 11
13 Top view Page 12
14 Side view Page 13
15 Ok, let s get to work! The actual assembly schematics start here. We recommend that you follow these instructions one by one. Steering wheel & shifter mount assembly Required parts and tools: 4x 90 degree corner brackets (use screwdriver to break the lips off) 8x M6x25 bolts 16x M6x18x1.6 washer 8x M6 nut 4x corner bracket cover caps 2x side bracket (part 12) 1x main bracket (part 13) Shifter: 2x M6x30 bolts Shifter: 4x M6x18x1.6 washer Shifter: 2x M6 nut Page 14
16 The top image on this page shows the appropriate mounting holes for your steering wheel. Cyan: OSW Mige 130 (M8x35 bolts + washers + M8 nuts) Red: SimSteering AKM5x, OSW Lenze (M8x35 bolts + washers + M8 nuts) Yellow: Accuforce Pro (M5x40 bolts and washers) Green: Fanatec CSW base (M6x30 bolts + spacers, also see the next image) For mounting the Fanatec CSW you will also need to use the 2 provided powder coated spacers as you can see below. Page 15
17 Handbrake mount assembly This is only needed if you plan to mount the Heusinkveld Engineering Sim Handbrake. The assembly will mount to the vertical main frame beam later. The parts needed are: 80x40, 100mm length aluminium profile with 2 cover caps 2x M6 T nut 2x M6x25 bolt 4x large M6 washers, 2 per bolt! 3x 80x40 countersunk holes steel connection plates 3x M8 countersunk bolts 3x M8 T nut 1x 10mm powder coated handbrake bracket (part 19) Page 16
18 Monitor rack One or three monitors can be mounted to the monitor rack. The angle of the side screens is completely adjustable and the entire rack can be placed closer or further from your eyes depending on your preference. This guide assembles the frame for 3 monitors, you can leave certain parts out if you use only one screen. The following parts are required: 1x 40x40, 800mm length aluminium profile 2x 40x40, 360mm length aluminium profile 2x 40x40, 100mm length aluminium profile 10x 40x40 cover caps 2x 90 degree bracket with M8 T nut and M8 dome head bolt and cover cap 4x 10mm powder coated side monitor angle brackets (part 16) 2x 10mm powder coated vertical rack brackets (part 18) 3x 10mm powder coated VESA brackets (part 15) 24 large M6 washers, 2 per bolt! 12x M6x25mm bolts 6x M6x20mm bolts 18x M6 T nut Page 17
19 Make sure there is 435mm (+-1mm) between the two short pieces of profile. Also make sure the long aluminium profile is nicely centered. There is ( )/2 = 142.5mm from each end to the short profiles. Mount the VESA brackets without washers using M6x20 bolts. Mount the side brackets with 2 washers and M6x25 bolts. Page 18
20 The side screen adjustment brackets go in with M6x25mm bolts, using 2 washers. Small screens can use the method on the left image to bring the side screens closer. The picture on the right is suitable for 27 and 28 screens. Page 19
21 Simulator Feet While wheels might be more realistic, we prefer to have the simulator staying in one place. To assemble the feet you need: 4x black plastic feet 8x M10 washer 8x M10 nut 4x powder coated feet (part 14) Don t forget to use M6x25 bolts with 2 washers when mounting the feet to the frame. Beware that the feet are not symmetrically shaped. Assemble two left and two right feet. Page 20
22 Main frame The simple design uses 160x40mm profiles for the main ladder frame. This results in extreme stiffness and almost no bending flex even at extreme brake pedal forces. 120x40mm vertical beams are strong and stiff enough to keep the monitor rack and steering wheel firmly in place. For this step you need: 16x 90 degree corner brackets with M8 T nut, M8 dome head bolt and cover cap 2x 40x160mm aluminium profile 1495mm length 2x 40x160mm aluminium profile 355mm length 2x 40x120mm aluminium profile 750mm length 8x cover cap 40x80mm for 40x160 profiles 4x cover cap 40x120mm for vertical profiles Take care during assembly that the distance between the vertical beams and the front of the frame (550mm) is the same on both sides and that the vertical beams are indeed vertical. There is a possibility to attach them at an ever so slight angle. Doing this on a flat surface such as a table makes this the easiest. Page 21
23 Mounting the feet to the frame The feet have to be mounted as shown below. Mounting the front feet too far forward will cause bending in the aluminium profiles. The front feet are only just in front of the vertical profiles. Parts required are: 8x M6x25 bolt 16x large M6 washer, 2 per bolt! 8x M6 T nut Page 22
24 Mounting the seat brackets to the frame By separating the front and rear brackets, almost all side mounting seats should be able to fit on the frame. The brackets have fine tuning holes for adjusting the height. By going up or down one slot in the aluminium profile you can further change how low or high you want to sit. Did we mention it is adjustable? Parts required are: 8x M8 locking lever (without integrated bolt) or 8x M8 nut (this gives a cleaner look) 8x M8 bolt 8x bolt lock plate 24x large M8 washers (3 per bolt) 2x front seat bracket (part 9) 2x rear seat bracket (part 8) First slide the bolt lock plates into the outside of the main horizontal beam of the frame. Page 23
25 Then mount the bracket parts onto the bolts, using 3 washers per bolt and a locking lever (or alternatively a single washer per bolt and an M8 nut). Page 24
26 Mounting the pedal plate to the frame An extremely strong 15mm solid aluminium plate makes sure the pedal plate won t flex even at high pedal forces. Mounting it is simple. You need: 4x M6x30 grip handles (with integrated bolt) 10x large M6 washers, 2 per locking lever! 4x M6 T nuts 1x pedal plate (part 10) 1x heel bracket (part 20) 2x M6x20 bolt for heel bracket mounting Page 25
27 Mounting the wheel bracket assembly to the frame To mount the already assembled steering wheel bracket to the frame you need: 6x M6x25 bolt 12x large M6 washer, 2 per bolt! 6x M6 T nut Steering wheel bracket assembly The lower left bolt goes through a hole, the other two are slots, allowing you to adjust the angle at which the steering wheel sits. Page 26
28 Mounting the monitor rack to the frame The monitor rack assembly can now be mounted using the following parts: 4x M6x25 bolt 8x large M6 washer (2 per bolt!) 4x M6 T nut Monitor rack assembly Page 27
29 Mounting the handbrake assembly to the frame The handbrake mounting assembly we made earlier now attaches to the vertical main beam of the frame using: 3x M8 T nut 3x M8 countersunk screw Page 28
30 Finishing your simulator If you have followed all the instructions in this manual one by one your Sim Rig GT frame will now be ready. In order to build a working simulator, you of course need to add other peripherals. HE Sim Pedals Mounting the Sim Pedals Pro or Ultimate to the pedal plate is similar to mounting them to our standalone Sim Pedals Baseplate product. We d like to refer you to our online manual for the Sim Pedals Baseplate ( ) for installation instructions. There are enough mounting materials supplied with your Sim Rig GT product which can be used for mounting the pedals and the controller (thickness of bolts must be identical, the length of the bolts may vary a bit compared to the Sim Pedals Baseplate manual). HE Sim Shifter Sequential The steering wheel assembly of the Sim Rig GT has a mount for the Sim Shifter Sequential. The shifter should be mounted on the outside of the mount. In order to install the shifter, please do the following: Remove 2 bolts on one the side of the shifter. You can discard these original bolts. Place the shifter against the mount. The black plastic cover should fit in the large circular hole in the powder coated bracket. The USB cable socket should face towards the pedals. Insert two 25mm or 30mm bolts through the bracket and then into the shifter. Use a washer between the bolt head and the bracket. Tighten these bolts. Sim Shifter Sequential mount Sim Handbrake mount Page 29
31 HE Sim Handbrake To the right of the steering wheel and shifter assembly is the mount for the Sim Handbrake. You can mount the Sim Handbrake (with the main unit of the handbrake in a vertical position) using M6x25 bolts, M6 nuts and M6 washers (these are supplied with the Sim Rig GT). On the previous page you can see an image of an installed Sim Handbrake. Wheel For installation of the wheel motor we refer to the Steering Wheel Assembly paragraph earlier in this manual. These instructions contain a schematic on how to mount your wheel motor. Seat & Monitors For mounting the seat and monitors to the frame, we refer to the earlier paragraphs Seat and Monitor in this manual, as well as to the instructions supplied by the respective manufacturer. PC, wheel controller box and cables You are free to position your pc and (if applicable) wheel controller box in any position you want. Personally we choose the following setup: Wheel controller box positioned to the right of the pedal plate. PC positioned to the right of the main vertical beams of the chassis. We mount a central 8 way electrical socket below the pedal plate onto the aluminium frame (out of view) All electrical plugs (including the power supply for the monitors) are routed to this central socket. We use cable binding blocks together with cable ties (both are supplied with your Sim Rig GT) to neatly route the cables. We hope you thoroughly enjoy your Sim Rig GT. Due to the flexibility this product offers with regard to peripherals, seats, different set-up options etcetera you may encounter situations which are not explained or illustrated in this manual. If you have any questions or suggestions, please send us an at: info@h-engineering.net This is manual version 1.2. The latest version of this manual can also be viewed at: Page 30
32 WOLFGANG REIP Blancpain GT Champion and Bentley factory driver Simulator training is essential for my race preparation. Products from Heusinkveld Engineering are the best and most realistic I have ever tried on my simulator.
Setup Guide and Chassis Tuning Tips (simple version) By Jim Daniels
This document is released into the public domain and may be reproduced and distributed in its entirety so long as all credit to Jim Daniels remains. If you find this guide helpful please consider donating
AP-Xtreme Sim-Racing Chassis Master Assembly Guide
AP-Xtreme Sim-Racing Chassis Master Assembly Guide This guide covers all options available for the AP-Xtreme chassis. Some sections of this guide will be skipped based on the options chosen. APX1000 APX2000
Prusa i3 Printer Assembly Guide
Prusa i3 Printer Assembly Guide Special thanks to Carlos Sanchez and Miguel Sanchez for the graphics. All graphics captured from their great animation: http://www.carlos-sanchez.com/ Prusa3/ For copyright
Sim Pedals Sprint preview
Sim Pedals Sprint preview In Q4 2018 Heusinkveld will release the Sim Pedals Sprint. This all new esports pedal set marks a major step forward in terms of mechanics, electronics and software. We listened
Down and Out Motor Mount Assembly & Installation Directions
Down and Out Motor Mount Assembly & Installation Directions Mounting the Down and Out Motor Mount correctly takes a lot of thought and a lot of planning. Please read the directions thoroughly and plan
Next, chase the threads in the lower A-arm mounts with the 5/8-18 tap and blowout any remaining particles.
Next, chase the threads in the lower A-arm mounts with the 5/8-18 tap and blowout any remaining particles. Now, apply some anti-seize to the threads of the pivot stud. Also put anti-seize inside the bore
Changing the Struts on a WK Jeep CRD
Changing the Struts on a WK Jeep CRD Step by Step By Chirpz Disclaimer: I do not claim that this procedure is the right way or even the best way to change your struts. This is what I did after reading
Steeda S550 MT-82 Tri-Ax Race Short Throw Shifter Installation Instructions For Parts: ,
Steeda S550 MT-82 Tri-Ax Race Short Throw Shifter Installation Instructions For Parts: 555-7317, 555-7318 Tools required 1. 7mm socket 2. 10mm socket 3. 13mm socket 4. 15mm socket 5. 18mm socket 6. 3/8
This bumper mounted swing away system works in conjunction with our plate steel bumpers (GVW-BUMPERS).
This bumper mounted swing away system works in conjunction with our plate steel bumpers (GVW-BUMPERS). Note: This swing away is ONLY designed to work with the GoWesty-designed plate steel bumpers (the
Bag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
Factory Five Racing, Inc. 818 Kit Assembly manual revision 1i update
Factory Five Racing, Inc. 818 Kit Assembly manual revision 1i update Pedal box...1 Cable Accelerator Pedal (2002-2005)...2 OEM seats...7 Windshield... 13 Center console... 19 Pedal box Attach the pedal
FULL FLOATER HUB KIT INSTRUCTION MANUAL
FULL FLOATER HUB KIT INSTRUCTION MANUAL WARNING: All components are shipped assembled for illustration purposes only. IT IS YOUR RESPONSIBILITY FOR FINAL ASSEMBLY. Please read instructions thoroughly before
OTK CHASSIS- SET UP GUIDE
OTK CHASSIS- SET UP GUIDE Introduction This setup guide is created to facilitate a user of OTK equipment to reach an optimal chassis setup and on-track performance. The different tuning possibilities and
Retro it Steering Column
Retro it Steering Column INSTALLATION INSTRUCTIONS for 1976-86 CJ5 & CJ7 FOR PART NUMBER S: 1520800010, 1520800020, 1520800051, 1526800010, 1526800020, 1526800051 S I NCE 1986 Instruction # 8000000010
Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List:
2015-2017 Ford Mustang V6 OEM-Style Fog Light Kit Parts List: Quantity: Tool List: LED Foglights/ Bezels 2 Flat head & Phillips screwdriver (if you ordered part#3600) Ratchet & Socket set OR Wiring harness
Nemesis-TCS Traction Control System Installation manual Kawasaki ZX _2005 with Standard or race seat
Nemesis-TCS Traction Control System Installation manual Kawasaki ZX0 004_005 with Standard or race seat Kit part No. TCS-4C ZX0_004_05.AA This application is designed for use with the Kawasaki ZX0 004_05
INSTALLATION INSTRUCTIONS SEMI-HIDDEN WINCH MOUNT Part Number:70005 Application: Ford Super Duty
INSTALLATION INSTRUCTIONS SEMI-HIDDEN WINCH MOUNT Part Number:70005 Application: Ford Super Duty Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
JEEP WRANGLER 5 DOOR 48L ADDITIONAL FUEL TANK FTJW003
JEEP WRANGLER 5 DOOR 48L ADDITIONAL FUEL TANK FTJW003 INSTALL TIME: 1.5 Hours IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE.
Two bolts at. Two each side where studs pass through. rear. Two bolts at. front. Front-most bolt for diagonal brace. Rear jacking point
The following describes the process of changing the transmission s gear oil in my own 2008 CS 6sp. I have no relationship with any of the products mentioned, other than being a satisfied consumer. Exercise
Our goal is to make the install a breeze. Please read the entire guide before beginning.
www.airkewld.com Page 1 of 6 IRS Axle Kit Install IRS Axle Kit Install Our goal is to make the install a breeze. Please read the entire guide before beginning. KITS SHOULD INCLUDE 2 - Control-arm mounting
For all Ram x4 Trucks, and all Ram x4 trucks.
Dodge Off Road, LLC Specializing in Dodge Ram Solid-Axle 4x4 Suspension and Steering for Off Road Applications 855.9009.DOR sales@dodgeoffroad.com dodgeoffroad.com DODGE OFF ROAD 5 th GEN STEERING KIT
Sim Pedals Sprint product manual
Sim Pedals Sprint product manual Congratulations on acquiring a set of Heusinkveld Sim Pedals Sprint! We hope you will enjoy this topof-the line racing simulator pedal set for many years to come. Introduction
Installation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles)
Installation Tips for your Remote Start system (for RS4LX>GMBP for GM vehicles) Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to doit-yourself
Jass.Performance Low Profiles Installation Manual
Jass.Performance Low Profiles Installation Manual The Jass.Performance Low Profiles are featuring: Fully reversible upgrade of the stock headlight bodies. Premium branded E-signed, TÜV aprooved Hella Headlights
FlexJet Carriage Circuit Board (PCB) Replacement
P/N: 111484 R0 14140 NE 200th St. Woodinville, WA. 98072 PH: (425) 398-8282 FX: (425) 398-8383 ioline.com FlexJet Carriage Circuit Board (PCB) Replacement Notices: Warning! Ensure that all AC power cables
Installation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013
Installation Tips for your Remote Start/Keyless Entry (for Honda/Acura Vehicles) [EVO-ALL] v1.02 updated 9/13/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in
S1 Sequential. T56 Magnum. Sequential shifter. Contents and assembly instructions
S1 Sequential Sequential shifter T56 Magnum Contents and assembly instructions Parts List Sequential shifter x1 Base plate x1 Base spacer x1 Drill Square x1 Shaft fitting x1 Square washer x1 8mm Aluminium
Retrofit Steering Column
Retrofit Steering Column INSTALLATION INSTRUCTIONS for 1970-75 Camaro FOR PART NUMBER S: 1620860010, 1620860020, 1620860051, 1626860010, 1626860020, 1626860051 S INCE 1986 www.ididitinc.com 610 S. Maumee
b o o s t r e t a i n e r v a l v e
b o o s t r e t a i n e r v a l v e i n s t a l l a t i o n i n s t r u c t i o n s For questions or tech support, CONTACT US! Email: greg@hiperformancestore.com sales@hpsimotorsports.com Sites: www.hiperformancestore-fiat.com
Installation Tips for your Remote Start system (for Toyota Camry & Prius C, ) Crimestopper RS0+ EVO-ALL T3468 rev#1.
Installation Tips for your Remote Start system (for Toyota Camry & Prius C, 2012-2014) Crimestopper RS0+ EVO-ALL T3468 rev#1.1 1/22/2015 Thank you for purchasing your remote start from MyPushcart.com -
How I installed new brake pads on my i with Sport Package (should be fine for other E39 s) By Robert B.
How I installed new brake pads on my 1999 528i with Sport Package (should be fine for other E39 s) How I installed new brake pads on my 1999 528i with Sport Package (should be fine for other E39 s) By
AEV30308AA Last Updated: 05/31/18. 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE
AEV30308AA Last Updated: 05/31/18 4 DUALSPORT sc SUSPENSION system for RAM 1500 air ride standard and rebel INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND
INSTALLATION GUIDE TCP RCKM-01
READ ALL INSTRUCTIONS COMPLETELY AND THOROUGHLY UNDERSTAND THEM BEFORE DOING ANYTHING. CALL TOTAL CONTROL PRODUCTS TECH SUPPORT (916) 388-0288 IF YOU NEED ASSISTANCE. INSTALLATION GUIDE TCP RCKM-01 Manual
Installation Instructions
Parts Installation Instructions DESCRIPTION PART # QTY A Alignment Tab PN ESB101 1 B Drill Guide PN ESB102 1 C Actuator Cable Assembly PN ESB103 1 C1 72 Actuator Cable 1 C2 5/16 Jam Nut 1 C3 Star Washer
Installation Instructions Z-Gate Shifter
Installation Instructions Z-Gate Shifter Part Number 80681 1998, 2001 by B&M Racing and Performance Products The B&M Z-Gate shifter can be used in vehicles equipped with most popular three speed automatic
Fanatec GT3RS V1 to GT3RS V2 Tutorial
Fanatec GT3RS V1 to GT3RS V2 Tutorial by Roy Visser 1 How to update your Fanatec GT3RS V1 wheel to a GT3RS V2 wheel Welcome to this guided and detailed tutorial for upgrading your Fanatec GT3RS V1 wheel
X-Brake Fitting Instructions See Appendix for fitting to Range Rover,Discovery and PTO vehicles + Upgrade kit
X-Eng is a division of Foundry 4x4 Limited The Old Bakery, Rear of Vale Terrace, Tredegar, Gwent. NP22 4HT X-Brake Fitting Instructions See Appendix for fitting to Range Rover,Discovery and PTO vehicles
Retrofit Steering Column
Retrofit Steering Column Installation Instructions for 1970-75 Camaro For Part # s: 1620860010, 1620860020, 1620860051, 1620869910, 1620869920, 1620869951, 1625860010, 1625860020, 1625860051, 1625869910,
Installation Instructions QUICKSILVER CONSOLE SHIFTER Fits: Chevelle / El Camino
WORK SAFELY! For maximum safety, perform this installation on a clean, level surface and with the engine turned off. Place blocks or wedges in front of and behind both rear wheels to prevent movement in
INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274
INSTALLATION INSTRUCTIONS JEEP 2011-UP JK SECURITY FULL CONSOLE #274 PARTS CHECKLIST Tuffy Console #9 Left Front Mounting Bracket #10 Right Front Mounting Bracket #11 Electronics mounting bracket #12 Divider
Mustang CDC Lightbar (94-04) - Installation Instructions
Mustang CDC Lightbar (94-04) - Installation Instructions The below installation instructions work for the following products: Classic Design Concepts Mustang Convertible Lightbar (94-04 Carbon Fiber) Classic
Fanatec Universal Hub conversion guide. January 2018
Fanatec Universal Hub conversion guide January 2018 This guide will show you how to fit our Fanatec conversion kit to the Universal Hub. The hub we are using was purchased in November 2017. Older versions
Installing AMP-wiring in a New Beetle
Installing AMP-wiring in a New Beetle Vehicle used: New Beetle 2.0i Type 9C (1999) Used set of cables: Dietz 35mm² power cable, double shielded Dietz chinch cable ( 35mm² Professional Line ) First of all:
Lockpicking Tools: User Guide
Lockpicking Tools: User Guide Tips & Tricks for using Lockpicking Tools Contents Introduction..3 Padlock Shims..5 Comb Picks....7 Jiggler Keys...9 The Lock Gun..11 Bypass Sheets....13 Bump Keys...14 Other
Installation Instructions
Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to
Small knife. Remove black panel shown. Save 6 retaining pins for re-install later.
2005-2009 Ford Mustang V6 Fog Light Wiring Kit Parts List: Quantity: Tools Required: Wiring harness 1 Flat head screwdriver PB-3425 Parts Bag 1 Ratchet & Socket set OR Ford OEM Switch (if you 1 Adjustable
Return to Instruction Sheet index. Installation Instructions For C-4 70 and Later, Except 70 Falcon
Page 1 of 8 Return to Instruction Sheet index TCI 260100 Trans-Scat Automatic Transmission Installation Instructions For C-4 70 and Later, Except 70 Falcon TCI 260100 Kit Contains: Qty. Description One
Fitting Instructions For The TDV6 EGR Blanking Kit To A 2006 Model Discovery 3 TDV6 GHSE
Part Number DA1112 Fitting Instructions For The TDV6 EGR Blanking Kit To A 2006 Model Discovery 3 TDV6 GHSE You do this modification at your own risk. Britpart won t be held responsible for what is written
FlexJet - Flex Cable Replacement
P/N: 109515R0 14140 NE 200th St. Woodinville, WA. 98072 PH: (425) 398-8282 FX: (425) 398-8383 FlexJet - Flex Cable Replacement Notices: Warning! Ensure that all AC power cables are removed from the printer
2010 Prius Maintenance
2010 Prius Maintenance Changing Oil Disclaimer: All the information stated in this document was provided by Prius owners. None were affiliated with Toyota Motor Corporation, except as customers. This document
Installation Instructions for disc brakes
Installation Instructions for disc brakes Bedford CF 230-280, built 1974-1986, not suitable for vehicles with rear twin tyres Included 2 pcs. Wheel Hubs with Wheel Bolts, Mounted Brake Discs and Wheel
Rebuilding the Power Steering Pump for a 2007 Honda Accord 4CYL
Rebuilding the Power Steering Pump for a 2007 Honda Accord 4CYL Disclaimer: I have benefited greatly from others who have taken the time to post auto repair videos/tutorials online. To try and return the
LAND ROVER DISCOVERY 3/ SPARE WHEEL CARRIER
LAND ROVER DISCOVERY 3/ 4 SPARE WHEEL CARRIER RBLD007 INSTALL TIME: 4.5 Hours NOTE: Park Distance Control will be affected by this fitment and the customer should be informed. IMPORTANT WARNING! IT IS
Installation Instructions Unimatic Shifter
Installation Instructions Unimatic Shifter Universal Shifter for Automatic Transmissions Part Number 80775 2000 by B&M Racing & Performance Products LLC The B&M Unimatic is a universal shifter that will
P R O D U C T C ATA LO G U E
PRODUCT CATALOGUE Hi, 36 years ago, I was injured in a racing accident. I realised quite quickly that if I wanted a good wheelchair I was going to have to build it myself. What was I looking for? Well,
M4 x 14mm (x1) Silver Phillips Head Security Screw. Bolt Through Washers (x3)
SSKS SSKPB SSKW Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm Desk Mount HARDWARE 3/4/s Display Mounting s Desk Clamp VESA monitor head Arm Assembly M4 x 12/16/25mm (x4)
Installation Instructions Table of Contents
Installation Instructions Table of Contents Pre- Installation of Garage Storage Lift 2 Layout the Garage Storage Lift 3 Installing the strut Channels 3 Install the Drive Assembly 5 Install the Drive Shaft
OEM Cruise Control Installation in GMC/Chevy NBS trucks
OEM Cruise Control Installation in 99-02 GMC/Chevy NBS trucks May 2008 ~ Rampage_Rick Having just installed factory cruise control in my 00 Sierra, I thought I d share the fun. I followed the steps outlined
Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3
Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage
CST F1 Pedals. Owner s Manual. (Adjustable Angle version)
CST F1 Pedals Owner s Manual (Adjustable Angle version) Adjustments: 1) You can make some minor pedal throw adjustments using the adjustable pedal stop. Be careful to make sure that the pot linkage is
JK REAR BUMPER AND TIRE CARRIER
JK REAR BUMPER AND TIRE CARRIER Installation Guide AEV30105AA (Updated 5/10/10) Page 1 of 20 Page 2 of 20 EXPLODED VIEW PLEASE READ BEFORE YOU START IN ORDER TO INSTALL THIS PART PROPERLY YOU OR YOUR INSTALLER
Land Cruiser FJ80 and FZJ80 Double Swingout Rear Bumper Installation Instructions PRELIMINARY
Land Cruiser FJ80 and FZJ80 Double Swingout Rear Bumper Installation Instructions Fits 1991-1997 80 Series Land Cruiser / Lexus LX450 PRELIMINARY Thank you for purchasing a Rear Bumper for your Land Cruiser.
RS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR JEEP WRANGLER ALL MODELS.
RS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR 2007-2016 JEEP WRANGLER ALL MODELS. Rear Bumper Installation Instructions 1) Remove factory rear bumper, (this includes all tow hitch
TCI FastGate Shifter Installation Instructions
151 INDUSTRIAL DRIVE ASHLAND, MISSISSIPPI 38603 http://www.tciauto.com TELEPHONE: 662-224-8972 FAX LINE: 662-224-8255 E-MAIL: tech@tciauto.com TCI 616541 FastGate Shifter Installation Instructions The
RZR 900S/4, 1000S 1.5 Lift Kit
RZR 900S/4, 1000S 1.5 Lift Kit Polaris RZR 900S/4, 1000S 2015+ Part #: 5101255 Rev. 082316 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY
Remove black panel shown. Save 6 retaining pins for re-install later. Pry up on center part of pin first. Then pry out entire retaining pin.
2005-2009 Ford Mustang V6 Fog Light Wiring Kit Parts List: Quantity: Tools Required: Wiring harness 1 Flat head screwdriver Supplemental wire leads 2 Ratchet & Socket set OR Wire tap red 2 Adjustable Wrench
Balancing the Wheels on a Bench Grinder, version 2
Balancing the Wheels on a Bench Grinder, version 2 By R. G. Sparber Copyleft protects this document. 1 I recently replaced the wheels on my bench grinder and the vibration was horrible. With a lot of help
Mishimoto Performance Aluminum Radiator w/ Stabilizer - Manual (97-04 GT, Mach 1; Cobra)
Mishimoto Performance Aluminum Radiator w/ Stabilizer - Manual (97-04 GT, Mach 1; 97-01 Cobra) Installed on: 2000 Mustang GT (manual transmission) Tools: 8mm socket 10mm socket 13mm socket 3/4" wrench
ALL AMERICAN BILLET. Front Drive System - Small Block Ford Installation Instructions
ALL AMERICAN BILLET Front Drive System - Small Block Ford Installation Instructions Small Block Ford with AC & PS All American Billet Store (800) 764-0926 www.allamericanbilletstore.com Items needed for
Making Instructions Version 2.1 for Windows
Making Instructions Version 2.1 for Windows Ohbot Ltd. 2017 About Ohbot has seven motors. Each connects to the Ohbrain circuit board and this connects to a computer using a cable. Ohbot software allows
We thank you for purchasing a manual petcock conversion kit from Murphs!
We thank you for purchasing a manual petcock conversion kit from Murphs! The first step is removing the gas tank from the bike. We suggest running the tank down to reserve before removal, both for the
BX Honda CR-V Installation Instructions
Attachment Tab Height: 15.5 Attachment Tab Width: 24 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories
J&M Stainless Steel Teflon Brake Lines - Front (94-98 Cobra)
J&M Stainless Steel Teflon Brake Lines - Front (94-98 Cobra) Time Required: 30min-1 hour. Tools and Supplies Required: Jack Jack Stands Lug Wrench or 13/16 Socket 10mm Socket Socket Wrench Torque Wrench
Technical Support (707)
Installation Instructions UNIMATIC SHIFTER Fits: GM, Powerglide, Ford and Chrysler Transmissions See Application Guide for Specific Vehicles Catalog # 80775 WORK SAFELY! For maximum safety, perform this
SLOWINGDOWN. For those looking for the ultimate heartpounding STAINLESS STEEL BRAKES DELIVERS WITH AN AWESOME MID-YEAR NOVA BRAKE KIT
SLOWINGDOWN STAINLESS STEEL BRAKES DELIVERS WITH AN AWESOME MID-YEAR NOVA BRAKE KIT By Tony Gutierrez Photography by the author For those looking for the ultimate heartpounding enjoyment, strap yourself
VW & Audi TDI CR140 ECO KIT Installation Guide
VW & Audi TDI CR140 ECO KIT Installation Guide This guide is to help you install your new Rawtek DPF, EGR & Adblue Delete Exhaust ECO Kit on your (2009-2014) VW / Audi with 2.0l CR140 Diesel Engine. Note:
Chrysler TorqueFlite Shift Improver Kit Part No A-727 (V-8) A-904 (V-8) (A-998 & A-999)
FORM # 9500606-03 Installation Instructions Chrysler TorqueFlite Shift Improver Kit Part No. 10225 1971-1977 A-727 (V-8) 1971-1977 A-904 (V-8) (A-998 & A-999) 1998, 2005, 2010 by B&M Racing & Performance
Potentiometer Replacement
Potentiometer Replacement Tools Required: 2x 7/16 1/2 Nut Driver 1/8 Allen Wrench Small Straight Screwdriver Medium Phillips A potentiometer is a device which translates mechanical rotation into variable
X-Type w/ non-premium sound amplifier installation instructions
X-Type w/ non-premium sound amplifier installation instructions 1. Pull radio from dash (see Radio Removal Instructions ) 2. Disconnect wiring harness from back of radio by pushing in tab on plug and pulling
Spikes-Spider Hub Installation
Spikes-Spider Hub Installation The instructions that are provided with the Spikes Spiders are pretty good. I've created this page for two reasons: to show those that are thinking of buying a set exactly
4TH GEN SEATS IN A 3RD GEN TRUCK
4TH GEN SEATS IN A 3RD GEN TRUCK by Flopster843 02 Oct 2016 If you drive a 3rd generation Dodge Ram truck, I am sure you have discovered that the OEM seats are not the greatest (Figure 1.) They are extremely
Step 1 Wiring your remote start. Installation Tips for your Remote Start system (for GM vehicles) V3.3 revised 9/12/2013
Installation Tips for your Remote Start system (for GM vehicles) V3.3 revised 9/12/2013 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to
Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
Serial Number Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
Installation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012
Installation Tips for your Excalibur Remote Start (for Honda and Acura Vehicles) rev 11/28/2012 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts
Nemesis-TCS Traction Control System Installation manual Honda CBR600 RR 2003_04 with race seat
Nemesis-TCS Traction Control System Installation manual Honda CBR600 RR 2003_04 with race seat Kit part No. TCS-4C_CBR600_RR_0304.AA This application is designed for use with the Honda CBR600 RR 2003_2004
SOP Instructions & Check Sheet for MATRIX X Bike Installation
1000390 Rev 2 SOP Instructions & Check Sheet for MATRIX X Bike Installation Tools Needed 1. 13mm, 15mm (for pedals) and 17mm wrenches 2. Metric Hex Keys (long) set including 3mm, 4mm, 5mm, and 6mm. 3.
Installation Instructions Console Megashifter
Installation Instructions Console Megashifter 1968-1969 Camaro Part Number 81035 This B&M Megashifter is designed to fit in the console of a 1968-1969 Chevrolet Camaro. In 1968, these vehicles were equipped
First, check and record the camber and caster readings, they will be adjusted later.
First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.
INSTALLATION GUIDE. JK Rear bumper & tire carrier. AEV30105AC Last Updated: 10/11/16 US PATENT: D642,502 ; D
AEV30105AC Last Updated: 10/11/16 JK Rear bumper & tire carrier US PATENT: D642,502 ; D633.024 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING
OBP Pedal Box Fitting Tech Session
OBP Pedal Box Fitting Tech Session A good quality bias pedal box is an absolute must for any serious track day car or race car. Most car brakes systems, even when fitted with ABS, use a vacuum servo to
Torqueflite Manual/Automatic Valve Body
TCI 122400 Torqueflite Manual/Automatic Valve Body This valve body can be installed in a few hours by carefully following directions. Read all instructions first to familiarize yourself with the parts
Replacing MK4 Golf/Jetta radiator mounts in-car
Replacing MK4 Golf/Jetta radiator mounts in-car This is a guide to replacing the radiator mounts in a MK4 Golf/Jetta. This involves moving the core support to the service position which allows you to do
Installation Tips for your GMDLBP + Excalibur Remote Start system (for GM vehicles) v1.01 updated 10/09/13
Installation Tips for your GMDLBP + Excalibur Remote Start system (for GM vehicles) v1.01 updated 10/09/13 Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing
Pontoon Assembly Instructions and manual. Read before using hoist.
Page 1 Pontoon Assembly Instructions and manual. Read before using hoist. For Models 32BL18, 32BL22, 32BL25 and 42BL28 R Model 32BL22 Shown Proudly Made in Michigan By NuCraft Metal Products 402 Southline
Remove the 3-11mm nuts holding mirror on. Don t drop the nuts!
2005-2012 Ford Mustang Puddle Lamp Kit Parts List: Quantity: Tool List: LED Lamps 2 Flat head screwdriver Seals 2 Ratchet & Socket set OR Nuts 2 Adjustable Wrench Wiring harness 1 Drill & 11/16 th bit
Installation Instructions Unimatic Shifter
Installation Instructions Unimatic Shifter Universal Shifter for Automatic Transmissions Part Number 80775 2010, 2000 by B&M Racing & Performance Products The B&M Unimatic is a universal shifter that will
Door Panel Removal & Window Stop Adjustment
Door Panel Removal & Window Stop Adjustment By: Jeff Wolford Disclaimer: This is simply an article of how I fixed my car. I m not responsible if you break, scratch, or mess up anything following my example.
»Product» Safety Warning
#F9387 Installation Instructions 1999-2003 Ford Super Duty 2/4wd Gas Only 3" Body Lift Kit Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone
MKVI Jetta Fog Light Kit
MKVI Jetta Fog Light Kit Part Number VW Jetta Fog Light Installation This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation
Vehicle Specific Instruction Notes
Vehicle Specific Instruction Notes Most later model vehicles use a plastic and felt anchoring strip in place of the older metal rods. We have provided rod pouches on all of our new seat skins that will