BACKHOE LOADER 2CX/2CX STREETMASTER/2CXS

Transcription

1 SUPR KO LOR / STRTMSTR/S M. NIN POWR: 55kW (75hp) M. KO I PT (STNR IPPR): 3.67 metres (1ft 0in) SUPR K STTI IMNSIONS ackhoe Loaders feature heavy-duty one piece mainframe, componentised driveline and fully enclosed engine compartment. ll fluid and component compartments are lockable using the ignition key. Streetmaster S Total travel length 5.13 (16-10) 5.40 (17-9) 5.13 (16-10) xle centreline distance 1.99 (6-6) 1.99 (6-6) 1.99 (6-0) Slew centre to rear axle centre distance 1.13 (3-8) 1.13 (3-8) 1.13 (3-8) Stabiliser feet clearance 0.31 (1-0) 0.31 (1-0) 0.31 (1-0) Kingpost clearance 0.49 (1-7) 0.49 (1-7) 0.49 (1-7) Streetmaster S Steering wheel centre height 1.76 (5-9) 1.76 (5-9) 1.76 (5-9) ab roof height.65 (8-8).65 (8-8).65 (8-8) Total travel clearance.7 (8-11).7 (8-11) 3.05 (10-0) Rear frame width 1.85 (6-1) 1.85 (6-1) 1.98 (6-6) K Shovel width 1.85 (6-1) 1.85 (6-1).00 (6-7)

2 KO LOR IRMSTR M. NIN POWR: 53.8kW (73hp) STTI IMNSIONS irmaster Loaders feature heavy-duty one piece mainframe, componentised driveline and fully enclosed engine compartment. ll fluid and component compartments are lockable using the ignition key. irmaster Total travel length 5.17 (16-11) xle centreline distance 1.99 (6-6) Steering wheel centre height 1.76 (5-9) ab roof height.65 (8-8) irmaster Total travel clearance.7 (8-11) Shovel width (blacktop P shovel) 1.37 (4-6) Width over tyres 1.83 (6-0)

3 KO LOR ROUN LIN NLS NIN irect injection diesel. elt driven water pump, cold start aid territory dependent. 1 Streetmaster irmaster S ngine emissions Stage III Stage III Manufacturer spiration Turbo charged Turbo charged isplacement litre No. of cylinders 4 4 ore mm Stroke mm Rated engine rpm Power ratings Rated ISO (S 1995 ross) kw (P) 55 (75) 53.8 (73) Maximum torque Rated ISO (S 1995 ross) Nm (lbf ft) 39 (43) 39 (43) Max. torque rpm STRIN ull power hydrostatic system utilising the main hydraulic pump with integral steering priority valve. In the event of engine failure, emergency steering is maintained. pproach angle 45 Interference angle/ramp to ground plane eparture angle 7 eparture angle 7 S Streetmaster irmaster Steering axles ront and rear ront and rear ront and rear ront and rear Steering turns lock to lock Kerb kerb turning circle unbraked 4WS 6.85 (-6) 6.85 (-6) 7.0 (3-9) 6.85 (-6) Kerb kerb loader clearance circle unbraked 4WS 8.71 (8-7) 8.71 (8-7) 9.35 (30-8) 8.71 (8-7) (000mm P) OPRTIN WITS NIN SUPPORT SYSTM S Streetmaster irmaster Weight 5900 (1980) 6300 (13860) 6150 (13530) 5890 (1958) ngine support system is designed for ease of daily checks, routine maintenance and longer service intervals. uel type iesel. uel filter Replaceable spin-on cartridge plus water/sediment separator. ir cleaner ual, dry element cyclonic type. Oil filter and lubrication ull flow, spin-on type filter. ooling system ot climate specification, pressurised 14.5 psi (1.0 bar) suction fan. Pressurised recovery tank.

4 KO LOR LTRIL N INSTRUMNTTION 1 volt negative ground, utilising wiring and connectors meeting IP69 water ingress test standard. entral fuse panel supplemented with main circuit breakers at battery positive terminal. auges Tachometer, engine coolant temp, fuel level, hourmeter clock. Warning system udible and visual system for engine oil, transmission, park brake, battery, air cleaner, alternator. attery 900 /110 /hr. Pre-wire Radio speakers (cab), beacon (all). orn ontrolled from both front and rear. lternator 95 amp. ront working lights twin beam fixed position. Rear working lights adjustable. RR L rear axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations. ll models Type Max-trac torque proportioning with outboard planetary drive Limited slip xle ratings Static load rating 7484 (16500) ynamic load rating 3765 (8300) TRNSMISSION The Transmissions are designed and built specifically for ackhoe Loaders. They feature synchronised shifting in all gears. Powershuttle between forward and reverse. round speeds are designed to maximise production. M S Streetmaster irmaster Manufacturer Type Syncroshuttle Syncroshuttle Syncroshuttle Syncroshuttle Torque converter 80mm (11") 80mm (11") 80mm (11") 80mm (11") Torque converter ratio.67:1.67:1.67:1.67:1 ears forward/reverse ear selection Manual Manual Manual Manual Shuttle control /R Power shuttle Power shuttle Power shuttle Power shuttle Travel speeds kph (mph) kph (mph) kph (mph) kph (mph) Tyres front 1.5x18 ear (.) 3.6 (.) 3.6 (.) 3.3 (.1) ear 9.9 (6.) 9.9 (6.) 9.9 (6.) 8.9 (5.5) ear (1.7) 0.5 (1.7) 0.5 (1.7) 18.1 (11.) ear (0.6) 33.1 (0.6) 33.1 (0.6) 8.8 (17.9) RONT L front axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations. ll models Type Max-trac steer drive torque proportioning xle ratings Static load rating 7484 (16500) ynamic load rating 3765 (8300) Oscillation angle 9.5 Steering ram ouble acting xcellent visibility (and safety) is provided by the extra large tinted glass areas. ab frame is ROPS and OPS approved for maximum operator protection. ISO standard 3471 and 3449 (S 1040 and 31). fully adjustable seat with lumbar support combines with ergonomically positioned controls to minimise operator fatigue. The in-cab noise levels are the lowest in the business for maximum operator comfort. radio location is provided as standard plus twin speakers for stereo sound. ab provides easy access through a left hand single door. Standard features include: lap seat belt, 3 speed fresh air/recycle heater, front and rear screen wash/wipers (cab), front and rear horn, exterior mirrors, and flat easy-clean floor. The instrument panel is positioned to the right-hand side for ease of viewing from either the loading or excavating position and has an optional lockable cover for vandal proofing. ngine speed, fuel and coolant temperature gauges, (and clock on cab builds) are mounted in the panel. ixed steer column. Large opening rear window (cab). Static or mechanical suspension seat gives the operator a comfortable operating position. 1V power supply. RKS The braking system ensures effective, fade-free braking. The self-adjusting, multi-disc arrangement is inboard mounted and is oil immersed for minimum maintenance and a long operating life. Twin brake pedals provide tighter turning circle and enhanced steering control on slippery ground. utomatic compensation ensures straight machine braking. isc diameter: 165 mm (6.5 in). riction area: sq.mm (0 sq. in) per brake. The independent parking brake is mounted on the input shaft rear axle and will hold the machine on 1:3 gradients. It is an over-centre type, adjustable within the cab, with transmission disconnect to prevent premature brake pad wear. Park brake disc diameter: 85 mm (11. in). riction area: sq.mm (116 sq. in).

5 KO LOR 340/65 x R18 oodyear 340/80 x R18 Michelin ML 1.5 x 18 x 10 oodyear 340/80 R18 oodyear IT530 The Open entre system uses gear pumps with a power modulation valve that automatically varies hydraulic power to match digging conditions for extra performance and power. Open centre hydraulic system using simple and reliable high efficiency gear pump. Single pump system with priority valve to ensure metered supply to steering and main hydraulic system. asily used, ergonomically positioned levers give excellent control of the loader and backhoe, thus reducing operator fatigue. full flow 10 micron filter ensures that oil stays free of contaminants., S, irmaster** Streetmaster Pump flows at 00rpm* l/min (gal/min) Main pump output 81.0 (17.8) System working pressure bar (lbf/sq in) ackhoe and loader 30 (3335) *Optimum flow **1900rpm TYRS YRULI SYSTM SRVI PITIS, Streetmaster, S, irmaster ltr (gal) ooling system 14 (3.70) uel tank 83 (18) ngine oil with filter 11 (.4) Transmission with filter 17 (3.74) Rear axle 9.0 (.0) ront drive axle 9.0 (.0) ydraulic system incl. tank 83 (18) OMPRSSOR (irmaster model only) The screw type compressor is purpose-designed for resurfacing work. It offers true 140 cubic feet per minute (66 litres per second) capacity. heavy duty cage protect against impact damage while an automatic speed setting on the compressor ensures maximum economy by providing power on demand. n external stop/start facility means that the operator doesn t have to be in the cab to engage the compressor drive. It also allows fast shutdown in an emergency. With the oil/air receiver only requiring an inspection every 6 years, maintenance time will be cut to a minimum. The compressor will only operate when the parking brake is applied. nd to minimise the risk of mechanical damage, overheat sensors will disengage the compressor drive if the oil temperature rises above normal. Type ompair olman screw type ir output 140M, 66 litres/sec Pressure at outlet taps 7 bar (100psi) ngine speed control ully modulating engine speed control linked to air demand ompressor drive irect ompressor cooling ir blast type ir outlets ¾ locks ompressor oil capacity 17 litres (3.3 gal) round clearance under compressor assembly 73mm (10.7 in) Weight of compressor plus balance weight 900kg (1983 lb) Tool stowage Two heavy duty breakers Power take off Independent, hydraulically operated SPIITION S Streetmaster irmaster ending dipper l xavator quickhitch l Loader quickhitch l ammer pipework l Streetpads l Toolbox and tools l l l l attery isolator l l l l Smooth ride system (SRS) Loader arm pipework urn to dig Object handling kit LiveLink iodegradeable oil ir condiotioning ydraulic tool circuit ydraulic hose reel (9m) l = Standard, = Option

6 KO LOR LOR IMNSIONS P LOR loaders provide parallel lift self levelling on the up and down cycle enhancing load retention and use of optional pallet forks. igh capacity buckets combined with high lift and breakout forces maximise productivity..p. Shovel 6 in 1 ucket breakout force kgf (lbf) 3600 (791) 3600 (791) Loader arm breakout force kgf (lbf) 3850 (8471) 3850 (8471) Lift capacity to full height (1850mm wide) 00 (4844) 100 (464) S R V M N O U T Q LOR IMNSIONS Narrow bucket P shovel 6 in 1 shovel Overall width with bucket 1.37 (4-6).00 (6-7).00 (6-7) M ump height.4 (7-11).49 (8-)*.48 (8-)* N Load over height.99 (9-10).99 (9-10).99 (9-10) O Loader hinge pin height 3.4 (10-8) 3.4 (10-8) 3.4 (10-8) P Pin forward reach 0.33 (1-1) 0.33 (1-1) 0.33 (1-1) Q Reach at ground (toe plate horizontal) 1.43 (4-8) 1.43 (4-8) 1.44 (4-9) R Max. reach at full height 1.13 (3-9) 1.13 (3-9) 1.14 (3-9) S Reach at full height fully dumped 0.71 (-4) 0.71 (-4) 0.71 (-4) T ig depth 0.10 (0-4) 0.10 (0-4) 0.10 (0-4) U Roll back at ground degrees V ump angle degrees aw opening width N/ N/ 0.70 (-3) vailable on l l S l l Streemaster l irmaster l l l

7 KO LOR LOR TTMNTS LOR TTMNTS irect Mount Y Z Loader buckets are listed according to size and application. ll buckets are drilled to accept optional auxiliary cutting edge or teeth. lat top box section provides rigidity and assists in bucket levelling. S.P. Shovel apacity S 6 in 1 Shovel apacity S Width m Rated m³ (yd³) Struck Rated m³ (yd³) Struck 000 (6-7) 0.7 (0.9) 0.56 (0.73) 0.6 (0.78) 0.49 (0.64), Streetmaster, irmaster.p. Shovel apacity S 6 in 1 Shovel apacity S Width m Rated m³ (yd³) Struck Rated m³ (yd³) Struck 1850 (6-0) 0.6 (0.7) 0.46 (0.59) 0.6 (0.78) 0.49 (0.64) KO TTMNTS Standard Profile ucket backhoe buckets are designed specifically for use on machines with pin positions to maximize tearout, load retention and straight wall digging characteristics. W LOR IMNSIONS orklift Performance ata Quickhitch mounted forks W orks tine length 1.0 (3-11) orks tine width 0.1 (0-4) orks reach at ground level 1.0 (3-4) Y orks reach at full height 0.71 (-4) Z orks lift height max (9-11) ork spacing min 0.15 (0-6) ork spacing max 1.8 (4-) 500mm load centres 1600 (356) Max. rollback at ground degrees 10 Width apacity S mm (in) m 3 (ft 3 ) m 3 (ft 3 ) 30 (9) 0.08 (1.0) 0.0 (0.79) 300 (1) 0.03 (1.07) 0.03 (1.07) 350 (14) 0.04 (1.43) 0.03 (1.07) 400 (16) 0.05 (1.79) 0.04 (1.43) 450 (18) 0.06 (.14) 0.05 (1.79) 600 (4) 0.09 (3.1) 0.07 (.50) 750 (30) 0.11 (3.93) 0.09 (3.1) KO TTMNTS rading ucket Width apacity Rated mm (in) m 3 (ft 3 ) 100 (48) 0.16 (5.71) KO TTMNTS ammermaster 60L Rockbreaker Required oil flow 0 68 ltrs per minute Strike rate blows per minute Tool diameter 63mm oules per blow 350 Working weight 30kg (506lb)

8 SUPR SUPR SUPR KO LOR KO IMNSIONS & Streetmaster S max dig depth S ft flat bottom Reach ground level to rear wheel centre Reach ground level to slew centre Reach at full height to slew centre Side reach to centre line of machine S operating height Maximum loadover height Total kingpost travel Standard ipper, Streetmaster radig 3045 (10-0) 3701 (1-) 3053 (10-0) 300 (9-11) 3675 (1-1) 306 (9-11) 5114 (16-9) 577 (18-9) 5107 (16-9) 3987 (13-1) 4600 (15-1) 3980 (13-1) 1406 (4-7) 1897 (6-3) 1406 (4-7) 448 (14-6) 5045 (16-7) 443 (14-6) 4073 (13-4) 4454 (14-7) 408 (13-3) 77 (9-1) 335 (10-7) 809 (9-3) 894 (-11) 894 (-11) 894 (-11) ucket rotation SUPR SUPR SUPR KO IMNSIONS & Streetmaster SUPR, Streetmaster Standard ixed ipper radig kgf (lbf) kgf (lbf) ucket tearout 400 (959) 400 (959) ipper tearout 1733 (381) 53 (4967) 84 (5035) Lift capacity of bucket pivot at full reach 79 (1607) 980 (161) 81 (1810) SUPR

9 KO LOR KO IMNSIONS S Standard ipper S max dig depth S ft flat bottom 3.59 (11-8) 5.74 (18-10) 6.35 (0-10) 5.73 (18-10) 4.61 (15-) 5. (17-) 4.60 (15-1).67 (8-9) 3.16 (10-4).67 (8-9) 5.15 (16-11) 5.73 (18-10) 5.13 (16-10) 4.59 (15-0) 4.97 (16-4) 4.59 (15-0) 3.3 (10-11) 3.74 (1-3) 3.3 (10-11) 3.9 (10-10) 3.70 (1-) 3.8 (10-9) 1.0 (3-4) 1.0 (3-4) STR STRTM R MST R TMST STR ucket rotation Total kingpost travel S TRT S loadover height R Maximum loadover height TMST S operating height 4.4 (13-11) STR Side reach to centre line of machine 3.66 (1-0) 3.59 (11-8) R Reach at full height to slew centre MST Reach ground level to slew centre 4.31 (14-) Reach ground level to rear wheel centre 3.66 (1-0) S TRT radig R TMST STR KO PRORMN S STR STRTM Standard ipper ucket tearout kgf (lbf) 400 (959) 1970 (4343) 487 (5483) 747 (1646) 453 (998) 697 (1536) R 487 (5483) TMST STR Lift capacity of bucket pivot at full reach kgf (lbf) 400 (959) ipper tearout radig