15% lighter. Air Cylinder. New. 1.31kg. Series CA2 CAT.ES20-222A. Reduced weight by changing the shape of the rod cover and head cover.

Transcription

1 ir ylinder ø, ø, ø, ø, ø Reduced weight by changing the shape of the rod cover and head cover. Weight reduced by up to ew RoS (ø- stroke) % lighter 1.31kg ew 1.54 kg Existing model Easy air cushion control umber of rotations of adjustable cushion valve increased to 3 umber of rotations increased ew 3 rotations. ir cushion adjustment range increased thus fine adjustment is now possible. Smooth operation at the stroke end Various switches such as compact auto switches and magnetic field resistant auto switches can be mounted. ompact auto switches D-M D- Magnetic field resistant auto switches D-P3DW D-P4DW exagon wrench ushion valve Series T.ES-

2 ir ylinder ew Part numbers with rod end bracket and/or pivot bracket available ot necessary to order a bracket for the applicable cylinder separately ote) Mounting bracket is shipped together with the product, but not assembled. D T Example) D -Z- W -MW Pivot bracket il one Pivot bracket is shipped together with the product, but not assembled. : it of pivot bracket and double clevis it of pivot bracket and trunnion Rod end bracket il one V Single knuckle joint W Double knuckle joint With rod end bracket V: Single knuckle joint W: Double knuckle joint Various mounting bracket options Suitable mounting brackets can be selected for the installation condition. Improved amount of mounting freedom D: Double clevis : it of pivot bracket and double clevis : Single clevis : ead flange : asic V: Single knuckle joint : xial foot W: Double knuckle joint : it of pivot bracket and trunnion : Rod flange Reduced weight by changing the shape of the rod cover and head cover. eatures 1 : xial foot T: enter trunnion ore size ew ompared to stroke for each size Reduction rate 1% % % % % (kg) Existing model : it of pivot bracket and trunnion

3 est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units loating oints Rodless ylinders uto Switches est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units loating oints Rodless ylinders uto Switches est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units loating oints Rodless ylinders uto Switches est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units loating oints Rodless ylinders uto Switches est Pneumatics Table ylinders uide ylinders ock ylinders Specialty ylinders Stroke Reading ylinders est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units loating oints Rodless ylinders uto Switches est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units loating oints Rodless ylinders uto Switches est Pneumatics Standard ir ylinders ompact ir ylinders Water Resistant ylinders ir-hydro Units lamp ylinders Valve Mounted ylinders loating oints Rodless ylinders uto Switches Stopper ylinders Shock bsorbers uto Switches Series o substances hazardous to the environment are used. ead free bushing is used as sliding material. ompliant with EU RoS directive. Mounting dimensions are the same as the existing product. Piston rod lurching reduced Piston lurching is reduced by the construction which minimizes resistance in the air passage at startup. ushion ring When starting operation air Operating direction ushion seal Stroke Variations ore size Standard stroke ong stroke ( and only) 1 1 Series Variations Series Type ore size With rod boot Variations lean series Water resistant atalogs Standard ew Single rod Double rod,,, Page of this catalog Page 1 Standard Single rod Double rod,,, Ver.1 Ver.1 est Pneumatics Page est Pneumatics Page 3 on-rotating rod Single rod Double rod,, Ver.1 Ver.1 est Pneumatics Page 3 est Pneumatics Page Y Smooth ylinder Single rod 3 Ver.1 est Pneumatics Page 4 With end lock ir-hydro Double rod Single rod,,, Ver.1 Ver.1 est Pneumatics Page 3 est Pneumatics Page 3 Double rod Ver.1 est Pneumatics Page 3 eatures

4 ombinations of Standard Products and Made to Order Specifications Series : Standard : Made to Order : Special product (ontact SM for details.) : ot available Series ction/ Type Single rod (Standard) Double acting Double rod Symbol Standard Standard Specifications pplicable bore size D-Z uilt-in magnet ong st -Z ong stroke With rod boot (ylon tarpaulin) ø to ø -Z With rod boot (eat resistant tarpaulin) 5- ote 1) opper (u) and Zinc (Zn) free -X hange of rod end shape -X Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel -X djustable stroke cylinder/djustable extension type -X hange of trunnion bracket mounting position -X hange of tie-rod length -X Rod trunnion ote 1) or details, refer to the SM s website. ø to ø ront matter 1

5 With auto switch With auto switch (uilt-in magnet) D T Mounting asic xial foot Rod flange ead flange Single clevis Double clevis enter trunnion D D ore size mm mm mm mm mm ow to Order Z Z W MW racket 1 Without bracket Pivot bracket ylinder stroke or details, refer to the next page. (Example) D-Z pplicable uto Switches/Refer to page 3 to 11 in est Pneumatics o. for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Magnetic field resistant (-color indication) Diagnostic indication (-color indication) ir ylinder Standard: Double cting, Single Rod Series ø, ø, ø, ø, ø Electrical entry rommet Terminal conduit rommet rommet Terminal conduit DI terminal rommet Indicator light 4-wire (P) -wire (on-polar) 3-wire Yes (P equivalent) o Yes o Yes Wiring (Output) 3-wire (P) 3-wire (PP) -wire 3-wire (P) -wire 3-wire (P) Yes 3-wire (PP) -wire 3-wire (P) 3-wire (PP) -wire -wire 4 V il ylinder suffix Rod boot 4 V 4 V oad voltage D 5 V, 1 V 1 V 1 V 5 V, 1 V 1 V 5 V, 1 V 1 V 5 V, 1 V 5 V 1 V V, V V V or less V, V V or less V, V racket il V W uto switch model Tie-rod and mounting mounting M MP M MW MPW MW M MP M 5 P3DW P4DW W Without bracket Single knuckle joint Double knuckle joint uilt-in Magnet ylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. 5 5P W 5PW 5W W ead wire length (m).5 (il) 1 (M) 3 () Made to Order or details, refer to the next page. uto switch il Without auto switch or applicable auto switch model, refer to the table below. umber of auto switches il pcs. S 1 pc. 3 3 pcs. n n pcs. 5 (Z) Pre-wired connector Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. water resistant type cylinder is recommended for use in an environment which requires water resistance. ead wire length symbols:.5m il (Example) MW Solid state auto switches marked with are produced upon receipt of order. 1m M (Example) MWM 3m (Example) MW 5m Z (Example) MWZ Since there are other applicable auto switches then listed above, refer to page 3 for details. or details about auto switches with pre-wired connector, refer to pages and 1 in est Pneumatics o.. or the D-P3DW, refer to the catalog T.ES-1. The D-/M/P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-/M before shipment.) il Without ylon tarpaulin eat resistant tarpaulin RoS pplicable load I circuit I circuit I circuit I circuit I circuit Relay, P Relay, P P Relay, P 1

6 Series Specifications Made to Order Symbol -X -X -X -X -X -X IS Symbol Double acting ir cushion Made to Order (or details, refer to pages 5 to.) Specifications hange of rod end shape Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel djustable stroke cylinder/djustable extension type hange of trunnion bracket mounting position hange of tie-rod length Rod trunnion Refer to pages 1 to 3 for cylinders with auto switches. uto switch proper mounting position (detection at stroke end) and its mounting height Minimum stroke for auto switch mounting Operating range uto switch mounting brackets/part no. Ordering Example of ylinder ssembly ylinder model: DD-Z-W-MW Double knuckle joint luid ction Proof pressure Maximum operating pressure mbient and fluid temperature Minimum operating pressure Piston speed ushion Stroke length tolerance ubrication Mounting llowable kinetic When air cushion is activated energy () ote ) When air cushion is not activated ir Double acting 1.5 MPa 1. MPa Without auto switch: to ote 1) With auto switch: to ote 1).5 MPa to mm/s ir cushion Up to st : to st : to 1 st : +1. ot required (on-lube) asic, oot, Rod flange, ead flange Single clevis, Double clevis, enter trunnion or model with auto switch, also refer to Minimum Strokes for Standard Strokes/ uto Switch Mounting on pages 1 and. ore size,, ore size Standard stroke 5,, 5,,, 1, 5,,,, 3,, 4, 5,, 5,,, 1, 5,,,, 3,, 4,, 5,, 5,,, 1, 5,,,, 3,, 4,,, Intermediate strokes not listed above are produced upon receipt of order. ccessories..33 ote 1) With no freezing ote ) ctivate the air cushion when operating the cylinder. If this is not done, the piston rod assembly or the tie-rods will be damaged when the allowable kinetic energy exceeds the values shown in the table above. Rod oot Material Symbol Rod boot material ylon tarpaulin eat resistant tarpaulin Maximum ambient temperature for the rod boot Max. ambient temperature ong stroke ( and only) 1 ø: ø: 1 Mounting asic xial foot Rod flange ead flange Single clevis Double clevis enter trunnion Standard Rod end nut levis pin Single knuckle joint uto switch Pivot bracket Option Double knuckle joint (with pin) With rod boot Double knuckle joint Mounting D: Double clevis Pivot bracket : Yes Rod end bracket W: Double knuckle joint uto switch D-MW: pcs. Pivot bracket, double knuckle joint and auto switch are shipped together with the product, but not assembled. Minimum Stroke for uto Switch Mounting aution 1. The minimum stroke for mounting varies with the auto switch type and cylinder mounting type. In particular, the center trunnion type needs careful attention. (or details, refer to pages 1 and.)

7 ir ylinder Standard: Double cting, Single Rod Series Weights/luminum Tube Mounting rackets/part o. asic weight dditional weight per mm of stroke ore size asic xial foot lange Single clevis Double clevis Trunnion ll mounting brackets (kg) ore size xial foot lange Single clevis Double clevis D D D D When axial foot brackets are used, order two pieces per cylinder. clevis pin, flat washers and split pins are shipped together with double clevis D ccessories Single knuckle Double knuckle (with pin) alculation: Example) -Z (xial foot type, ø, stroke) asic weight.1 kg dditional weight./ stroke ylinder stroke stroke.1 +. x / = 1.31 kg llowable inetic Energy ø ø ø ø ø oad mass (kg) 1 Maximum speed (mm/s) (Example) ind the upper limit of rod end load when an air cylinder of ø is operated at mm/s. rom a point indicating mm/s on the axis of abscissas, extend a line upward and find a point where it intersects with a line for the mm bore size. Extend a line from the intersection to the left and find a load mass kg. 3

8 Series i q e y t!!4!5! u w!1! o!!3! omponent Parts o Description Rod cover ead cover ylinder tube Piston rod Piston ushion ring ushion ring ushing ushion valve Tie-rod Retaining ring Spring washer Tie-rod nut Wear ring ushion seal Rod seal Piston seal ushion valve seal ylinder tube gasket Piston gasket Rod end nut Material ote luminum die-casted Trivalent chromate luminum die-casted Trivalent chromate luminum alloy ard anodized arbon steel ard chrome plating luminum alloy luminum alloy nodized luminum alloy nodized earing alloy Steel wire Plating arbon steel Trivalent zinc chromate Spring steel Phosphate coating Steel wire Plating Rolled steel Plating Resin Urethane R R R R R O-ring Rolled steel Plating Replacement Parts/Seal it ore size it no. -Z-PS -Z-PS -Z-PS -Z-PS -Z-PS ontents Set of nos. above!5,!,!,! Seal kit includes!5,!,!,!. Order the seal kit based on each bore size. Do not disassemble the trunnion type. Refer to page. Seal kit includes a grease pack (ø, : g, ø, : g, ø: g). Order with the following part number when only the grease pack is needed. rease pack part number: R-S- ( g), R-S- ( g) 4

9 ir ylinder Standard: Double cting, Single Rod Series asic: 4 x Width across flats x P x ushion valve ød øe. f h Stroke 1 4 x x P x ushion valve When the stroke is 1 mm or longer, a tie-rod reinforcement ring is attached. ød øe øe RY øe 1 W S + Stroke + Stroke W M ore size Up to Up to Up to 5 1 D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 M ore size Up to Up to Up to M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 W Without rod boot d 5 e f With rod boot h ong stroke Width across flats. f h Stroke 1 1 RT S + Stroke + Stroke M ore size ore size 1 to 1 to 1 1 to 1 51 to 51 to 1 1 to 1 to 1 1 to 1 51 to 51 to 1 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ RT 45 D 5 RY E S Without rod boot M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet, consider the minimum stroke suitable to install the auto switches. ote 3) If the stroke of this cylinder exceeds the standard limit, buckling of the piston rod must be considered (e.g. use an external guide). d 5 e f With rod boot h 5 1 M Without reinforcement ring With reinforcement ring

10 Series xial oot: 1 4 x 1 x P x ushion valve ød øe Y øe 4 x. f h Stroke X Width across flats Y X S + Stroke S + Stroke + Stroke X Y T ore size Up to Up to Up to 5 1 D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 D S T X 4 5 ore size Up to Up to Up to Y 3 3 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 X 34 Y Without rod boot d 5 e With rod boot h 5 1 f ong stroke 1 4 x 1 x P x ushion valve When the stroke is 1 mm or longer, a tie-rod reinforcement ring is attached. ød øe Y øe Width across flats RY 4 x. f h Stroke X T Y X RT S + Stroke S + Stroke + Stroke X Y ore size ore size 1 to 1 to 1 1 to 1 51 to 51 to 1 1 to 1 to 1 1 to 1 51 to 51 to 1 M x 1. M x 1. M x 1. M x 1. M x P 1/4 1/ 1/ S 4 D 5 X 34 E Y RT RY 1 M 1.5 M 1.5 M 1.5 M1 1.5 M1 1.5 Without rod boot d 5 e D With rod boot h 5 1 ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet consider the minimum stroke suitable to install the auto switches. ote 3) If the stroke of this cylinder exceeds the standard limit, buckling of the piston rod must be considered (e.g. use an external guide). f S T X 4 5 Y 3 3

11 ir ylinder Standard: Double cting, Single Rod Series Rod lange: Width across flats x P x ushion valve 4 x 4 x ød øe øe V Y. f h Stroke Width across flats 1 1 T S + Stroke + Stroke M X Z ore size Up to Up to Up to 5 1 D 5 E D T 1 1 V X Y 4 5 Z M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 ore size Up to Up to Up to M M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 Without rod boot d 5 5 e With rod boot h 5 1 f or installing an air cylinder, when a hole must be made to accommodate the rod portion, make sure to machine a hole that is larger than the outside diameter of the boot mounting bracket ød. ong stroke Width across flats Width across flats 1 x P x ushion valve When the stroke is 1 mm or longer, a tie-rod reinforcement ring is attached. 4 x 4 x øe RY øe Y 1. f h Stroke T + Stroke RT S + Stroke M X Z ore size ore size 1 to 1 to 1 1 to 1 51 to 51 to 1 1 to 1 to 1 1 to 1 51 to 51 to 1 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ RT 45 ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet consider, the minimum stroke suitable to install the auto switches. ote 3) If the stroke of this cylinder exceeds the standard limit, buckling of the piston rod must be considered (e.g. use an external guide). D 5 RY E S D Without rod boot T 1 3 e X f Y Z 4 1 With rod boot h M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 M 1 1 or installing an air cylinder, when a hole must be made to accommodate the rod portion, make sure to machine a hole that is larger than the outer diameter of the boot øe.

12 Series ead lange: 4 x 1 4 x Width across flats x P x ushion valve V Y øe 1. f h Stroke X Z S + Stroke + Stroke T x P x ushion valve 4 x ød øe øe ød øe ore size Up to Up to Up to 5 1 D 5 E D T 1 1 V X Y 4 5 Z M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 ore size Up to Up to Up to M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 Without rod boot d 5 e With rod boot h 5 1 f Single levis: Width across flats. f h Stroke Width across flats 1 1 S + Stroke Z + Stroke + Stroke U RR X ore size Up to Up to Up to 5 1 D X D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x ore size Up to Up to Up to M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ RR 1 5 S 4 U Without rod boot Z d 5 e f With rod boot h 5 1 Z

13 ir ylinder Standard: Double cting, Single Rod Series Double levis: D Width across flats x P x ushion valve ole diameter: Shaft diameter: d 4 x X Z øe øe. f h Stroke 1 Width across flats 1 S + Stroke Z + Stroke + Stroke U RR øtde 1 4 x Z + 1/ Stroke Width across flats x P x ushion valve ød øe TY ød øe pin and retaining rings are shipped together with double clevis and/or double knuckle joint. ore size Up to Up to Up to 5 1 D X Z D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x ore size Up to Up to Up to M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ RR 1 5 S 4 U Without rod boot Z d 5 e f With rod boot h 5 1 Z clevis pin, flat washers and split pins are included. enter Trunnion: T. f h Stroke TX TZ 1 TT S + Stroke + Stroke ore size Up to Up to Up to 5 1 D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 ore size TDe TT TX Up to Up to Up to. 5.3 Do not disassemble the trunnion type. Refer to page. TY TZ Without rod boot Z d 5 e f With rod boot h 5 1 Z

14 Series Trunnion and Double levis Pivot racket Strength is the same as cylinder brackets. pplicable Series racket type pplicable series Trunnion pivot bracket Double clevis pivot bracket Please confirm SM at the time of mounting. ore size Description Trunnion pivot bracket -S4 -S M-S Double clevis pivot bracket Order trunnion pivot brackets per cylinder. Trunnion pivot bracket Material: ast iron TE TO TX TO Z + 1/ Stroke 4 x øtt 4 x øtr TY TY T TS øtd T T TU T TU T Part no. ore size T T TU T TX TE TO TR TT TS T T TY Z TD- (ole) -S4 -S M-S Double clevis pivot bracket Material: ast iron Z + Stroke DX DD 4 x T D D DS Rotating ngle ore size x R DU D D DU DO D DO DE to 1 Part no. ore size D D DU D DX DE DO DR DT DS D D Z DD (ole)

15 Series Dimensions of ccessories Y Type Double nuckle oint Shaft diameter: ole diameter: d otter pin lat washer: Polished round Material: ast iron Part no. Y-4D pplicable bore size 1 E1 4 D M x 1.5 R1 U1 5 D 1 X Z Split pin size ø3 x lat washer size Polished round 1 øe1 1 1 U1 Y-5D Y-D, 3 1 M x 1.5 M x ø3 x ø4 x 5 Polished round 1 Polished round RR1 Y-D 1 3 M x ø4 x Polished round knuckle pin, split pins and flat washers are included. levis Pin/nuckle Pin Material: arbon steel x ø ø Part no. DP- DP-3 DP-4 DP-5 DP- DP- pplicable bore size Dd levis nuckle...,, Split pins and flat washers are included m d Drill through Included split pin ø3 x ø3 x ø4 x 5 ø4 x 5 ø4 x ø4 x 3 Included flat washer Polished round Polished round 1 Polished round Polished round Polished round Polished round 4 I Type Single nuckle oint Rod End ut (Standard) ø ø X Z 1 1 RR1 Material: ree cutting sulfur steel Material: Rolled steel pplicable pplicable Part no. 1 E1 1 R1 U1 D X Part no. bore size bore size d D +..1 I M x I-5, 4 M x I M x T-4 T-5 T-, M x 1.5 M x 1.5 M x I- 5 3 M x T- M x

16 With auto switch With auto switch (uilt-in magnet) W DW T Double rod Mounting asic xial foot Rod flange enter trunnion uilt-in Magnet ylinder Model ore size mm mm mm mm mm ylinder stroke or details, refer to the next page. Z Z MW uto switch il or applicable auto switch model, refer to the table below. ylinder suffix One end rod boot oth ends rod boot Without auto switch il il Without rod boot ylon tarpaulin eat resistant tarpaulin Without rod boot ylon tarpaulin eat resistant tarpaulin If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the auto switch. When more than one symbol is to be specified, (Example) DW-Z indicate them in alphabetical order. pplicable uto Switches/Refer to page 3 to 11 in est Pneumalics o. for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Diagnostic indication (-color indication) Water resistant (-color indication) With diagnostic output (-color indication) Magnetic field resistant (-color indication) Diagnostic indication (-color indication) Electrical entry rommet Terminal conduit rommet rommet Terminal conduit DI terminal rommet 3-wire (P equiv.) Yes o Yes o Yes Wiring (Output) 3-wire (P) 3-wire (PP) -wire 3-wire (P) -wire 3-wire (P) Yes 3-wire(PP) -wire 3-wire (P) 3-wire (PP) -wire 4-wire (P) -wire (on-polar) -wire 4 V 4 V 4 V oad voltage D 5 V,1 V 1 V 1 V 5 V,1 V 1 V 5 V,1 V 1 V 5 V,1 V 5 V V V or less 1 V V, V V, V V or less V, V uto switch model Tie-rod mounting M MP M MW MPW MW M MP M 5 P3DW P4DW W and mounting 5 5P W 5PW 5W W ead wire length (m).5 (il) 1 (M) 3 () 5 (Z) Made to Order or details, refer to the next page. umber of auto switches il S 3 n Pre-wired connector pcs. 1 pc. 3 pcs. n pcs. pplicable load I circuit I circuit I circuit I circuit I circuit Water resistant type auto switches can be mounted on the above models, but in such case SM cannot guarantee water resistance. water-resistant type cylinder is recommended for use in an environment which requires water resistance. ead wire length symbols:.5 m il (Example) MW Solid state auto switches marked with are produced upon receipt of order. 1 m M (Example) MWM 3 m (Example) MW 5 m Z (Example) MWZ Since there are other applicable auto switches then listed above, refer to page 3 for details. or details about auto switches with pre-wired connector, refer to pages and 1 in est Pneumatics o.. or the D-P3DW, refer to the catalog T.ES-1. The D-/M/P3DW auto switches are shipped together, (but not assembled). (owever, auto switch mounting brackets are assembled for the D-/M before shipment.) 1 ir ylinder Standard: Double cting, Double Rod Series W ø, ø, ø, ø, ø ndicator light ow to Order RoS Relay, P Relay, P P Relay, P

17 ir ylinder Standard: Double cting, Double Rod Series W Specifications IS Symbol luid ction ore size Proof pressure Maximum operating pressure Minimum operating pressure Piston speed mbient and fluid temperature ushion Stroke length tolerance ubrication Mounting With no freezing ir Double acting 1.5 MPa 1. MPa. MPa to mm/s Without auto switch: to With auto switch: to ir cushion Up to st +1. : 51 to st +1.4 : ot required (on-lube) asic, xial foot, Rod flange, enter trunnion Made to Order Symbol -X -X -X -X ir cushion Made to Order (or details, refer to pages 5 to.) Minimum Stroke for uto Switch Mounting aution Specifications hange of rod end shape Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel hange of trunnion bracket mounting position hange of tie-rod length 1. The minimum stroke for mounting varies with the auto switch type and cylinder mounting type. In particular, the center trunnion type needs careful attention. (or details, refer to pages 1 and.) Refer to pages 1 to 3 for cylinders with auto switches. Minimum stroke for auto switch mounting uto switch proper mounting position (detection at stroke end) and its mounting height Operating range uto switch mounting brackets/part no. or model with auto switch, also refer to Minimum Strokes for Standard Strokes/ uto Switch Mounting on pages 1 and. ore size,, Intermediate strokes not listed above are produced upon receipt of order. Rod oot Material Symbol ccessories Standard stroke 5,, 5,,, 1, 5,,,, 3,, 4, 5,, 5,,, 1, 5,,,, 3,, 4,, 5,, 5,,, 1, 5,,,, 3,, 4,,, Rod boot material ylon tarpaulin eat resistant tarpaulin Maximum ambient temperature for the rod boot Standard Option Mounting Rod end nut Single knuckle joint Double knuckle joint (with pin) With rod boot asic Max. ambient temperature 1 The above brackets have the same dimensions as those for the standard double acting single rod series. Refer to page. Weights/luminum Tube (Steel Tube) asic weight dditional weight per mm of stroke ccessories ore size asic luminum tube xial foot luminum tube lange luminum tube Trunnion luminum tube ll mounting brackets luminum tube Single knuckle Double knuckle (with pin)..3. oot lange enter trunnion (kg) alculation: (Example) W-Z (xial foot type, ø, stroke) asic weight 1. (xial foot type, ø) dditional weight./ stroke ylinder stroke stroke x / = 1.4 kg..3 1.

18 Series W onstruction!!4 u q w e y! t!5!3! r!! i o!!1 omponent Parts o. Description 1 Rod cover ylinder tube 3 Piston rod 4 Piston rod 5 Piston ushion ring ushing ushion valve Tie-rod Retaining ring Spring washer 1 Tie-rod nut ushion seal Rod seal Piston seal ushion valve seal ylinder tube gasket Piston gasket 1 Rod end nut Material Qty. luminum die-casted luminum alloy 1 arbon steel 1 arbon steel 1 luminum alloy 1 luminum alloy earing alloy Steel wire arbon steel 4 Spring steel Steel wire Rolled steel Urethane R R 1 R R R 1 Rolled steel ote Trivalent chromate ard anodized ard chrome plating ard chrome plating nodized Plating Trivalent zinc chromate Phosphate coating Plating Plating O-ring Plating Replacement Parts/Seal it ore size it no. ir cylinder WZ-PS WZ-PS WZ-PS WZ-PS WZ-PS ontents Set of nos. above!3,!4,!5,! Do not disassemble the trunnion type. Refer to page. Seal kit includes!3,!4,!5,!. Order the seal kit based on each bore size. Seal kit includes a grease pack (ø, : g, ø, : g, ø: g). Order with the following part number when only the grease pack is needed. rease pack part number: R-S- ( g), R-S- ( g)

19 ir ylinder Standard: Double cting, Double Rod Series W asic: W 4 x Width across flats M x P x ushion valve M Width across flats øe øe S + Stroke + Stroke + x Stroke ød øe. f h Stroke ød øe øe ød. f f + Stroke. h + S + Stroke + + x Stroke h + + Stroke ore size Up to Up to Up to 5 1 D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 M M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x 1.5 ore size Up to Up to Up to 31 P 1/4 1/ 1/ S 4 Without rod boot With rod boot (Single side) (oth sides) d 5 e f h ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet, consider the minimum stroke suitable to install the auto switches.

20 Series W xial oot: W + Stroke 1 4 x 1 x P x ushion valve 1 øe øe Y X Width across flats Y X S + Stroke S + Stroke + x Stroke X 4 x T Y Width across flats ød øe. f h Stroke ore size Up to Up to Up to 5 1 D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 D S T X 4 5 ore size Up to Up to Up to Y 3 3 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 X 34 Y Without rod boot ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet, consider the minimum stroke suitable to install the auto switches. d 5 With rod boot (Single side) e f h (oth sides)

21 ir ylinder Standard: Double cting, Double Rod Series W Rod lange: W 4 x 1 4 x Width across flats x P x ushion valve M Width across flats V Y øe 1 1 X Z Width across flats 1 T S + asic type + Stroke + x Stroke ød øe. f h Stroke ore size ore size Up to Up to Up to Up to Up to Up to M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 D 5 E D T 1 1 V X Y 4 5 Z Without rod boot With rod boot (Single side) (oth sides) d 5 5 e f h ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet, consider the minimum stroke suitable to install the auto switches. 1 M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 M or installing an air cylinder, when a hole must be made to accommodate the rod portion, make sure to machine a hole that is larger than the outer diameter of the boot mounting bracket ød.

22 Series W enter Trunnion: WT øtde 1 4 x Width across flats Z + 1/ Stroke x P x ushion valve øe Width across flats TY øe 1 1 TX TT TZ S + Stroke + Stroke + x Stroke ød øe. f h Stroke ore size Up to Up to Up to 5 1 D 5 E M x 1.5 M x 1.5 M x 1.5 M1 x 1.5 M1 x 1.5 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x P 1/4 1/ 1/ S 4 TDe ore size ore size Up to Up to Up to TT 34 TX TY Do not disassemble the trunnion type. Refer to page. ote 1) Operating temperature range of model with built-in magnet: to ote ) or model with built-in magnet, consider the minimum stroke suitable to install the auto switches. TZ Without rod boot With rod boot (Single side) (oth sides) Z d 5 e f h 5 1 Z Z

23 Series uto Switch Mounting 1 uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight <and mounting> D-5//5W D-3 D-3/ uto switch 1/ (pplicable cable O.D.) ø. to ø. s s <Tie-rod mounting> D-/V D-M/MV D-MW/MWV D-M/MV D-5/ D-5W 33 D-Z/Z D-Y5/Y/YP/YPV D-YW/YWV D-Y s uto switch uto switch t t t t s D-5/5 D-5W/5W D-5 D-5/5T uto switch s D-3 D-3/ / (pplicable cable O.D.) ø. to ø. W s / (pplicable cable O.D.) ø. to ø.5 W s t s s D- 1/ (pplicable cable O.D.) ø. to ø.5 D-5/5 D-5T D-5W/5W D-5/5 uto switch t s t D- D-P3DW uto switch s t D-P4DW uto switch 1

24 Series uto Switch Mounting uto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting eight uto Switch Proper Mounting Position uto switch model ore size D-M D-MV D-MW D-MWV D-M D-MV D- D-V D D-Y5 D-Y D-YP D-YPV D-YW D-YWV D-Y D-Z D-Z D-5W ote) djust the auto switch after confirming the operating conditions in the actual setting D-P3DW D-P4DW D-5 D-5 D-5 D-5W D-5W D-5 D-5W D-5T D-3 D-3 D-3 D-3 D-5 D- D-3 D-3 D- D- D-5 D-5 D-5T D-5W D-5W D-5 D-5 D-5 D uto Switch Mounting eight uto switch model ore size D- D-M D-V D-MW D-M s t D-5 D- D-5 D-Z D-5W D-5 D-Z D-5 D-MV D-Y D-3 D-5 D-5W D-3 D-Y5 D-5 D-MWV D-YPV D-P3DW D-P4DW D-3 D- D- D-5W D-3 D-YP D-5T D-MV D-YWV D-3 D-5W D-5 D-3 D-Y D-5W D-5 D-YW D-5W D-5T D-5 D- D-5 s t s t s t s t s t s t s s s s t s t s t s t

25 uto Switch Mounting Series Minimum Stroke for uto Switch Mounting uto switch model D-5/ D-5/5 D-5W/5W D-5/5 umber of auto switches (Different surfaces and same surface) 1 rackets other than center trunnion (Different surfaces and same surface) 1 D- (n ) + n (n =, 4,, ) (Different surfaces and same surface) 1 D-V (n ) + n (n =, 4,, ) (Different surfaces and same surface) 1 D-M (n ) D-MW + n (n =, 4,, ) (Different surfaces and same surface) 1 D-MV (n ) D-MWV + n (n =, 4,, ) D-M D-MV D-5W D-5T D-5/ D-5/5 D-5W D-5W D-5 D-5 D-5T D-5W D-3 D-3 D-3 (Different surfaces and same surface) 1 n: umber of auto switches (n ) + 55 n (Same surface) (n ) + Different surfaces (n =, 4,, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) (n =, 4,, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) (Different surfaces and same surface) n (Same surface) (n ) (n =, 4,, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) (Different surfaces and same surface) n (Same surface) (n ) (n =, 4,, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) Different surfaces Same surface 5 1 Different surfaces (n ) (n =, 4,, ) (n = 4,, 1, ) (n = 4,, 1, ) (n = 4,, 1, ) Same surface 5 + (n ) + (n ) + (n ) 1 + (n ) (n =, 3, 4 ) (n =, 4,, ) (n =, 4,, ) (n =, 4,, ) 1 1 Different surfaces Same surface 5 1 5n (Different surfaces and same surface) 1 n Same 1 Different surfaces Same surface Different surfaces surfacesame surface (n ) + (n =, 4,, ) (n ) + (n =, 4,, ) 5 + (n ) (n =, 3, 4 ) + (n ) (n =, 3, 4 ) + (n ) (n =, 3, 4 ) 1 enter trunnion ø ø ø ø ø (n = 4,, 1, ) + (n = 4,, 1, ) + (n = 4,, 1, ) (n = 4,, 1, ) + (n = 4,, 1, ) + (n = 4,, 1, ) + (n ) (n =, 4,, ) (n ) (n =, 4,, ) 5 + (n = 4,, 1, ) 55 + (n = 4,, 1, ) + (n ) (n =, 4,, ) + (n ) (n =, 4,, ) 5 + (n = 4,, 1, ) + (n = 4,, 1, ) (n ) (n =, 4,, ) + (n ) (n =, 4,, ) + (n = 4,, 1, ) (n = 4,, 1, ) + (n = 4,, 1, ) + (n = 4,, 1, ) (n = 4,, 1, ) + (n = 4,, 1, ) 5 + (n = 4,, 1, ) (n = 4,, 1, ) + (n = 4,, 1, ) 1 + (n ) (n =, 4,, ) 5 + (n = 4,, 1, ) + (n = 4,, 1, ) 5 + (n = 4,, 1, ) + (n = 4,, 1, ) (n = 4,, 1, ) 1 1

26 Series uto Switch Mounting 3 Minimum Stroke for uto Switch Mounting D- D-3 D-3 D-3 D- D-Z/Z D-Y5/YP D-YW D-Y/YPV D-YWV D-Y D-P3DW D-P4DW 1 Different surfaces Same surface 5 Different surfaces + (n ) 5 + (n ) + (n ) (n =, 3, 4 ) (n =, 4,, ) (n =, 4,, ) Same surface + (n ) + (n ) (n =, 3, 4, 5 ) (n =, 4,, ) Different surfaces Same surfacedifferent surfaces Same surface 1 5 (Different surfaces and same surface) 1 n (Different surfaces and same surface) 1 n (Different surfaces and same surface) 1 n (Different surfaces and same surface) 1 n (Different surfaces and same surface) 1 Operating Range uto switch model D-/V D-M/MV D-MW/MWV D-M/MV D-Z/Z D-3/ D-3/ D-5/ D-5/ D-5W D-5W 5umber of auto switches Different surfaces Same surface Different surfaces Same surface n (n ) (n =, 3, 4 ) 55 + (n ) (n =, 3, 4 ) + (n ) (n =, 3, 4 ) 55 + (n ) (n =, 3, 4 ) 5 + (n ) (n =, 4,, ) 5 + (n ) (n =, 4,, ) 5 5 (n ) (n =, 4,, ) (n = 4,, 1, ) (n = 4,, 1, ) (n ) + + (n =, 4,, ) (n = 4,, 1, ) (n ) (n =, 4,, ) (n = 4,, 1, ) + (n ) (n =, 4,, ) + (n ) (n =, 4,, ) + (n = 4,, 1, ) 5 + (n = 4,, 1, ) + 45 (n = 4,, 1, ) 5 + (n = 4,, 1, ) 5 + (n = 4,, 1, ) (n = 4,, 1, ) + (n ) (n =, 4,, ) + (n ) (n =, 4,, ) + (n ) (n =, 4,, ) (n = 4,, 1, ) + (n = 4,, 1, ) (n ) (n =, 4,, ) (n = 4,, 1, ) (n ) (n =, 4,, ) (n = 4,, 1, ) ore size enter trunnion ø ø ø ø ø (n ) (n =, 4,, ) 5 + (n ) (n =, 4,, ) uto switch model D-Y5/Y D-YP/YV D-YW/YWV D-Y D-5/5/5W D-5W/5 D-5T/5 D-5/5/5W D-5W/5 D-5T/5 D-5 D-3/3 D-3/3 D-P3DW D-P4DW + (n ) (n =, 4,, ) + (n ) (n =, 4,, ) 1 + (n = 4,, 1, ) + (n ) (n =, 4,, ) + (n ) (n =, 4,, ) 1 + (n = 4,, 1, ) ore size (n = 4,, 1, ) n: umber of auto switches Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately % dispersion) and may change substantially depending on the ambient environment. uto switch model rackets other than center trunnion

27 uto Switch Mounting Series uto Switch Mounting rackets/part o. <Tie-rod mounting> uto switch model D-/V D-M/MV D-MW/MWV D-M/MV D-5/ D-5W D-5/5 D-5W/5W D-5/5T D-3/ D-3/3 D-Z/Z D-Y5/Y D-YP/YPV D-YW/YWV D-Y ore size T T T T T D-P3DW M-S M-S T-S T-S T-S D-P4DW P- P- P- P- P- <and mounting> uto switch model D-3/ D-3/3 D-5/ D-5W D-5/5 D-5W/5W D-5 D-5T D-5 ore size DS-4M - DS-5M 5- M1- - M1- - M1- - ote 1) uto switch brackets are included in the D-3//3/3 types. Specify the part number as follows depending on the cylinder size when ordering. (Example) ø: D-3-4, ø: D-3-5, ø: D-3-, ø: D-3-, ø: D-3- [Stainless Steel Mounting Screw] The following stainless steel mounting screw kit (including set screws) is also available. Use it in accordance with the operating environment. (Since the auto switch mounting bracket is not included, order it separately.) 1: or D-5//5/5 types 3: or D-5//5/5 types ote ) Refer to pages 1 and in est Pneumatics o. for details on the 1 and 3. The above stainless steel screws are used when a cylinder is shipped with D-5 or 5 auto switches. When only an auto switch is shipped independently, the 1 or 3 is attached. ote 3) When using the D-M(V) or Y, do not use the steel set screws which are included with the auto switch mounting brackets above (-, 4-). Order a stainless steel screw kit (1) separately, and use the M4 x stainless steel set screws included in the 1. ote 4) There is a difference in the cylinder tube thickness depending on the cylinder model. When a band mounting type is used as an applicable auto switch and a cylinder model is changed, use caution. The figure shows the mounting example for the D-(V)/M(V)/MW(V)/M(V) types. Other than the applicable auto switches listed in ow to Order, the following auto switches can are mountable. Refer to est Pneumatics o. for detailed specifications. Type Reed Solid state D-3V/V D-V D-53/5/53/Z3/Z D-/Z D-MV/MPV/MV D-Y/Y/YPV D-MWV/MPWV/MWV D-YWV/YPWV/YWV D-MV/MPV/MV D-Y5/Y5/YP D-5/5P/5 D-YW/YPW/YW D-5W/5PW/5W D-5/Y D-5T/5T D-P5DW Model Electrical entry rommet (Perpendicular) rommet (In-line) rommet (Perpendicular) rommet (In-line) eatures With pre-wired connector is also available for solid state auto switches. or details, refer to pages and 1 in est Pneumatics o.. ormally closed ( = b contact) solid state auto switches (D-//Y/Y) are also available. or details, refer to pages 1 and 1 in est Pneumatics o.. Wide range detection type, solid state auto switch (D-5) is also available. or details, refer to page 1 in est Pneumatics o.. Without indicator light Without indicator light Diagnostic indication (-color indication) Water resistant (-color) Diagnostic indication (-color indication) Water resistant (-color) With timer Magnetic field resistant (-color) 3

28 Prior to Use uto Switch onnection and Example Sink Input Specifications Source Input Specifications 3-wire, P rown Input 3-wire, PP rown Input uto switch lack uto switch lack lue OM (P internal circuit) lue OM (P internal circuit) -wire rown Input -wire rown OM uto switch uto switch lue lue OM Input (P internal circuit) (P internal circuit) onnect according to the applicable P input specifications, as the connection method will vary depending on the P input specifications. Example of D (Series) and OR (Parallel) onnection 3-wire, D connection for P output (Using relays) (Performed with auto switches only) rown rown Relay oad lack lack Relay uto switch 1 uto switch 1 lue lue 3-wire, OR connection for P output uto switch 1 rown lack lue Relay rown rown rown uto switch lack uto switch lack uto switch lack lue lue lue 3-wire, D connection for PP output (Using relays) rown Relay lack uto switch 1 lue rown (Performed with auto switches only) rown lack uto switch 1 lue rown 3-wire, OR connection for PP output uto switch 1 rown lack lue rown uto switch lack lue oad uto switch lackrelay lue uto switch lack lue Relay -wire, D connection rown uto switch 1 uto switch lue rown lue oad oad voltage at O = Power supply voltage Residual voltage x pcs. = 4 V 4 V x pcs. = V Example: Power supply is 4 VD uto switch internal voltage drop 4 V 4 When two auto switches are connected in series, malfunction may occur because the load voltage will decrease in the O state. The indicator lights will light up when both of the auto switches are in the O state. -wire, D connection rown uto switch 1 uto switch lue rown lue oad oad voltage at O = eakage current x pcs. x oad impedance = 1 m x pcs. x 3 k = V Example: oad impedance is 3 k. uto switch leakage current 1 m (Solid state) When two auto switches are connected in parallel, malfunction may occur because the load voltage will increase in the O state. (Reed) ecause there is no leakage current, the load voltage will not increase in the O state. owever, depending on the number of auto switches in the O state, the indicator lights may sometimes grow dim or not light up, due to the dispersion and reduction of the current flowing to the auto switches.

29 Simple Specials -X to -X: hange of Rod End Shape These changes are dealt with Simple Specials System. Refer to est Pneumatics o. for details. hange of Rod End Shape Symbol -X to -X pplicable Series Series Description Model ction ote Double acting, Single rod ir cylinder W Double acting, Double rod 1. SM will make appropriate arrangements if no dimension, tolerance, or finish instructions are given in the diagram.. Standard dimensions marked with will be as follows to the rod diameter (D). Enter any special dimension you desire. Precautions D D 1 mm, < D 5 D mm, D > 5 D 4 mm 3.In the case of double rod type and single acting retraction type, enter the dimensions when the rod is retracted. 4.Only the single side of a double rod is able to manufacture. Symbol: Symbol: 1 Symbol:.5 Symbol: 3 Symbol: 4 Symbol: 5 Symbol: Symbol: ørd W ørd Symbol: Symbol:.5 file chamfer Symbol: Symbol: T W W1 Symbol: 1 Symbol: Symbol: Symbol:.5 R sphere R sphere T W1 TP R sphere T W1 Symbol: Symbol: Symbol: Symbol: 1 Symbol: Symbol: 1 Symbol: Symbol: 3 ørd T Symbol: 4 Symbol: 5 Symbol: Symbol: T W Symbol: Symbol: Symbol: W T W T 5

30 Series Simple Specials These changes are dealt with Simple Specials System. hange of Trunnion racket Mounting Position Symbol -X The position for mounting the trunnion bracket on the cylinder can be moved from the standard mounting position to any desired position. pplicable Series Series Description Model ction ote Double acting, Single rod ir cylinder W Double acting, Double rod Z + 1/ Stroke = Trunnion position for -X ore size Symbol or -X 3 1 Trunnion position for -X or -X + Stroke + Stroke 1 + Stroke 3 + Stroke + Stroke Z + 1/ Stroke or -X Minimum Maximum Stroke Stroke Stroke Stroke Stroke Precautions 1. Specify Z + 1/ Stroke in the case the trunnion bracket position is not -X, or trunnion is not a center trunnion.. SM will make appropriate arrangements if no dimension, tolerance, or finish instructions are given in the diagram. 3. The possible range of trunnion bracket mounting position is indicated in the table below. 4. Some trunnion mounting positions do not allow auto switch mounting. Please consult with SM for more information. Reference Standard (enter trunnion) 3 + 1/ Stroke 3 + 1/ Stroke + 1/ Stroke 1 + 1/ Stroke 1 + 1/ Stroke Minimum stroke hange of Tie-rod ength Symbol -X ylinder with M dimension for tie-rod length changed from the standard length. pplicable Series Series Description Model ction ote Double acting, Single rod ir cylinder W Double acting, Double rod M = M = Precautions 1. To order, specify the M dimension as well as the part number.. SM will make appropriate arrangements if no dimension, tolerance, or finish instructions are given in the diagram. 3. Tie-rod length changeable range is described in the below. 4. The M dimension of the bracket mounting side of flange (, ), clevis (, D) types cannot be specified. Tie-rod ength hangeable Range ore size M Min. M Max. ll bore size

31 Series Made to Order 1 Please contact SM for detailed dimensions, specifications and lead times. Made to Order 1 Tie-rod, ushion Valve, Tie-rod ut, etc. Made of Stainless Steel Symbol -X When using in locations where the rust generation or corrosion likelihood exists, the standard parts material have been partly changed to the stainless steel. pplicable Series Series Description Model ction ote Double acting, Single rod ir cylinder W Double acting, Double rod ow to Order Standard model no. X Tie-rod, cushion valve, tie-rod nut, etc. made of stainless steel Specifications omponent parts changed to stainless steel dditional specifications Dimensions Tie-rod, Tie-rod nut, Mounting bracket nut, Spring washer, ushion valve, ock nut Same as standard type Same as standard type djustable Stroke ylinder/djustable Extension Type It adjusts the extending stroke by the stroke adjustable mechanism equipped in the head side. (fter the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.) Symbol -X pplicable Series Series Description Model ction ote ir cylinder Double acting, Single rod ow to Order Mounting ore size Stroke Suffix Stroke adjustment symbol Except head flange and clevis types Specifications Series -Z Stroke adjustment symbol Stroke adjustment range to 5 to ote) Specifications other than above are the same as the standard type. Warning djustable stroke cylinder/djustable extension type 1. When the cylinder is operating, if something gets caught between the stopper bracket for adjusting the stroke and the cylinder body, it could cause bodily injury or damage the peripheral equipment. Therefore, take preventive measures as necessary, such as installing a protective cover. Dimensions (Dimensions other than below are the same as the standard type.) Precautions Z X.To adjust the stroke, make sure to secure the wrench flats of the stopper bracket by a wrench, etc. before loosening the lock nut. If the lock nut is loosened without securing the stopper bracket, be aware that the area that joins the load to the piston rod or the area in which the piston rod is joined with the load side and the stopper bracket side could loosen first. It may cause an accident or malfunction. Width across flats M M ømi Dimensions Symbol ore size ø ø ø ø ø + x Stroke + djustment 4 M + djustment Stroke M M + Stroke + djustment Width across flats M M M MI M Up to Up to Up to 5 1 M x 1.5 M x 1.5 M x 1.5 M x 1.5 M x M 4 4

32 Series Made to Order Please contact SM for detailed dimensions, specifications and lead times. Made to Order 3 Rod Trunnion Symbol -X This cylinder shortens the distance between the fulcrum and the rod end by installing a trunnion bracket in front of the rod cover. pplicable Series Series Description Model ction ote ir cylinder Double acting, Single rod ow to Order T Standard model no. Trunnion bracket X Rod trunnion Specifications: Same as standard type Dimensions (Dimensions other than below are the same as the standard type.) Z TY øtde TT n + Stroke S + Stroke TX TZ Dimensions Symbol ore size ø ø ø ø ø n S TDe TT TX TY Up to Up to Up to Up to Up to TZ Z

33 Series Specific Product Precautions e sure to read before handling. Refer to back cover for Safety Instructions, andling Precautions for SM Products (M-E3-3) and the Operation Manual for ctuator Precautions and uto Switch Precautions. Please download it via our website, aution Operating Precautions 1. Do not open the cushion valve beyond the stopper. retaining ring is installed as a cushion valve retention mechanism. Do not open the cushion valve beyond it. If not operated in accordance with the above precautions, the cushion valve may be ejected from the cover when air pressure is supplied.. Use the air cushion at the end of cylinder stroke. Otherwise, the tie-rod or piston rod assembly will be damaged. aution 1. Do not use a pneumatic type as an air-hydro cylinder. It can cause oil leakage.. Do not rotate the piston rod when the rod boot is fixed. efore rotating the piston rod, loosen the band to avoid twisting the rod boot. 3. Install the rod boot with the breathing hole facing downwards or in a direction suitable to prevent dust, moisture etc. from entering easily into the rod boot. aution Disassembly/Replacement. Do not replace the bushing. s the bushing is press-fit into the cover, replace the cover assembly when the bushing must be replaced. 3. When a seal is replaced, apply grease to the new seal before it is assembled. Operation of the cylinder without greasing will result in extreme abrasion of the seal, causing premature air leakage. 4. Do not disassemble the trunnion type cylinder, as it requires accuracy in assembly. The trunnion type cylinder may lose dimensional accuracy and malfunction when it is disassembled and reassembled because the axial center of the trunnion and that of the cylinder will not be aligned easily. uto Switch Mounting and Selection 1. The D series cylinders vary in their bore sizes because of difference in the thickness of their tube walls among different models. The part number of the auto switch mounting band thus varies depending on the cylinder type. When an auto switch mounting band is ordered alone, check the cylinder type and refer to the table below. <ylinder model> Standard: D/DW aution Disassembly/Replacement 1. Use a socket wrench when the bracket is replaced. If other tools are used, the nut or other parts may be deformed or the work efficiency may decrease. or applicable sockets, refer to the table below. uto switch model (and mounting) D-3/ D-3/3 D-5/ D-5W D-5/5 D-5W/5W D-5 D-5T DS-4M - and part no. ylinder bore size DS-5M M1- M1- M ore size,, ut D IS 1 lass 3 Intermediate M 1.5 D IS 1 lass 3 Intermediate M 1.5 D1 IS 1 lass 3 Intermediate M1 1.5 Width across flats 1 Socket IS 4 + Two-angle socket IS 4 + Two-angle socket IS 4 +Two-angle socket 1 Tightening torque ( m).4