Catalog Number 1NO-1NC 5 XTPAXSA11 5 XTPAXSAC

Transcription

1 -148 March 008 Accessories Auxiliary Contacts Side-Mount Auxiliary Contacts Can be fitted on the right side of manual motor protectors (XTPB, XTPR, XTPM) and manual transformer protectors (XTPT) and can be combined with XTPAXSATR and XTPAXFA trip indicating auxiliary contact. Table Side-Mount Auxiliary Contacts Contact Configuration Contact Sequence Screw Terminals Spring Cage Terminals 1NO-1NC 5 XTPAXSA11 5 XTPAXSAC11 L1 L L3 XTPAXSA NO-NC 5 XTPAXSA1 NO-1NC 5 XTPAXSA1 L1 L L3 XTPAXSA1 Front-Mount Auxiliary Contacts L1 L L3 XTPAXSA Can be fitted to manual motor protectors (XTPB, XTPR, XTPM) and manual transformer protectors (XTPT). 45 mm (XTPR B and XTPB) or 55 mm (XTPR D) widths of manual motor protectors remain unchanged. Table Front-Mount Auxiliary Contacts Contact Configuration Contact Sequence Screw Terminals Spring Cage Terminals 1NO-1NC 5 XTPAXFA11 L1 L L3 XTPAXFA11 1NO-0NC 5 XTPAXFA 5 XTPAXFAC L1 L L3 XTPAXFA 0NO-1NC 5 XTPAXFAC L1 L L3 XTPAXFAC Discount Symbol CD7 CA08001E

2 March Side-Mount Trip Indicating Auxiliary Contacts Can be fitted on the right side of manual motor protectors. Can be combined with standard auxiliary contacts. Trip indication: A. General Trip indication (overload) B. Short-circuit trip. Local short-circuit indication by red indicator, manually resettable. Table Side-Mount Trip Indicating Auxiliary Contacts Contact Configuration Contact Sequence x 1NO XTPB, XTPR, XTPM, XTPT XTPAXSATR On/Off L1LL3 + > Trip + L1LL3 + > x 1NC XTPB, XTPR, XTPM, XTPT XTPAXSATR On/Off L1LL3 + > Trip + L1LL3 + > Early-Make Front-Mount Auxiliary Contacts XTPBXFAEM0 XTPAXFAEM0 For use with XTPB, B-Frame XTPR and XTPT. Can be fitted to the front of a manual motor protector. 45 mm width of manual motor protector remains unchanged. For early energization of undervoltage release, e.g. in Emergency-Stop circuits to EN Table Early-Make Front-Mount Auxiliary Contacts Contact Configuration Contact Sequence NO 5 XTPB XTPBXFAEM NO XTPR, XTPM, XTPT XTPAXFAEM Not for use with rotary handle mechanism. Discount Symbol CD7 CA08001E

3 -150 March 008 Shunt Release C1 Current Limiter Contact Sequence Can be used to trip the manual motor protector from a remote location. Can be fitted on the left side of manual motor protectors. Cannot be combined with the XTPAXUVR. DC: Intermittent operation 5 sec. Table Shunt Release Screw Terminals XTPAXSR4V50H XTPAXSR48V50H XTPAXSR1V50H XTPAXSRV60H XTPAXSR08V60H XTPAXSR0V50H XTPAXSR30V50H XTPAXSR40V50H XTPAXSR40V60H XTPAXSR380V50H XTPAXSR400V50H XTPAXSR415V50H XTPAXSR440V60H XTPAXSR480V60H XTPAXSR4VDC XTPAXSR48VDC XTPAXSR60VDC XTPAXSR1VDC XTPAXSR15VDC XTPAXSR0VDC XTPAXSR50VDC Undervoltage Release Spring Cage Terminals XTPAXSRC30V50H XTPAXSRC4VDC Can be used to trip the manual motor protector from a remote location. Can be fitted on left side manual motor protectors. Cannot be combined with XTPAXSR. When combined with a circuit breaker, it can be used as Emergency- Stop device to IEC/EN Table Undervoltage Release Screw Terminals XTPAXUVR4V50H XTPAXUVR4V60H XTPAXUVR48V50H XTPAXUVR60V50H XTPAXUVR1V50H XTPAXUVRV60H XTPAXUVR08V60H XTPAXUVR0V50H XTPAXUVR30V50H XTPAXUVR40V50H XTPAXUVR40V60H XTPAXUVR380V50H XTPAXUVR400V50H XTPAXUVR415V50H XTPAXUVR440V60H XTPAXUVR480V60H XTPAXUVR600V60H Spring Cage Terminals XTPAXUVRC30V50H C D1 U D Contact Sequence The enhances the switching capacity of the XT manual motor protectors. It can be used with the XTPB, XTPR...BC1, XTPR...DC1 for individual or group protections. The rated uninterrupted current is 63A for IEC and 5A for UL/CSA. It can be mounted next to or behind the manual motor protector. See Tables -17 and -18 for ratings when using the current limiter. Table Current Limiter Contact Sequence To enhance the switching capacity of non- L 1 inherently safe 5A Manual Motor Protectors to 150 ka/ T 440V Max. rated operation voltage Ue = 690V, rated uninterrupted current I u = 63A. Can be used for individual and group protection. For group protection and in combination with the XTPR D, order additional XTPAXIT incoming terminal if required. Mounting next to or behind the manual motor protector A XTPR...D: 0 ka/400v, ka/690v. Lockable Rotary Handle Table Replacement Lockable Rotary Handle Lockable Rotary Handle that mounts 5 XTPAXLRH directly to the XTPR manual motor protectors. Comes standard with XTPR. U.S. $ Discount Symbol CD7 CA08001E

4 March Rotary Handle Mechanism Table Rotary Handle Mechanism Complete Kits Includes Handle, Shaft, and Required Hardware Separate Parts Rotary Handle Mech Black For use on main switches to IEC/EN Rotary Handle Mech Red/Yellow For use on main switch with Emergency-Stop function to IEC/EN Rotary Handle Mech Black For use on main switches to IEC/EN 6004 where XTPR is mounted 90 from vertical. Rotary Handle Mech Red/Yellow For use on main switch with Emergency-Stop function to IEC/EN 6004 where XTPR is mounted 90 from vertical. Rotary Handle Only Black For use on main switches to IEC/EN Rotary Handle Only Red/Yellow For use on main switch with Emergency-Stop function to IEC/EN Rotary Handle Only Black For use on main switches to IEC/EN 6004 where XTPR is mounted 90 from vertical. Rotary Handle Only Red/Yellow For use on main switch with Emergency-Stop function to IEC/EN 6004 where XTPR is mounted 90 from vertical. 1 XTPAXRHMB 1 XTPAXRHMRY 1 XTPAXRHM90B 1 XTPAXRHM90RY XTPAXRHB XTPAXRHRY XTPAXRH90B XTPAXRH90RY Shaft Only Includes Shaft to mount to XTPR, 175 mm length. XTPAXRHMSFT Shaft Only Includes Shaft to mount to XTPR, 7 mm length, minimum 50 pcs. Bulk Pack. Shaft Only Includes Shaft to mount to XTPR, 98 mm length, minimum 50 pcs. Bulk Pack. 50 XTPAXRHMSFTB7 50 XTPAXRHMSFTB98 Plug-in connection shafts, XTPAXRHMSFT_ can be cut to desired length for mounting depths of 0 40 mm. Carrier with extension shaft included. With ON/OFF switch position and + (tripped), lockable with 3 padlocks, 4 8 mm hasp. Can be locked in the ON position, if required. Rotary Handle Mechanisms ship with door interlock disabled. See instruction publication with product for how to enable door interlock. Not for use with XTPAXFAEM0 early-make front mount auxiliary contact. Sealing Facility Table -19. Sealing Facility To prevent tampering with the overload release and the test function. It can be sealed using industry standard sealing wire. For use with XTPR manual motor protectors. 5 XTPAXSW Discount Symbol CD7 CA08001E

5 -15 March 008 Three-Phase Commoning Links Frame B Frame D For parallel power feed to several manual motor protectors on terminals 1, 3 and 5. Table Three-Phase Commoning Links Frame B MMP with no side mounted auxiliaries or voltage releases MMP Length of Link (mm) Unit Width (mm) KA KA KA KA5 Each MMP with one auxiliary contact or trip-indicating auxiliary contact fitted on the right KB KB KB KB5 Frame D Each MMP with an auxiliary contact and trip-indicating auxiliary contact mounted on the right or a voltage release mounted on the left. MMP with no side mounted auxiliaries or voltage releases KC KC KAD KA3D KA4D Each MMP with one auxiliary contact or trip-indicating auxiliary contact fitted on the right KBD KB3D KB4D Each MMP with an auxiliary contact or trip-indicating auxiliary contact mounted on the right or a voltage release mounted on the left KCD KC4D Protected against accidental contact. B-Frame short circuit proof Ue = 690V, Iu = 63A; D-Frame short circuit proof Ue = 690V, Iu = 18A. Frame B links can be combined by rotating mounting. Frame D links cannot be combined. Discount Symbol CD7 CA08001E

6 March Shroud for Unused Commoning Link Terminals Table Shroud for Unused Terminals of Three-Phase Commoning Links B-Frame XTPR D-Frame XTPR To cover unused terminals on three-phase commoning link. Protected against direct contact. 0 XTPAXUTS XTPAXUTSD Incoming Terminal for Three-Phase Commoning Link Table Incoming Terminal B-Frame XTPR, XTPB 5 XTPAXIT For three-phase commoning link, protected against accidental contact, Ue = 690V, Iu = 63A; For conductor cross-sections:.5 5 mm stranded;.5 16 mm flexible with ferrules, AWG Line-Side Adapter Table Line-Side Adapter B-Frame XTPR to create a UL 508 Type E/F Manual Combination Starter 5 XTPAXLSA D-Frame XTPR to create a UL 508 Type E/F Manual Combination Starter 1 XTPAXLSAD XTPAXLSA is for three-phase commoning link, finger- and back-of-hand proof, Ue = 690V, Iu = 60A for conductor cross sections:.5 5 mm stranded,.5 16 mm flexible with ferrule, AWG XTPAXLSAD cannot be combined with three-phase commoning links. Discount Symbol CD7 CA08001E

7 -154 March 008 Combination Connection Kits Table Combination Connection Kits Non-reversing Starters XTPR...B + XTCE...B Mechanical connection element for XTPR...B and contactor Main current wiring between XTPR...B and contactor in tool-less plug connection Cable guidance Use contactor auxiliary switch XTCEXFAT_. Control cable guidance: max. 6 cables up to.5 mm external diameter or 4 cables up to 3.5 mm external diameter. Std. Pack 1 XTPAXTPCB XTPR...B + XTCE...C 1 XTPAXTPCC XTPR...D + XTCE...D DIN rail adapter plate 1 XTPAXTPCD Main current wiring between XTPR and contactor U.S. $ Reversing Starters XTPR...B + XTCE...B01_ XTPR...B + XTCE...C Mechanical connection element for XTPR...B and contactor Reversing starter main current wiring in tool-less plug connection Control cables for electrical interlocking in toolless plug connection: K1M: A1 KM: 1 K1M: 1 KM: A1 K1M: A KM: A Cable guidance Use contactor auxiliary switch XTCEXFAT_. Control cable guidance: max. 6 cables up to.5 mm external diameter or 4 cables up to 3.5 mm external diameter. DIN rail adapter plate Reversing starter main current wiring 1 XTPAXTPCRB 1 XTPAXTPCRC Star-Delta Starter Sets XTPR...B + XTCE...B DIN rail adapter plate Main current wiring between XTPR...B and contactor Electrical interlock between delta and star contactor Use as contactor auxiliary switch XTCEXFAT_ 1 XTPAXSDSB XTPR...B + XTCE...C DIN rail adapter plate Main current wiring between XTPR...B and contactor 1 XTPAXSDSC Discount Symbol CD7 CA08001E

8 March Combination Connection Kits Table Combination Connection Kits (Continued) Electrical Connection Module DIN Rail Adapter Plates XTPR...B + XTCE...C XTPR...D + XTCE...D XTPAXTPCB XTPAXTPCRB Main current wiring between XTPR...B and contactor Use only in combination with busbar adapter Main current wiring between XTPR...D and contactor Use only in combination with busbar adapter 45 mm wide adapter plate with one DIN rail Connection element for side-by-side positioning of further plates Std. Pack 5 XTPAXECMC 5 XTPAXECMD 4 XTPAXTPCPB XTPR...B + XTCE...C XTPAXECMC 45 mm wide adapter plate with two DIN rails Connection element for side-by-side positioning of further plates 4 XTPAXTPCRPB XTPAXECMD XTPR...D + XTCE...C XTPR...D + XTCE...D 55 mm wide adapter plate with two DIN rails Connection cams for further plates For use with reversing and star-delta starters 4 XTPAXTPCPD Lateral Module Connection Element Can be grouped on the DIN rail adapter Expansion of the mounting width by 9 mm XTPAXLM For connection of several DIN rail adapters 50 XTPAXCNE Discount Symbol CD7 CA08001E

9 -156 March 008 Pushbutton MMP Enclosures B-Frame Table Insulated Enclosures for Surface Mounting of XTPB Pushbutton Motor-Protective Circuit Breakers Global Usage IP40 1 XTPB MMP Only or with: XTPAXFA, XTPBXFAEM0, XTPAXSA..., XTPAXUVR..., XTPAXSR... XTPBXENCS x 80 x [6. x 3.15 x 4.59] 3R, 4X, 1, 13 With actuation membrane. XTPBXENCS x 80 x [6. x 3.15 x 4.59] 3R, 4X, 1, 13 3R, 4X, 1, 13 3R, 4X, 1, 13 3R, 4X, 1, 13 XTPB MMP Only or with: XTPAXFA, XTPAXUVR, XTPAXSR, XTPB MMP Only or with: XTPAXFA, XTPBXFAEM0, XTPAXUVR..., XTPAXSR, Integrated terminal for PE(N) connection, two M5 cable entry knockouts at top and at bottom. Lockable in OFF position. XTPBXENCSLO x 80 x 19.5 [6. x 3.15 x 5.] Lockable in OFF position in combination with XTPBXFAEM0 Early Make front mount auxiliary contact With Emergency-Stop (E-Stop) pushbutton actuator, Red-Yellow With Emergency-Stop (E-Stop) pushbutton actuator, Red-Yellow key release XTPBXENCSLE x 80 x 19.5 [6. x 3.15 x 5.] XTPBXENCSES x 80 x 177. [6. x 3.15 x 6.98] XTPBXENCSEK x 80 x 177. [6. x 3.15 x 6.98] Table Insulated Enclosures for Surface Mounting of XTPB Pushbutton North American Usage IP41 1 XTPB MMP Only or with: XTPAXFA, XTPBXFAEM0, XTPAXSA..., XTPAXUVR..., XTPAXSR, XTPBXENAS x 80 x [6. x 3.15 x 4.59] 3R, 4X, 1, 13 With actuating diaphragm XTPBXENAS x 80 x [6. x 3.15 x 4.59] 3R, 4X, 1, 13 3R, 4X, 1, 13 3R, 4X, 1, 13 3R, 4X, 1, 13 XTPB MMP Only or with: XTPAXFA, XTPAXUVR, XTPAXSR, XTPB MMP Only or with: XTPAXFA, XTPBXFAEM0, XTPAXUVR..., XTPAXSR, Built-in terminal for PE(N). North American enclosures come with conduit adapters for use with 1/" NPT. Lockable in OFF position XTPBXENASLO x 80 x 19.5 [6. x 3.15 x 5.] Lockable in OFF position in combination with XTPBXFAEM0 Early Make front mount auxiliary contact. With Emergency-Stop (E-Stop) pushbutton actuator, Red-Yellow With Emergency-Stop (E-Stop) pushbutton actuator, Red-Yellow key release XTPBXENASLE x 80 x 19.5 [6. x 3.15 x 5.] XTPBXENASES x 80 x 177. [6. x 3.15 x 6.98] XTPBXENASEK x 80 x 177. [6. x 3.15 x 6.98] Dimensions Page -168 Discount Symbol CD7 CA08001E

10 March Table -00. Insulated Enclosures for Flush Mounting of XTPB Pushbutton Global and North American Usage Front IP40 1 Front 3R, 4X, 1, 13 XTPB Only or with: XTPAXFA, XTPBXFAEM0, XTPAXSA, XTPAXUVR, XTPAXSR, XTPBXENCF40 19 x 90. x 115. [5.08 x 3.55 x 4.54] With actuation membrane XTPBXENCF55 19 x 90. x 115. [5.08 x 3.55 x 4.54] Front 3R, 4X, 1, 13 Front 3R, 4X, 1, 13 Front 3R, 4X, 1, 13 Front 3R, 4X, 1, 13 Integrated terminal for PE(N) connection. Rotary MMP Enclosures XTPB Only or with: XTPAXFA, XTPAXUVR, XTPAXSR, XTPB Only or with: XTPAXFA, XTPBXFAEM0, XTPAXUVR, XTPAXSR, Lockable in OFF position XTPBXENCFLO55 19 x 90. x 115. [5.08 x 3.55 x 4.54] Lockable in OFF position in combination with XTPBXFAEM0 Early Make front mount auxiliary contact With Emergency-Stop (E-Stop) pushbutton actuator With Emergency-Stop (E-Stop) pushbutton actuator, key release XTPBXENCFLE55 19 x 90. x 115. [5.08 x 3.55 x 4.54] XTPBXENCFES55 19 x 90. x [5.08 x 3.55 x 6.93] XTPBXENCFEK55 19 x 90. x [5.08 x 3.55 x 6.93] B-Frame D-Frame Table -01. Insulated Enclosures for Surface Mounting of B-Frame (0.1 3A) XTPR Rotary Motor-Protective Circuit Breakers Global Usage IP41 with vertical mounting B-Frame XTPR Only or with: XTPAXFA, XTPAXSA, XTPAXSATR, XTPAXUVR, XTPAXSR, Cover with aperture dimensioned to accommodate front of MMP. IP40, when mounted turned through 90 to left/right XTPAXENCS x 0 x 4 [6.30 x 3.94 x 4.09] With black/grey rotary handle XTPAXENCS65B 160 x 0 x 130 [6.30 x 3.94 x 5.1] IP40 B-Frame XTPR Only or with: XTPAXSA, XTPAXUVR, XTPAXSR, With red/yellow rotary handle for use as Emergency-Stop switches to IEC/ EN 6004 Cover with aperture dimensioned to accommodate front of MMP. XTPAXENCS65RY 160 x 0 x 130 [6.30 x 3.94 x 5.1] XTPAXENCS x 80 x 0 [6. x 3.15 x 3.94] IP55 IP55 B-Frame XTPR Only or with: XTPAXFA, XTPAXSA, XTPAXUVR, XTPAXSR, With black/gray rotary handle XTPAXENCS55B 158 x 80 x 15.5 [6. x 3.15 x 4.94] With red/yellow rotary handle for use as Emergency-Stop switches to IEC/ EN 6004 XTPAXENCS55RY 158 x 80 x 15.5 [6. x 3.15 x 4.94] M5 metric cable entry knock-out, top and bottom. Cable push-through membrane, top and bottom, in the back plate and as a control line entry. Includes N and PE terminals. Integrated terminal for PE(N) connection, two M5 cable entry knockouts at the top and bottom. Discount Symbol CD7 CA08001E

11 -158 March 008 Table -0. Insulated Enclosures for Surface Mounting of B-Frame (0.1 3A) XTPR Rotary North American Usage IP55 1, 1, 3R B-Frame XTPR Only or with: XTPAXSA and XTPAXFA, XTPAXUVR and XTPAXFA, XTPAXSR and XTPAXFA, Built-in N and PE terminal, lower part without knockouts. With black/gray rotary handle XTPAXENAS55B 160 x 0 x 130 [6.30 x 3.94 x 5.1] With red/yellow rotary handle for use as Emergency-Stop switch to VDE 0113 XTPAXENAS55RY 160 x 0 x 130 [6.30 x 3.94 x 5.1] Table -03. Insulated Enclosures for Surface Mounting of B-Frame XTPR (0.1 3A) Rotary Motor-Protective Circuit Breakers with XTPAXFAEM0 Early-Make Front Mount Auxiliary Contact Global Usage IP55 IP55 Table -04. Insulated Enclosures for Surface Mounting of B-Frame XTPR (0.1 3A) Rotary with XTPAXFAEM0 Early- Make Front Mount Auxiliary Contact North American Usage IP55 1, 1, 3R Built-in N and PE terminal, lower part without knockouts. Table -05. Insulated Enclosures for Flush Mounting of B-Frame (0.1 3A) XTPR Rotary Global Usage Front IP40 B-Frame XTPR and XTPAXFAEM0 only or with: XTPAXFA, XTPAXSA, XTPAXSATR, XTPAXUVR, XTPAXSR, B-Frame XTPR and XTPAXFAEM0 only or with: XTPAXFA, XTPAXUVR, XTPAXSR, B-Frame XTPR Only or with: XTPAXSA, XTPAXUVR, B-Frame XTPR Only or with: XTPAXSA, XTPAXUVR, XTPAXSR, With black/gray rotary handle XTPAXENCSEM65B 160 x 0 x 130 [6.30 x 3.94 x 5.1] With red/yellow rotary handle for use as Emergency-Stop switches to IEC/EN 6004 XTPAXENCSEM65RY 160 x 0 x 130 [6.30 x 3.94 x 5.1] With black/gray rotary handle XTPAXENCSEM55B 158 x 80 x 0 [6. x 3.15 x 3.94] With red/yellow rotary handle for use as Emergency-Stop switches to IEC/EN 6004 XTPAXENCSEM55RY 158 x 80 x 0 [6. x 3.15 x 3.94] With black/grey rotary handle XTPAXENASEM55B 160 x 0 x 130 [6.30 x 3.94 x 5.1] With red/yellow rotary handle for use as Emergency-Stop switch to VDE 0113 Cover with aperture dimensioned to accommodate front of MMP. XTPAXENASEM55RY 160 x 0 x 130 [6.30 x 3.94 x 5.1] XTPAXENCF40 19 x 85 x 96 [5.08 x 3.35 x 3.78] Front IP55 B-Frame XTPR Only or with: XTPAXSA, XTPAXUVR, XTPAXSR, XTPAXFA, Integrated terminal for PE(N) connection. With black/gray rotary handle XTPAXENCF55B 19 x 85 x 14 [5.08 x 3.35 x 4.88] With red/yellow rotary handle for use as Emergency-Stop switches to IEC/EN 6004 XTPAXENCF55RY 19 x 85 x 14 [5.08 x 3.35 x 4.88] Table -06. Insulated Enclosures for Surface Mounting of D-Frame ( 65A) Rotary Motor-Protective Circuit Breakers 1, 1, 3R 1, 1, 3R D-Frame XTPR Only or with: XTPAXFA, XTPAXFAEM0, XTPAXSA, XTPAXSATR, XTPAXUVR, XTPAXSR, With black/gray rotary handle XTPAXENCSD65B 40 x 160 x 197 [9.45 x 6.30 x 7.76] With red/yellow rotary handle for use as Emergency-Stop switches to IEC/EN 6004 XTPAXENCSD65RY 40 x 160 x 197 [9.45 x 6.30 x 7.76] Integrated terminal for PE(N) connection. Metric knockouts: Top bottom: M5/M3 In backplate: M5/M3 Control cable entry: M0 Discount Symbol CD7 CA08001E

12 March MMP Enclosure Accessories Table -07. XTPR Manual Motor Protector Enclosure Padlock Attachment XTPAXENCS65B, XTPAXENCS65RY, XTPAXENCSEM65B, XTPAXENCSEM65RY, XTPAXENCS55B, XTPAXENCS55RY, XTPAXENCSEM55B, XTPAXENCSEM55RY XTPAXENCSD65B, XTPAXENCSD65RY XTPAXENCF55B, XTPAXENCF55RY Lockable in the 0-position of the XTPR manual motor protector. Lockable in the OFF position of the B-Frame XTPR manual motor protector. Table -08. Neutral Terminal for use with XTPB and B-Frame XTPR Flush-Mount Enclosures XTPBXENCF40, XTPBXENCF55, XTPAXENCF40, XTPAXENCF55B, XTPAXENCF55RY Padlocking feature. Up to 3 padlocks with 3 6 mm hasp thickness. For use as main switch to IEC/EN XTPAXPL1 1 XTPAXPL 3 XTPAXPL3 For connection of a fifth conductor 0 XTPAXNT Metric Cable Glands to EN 506 Indicating Lights with Neon Bulb With locknut and internal strain relief IP68 up to 5 bar, hydrogen free Table -09. Metric Cable Glands 0.5 mm Metric Cable Gland 0 XTPAXMCG mm Wire 5.5 mm Metric Cable Gland 0 XTPAXMCG mm Wire 3.5 mm Metric Cable Gland XTPAXMCG mm Wire 3.5 mm Metric Cable Gland XTPAXMCG3G 18 5 mm wire Metric Diaphragm Grommet For use with XTPR and XTPB enclosures Lights do not carry individual IP or rating. All enclosure ratings remain valid when using indicating lights. Table -11. Indicating Lights Color Indicating Light White Green Red 1 30V 30 40V V 1 30V 30 40V V 1 30V 30 40V V XTPAXILWB XTPAXILWN XTPAXILWC XTPAXILGB XTPAXILGN XTPAXILGC XTPAXILRB XTPAXILRN XTPAXILRC With internal push-through diaphragm Table -. Metric Diaphragm Grommet 0.5 mm Diaphragm Grommet 0 XTPAXMDG mm Wire 5.5 mm Diaphragm Grommet 0 XTPAXMDG mm Wire 3.5 mm Diaphragm Grommet 0 XTPAXMDG3 1 4 mm Wire With integral push-through diaphragm. Discount Symbol CD7 CA08001E

13 -160 March 008 Technical Data and Specifications Table -1. XT Technical Data and Specifications XTPBP16B XTPB016B XTPRP16B XTPR03B XTPR016D XTPR063D XTPMP16B XTPM03B General Standards IEC/EN 60947, VDE 0660, UL 508, CSA C. No. 14 Climatic proofing Damp heat, constant, to IEC ; damp heat, cyclic, to IEC Ambient temperature, C Storage Open Enclosed Mounting position -5 / 80-5 / 55-5 / / 80-5 / 55-5 / / 70-5 / 55-5 / 40-5 / 80-5 / 55-5 / 40 XTPTP16B XTPT05B -5 / 80-5 / 55-5 / Direction of incoming supply As required As required As required As required As required protection Device Terminals against direct contact Shock resistance half-sinusoidal shock ms to IEC (g) IP0 IP00 IP0 IP00 IP0 IP00 IP0 IP00 Finger- and back-of-hand proof Altitude (m), maximum Terminal capacity Solid (mm) Flexible with ferrule to DIN 468, (mm) Solid or stranded (AWG) x (1 6) x (1 6) 18 x (1 6) x (1 6) 18 1 x (1 50) x (1 35) 1 x (1 35) x (1 35) 14 x (1 6) x (1 6) 18 Terminal screw tightening torque Main cable, Nm Main cable, lb-in Control circuit cable, Nm Control circuit cable, lb-in Main contacts Rated impulse withstand voltage (U imp ), V AC Overvoltage category / pollution degree III / 3 III / 3 III / 3 III / 3 III / 3 Rated operational voltage (U e ), V AC Rated uninterrupted current = rated operational current (I u = I e ) in amperes 5 or current setting of the overcurrent release 3 or current setting of the overcurrent release 63 or current setting of the overcurrent release 3 or current setting of the overcurrent release IP0 IP00 x (1 6) x (1 6) 18 Rated frequency, Hz Current heat loss (3-pole at operating temperature), W Lifespan, mechanical (ops) 50,000 0,000 30,000 0,000 0,000 Lifespan, electrical (AC-3 at 400 V) (ops) 50,000 0,000 30,000 0,000 0,000 Maximum operating frequency, operations/hr Short-circuit rating AC See Page DC (ka) (up to XTPR016B) 40 (XTPR00B XTPR03B) Motor switching capacity AC-3 (up to 690 V) in amperes DC-5 (up to 50 V) in amperes (3 contacts in series) (up to XTPM016B) 40 (XTPM00B XTPR03B) (3 contacts in series) or current setting of the overcurrent release 60 (up to XTPT016B) 40 (XTPT00B XTPT05B) CA08001E

14 -33 MMPs & Manual and Combination Motor Controllers Type A30 March 008 Accessories Table Accessories A30 U.S. $ Enclosure, Nonmetallic IP41 General Purpose IP55 Dust and Water Conversion Kit (Converts IP41 Enclosure to IP55) C799MP41 C799MP55 C30MSG1 Conduit Adapter To convert PG16 Metric Threads on C799MP41 and C799MP55 to 1/" N.P.T. Threads C30MSA1 Enclosure, Semimetallic UL Listed for 1, 4, 4X, 1 and 13 Applications C799MP11 Enclosure with Emergency Pushbutton and Indicating Light Flush Plate (Cavity Mount), Nonmetallic IP41 General Purpose IP55 Dust and Water Conversion Kit (Converts IP41 Flush Plate to IP55) C799FP41 C799FP55 C30MSG Emergency Pushbutton For Enclosures and Flush Plates E Button E Button Latch Pull to Release C30MSE1 C30MSE Padlock Attachment For Enclosures and Flush Plates C30MSD Enclosure with Padlock Attachment and Indicating Light Red Indicating Light 1/V 0/40V 380/415V 40/500V 500/600V Green Indicating Light 1/V 0/40V 380/415V 40/500V 500/600V Auxiliary Contacts, Side Mounted 1NO-1NC NO 1NO-1NC Early Closing NO Early Closing SPDT Logic Level (0 ma, 30V maximum) C30MSL1A C30MSL1B C30MSL1L C30MSL1C C30MSL1D C30MSLA C30MSLB C30MSLL C30MSLC C30MSLD C30MSC3 C30MSC4 C30MSC6 C30MSC7 C30MSC3L A30 MMP with Side Auxiliary Contact Discount Symbol CD-1 CA08001E