ER48D Range. 2 Cooktop Assembly 11 Oven Parts (Diag. 2) 3 Cooktop Parts 12 Exterior Components. 4 Burners and Tubes 13 Exterior Parts

Transcription

1 ER48D Range Page Description Page Description Cooktop Assembly Oven Parts (Diag. ) 3 Cooktop Parts Exterior Components 4 Burners and Tubes 3 Exterior Parts 5 Manifold Assembly 4 Door Assembly (Right) 6 Manifold Parts 5 Door Parts (Right) 7 Control Panel Assy 6 Door Assembly (Left) 8 Control Panel Parts 7 Door Parts (Left) 9 Oven Assy (Diag. ) 8 Base Assembly 0 Oven Assy (Diag. ) 9 Misc. Parts, Fasteners IMPORTANT: This model is not approved for field conversions from one gas type to another and from one altitude setting to another. Revised

2 ER48D Cooktop Assembly Page

3 ER48D Cooktop Parts Item Part # Description KNOB, BLACK, RF, RR, LF, LR KNOB, METALLIC, RF, RR, LF, LR KNOB, BLACK, CF, CR KNOB, METALLIC, CF, CR Fasteners Required (Quantity) Part # 008CH END CAP, CHROME ( PER UNIT) () CP END CAP, COPPER ( PER UNIT) () BC END CAP, BLACK CHROME ( PER UNIT) () BR END CAP, BRASS ( PER UNIT) () CH TRIM RING, CHROME (6 PER UNIT) (3) CP TRIM RING, COPPER (6 PER UNIT) (3) BC TRIM RING, BLACK CHROME (6 PER UNIT) (3) BR TRIM RING, BRASS (6 PER UNIT) (3) BURNER CAP, 8.5K STACK BURNER ( PER UNIT) BURNER RING, 8.5K STACK BURNER ( PER UNIT) BURNER BASE ASSEMBLY 8.5K STACK BURNER ( PER UNIT) () BURNER CAP, 6K STACK BURNER ( PER UNIT) BURNER RING, 6K STACK BURNER ( PER UNIT) BURNER BASE ASSEMBLY 6K STACK BURNER ( PER UNIT) () BURNER CAP, 8K CROWN BURNER ( PER UNIT) BURNER RING, 8K CROWN BURNER ( PER UNIT) BURNER HEAD, 8K CROWN BURNER ( PER UNIT) THREAD RING, KIT GRATE 4 (3 PER UNIT) SIDE TRIM, SPILL TRAY, CHROME ( PER UNIT) (3) FRONT/REAR TRIM, SPILL TRAY, CHROME ( PER UNIT) (5) BP SPILL TRAY, LEFT BP SPILL TRAY, CENTER BP SPILL TRAY, RIGHT 00836BP PORCELAIN TRIM, SPILL TRAY ( PER UNIT) KIT, GRATE SUPPORT PAD, SERV GASKET, DUAL BURNER, GRAPHITE See fasteners page for description Part number is a kit containing this part. Kit contains burner ring and burner cap. 3 Part number is a kit containing this part. Kit contains burner ring and burner cap. 4 Part number is a kit containing this part. Kit contains burner ring, burner cap and burner head. 5 Part number 700 is a kit containing this part. Kit contains set of 4 thread rings. 6 Part number 6696 is a kit containing this part. Kit contains set of 4 support pads. Page 3

4 ER48D Burners and Tubes Item NG Part # LP Part # NGH Part # LPH Part # Description ASSY, INJECTOR HOLDER, 8.5K ASSY, INJECTOR HOLDER, 6K ASSY, INJECTOR HOLDER, 8K GASKET, DUAL BURNER, GRAPHITE O-RING, 6K BURNER O-RING, 8.5K BURNER FLEX TUBING, 3/6 x FLEX TUBING, 5/6 x FLEX TUBING, 5/6 x FLEX TUBING, 3/6 x FLEX TUBING, 5/6 x FLEX TUBING, 3/6 x IGNITER KIT, 8.5K/6K IGNITER KIT, 8K BRACKET, ISOLATOR NYLON, PCB SUPPORT BOARD, LED ISOLATOR SHIELD, LED ISOLATOR Page 4

5 ER48D Manifold Assembly Page 5

6 ER48D Manifold Parts Item NG Part # LP Part # Description WIRING HARNESS COOKTOP WIRING HARNESS COOKTOP IGNITER WIRE / / LED Kit ASSY, INLET, MAIN MANIFOLD IGNITER MODULE INSULATION, SINGLE POINT IGNITER SCREW, VALVE MOUNTING WASHER, VALVE MOUNTING WASHER, VALVE MOUNTING ASSEMBLY, MANIFOLD, LH ASSEMBLY, MANIFOLD, RH VALVE, 8.5K, LR VALVE, 8K, LF/RF VALVE, 6K, CR VALVE, 6K, CF VALVE, 8.5K, RR REGULATOR 3/ SWITCH, SPARK (not shown) HOLDER, BLUE LIGHT (not shown) RETAINING RING (not shown) WIRING HARNESS, 5 VDC (not shown) Use with Rev. A-C for ER48D/NG and ER48D/LP models. Use with Rev. A-D for ER48D/NG/H and ER48D/LP/H models. Use with Rev. D and above for ER48D/NG and ER48D/LP models. Use with Rev. E and above for ER48D/NG/H and ER48D/LP/H models. 3 Part number is a kit containing 6 wires, cut to the correct lengths to accommodate all 6 burners. 4 May be ordered only with RTM approval. Serial number required. Cannot be ordered to convert range to a different fuel. 5 Use kit P/N 7066 for units before serial number F-C Use kit P/N 7067 for units after serial number F-C (includes isolator board). All versions include 6 LED assembles. Replace all 6 so that they match in brightness. Page 6

7 ER48D Control Panel Assembly Page 7

8 ER48D Control Panel Parts Item Part # Description 006 PRINTED CIRCUIT BOARD, POWER Fasteners Required (Quantity) Part # 0083 TRANSFORMER, LIGHTING () DOOR LATCH () CONNECTOR, MEAT PROBE SWITCH, HIGH LIMIT () COVER, POWER BOARD (4) BUSHING, WIRING HARNESS, CONTROLLER BOARD CONTROLLER BOARD (4) MEMBRANE KEYPAD (3) ASSEMBLY, FLIP UP CONTROLLER, SERVICE (4) WIRE, GROUND, CONTROL PANEL SCREW, SLOT HWH, #0 x 3/8-003 WIRING HARNESS, MAIN (not shown) WIRING HARNESS, LIGHTING (not shown) WIRING HARNESS, DOOR LATCH (not shown) See fasteners page for description Kit part number includes the entire control panel assembly with wiring harnesses (except the controller board). Page 8

9 ER48D Oven Parts (Diagram ) Item Part # Description Fasteners Required (Quantity) Part # 707 CONVECTION BAFFLE KIT (right oven) (4) SMOKE ELIMINATOR () CONVECTION ELEMENT (right oven) (3) TEMPERATURE SENSOR () CONVECTION MOTOR AND FAN (3) FILTER, CONVECTION COOLING FAN CONVECTION BAFFLE KIT (left oven) (4) CONVECTION ELEMENT (left oven) (3) See fasteners page for description Part number 707 is a kit containing these parts. Kit contains convection baffle and 4 screws. 3 Part number 60 is a kit the convection fan, motor and hardware. Kit contains convection fan motor, fan blade, washer and nut. 4 Part number 708 is a kit containing these parts. Kit contains convection baffle and 4 screws. Page 9

10 ER48D Oven Assembly (Diagram ) Page 0

11 ER48D Oven Parts (Diagram ) Item Part # Description Fasteners Required (Quantity) Part # 706,3 RACK SUPPORT (4) BP FRAME, BROIL, RIGHT OVEN (4) ELEMENT, BROIL, RIGHT OVEN (4) GLASS, BROIL ELEMENT, RIGHT OVEN BAKE ELEMENT KIT, RIGHT OVEN BAKE ELEMENT KIT, RIGHT OVEN GLASS, BAKE 8 797BP FRAME, BAKE (8) GASKET, BAKE GLASS LIGHT FIXTURE, HALOGEN (INCLUDES FIXTURE AND LENS) 0049 LIGHT BULB, HALOGEN, V, 0 W WIRING HARNESS, MALE TO FEMALE, RIGHT BROIL/BAKE ELEMENT WIRING HARNESS, MALE TO MALE, RIGHT BROIL/BAKE ELEMENT ELEMENT, BROIL, LEFT OVEN () BAKE ELEMENT, LEFT OVEN () MEAT PROBE See fasteners page for description PN 706 is a kit containing both rack supports. 3 On the right oven, use PN (left rack support) and PN (right rack support) on the following revisions: Revision H of models ER48D-C-SCH/LP, ER48D-C-SCH/NG, ER48DSCH/LP, ER48DSCH/NG Revision J of models ER48D-C-SCH/LP/H, ER48D-C-SCH/NG/H, ER48DSCH/LP/H, ER48DSCH/NG/H and serial numbers: F-G30003, F-G30004, F-G3004, F-G3006 (ER48DSCH/NG) All units manufactured before or after these revisions use kit PN PN is a kit containing these parts. Kit contains bake element and bake element tray. Page

12 ER48D Exterior Components 8 Page

13 ER48D Exterior Parts Item Part # Description Fasteners Required (Quantity) Part # ISLAND, TRIM (5) PN 83708, (8) PN BACKGUARD, 3-INCH (5) PN 83708, (8) PN BACKGUARD, 9-INCH (5) PN 83708, (8) PN BACKGUARD, 4-INCH (5) PN 83708, (4) PN PANEL, RR, LEFT PANEL, RR, RIGHT COVER, JUNCTION BOX () COVER, REGULATOR (4) ASSY, SIDE PANEL, RIGHT ASSY, SIDE PANEL, LEFT RUBBER BUMPER ( REQUIRED PER UNIT) E CONTROL PANEL, ETCHED 0 007B INTAKE GRILL (8) ASSY, KICK PANEL (3) BRACKET, ANTI-TIP LEVELER LEVELER, ANTI-TIP LEG *****PLASTIC INSERT, LEG 6683******* NUT, JAM, HEX, #0-3/ BRACKET, ANTI-TIP (4) BOX, RR PANEL TERMINAL BLOCK KIT, HINGE RECEPTACLE ( right. left) (4 per set) BP COVER, MID-CELL, FRONT () See fasteners page for description Replacement part number shown. Order PN AERB48D0 for complete kit. 3 Replacement part number shown. Order PN AERB48D3 for complete kit. 4 Replacement part number shown. Order PN AERB48D9 for complete kit. 5 Replacement part number shown. Order PN AERB48D4 for complete kit. 6 Screw kit must be ordered separately. Order screw kit PN Kits contains 4 screws. Page 3

14 ER48D Door Assembly (Right) Page 4

15 ER48D Door Parts (Right) Item Part # Description ASSY, DOOR HANDLE, CHROME TRIM, RIGHT DOOR Fasteners Required (Quantity) Part # ASSY, DOOR SKIN WITH LOGO () B HEAT SHIELD, OUTER, RIGHT DOOR (4) B HEAT SHIELD, LOWER, RIGHT DOOR (4) B HEAT SHIELD, INNER, RIGHT DOOR (4) WINDOW PACK, RIGHT DOOR GASKET, WINDOW PACK, RIGHT DOOR COVER, BRACKET, HINGE MOUNTING, ( PER DOOR) (3) HINGE KIT, RIGHT DOOR BP DOOR LINER, RIGHT DOOR 000 GASKET, RIGHT DOOR 7793 SPACER, DOOR LINER, RIGHT DOOR SCREW, 0-3 x.00 TORX, PAN HEAD 4 75CH LOGO, DACOR CP/CH/BC/BR END CAP, HANDLE, COPPER/CHROME/BLACK CHROME/BRASS - - HINGE RECEPTACLE (see External Components) See fasteners page for description Order as kit, part number Kit includes handle, end caps and mounting screws. 3 Order as kit, part number 705. Includes factory installed front glass. 4 Order as kit, part number 703. Kit includes both hinges. Page 5

16 ER48D Door Assembly (Left) Page 6

17 ER48D Door Parts (Left) Item Part # Description ASSY, DOOR HANDLE, CHROME TRIM, RIGHT DOOR Fasteners Required (Quantity) Part # ASSEMBLY, DOOR SKIN, LEFT DOOR () B HEAT SHIELD, OUTER, LEFT DOOR (4) B HEAT SHIELD, LOWER, LEFT DOOR (4) B HEAT SHIELD, INNER, LEFT DOOR (4) WINDOW PACK, LEFT DOOR GASKET, WINDOW PACK, LEFT DOOR COVER, BRACKET, HINGE MOUNTING, ( PER DOOR) (3) HINGE KIT, LEFT DOOR BP DOOR LINER, LEFT DOOR 0007 GASKET, LEFT DOOR 7793 SPACER, DOOR LINER, RIGHT DOOR SCREW, 0-3 x.00 TORX, PAN HEAD CP/CH/BC/BR END CAP, HANDLE, COPPER/CHROME/BLACK CHROME/BRASS - - HINGE RECEPTACLE (see External Components) See fasteners page for description. Order as kit, part number Kit includes handle, end caps and mounting screws. 3 Order as kit, part number 704. Kit includes both hinges. Page 7

18 ER48D Base Assembly Item Part # Description Fasteners Required (Quantity) Part # 0000 BASE, FRONT/REAR LEG BASE, SIDE SUPPORT NUT, JAM, HEX, #0-3/ BRACKET, ANTI-TIP LEVELER LEVELER, ANTI-TIP PLASTIC INSERT, LEG (not shown) See fasteners page for description. Page 8

19 ER48D Misc. Parts, Accessories, Fasteners Part # AWR4 AG44 AEGR3648 WOK RING GRIDDLE GRILL 807 STANDARD BROIL PAN Miscellaneous Parts and Accessories 806 GRILL FOR STANDARD BROIL PAN Description GLIDERACK OVEN RACK (for use with right oven only) 6783 STANDARD TYPE OVEN RACK, RIGHT OVEN 678 STANDARD TYPE OVEN RACK, LEFT OVEN AORPVR ABS0 ACS363 LARGE CAPACITY ROAST/BROIL PAN WITH V-SHAPED RACK PIZZA BAKING STONE COOKIE SHEETS (3 PER CARTON) Use PN on the following revisions: Revision H of models ER48D-C-SCH/LP, ER48D-C-SCH/NG, ER48DSCH/LP, ER48DSCH/NG Revision J of models ER48D-C-SCH/LP/H, ER48D-C-SCH/NG/H, ER48DSCH/LP/H, ER48DSCH/NG/H and serial numbers: F-G30003, F-G30004, F-G3004, F-G3006 (ER48DSCH/NG) All units manufactured before or after these revisions use PN Use PN 070 on the following revisions: Revision H of models ER48D-C-SCH/LP, ER48D-C-SCH/NG, ER48DSCH/LP, ER48DSCH/NG Revision J of models ER48D-C-SCH/LP/H, ER48D-C-SCH/NG/H, ER48DSCH/LP/H, ER48DSCH/NG/H and serial numbers: F-G30003, F-G30004, F-G3004, F-G3006 (ER48DSCH/NG) All units manufactured before or after these revisions use PN Fasteners Part # Description 0505 SCREW, 4-40 x / P FL SCREW COUNTER SUNK HEAD M4 x SCREW, SLOT #0 x 3/8 HWH NUT, KEPS, SCREW, PHILLIPS HEAD, #8 x 3/ SCREW,TORX, WAFER HEAD, #8 x /, CHOME SCREW,TORX, WAFER HEAD, #8 x /, BLACK Page 9