F3.00 Paddlewheel Flow Sensor INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description..

Size: px

Start display at page:

Download "F3.00 Paddlewheel Flow Sensor INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description.."

Cecily Washington
5 years ago
Views:

INSTRUCTION MANUAL EN 10-11 Table of Contents 1. Introuction 2 1.1. Safety Instructions.. 2 1.2. Unpacking. 2 2. Description.. 3 2.1. Design.... 3 2.2. Technical Features.. 3 2.3. Operating Principle.

1 INSTRUCTION MANUAL EN Table of Contents 1. Introuction Safety Instructions Unpacking Description Design Technical Features Operating Principle Connection to FlowX3 Instruments Output Devices K3 Frequency Output an MIN Alarm KIT K330 4 ma Output KIT Installation Specifications Technical Data Maximum Operating Pressure/Temperature Dimensions Installation Location Mounting Position Process Connection Wiring Installation Fittings Tables Orering Data 18 1

2 1. Introuction 1.1. Safety Instructions General Statements The sensor F3.00.X.XX has only been esigne to measure the flow of liquis. Do not install an service the sensor without following the Instruction Manual. This sensor is esigne to be connecte to other instruments which can be hazarous if use improperly. Rea an follow all associate instrument manuals before using with this sensor. Sensor installation an wiring connections shoul only be performe by qualifie staff. Do not moify prouct construction. Installation an Commissioning Statements Remove power to the sensor before wiring any connection. Depressurize an vent the system before installing or removing the sensor. Check an confirm the chemical compatibility of the materials in contact with the liqui. Do not excee maximum temperature/pressure ata. To clean the sensor, use only chemical compatible proucts Unpacking Please verify that the prouct is complete an without any amage. The following items must be inclue: Instruction Manual for F3.00 Flow Sensor Instruction Manual for K330 or K3 Output KIT (only for F3.30 or F3. version) 2

3 2. Description 2.1. Design The simple an reliable palewheel flow sensor type F3.00 is esigne for use with every kin of soli-free liquis. The sensor can measure flow from 0. m/s (0.5 ft/s) proucing a frequency output signal highly repeatable. A rugge construction an a proven technology guarantee exceptional performances with little or no maintenance require. A specially esigne family of fittings ensures an easy an quick installation into all pipe materials in sizes from to 600 (0.5 to 24 in.) Technical Features A. Sensor for compact installation (F3.01) with fiel-mount transmitter (sol separately) B. Sensor for remote installation in configuration C. Sensor for remote installation in IP configuration D. Palewheel system 1) Electrical cable: 8 m. (26.4 ft) stanar 2) 4-pole cable plug accoring to DIN 436-B/ISO ) PVC cap for installation into fittings 4) O-Ring seals available in or 5), or Stainless Steel sensor boy 6) ECTFE (Halar ) Open-cell rotor 7) Ceramic shaft 8) Ceramic bearings Halar is a registere traemark of Ausimont-Solvay Operating Principle The flow sensor consists of a transucer an a five-blae open cell palewheel using insertion technology. The palewheel is equippe with a permanent magnet integrate into each blae. As the magnet passes close to the transucer a pulse is generate. When liqui flows into the pipe, the palewheel is set in rotation proucing a square wave output signal. The frequency is proportional to the flow velocity. The sensor is installe into the pipe using a wie range of insertion type fittings supplie by the flow sensor manufacturer. 3

2.4. Connections to FlowX3 Instruments FlowX3 Instruments FlowX3 Sensors F9.00 F9.01 F9.02 F9.30 F9. F9. F9.51 PLC F3.00.H X X X X X X F3.00.C X F3.00.P X F3.01.H X X X X X X F3.01.C X F3..H* X X X X X F3.

It is equippe with an open collector frequency output an a mechanical SPDT contact. The MIN alarm set-point can be freely set by a potentiometer from 0. to 1 m/s ( 0.5 to 3.3 ft/s).

4 2.4. Connections to FlowX3 Instruments FlowX3 Instruments FlowX3 Sensors F9.00 F9.01 F9.02 F9.30 F9. F9. F9.51 PLC F3.00.H X X X X X X F3.00.C X F3.00.P X F3.01.H X X X X X X F3.01.C X F3..H* X X X X X F3.30.H* * with Output KIT mounte 2.5. Output Devices K3 Frequency Output & MIN alarm KIT This Kit consists of an aitional IP housing plugge on the sensor. It is equippe with an open collector frequency output an a mechanical SPDT contact. The MIN alarm set-point can be freely set by a potentiometer from 0. to 1 m/s ( 0.5 to 3.3 ft/s). When the flow velocity rops below the ajuste limit the relay output opens an the Local Status Inicator changes colour. It has been esigne to protect a pump from running ry or pumping against a close valve in the main pipeline K ma Output KIT This Kit consists of an aitional IP housing plugge on the sensor. It is a blin transmitter esigne to convert the signal from the sensor into a 4 ma signal for long istance transmission Installation The K3 an K330 Kits can be orere irectly mounte on top of the flow sensor or separately an then simply installe on the proper sensor. Please refer to the Instruction Manual of the Output KIT for proper installation an calibration. 4

5 3. Specifications 3.1. Technical Data General (for both F3.00.H, F3.00.C & F3.00.P) Pipe Size Range: to 600 (0.5 to 24 in.). Refer to Installation Fittings section for more etails Flow Rate Range: 0. to 8 m/s (0.5 to ft./s) Linearity: 0. % of full scale Repeatability: 0.5 % of full scale Minimum Reynols Number Require: 40 Enclosure: or IP Wette Materials: Sensor Boy: or or 316L SS O-rings: or Rotor: ECTFE (Halar ) Shaft: Ceramic (Al 2 O 3 ) Bearings: Ceramic (Al 2 O 3 ) Stanars & Approvals Manufacture uner ISO 02 CE Specific for F3.00.H Supply voltage: 5 to 24 VDC regulate Supply current: < VDC Output signal: square wave Output frequency: 45 Hz per m/s nominal (13.7 Hz per ft/s nominal) Output type: transistor NPN open collector Output current: 10 ma max. Cable length: 8 m (26.4 ft) stanar, 300 m (9 ft) maximum Specific for F3.00.C Supply voltage: 3 to 5 VDC regulate or 3.6 Volt Lithium battery Supply current: < 10 A Output signal: square wave Output frequency: 45 Hz per m/s nominal (13.7 Hz per ft/s nominal) Min. input impeance: 100 K Cable length: 8 m (26.4 ft) stanar, 16 m (52.8 ft) maximum Specific for F3.00.P Supply voltage: 12 to 24 VDC regulate Supply current: < VCC Output signal: square wave Output frequency: 45 Hz per m/s nominal (13.7 Hz per ft/s nominal) Output type : Push Pull (igital input NPN or PNP) Output current : I Out Max < ma Cable length: 8 m (26.4 ft) stanar, 300 m (9 ft) maximum. 5

6 3.2. Maximum Operating Pressure / Temperature ( years lifetime) F3.00.H Sensor boy: 10 bar (145 C (77 F) 1,5 bar (22 C (176 F) boy: 10 bar (145 C (77 F) 2,5 bar ( C (212 F) SS boy: bar (3 1 C (248 F) F3.00.C Sensor boy: 10 bar (145 C (77 F) 1,5 bar (22 C (176 F) boy: 10 bar (145 C (77 F) 2,5 bar ( C (212 F) SS boy: bar (3 100 C (212 F) 3.3. Dimensions F3.00 F3.00 IP F3.01 F3.01 Remote Sensor Remote Sensor Compact Sensor + transmitter (sol separately) = 68.3 mm (2.69 ) = 98.5 mm (3.88 ). 6

7 4. Installation 4.1. Location Different pipe configurations an obstacles in the flow line such as valves, elbows, pipe bens an strainers create variations on the flow profile. Whenever possible follow the EN ISO installation recommenations to locate the sensor. Always maximize istance between flow sensor an pump Mounting Position Make sure the pipeline is always full. Horizontal pipe runs: Fig. 1: installation with no seiments present Fig. 2: installation with no air bubbles present Fig. 3: installation if seiments or air bubbles may be present Vertical pipe runs: Install sensor in any orientation. Upwar flow is preferre to ensure full pipe. 7

Do not use any petroleum base lubricant that may amage the

Lower the sensor into the fitting making sure the alignment tab

Do not use any tool otherwise cap an/or fitting threas may be

4. Wiring Always ensure the power supply is switche off before

8 4.3. Process Connection 1. Lubricate the sensor O-rings with a silicone lubricant. Do not use any petroleum base lubricant that may amage the O-rings. 2. Lower the sensor into the fitting making sure the alignment tab is seate in the fitting notch. 3. Han tighten the sensor cap. Do not use any tool otherwise cap an/or fitting threas may be amage Wiring Always ensure the power supply is switche off before working on the sensor. Always use a high quality (regulate) DC voltage supply. F3.00.H Sensor Connection to FlowX3 Instruments F3.00.H Sensor Connection to Other Bran Instruments 2.7Kohm Pull-up resistor may be require. 8

9 F3.00.H IP Sensor Connection to FlowX3 Instruments F3.00.H IP Sensor Connection to Other Bran Instruments 2.7Kohm Pull-up resistor may be require F3.00.C Sensor Connection to FlowX3 Instruments F3.00.C Sensor Connection to Other Brans Instruments F3.00.C IP Sensor Connection to FlowX3 Instruments F3.00.C IP Sensor Connection to Other Brans Instruments 9

10 F3.00.P Sensor Connection to PLC with NPN Input F3.00.P Sensor Connection to PLC with PNP Input F3.00.P IP Sensor Connection to PLC with NPN Input F3.00.P IP Sensor Connection to PLC with PNP Input 10

5. Installation Fittings Type Description Plastic Tees Size: D to D (0.

5 ) Materials: PVC,, PP, Clamp Sales Size: D to D2 (2 to 8 ) Insert

PVC Wafer Fittings Size: D2 an D3 (10 an 12 ) Insert Material: GR-PP

Wel-on Aapters Size: D to D3 Materials: PVC,, PP, PE 316L SS Tees Size:

11 5. Installation Fittings Type Description Plastic Tees Size: D to D (0.5 to 1.5 ) Materials: PVC,, PP, Clamp Sales Size: D to D2 (2 to 8 ) Insert Materials:, PP Clamp Sales Size: D0 to D3 (10 to 12 ) Insert Material: PVC Wafer Fittings Size: D2 an D3 (10 an 12 ) Insert Material: GR-PP Wafer Fittings Size: D2 an D3 (10 an 12 ) Insert Material: Plastic Wel-on Aapters Size: D to D3 Materials: PVC,, PP, PE 316L SS Tees Size: D to D BSP Female Threae Size: to 4 Insert Material: Special orer for other sizes Size: D to D600 (1.5 to 24 ) Metal Strap-on Sales 316L SS Wel-on Aapters 11

12 6. Tables is the number of pulses a sensor prouces for one liter of flui measure. Here all s for water at ambient temperature are liste. values can epen upon the installation conitions. Please contact your ealer for values not inclue in the tables. Installation on PVC pipes ISO Metric PVC Tee Fittings for ISO SDR 21 pipes (female ens for solvent weling) 235,45 TFIVB 142,46 TFIVB 91,53 TFIVB 51,57 TFIVB 42,89 TFIVB 235,45 TFIVD 142,46 TFIVD 91,53 TFIVD 51,57 TFIVD 42,89 TFIVD PVC Glue-on Fittings WAIV0 WAIV0 WAIV0 WAIV WAIV1 110 WAIV1 1 WAIV160 0 WAIV0 1 WAIV2 0 WAIV0 2 WAIV2 0 WAIV BSP Female Threae PVC Tee Fittings for for BS PN12 pipes (parallel threae female ens) R 235,45 TFFVB 1/2" 142,46 TFFVB 3/4" 91,53 TFFVB 1" 51,57 TFFVB 1 1/4" 42,89 TFFVB 1 1/2" 235,45 TFFVD 1/2" 142,46 TFFVD 3/4" 91,53 TFFVD 1" 51,57 TFFVD 1 1/4" 42,89 TFFVD 1 1/2" ISO Metric Clamp Sales for ISO SDR 21 pipes (PN10 up to mm, PN12,5 from 110mm) 21,69 SCIC0BVC 14,98 SCIC0BVC 9,88 SCIC0BVC 6,06 SCIC110BVC ,59 SCIC1BVC ,59 SCIC1BVC 1 1 2,69 SCIC160BVC , SCIC0BVC 1 0 1,28 SCIC2BVC ,69 SCIC0DVC 14,98 SCIC0DVC 9,88 SCIC0DVC 6,06 SCIC110DVC ,59 SCIC1DVC ,59 SCIC1DVC 1 1 2,69 SCIC160DVC , SCIC0DVC 1 0 1,28 SCIC2DVC 0 2 1,01 SMIC0IVC 2 0 0,79 SMIC2IVC 0 2 0,61 SMIC3IVC 2 3 BS Solvent Weling PVC Tee Fittings for BS PN12 pipes (female ens for solvent weling) 235,45 TFLVB 1/2" 142,46 TFLVB 3/4" 91,53 TFLVB 1" 51,57 TFLVB 1 1/4" 42,89 TFLVB 1 1/2" 235,45 TFLVD 1/2" 142,46 TFLVD 3/4" 91,53 TFLVD 1" 51,57 TFLVD 1 1/4" 42,89 TFLVD 1 1/2" 12

13 NPT Female Threae PVC Tee Fittings for ASTM SCH. pipes (NPT threae female ens) SIZE R 235,45 TFNVB 0." 1/2" 142,46 TFNVB 0." 3/4" 91,53 TFNVB 1.00" 1" 51,57 TFNVB 1." 1 1/4" 42,89 TFNVB 1." 1 1/2" 235,45 TFNVD 0." 1/2" 142,46 TFNVD 0." 3/4" 91,53 TFNVD 1.00" 1" 51,57 TFNVD 1." 1 1/4" 42,89 TFNVD 1." 1 1/2" ASTM SCH. PVC Tee Fittings for ASTM SCH. pipes (female ens for solvent weling) SIZE TFAVB 0." 0,85" TFAVB 0." 1,06" TFAVB 1.00" 1,33" TFAVB 1." 1,67" TFAVB 1." 1,91" TFAVD 0." 0,85" TFAVD 0." 1,06" TFAVD 1.00" 1,33" TFAVD 1." 1,67" TFAVD 1." 1,91" BS Clamp Sales for BS PN12 pipes 24,10 SCLC2.0BVM 2" 10,29 SCLC3.0BVM 3" 5,72 SCLC4.0BVM 100 4" 2,48 SCLC6.0BVM 0 6" 1,34 SCLC8.0BVM 0 8" 24,10 SCLC2.0DVM 2" 10,29 SCLC3.0DVM 3" 5,72 SCLC4.0DVM 100 4" 2,48 SCLC6.0DVM 0 6" 1,34 SCLC8.0DVM 0 8" ASTM SCH. Clamp Sales for ASTM SCH. pipes SIZE 29,74 SCAC2.0BVM 2.00" 2,3", SCAC2.5BVM 2." 2,8" 12,36 SCAC3.0BVM 3.00" 3,0" 6,47 SCAC4.0BVM 4.00" 4,0" 4,00 SCAC5.0BVM 5.00" 5,5" 2,68 SCAC6.0BVM 6.00" 6,6" 1,46 SCAC8.0BVM 8.00" 8,6" 29,74 SCAC2.0DVM 2.00" 2,3", SCAC2.5DVM 2." 2,8" 12,36 SCAC3.0DVM 3.00" 3,0" 6,47 SCAC4.0DVM 4.00" 4,0" 4,00 SCAC5.0DVM 5.00" 5,5" 2,68 SCAC6.0DVM 6.00" 6,6" 1,46 SCAC8.0DVM 8.00" 8,6" ,45 142,46 91,53 51,57 42,89 235,45 142,46 91,53 51,57 42,89

14 Installation on C-PVC pipes ISO Metric Tee Fitings for ISO SDR 21 pipes (female ens for solvent weling) 235,45 TFICB 142,46 TFICB 91,53 TFICB 51,57 TFICB 42,89 TFICB 235,45 TFICD 142,46 TFICD 91,53 TFICD 51,57 TFICD 42,89 TFICD Glue-on Fittings WAIC0 WAIC0 WAIC0 WAIC WAIC1 110 WAIC1 1 WAIC160 0 WAIC0 1 WAIC2 0 WAIC0 2 WAIC2 0 WAIC ISO Clamp Sales for ISO SDR 21 pipes 21,69 SCIC0BVC 14,98 SCIC0BVC 9,88 SCIC0BVC 6,06 SCIC110BVC ,59 SCIC1BVC ,59 SCIC1BVC 1 1 2,69 SCIC160BVC , SCIC0BVC 1 0 1,28 SCIC2BVC ,69 SCIC0DVC 14,98 SCIC0DVC 9,88 SCIC0DVC 6,06 SCIC110DVC ,59 SCIC1DVC ,59 SCIC1DVC 1 1 2,69 SCIC160DVC , SCIC0DVC 1 0 1,28 SCIC2DVC 0 2 1,01 SMIC0IVC 2 0 0,79 SMIC2IVC 0 2 0,61 SMIC3IVC 2 3 Installation on PP pipes ISO Metric PP Tee Fittings for ISO SDR 11 pipes (female ens for socket weling) 212,17 TFIMB 135, TFIMB 89,36 TFIMB 48,94 TFIMB 42,10 TFIMB 212,17 TFIMD 135, TFIMD 89,36 TFIMD 48,94 TFIMD 42,10 TFIMD BSP Female Threae PP Tee Fittings for BS pipes (parallel threae female ens) R 212,17 TFFMB 1/2" 135, TFFMB 3/4" 89,36 TFFMB 1" 48,94 TFFMB 1 1/4" 42,10 TFFMB 1 1/2" 212,17 TFFMD 1/2" 135, TFFMD 3/4" 89,36 TFFMD 1" 48,94 TFFMD 1 1/4" 42,10 TFFMD 1 1/2" 14

15 ISO Clamp Sales for ISO SDR 21 pipes 27, SCIC0BME 18,56 SCIC0BME 12,44 SCIC0BME 7,59 SCIC110BME ,77 SCIC1BME ,49 SCIC1BME 1 1 3,38 SCIC160BME ,07 SCIC0BME 1 0 1,60 SCIC2BME , SCIC0DME 18,56 SCIC0DME 12,44 SCIC0DME 7,59 SCIC110DME ,77 SCIC1DME ,49 SCIC1DME 1 1 3,38 SCIC160DME ,07 SCIC0DME 1 0 1,60 SCIC2DME 0 2 1,27 SMIC0IME 2 0 0,99 SMIC2IME 0 2 0,77 SMIC3IME 2 3 PP Glue-on Fittings WAIM0 WAIM0 WAIM0 WAIM WAIM1 110 WAIM1 1 WAIM160 0 WAIM0 1 WAIM2 0 WAIM0 2 WAIM2 0 WAIM NPT Female Threae PP Tee Fittings for ASTM SCH. pipes (NPT threae female ens) R 212,17 TFNMB 0." 1/2" 135, TFNMB 0." 3/4" 89,36 TFNMB 1.00" 1" 48,94 TFNMB 1." 1 1/4" 42,10 TFNMB 1." 1 1/2" 212,17 TFNMD 0." 1/2" 135, TFNMD 0." 3/4" 89,36 TFNMD 1.00" 1" 48,94 TFNMD 1." 1 1/4" 42,10 TFNMD 1." 1 1/2" ASTM SCH. Clamp Sales for ASTM SCH. pipes SIZE 29,83 SCAC2.0BME 2.00" 2,3",37 SCAC2.5BME 2." 2,8" 12,36 SCAC3.0BME 3.00" 3,0" 6,47 SCAC4.0BME 4.00" 4,0" 3,92 SCAC5.0BME 5.00" 5,5" 1,53 SCAC6.0BME 6.00" 6,6" 1,44 SCAC8.0BME 8.00" 8,6" 29,83 SCAC2.0DME 2.00" 2,3",37 SCAC2.5DME 2." 2,8" 12,36 SCAC3.0DME 3.00" 3,0" 6,47 SCAC4.0DME 4.00" 4,0" 3,92 SCAC5.0DME 5.00" 5,5" 1,53 SCAC6.0DME 6.00" 6,6" 1,44 SCAC8.0DME 8.00" 8,6"

16 Installation on pipes ISO Metric Tee Fittings for ISO SDR 33 pipes (female ens for socket weling) 2,06 TFIFB 139,38 TFIFB 94,66 TFIFB 51,37 TFIFB 43,07 TFIFB 2,06 TFIFD 139,38 TFIFD 94,66 TFIFD 51,37 TFIFD 43,07 TFIFD ISO Clamp Sales for ISO SDR 33 pipes,58 SCIC0BF 14,09 SCIC0BF 9,29 SCIC0BF 5,69 SCIC110BF ,31 SCIC1BF ,36 SCIC1BF 1 1 2,52 SCIC160BF ,55 SCIC0BF 1 0 1, SCIC2BF 0 2,58 SCIC0DF 14,09 SCIC0DF 9,29 SCIC0DF 5,69 SCIC110DF ,31 SCIC1DF ,36 SCIC1DF 1 1 2,52 SCIC160DF ,55 SCIC0DF 1 0 1, SCIC2DF 0 2 Installation on PE pipes ISO Metric PVC Tee Fittings for PE SDR 11 pipes (PE en connectors for electrofusion or butt weling) 193,70 TFIVBE 134,07 TFIVBE 85,29 TFIVBE 48,68 TFIVBE 41,68 TFIVBE 193,70 TFIVDE 134,07 TFIVDE 85,29 TFIVDE 48,68 TFIVDE 41,68 TFIVDE PE Glue-on Fittings WAIE0 WAIE0 WAIE0 WAIE WAIE1 110 WAIE1 1 WAIE160 0 WAIE0 1 WAIE2 0 WAIE0 2 WAIE2 0 WAIE ISO Clamp Sales for PE SDR 11 pipes 27,39 SCIC0BME 18, SCIC0BME 12,41 SCIC0BME 7,57 SCIC110BME ,76 SCIC1BME ,49 SCIC1BME 1 1 3,37 SCIC160BME ,02 SCIC0BME 1 0 1,60 SCIC2BME ,39 SCIC0DME 18, SCIC0DME 12,41 SCIC0DME 7,57 SCIC110DME ,76 SCIC1DME ,49 SCIC1DME 1 1 3,37 SCIC160DME ,02 SCIC0DME 1 0 1,60 SCIC2DME 0 2 1,27 SMIC0IVC 2 0 0,99 SMIC2IVC 0 2 0,77 SMIC3IVC

17 Special Installation on 0 an 300 pipes PVC Wafer Fittings WVIC2B 0 WVIC3B 300 WVIC2D 0 WVIC3D PP Wafer Fittings WFIC2B WFIC3B WFIC2D WFIC3D Metal Fittings 316L SS Threae Tees (BSP Female Threas) R TFFX 3/4" TFFX 1" TFFX 1 1/4" 7,06 92,84 51,52 Metal Strap-on Sales mounte on Cast Iron pipes 10,22 SZIC0I 6,01 SZIC100I 100 3,64 SZIC1I 1 2,46 SZIC0I 0 1,28 SZIC0I 0 0,79 SZIC0I 0 0,53 SZIC300I 300 0,4 SZIC3I 3 0,31 SZIC0I 0 0,24 SZIC4I 4 Metal Strap-on Sales mounte on Other Metal pipes 9,61 SZIC0I 5,22 SZIC100I 100 3,31 SZIC1I 1 2,22 SZIC0I 0 1,23 SZIC0I 0 0, SZIC0I 0 0,52 SZIC300I 300 0,43 SZIC3I 3 0, SZIC0I SZIC4I 4 316L SS Wel-on Aapters mounte on Cast Iron pipes , ,22 6, ,64 1 2, , WAIX 2 0,79 WAIX 0 0,53 WAIX 300 0, WAIX 3 0,31 WAIX 0 0,24 WAIX 4 0, WAIX 0 0,14 WAIX L SS Wel-on Aapters mounte on Other Metal pipes 36,17 23, ,93 9,61 5, ,31 1 2, , WAIX 2 0, WAIX 0 0,52 WAIX 300 0,43 WAIX 3 0, WAIX WAIX 4 0, WAIX WAIX

18 7. Orering Data FlowX3 F3.00.H.XX (Remote version) Version F3.00.H.01 F3.00.H.02 F3.00.H.03 F3.00.H.04 F3.00.H.05 F3.00.H.06 F3.00.H.07 F3.00.H.08 F3.00.H.09 F3.00.H.10 F3.00.H.11 F3.00.H.12 F3.00.H. F3.00.H.26 F3.00.H.27 F3.00.H.28 F3.00.H.13 F3.00.H.14 F3.00.H. F3.00.H.16 F3.00.H.17 F3.00.H.18 F3.00.H.19 F3.00.H. F3.00.H.21 F3.00.H.22 F3.00.H.23 F3.00.H.24 F3.00.H.29 F3.00.H.30 F3.00.H.31 F3.00.H. Power supply Length 18 Boy O-rings Enclosure IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP

19 FlowX3 F3.00.C.XX (Remote version) Version F3.00.C.01 F3.00.C.02 F3.00.C.03 F3.00.C.04 F3.00.C.05 F3.00.C.06 F3.00.C.07 F3.00.C.08 F3.00.C.09 F3.00.C.10 F3.00.C.11 F3.00.C.12 F3.00.C. F3.00.C.26 F3.00.C.27 F3.00.C.28 F3.00.C.13 F3.00.C.14 F3.00.C. F3.00.C.16 F3.00.C.17 F3.00.C.18 F3.00.C.19 F3.00.C. F3.00.C.21 F3.00.C.22 F3.00.C.23 F3.00.C.24 F3.00.C.29 F3.00.C.30 F3.00.C.31 F3.00.C. Power supply Length 19 Boy O-rings Enclosure IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP

20 FlowX3 F3.00.P.XX (Remote version) Version F3.00.P.01 F3.00.P.02 F3.00.P.03 F3.00.P.04 F3.00.P.05 F3.00.P.06 F3.00.P.07 F3.00.P.08 F3.00.P.09 F3.00.P.10 F3.00.P.11 F3.00.P.12 F3.00.P. F3.00.P.26 F3.00.P.27 F3.00.P.28 F3.00.P.13 F3.00.P.14 F3.00.P. F3.00.P.16 F3.00.P.17 F3.00.P.18 F3.00.P.19 F3.00.P. F3.00.P.21 F3.00.P.22 F3.00.P.23 F3.00.P.24 F3.00.P.29 F3.00.P.30 F3.00.P.31 F3.00.P. Power supply Length Boy O-rings Enclosure IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP

21 FlowX3 F3.01.X.XX (Compact version) Version Power supply F3.01.H.01 F3.01.H.02 F3.01.H.03 F3.01.H.04 F3.01.H.05 F3.01.H.06 F3.01.H.07 F3.01.H.08 F3.01.H.09 F3.01.H.10 F3.01.H.11 F3.01.H.12 F3.01.H. F3.01.H.26 F3.01.H.27 F3.01.H.28 F3.01.C.01 F3.01.C.02 F3.01.C.03 F3.01.C.04 F3.01.C.05 F3.01.C.06 F3.01.C.07 F3.01.C.08 F3.01.C.09 F3.01.C.10 F3.01.C.11 F3.01.C.12 F3.01.C. F3.01.C.26 F3.01.C.27 F3.01.C.28 Length Boy O-rings Enclosure 21

22 FlowX3 F3..H.XX (with O.C. output & MIN alarm) Version Power supply F3..H.01 F3..H.02 F3..H.03 F3..H.04 F3..H.05 F3..H.06 F3..H.07 F3..H.08 F3..H.09 F3..H.10 F3..H.11 F3..H.12 F3..H.13 F3..H.14 F3..H. F3..H.16 Length Boy O-rings Enclosure IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP Boy O-rings Enclosure IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP IP FlowX3 F3.30.H.XX (with 4 ma output) Version Power supply Length F3.30.H.01 F3.30.H.02 F3.30.H.03 F3.30.H.04 F3.30.H.05 F3.30.H.06 F3.30.H.07 F3.30.H.08 F3.30.H.09 F3.30.H.10 F3.30.H.11 F3.30.H.12 F3.30.H.13 F3.30.H.14 F3.30.H. F3.30.H.16 22

Spare Parts Item A-1 A-2 A-2 A-3 A-3 Name Description F3.SP1 4-pole Cable Plug Cable Plug accoring to DIN 436 F3.SP2.1 Sensor Cap Black Sensor Cap, for version F3.SP2.2 Sensor Cap Re Sensor Cap, for version F3.

23 Spare Parts Item A-1 A-2 A-2 A-3 A-3 Name Description F3.SP1 4-pole Cable Plug Cable Plug accoring to DIN 436 F3.SP2.1 Sensor Cap Black Sensor Cap, for version F3.SP2.2 Sensor Cap Re Sensor Cap, for version F3.SP3.1 O-Rings Sensor boy O-rings F3.SP3.2 O-Rings Sensor boy O-rings F3.SP4 Rotor KIT ECTFE (Halar) rotor with Ceramic Shaft an Bearings F3.SP5.1 F3.SP5.2 F3.SP5.3 Sensor Plug Sensor Plug Sensor Plug Sensor Plug Sensor Plug Stainless Steel Sensor Plug F3.SP6 Electrical cable Cable (per meter), 3 con., 22AWG A-4 23

24 F.I.P. Formatura Iniezione Polimeri S.p.A. Loc. Pian i Parata, 160 Casella (GE) Italy Tel Fax

F3.63M Electromagnetic Insertion Flow Sensor INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description.

F3.63M Electromagnetic Insertion Flow Sensor INSTRUCTI MANUAL EN 10-11 Table of Contents 1. Introuction 1.1. Safety Instructions. 1.. Unpacking. Description. 3.1. Design... 3.. Technical Features 3.3.