Workshop Tools Safety at Work

Transcription

1 . 9 LED Lights Mechanic s Creepers Fender Cover Funnels Hearing Protectors Safety Glasses Scrapers rushes Knives and many more H 3 x 5 x T 2 mm 2 Components and Spare Parts see pages 279 to 25

2 9 lbf.in lbf.ft. 7 6 F N.m. 6 C T Flexible Inspection Light LED Light For the illumination of areas with restricted access e.g. at the dashboard High intensity light with flexible shaft Plastic K Spare bulb 97- LED Work Light Adjustable hook 5 LE D chip-onboard LED = \ approx. 3 h ] 3 x LR (Lady) z approx. 5 g Perfectly suitable for workshops Improved glass lens to focus the light into a tight beam mm diameter, approx. mm long h IP h 36 = Lumen = battery charging 23 V 5 6 Hz = 3.5 W. m IK 7 Newest CO (chip-on-board) technology \3h H 33 x W 3 x D 27 mm ]. V, 25 mah (NiMH rechargeable battery) D 2.5 h Dimensions: light: H 295 x W 57 x D 5 mm battery charger: H 7 x W 3 x D 27 mm Replaceable transparent front cover chip-on-board LED, same brightness as 5 standard LED Luminous flux: 36 Lumen Power: 3.5 W \ illuminated = poor battery capacity Soft-touch switch \ flashing = battery charging \ illuminated = battery charged 23 V, 5 6 Hz,. m cable and Euro-plug Weight light: 7 g Weight battery charger: 22 g H 33 x W 3 x D 27 mm Protection rating of lamp: IP 65 Sturdy: IK7 Reliable work light with excellent illumination power Cold ligth no risk of burns Cordless charging Protective cover made of shock and oil-resistant rubber Protection rating of battery charger: IP 2 Microprocessor controlled battery charging Lamp may remain in battery charger attery with electronic protection control Adjustable hook \ h ] 3 x AAA (Micro) LR 3 z approx. 2 g Perfect for leisure time and sports Convenient and comfortable head lamp 5 flexible head Adjustable head straps attery pack at the rear of the straps for equal distribution of weight \ h eam reaches up to 5 m ] 3 x LR (Lady) z approx. g Perfect for working, sports, rescue and security services 26 mm diameter and just 39 mm long Lanyard and belt loop included Components and Spare Parts see pages 279 to 25 IP 2 3

3 . 9 LED Light Mechanic s Creeper Advanced focus system circular spotlight or sharply focused beam Dynamic power switch with three brightness settings Luminous flux: 2 Lumen \ 3 h ] x AAA (Micro) LR 3 z approx. 92 g 33 mm long, 37 mm diameter Kneeling Mat H 5 x W 3 x D mm For convenient working underneath a vehicle 6 castors (7 mm ) Especially deep for a maximum freedom of movement under the vehicle Rigid one-piece construction made of high strength plastic, black Ergonomically shaped: cut out arm areas for optimal elbow-room Very comfortable: soft head rest, HAZET-blue Practical storage compartments for tools and small parts on the right and the left High capacity up to 3 kg Smooth-running swivel castors with rubber running surface, oil resistant and low-noise Practical carrying handle in the foot area Dimensions: H 5 x W 3 x D mm Creeper H 3 x W 5 x D 2 mm In shape of the HAZET logo Now even more comfort due to new foam quality Easy-to-clean surface Carrying suspension handle Made of non-absorbing foam with closed cell structure Mechanic s Mat H 3 x W 975 x D 35 mm In shape of the HAZET logo Now even more comfort due to new foam quality Easy-to-clean surface ig mat for motor mechanics Made of non-absorbing foam with closed cell structure With carrying handle For convenient working on and underneath a vehicle High capacity up to 5 kg 6 castors (63 mm ) Combines creeper and seat Quick and easy conversion from creeper to seat and vice versa Cushioned lying area, lead part coloured HAZET-blue Sturdy steel tube frame Dimensions: L 9 x W 5 x H 3 mm (lying position) Seat height: 2 mm, seat base: 3 x 3 mm Components and Spare Parts see pages 279 to 25

4 . 9 Pneumatic Chair Fender Cover For convenient working on a vehicle 5 castors (approx. 6 mm ) Movable chair with pneumatic seat height adjustment Cushioned seat base with a of 32 mm, HAZET-blue Loading capacity up to 5 kg Weight: 6 kg Adjustable in height from 3 to 5 mm With two integrated tool compartments rotating through 36 Tilt-resistant Universal Fender Cover Made of especially coated anti-slip material Waterproof, oil and grease repellent Cover adheres vertically to almost all car body surfaces (aluminium, steel, GRP) Regarding fire safety, cover corresponds to ritish and US standards Fed 32 7 Washable at C Cover for the protection of the car body surface from scratches and damages nylon front side surface Dimensions: 9 x 5 mm Car Cover With magnetic fastening (6 magnets) Optimal protection for your customers vehicles Protection from scratches, dents, oil and dirt Saving of costs, time and nerves Increased work quality reduction of refinishing works Fixation to the fender by magnetic fastening Suitable for nearly all vehicle types High-quality materials and manufacturing providing a long service life Dimensions: x 6 mm Also suitable for car repair with the engine running Waterproof, oil and grease repellent Regarding fire safety, cover corresponds to ritish and US standards Fed 32 Loop fastening For the protection of the front panels from scratches and damages Cut-outs for headlights and radiator Components and Spare Parts see pages 279 to 25 5

5 . 9 Steering Wheel and Seat Cover Set Magnetic Cup 5 mm d Holds small parts such as screws etc. Plastic Magnetic foot allows fixation to tool trolleys, workshop panels, car lifts etc Suitable for nearly all common car seats and steering wheels One size only Re-usable Durable Waterproof, oil and grease repellent Regarding fire safety, covers correspond to ritish and US standards Fed 32 Tested with a side airbag Antistatic 7 Washable at C Made of hard-wearing nylon with a surrounding elastic band Durable and resistant black covers with a welt edge (HAZET-blue) Fuel Tank Cover Flex Spout Funnel Suitable for filling common liquids such as oil, fuel or brake fluid Funnel made of polypropylene, flexible spout made of polyethylene, with stainless steel filter Funnel diameter: 65 mm Total length, incl. spout: mm Engine Oil Filling Funnel 2,3 l Made of especially coated anti-slip material Waterproof, oil and grease repellent Cover suitable for almost all fuel tank sizes and surfaces (aluminium, steel, GRP) Regarding fire safety, cover corresponds to ritish and US standards Fed 32 7 Washable at C Cover for the protection of the fuel tank surface from scratches and damages nylon surface Special funnel with bayonet fitting Ensures a direct and tight connection to the oil filling neck at the engine Capacity: 2.3 l Universal use e.g. on AUDI, VW, SEAT, SKODA, MERCEDES-ENZ etc Components and Spare Parts see pages 279 to 25

6 . 9 Flexible Funnel Hearing Protection and Shapeable at ease Usable in any places Resistant to e.g. gasoline, diesel, oil, coolant, hydraulic and brake fluid No longer problems with fluid draining Multifunctional owl Lightweight the lightest of its kind, only g Ergonomically shaped Comfortable and firm fitting Ideal for continuous use Offset band prevents the ear plugs from getting soiled when taking it off Easy replacement of ear plugs (9-) Replacement ear plugs for Hearing Protection and pieces Professional Hearing Protector For professional oil change and cleaning of dirty parts Safe outpour due to circumferential overflow gutter and pouring spout (97-) or tap (97-2) Capacity: 6 l Made of polyethylene With handles With protuberance to deposit small parts With drainer for oil filter Multifunctional owl For professional oil change and cleaning of dirty parts Safe outpour due to circumferential overflow gutter and pouring spout (97-) or tap (97-2) Capacity: 6 l Made of polyethylene With tap for safe and clean outpour With three carrying handles for safe carrying and outpouring Excellent, high level of protection: SNR 36 H 3 M 3 L 26 d Foldable ear muff Light-weight: 22 g only High-quality steel head band and its two point suspension offer optimal protection and high comfort level Especially suited for long-term use Especially suitable for working in areas with high noise exposure Small ear cups assure a high level of attenuation Easy and continuous head band adjustment for a personalized fit 9-97 Components and Spare Parts see pages 279 to 25 7

7 . 9 Safety Glasses Safety Glasses C Wave front optimized lenses allow orthoscopic and fatigue-proof sight. They offer a special plus of wearing comfort especially during long working times and in connection with corrective lenses lunt Scraper G m Hollow Three-Square Scraper Tips ground M N Angle Scraper For the removal of sealing residues 2: long blade 2-: short blade Surface: galvanized 5 M N Gm For work, leisure and sporting activities Extremely scratch resistant Optimal fit Protection for grinding, lathing and milling work etc. Sporty design Perfect adjustment to the head shape Durable anti-fog coating DIN EN 66-6, UV Colourless polycarbonate lens UV 2-.2 Individually adjustable temple length and inclination For work, leisure and sporting activities Extremely scratch resistant Optimal fit Protection for grinding, lathing and milling work etc. Sporty design Perfect adjustment to the head shape Durable anti-fog coating Colourless polycarbonate lens UV 2-.2, supravision NC coating (outside optidur NC inside optidur C Plus) Lightweight cover spectacles, esp. for spectacle wearers, with an unrestricted lateral field of vision Due to the flat base curve, the eye is sufficiently covered Lens has an inclination of, guaranteeing good downward visibility and offering the wearer excellent protection from tripping over Innovative temple concept with X-Streamtechnology offers high level of wearing comfort For removal of underseal (esp. PVC), antidrumming compound, joint sealant, stickers, etc. Scraping of sealing residues, e.g. at the cylinder head Scraping cable channels in Ytong blocks Environmentally friendly working: no formation of dust no formation of noise no formation of chloric or dioxin gas (as it occurs e.g. when burning residues) With replaceable and reversible blades made of HSS bimetal Various applications possible due to different blade shapes and a total length of 27 mm Surface: chrome-plated 5 K Handle only with blade 22- (flat) lade Set for 22 (5 pieces per set) Fine Three-Square Scraper With protective coating made of viscoplastic and impact-resistant plastic material With protection cap M N With exchangeable hard-metal tip 5 M N Replacement hard-metal tip for Wire rush For e.g. steel working rows Trim size: 25 mm Solid wire bristles Wooden body With handle hole K For e.g. sheet steel made of V2A and aluminium rows V2A bristles Wooden body With handle hole K Components and Spare Parts see pages 279 to 25

8 . 9 Tube Cutter Pry ar Set Double-Handled Pry ar for Commercial Vehicles C With solid impact head for maximum stress Hardened and tempered K Grease Gun U For tube cutting Cutting range 6 to 35 mm outside Consistently narrow working radius of 23 mm Forward feed is synchronous to rotation 2 grooved rollers for close-to flare cuts With retracting deburrer stored in frame Spare cutter wheel in handle K Cutter wheel for 2-2 and Tube Cutter Flat and bevelled tips allow application in areas with restricted access With screwdriver handles Solid square blades guarantee high power transmission Set of 3 pieces Pry ar U Capacity: 5 cm 3 With reinforced hose, nozzle tube and 2 nozzles M x Light design, wall thickness mm Reinforced design, wall thickness.5 mm Oiler For tubes made of copper, brass, light metal and PVC rigid Automatic forward feeding due to disc springs Cutting range outside : 3 6 mm Surface: lacquered K Cutter wheel for 2-2 and Machinist s Vice Drop-forged 5 Machinist s Vice 275 N Distance plate (wood) for machinist s vice 275 N for fixing the vice on work benches or tool trolleys 72 HD, 77, 79 W,, K- incl. fixing kit 275 N Distance plate (wood) for machinist s vice 275 N for fixing the vice on tool trolleys Assistent 73-, 76-, 7, 79 fixing kit included For knocking bearings and bearing shells in and out, installing and removing springs, bolts, toothed gears, etc. Surface: bright nickel-plated K For excessive and heavy use during repair work on commercial vehicles, agricultural and building machinery For levering out rotary shaft seal units For checking: cab bearings cardan shaft slackness bearing bushings ball-and-socket joints of the steering tie rod and steering rod Square blade passes through the handle ig, shock-resistant and ergonomic handle offers comfortable grip and allows two-hand operation mm mm x Double-Handled Pry ar for Commercial Vehicles Shock-resistant and ergonomic plastic handle allows two-hand operation Hexagon blade passes through the handle Components and Spare Parts see pages 279 to 25 9 U Capacity: 2 ml, empty K Trimming Knife Multipurpose knife With spare blades deposit One snap-off, straight and hook blade each included Housing made of glass fibre reinforced plastic One-hand operation for blade insertion and locking Safe lock of the blade K Snap-off blades, e.g. for trimming knife 257 (7 break-away parts) x mm set of pieces lades with 2 holes, e.g. for trimming knife 257, set of pieces Hook blades, e.g. for trimming knife 257, set of pieces

9 . 9 Jack-Knife Pick-Up Tool with Claws C A K Magnetic Pick-Up Tool A Quick blade changing With 5 blades Comfortable handle made of impact resistant AS lade magazine with safety lock Thumb cushion enables joint-protecting working M N lades with 3 holes, (e.g. for 257-) set with pieces Mini Utility Knife With permanent magnet Flexible shank Ergonomically shaped plastic handle Lifting capacity: g g g t K Inspection Mirror Quick blade changing lade fastener Convenient handle made of AS Release lever for comfortable blade closing lade magazine with safety lock With 5 spare blades Length: mm Weight:.6 g Spare blades for Set with pieces For the inspection of areas with restricted access With light Thumb wheel on handle for mirror adjustment by 9 Flexible shaft allows further angular adjustment attery handle (2 x MIGNON.5 V) with on off switch Mirror size: 3 x 55 mm Plastic K Universal Shear For cutting thin sheet metal, wires, plastics, carpets, etc. Ergonomic design allows one-hand operation of the locking device With locking device Additionally with round cutter for wire stripping ( or.5 mm 2 ) Plastic handle, with bi-material element for an optimal grip K Mirror and 2 spare bulbs for Spare bulb Telescopic Inspection Mirror Set Pick-Up Tool with Claws Enables picking up non-magnetic items, e.g. electronic components in areas with restricted access Flexible Surface: chrome-plated A Telescopic rod, double hinge joint with tension spring Replaceable mirror (clear mirror glass) with mm stainless steel threaded bar Mirror won t tarnish as polished metal mirrors do Mirror glass encased in rugged stainless steel Set with pieces: Telescopic rod, extension length: 3 7 mm round mirror: 3 mm round mirror: 5 mm rectangular mirror: 65 x 3 mm M N Components and Spare Parts see pages 279 to 25