Protection and Disconnection Equipment for High and Medium Voltage and Transformers Line
|
|
- Brett Melton
- 5 years ago
- Views:
Transcription
1 Protection and Disconnection Equipment for High and Medium Voltage and Transformers Line
2 IUSA is present in Mexico, Europe, Asia, the US, Central and South America. Established in Workforce of over 12,000 employees. Manufacturing facilities established in Mexico and USA. More than 6,000 diversified products for construction, metering and industry. 90% of the companies have ISO-9001:200. UL, ANCE, NMX and ASTM certification, and comply with international regulations applicable to export products. Proprietary infrastructure and logistics with 22 sales and distribution offices in Mexico and the US.
3 CONTENTS I. PORCELAIN INSULATORS II. GLASS INSULATORS III. POLYMER INSULATOR IV. CIRCUIT BREAKER V. PORCELAIN BUSHINGS VI. ARRESTERS VII. DISCONNECTOR BLADES TRANSFORMERS I. PEDESTAL TYPE DISTRIBUTION TRANSFORMERS II. POST TYPE
4 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers 2
5 Spool-Type Porcelain Insulators Applicable Standards: CFE I. PORCELAIN INSULATORS R3 Code Description Pieces per package Telephone spool type insulator 1 slot P Spool type insulator DTP-1323 reel 50 Catalogue number CFE brief description Dry flashover voltage 60Hz Strain-Type Porcelain Insulator Applicable Standards: CFE Wet flashover voltage 60Hz Minimal transversal mechanical resistance Diameter and height Minimal leakage distance kv kv kn mm mm P C 25 12V/ 15H x 82 - R3 Code Description Pieces per package Porcelain strain insulator BT P-1351 ball Porcelain strain insulator BT P-1348 fin Porcelain strain insulator BT P Catalogue number CFE brief description Dry flashover voltage 60Hz Wet flashover voltage 60Hz Minimal transversal mechanical resistance Diameter and height Minimal leakage distance kv kv kn mm mm P R x P R x P R x Line Post-Type Porcelain Insulator Applicable Standards: CFE , R3 Code Description Pieces per package Line post-type porcelain insulator P Line post-type porcelain insulator P Line post-type porcelain insulator P Line post-type porcelain insulator P Line post-type porcelain insulator P-2122 P / ZC Line post-type porcelain insulator P-2130 P / ZC Line post-type porcelain insulator P Line post-type porcelain insulator P Line post-type porcelain insulator P Catalogue number Old CFE brief description Current CFE brief description system voltage Dry flashover voltage 60Hz Wet flashover voltage 60 Hz (kv) Lightning impulse critical flashover voltage (kv) Maximum radio interference voltage 1000 khz Mechanical bending resistance (N-m) P PD 13PDPG1 13, <100 12,5 P PD 22PDPG1 23, <100 12,5 P PD 33PDPG1 34, <200 12,5 P PC 13PCPG3 13, <100 12,5 P PC 22PCPG2 23, <100 12,5 P PC 33PCPG2 34, <200 12,5 P-2125(Wprotected DF) 13PC 13PCPG4 13, <100 12,5 3
6 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers I. PORCELAIN INSULATORS Column-Type Porcelain Insulator Applicable Standards: NMX-J NRF-007-CFE. IEC R3 Code Description Pieces per package Column-type porcelain insulator C8-125-II Column-type porcelain insulator C8-150-II Column-type porcelain insulator C8-170-II Column-type porcelain insulator C8-200-II 1 Catalogue number Old CFE brief description system voltage (kv) Lightning impulse withstand voltage (kv) Wet withstand voltage 60 Hz (kv) Minimum class II leakage distance (mm) Insulator height (mm) Maximum radio interference voltage 1000 khz μv Mechanical bending resistance (N) Mechanical torsion resistance (N-m) C8-125-II CP8-125-II 13, ±1 < ,200 C8-150-II CP8-150-II 23, ±1 < ,500 C8-170-II CP8-170-II 23, ±1 < ,000 C8FA-200-II CP8-200-II 34, ±1 < ,000 Pin-Type Porcelain Insulator Applicable Standards: NMX-J-246-ANCE. CFE R3 Code Description Pieces per package Pin-type porcelain insulator AT P-2851-A 13.8 kv Pin-type porcelain insulator AT P kv Pin-type porcelain insulator AT kv 3 Catalogue number CFE brief description system voltage Dry flashover voltage 60Hz Wet withstand voltage 60 Hz (kv) Positive impulse flashover critical voltage Negative impulse flashover critical voltage Maximum radio interference voltage 1000 khz Breakdown voltage at 60Hz Mechanical bending resistance (N-m) kv kv kv kv kv µv kv kn P-2851-A 13A2 13, < ,36 P A2 23, < ,36 P A 34, < ,36 4
7 Suspension-Type Tempered Glass Insulator Applicable Standards: NRF-018-CFE EC ANSI C29.2. II. GLASS INSULATORS R3 Code Description Pieces per Crate Pallet Suspension-type glass insulator CT Suspension-type glass insulator N Suspension-type glass insulator N-12 C/M Suspension-type glass insulator N Suspension-type glass insulator N-120P Suspension-type glass insulator 160P Suspension-type glass insulator N-160 C/M Suspension-type glass insulator N-111 SN 3 90 Catalogue number CFE brief description Use in zone Mechanical resistance Impact resistance Routine mechanical load 3s Dry flashover at 60Hz Wet flashover at 60Hz Impulse flashover critical voltage (1, 2/50) Minimum leakage distance Test voltage at 50Hz Maximum radio interference voltage at 1 MHz Positive Negative Nm kn kv kv kv kv mm kv µv N-12 13A2 Normal 111 7,0 55, N-12 CM 22A2 Corrosion 111 7,0 55, N-120P 33A Pollution and/ or corrosion , CT-4 Normal 44 5,0 22, ,5 50 N-160P Pollution and/ or corrosion , N-1115N Pollution and/ or corrosion , N-160 Normal N-160 C/M Corrosion N-160 Normal N-160 C/M Corrosion N-12 N-160P N-1115N N-160 N-120P CT-4 5
8 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers III. POLYMERIC INSULATOR / IV. CIRCUIT BREAKER Suspension-Type Synthetic Insulator Applicable standards: IEC NRF-005-CFE. R3 Code Description Pieces per package Pallet Synthetic polymeric Insulator 15kV boxes Synthetic polymeric Insulator 25kV boxes Synthetic polymeric Insulator 35kV boxes Catalogue number CFE brief description system voltage Dry flashover voltage 60Hz *In case of customer request, the mechanical resistance may be 70kN. Wet withstand voltage 60 Hz Positive impulse flashover critical voltage Maximum radio interference voltage 500 khz leakage distance Mechanical resistance to stress* Mechanical resistance to torsion kv kv kv kv µv mm Kn N-m ASSI-15 13SHL45C 13, < ASII-25 23SHL45C 23, < ASII-35 34SHL45C 34, <10 1, Fuse Circuit Breaker It protects system lines and different equipment of lines such as: transformers, capacitor banks, primary and branch lines, etc. Fuse circuit breakers are used in 13.8, 23.0, and 34.5kV distribution systems; they provide reliable protection to interrupt power failures or overloads through the fusion of the fuse element within its range of interrupting capacity. Designed for outdoor service, these are provided with arcing horns to open under load with a portable breakload tool. TIPO C The fuse tube is made of fiberglass, epoxy resin and a vulcanized fiber internal coating, which helps arc interruption during failure or excessive overload conditions. Types of Circuit Breakers C type circuit breaker of the APD family, IUSA brand for areas with normal pollution, nominal voltage of 15, 27, and 38kV. V type circuit breaker of the CPV family, IUSA brand for areas with normal pollution, nominal voltage of 15, 27, and 38kV. TIPO V V type circuit breaker of the CPV-C family, IUSA brand for areas with high pollution, nominal voltage of 15, 27, and 38kV. 6
9 Catalogue number Abbreviations APD = IUSA description for type C circuit breakers. CPV = IUSA description for type V circuit breakers. CPV-C = IUSA description for type V circuit breakers for areas with high pollution. 15, 27, and 38 = Maximum design voltage in kv. 05 and 12 = Asymmetrical interrupting current in ka. 100 = current in A. IV. CIRCUIT BREAKERS Applicable standards: ANSI C Specification: CFE V R3 Code Description Pieces per Package Pollution circuit breaker CPV-C V Pollution circuit breaker CPV-C V Pollution circuit breaker CPV-C V Circuit breaker APD C Circuit breaker APD C Circuit breaker APD C Circuit breaker CPV V Circuit breaker CPV V Circuit breaker CPV V Spare Bobbin APD E Spare Bobbin APD E20 20 Catalogue number CFE brief description Maximum design voltage in effective kv Dry at 60Hz 1 min effective kv From terminal to ground, wet, at 60 Hz Effective kv Wave impulse 1,2 / 50 Peak kv From terminal to terminal Dry at 60Hz 1 min effect. kv Wave impulse 1,2 / 50 Test voltage at 60Hz Maximums at 1MHz Asymmetric Leakage distance Opening angle Peak kv kv μv A A mm º APD CF , , CCF , , CCF , , APD CCF , , CCF , , APD CCF , CCF , CPV CCF , , CCF , , CCF , , CPV CCF , , CCF , , CPV CCF , CCF , CPV-C CCF-C , , CCF-C , , CCF-C , , CPV-C CCF-C , , CCF-C , , CPV-C CCF-C , CCF-C ,
10 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers V. PORCELAIN BUSHING Low Voltage Porcelain Bushing Porcelain bushing with eyebolt and flange for low voltage. Device used in distribution transformers, on the low voltage side, to conduct a specific current from the winding, thus providing effective insulation outdoors. R3 Code Description Pieces per package Porcelain low voltage bushing H mm 100A Porcelain low voltage bushing H mm 250A Porcelain low voltage bushing H mm 500A Porcelain low voltage bushing H mm 750A Porcelain low voltage bushing A 100A Porcelain low voltage bushing A 500A/750A Porcelain low voltage bushing 750A 6 Technical Specifications Values Unit Type of Insulation (B.T) 1.2 kv Maximum design voltage to ground 0.75 kv Basic level of insulation to the BIL impulse Complete wave 1,2 x 50 µs 30 kv Dry (1 min) 10 kv at 60 Hz Withstand voltage Wet (10 sec) 6 kv To the complete wave impulse 1,2x50 30 kv Flashover to the cut wave impulse at 1,2 x 50 µs Peak voltage 36 kv Minimum time 1 µs Maximum operation altitude 3,000 m Operation temperature range from -10 to +50 C Catalog number Current Full Bushing Only the porcelain at H A H H A H H A 1,000 8
11 Medium Voltage Porcelain Bushing Distribution-Type Porcelain medium voltage bushing with connector, inner flange, and outer flange for distribution equipment. Device used in distribution transformers, on the medium voltage side, to conduct a specific current to the windings, providing effective insulation outdoors. The porcelain can be provided as a stand-alone unit, or the bushing with interior cable or copper rod. Applicable Standards: NMX-J-234-ANCE. NRF-008-CFE. R3 Code Description Pieces per Package Medium voltage bushing CI mm 15.0 kv Medium voltage bushing CC mm 15.0 kv Medium voltage bushing CH mm 15.0 kv Medium voltage bushing CI mm 25.0 kv Medium voltage bushing CC mm 25.0 kv Medium voltage bushing CH mm 25.0 kv Medium voltage bushing CI mm 34.5 kv Medium voltage bushing CC mm 34.5 kv Medium voltage bushing CH mm 24.5 kv Medium voltage bushing CITT mm 15.0 kv Medium voltage bushing CCTT mm Medium voltage bushing CHTT mm Medium voltage bushing CCTT mm 34.5 kv Medium voltage bushing LH 15.0 kv Medium voltage bushing LH mm 25.9 kv Medium voltage bushing CB 25.0 kv Medium voltage bushing LA 34.5 kv Medium voltage bushing CI 25.0 kv Medium voltage bushing CC 34.5 kv Medium voltage bushing LC 15.0 kv Medium voltage bushing LI mm 23.0 kv Medium voltage bushing CA 34.5 kv 2 V. PORCELAIN BUSHING ELECTRICAL CHARACTERISTICS Technical Specifications Values Unit system voltage TT 34.5 TT kv Type of Insulation kv Maximum design voltage to ground kv BIL-wave 1,2 x 50 µs kv Dry (1 min) kv at 60 Hz Withstand voltage Wet (10 sec) kv To the complete wave impulse kv Peak voltage kv Minimum flashover time µs Critical flashover voltage to the cut wave impulse Radio interference maximum voltage at 1MHz µv Flashover distance mm Minimum leakage distance mm voltage 250 A Maximum operation altitude 3,000 m Temperature range from -10 to +50 C 9
12 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers voltage Stand-alone porcelain NOTES: C-SHORT TAIL L-LONG TAIL TT-COAST TYPE M8 connector, cable, exterior flange seal, flange seal, brackets, M10 screws COMPONENTS M8 connector, cable, 3/8 seal without flange V. PORCELAIN BUSHING / VI. ARRESTERS M8 connector, cable, 3/8 seal, interior flange, seal for flange, spring M12 connector and rod, cap and seal for flange, brackets, M12 screws and nuts (A) (B) (C) (I) (H) 13,8 kv P-18415CA P-18415CB P-18415CC P-18415CI P-18415CH P-18415LA P-18415LC P-18415LI P-18415LH 23 kv P-18415CATT P-18415CBTT P-18415CCTT P-18415CITT P-18415CHTT P-18423CA P-18423CB P-18423CC P-18423CI P-18423CH 34,5 kv P-18423LA P-18423LB P-18423LC P-18423LI P-18423LH P-18434CA P-18434CB P-18434CC P-18434CI P-18434CH P-18434LA P-18434LB P-18434LC P-18434LI P-18434LH P-18434CATT P-18434CBTT P-18434CCT P-18434CITT P-18434CHTT A B C I H Metal Oxide Ceramic Arresters Applicable Standards: IEC NMX-J-321-ANCE. CFE-43 VA400. R3 Code Description Pieces per box Pallet Distribution arrester 9/10kV APMOA 10kA Distribution arrester 9/10kV APMOAC 10kA coast type Distribution arrester 12kV APMOA 10kA Distribution arrester 12kV APMOAC 10kA coast type Distribution arrester 18kV APMOA 10kA Distribution arrester 18kV APMOAC 10kA coast type Distribution arrester 21kV APMOA 10kA Distribution arrester 21 kv APMOAC 10kA coast type Distribution arrester 27kV APMOA 10kA Distribution arrester 27kV APMOAC 10kA coast type Distribution arrester 30kV APMOA 10kA Distribution arrester 30kV APMOAC 10kA coast type
13 Catalogue number CFE short description Polymer Arrester Pollution level arrester voltage Metal oxide arresters with polymeric enclosure. They are smaller and weigh less. Great flexibility to achieve the leakage distance values through outer insulator rings, shortening the length of the arrester body. Its silicone enclosure is greatly hydrophobic and UV resistant; it limits leakage currents, eliminates the costs of washing and can increase the life of the equipment. They can be used in highly polluting environments. Certified and approved by the CFE (LAPEM) laboratories. Applicable Standards: IEC NMX-J-321-ANCE. NERF-004-C.F.E. INSULATION WITHSTAND TENSION To impulse 1.2/50 μ 60Hz effective in wet 1 min (effective kv) Minimum leakage distance mm T.C.O. (effective kv) VI. ARRESTERS To voltage impulse due to movement 30/60 μ (peak kv) To steep impulse voltage 1/20 μ a (peak kv) To lightning voltage impulse 8/20 μ a (peak kv) APMOA 10 ADOM-10 MEDIUM , ,4 26,5 39, APMOAC-10 ADOMC-10 HIGH , ,4 26,5 39, APMOA - 12 ADOM-12 MEDIUM , ,2 31,8 47, APMOAC-12 ADOMC-12 HIGH , ,2 31,8 47, APMOA -18 ADOM-18 MEDIUM , ,3 47,7 70, APMOAC-18 ADOMC-18 HIGH , ,3 47,7 70, APMOA-21 ADOM-21 MEDIUM , ,6 74, APMOAC-21 ADOMC-21 HIGH , ,6 74, APMOA-27 ADOM-27 MEDIUM , ,5 95, APMOAC-27 ADOMC-27 HIGH , ,5 95, APMOA -30 ADOM-30 MEDIUM , ,4 79,5 105, APMOA -30 ADOMC-30 HIGH , ,4 79,5 105, R3 Code Description Pieces per Package DISTRIBUTION ARRESTER 12kV APSIL-10kA DISTRIBUTION ARRESTER 24kV APSIL-10kA DISTRIBUTION ARRESTER 30kV APSIL-10kA DISTRIBUTION ARRESTER 10kV APSIL-10kA DISTRIBUTION ARRESTER 10kV APSILC-10kA DISTRIBUTION ARRESTER 10kV APSILC-10kA MTR DISTRIBUTION ARRESTER 12kV APSILC-10kA DISTRIBUTION ARRESTER 12kV APSILC-10kA MTR DISTRIBUTION ARRESTER 15kV APSIL-10kA DISTRIBUTION ARRESTER 15kV APSILC-10kA DISTRIBUTION ARRESTER 15kV APSILC-10kA MTR DISTRIBUTION ARRESTER 18kV APSIL-10kA DISTRIBUTION ARRESTER 18kV APSILC-10kA DISTRIBUTION ARRESTER 18kV APSILC-10kA MTR DISTRIBUTION ARRESTER 21kV APSIL-10kA DISTRIBUTION ARRESTER 21kV APSILC-10kA DISTRIBUTION ARRESTER 21kV APSILC-10kA MTR DISTRIBUTION ARRESTER 24kV APSIL-10kA L y F DISTRIBUTION ARRESTER 24kV APSILC-10kA DISTRIBUTION ARRESTER 24kV APSILC-10kA MTR 1 Maximum value of partial discharges (PD) 11
14 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers VI. ARRESTERS R3 Code Description Pieces per package DISTRIBUTION ARRESTER 27kV APSIL-10kA DISTRIBUTION ARRESTER 27kV APSILC-10kA DISTRIBUTION ARRESTER 27kV APSILC-10kA MTR DISTRIBUTION ARRESTER 30kV APSILC-10kA DISTRIBUTION ARRESTER 30kV APSILC-10kA MTR 1 Catalogue number CFE short description Pollution level arrester voltage WITHSTAND VOLTAGE TO INSULATION To impulse 1.2/50 μ (peak kv) 60Hz effective in wet 1 min (effective kv) Minimum leakage distance (mm) T.C.O. (effective kv) To voltage impulse due to movement 30/60 μ (peak kv) Maximum residual voltage To steep impulse voltage 1/20 μ a (peak kv) To lightning voltage impulse 8/20 μ (peak kv) APSIL-10 ADOM-10 MEDIA , , ADOMC-10 ALTA , , APSIL-12 ADOM-12 MEDIA , , ADOMC-12 ALTA , , APSIL-18 ADOM-18 MEDIA , , ADOMC-18 ALTA , , APSIL-21 ADOM-21 MEDIA , ADOMC-21 ALTA , APSIL-27 ADOM-27 MEDIA , ADOMC-27 ALTA , APSIL-30 ADOM-30 MEDIA , , ADOMC-30 ALTA , , Maximum value of partial discharges IUSA APLEA Polymer Arrestor The IUSA APLEA (Line Arrestors with Air Gap) is equipment to be installed in parallel with line insulators, without mechanical load, that limits surges and arc currents caused by lighthning discharges through an air gap electrode and metal oxide nonlinear resistors that extinguish the arc produced between the electrode and the distribution line cable. Opposed to conventional arrestors, these are disconnected from the distribution line by an air gap that allows controlling the discharges it extinguishes, as demonstrated in the tests performed, which obtained satisfactory results according to specification CFE The design of its silicon rubber sleeve ensures that the arrestor will not release highspeed solid residues and is compliant to be installed under normal and high pollution environmental conditions. IUSA brochure CFE short description system voltage (kv) Critical flashover current to impulse by positive lightning 1,2/50fs (kv) Minimum flashover current at 60Hz dry (kv) Minimum flashover current at 60Hz we t (kv) Length (mm) arc distance (mm) APLEA13 ALEA APLEA23 ALEA APLEA33 ALEA
15 Single-Pole Or Monopole Blade (P) Overview The blades are single-pole or monopole operation type pole unloaded. Outdoors service for distribution substations. design voltage from 15 to 38kV. Rated from 630 to 2000 A. Basic lightning Impulse insulation Level (BIL) from 125 to 200kV. Applicable for the distribution system. International standards: IEC IEC National Standards: NMX-J-356-ANCE. Specifications: CFE V VII. DISCONNECTOR BLADES R3 Code Description Pieces per package Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade P Single-pole Blade XP Catalogue number CFE short description design voltage of the equipment Vn effective kv BASIC LIGHTNING IMPULSE INSULATION LEVEL (BIL) KV (PEAK) Closed to ground and between poles Open through the distance of insulation WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) Closed to ground and between poles Open through the distance of insulation current TEST VALUE OF THE WITHSTAND CURRENT Short duration Peak value dry 1 min. wet 10 sec. dry 1 min. wet 10 sec. A ka (1 sec) ka P CSP , P CSP , P CSP P CSP , P CSP , P CSP P CSP ,
16 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers VII. DISCONNECTOR BLADES Three-Pole Blade (TP-II) The three-pole blades are of the no-load operation group. Outdoors service for distribution substations. Mounting type: vertical, horizontal. design voltage from 15,5 to 38 kv. current from 630 to 2000 A. Basic lightning Impulse insulation Level (BIL) from 125 to 200 kv Applicable to the distribution system. International. R3 Code Description Pieces per package Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Three-pole blade TPII Catalogue number CFE short description design voltage of the equipment Vn effective kv BASIC LIGHTNING IMPULSE INSULATION LEVEL (BIL) KV (PEAK) Closed to ground and between poles Open through the distance of insulation WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) Closed to ground and between poles Open through the distance of insulation current TEST VALUE OF THE WITHSTAND CURRENT Short duration Peak value dry 1 min. wet 10 sec. dry 1 min. wet 10 sec. A ka (1 sec) ka TPII CSP , TPII CSP , TPII CSP TPII CSP , TPII CSP , TPII CSP TPII CSP ,
17 VII. DISCONNECTOR BLADES Vertical Opening Blade (TTR6) For Distribution And Transmission The TTR6 blades are group operation non-load blades. Outdoors service for distribution substations. Mounting type: vertical, horizontal. design voltage from 15 to 170 kv. current design from 630 to 2000 A. Basic lightning Impulse insulation Level (BIL) from 125 to 750 kv. It can be supplied for design voltages above 123 kv with ground blade as required. International standards: IEC IEC National Standards: NMX - J-356. Specifications: CFE V CFE V R3 Code Description Pieces per package Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade TTR Blade AG-7 TTR-6 115/138 kv Blade AG-7 TTR kv 1 TTR6 FOR DISTRIBUTION UP TO 25.8KV BASIC LIGHTNING IMPULSE INSULATION LEVEL (BIL) KV (PEAK) WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) TEST VALUE OF THE WITHSTAND CURRENT Catalogue number CFE short description design voltage of the equipment Vn effective kv Closed to ground and between poles Open through the distance of insulation Closed to ground and between poles Open through the distance of insulation current Short duration Peak value dry 1 min. wet 10 sec. dry 1 min. wet 10 sec. A ka (1 sec) ka TTR CSA , TTR CSA , TTR CSA , TTR CSA TTR CSA
18 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers VII. DISCONNECTOR BLADES TTR6 FOR TRANSMISSION SYSTEM BASIC LIGHTNING IMPULSE INSULATION LEVEL (1,2/50 MICROSEC.) (PEAK KV) WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) TEST VALUE OF THE WITHSTAND CURRENT Catalogue number CFE short description design design voltage of the voltage of blade system Vn effective effective kv kv Common values Open between contacts of the blade Common values Open between contacts of the blade current Short duration Peak value Dry/wet Dry/wet 10 1 min. sec. A ka (1 sec) ka TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV TTR CSA MH/MV Central Lateral Opening Blade (DRV) For Distribution And Transmission The DRV blades are of the central lateral opening type; the position of the insulators is in V, operating in non-load group, with or without ground connection, manually operated or motorized mechanisms. Outdoors service for distribution substations. Mounting type: vertical, horizontal. design voltage from 72.5 to 170kV. current from 800 to 2000 A. Basic lightning Impulse insulation Level (BIL) from 450 to 750kV. It can be supplied for design voltages above 123 kv with ground blade as required. International standards: IEC IEC National Standards: NMX-J-356-ANCE. Specifications: CFE V CFE V R3 Code Description Pieces per package Knife-blade DRV Knife-blade DRV Knife-blade DRV Knife-blade DRV Knife-blade DRV A 1 16
19 VII. DISCONNECTOR BLADES DRV BLADES FOR DISTRIBUTION BASIC LIGHTNING IMPULSE INSULATION LEVEL (1,2/50 MICROSEC.) (PEAK KV) WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) TEST VALUE OF THE WITHSTAND CURRENT Catalogue number CFE short description design Closed to ground voltage of the system and between Vn effective kv poles Open through the distance of insulation Open through the Closed to ground distance and between poles of insulation dry/wet dry/wet A ka (1 sec) ka 1 min. 1 min. DRV CSV MV/MH DRV CSV MV/MH DRV CSV MV/MH DRV CSV MV/MH current Short duration Peak value Catalogue number design voltage of the system Vn effective kv DRV BLADES FOR TRANSMISSION SYSTEM design voltage of the blade Vn effective kv BASIC LIGHTNING IMPULSE INSULATION LEVEL (1,2/50 MICROSEC.) (PEAK KV) Common values Open between the contacts of the blade WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) Common values Open between the contacts of the blade dry/wet current TEST VALUE OF THE WITHSTAND CURRENT Short duration Peak value dry/wet 1 min. 1 min. A ka (1 sec) ka DRV DRV DRV DRV DRV DRV DRV DRV DRV DRV DRV DRV Central Lateral Double Opening Blade (TTT-7) TTT-7 blades are of central lateral double opening, with three columns of insulators. It has a rotating insulator at the center of each pole. It operates in the non-load group; with or without ground connection, motorized drive mechanisms of the main blade. Mounting type: vertical, horizontal. design voltage from 245 to 420kV. Rated from 1250 to 3150 A. Basic lightning Impulse insulation Level (BIL) from 1050 to 1550kV. International standards: IEC IEC National Standards: NMX-J-356-ANCE. Specifications: CFE V
20 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers VII. DISCONNECTOR BLADES R3 Code Description Pieces per package Blade TTT A Blade TTT NO Blade TTT /1600/ Blade TTT Blade TTT Blade TTT Blade TTT-7 AG 400kV Blade TTT-7 AG-7 230kV Blade TTT-7 AG kv 1 Catalogue number design voltage of the system Vn effective kv design voltage of the blade Vn effective kv TTT-7 (245 kv) BASIC LIGHTNING IMPULSE INSULATION LEVEL (1,2/50 MICROSEC.) (PEAK KV) Closed to ground and between phases Open through the contacts of the blade WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) Closed to ground and between poles Open through the distance of insulation TEST VALUE OF THE WITHSTAND CURRENT Dry/ Wet 1min. Dry/ Wet 1 min. A ka (1 sec) ka TTT TTT (+205) current Short duration Peak value Catalogue number voltage of the system effective kv design voltage of the blade Vn effective kv BASIC LIGHTNING IMPULSE INSULATION LEVEL (BIL) KV (PEAK) Closed to ground and between poles Open through the contacts of the blade TTT-7 (429 kv) WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) Closed to ground and between poles Open through the distance of insulation BASIC IMPULSE INSULATION LEVEL BY MOVEMENT KV (EFFECTIVE) Closed to ground and between poles Open through the distance of insulation current TEST VALUE OF THE WITHSTAND CURRENT Short duration Dry/ Wet 1min. Dry/ Wet 1min. A ka (1 sec) ka TTT (+245) (+345) TTT (+315) (+450) TTT (+245) (+345) TTT (+315) (+450) Peak value COGC Blade COGC equipment is comprised by blades in charged group operation, side opening and position of insulators in V. Horizontal and vertical utility pole mount without ground connection blade; manual drive mechanism. Outdoor service for the distribution system. Rated voltage design from 15.5 to 25.8 kv. current of 630 A. Basic lightning Impulse insulation Level (BIL) from 125 to 170kV. International standards: IEC IEC National standards: NMX-J-323. Specifications NRF-006-CFE. 18
21 VII. DISCONNECTOR BLADES R3 Code Description Pieces per package Pole-mounted blade COGC Pole-mounted blade COGC Pole-mounted blade COG Pole-mounted blade COG Pole-mounted blade COG BASIC LIGHTNING IMPULSE INSULATION LEVEL (BIL) KV (PEAK) WITHSTAND VOLTAGE TO SYSTEM FREQUENCY KV (EFFECTIVE) TEST VALUE OF THE WITHSTAND CURRENT Catalogue number CFE short description design voltage of the equipment Vn effective kv Closed to ground and between poles Open through the distance of insulation Closed to ground and between poles Open through the distance of insulation current Short duration Peak value dry 1 min. wet 10 sec. dry 1 min. wet 10 sec. A ka (1 sec) ka COGC15125H/V COGC V COG15125H/V COG V COGC25150H/V COGC V COG25150H/V COG V COGC25170H/V COGC V COG25170H/V COG V
22 IUSA Transformers TRANSFORMERS 20
23 Single-Phase Pad-Mount Type Distribution Transformers Single-phase distribution pedestal transformers. From 25 kva to 100 kva in carbon steel or stainless steel. Primary voltage: Volts 13200YT/7620. Secondary voltage: 240/120 volts. Secondary connection: 1 phase, 3 wires. Frequency: 60 Hz. Overheating temperature 65º C or 55 C for the coast type. Branch joints to full capacity: (4) 2 up, 2 down 2.5% each. Operating altitude: 2300 meters above sea level. Cooling type: self-cooling-oa. Overload protection: oil-immersed bayonet expulsion fuse, operated from the outside in series with another internal-mount current-limiting fuse. Secondary circuit, oil operation (optional). High-voltage terminals: dead front with two well bushings, one in ring configuration and the other in radial operation. Low-voltage terminals: three spade-type bushings. Manufacturing standards: NMX-J-285-ANCE. Specification: K-CFE TRANSFORMERS I. PEDESTAL TYPE DISTRIBUTION TRANSFORMERS Three-Phase Pedestal Distribution Transformers Three-phase distribution pedestal transformers. From 30 to 500 kva in carbon steel or stainless steel. Primary Voltage: 13200YT/7620 volts. Primary Connection: star. Secondary Voltage: 220/127 Volts. Secondary connection: star. Frequency: 60 Hz. Overheating temperature 65º C or 55 C for coast type. Branch joints to full capacity: (4) 2 up, 2 down 2.5% each. Operating altitude: 2300 meters above sea level. Cooling type: self-cooling-oa. Overload protection, oil-immersed bayonet expulsion fuse, operated from the outside in series with another internal-mount current-limiting fuse. With partial or full range, two-position disconnector. High-voltage terminals: dead front with well bushings up to 500 kva, 200 amperes. Well bushings up to 500 kva, with six bushings for ring configuration operation and three for radial operation. Low-voltage terminals: four spade-type bushings. Manufacturing standards: NMX-J-285-ANCE. Specification: K-0000 CFE-07 and K We also carry the NMX-J-285 Delta-Star and Star-Star from 225 kva to 2500 kva. Class 25 kv and 34.5 kv in development. 21
24 IUSA Protection Transformers and Disconnection Equipment for High and Medium Voltage and Transformers TRANSFORMERS II. POST TYPE IUSA Prisma Phase Converter Post-Type The PRISMA phase converter operates by delivering three-phase electric power from a single-phase source. It operates in medium voltage with two phases, two wires, and provides in low voltage three-phase voltage values on four wires. This differentiates the PRISMA IUSA phase converter from transformers, selftransformers, or converters, whether electronic, with capacitors, or of the generator type. Our converter behaves as a voltage source connected at medium voltage to an infinite bar (as could be the medium voltage terminals from the power supply company at 33kV, 25kV, 15kV), limiting the power delivered to working elements of the equipment, delivering three-phase power on the low voltage side (it is reversible). Thus, three-, two-, or single-phase loads resistive, inductive, or capacitive can be connected to its output terminal blocks at any secondary voltage value used worldwide. IUSA Prisma Phase Converter Post-Type CLASS Primay voltage volts volts volts Secondary voltage It can be: 440/254 volts, 380/220 volts, 220/127 volts, or any that is necessary. Frequency 60 Hz Overheating 65 or 55 C for warm climate Operating altitude 2300 meters above sea level Type of cooling OA Surge protection None on post type Medium voltage terminals Bushings with ring terminals according to the voltage required. Low voltage terminals Low voltage bushings with ring terminal. Specification PRISMA IUSA phase converter for distribution, post type and substation type (ETO-120-2/3, 240-2/3). Standards applicable to product The same specification. APPROXIMATE DIMENSIONS TYPE CLASS kva LENGTH WIDTH HEIGHT WEIGHT POST mm mm mm kg
25 IUSA Prisma Pedestal Phase Converter The PRISMA phase converter operates by delivering three-phase electric power from a single-phase source. It operates in medium voltage with two phases, two wires, and provides in low voltage three-phase voltage values on four wires. This differentiates the PRISMA IUSA phase converter from transformers, self-transformers, or converters, whether electronic, with capacitors, or of the generator type. Our converter behaves as a voltage source connected at medium voltage to an infinite bar (as could be the medium voltage terminals from the power supply company at 33kV, 25kV, 15kV), limiting the power delivered to working elements of the equipment, delivering three-phase power on the low voltage side (it is reversible). Thus, three-, two-, or single-phase loads resistive, inductive, or capacitive can be connected to its output terminal blocks at any secondary voltage value used worldwide. IUSA Prisma Pedestal Phase Converter TRANSFORMERS POST TYPE CLASS Primay voltage volts volts volts Secondary voltage It can be: 440/254 volts, 380/220 volts, 220/127 volts, or any that is necessary. Frequency 60 Hz Overheating 65 or 55 C for warm climate Operating altitude 2300 meters above sea level Type of cooling OA Surge protection Through limiting fuses according to its capacity. Medium voltage terminals Insert type, according to its voltage. Low voltage terminals Blade type, according to required capacity. Two-pole medium voltage breaker switch according to its capacity. Specification PRISMA IUSA substation type phase converter (ETO-120-2/3P, 240-2/3P). APPROXIMATE DIMENSIONS TYPE CLASS kva LENGTH WIDTH HEIGHT WEIGHT POST mm mm mm kg
26 IUSA Protection and Disconnection Equipment for High and Medium Voltage and Transformers 24
27
28 PASTEJÉ HEADQUARTERS Km 109, Carretera Panamericana México Querétaro Jocotitlán, Edo. Méx. C.P , México For further information: EXPORTS Tel ext
HIGH VOLTAGE SURGE ARRESTER SPECIFICATION
HIGH VOLTAGE SURGE ARRESTER SPECIFICATION Applications: (Polymer housed MOA for 110kv) (The polymer housed MOA for 10kv) (Porcelain housed MOA for 220kv) (35kv MOA without gaps for middle phase) (110kv
More informationType HS PEXLIM-P Surge Arresters Maximum System Voltage 123 kv to 800 kv
Type HS PEXLIM-P Surge Arresters Maximum System Voltage 123 kv to 800 kv HS PEXLIM-P Metal Oxide Surge Arrester HS PEXLIM-P Surge Arresters are used for the protection of switchgear, transformers and other
More informationEMPAC Metal enclosed capacitor bank for wind applications
EMPAC Metal enclosed capacitor bank for wind applications Introduction The EMPAC is a Metal Enclosed Capacitor Bank suitable for voltages between 1 kv and 36 kv for reactive compensation in MV networks
More informationEnergy Division. PCA Single Column Polymeric Surge Arrester
Energy Division PCA Single Column Polymeric Surge Arrester Bowthorpe EMP pioneered the development of the polymeric composite housed surge arrester in the early 1980 s and since 1986 has a proven service
More information3EK7 Medium Voltage Silicone Insulated Surge Arresters
3EK7 Medium Voltage Silicone Insulated Surge Arresters Power Transmission and Distribution Setting new Standards The 3EK7 s mechanical features: Glass-collared MOV, Silicone rubber housing, FRP rods and
More informationIndependent Testing Laboratory for High Voltage Equipment
T E S T I N G L A B O R A T O R Y Independent Testing Laboratory for High Voltage Equipment 1 CHALLENGING ENVIRONMENT The primary concern for utilities is to ensure grid reliability, efficiency, and security.
More informationOutdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications
Outdoor live tank vacuum circuit breaker Type OVB-VBF for 24/36/40.5 kv applications ABB a global leader ABB is a global leader in power and automation technologies that enable utility and industry customers
More informationTechnical Specification for 33 KV 200 AMPs,H.G,Fuse set.
Technical Specification for 33 KV 200 AMPs,H.G,Fuse set. 1. SCOPE:- This specification covers the manufacture, testing and supply of 33KV 200 Amps, H.G. Fuse sets 2. The 33 KV H.G. Fuses shall be suitable
More informationMEDIUM VOLTAGE NETWORKS
MEDIUM VOLTAGE NETWORKS LIGHTNING ARRESTERS & INSULATORS SICAME GROUP OUR EXPERIENCE With 25 years of experience in the field of over protection for medium lines, DERVASIL designs and manufactures zinc
More informationPRECISE HIGH VOLTAGE DISTRIBUTION FUSE CUTOUT
PRECISE HIGH VOLTAGE DISTRIBUTION FUSE CUTOUT COS 38kV 100A 8kA asym. Type PGC Parallel groove terminal bronze with tin plated NEMA Bracket type B Upper contact copper with silver plated Cap - Cast bronze
More informationCP Automatic capacitor bank
CP 254 - Automatic capacitor bank STE-CP254_V2_général.doc Page 1 CP 254 - General presentation CP 254 is a range of MV capacitor banks designed to be used in electrical networks up to 36kV. The capacitor
More informationType POLIM-S Surge Arresters Maximum System Voltage 2.52 to 245 kv
Type POLIM-S Surge Arresters Maximum System Voltage 2.52 to 245 kv POLIM-S Metal Oxide Gapless Surge Arresters POLIM-S Surge Arresters are used for the protection of switchgear, transformers and other
More informationGlass insulators for kv overhead lines and substations. Global Insulator Group
Global Insulator Group 6-210 Katusepapi, Tallinn, 11412, Estonia tel +372-622-8118, fax +372-622-8119, cell +372 522-3551 e-mail: ved@gig-group.com, puchkov@gig-group.com www.gig-group.com Glass insulators
More informationDEPARTMENT OF ELECTRICAL ENGINEERING DIT UNIVERSITY HIGH VOLTAGE ENGINEERING
1 DEPARTMENT OF ELECTRICAL ENGINEERING Introduction to High Voltage Testing It is essential to ensure that the electrical equipment is capable of withstanding the overvoltages that are met within the service.
More informationpower cable accessories
power cable accessories kv up to 4 kv Completing the picture based on experience is the future nkt cables GmbH NKT was established in 89 as cable manufacturer. In 999 NKT A/S Denmark merged with Felten
More informationINTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
More informationType M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
More informationpower pazifik Metal Oxide Surge Arrester with composite polymer insulator Type series SBK-I to IV /10.3
Manufactured by: Metal Oxide Surge Arrester with composite polymer insulator Type series SBK-I to IV-6... 150/10.3 BT-A3/8 Surge Arresters housed in polymer housing, developed to protect switchgear, over
More informationGROUP D. Switch & Protective device.
GROUP D Switch & Protective device PYUNGIL Bldg., 147-10, Gwanyang 2-dong, Dongan-gu, Anyang-si, Gyeonggi-do, 431-808, Korea Tel : 82-31-420-0~3 FAX : 82-31-424-7300 www.pyungil.com Pole-mounted SF Insulated
More informationDead Tank Circuit Breaker 145PM40-C Compact design with enhanced reliability
Dead Tank Circuit Breaker 145PM40-C Compact design with enhanced reliability ABB innovations for changing demands ABB (www.abb.com) is a leader in power and automation technologies that enables utility
More informationVEIKI-VNL Electric Large Laboratories Ltd. H-1158-Budapest, Vasgolyó utca 2-4. HUNGARY
VEIKI-VNL Electric Large Laboratories Ltd. H-1158-Budapest, Vasgolyó utca 2-4. HUNGARY VEIKI-VNL Ltd. VEIKI-VNL Electric Large Laboratories Ltd. is an independent accredited testing member laboratory of
More informationSurge Arresters. UltraSIL Housed VariSTAR Station Class Surge Arresters GENERAL CONSTRUCTION
Surge Arresters UltraSIL Housed VariSTAR Station Class Surge Arresters Electrical Apparatus 235-88 GENERAL Cooper Power Systems has set a new standard of excellence for polymerhoused station class surge
More informationTechnical Specification for Pole Mounted Capacitor Rack
Technical Specification for Pole Mounted Rack Page 1 1. Scope and Function a) Pole mounted capacitor racks shall be installed on a distribution feed as an economical means of applying capacitor units to
More informationSurge Arresters. UltraSIL Polymer-Housed Evolution (10 ka) Surge Arresters. General. Construction. features
Surge s Electrical Apparatus 235-99 General Cooper Power Systems set the standard for design, manufacturing and delivery of polymeric distribution arresters with the UltraSIL polymerhoused arrester family.
More informationDRIESCHER Y WITTJOHANN, S.A. MEDIUM VOLTAGE SOLUTIONS
DRIESCHER Y WITTJOHANN, S.A. MEDIUM VOLTAGE SOLUTIONS TECHNICAL SPECIFICATION LOAD BREAK DISCONNECTOR SWITCHES WITHOUT FUSE HOLDER UIT FUSE HOLDER SECTION CONTENTS PAGE 1 General Features 3 2 Standards
More information3EQ Composite Housed Surge Arresters
Power Transmission and Distribution 3EQ Composite Housed Surge Arresters Saving Money and Space, Gaining Reliability A perfect Combination of Cost-Savings, Safety and Reliability 3EQ Surge Arresters: Your
More informationTransformer bushings, type GOH. Technical guide
Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required
More informationZinc Oxide Surge Arrester EXLIM R
Zinc Oxide Surge Arrester EXLIM R Protection of switchgear, transformers and other equipment in high systems against atmospheric and switching overs. For use when requirements of lightning intensity, energy
More informationCONTENTS About the company 1. Low-voltage arresters LVA type 2. Metal-oxide surge arresters for distribution systems. 3.
CONTENTS About the company 4 1. Low-voltage arresters LVA type 5 2. Metal-oxide surge arresters for distribution systems. 6 2.1 PA-DM type 6 Dimensions of arresters of PA-DM 9 2.2 PA-DH types 10 Dimensions
More information3EQ Composite Housed Surge Arresters Saving Money and Space, Gaining Reliability
3EQ Composite Housed Surge Arresters Saving Money and Space, Gaining Reliability Power Transmission and Distribution 1 A perfect Combination of Cost-Savings, Safety and Reliability 3EQ Surge Arresters:
More informationOIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench
More informationSilicone Suspension/Tension Insulator 120kN. up to LIWV 450kV (BIL)
Silicone Suspension/Tension Insulator 120kN up to LIWV 450kV (BIL) CABLE SYSTEMS FOR ENERGY & ROLLING STOCK APPLICATIONS MV Silicone Tension Insulators The high tensile strength of glass fibre has been
More informationSurge arrester POLIM-H..SD
Data sheet Surge arrester POLIM-H..SD Technical data Classification according to EN 50526-1 and IEC 62848-1 Nominal discharge current I n (8/20 µs) 10 ka peak Class DC-B High current impulse I hc (4/10
More informationType L Cutouts. UltraSIL Polymer-Insulated and Porcelain Type L Open Distribution Cutout. Description
Type L Cutouts UltraSIL Polymer-Insulated and Porcelain Type L Open Distribution Cutout Electrical Apparatus 327-30 Description Cooper Power Systems has set a new standard of excellence for polymer distribution
More information3EP1 Surge Arrester. Metal-oxide surge arrester without series gaps for high-voltage systems up to U m. = 170 kv
3EP1 Surge Arrester Metal-oxide surge arrester without series gaps for high-voltage systems up to U m = 170 kv Rated voltage up to 180 kv Nominal discharge current 10 ka, 8/20 µs Line discharge class LD1,
More informationNXPLUS C Single busbar. Maintenance-free for lifetime
NXPLUS C Single busbar Maintenance-free for lifetime Energy Distribution Welcome! Page 2 Content Overview Technical data Typicals Panel design Circuit-Breaker panel Busbar Operation Metering Low-voltage
More information3EK7 Distribution Class Surge Arresters. Answers for energy.
3EK7 Distribution Class Surge Arresters Answers for energy. Siemens at Your Service As a global leader of the electronics industries, Siemens has been active in the fields of power transmission and distribution
More informationQ pole Pole Mounted Capacitor System
Q pole Pole Mounted Capacitor System Introduction The ABB Qpole pole mount capacitor system is an economical solution for shunt reactive compensation on overhead distribution networks. The Qpole is suitable
More informationTHP145 HYBRID GAS INSULATED SWITCHGEAR (HGIS) Energy, Fast! tgood.com
THP145 HYBRID GAS INSULATED SWITCHGEAR (HGIS) Energy, Fast! tgood.com TGOOD produces over 5000 switchgear units annually for projects around the globe SOLUTION OVERVIEW For use in affordable air insulated
More informationZinc Oxide Surge Arrester PEXLIM Q
Zinc Oxide Surge Arrester Protection of switchgear, transformers and other equipment in high voltage systems against atmospheric and switching overvoltages. in areas with high lightning intensity and high
More informationEE 741 Over-voltage and Overcurrent. Spring 2014
EE 741 Over-voltage and Overcurrent Protection Spring 2014 Causes of Over-voltages Lightning Capacitor switching Faults (where interruption occurs prior to zero current crossing) Accidental contact with
More informationH U B B ELL L ABOR ATORIES CAPABILITY GUIDE
H U B B ELL L ABO R ATO R I E S CAPABILITY GUIDE INTRODUCTION Hubbell Power Systems, Inc. manufactures a wide variety of products for the electric utility, telecommunications, civil construction, transportation,
More informationS&C Fault Tamer Fuse Limiter. Outdoor Distribution (15 kv through 25 kv)
S&C Fault Tamer Fuse Limiter Outdoor Distribution (5 kv through 25 kv) Introducing S&C s new generation of pole-top transformer protection... Application Although the S&C Fault Tamer Fuse Limiter handles
More information43-SDMS-01 SPECIFICATIONS FOR
SPECIFICATIONS FOR MV SHUNT POWER CAPACITOR BANK UP TO 36 KV This specification is property of SEC and subject to change or modification without any notice CONTENTS Clause Description Page 1.0 SCOPE 3
More informationACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE
ACCESSORIES FOR LPOF, HPPT AND XLPE HIGH VOLTAGE CABLE SYSTEMS PRODUCT CATALOGUE hvgrid-tech designs and manufactures high voltage cable accessories for all types of cable systems, ranging from 69 kv to
More information1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
More informationMedium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Medium Voltage Switch MVS Product Description............................................. 2 Application Description..........................................
More information1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More information3EK7 Distribution Class Surge Arresters. Answers for energy.
3EK7 Distribution Class Surge Arresters Answers for energy. Siemens at Your Service As a global leader of the electronics industries, Siemens has been active in the fields of power transmission and distribution
More informationI Surge Arresters. UltraSIL Polymer-Housed VariSTAR Type U3 Surge Arrester for Systems through 275 kv IEC 10 ka; Line Discharge Class 3 GENERAL
Surge Arresters UltraSIL Polymer-Housed VariSTAR Type U3 Surge Arrester for Systems through 275 kv IEC 10 ka; Line Discharge Class 3 Electrical Apparatus I235-93 GENERAL UltraSIL Polymer-Housed VariSTAR
More informationHigh Voltage Surge Arresters Station Class
Power Transmission and Distribution High Voltage Surge Arresters Station Class Product Overview High Voltage High Protection Just as the Golden Gate Bridge has successfully defied all winds, weather and
More informationOIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) kV to 550kV up to 5000A IEC
OIP Transformer Outdoor Bushings Type COT(C) 125 COT (C) 1800 24kV to 550kV up to 5000A IEC 60137-2008 Features If you need any transformer bushing proven in operation conditions around the world, Trench
More informationPRODUCT CATALOGUE. Overhead System
PRODUCT CATALOGUE Overhead System Information Tel : 03-4777547 Fax : 03-4777570 E-mail : overseas@jaker.com.tw Web : www.jaker.com.tw Add : No.787, Xinwen Rd. Xinwu Dist., Taoyuan City 327, Taiwan Contents
More informationGENERAL INFORMATION POLE MOUNT TRANSFORMER SINGLE PHASE PAD MOUNT TRANSFORMER SINGLE PHASE POLE MOUNT TRANSFORMER THREE PHASE 17
GENERAL INFORMATION SECTION GUIDE SECTION 10 PAGE 1 DESCRIPTION SECTION NUMBER GENERAL INFORMATION... 10 POLE MOUNT TRANSFORMER SINGLE PHASE... 15 PAD MOUNT TRANSFORMER SINGLE PHASE..... 16 POLE MOUNT
More informationHigh Voltage Technology & Testing
The Power of Trust. The Future of Energy. HIGH VOLTAGE TESTING Qualification testing, condition assessment, and forensic analysis Manufacturers and utility users of high-voltage electrical equipment face
More informationSurge arresters for railway applications. Product guide. Siemens HP-AR 41. siemens.com/arresters
Surge arresters for railway applications Product guide HP-AR 41 Siemens 2017 siemens.com/arresters Siemens surge arresters for railway applications reliable, stable and safe over protection electrification.
More informationSurge arresters Product overview
Surge arresters Product overview abb Surge arresters from ABB Switzerland ABB Switzerland Ltd has been developing and manufacturing for over a century, metal-oxide (MO) resistors and MO arresters for worldwide
More informationCobra-S. Catalog Cobra-S
Cobra-S Solid Dielectric, Three Phase Reclosers Providing electronic three phase overcurrent protection for systems rated through 38kV, 800A continuous current, 12.5/16kA symmetrical interrupting Control
More informationBus bar Bushings up to 1.1kV and from 1.6kA to 4kA for Liquid Filled Transformers:
4 (Four) Pole Monoblock: Bus bar Bushings up to 1.1kV and from 1.6kA to 4kA for Liquid Filled Transformers: Designed and manufactured in accordance with EN 50336:2002 and BS 2562: 1979 1 Introduction:
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationCABLE SYSTEMS. Accessories and Systems for Medium and High-Voltage Cables up to 300 kv.
MV-CONNEX, HV-CONNEX, IXOSIL Terminations, IXOSIL MSA Slip-on Joint Boxes CABLE SYSTEMS Accessories and Systems for Medium and High-Voltage Cables up to 300 kv. Welcome to the CABLE SYSTEMS Centre of Competence.
More informationSurge arrester POLIM-H.. ND
DATA SHEET Surge arrester POLIM-H.. ND Technical data Classification according to EN 50526-1 and IEC 62848-1 Nominal discharge current I n (8/20 µs) 10 ka peak Class DC-B High current impulse I hc (4/10
More informationOutdoor Distribution (15 kv through 25 kv) S&C Fault Tamer Fuse Limiter
Outdoor Distribution (5 kv through 25 kv) S&C Fault Tamer Fuse Limiter Introducing S&C s new generation of pole-top transformer protection... Application Although the S&C Fault Tamer Fuse Limiter handles
More informationABB PTTR SPAIN. Zaragoza. The product: Cast coil transformers
ABB PTTR SPAIN Zaragoza. The product: Cast coil transformers ABB BA Transformers - 1-5/7/2007 Dry Type Vacuum Cast Coil Transformer INTRODUCTION ABB BA Transformers - 2 - Product Portfolio II Dry Type
More informationOutdoor live tank SF6 circuit breaker EDT with integrated current transformer up to 72.5 kv
Outdoor live tank SF6 circuit breaker EDT with integrated current transformer up to 72.5 kv SF6 circuit breaker EDT with integrated current transformer ABB is a world leader in live tank circuit breaker
More informationMedium Voltage. Power Factor Correction Reactive Compensation Harmonic Filters. Electrical Power Quality Management at its best.
Medium Voltage Power Factor Correction Reactive Compensation Harmonic Filters POWER QUALITY Electrical Power Quality Management at its best. From electricity generation, transmission, thru its distribution
More informationDistribution transformers Efficiency over life-cycle
Distribution transformers Efficiency over life-cycle ABB a global leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while
More informationPolymer Insulator. ITEM 15kV 25kV 35kV 69kV. Section length(l) 330±15mm 445mm 539mm 888mm. Min. arcing distance 215mm 300mm 340mm 701
Polymer Insulator Characteristics of Polymer Insulator The main element of polymer insulator displays very excellent properties in terms of heatproof performance, chemical stability, electrical insulation,
More informationTransformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC
Transformer High Current Bushings Type CFPT & CFCT 36kV up to 40kA IEC 60137-2008 High current bushings for transformer Features Bushing Type CFPT version Porcelain Insulator Trench RIG technology for
More informationSurge Arrester 3EL2 superior protection up to 550 kv
Certified according to IEC 60099-4 Edition 2.1 (2006) Surge Arrester 3EL2 superior protection up to 550 Light weight. Strong performance. Answers for energy. Simply irresistible. By resisting wear in any
More information3EP6 porcelain surge arrester
www.siemens.com/energy/arrester 3EP6 porcelain surge arrester Safe, reliable, long-lasting, and stable Answers for energy. Compact design high mechanical stability Sealing system Spring Maximum values
More informationMedium Voltage Metal-Enclosed Switches
Medium Voltage Metal-Enclosed Switches Outdoor Medium Voltage Switch.1 Introduction Product Selection Guide....................................2 Medium Voltage Switch MVS Product Description......................................
More informationFEBRUARY 14, 2017 Joslyn Hi-Voltage Capacitor switches customer presentation
FEBRUARY 14, 2017 Joslyn Hi-Voltage Capacitor switches customer presentation agenda Fundamentals Compelling value Product line overview VerSaVac (VSV) Product features and benefits Design Ratings Applications
More informationLOW VOLTAGE CAPACITORS AND CAPACITOR BANKS. Capacitors department
LOW VOLTAGE CAPACITORS AND CAPACITOR BANKS Capacitors department I Selecting the reactive energy compensation system 3 II Selecting the capacitor type 4 III ALPIVAR 6 IV V VI VII VIII SPECIAL RANGES 25
More information34-SDMS-01 SPECIFICATIONS FOR
SPECIFICATIONS FOR M V DROPOUT FUSE CUT OUTS This specification is property of SEC and subject to change or modification without any notice CONTENTS C l a u s e s: Page No. 1- SCOPE 3 2- CROSS REFERENCES
More informationType SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear
Circuit-Breaker www.siemens.com/energy Switchgear Type SIMOPRIME A4, up to 24 kv, Air-Insulated Medium-Voltage Switchgear s Technology Circuit-Breaker Switchgear Type SIMOPRIME, up to 17.5 kv, Air-Insulated
More information3TM Vacuum Contactors
Catalog Extract HG 11.23 Edition 2016 Catalog Extract Medium-Voltage Equipment siemens.com/3tm R-HG11-343.psd 2 Siemens HG 11.23 2016 Contents Medium-Voltage Equipment Catalog Extract HG 11.23 2016 Contents
More informationVoltage limiting device HVL
Datasheet Voltage limiting device HVL 60-0.3 1 2 3 3 Equivalent circuit of voltage limiting device Type HVL 60-0.3 1 MO-surge arrester 2 Trigger electronics 3 Thyristor Product Description The HVL 60-0.3
More informationSeparable Connectors and Kits
Important Notice While Woer has made every effort to ensure the accuracy of the information in this catalog, Woer does not guarantee that it is errorless. Nor does Woer make any other warranty or guarantee
More informationPORCELAIN INSULATORS
Solid Core Station Post Insulator PORCELAIN INSULATORS It is an insulator of generally columnar shape, and it consists of one post insulator unit or an assembly of such units and is intended to give rigid
More informationMetal Clad Air Insulated Switchgear
Metal Clad Air Insulated Switchgear 1/ SecoGear Metal Clad Switchgear Features Fully metal-clad Equipped with Embedded pole VCB Full Front access (can be installed against wall) Perfect interlocking system
More informationVoltage limiting device HVL
Datasheet Voltage limiting device HVL 120-0.3 1 2 3 3 Equivalent circuit of voltage limiting device Type HVL 120-0.3 1 MO-surge arrester 2 Trigger electronics 3 Thyristor Product Description The HVL 120-0.3
More informationSUBSTATION VACUUM CIRCUIT BREAKER (38KV)
SUBSTATION VACUUM CIRCUIT BREAKER (38KV) For more than four decades, Myers Power Products has led the switchgear market in quality for the electric industry, delivering highly reliable products for utilities
More informationwww. ElectricalPartManuals. com CPL Station Arrester Controlled Protective Level Page 1 Indoor-Outdoor Altitude 0-10,000 feet KV
December, 1975 New nformation and Supersedes DB 38-131 Pages 1-4, dated May 1972, and 38-121 D WE A, Pages 1-4, dated April1974 E, D, C/1981/ DB Westinghouse Electric Corporation Distribution Apparatus
More informationSUBSTATION VACUUM CIRCUIT BREAKER (25.8 / 27KV)
SUBSTATION VACUUM CIRCUIT BREAKER (25.8 / 27KV) For more than four decades, Myers Power Products has led the switchgear market in quality for the electric industry, delivering highly reliable products
More informationANSI DESIGN TEST REPORT Report No. EU 1512-HR-00.5 Type PDV 100 Optima Heavy Duty Distribution Class Surge Arrester
ANSI DESIGN TEST REPORT Report No. EU 1512-HR-00.5 Type PDV 100 Optima Heavy Duty Distribution Class Surge Arrester This report records the results of the design tests made on Type PDV 100 Optima Distribution
More informationSF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv
Three Phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDH314 / SDHa314 for 72.5 to 145 kv 06B1-E-0002 Small Space Requirement, High Reliability and Safety ー 72.5 to 145 kv GIS, SDH314/SDHa314
More informationPOLYMER INSULATOR. Index
POLYMER INSULATOR Index INTRODUCTION...2 IEC COMPOSITE INSULATORS...7 ANSI COMPOSITE INSULATORS...14 Introduction General This new generation of Polymer Insulator characterized with: Small Light High mechanical
More informationBOWTHORPE EMP MEH SURGE ARRESTERS (IEC) ENERGY /// MEH SURGE ARRESTERS IEC
BOWTHORPE EMP MEH SURGE ARRESTERS (IEC) GENERIC TECHNICAL DATA Maximum system voltage U m 800 System voltage U s 750 Nominal discharge current ka 20 High current impulse (4/10 µs) ka 100 Arrester class
More informationHigh Voltage Surge Arresters Buyer s Guide Section PEXLIM R
High Voltage Surge Arresters Buyer s Guide Section PEXLIM R Zinc Oxide Surge Arrester PEXLIM R Protection of switchgear, transformers and other equipment in high systems against atmospheric and switching
More informationSUBSTATION VACUUM CIRCUIT BREAKER (15.5KV)
SUBSTATION VACUUM CIRCUIT BREAKER (15.5KV) For more than four decades, Myers Power Products has led the switchgear market in quality for the electric industry, delivering highly reliable products for utilities
More informationPretest Module 29 High Voltage Unit 1
Pretest Module 29 High Voltage Unit 1 1. Is a person qualified to work on high-voltage installations when this module is completed? 2. What is the code definition of high-voltage? 3. What is the IEEE definition
More informationZinc-Oxide Surge Arrester TEXLIM Q-C
Zinc-Oxide Surge Arrester TEXLIM Q-C Protection of switchgear, transformers and other equipment in high systems against atmospheric and switching overs. in areas with very high lightning intensity where
More informationSurge arrester POLIM-C.. HD
DATA SHEET Surge arrester POLIM-C.. HD Technical data Classification according to EN 50526-1 and IEC 62848-1 Nominal discharge current I n (8/20 µs) 10 ka peak Class DC-A High current impulse I hc (4/10
More informationSolid Dielectric, Single Phase Recloser
Solid Dielectric, Single Phase Recloser Catalog O-vsp17 Viper-SP Viper-SP solid dielectric, single phase recloser combines the time-proven reliability of electronically controlled, vacuum fault interrupters
More informationResin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide
1ZSC000563-AAC en, Rev. 2 Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationINTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017
INTERFACE E - 5/8" MEDIUM VOLTAGE SEPARABLE CONNECTORS AND BUSHINGS CATALOGUE 2017 NEXANS NETWORK SOLUTIONS DIV. EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer,
More informationMedium Voltage. KOFD Indoor Type Current Transformers Cast Resin Insulated. Catalogue. 12, 13.8, 17.5, 24 and 36 kv KOFD 1 GB
Catalogue Indoor Current Transformers Cast Resin Insulated 1, 13.8, 17.5, 4 and 36 kv 97-1 96-1054 Medium Voltage 1 Indoor Current Transformers Cast Resin Insulated 1, 13.8, 17.5, 4 and 36 kv Index Description...
More informationSF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS)
SF6 GAS INSULATED METAL ENCLOSED SWITCHGEAR (GIS) About company The «Elektroapparat» plant starts its operation in 1922 as a plant manufacturing high-voltage electrical equipment. During the first two
More informationSurge Arresters. UltraSIL Polymer-Housed VariSTAR Surge Arresters: Normal-Duty (5 ka), Heavy-Duty (10 ka), and Heavy-Duty Riser Pole (10 ka)
Surge s UltraSIL Polymer-Housed VariSTAR Surge s: Normal-Duty (5 ka), Heavy-Duty (10 ka), and Heavy-Duty Riser Pole (10 ka) Electrical Apparatus 235-35 General Cooper Power Systems has set the standard
More information