art. 499 art. 502 art. 503 Quick closing cap with toungues for loading mouths Features Complete of fuel resistent gasket

Transcription

1 art. 499 Quick closing cap with toungues for loading mouths Aluminium made DN 3" art. 502 Complete of fuel resistent gasket Quick closing cap with handle for loading mouths Brass DN 2" Brass DN 3" Brass DN 4" Aluminium DN 3" Aluminium DN 4" art. 503 Complete of fuel resistant gasket Quick connection threaded nut ring Brass DN 1 1/2" x 1 1/2" Brass DN 2" x 2" Brass DN 2" x 1 1/2" Brass DN 3" x 2 1/2" Brass DN 3" x 3" Brass DN 4" x 4" Brass, Cassoni threaded DN 4"x 4" Italian Ministry of Female BSP threaded, quick male connection Page 1

2 art. 511 API RP 1004 Male adaptor for bottom loading Aluminium DN 4" art. 512 Body in light aluminium alloy, Viton seals. Suitable for coupling during fuel loading and unloading operations. Total flow in both directions. API RP 1004 Male adaptor with handle for bottom loading N Aluminium DN 4" art. 516 Body in light aluminium alloy, Viton seals. Suitable for coupling during fuel loading and unloading operations. Total flow in both directions. 4" TTMA flanged connections. Complete of handle for manual opening and closing and sight glass Fitting for male adptors 0511 and " RP1004 X 3" BSP threaded " RP1004 X 3" quick coupling " RP1004 X 4" BSP threaded " RP1004 X 4" quick coupling " RP1004 X 3" camlock " RP1004 X 4" camlock Pipe fitting for connecting the 511 and 512 male adaptors to the discharge hose of the tank-truck Page 2

3 art. 517 Sight Glass Aluminium DN 4" TTMA H Aluminium DN 4" TTMA H. 120 art. 519 It allows to verify the complete discharge of the tank-truck section Safety Pneumatic Interlock Aluminium and Brass Pneumatic security sistem to be connected to tank-truck braking device. During the loading process, when the male is in used, it impedes an erroneous movement of the tanktruck art. 520 Dust Cup Rubber suitable for Hydrocarbons It protects the male from accidental impacts maintaing its surface clean and collecting the eventual minimal losses. Page 3

4 art. 608 Pneumatic interlock valve for "closed cycle" Aluminium and Brass DN 3" Patented by Silea art. 610 To be installed on the tank-truck's vapours recovery pipeline. It automatically impedes the discharge of the product and the vapours release in case that vapours recovery hose equipped with art. 610 has not been connected. Our quick coupling 610 opens the foot valve and activates the pneumatic circuiting allowing the unloading operations. Disconnecting the flexible hose equipped with art. 610, the 608 valve automatically shuts off the pneumatic circuit hindering the discharge of the product. Quick spanner for interlock opening with rubber holder DN 2 " x DN 2 " x DN 3 " x DN 3 " x DN 3 " x DN 2 " Patented by Silea art. 611 It goes along with the flexible hose. It permits the opening of our article 0608 (on trucks) and the opening and closing of article 0682 (vapour by-pass relief valve, patented by Silea). Double quick connection for the interlock valve Brass DN 2" x 2" To be used to elangate the flexible hoses fited with art.610 Page 4

5 art. 613 Quick spanner reduction for interlock opening DN 2" x 1 1/2" DN 2" x 1 1/2" DN 3" x 3" It permits the opening of article 0682 (vapour by-pass relief Valve, patented by SILEA), if there are flexible hoses having the quick coupling device not incorporating our article 610. Quick fitting art Brass DN 2" x 1 1/2" art. 629 It allows the connection between the flexible hoses fitted with our article 0610 and the closed cicle with a 1 1/2 threadaed pin (art.0601) Conic filter for loading pipe Brass DN 2" for high flow del. nozzles Brass DN 4" for loading pipe Brass net Page 5

6 art ways Valve Aluminium DN 3" Utilised for loading and unloading operations, complete of flow regulating by-pass. It allows to simplify the tank-truck devices by eliminating the need of several gate valves, with the further advantage of controlling the flow rate up to 0 (zero) by means of its by-pass. art. 686 Adaptors with filters DN 3" Aluminium DN 2 ½" Blackmer /Sampi Mouvex DN 3" Blackmer / Sampi Mouvex To be used with l'art On request, it can be supplied with connections suitable for other pump brands art. 687 Elbow valve Aluminium DN 3" To be used with l'art. 0685, when there is the need to suck the liquid without utilizing the meter. Page 6

7 art ways valve complete of elbow valve Aluminium DN 3" Consisting of 5-way valve 685 and elbow valve 687 art ways Group DN 3" DN 3" Corken Blackmer / Sampi Mouvex Consisting of : - 5-ways valve adaptor with filter elbow valve 687 art ways Group complete of pump Aluminium DN 3" Consisting of : - 5-ways valve adaptor with filter elbow valve coupling elbow - 3" pump Page 7

8 art. 701 Flexible hose fitting Brass DN 2" x DN 3" x DN 3" x DN 3" x DN 4" x DN 4" x 100 art. 703 Brass made. Anti fuel rubber gasket. Double quick coupling fitting Brass DN 3" x 3" Brass DN 4" x 4" Fitting for the elongation of hoses fitted with our article 0701 art. 706 Hose holder fitting with rotating ring Brass DN 1 1/2" x Brass DN 2" x Brass DN 2 1/2" x Brass DN 2 1/2" x Brass DN 3" x Brass DN 4" x Brass DN 4" cassoni-type x 100 Brass made. Anti-fuel rubber gasket. BSP female thread Page 8

9 art. 707 BSP Threaded hose holder fitting Brass DN 1 1/2" x Brass DN 2" x Brass DN 2 1/2" x Brass DN 2 1/2" x Brass DN 3" x Brass DN 4" x 100 Body in brass. BSP male threaded connection art. 754 Reduction Brass DN 4" x 3" Brass DN 4" cassoni x 3" Reduction from BSP female thread to quick male coupling art. 759 Quick connection reduction Brass DN 4" x 3" Reduction with handle for quick female coupling to quick male coupling Page 9

10 art. 810 Water presence indicator Aluminium 1 1/2" BSP thread. Made in aluminium and pirex. Length: 100. It allows the elimination of water that may be found in the diesel-oil. art. 829 High flow delivery nozzle Aluminium DN 1½"without anti-drop valve Aluminium DN 2" without anti-drop valve Aluminium DN 1 ½" with anti-drop valve Aluminium DN 2" with anti-drop valve Handle with three fixed positions openning lever. Double piston valve with progressive opening and closing without hammer blow. 90 unloading spout art. 831 High flow delivery nozzle Aluminium DN 1½" without anti-drop valve Aluminium DN 2" without anti-drop valve Aluminium DN 1½" with anti-drop valve Aluminium DN 2" with anti-drop valve Aluminium DN 1½" Handle with three fixed positions openning lever. Double piston valve with progressive opening and closing without hammer blow. 50 unloading spout Page 10

11 art. 832 Vacuum breaker DN 3/8" gas For high flow delivery nozzle art art. 833 Swivel bushing DN 1 1/ 2" x 2" gas DN 2" x 2 1/2" gas For high flow delivery nozzle art art. 834 Swivel hose holder DN 2" PIPE 38 x 53 For jet refuelling nozzles Page 11

12 art. 835 Swivel bushing DN 1 1/2" x 1 1/2" Brass made art. 838 Ground Wire assembly mt 2.5 Stainless steel made, copper eyelet art. 840 Special spout for jet refuelling DN 2" x 40 Special spout for jet refuelling nozzles on art Page 12

13 art. 841 Anti-drop cap for je refuelling nozzles DN 1 1/2" Made of plastic material and steel cable. It avoids the product dripping. art. 897 Crown gear for hose reel Z 90 Complete of Kit for reels art art. 899 Fuel hose reel N Dm wheel D 600; Drum D 300 x 600 Max flexible hose length D. 60 x 20 mt N Dm wheel D 700; drum D 300 x 600 Max flexible hose length D. 60 x 35 mt N Dm wheel D 800; drum D 300 x 600 Max flexible hose length D. 60 x 55 mt Nodular cast iron main body with carbon steel containment elements. Rotational movements on a double round of ball and on an oscillating bearing. Double sight glass. Viton O ring seal. Flanged inlet connection in size 2 ½ either inclinable towards the top or the bottom. Outlet connection for flexible hose available in 2 female BSP threaded an 2 ½ male threaded. Page 13

14 art. 901 Fuel hose reel N Dm wheel D -1000; drum D 300 x 180 Max flexible hose length D. 60 X 28 mt N Dm wheel D -1200; drum D 300 x 180 Max flexible hose length D. 60 X 45 mt N Dm wheel D -1400; drum D 300 x 180 Max flexible hose length D. 60 X 60 mt N Dm wheel D -1000; drum D 300 x 240 Max flexible hose length D. 60 X 28 mt N Dm wheel D -1200; drum D 300 x 240 Max flexible hose length D. 60 X 45 mt N Dm wheel D -1400; drum D 300 x 240 Max flexible hose length D. 60 X 60 mt Nodular cast iron main body with carbon steel containment elements. Rotational movements on a double round of ball and on an oscillating bearing. Double sight glass. Viton O ring seal. Flanged inlet connection in size 2 ½ either inclinable towards the top or the bottom. Outlet connection for flexible hose available in 2 female BSP threaded an 2 ½ male threaded. art.902 Unidirectional anti-drop valve Aluminium DN 2" x 2 1/2" Female-female BSP threaded connections to be applied on the flexible hoses for the unloading with flow-metres. Page 14

15 art Steel flanged pipe section Steel DN 2" Steel DN 2 1/2" Steel DN 3" For sliding flanges art Square flange DN 2" DN 2 1/2" DN 3" Carbon steel made. For tank-truck equipment art Square gasket DN 2" DN 2 1/2" DN 3" Synthetic rubber made Page 15

16 art Flow indicator Steel Steel body and Pyrex cap. It allows the detection of the liquid inside the pipes. art Flexible hose sliding support With sliding reels in high resistant plastic material. It facilitates the rolling down and the retracting of the flexible hoses mounted on the reels. art.2408 Electropneumatic motorization for hose reels Volt Volt 0,6 hp direct current engine. It allows the retracting of the flexible hose on the reel. Page 16

17 art Pneumatic motorization for hose reels Volt Volt / Volt adpe Complete of control board and 0,6 hp direct current engine. It allows the retracting of the flexible hose on the reel. art Electropneumatic motorization control board High resistant plastic material art Chain tightener slide for motorization Galvanised iron made art Chain DN 1 1/2" x 5/16 ISO neutre reels chain Page 17

18 ISO neutre reels chain art Chain joimt DN 1/2" x5/16 Element for the chain set up art False link DN 1/2" x5/16 Element for installing and dismantling of the chain. Silea S.r.l., established in 1968 after more than 30 years of steady and continual growth, can today rely upon two factory sites both based in Ozzano dell'emilia - in the industrial outskirts of Bologna, Italy - and is recognised as a pre-eminent European manufacturer of components and equipment dedicated to the petrochemical industry. Silea S.r.l, quality certified ISO 9001 since includes in its wide range of products, (amongst others) the following: - Pipe fittings and safety components, - Equipment for fuels, LPG gas and industrial liquids, - Equipment for the chemical and food industry, - Equipment for road and rail truck tankers, - Loading arms, API couplers and safety systems for vapour recovery. Many of Silea's products and components are patented and provided with the necessary government approvals. Silea S.r.l. can also place a customer's disposal a skilled technical department, which is able to solve any needs related to plant, logistics and liquid product handling. The company is a member of the UNI Group, and is proud of being listed in the select register of official suppliers to the Italian Military Forces. Silea is an active member of many major trade associations, including the Petroleum Equipment Institute (PEI) and the Institute of Petroleum (IP). Detailed catalogues and brochures of our production are available from the sales office. Should you need further elucidations, do not hesitate to contact us. Page 18