Flex Strip. Features & Benefits

Transcription

1 Features & Benefits High quality, high specification High lumen efficiency High brightness Ease of installation Flexible, easily bent Easily cut to length every 1m (220V) or 5cm (12V) Dimmable (5V, 12V & 24V) Quick, easy installation Quality guaranteed with warranty Available in IP20, IP67 & IP68 Single colour, analogue and digital RGB Ideal for Signage Box lighting Recessed lighting Under-cabinet lighting Architectural & interior outlines

2 Product matrix LED LED / M LM/M CUT HRS / DAY V MAX W/M COLOURS IP DIM CM 12 12V 12 CW WW NW R G B Y O 20, 67, CM 24 12V 4.8 CW WW NW R G B Y O 20, 67, CM 24 12V 12 CW WW NW R G B Y O 20, 67, CM 12 12V 14.4 ANALOGUE RGB 20, 67, CM 12 12V 14.4 DIGITAL RGB WS , 67, CM 12 5V 18 DIGITAL RGB WS2812B 20, 67, M V 12 CW WW NW R G B Y O M V 14.4 CW WW NW R G B Y O V flexible strip can be dimmed with an appropriate 220V dimming controller Customised strips available with MOQ (usually 100m) Reduced brightness Reduced power Chip count per meter 5V, 12V, 24V, 220V Thicker 3oz FPC FPC width Higher warranty End connectors Packaging : 5-50m reel LED package LED chip brand CCT / wavelength S-strip FPC Constant current strips We do not offer IP65 (glue dripping) strips as they discolour and crack over time

3 Technical Specifications LED CHIPSET LED COUNT RUNNING LENGTH LUMEN MAINTENANCE INPUT VOLTAGE INTERNAL OPERATING VOLTAGE POWER CONSUMPTION CUTTING LENGTH FPC OPERATING TEMPERATURE WARRANTY EPISTAR 2835 SMD LED CHIP (SINGLE COLOUR) EPISTAR 5050 SMD LED CHIP (RGB) 60 LEDS PER METER SINGLE FEED: 100M (220V) 20M (24V) 10M (12V) DUAL FEED: 20M (12V) 40M (24V) 70% OF ORIGINAL BRIGHTNESS AT 50,000 HOURS 220V AC WITH POWER CONVERTER 5V, 12V & 24V DC WITH CONSTANT VOLTAGE DRIVER 220V DC 24V DC 12V DC 5V DC 12W PER METER (SINGLE COLOUR) 14.4W PER METER (RGB) 1 METER (220V) 10CM (24V) 5CM (12V) 2OZ COPPER DOUBLE LAYER 8MM (SINGLE COLOUR) 10MM (RGB) -20 TO 60 CELSIUS 2 YEARS CERTIFICATION IP RATING CRI FLUX VIEWING ANGLE 120 CE, ROHS COMPLIANT IP67 HOLLOW SILICONE SLEEVE IP68 SOLID SILICONE SLEEVE IP20 NO SLEEVE 90RA (COLD WHITE) 80RA (NATURAL WHITE, WARM WHITE) 22-24LM PER CHIP (2835) 1320LM 1440LM PER METER 220V Flexible Strips must be installed with an online UPS

4 Installation IT IS RECOMMENDED THAT THIS PRODUCT BE INSTALLED BY A QUALIFIED ELECTRICIAN CUTTING THE FLEXIBLE STRIP TO SIZE MEASURE THE EXACT LENGTH OF LUMUL LED FLEXIBLE STRIP THAT YOU REQUIRE. LUMUL LED FLEXIBLE STRIPS CAN BE SAFELY CUT TO SIZE WITH SHARP SCISSORS ON DEMARCATED CUTTING LINES. YOU CAN EASILY CUT THROUGH THE OUTER SILICONE SLEEVE AS WELL AS THE FLEXIBLE STRIP IN ONE CUT. CUT ONLY ON THE CUTTING MARK, LEAVING COPPER CONNECTORS EXPOSED ON BOTH SIDES OF THE CUT. IF YOU ARE CONNECTING TWO IP67 STRIPS, CUT THE SILICON SLEEVE BACK ABOUT 2MM ON ONE OF THE STRIPS BEING JOINED, BEING CAREFUL NOT TO CUT OR DAMAGE THE INTERNAL STRIP. SOLDERING WIRES ONTO THE STRIP COPPER CONNECTORS THE END OF THE STRIP CONTAINS TWO SMALL ELONGATED COPPER CONNECTORS WHICH ARE EASY TO SOLDER ON TO. PRE-TIN THE CONNECTORS AND WIRE ENDS INDIVIDUALLY USING A HOT SOLDERING IRON AND SOLDER. RUN THE WIRES THROUGH SMALL HOLES IN THE END CAP. SOLDER THE WIRES ONTO THE TINNED CONNECTORS, ENSURING THEY ARE FIRMLY SOLDERED. DO NOT APPLY THE SOLDERING IRON TO THE FLEXIBLE STRIP FOR TOO LONG OTHERWISE YOU RISK DAMAGING THE COMPONENTS. SOLDERING TWO STRIPS TOGETHER THE END OF THE STRIP CONTAINS TWO SMALL ELONGATED COPPER CONNECTORS WHICH ARE EASY TO SOLDER ON TO. PRE-TIN THE CONNECTORS ON BOTH STRIP ENDS USING A HOT SOLDERING IRON AND SOLDER. PLACE A CLEAR ½ HEAT SHRINK SLEEVE OVER THE ONE STRIP SILICONE SLEEVE PUSHING IT AWAY FROM THE AREA OF WORK AND HEAT. PLACE THE TWO STRIPS TOGETHER, ONE OVERLAPPING THE OTHER SLIGHTLY WITH THE COPPER CONNECTORS PERFECTLY IN LINE. PULL THE HEAT SHRINK OVER THE JOINED AREA AND HEAT EVENLY WITH A HEAT GUN. SEALING THE END OF THE FLEXIBLE STRIP THE IP67 STRIP IS ENCLOSED WITHIN A WATERPROOF SILICONE SLEEVE. IF THE STRIP IS TO BE USED OUTDOORS OR IN A WET ENVIRONMENT IT IS IMPERATIVE TO PROPERLY SEAL THE END OF THE STRIP IF YOU HAVE CUT THE STRIP TO SIZE. LIBERALLY SPREAD A 1CM RIDGE OF SILICONE GLUE AROUND THE OUTER PART OF THE END OF THE SILICONE SLEEVE. FIT A SILICONE CAP ONTO THE GLUED STRIP END, CAREFULLY PULLING THE WIRES TIGHT, APPLY FURTHER SILICONE GLUE AROUND THE HOLES WHERE THE WIRES ARE PROTRUDING. ALLOW TIME TO DRY PROPERLY. APPLY FURTHER SILICONE GLUE AROUND THE JOINT TO ENSURE ALL PORTIONS ARE COVERED AND WATERPROOFED. ENSURE ALL EXPOSED WIRE CONNECTIONS ARE PROTECTED FROM WATER AND THE ELEMENTS USING APPROPRIATE WATERPROOF CONNECTORS, ALTERNATIVELY USE SILICONE GLUE AND A HEAT SHRINK SLEEVE.

5 Installation MOUNTING THE FLEXIBLE STRIP LUMUL LED FLEXIBLE STRIP IS IDEALLY MOUNTED USING LUMUL SILICONE MOUNTING BRACKETS AND STAINLESS SCREWS. MAXIMUM STRIP LENGTHS DO NOT EXCEED THE MAXIMUM STRIP LENGTH DUE TO VOLTAGE DROP WHICH WOULD RESULT IN DIMMER LEDS. MAXIMUM 10M OF 12V FLEXIBLE STRIP IN SERIES WHEN POWERED FROM ONE END & 20M WHEN POWERED FROM BOTH ENDS. POWER SUPPLY WHILST MANY LED PRODUCTS CLAIM TO HAVE LIFESPANS OVER 30,000 TO 50,000 HOURS IT IS USUALLY THE POWER SUPPLY WHICH WILL FAIL SOONER, THEREFOR IF YOU WANT A RELIABLE INSTALLATION TO LAST YEARS, ENSURE YOU PURCHASE A GOOD QUALITY POWER SUPPLY SUCH AS THE LUMUL RANGE OF POWER SUPPLIES. YOUR FLEXIBLE STRIP REQUIRES A 12V CONSTANT VOLTAGE POWER SUPPLY, UNLESS YOU HAVE SPECIFICALLY PURCHASED A CUSTOMISED 5V OR 24V FLEXIBLE STRIP. IT IS IMPERATIVE TO ENSURE THAT YOU UTILISE A CORRECTLY SIZED POWER SUPPLY FOR YOUR 12V STRIP. AN UNDER-SIZED POWER SUPPLY WILL LIKELY EXPERIENCE PREMATURE FAILURE. TO EXTEND THE LIFESPAN OF YOUR POWER SUPPLY, DO NOT CONSUME MORE THAN 80% OF THE MAXIMUM POWER RATING OF THE POWER SUPPLY. DIMMING LUMUL 5V, 12V AND 24V LED FLEXIBLE STRIPS CAN BE DIMMED WITHOUT FLICKER. UTILISE A DIMMABLE POWER SUPPLY OR INSTALL A STAND-ALONE DIMMING CONTROLLER. ENSURE YOUR DIMMING CONTROL UNIT IS COMPATIBLE WITH YOUR DIMMING DRIVER OR DIMMING CONTROLLER. USAGE (HOURS PER DAY) THE STANDARD LUMUL HIGH-BRIGHTNESS LED FLEXIBLE STRIPS ARE DESIGNED TO BE LIT NO MORE THAN 12 HOURS PER DAY IN ORDER TO MAINTAIN 70% OF THEIR ORIGINAL BRIGHTNESS AFTER 50,000 HOURS. LUMUL OFFERS AN APPROPRIATE FLEXIBLE STRIP FOR 24 HOURS USE. WE RECOMMEND INSTALLING A TIMER DEVICE (EXAMPLE A DAY-NIGHT SWITCH) TO LIMIT USAGE.

6 Power Supply Selection 12V single colour LUMUL 12V Flexible Strip requires a 12V constant voltage power supply. Ensure the power supply is sized correctly to avoid damaging the power supply or Flexible Strip. LUMUL Flexible Strip is polarity sensitive. Always ensure the positive and negative wires on the Neon Flex are connected to the positive and negative terminals of the power supply. Size the power supply at least 20% larger than required so as never to overwork the power supply. Each meter of LUMUL Single Colour Flexible Strip draws 12 Watts of power. To calculate the minimum wattage of power supply for LUMUL 12V Single Colour Flexible Strip: Minimum power supply wattage = (Flexible strip meters) * 15 m Min Driver Non-PFC IP65 / IP67 Mean Well Available in dimmable and non-dimmable 1 15W LRS-25-12, RSP HLG-80H-12, ELG W LRS RSP HLG-80H-12, ELG W LRS RSP HLG-80H-12, ELG W LRS RSP HLG-80H-12, ELG W LRS RSP HLG-120H-12, ELG W LRS RSP HLG-120H-12, ELG W LRS RSP HLG-120H-12, ELG W LRS RSP HLG-150H-12, ELG W LRS RSP HLG-150H-12, ELG W LRS RSP HLG-185H-12, ELG W LRS RSP HLG-185H-12, ELG W LRS RSP HLG-185H-12, ELG W LRS RSP HLG-240H-12, ELG W LRS RSP HLG-240H W LRS RSP HLG-240H-12

7 Power Supply Selection RGB LUMUL 12V Flexible Strip requires a 12V constant voltage power supply. Ensure the power supply is sized correctly to avoid damaging the power supply or Flexible Strip. LUMUL Flexible Strip is polarity sensitive. Always ensure the positive and negative wires on the Neon Flex are connected to the positive and negative terminals of the power supply. Size the power supply at least 20% larger than required so as never to overwork the power supply. Each meter of LUMUL RGB Flexible Strip draws 14.4 Watts of power. To calculate the minimum wattage of power supply for LUMUL RGB Single Colour Flexible Strip: Minimum power supply wattage = (Flexible strip meters) * 18 m Min Driver Non-PFC IP65 / IP67 Mean Well Available in dimmable and non-dimmable 1 18W LRS-25-12, RSP HLG-80H-12, ELG W LRS RSP HLG-80H-12, ELG W LRS RSP HLG-80H-12, ELG W LRS RSP HLG-80H-12, ELG W LRS RSP HLG-120H-12, ELG W LRS RSP HLG-120H-12, ELG W LRS RSP HLG-150H-12, ELG W LRS RSP HLG-150H-12, ELG W LRS RSP HLG-185H-12, ELG W LRS RSP HLG-185H-12, ELG W LRS RSP HLG-240H-12, ELG W LRS RSP HLG-240H W LRS RSP HLG-240H W LRS RSP W LRS RSP