High Pressure Ball Valves. Ball Valves

Transcription

1 High Pressure 79

2 Valve Options Reliable, simple, operation for onoff service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum turbulence and pressure drop Positive leak tight shut off, even with fluctuating pressures. Panel mounting capabilities standard BiDirectional Flow Handle direction indicates position of valve and flow direction Micro finished ball provides positive seal Free floating ball design compensates for seat wear Available in CBCLok, CSLok, or Tylok Standard Fittings and NPT pipe end connections Specifications Pressure Rating Stainless Steel Brass TFE KELF TFE KELF 500 psig (03 bar) 5000 psig (344 bar) 500 psig (03 bar) 3000 psig (206 bar) Temperature Rating 0 to 400 0F (8 to 204 0C) 300 to 300 0F (48 to 49 0C) 0 to 400 0F (8 to 204 0C) 300 to 300 0F (48 to 49 0C) * For tubing and pipe working pressures see CBCLok / CSLok section. # Components Handle Screw Gland Nut Stem Washer Stem Stem Backup Ring Stem ORing Panel Lock Nut Body Ball Seat End Connector ORing End Connector Stainless Brass Steel Nylon with Brass Insert Stainless Steel 36 SS Brass Nylat 36 Stainless Steel TFE Fluorocarbon FKM 36 SS Brass 36 SS Brass 36 Stainless Steel TFE, KELFF Fluorocarbon FKM 36 SS Brass 80

3 High Pressure Part Number Shown: SS6DTT66K CBCLok double ferrule tube ends are completely interchangeable with Swagelok & Parker ALok tube ends. CSLok single ferrule tube ends are completely interchangeable with Parker CPI tube ends. Valve Dimension Chart SERIES 4 SERIES 6 SERIES 8 Basic Part Number 4DTT22* 4STT22* 4DTT44 4STT44 4FF22 4FF44 4MM22 4MM44 6DTT44* 6STT44* 6DTT66 6STT66 6DTT88 6STT88 6FF44 6FF66 6FF88 6MM44 6MM66 6MM88 8DTT66* 8STT66* 8DTT88 8STT88 8DTT22 8STT22 8FF66 8FF88 8FF22 8MM66 8MM88 Connection Orifice Dimensions (Inches) Port A Port B Inch (mm) A B C D E F G H Panel Hole Panel Nut Hex /8" CBCLok /8" CSLok /4" CBCLok /4" CSLok /8" /4" /8" /4" /4" CBCLok /4" CSLok 3/8" CBCLok 3/8" CSLok /2" CBCLok /2" CSLok /4" 3/8" /2" /4" 3/8" /2" 3/8" CBCLok 3/8" CSLok /2" CBCLok /2" CSLok 3/4" CBCLok 3/4" CSLok 3/8" /2" 3/4" 3/8" /2" 0.88 (4.8) (6.4) (9.5) * Reduced Port / / / /8 7/8 /6 8

4 HP Series Ball Valve are ordered as listed in this catalog by inserting the material code before the part number. HP Series Valves can be identified through the part number as to material, valve series, style, valve configurations, port size, and seat material. The part number describes a complete ball valve assembly. Special Configurations available upon request. Example: A 5000 psi Stainless Steel ball valve, orifice, with a /2 female NPT end connection for outlet A and a 3/8 CBCLok end connection for outlet B and PCTFE seats, is designed as follows. SS 8 D FT 8 6 K Material Valve Series Style Port A / Port B Port A / Port B Size Chart Chart 2 Chart 3 Chart 4 Chart 5 Seat Chart 6 Chart Material Chart 2 Valve Series Chart 3 Style B SS Brass Stainless Steel " Orifice 0.250" Orifice 0.375" Orifice D S CBCLok CSLok Tylok Standard Chart 4 Valve Configuration Type Port A Port B TT MM* FF* MF* FM* TM MT TF FT Chart 5 Port Size Designator OD (Inches) Pipe Thread (NPT) TT MM* FF* MF* FM* See dimension chart for available sizes. Chart 6 Seat T PTFE (Teflon) K KELF * Use Style from Chart 3 for this type of configuration. Example: B4DTT44T Designates a 500 psi brass ball valve,, 0.88" orifice with /4" CBCLok end connections and PTFE seats. Example: SS6FF64K Designates a 5000 psi stainless steel ball valve,, 0.250" orifice with a 3/8" end connections for port A and a /4" female NPT end connection for port B and PCTFE seats. 82

5 High Pressure Handles & Locking Device Assembled standard with black handle. For other colors add the designator as a suffix to the order number. Handle Color Black Red Blue Designator BK RD BL Green Orange Yellow GN OG YW Tylok is proud to announce a newlyredesigned handle and locking device for our HP Series. The handle comes in various colors: black, red, blue, green, orange, and yellow. These color choices will make it easy to identify different process lines and can help customers who want their valves handles to conform to ASME A3., Scheme for the Identification of Piping Systems. Our new lockout device is designed specifically to work with the new handles, and allows the valve to be locked in fully open or fully closed positions. LockOut Device A Lockout device allows the user to lock the valve in either the fully opened or fully closed position. Lockout devices are available factory installed only. Add the suffix LD to the ordering number Example: SS6DTT66KLD For example, a /2 stainless steel valve with /2 CBCLok Ends, a PCTFE seat, lock out valve, and a green handle would have the part number: SS8DTT88KLDGR To order an handle for field assembly, use the following part numbers: Series 4 & 6 Series 8 NYHPBV46BK NYHPBV8BK NYHPBV46RD NYHPBV46BL NYHPBV46GN NYHPBV46OG NYHPBV46YW NYHPBV8RD NYHPBV8BL NYHPBV8GN NYHPBV8OG NYHPBV8YW 83

6 & 6 Series 8 Series Kit Number Description Handle KIT46BK* KIT8BK* KIT46HPBVLD KIT8HPBVLD KIT46HPBVLDH** KIT8HPBVLDH** 4/6 Series Ball Valve Black Handle Kit 8 Series Ball Valve Black Handle Kit 4/6 Series Locking Device 8 Series Locking Device 4/6 Series Ball Valve Black Handle Kit with Locking Device 8 Series Ball Valve Black Handle Kit with Locking Device 6BV6BK 8BV6BK 6BV6BK 8BV6BK Set Screw BV6B BV6B BV6B BV6B Locking Bracket SS6BV7 SS6BV7 SS6BV7 SS6BV7 * "BK" designates black colored handle, other color handles are available and should be verified against part number. ** By default "LDH" kits contain black handles, however other color handles are available and should be verified against part number. 84