ZCK-Y39 ZCK-Y49 ZCK-Y33 ZCK-Y34 ZCK-Y31 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-M2H29 ZCK-M2H29

Transcription

1 ZCK-Y39 ZCK-Y43 ZCK-Y49 ZCK-Y41 ZCK-D239 ZCK-D23 ZCK-D59 ZCK-Y55 ZCK-Y54 ZCK-Y59 ZCK-D219 ZCK-D21 ZCK-D81 ZCK-D91 ZCK-Y91 ZCK-Y31 ZCK-Y33 ZCK-Y34 ZCK-Y81 ZCK-D029 ZCK-D02 ZCK-D05 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-D08 ZCK-D10 ZCK-D17 ZCK-D16 ZCK-D15 1 AB1-R11 6 ZCK-M1H29, ZCK-M1,M5,M6,M7,M9H29 M5H29, M6H29, M7H29, M9H29 ZCK-M8H29 ZCK-M8 34 Te Plunger head Rotary head Multi-directional head Positive opening operation

2 References Body/contact assemblies for plunger or rotary head Contact block Scheme Positive Reference Weight operation (1) kg For limit switches type XCK-M 2-pole 1 N/C + 1 N/O ZCK-M1H (XES-P2151) ZCK-MiH29 2-pole 1 N/C + 1 N/O ZCK-M5H break before make (XEN-P2151) 2-pole 1 N/O + 1 N/C ZCK-M6H make before break (XEN-P2161) 2-pole 1 N/C + 1 N/C ZCK-M7H (XEN-P21) 2-pole 1 N/O + 1 N/O ZCK-M8H (XEN-P21) pole 1 N/C + 1 N/C ZCK-M9H (XES-P21) For limit switches type XCK-M with mechanical contact state indicator 2-pole 1 N/C + 1 N/O (XES-P2151) (1) : N/C contact with positive opening operation. Te 35

3 References ZCK-D10 ZCK-D02 ZCK-D2i ZCK-D41 ZCK-D109 ZCK-D029 ZCK-D1i ZCK-D59 Plunger heads Type of operator Max. actuation Positive Reference Weight speed operation (1) kg For actuation on end End plunger standard 0.5 m/s ZCK-D steel with protective boot 0.5 m/s ZCK-D For actuation by cam Roller plunger standard 0.5 m/s ZCK-D steel with protective boot 0.5 m/s ZCK-D Roller lever plunger standard 1.5 m/s ZCK-D thermoplastic (1 dir. of actuation) with protective boot 1.5 m/s ZCK-D Roller lever plunger standard 1.5 m/s ZCK-D steel (1 dir. of actuation) with protective boot 1.5 m/s ZCK-D Rotary heads (with operating lever) Type of operator Max. actuation Positive Reference Weight speed operation (1) kg For actuation by cam Roller lever thermoplastic 1.5 m/s ZCK-D (2) steel 1.5 m/s ZCK-D steel, ball bearing mounted 1.5 m/s ZCK-D Variable length thermoplastic 1.5 m/s ZCK-D roller lever (2) For actuation by any moving part Rod lever thermoplastic 1 m/s ZCK-D Ø 6 mm, L = 20 (3) Spring lever (2) 1 m/s ZCK-D Spring metal rod lever (2) 1 m/s ZCK-D ZCK-D81 ZCK-D06 ZCK-D05 ZCK-D08 Rotary head (without operating lever) Type Positive Reference Weight operation (1) kg For actuation ZCK-D from left and right OR from left or right (see page 10) Multi-directional heads Type of operator Max. actuation Positive Reference Weight speed operation (1) kg For actuation by any moving part Cat s whisker 1 m/s ZCK-D in any direction Spring rod lever 0.5 m/s ZCK-D in any direction (1) : Operating head able to guarantee positive opening operation. (2) Adjustable throughout 360 in 5 steps, or in 90 steps by reversing the notched washer. (3) Adjustable throughout 360 in 5 steps, or in 45 steps by reversing the lever mounting. 36 Te

4 References Operating levers for rotary heads Description Positive Reference Weight operation (1) kg For actuation by cam ZCK-Y1i ZCK-Y3i ZCK-Y39 Roller lever (2) thermoplastic ZCK-Y for heads ZCK-D1i steel ZCK-Y steel, ball bearing mounted ZCK-Y Roller lever (2) thermoplastic ZCK-Y for head ZCK-D05 steel ZCK-Y steel, ball bearing mounted ZCK-Y elastomer Ø 5 roller ZCK-Y Variable length thermoplastic ZCK-Y roller lever (2) steel ZCK-Y elastomer Ø 5 roller ZCK-Y ZCK-Y41 ZCK-Y43 ZCK-Y49 For actuation by any moving part Square rod (2) u 3 mm steel, L = 125 mm ZCK-Y Round rod Ø 3 mm glass fibre, L = 125 mm (2) ZCK-Y Ø 6 mm thermoplastic, L = 20 (3) ZCK-Y Spring lever (2) ZCK-Y Spring metal rod lever (2) ZCK-Y Contact blocks ZCK-Y54 ZCK-Y55 ZCK-Y59 Type of contact Scheme For body Positive Reference Weight type operation (1) kg 2-pole 1 N/C + 1 N/O ZCK-M1H29 XES-P pole 1 N/C + 1 N/O ZCK-M5H29 XEN-P break before make 2-pole 1 N/O + 1 N/C ZCK-M6H29 XEN-P make before break ZCK-Y81 ZCK-Y91 2-pole 1 N/C + 1 N/C ZCK-M7H29 XEN-P pole 1 N/O + 1 N/O ZCK-M8H29 XEN-P XES-P21i1 XCK-Z09 XEN-P21i AB1-R11 2-pole 1 N/C + 1 N/C ZCK-M9H29 XES-P Accessories for limit switches type XCK-M Description Sold in Unit Weight lots of reference kg Tap off terminal for cabling continuity 1 XCK-Z Clip-in markers (strips of 10 markers : 0 to 9) 25 AB1-R For markers with other markings please refer to "Automation components Catalogue (1) : N/C contact with positive opening operation or sub-assembly for positive opening operation. (2) Adjustable throughout 360 in 5 steps, or in 90 steps by reversing the notched washer. (3) Adjustable throughout 360 in 5 steps, or in 45 steps by reversing the lever mounting. Other versions Contact blocks with gold flashed contacts. Please consult your local Customer support centre. Te 37

5 References : pages 35 to 37 Setting-up, dimensions Function diagrams Heads ZCK-D10, D109 with body 4,5(P) 0 5,5mm 0,9 Heads ZCK-D02, D029 with body 4,5(P) 0 5,5mm 0,9 3,1(A) 7,8(P) 1,5 3,2(P) 0 3 5,5mm 3,1(A) 5,6(P) 0 5,2 mm 3,1 3 4,4(P) 5,5mm 5,2(A) 7,6(P) 9mm 3,2(P) 5,6(P) 5,5mm 3,1(A) 9mm 5,5mm 3,1(A) 9mm 3,1(A) 7,8(P) 1,5 Heads ZCK-D21, D23, D219, D239 with body 4,6(A) 11,1(P) 2,2 4,6(A) 11,1(P) 2,2 Heads ZCK-D15, D16, D17, D41, D59, D81, D91 with body (P) ,6(A) 8(P) 0 7,6 mm (P) ,6 11,1(P) 4,6(A) mm (P) (P) 4,6(A) 43 (P) mm ,6(A) mm (P) Heads ZCK-D06, D08 with body Contact operation g contact closed h contact open Dimensions Body/contact assemblies ZCK-M1, M5, M6, M7, M8, M9 (A) = cam displacement (P) = positive opening point 6 Ø 6 Ø 63,6 58,5 63,6 58,5 (1) = = (1) = = (1) 3 cable entries, tapped for M20 cable glands Ø : 2 elongated holes Ø 5.2 x Te

6 References : pages 35 to 37 Dimensions Plunger heads ZCK-D10 ZCK-D109 ZCK-D02 4 Ø12 Ø10 Ø10 48,5 ZCK-D029 ZCK-D21, D23 ZCK-D219, D239 4 Ø12 8 Ø20 8 Ø Rotary heads ZCK-D15, D16, D17 ZCK-D41 ZCK-D Ø ,5 31,7 5,5 Ø19 34,5 60,5 29, ,5 Ø6 (1) (2) ZCK-D81 ZCK-D Ø8 112 Ø3 117,5 56 Multi-directional heads ZCK-D06 56 ZCK-D08 (1) 190 max. (2) max. Note : operating lever spindle threaded M6 Ø1,2 Ø6 2,5 129,5 Te 39