LED INDOOR Lighting Guide

Transcription

1 LED INDOOR Lighting Guide 1

2 LED INDOOR Lighting Guide Table of Contents Highbays... 3 Vapor Proof Strips Flat Panels Center Baskets LED Covered Strips Work Lights

3 LED UFO High Bay LUHB Series Features Magnesium alloy heatsink Ultra-durable Powder Coat Paint Standard Color Black Comes standard with a high bay hanging hook. Pendant mount possible using 1/2 threaded conduit entry on top Fixtures included approx. 1 ft long dimming leads and approx. 6 ft long input power cable stripped at ends. Color Temperature: 5000K standard (cool white), other colors available (special order, lead times apply) Color Rendering Index (CRI): > 80 Long LED life; L 70 > 50,000 hours Rated for Ambient Temperatures between -40 C/-40 F to 50 C/122 F Input Voltage: MV: V; 50/60 Hz Input Voltage: HV: V; 50/60 Hz Power Factor (PF) > 0.95 Total Harmonic Distribution (THD) < 20% Dimmable: 0-10Vdc Distribution: 120 beam angle standard, 60/70/90 possible with reflector accessory (sold separately) Tempered, super transparent glass UL/cUL Listed IP65 Warranty: 5 years Ordering Information Model Series LUHB LED UFO High Bay CCT Nominal Input Power Input Voltage K essories Specification Sheet Applications Warehouse Auditorium Dimensions Diameter (in) Height (in) Weight (lbs) Retail Space Manufacturing Facility Comparable to HID LUHB DLC ID A: 100W, 13,000 Lm W PLP3GHIFNXB1 B: 150W, 19,500 Lm MV V, 50/60 Hz W PLQTEGWWRBV2 C: 200W, 26,000 Lm W PLUBKO24GQIE D: 300W, 40,500 Lm HV* V, 50/60 Hz *Call factory for lead time and minimum order quantities. LUHB50DHV is not DLC listed. Accessories LUHB - MV Models LUHB - HV Model Installation Instructions IES Zip File W Not Listed Photometrics LUHB-ALR Aluminum Reflector Φ 14 x 5.9 Deep LUHB-ALR Aluminum Reflector Φ 14 x 6 Deep LUHB-PCR Polycarbonate Reflector Φ 16 x 10.5 Deep 60 Reflector 70 Reflector 90 Reflector 120, Standard/no Reflector 3 Page 1 of 1 Rev: 12/18/2018

4 Mini High Bay Value & Performance You Deserve Both. Specification Sheet MHB Proudly Designed & Assembled IN THE USA* Applications Warehouse Cafeteria Gymnasium Manufacturing Facility Auditorium Features Full body construction (white finish) Premium LEDs Available in 4000K and 5000K with CRI>80 Over 70% lumen maintenance at 100,000 hours Suitable for ambient temperature up to 55 C (131 F) for MHBA and MHBD models. Temperature rating is configuration dependent and detail is provided under performance table on page 3. Power Factor (PF) >0.9 Total Harmonic Distortion (THD) 20% Driver standard with 0 10V dimming Inbuilt surge protection Ideally suited for suspension mounting with optional wire cable hanging kit or chain and V-clips Access plate on back of the fixture for quick and easy wiring Available options: Clear and Frosted Lens Wireguard Choose Option -D or -M for Title 24 compliance in California Factory Installed Cord/Cordset UL Listed for Damp Locations Warranty: 5 years Model Selection Guide Model # Lumen Output *Foreign and domestic components. Suggested Description MHB series highbay fixture offers quality lighting for wide ranging applications and delivers excellent energy savings compared to fluorescent and HID fixtures. This fixture series is available in multiple lumen outputs and is configurable with various options to meet your needs. Benefits Designed for long LED life Energy saving compared to HID and fluorescent systems Exceptional color rendering High system efficacy up to 166 Lm/W System Designed, Manufactured, Tested, and Approved by Howard Industries in Mendenhall, Mississippi Compliant with safety and performance standards Dimensions MHB A,B & C Length: 16, Width: 14, Depth: 3.5 MHB D,E & F Length: 30, Width: 14, Depth: 3.5 Mounting Height Fluorescent Replacement HID Replacement MHBA 15, Lamp - T8 32W 250W MHBB 22, MHBC MHBD 4-Lamp T5 HO 54W 8-Lamp T8 32W 29, Lamp T5 HO 54W 400W MHBE 46,000 8-Lamp T5 HO 54W 750W MHBF 56, Lamp T5 HO 54W 1000W Visit for the Qualified Product List Installation Instructions IES Zip File Page 1 of 4 Rev: 11/2/2018 4

5 Ordering Information Specification Sheet MHB Series Configuration Color Lens Input Voltage Options Cord Set Options MHB C 4K 0 MV M 05 MHB Mini High Bay A: 15,500 Lumens, 95W B: 22,500 Lumens, 150W C 1 : 29,500 Lumens, 195W D: 29,500 Lumens, 185W E: 46,000 Lumens, 320W F 1 : 56,500 Lumens, 385W 4K: 4000K 5K: 5000K 0: No Lens C: Clear Acrylic Lens F: Frosted Acrylic Lens MV: V AX: 480V (Blank): No FIOs A 2 : Occ. Sensor (on/off only; 120/277V or 480V as required; contact factory for 208/240V) B 3 : Emergency Battery Backup (up to 1800 lm) D 4 : Dimming Occ. Sensor (remote capable; 120/277V or 480V as required; contact factory for 208/240V) M 4 : Microwave Sensor (120/277V) G: Wire Guard S: Surge Protection (20kV) J: Pendant Mount J-Box U 5 : Adjustable Output Unit (AOU) (Blank): Standard Disconnect 01: 6 SJT 18/3 (no plug) 02: 10 SJT 18/3 (no plug) 03: 6 SJT 18/3 L5-15 twist lock 120V 05: 6 SJT 18/ non twist lock 120V 07: 6 SJT 18/3 L7-15 twist lock 277V 09: 6 SJT 7-15 non twist lock 277V 1 Lens configurations with MHBC and MHBF Series fixtures are not recommended for ambient temperature above 35 C (95 F). Lens options for these fixtures are NOT offered in 480V construction. 2 Not pre-assembled to fixture. 3 Cord set options are not offered with emergency battery backup option due to an unswitched AC power source requirements for the emergency module. Lumen output is dependent on lens configuration. Lumen output is reduced by up to 20% with a frosted lens. Option -S is not connected to protect the emergency driver, it is connected to protect the rest of the fixture. 4 Choose option D, or -M for Title 24 compliance in California. 5 AOU is a factory installed, passive 8-position, 0-10V step-dimmer that can be easily adjusted with a flat-blade screwdriver. The unit comes factory set at #8 which is the maximum output level. Approximate wattage input percentages are shown in the table below. The unit consumes negligible standby power and can be removed to convert the luminaire to standard 0 10V dimming. DO NOT combine option -M & -U or -D & -U. AOU Position Selector Guide Input Power* (in percentage of original power) *Input power provided for estimation purposes only. Actual usage may vary by ±3%. Accessory Guide #8 #7 #6 #5 #4 #3 #2 #1 100% 92% 81% 70% 59% 49% 39% 28% Compatible Models Model Number Description MHB-CLF Clear Acrylic Lens w/steel Frame. MHB- A, B, C MHB- D, E, F MHB- A, B, C, D, E, F MHB-FLF MHB-WG MHB-WGF MHB2-CLF MHB2-FLF MHB2-WG MHB2-WGF HF-WCH3 HF-2CV HF-3CV HLP-OS-FSIR-100 Frosted Acrylic Lens w/steel Frame. Wire Guard for use with fixtures with a lens and frame preinstalled. Wire Guard with Steel Frame for use with fixture without a lens. Clear Acrylic Lens w/steel Frame. Frosted Acrylic Lens w/steel Frame. Wire Guard for use with fixtures with a lens and frame preinstalled. Wire Guard with Steel Frame for use with fixture without a lens. Wire Cable Hanging Kit (2 pcs/kit, 5 foot long). Hanging Chains (2 foot) and V-clips Hanging Chains (3 foot) and V-clips Wireless handheld configuration tool for Watt Stopper Sensors (option D sensors) Page 2 of 4 Rev: 11/2/2018 5

6 Specification Sheet MHB Emergency Battery Backup Model Number Light Engines illuminated ~ Lumen Output MHBA & MHBD 2 Engines MHBB, MHBC, MHBE, MHBF 1 Engine 1800 lm Adjustable Output Unit Additional Product Images Dimensions: Length: 2.0, Width: 1.3, Depth: 0.8 Page 3 of 4 Rev: 11/2/2018 6

7 MHBA MHBB MHBC MHB Performance Details Configuration Lumen Output 5000K; 83CRI 4000K; 83CRI Input Power (W) Efficacy CCT No-Lens 15,965 15,678 Clear 480V 13,814 13, Frosted 13,233 12, Max. Ambient Temperature 55 C L70 (hours) 198k 185k L90 (hours) 55k 54k 161 (131 F) 198k 55k 175k 51k DLC Premium 5000K Premium No-Lens 23,170 22,754 Specification Sheet Clear 480V 20,050 19, Frosted 19,205 18, MHB 4000K Standard 149 (122 F) 155k 45k Premium 120k 34k Standard No-Lens 57,533 56, C (113 F) 145k 42k Premium Clear ,168 49, Not recommended 277V for ambient above 110k 34k Standard Frosted 47,836 46, C (95 F) No-Lens 15,857 15, Clear V 13,721 13, Frosted 13,143 12, No-Lens 23,013 22, k 49k 120- Premium Clear 19,914 19, V 125k 37k Frosted 19,075 18, C Standard No-Lens 29,905 29, C (113 F) 145k 42k Premium Clear ,083 24, Not recommended 277V for ambient above 110k 34k Standard Frosted 24,034 23, C (95 F) No-Lens 480V 30,187 29, C (104 F) 142k 41k Premium MHBD MHBE MHBF No-Lens 30,152 29, C 198k 185k 55k 54k 155 (131 F) 198k 55k Premium Clear 480V 26,292 25, k 51k Frosted 25,070 24, Standard No-Lens 29,917 29, Clear V 26,087 25, Frosted 24,875 24, No-Lens 46,779 46, k 49k Premium 120- Clear 40,791 40, V 50 C 125k 37k Standard Frosted 38,894 38, (122 F) No-Lens 47,245 46, k 45k Premium 480V 337 Clear 41,197 40, k 34k Standard No-Lens 480V 57,985 56, C (104 F) 142k 41k Premium Page 4 of 4 Rev: 11/2/2018 7

8 LED Highbay Flat 4 Foot Linear Design Specification Sheet HLA1 Features Full body construction (white finish) Access plate on back of the fixture for quick and easy wiring Traditional style door with lens options Long life LEDs LEDs available in 4000K and 5000K with CRI>80 Up to 80% lumen maintenance at 60,000 hours Suitable for ambient temperature up to 40 C (104 F) Power Factor (PF) >0.9 Total Harmonic Distortion (THD) 20% Driver standard with 0-10V dimming (prewired for dimming option available) Ideally suited for suspension mounting with optional wire cable hanging kit or chain and V-clips Listings: UL listed for damp locations. ROHS compliant. HLA1 series products are listed on DLC QPL Premium Classification Warranty: 5 years Available options: Clear, Frosted, and Prismatic Lens Wireguard Occupancy Sensor with smart dimming control for additional savings (Factory Installed Option -D) Factory Installed Cord/Cordset Applications Warehouse Manufacturing Facility Gymnasium Cafeteria Auditorium Description HLA1 series highbay fixture offers quality lighting for wide ranging applications and delivers excellent energy savings compared to fluorescent and HID fixtures. This fixture series is available in multiple lumen outputs and is configurable with various options to meet your needs. Benefits Designed for optimal thermal performance and long LED life Energy saving compared to HID systems and fluorescent systems Exceptional color rendering High system efficacy up to 133 Lm/W System Designed, Manufactured, Tested, and Approved by Howard Industries in Mendenhall, Mississippi Compliant with safety and performance standards Dimensions: Length: 48, Width: , Depth: LED Product Partner Ordering Information Series Configuration # of LED Engines Color Lens Input Voltage Factory Installed Options (yyy) Cordset Options (yy) HLA1 HL: High Lumens HE: High Efficacy : 4000K 50: 5000K C: Clear F: Frosted P: Prismatic X: No Lens MV: VAC (blank): No FIO A: Std. Occ. Sensor D: Dimm. Occ. Sensor G: Wireguard P: Occ. Sensor with PC S: Surge Protection (20kV) V: Prewired for dimming (blank): Std. Disconnect 01: 6 SJT 18/3 (no plug) 02: 10 SJT 18/3 (no plug) 03: 6 SJT 18/3 L5-15 twist lock 120V 05: 6 SJT 18/ non twist lock 120V 07: 6 SJT 18/3 L7-15 twist lock 277V 09: 6 SJT 7-15 non twist lock 277V Page 1 of 2 Rev: 8/31/2018 8

9 LED Highbay Flat 4 Foot Linear Design Specification Sheet HLA1 Performance Details/Suggested LED Replacement vs. Fluorescent and HID Model # Lumen Output* Efficacy Input Power Suggested Replacement (lm/w) 5000K; 85CRI 4000K; 82CRI CCT Fluorescent HID HLA1 HL 12 35,876 35, Lamp T5HO; 10 Lamp T HLA1 HE 12 28,960 29, Lamp T5HO; 8-Lamp T8 400 HLA1 HL 08 24,411 24, Lamp T5HO; 8-Lamp T8 400 HLA1 HE 08 19,400 19, Lamp T8 250 *Lumen output is reduced by ~8.5% using a clear, ~11% with frosted lens, and ~15% with prismatic lens Operating Temperatures Model # Ambient Temperature Rating C No Lens With Lens HLA1 HL to to 50 HLA1 HL to 45 HLA1 HE 12 HLA1 HE to 55 Field Installed Options Ordering Page 2 of 2 Rev: 8/31/2018 9

10 LED Highbay Flat 4 Foot Linear Design Specification Sheet HLA2 Features Full body construction (white finish) Access plate on back of the fixture for quick and easy wiring Traditional style door with lens options Long life LEDs LEDs available in 4000K and 5000K with CRI>80 Up to 80% lumen maintenance at 60,000 hours Suitable for ambient temperature up to 55 C (131 F) Power Factor (PF) >0.9 Total Harmonic Distortion (THD) 20% Driver standard with 0-10V dimming (prewired for dimming option available) Ideally suited for suspension mounting with optional wire cable hanging kit or chain and V-clips Listings: UL listed for damp locations. ROHS compliant. HLA1 series products are listed on DLC QPL Premium Classification Warranty: 5 years Available options: Clear, Frosted, and Prismatic Lens Wireguard Occupancy Sensor with smart dimming control for additional savings (Factory Installed Option -D) Factory Installed Cord/Cordset Applications Warehouse Manufacturing Facility Gymnasium Cafeteria Auditorium Description HLA2 series highbay fixture offers quality lighting for wide ranging applications and delivers excellent energy savings compared to fluorescent and HID fixtures. This fixture series is available in multiple lumen outputs and is configurable with various options to meet your needs. Benefits Designed for optimal thermal performance and long LED life Energy saving compared to HID systems and fluorescent systems Exceptional color rendering High system efficacy up to 139 Lm/W System Designed, Manufactured, Tested, and Approved by Howard Industries in Mendenhall, Mississippi Compliant with safety and performance standards Dimensions: Length: 48, Width: 13.75, Depth: Visit for the Qualified Products List LED Product Partner Ordering Information Series Configuration Color Lens Input Voltage Factory Installed Options (yyy) Cordset Options (yy) HLA2 HL08: High Lumens, 8 Engines HE08: High Efficacy, 8 Engines HL06: High Lumens, 6 Engines HE06: High Efficacy, 6 Engines 40: 4000K 50: 5000K C: Clear F: Frosted P: Prismatic X: No Lens MV: VAC (blank): No FIO A: Std. Occ. Sensor D: Dimm. Occ. Sensor G: Wireguard P: Occ. Sensor with PC S: Surge Protection (20kV) V: Prewired for dimming (blank): Std. Disconnect 01: 6 SJT 18/3 (no plug) 02: 10 SJT 18/3 (no plug) 03: 6 SJT 18/3 L5-15 twist lock 120V 05: 6 SJT 18/ non twist lock 120V 07: 6 SJT 18/3 L7-15 twist lock 277V 09: 6 SJT 7-15 non twist lock 277V Page 1 of 2 Rev: 8/31/

11 LED Highbay Flat 4 Foot Linear Design Specification Sheet HLA2 Performance Details/Suggested LED Replacement vs. Fluorescent and HID Model # Lumen Output* Efficacy Input Power Suggested Replacement (lm/w) 5000K; 85CRI 4000K; 82CRI CCT Fluorescent HID HLA2 HL 08 23,548 23, Lamp T5HO; 8-Lamp T8 400 HLA2 HE 08 19,400 19, Lamp T5HO; 6-Lamp T8 400 HLA2 HL 06 14,550 14, Lamp T8 250 HLA2 HE 06 14,010 14, Lamp T8 250 *Lumen output is reduced by ~8.5% using a clear, ~11% with frosted lens, and ~15% with prismatic lens Operating Temperatures Model # Ambient Temperature Rating C No Lens With Lens HLA2 HL to to40 HLA2 HE 08 HLA2 HL 06 HLA2 HE to 55 Field Installed Options Ordering Page 2 of 2 Rev: 8/31/

12 Specification Sheet H2L/H4L High-bay Linear LED Series Efficient. Powerful. Elegant. Description H2L/H4L series High-bay LED fixture offers quality lighting for wide-ranging applications and delivers excellent energy savings compared to linear fluorescent and HID high-bay fixtures. This fixture series is available in multiple lumen outputs and is configurable with various options to meet any need. This series is assembled in USA with domestic and imported components facilitating quick shipment of large custom projects. Applications Warehouse Manufacturing Facility Gymnasium Cafeteria Auditorium Benefits Designed for optimal thermal performance and long LED life; L70 is theoretically calculated to be greater than 100,000 hours Energy saving compared to HID systems and fluorescent systems High system efficacy up to 138 Lm/W Designed, Manufactured, Tested, and Approved by Howard Industries in Mendenhall, Mississippi. Features Rigid body construction (white finish) Tool-less driver access from below the fixture for easy maintenance and serviceability Easy access to lens through end of fixture LED s available in 4000K and 5000K with 80+ CRI Standard 0-10V continuous dimming driver (up to 5%) Ideally suited for suspension mounting with optional wire cable hanging kit or chain and V-clips Available in Wide and Narrow light distributions Listings: UL Listed for damp locations. Not UL Listed for Recessed Mounting Applications. RoHS compliant and luminaire complies with IESNA LM-79 and LM-80 standards. Standard: Multi-volt ( V) input Minimum starting temperature: -40 C Suitable for ambient temperatures up to 55 C (131 F) Warranty: 5 years Available options: Frosted, or Clear Lens Wire guard Occupancy Sensor with smart dimming controls for additional energy savings Dimensions Visit for the Qualified Product List LED Product Partner 12 Page 1 of 2 Rev: 5/10/2018

13 Specification Sheet H2L/H4L Ordering Information Model Family Lumens Distribution CCT Lens Input Volts Factory Installed Options Cord set Options Packaging H4L 22 W 5K F MV H2L 2 Ft. Linear H4L 4 Ft. Linear 11: 12,000 Lumens 16: 18,000 Lumens 21: 24,000 Lumens 22: 26,000 Lumens 33: 38,000 Lumens 44: 50,000 Lumens W: Wide Dist. N: Narrow Dist 1. W: Wide Dist. N: Narrow Dist 1. 4K: 4000K 5K: 5000K 0: No Lens C: Clear Lens 2 F: Frosted Lens 2 MV: V AX: V 0000 or (blank): No FIOs A: Occ. Sensor B: Emergency Ballast M: Snap-in Occ. sensor ( V) P: Occ. Sensor with Photocell G: High-bay Wire guard J: J-Box Pendant Mount 3 I: Special Wiring Instructions V: Pre-wired for Dimming 00 or (blank): Standard Disconnect 01: 6 SJT 18/3, no plug 03: 6 SJT 18/3 L5-15, twist lock 120V 05: 6 SJT 18/3 5-15non twist lock 120V 07: 6 SJT 18/3 L7-15 twist lock 277V 09: 6 SJT 7-15 non twist lock 277V 0 or (blank): Standard I: Single X: Special 1. Narrow distribution not available with H2L21 and H4L44 series. 2. Lens availability only with Wide Distribution (W). 3. Available with H4L series only. Call for lead times. Performance Table Model # Lumen Output Input 5000K CCT 4000K CCT Power (W) Efficacy (5000K); LPW Suggested Fluorescent Replacement Suggested HID Replacement HPS Input Watts MH/PSMH Input Watts Fluorescent T8 Fluorescent T5HO H2L11W 12,730 12, Lamp T8 175/ / N/A H2L16W 19,420 18, Lamp T / N/A H2L21W 25,560 24, Lamp T5HO / H4L22W 27,350 26, Lamp T5HO / H4L33W 40,300 38, Lamp T5HO / H4L44W 53,340 50, Lamp T5HO; 10- Lamp T / Field Installed Options H2L-WG & H4L-WG Wiregaurd Actual wireguard appearance may vary HF-2CV (2 foot) HF-3CV (3 foot) Hanging Chain & V-clips HF-WCH Wire Cable Hanging Kit (2 pcs per kit) Page 2 of 2 Rev: 5/10/

14 Specification Sheet HF LED-Ready Highbay LED-Ready Six / Eight Lamp Positions Four Foot - Flat Profile Design Lamps NOT Included Description The HF-LED Ready series high-bays are a great retrofit LED ready alternative to traditional HID highbay and fluorescent fixtures. This fixture uses 6 or 8, line voltage 4 LED lamps (Type B). Benefits Energy Saving Compared to HID systems Quality Lamp holders Computer Designed Reflectors Compatible Linear LED Lamps F32T8/8xx/LED/16W/AC Proudly Designed & Assembled IN THE USA* Applications Warehouse Manufacturing Facility Auditorium Gymnasium Cafeteria Features No ballast installed Includes shunted and non-shunted T8 lamp holder so they are compatible with single-ended and double-ended 4 LED tubes (Type B) Easy access to wiring compartment Access plate provides access to electrical wiring with-out the need to open the fixture Knock-outs for easy electrical wiring and assembly Heavy Duty pre-painted steel construction Can be easily mounted by a single person Suspended mounting insures a quick painless install Chain and V-Clip Hanging option Standard specular aluminum reflector (86%) Wire cable hanging option. Access plate Cable hanging Holes for V clip & chain hanging H L W Reflector Assembly pivoted open after removal of 2 screws*. click image for spec sheet LAMPS NOT INCLUDED Ordering Information Model No. of Lamp Positions** Reflector (L) Length (W) Width (H) Height HFA1A6LT Standard Specular HFC1A8LT8 8 Aluminum (86%) 5.5 HFA3A6LT8 6 *Foreign and domestic components. **Lamps Not Included 14 Page 1 of 2 Rev: 3/12/2018

15 Specification Sheet HF LED-Ready Accessories - Sold Separately HF-2CV (2 foot) HF-3CV (3 foot) Hanging Chain & V-clips HFA-WCH Wire Cable Hanging Kit (2 pcs per kit) HFA1-WG Wire Guard (For use with HFA1 Model Only) HF-SK1 Stabilizer Kit (Hub, color and wire cable) HFC1-WG Wire Guard (For use with HFC1 Model Only) 15 Page 2 of 2 Rev: 3/12/2018

16 Specification Sheet HFA3 LED-Ready Highbay LED-Ready Six Lamp Positions Four Foot - Curved Profile Design Lamps NOT Included Description The HFA3-LED Ready series high-bays are a great retrofit LED ready alternative to traditional HID highbay and fluorescent fixtures. This fixture uses 6 line voltage 4 LED lamps (Type B). Benefits Energy Saving Compared to HID systems Quality Lamp holders Computer Designed Reflectors Compatible Linear LED Lamps F32T8/8xx/LED/16W/AC Proudly Designed & Assembled IN THE USA* Applications Warehouse Manufacturing Facility Auditorium Gymnasium Cafeteria Features No ballast installed Includes shunted and non-shunted T8 lamp holder so they are compatible with single-ended and double-ended 4 LED tubes (Type B) Easy access to wiring compartment Access plate provides access to electrical wiring with-out the need to open the fixture Knock-outs for easy electrical wiring and assembly Heavy Duty pre-painted steel construction Can be easily mounted by a single person Suspended mounting insures a quick painless install Chain and V-Clip Hanging option Standard specular aluminum reflector (86%) Wire cable hanging option. Curved design for better light distribution Rigid heavy gage prepainted steel body Contractor friendly one screw access to electrical connections through this access plate removable from the outside Hinged reflector/socket bar assembly for easy two screw access to the ballast compartment Factory Installed Option J Pendant Mount Kit (PMK2) installs from the outside: no need to open the fixture Wire Cable Hanging mounting option (WCH) Chain and V-Clip mounting option (CV) Six 3/4 knockouts for easy wiring access 4 on top and one on each end provides clean mounting for occupancy sensor click image for spec sheet LAMPS NOT INCLUDED Pendant Mount lances included only if Factory Installed Option J is selected. Ordering Information Model No. of Lamp Positions** Reflector (L) Length HFA3A6LT8 6 Standard Specular Aluminum (86%) (W) Width (H) Height *Foreign and domestic components. **Lamps Not Included 16 Page 1 of 2 Rev: 3/12/2018

17 Specification Sheet HFA3 LED-Ready Accessories - Sold Separately HF-2CV (2 foot) HF-3CV (3 foot) Hanging Chain & V-clips HFA-WCH Wire Cable Hanging Kit (2 pcs per kit) HFA1-WG Wire Guard (For use with HFA1 Model Only) HF-SK1 Stabilizer Kit (Hub, color and wire cable) HFC1-WG Wire Guard (For use with HFC1 Model Only) 17 Page 2 of 2 Rev: 3/12/2018

18 4-Foot LED Vaporproof Strip Designed for tough environments Specification Sheet Applications Entrance Lighting Car Washes Public Access Parking Structures Marinas & Offshore VSL4 Beverage Industry Food Processing Construction Sites Industrial Lighting Referigerator Storage Description VSL4 series LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, and damage from external ice formation. Features High output LEDs provide 80+ CRI L70 is predicted to be greater than 120,000 hours Standard: Multi-volt ( V) input Suitable for ambient temperatures between -30 C to 55 C Driver standard with 0 10V dimming UL Listed 5 Year warranty System Designed, Manufactured, Tested, and Approved in Mendenhall, Mississippi *Foreign and domestic components. Sample Ordering Information VSL4F05540U 4-Foot LED Vaporproof Strip Impact resistant frosted acrylic lens 7,700, Lumens, 55W, 4000K Color No Factory Installed Options Standard Disconnect Rapid Ship Model Available for Next Day Shipment VSL4F05540U Ordering Information Proudly Designed & Assembled IN THE USA* Model Length Lens Configuration CCT VSL 4: 4-Foot A: Impact Resistant Acrylic F: Impact Resistant Frosted Acrylic 040: 5,300 Lumen, 40W 055: 7,700 Lumen, 55W 070: 9,150 Lumen, 67W 40: 4000K 50: 5000K Benefits Energy saving compared to fluorescent systems Exceptional color rendering Available in multiple color options High system efficacy Long LED life Specifications One-piece upper body; no seams to crack, break or leak Reinforced fiberglass body is rugged and corrosion resistant 5VA Flammability rating (will not melt or burn) Closed cell polyester gasket High gasket compression recovery ensures solid seal over life of fixture Knockouts on each end Certifications Input Voltage U: V 18 (f1) IP66 CERTIFIED Factory Installed Options (blank): White Plastic Latches B 1 : Emergency Battery Backup (1,100 lumens) H: Chain Hanging Bracket S: Stainless Steel Latches Cordset 2 RoHS Compliant (blank): Standard Disconnect 01: 6, no plug 02: 10, no plug 03: 6, twist lock 120v 04: 10 twist lock 120v 05: 6 non twist lock 120v 06: 10 non twist lock 120v 07: 6 twist lock 277v 08: 10 twist lock 277v 09: 6 non twist lock 277v 10: 10 non twist lock 277v 1 Cord set options are not offered with emergency battery backup option due to an unswitched AC power source requirements for the emergency module. Lumen output is dependent on lens configuration. 2 Call factory for custom cord requirements Page 1 of 4 Rev: 1/25/2019

19 Dimensions H Specification Sheet L Length (in.) 53.2 W1 Min Width (in.) 6.77 W2 Max Width (in.) 7.5 H1 Fixture Height (in.) 4.13 H2 Lens Height (in.) 2.23 VSL4 H W1 W L 51.6 Replacement Accessories Category Model Name Description Installation Shipped fully wired Easy access to wiring compartment and driver via removable gear tray Gear tray tethered to housing by two lanyards for extra safety Knockouts on each end Spring-mount, stainless bracket allows for surface or chain mount Brackets Install first, then snap securely on fixture NEC compliant luminaire power dissconnect standard VSA4-ACR-LENS Replacement acrylic lens part for VSL4 series fixtures. Lens VSL4-FRAC-LENS Replacement frosted acrylic lens part for VSL4 series fixtures. VSA4/PC-LATCH Polycarbonate Latch & Endplug kit (8 latches and 2 end plugs) Latch VSA4/SS-LATCH Stainless Steel Latch & Endplug kit (8 latches and 2 end plugs) VSAX-MB-2L-2 VSL Series stainless steel mounting bracket set (2 brackets per set) Mounting Bracket VSAX-MB-2L-2-45 VSL Series wall mounting bracket set, stainless steel, 45 (2 bracket per set) Hanging Cable VS-CB VSL stainless steel chain hanging bail (Qty 2) 19 Page 2 of 4 Rev: 1/25/2019

20 Specification Sheet VSL4 Hardware - Latches White Plastic Stainless Steel - withstands corrosive environments White Plastic Latch locks open during maintenance Captive Keeper secures latch to housing preventing accidental loss of latch Keeper Latch Features: Latches can be made Tamper Resistant with the addition of locking screws* - White Plastic #4-32 x 1/2 Screws, 3/4 max. length - Stainless Steel #6-32 x 3/8 Screws, 3/4 max. length *Screws not included in fixture Stainless Steel Mounting Brackets (Model# VSAX-MB-2L-2) Come standard with every fixture VSL4 Performance Details Model Lens Configuration CCT Lumen Output 040 Input Power (W) Efficacy (Lm/W) 4000K K DLC A K K VSL K K K K Premium F K K K K Page 3 of 4 Rev: 1/25/2019

21 Specification Sheet VSL4 Certifications for VSL4 IP65 IP66 IP 67 (f1) Low pressure water jets from 2.5 to 3 metres in all directions. 6.3mm dia. nozzle from 2.5 to 3 metresdistance,12.5 l/min. for 3 min. Strong jets of water from all directions during and immediately after de-energizing the unit. 12.5mm dia. nozzle from 2.5 to 3 metres distance,100 l/min. for 3 min. Protected against the effects of temporary immersion. Immersed in tank with water 0.15 m above top and 1 m above bottom. For 30 min. This indicates that the material has met both UV and water exposure or immersion requirements as called out in UL746C. The material is suitable for outdoor use, where parts are subject to frequent or extended periods of exposure to sun light, exposure to water, and immersion in accordance with UL 746C. Guardian Seal is a unique combination of our Injection Molded lenses and high performance poured in place gasket. This provides the most advanced sealing system available. 21 Page 4 of 4 Rev: 1/25/2019

22 8-Foot LED Vaporproof Strip Designed for tough environments Specification Sheet Applications Entrance Lighting Car Washes Public Access Parking Structures Marinas & Offshore VSL8 Beverage Industry Food Processing Construction Sites Industrial Lighting Referigerator Storage Proudly Designed & Assembled IN THE USA* Description VSL8 series LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, and damage from external ice formation. Features High output LEDs provide 80+ CRI L70 is predicted to be greater than 120,000 hours Standard: Multi-volt ( V) input Suitable for ambient temperatures between -30 C to 55 C Driver standard with 0 10V dimming UL Listed 5 Year warranty System Designed, Manufactured, Tested, and Approved in Mendenhall, Mississippi *Foreign and domestic components. Sample Ordering Information VSL8F11040U 8-Foot LED Vaporproof Strip Impact resistant frosted acrylic lens 15,400, Lumens, 109W, 4000K Color No Factory Installed Options Standard Disconnect Ordering Information Model Length Lens Configuration CCT VSL 8: 8-Foot A: Impact Resistant Acrylic F: Impact Resistant Frosted Acrylic 055: 7,700 Lumen, 55W 070: 9,150 Lumen, 67W 110: 15,400 Lumen, 109W 140: 18,300 Lumen, 134W 40: 4000K 50: 5000K Benefits Energy saving compared to fluorescent systems Exceptional color rendering Available in multiple color options High system efficacy Long LED life Specifications One-piece upper body; no seams to crack, break or leak Reinforced fiberglass body is rugged and corrosion resistant 5VA Flammability rating (will not melt or burn) Closed cell polyester gasket High gasket compression recovery ensures solid seal over life of fixture Knockouts on each end Certifications (f1) Input Voltage U: V IP66 CERTIFIED Factory Installed Options (blank): White Plastic Latches B 1 : Emergency Battery Backup (1,100 lumens) H: Chain Hanging Bracket S: Stainless Steel Latches Cordset 2 RoHS Compliant (blank): Standard Disconnect 01: 6, no plug 02: 10, no plug 03: 6, twist lock 120v 04: 10 twist lock 120v 05: 6 non twist lock 120v 06: 10 non twist lock 120v 07: 6 twist lock 277v 08: 10 twist lock 277v 09: 6 non twist lock 277v 10: 10 non twist lock 277v 1 Cord set options are not offered with emergency battery backup option due to an unswitched AC power source requirements for the emergency module. Lumen output is dependent on lens configuration. 2 Call factory for custom cord requirements 22 Page 1 of 4 Rev: 1/25/2019

23 Specification Sheet VSL8 Dimensions L Length (in.) 100 H H W1 W Replacement Accessories L Category Model Name Description W1 Min Width (in.) 6.77 W2 Max Width (in.) 7.5 H1 Fixture Height (in.) 4.13 H2 Lens Height (in.) 2.23 Installation Shipped fully wired Easy access to wiring compartment and driver via removable gear tray Gear tray tethered to housing by two lanyards for extra safety Knockouts on each end Spring-mount, stainless bracket allows for surface or chain mount Brackets Install first, then snap securely on fixture NEC compliant luminaire power dissconnect standard VSA8-ACR-LENS Replacement acrylic lens part for VSL8 series fixtures. Lens VSL8-FRAC-LENS Replacement frosted acrylic lens part for VSL8 series fixtures. VSA8-PC-L&P Polycarbonate Latch & Endplug kit (14 latches and 2 end plugs) Latch VSA8-SS-L&P Stainless Steel Latch & Endplug kit (14 latches and 2 end plugs) VSAX-MB-2L-2 VSL Series stainless steel mounting bracket set (2 brackets per set) Mounting Bracket VSAX-MB-2L-2-45 VSL Series wall mounting bracket set, stainless steel, 45 (2 bracket per set) Hanging Cable VS-CB VSL stainless steel chain hanging bail (Qty 2) 23 Page 2 of 4 Rev: 1/25/2019

24 Hardware - Latches White Plastic Specification Sheet Stainless Steel - withstands corrosive environments VSL8 White Plastic Latch locks open during maintenance Captive Keeper secures latch to housing preventing accidental loss of latch Keeper Latch Features: Latches can be made Tamper Resistant with the addition of locking screws* - White Plastic #4-32 x 1/2 Screws, 3/4 max. length - Stainless Steel #6-32 x 3/8 Screws, 3/4 max. length *Screws not included in fixture Stainless Steel Mounting Brackets (Model# VSAX-MB-2L-2) Come standard with every fixture VSL8 Performance Details Model Lens Configuration CCT Lumen Output 055 Input Power (W) Efficacy (Lm/W) 4000K K DLC A K K K K VSL K K K K Premium F K K K K K K Page 3 of 4 Rev: 1/25/2019

25 Specification Sheet VSL8 Certifications for VSL8 IP65 Low pressure water jets from 2.5 to 3 metres in all directions. 6.3mm dia. nozzle from 2.5 to 3 metresdistance,12.5 l/min. for 3 min. IP66 Strong jets of water from all directions during and immediately after de-energizing the unit. 12.5mm dia. nozzle from 2.5 to 3 metres distance,100 l/min. for 3 min. IP 67 Protected against the effects of temporary immersion. Immersed in tank with water 0.15 m above top and 1 m above bottom. For 30 min. (f1) This indicates that the material has met both UV and water exposure or immersion requirements as called out in UL746C. The material is suitable for outdoor use, where parts are subject to frequent or extended periods of exposure to sun light, exposure to water, and immersion in accordance with UL 746C. Guardian Seal is a unique combination of our Injection Molded lenses and high performance poured in place gasket. This provides the most advanced sealing system available. 25 Page 4 of 4 Rev: 1/25/2019

26 Vaportight LED Strip EVSL Series, 4-Foot Strip Features Polycarbonate lens and housing provide durability under demanding environments Color Rendering Index (CRI): > 80 Color Options: 4000K, 5000K CCT High efficacy >130 LPW Long LED life; L 70 > 120,000 hours* Rated for Ambient Temperatures between -30 C/- 22 F to 50 C/122 F Power Factor (PF) > 0.9 Total Harmonic Distortion (THD) < 20% Input Voltage: MV: V; 50/60 Hz Dimmable: 0-10Vdc UL/cUL Listed suitable for wet locations IP65 Warranty: 5 years *L 70 hours are IES TM calculated hours. Mounting Options V-Hooks included Surface Mounting hardware included Multiple drill locations allow for other mounting options. Requires 7/8 step drill. Dimensions Specification Sheet EVSL Applications Parking Garage Canopies Utility Lighting Eaves Walkways Low Bay Warehouses Stairwells Industrial/commercial 50 5 Ordering Information Example: EVSL44040MV Model Series EVSL4 4-Foot, LED Vaportight Strip 3.5 Configuration 4040: 40W, 4000K, 5200 Lm 6540: 65W, 4000K, 8450 Lm 6550: 65W, 5000K, 8500 Lm Input Voltage MV V, 50/60 Hz Remarks Factory Installed Options Dimmable Be careful with chemical exposure. Please consider our (Blank): Plastic Latches S: Stainless Steel Latches YES 0 10VDC Installation Instructions IES Zip File VSL4 series, for swimming pool, car wash, or other outdoor applications with prolonged moisture/uv exposure. Accessories (Field Installed Options) Model Description EVSL4-FR-LENS Replacement frosted polycarbonate lens for EVSL4 series fixtures. EVSL4/PC-LATCH Replacement Polycarbonate Latches (10 latches per bag) EVSL4/MT-LATCH Replacement Stainless Steel Latches (10 latches per bag) HL-BLEDEM-CP lumen Emergency Battery Backup HL-BLEDEM-CP lumen Emergency Battery Backup HL-BLEDEM-CP lumen Emergency Battery Backup LCPCMV External Mount Photocell, VAC; Swivel and Side Lens RoHS Compliant IP65 Page 1 of 1 Rev: 12/18/

27 4 LED Vaporproof Strip 1 3 Lamps Specification Sheet VSB4 Description VSB4 series 4 LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, and damage from external ice formation. Features High output LEDs provide 80+ CRI L70 is predicted to be greater than 50,000 hours Standard: Multi-volt ( V) input UL Listed 5 Year warranty System Designed, Manufactured, Tested, and Approved in Mendenhall, Mississippi Certifications Applications Entrance Lighting Car Washes Public Access Parking Structures Beverage Industry Food Processing Construction Sites Industrial Lighting Benefits Energy saving compared to fluorescent systems Exceptional color rendering Available in multiple color options High system efficacy Long LED life Specifications One-piece upper body; no seams to crack, break or leak Reinforced fiberglass body is rugged and corrosion resistant 5VA Flammability rating Closed cell polyester gasket High gasket compression recovery ensures solid seal over life of fixture Knockouts on each end Dimensions 4.13 Sample Ordering Information VSB4F216D 4-Foot LED Vaporproof Strip Impact resistant frosted acrylic lens 2 T8 LED Lamps 4,000K Color No Factory Installed Options Standard Disconnect VS-CB Stainless Steel Chain Bail (2 needed per fixture, order separately) Ordering Information Model Lens No. of Lamps Lamp CCT Factory Installed Options VSB4 A: Impact Resistant Acrylic F: Impact Resistant Frosted Acrylic P: UV Stabilized Polycarbonate 1: 1 Lamp 2: 2 Lamps 3: 3 Lamps 16: 16 Watt/2,200 Lumens per lamp D: 4000K F: 5000K (blank): White Plastic Latches H: Chain Hanging Bracket S: Stainless Steel Latches Cordset (blank): Standard Disconnect 01: 6, no plug 02: 10, no plug 03: 6, twist lock 120v 04: 10 twist lock 120v 05: 6 non twist lock 120v 06: 10 non twist lock 120v 07: 6 twist lock 277v 08: 10 twist lock 277v 27 Page 1 of 2 Rev: 1/25/2019

28 Specification Sheet VSB LED-Ready Vaporproof LED-Ready Strip Two - Four Lamp Positions Four Foot / Eight Foot Lamps NOT Included Proudly Designed & Assembled IN THE USA* Description VSB series LED-Ready vaporproof strip fixtures are gasketed to provide dust and moisture resistant illumination. They withstand corrosion, splashing water, hose-directed water, and damage from external ice formation. This fixture uses 2, 3 or 4, line voltage 4 LED lamps (Type B). Certifications Applications Entrance Lighting Car Washes Public Access Parking Structures Beverage Industry Food Processing Construction Sites Industrial Lighting Specifications No ballast installed Includes shunted and non-shunted T8 lamp holder so they are compatible with single-ended and double-ended 4 LED tubes (Type B) One-piece upper body; no seams to crack, break or leak Reinforced fiberglass body is rugged and corrosion resistant 5VA Flammability rating Closed cell polyester gasket High gasket compression recovery ensures solid seal over life of fixture Knockouts on each end Compatible Linear LED Lamps F32T8/8xx/LED/16W/AC H W VS-CB Stainless Steel Chain Bail (2 needed per fixture, order separately) Ordering Information Model No. of Lamp Positions** Lens (L) Length VSB4A2LT8 2 VSB4A3LT8 3 Impact resistant acrylic lens 51.6 VSB8A4LT *Foreign and domestic components. **Lamps Not Included click image for spec sheet LAMPS NOT INCLUDED 51.6 L Sample Ordering Information VSB4A2LT8 4-Foot LED Ready Vaporproof Strip Impact resistant acrylic lens 2 T8 LED Lamp Positions No Factory Installed Options Standard Disconnect (W) Width (H) Height Page 1 of 2 Rev: 1/25/2019

29 Vaporproof High Bay LED VHL2 Series Applications Entrance Lighting Food Processing Beverage Industry Public Access Parking Structures Pickling and Galvanizing Facilities Car Washes Construction Sites Features High output LEDs provide 80+ CRI L70 is theoretically calculated to be greater than 100,000 hrs Standard: Multi-volt ( V) input Minimum starting temperature: -40 C Suitable for ambient temperature up to 50 C (122 F) UL Listed 5 Year Warranty System Designed, Manufactured, Tested, and Approved in Mendenhall, Mississippi Specification Sheet Installation Shipped fully wired with driver Easy access to wiring compartment and driver via removable gear tray NEC compliant luminaire power disconnect standard Mounting Straps: Standard: Zinc Plated Mounting Straps Optional: 316 Stainless Steel High Strength Mounting Straps introduce the most versatile and dependable mounting options available. Suitable for cable mounts, ceiling mounts, and even dual pendant mounting (FIO: Option V) Mounting Hardware: Standard: Two versatile 316 Stainless Steel V-Hook mounting brackets Optional: Zinc Plated or 316 Stainless Steel Rigid Mounting Beam Optional: 316 Stainless Steel Flexible Ceiling Mount Optional: Wire Hanging Kit Visit for the Qualified Products List LED Product Partner Please review our online resource section on page 3 for more info 29 VHL2 Description VHL2 series vaporproof high bay is engineered for performance down to the smallest detail. It is fully gasketed to provide total protection from dust and moisture penetration. It withstands corrosion, splashing water, hose-directed water, and damage from external ice formation. Benefits Energy saving compared to fluorescent systems Exceptional color rendering Available in multiple color options High system efficacy Long LED life Housing One-piece fiberglass upper body; no seams to crack, break, or leak; is rugged and corrosion resistant Innovative driver heat rail provides stronger backbone for the housing, easier driver mounting, and allows the drivers to operate up to 13 C cooler 5VA Flammability Rating Acetal Copolymer White Plastic Latches (Standard) [See Note 1] 316 Stainless steel hardware for maximum durability (Optional) [See Note 1] Twelve newly designed 3-piece captive latches provide optimal lens retention and will not come off the fixture [See Note 1] White polyethylene molded end plugs for use as knockouts Pressure wash up to 1500 PSI [See Note 2] Gasket Closed cell polyester gasket IPoured gasket seamlessly fills channel for maximum seal Gasket has dry skin that will not stick to the mating surface High gasket compression recovery ensures a solid seal over life of fixture Diffuser Injection molded for maximum strength and precise detail Frosted ends and lineal prisms on sides reduce glare Continuous formed perimeter provides for positive seal Materials: Option A: 100% Virgin Impact Resistant Acrylic Long lasting clarity and resistance to weathering Option F: Frosted lens 100% Impact Resistant Acrylic Option P: UV Stabilized Polycarbonate Maximum impact resistance Notes: (1)If fixtures are to be used in a food processing application where chemicals, high temperature and high (2)All installed fittings must be both of appropriate type and be installed to the manufacture s specifications.not responsible for misapplication of latch selection for vapor proof fixtures. Steel Latches in a food processing application could cause failures with plastic latches. Howard Industries is pressure is used to clean fixtures, we recommend the use of Stainless Steel Latches. Failure to use Stainless Page 1 of 3 Rev: 8/24/2017

30 Ordering Information Model Lens No. of LEDs/ Output Watts Specification Sheet CCT Input Volts Factory Installed Options Cordset Options (discuss with customer service) VHL2 Packing VHL2 F U I VHL2 A: Clear Impact Resistant Acrylic F: Frosted Impact Resistant Acrylic P: Clear UV Stabilized Polycarbonate Sample Ordering Information VHL2F U00000I Vaporproof High Bay LED Frosted Acrylic Lens 576 LEDs, 193 Output Watts 5,000K Color No Factory Installed Options Standard Disconnect Performance Table Model # : 672 LEDs, 195 Watts : 576 LEDs, 193 Watts : 576 LEDs, 162 Watts : 384 LEDs, 130 Watts : 288 LEDs, 82 Watts 40: 4000K 50: 5000K U: V Lumen Output 5000k; 80+ CRI 4000K; 80+ CRI VHL2P : No FIO A: Occ. Sensor B*: Emergency Battery Backup C: Lens Tether Safety Cable M: End Mount Bracket S : Stainless Steel Latches V : Stainless Steel Mounting Strap 00: Standard Disconnect 01: 6, no plug 02: 10, no plug 03: 6, twist lock 120v 04: 10 SJT 18/3 L5-T5 twist lock 120v 05: 6 SJT 18/3 5-T5 non-twist lock 120v 06: 10 SJT 18/3 5-T5 non-twist lock 120v 07: 6 twist lock 277V 08: 10 SJT 18/3 L7-15 twist lock 277V 17: 18/3, no plug spec len Limited availability: 4000K only, not DLC listed If all stainless steel exterior hardware is required, use FIO Order Options S & V. * Not Available with unit. Max. ambient rating with emergency battery pack is 45 C (113 F) for and models. 40 C (104 F) for model, and 35 C (95 F) for model. Scaled Input power (W) Efficacy (lm/w) VHL2A VHL2F I: Single Note: VHL2 comes standard with 12 white plastic latches, 4 zinc-plated mounting straps, and 2 versatile V-hook mounting brackets Optional: Wire Hanging Kit (sold separately) Optional: 316 Stainless Steel Flexible Ceiling Mount (sold separately) Optional: 316 Stainless Steel Rigid Mounting Beam (sold separately) Optional: 316 Stainless Steel Exterior Hardware (Options S & V) VHL2P VHL2A VHL2F VHL2P VHL2A VHL2F VHL2P VHL2A VHL2F VHL2P VHL2A VHL2F Page 2 of 3 Rev: 8/24/2017

31 Specification Sheet VHA LED-Ready Vaporproof LED-Ready Highbay Six Lamp Positions Four Foot Lamps NOT Included Proudly Designed & Assembled IN THE USA* Specifications No ballast installed Includes shunted and non-shunted T8 lamp holder so they are compatible with single-ended and double-ended 4 LED tubes (Type B) Housing One-piece upper body; no seams to crack, break, or leak Reinforced fiberglass body is rugged and corrosion resistant 5VA Flammability Rating Stainless steel hardware for maximum durability Twelve latches for positive lens retention White polyethylene molded end plugs for use as knockouts High gloss, baked enamel reflective front Available 95% Enhanced Specular Aluminum Reflector Pressure wash up to 1500 PSI Gasket Closed cell polyester gasket Poured gasket seamlessly fills channel for maximum seal Gasket has dry skin that will not stick to the mating surface High gasket compression recovery ensures a solid seal over life of fixture Diffuser Injection molded for maximum strength and precise detail Continuous formed perimeter provides for positive seal Materials: 100% Virgin Impact Resistant Acrylic Long lasting clarity and resistance to weathering OR UV Stabilized Polycarbonate Maximum impact resistance Installation Easy access to wiring compartment via removable gear tray Gear tray tethered to housing by two lanyards for extra safety Mounting: Standard: two versatile V-Hook mounting brackets OR Optional: wire hanging kit Ordering Information 31 Model No. of Lamp Positions** Lens (L) Length (W) Width VHA1A6LT8 6 Impact resistant acrylic lens *Foreign and domestic components. **Lamps Not Included Applications Entrance Lighting Car Washes Public Access Parking Structures Compatible Linear LED Lamps F32T8/8xx/LED/16W/AC click image for spec sheet LAMPS NOT INCLUDED Beverage Industry Food Processing Construction Sites Industrial Lighting Description VHA series LED-Ready vaporproof highbay is engineered for performance down to the smallest detail. It is fully gasketed to provide total protection from dust and moisture penetration. It withstands corrosion, splashing water, hose-directed water, damage from external ice formation, and temporary submersion. This rugged fixture operates six lamps and does not contain a ballast. Certifications Guardian IP66 CERTIFIED 1500 PSI (H) Height Page 1 of 1 Rev: 3/12/2018

32 32

33 33

34 LED Shop Light LSL Series Specification Sheet LSL This LED linkable shop light is the ideal one-way solution to fulfill your requirements for efficient lighting in large interior spaces. Designed to provide the best possible lighting while minimizing the trouble and fuss of complicated traditional installation, the LED linkable shop light is ready to get to work the minute you get it out of the package; simply find a power socket, plug it in and it will be ready to light up whenever you need. Features Linkable design: using the plug-in connector, connect up to 8 LSL42340MV units or up to 5 LSL44040MV units. Ideal for use in workshops, utility rooms, and garages. 2400/4000 lm options. Multi-volt operation: VAC Ambient temperature rating: -20 C/-4 F to 40 C/104 F Plug-n-play direct operation: no wiring and routing needed. Suitable for suspended or surface mount. Accessories included in package. Nice choice of general indoor lighting and damp location applicable. Instant-on. No flicker, humming or pausing. Up to 45 years (3hrs/day) operating lifespan. Longlasting, outstanding performance. ETL-listed for excellent quality and safe operation. Eco-friendly: no mercury, UV, infrared or other deleterious radiation. LSL42340MV 4 Foot, 1 Lamp (l) x 2.8 (w) x 1.78 (h) inches LSL44040MV 4 Foot, 2 Lamp (l) x 5.2 (w) x 1.85 (h) inches NOTE: On-Off Pull Chain only available in LSL44040MV model Ordering Information Model Configuration Performance Voltage CCT CRI Dimmable Beam Lifespan 2,400 Lumens LSL42340MV 4 Foot, 1 Lamp 23W V 4000K >80 No ,000H 4,000 Lumens 50/60HZ LSL44040MV 4 Foot, 2 Lamp 40W Page 1 of 2 Rev: 9/26/

35 Specification Sheet LSL Installation Instructions Accessories included: (1) Power Cord, (1) End Connector, (2) Hook Screws, (2) Expansion anchors, (2) Screws, and (2) Hanging Chains. LSL42340MV installation LSL44040MV installation Photometric Data LSL42340MV LSL44040MV Page 2 of 2 Rev: 9/26/

36 Specification Sheet FSR8-LED 8 Fluorescent Strip Channel LED Retrofit Kit Applications Commercial facilities Manufacturing facilities Warehouse applications Retail stores Benefits Energy saving compared to fluorescent systems Exceptional color rendering Available in multiple color options High system efficacy Long LED life No Ballast needed (UL Type B) Internal driver/line voltage lamp Description FSR8-LED series fluorescent strip channel LED retrofit kits are a simple and cost-effective solution to upgrading existing 8 strip fixtures into efficient LED strips. Features Construction Designed for trouble free installation. Uses two (2) 4 gear trays that install independently for easy installation. Lampholder cutouts guarantee correct lampholder spacing and that lampholder will not fall out during install. Code-gauge cold rolled steel. High gloss, baked enamel finish High quality lamp holders NEC compliant luminaire power disconnect standard High output LEDs provide 80+ CRI L70 is predicted to be greater than 50,000 hours Standard: Multi-volt ( V) input Contents: 2 geartrays with prewired lampholders; 8 tek screws; 4 geartray tethers; Type-B LED Lamps UL Listed 5 Year warranty System Designed, Manufactured, Tested, and Approved in Mendenhall, Mississippi Field Installed Options Ordering Model Description FSR8-E Enhanced Specular Aluminum Reflector (95% reflectance) FSR8-A Specular Aluminum Reflector (86% reflectance) FSR8-W White Aluminum Reflector (91% reflectance) Geartray Dimensions Model Length Width FSR84XXXX 4.25 FSR85XXXX 48 (x2) 5.0 FSR8OXXXX Other Ordering Information Model Fixture Length Pan Width 4: 4.25 FSR 8: 96 5*: 5 O*: Other No. of Lamps 2: 2 Lamps 4: 4 Lamps Lamp Characteristics 16: 16 Watt/2,200 Lumens per lamp CCT C: 3500K D: 4000K F: 5000K Sample Ordering Information FSR84416D 8-Foot LED Strip Retrofit 4.25 pan width 4 T8 LED Lamps 4,000K Color * Non-stock item 36 Page 1 of 1 Rev: 2/20/2018

37 Specification Sheet FSR LED-Ready 4 / 8 Fluorescent Strip Retrofit LED-Ready Kit Lamps NOT Included Applications Commercial facilities Manufacturing facilities Warehouse applications Retail stores Proudly Designed & Assembled IN THE USA* Description FSR LED-Ready series fluorescent strip channel LED retrofit kits are a simple and cost-effective solution to upgrading existing 4 and 8 strip fixtures into efficient LED-Ready strips. This fixture uses 2 or 4, line voltage 4 LED lamps (Type B). Features No ballast installed Includes shunted and non-shunted T8 lamp holder so they are compatible with single-ended and double-ended 4 LED tubes (Type B) Construction Designed for trouble free installation. Uses two (2) 4 gear trays that install independently for easy installation (FSR8). Lampholder cutouts guarantee correct lampholder spacing and that lampholder will not fall out during install. Code-gauge cold rolled steel. High gloss, baked enamel finish High quality lamp holders FSR4 contents: 1 geartray with lampholders; 6 tek screws; 2 geartray tethers FSR8 contents: 2 geartrays with lampholders; 8 tek screws; 4 geartray tethers Compatible Linear LED Lamps F32T8/8xx/LED/16W/AC Field Installed Options Ordering Model FSR4-E FSR4-A FSR4-W FSR8-E FSR8-A FSR8-W Description Enhanced Specular Aluminum Reflector (95% reflectance) Specular Aluminum Reflector (86% reflectance) White Aluminum Reflector (91% reflectance) Enhanced Specular Aluminum Reflector (95% reflectance) Specular Aluminum Reflector (86% reflectance) White Aluminum Reflector (91% reflectance) click image for spec sheet LAMPS NOT INCLUDED Ordering Information Model No. of Lamp Positions** (L) Length FSR44-2LT FSR84-2LT8 2 FSR84-4LT8 4 *Foreign and domestic components. **Lamps Not Included 48 (x2) (W) Width 4.25 Sample Ordering Information FSR84-4LT8 8-Foot LED Strip Retrofit 4.25 pan width 4 T8 LED Lamps Positions 37 Page 1 of 1 Rev: 3/12/2018

38 Specification Sheet FSA LED-Ready 4 / 8 LED-Ready Strip Two or Four Lamp Positions Lamps NOT included Proudly Designed & Assembled IN THE USA* Description FSA LED-Ready series of strip fixtures exemplify durability, versatility, functionality, and practicality. This fixture uses 2 or 4, line voltage 4 LED lamps (Type B). W 4.5 Applications Area Lighting Display Cases Shop/Sheds Task Lighting Storage Areas Utility Areas Features No ballast installed Includes shunted and non-shunted T8 lamp holder so they are compatible with single-ended and double-ended 4 LED tubes (Type B) Construction Die-formed code-gauge steel High gloss, baked enamel finish High quality lamp holders Installation Easy access to wiring compartment via removable raceway panel Numerous knockouts on side, back, and ends Flexible mounting options: surface mount, pendant mount, and chain hanging H Compatible Linear LED Lamps F32T8/8xx/LED/16W/AC 2.62 Dimples (4 places) 7/8 Knock Outs (9 places) L Overall length 96 click image for spec sheet LAMPS NOT INCLUDED Ordering Information Model No. of Lamp Positions** (L) Length FSA402LT FSA804LT *Foreign and domestic components. **Lamps Not Included (W) Width (H) Height Sample Ordering Information FSA804LT8 8-Foot LED-Ready Strip 4.5 pan width 4 T8 LED Lamps Positions 38 Page 1 of 2 Rev: 3/12/2018

39 Specification Sheet FSA LED-Ready FSA detail with Hanging Chain and V-clip mounting option. See Field Installed Options table for details. HF-2CV (2 foot) HF-3CV (3 foot) Hanging Chain & V-clips 39 Page 2 of 2 Rev: 3/12/2018

40 LED Flat Panel Ultra-Thin Edge-Lit LED Panel 2X2 Specification Sheet LFP 2X2 Warranty & Listings UL listed for damp locations and insulated ceilings (ICrated) for use in ambient temperatures from -25 C to 50 C (-13 F to 122 F). Complies with RoHS (Restriction on Hazardous Substances) requirements. 5-year warranty of all electronics and housing. Surface Mounting Kit Optional surface mounting kit provides for installation on plaster or other hard ceilings. Description The premium-performance, ultra-thin, edge-lit LED panel series offers industry-leading lumens per watt (LPW). The LFP is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 VDC dimming capability. Features Long-life LEDs Uniform illumination with no visible LED pixilation. Universal AC voltage (50-60Hz) is standard. 0-10VDC dimming capability is standard. Power factor > Total harmonic distortion < 20%. Color rendering index > 80. Aluminum housing. PMMA (polymethyl methacrylate) acrylic lens with light guide panels for optimal light distribution and efficiency. Easy installation in new construction or retrofit. Standard earthquake clips provide secure installation in grid ceilings. Designed for recessed mounting in ceiling grids. Optional surface mounting requires a surface mounting kit (option LFP-SMK22) 2.0 Dimensions Models L (in.) W (in.) H1 (in.) H2 (in.) LFP2240AMV LFP MV Ordering Information Model Watts Lumens Lm/W Voltage Package Quanitity Options 3 Rated Life 4 (L 70 ) LFP2240AMV , V Sold in multiples of 4 160,000 Hours 125 LFP-SMK22 LFP MV ,000 50/60Hz Sold in multiples of 2 80,000 Hours 1 Available in 4000k (neutral white) color temperature only. 2 Where 50 represents CCT (5000K); 30=3000K, 35=3500K, 40=4000K, 50=5000K (call factory for lead times.) 3 Field installed option 4 L 70 hours are IES TM calculated hours. 40 Page 1 of 1 Rev: 5/16/2018

41 LED Flat Panel Ultra-Thin Edge-Lit LED Panel 2X4 Specification Sheet LFP 2X4 Warranty & Listings UL listed for damp locations and insulated ceilings (ICrated) for use in ambient temperatures from -25 C to 50 C (-13 F to 122 F). Complies with RoHS (Restriction on Hazardous Substances) requirements. 5-year warranty of all electronics and housing. Surface Mounting Kit Optional surface mounting kit provides for installation on plaster or other hard ceilings. Description The premium-performance, ultra-thin, edge-lit LED panel series offers industry-leading lumens per watt (LPW). The LFP is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 VDC dimming capability. Features Long-life LEDs Uniform illumination with no visible LED pixilation. Universal AC voltage (50-60Hz) is standard. 0-10VDC dimming capability is standard. Power factor > Total harmonic distortion < 20%. Color rendering index > 80. Aluminum housing. PMMA (polymethyl methacrylate) acrylic lens with light guide panels for optimal light distribution and efficiency. Easy installation in new construction or retrofit. Standard earthquake clips provide secure installation in grid ceilings. Designed for recessed mounting in ceiling grids. Optional surface mounting requires a surface mounting kit (option LFP-SMK24) 2.0 Dimensions W L H2 H1 Models L (in.) W (in.) H1 (in.) H2 (in.) LFP2440AMV LFP MV Ordering Information Model Watts Lumens Lm/W Voltage Package Quanitity Options 3 Rated Life 4 (L 70 ) LFP2440AMV , V 160,000 Hours 125 Sold in multiples of 2 LFP-SMK24 LFP MV ,550 50/60Hz 80,000 Hours 1 Available in 4000k (neutral white) color temperature only. 2 Where 50 represents CCT (5000K); 30=3000K, 35=3500K, 40=4000K, 50=5000K (call factory for lead times.) 3 Field installed option 4 L 70 hours are IES TM calculated hours. 41 Page 1 of 1 Rev: 5/16/2018

42 LED Center Basket Premium Performance Features Long-life LEDs provide 120,000 hours of operation with at least 70% of initial lumen output (L70).* Uniform illumination with no visible LED pixelation. Universal AC voltage (50-60Hz) is standard. 0-10vdc dimming capability is standard. The product can dim to 10%. Power factor > Total harmonic distortion < 20%. Color rendering index > 80. Steel housing and acrylic lens. Easy installation in new construction or retrofit. Fits in standard grid ceilings. Standard earthquake clips provide secure installation in grid ceilings. Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets. * L70 hours are IES TM calculated hours. Specification Sheet Applications Schools LCB Hospitals Stores Description The premium-performance LCB is an LED center basket luminaire, which offers industry-leading lumens per watt (LPW). The LCB is designed as a direct replacement for fluorescent luminaires installed in grid ceilings. It is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability. Warranty and Listings UL listed for damp locations and insulated ceilings (IC-rated) for use in ambient temperatures from -20 C to 50 C (-4 F to 122 F). Complies with RoHS (Restriction on Hazardous Substances) requirements. 5-year warranty of all electronics and housing. Dimensions LCB 2x2 Depth: 3.65 Weight: 8.9 lbs Offices Sample Ordering Information LCB MV 2 x2 25 Watts 4,000K Color Multi-Volt Ordering Information Model Dimensions Performance Efficacy (LPW) LCB MV LCB MV LCB MV 2x2 2x4 Installation Instructions 3,400 Lumens, 25 Watts 3,500 Lumens, 25 Watts 4,590 Lumens, 34 Watts 136 IES Zip File Color Temp. CRI Input Voltage 47.8 Input Current max (A) 120V 240V 277V K > 80 VAC /60 Hz Power Factor LCB 2x4 Depth: 3.65 Weight: 16.3 lbs THD L 70 Hours > 90% < 20% 120, Page 1 of 1 Rev: 10/3/2018

43 Specification Sheet LCS LED Covered Strips 2, 3, 4 & 8 Options Applications Schools Hospitals Offices Stores Description The LCS series is a group of 2, 3, 4, and 8 covered strip lights, which are designed as direct replacements for fluorescent strips. The LCS series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability. Features Available in 5000k (cool white) color temperatures. Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumen output (L70).* Uniform illumination with no visible LED pixelation. Universal AC voltage (50-60Hz) is standard. 0-10vdc dimming capability is standard. Power factor > Total harmonic distortion < 20%. Color rendering index > 80. Steel housing and acrylic lens. Easy installation in new construction or retrofit. Warranty and Listings culus approved for damp locations (-20º C to 50º C / -4º F to 122º F). Complies with FCC Part 15, Class A. Complies with IEEE C , Class A input transient surge protection (2.5kV). Complies with IEC level 2 (4kV) electrostatic discharge (ESD). Complies with RoHS (Restriction on Hazardous Substances) requirements. 5-year warranty of all electronics and housing. Dimensions L W H * L70 hours are IES TM calculated hours. LCS 2-Foot LCS 3-Foot LCS 4-Foot LCS 8-Foot Sample Ordering Information LCS2FT-2050MV 2 Feet Long 20 Watts 5,000K Color Multi-Volt Ordering Information Model Length Wattage Color 2 Input Voltage LCS 1 Non-stock option. Call factory for lead times. 2 Contact factory for other color options. 2FT: 2-Foot 3FT 1 : 3-Foot 4FT: 4-Foot 8FT: 8-Foot Length L (in.) Width W (in.) 3 3/8 3 3/8 3 3/8 3 3/8 Height H (in.) 3 1/2 3 1/2 3 1/2 3 1/2 Weight (lbs.) : (20 Watts) -25: (25 Watts) -32: (32 Watts) -65: (65 Watts) 50: 5000K MV: VAC Page 1 of 2 Rev: 11/7/

44 LED Covered Strips 2, 3, 4 & 8 Options Specification Sheet LCS Electrical Model # Color Temp. CRI 1 Luminaire Lumens Luminaire Watts Lumens Per Watt Input Input Current (A) Power Voltage 2 120V 240V 277V Factor THD 3 L 70 Hours 4 LCS2FT-2050MV 5000K > 80 2, > 90% < 20% 122,000 LCS3FT-2550MV 5000K > 80 3, > 90% < 20% 122,000 LCS4FT-3250MV 5000K > 80 4, > 90% < 20% 122,000 LCS8FT-6550MV 5000K > 80 8, > 90% < 20% 122,000 1 Color Rendering Index. 2 All 50-60Hz. 3 Total Harmonic Distortion. 4 L 70 refers to the number of hours at which lumen output declines to 70% of the initial level. L 70 hours are IES TM calculated hours Photometric Data Model: LCS4FT-3250MV (4,256 lumens) Page 2 of 2 Rev: 11/7/

45 Specification Sheet LWL-LED Series 11/22/2015 LED Work Light LWL Series 5000K; 120V LED Fixture LWL LWL-TP LWL-TP LED Single Head Portable Work Light LED Single Head Tripod Work Light LED Double Head Tripod Work Light Specifications: Energy Saving LED: 22W / 1800 Lumens / 5000K Die-cast aluminum housing and frame Durable polyester powder-coat finish LED reflector with metalized coating 3ft 18 AWG/3C black cord UL Listed Specifications: Energy Saving LED: 22W / 1800 Lumens / 5000K Die-cast aluminum housing and frame Durable polyester powder-coat finish LED reflector with metalized coating 5ft 18 AWG/3C black cord L-14 tripod with extension leg UL Listed Specifications: Energy Saving LED: 22W / 1800 Lumens / 5000K Die-cast aluminum housing and frame Durable polyester powder-coat finish LED reflector with metalized coating 5ft 18 AWG/3C black cord L-14 tripod with extension leg UL Listed Ordering Information: UPC Code Model # # Fixtures Watts Lumens Color Driver Voltage LWL Single (1) 22W K LED 120V 60Hz Models with Tri-pod LWL-TP Single Head (1) 22W K LED 120V 60Hz LWL-TP Twin Head (2) 2x22W 2x K LED 120V 60Hz 45

46 Specification Sheet LWL LED Work Light LWL Suitable for all portable lighting applications for both outdoors and indoors. Ideal for Machinery and car repair, plumbing work, construction sites, rescue projects and much more. Installation Instructions Features LED: 3528x48pcs 36W Input Voltage: 100V/120V/240V Lumen Output: Approx. 3,600 lumens Color Temp: Cool White 1.5KV Surge Protection Long life LED with 50,000H of maintenancefree use Die-cast alluminum housing Heat dissipating fins for optimized thermal management Durable polyester powder-coat finish Tempered glass lens, thermal shock and impact resistant Tool-free, quick head adjustment Foam handle and slip-proof feet on sled base Waterproof on/off switch UL & CUL listed, suitable for wet locations Warranty: 5 years 46 Page 1 of 1 Rev: 11/26/2018

47 Notes 47

48 580 Eastview Drive Laurel, MS P.O. Box 1590 Laurel, MS general fax Revision Revision Date: Date: 10/3/2017 1/25/