AEC-55 Series. Converter : AEC-55. Non-contact displacement measuring system. Specifications. Adopted ordered cables. Features and specifications

Transcription

1 Converter : AEC-55 Adopted converter Adopted cables : PU sensor : PC cable : PCT cable Converter : AEC-55 ( symbolize sensor diameter) See each sensor section. frequency DC to 20kHz -2dB See each sensor section. - C to 55 C Thermal 0.1%/ C of drift between - C and 55 C power supply DC ± V to DC ± 17V, ± 40mA max Adopted ordered cables Optimum miniature converter for installation Able to calibrate and adjust sensitivity with a built-in volume control dial Able to prepare a converter that is designed to protect from interference noise caused when multiple sensors approach each other Able to prepare a specified build-in power supply multi-channel on demand PC-0YY 7 ø2.9 polyethylene cable (5 C MAX) 000 ± 20 PCT-04NYY ø2.4 ( 250 C MAX) 4000 ± 5% Acceptable for use with all kinds and lengths of flexible armoured cables Outline view 55 Converter (option) Insulating bakelite plate (55IP) (2 X) ø4.5 Gap-Senser Model AEC-5505 (2 X) MADE IN JAPAN INPUT 18

2 FUSE Non-contact displacement measuring system Measuring system sensor cable PC-0YY etc oscilloscope sensor Gap-Senser Model AEC-5505 MADE IN JAPAN INPUT data recorder personal computer Model SSPS- DC power55ps etc AC power A/D 55 Converter (option) Power supply outline view Converter rack CB-2E 60 AC 0V ø20retractable cable MADE IN JAPAN Applied Electronic Corporation Built-in power supply converter storage rack AEC-55 PS-8 ON OUT PUT Model 55PS P. L POWER ON DC POWER SPURCE OUT PUT OFF Model AEC-55PS- AEC-55PS-1 AEC-55PS- channel number 1channel channels input output AC0V DC ± 15V, ± 0mA Accessories for Power supply AC ø18 round 2p MC-00 AC0V DC ± 15V, ± 00mA round 2 core cable ø6.5 parallel plug ø channel number 4channels AEC-55 PS-4 6channels AEC-55 PS ± 5% 8channels AEC-55 PS-8 channels AEC-55 PS- ø18 round p MC-01 core cable X 0.sq pressure terminal Y1.25- SC-202A channels 16channels 2channels AEC-55 PS-12 AEC-55 PS-16 AEC-55 PS ± 5% (0) 19

3 Sensor : PU-05 Adopted converters : AEC MS-M 5505HF Adopted cables : PC cable : PCT cable Sensor : PU-05 measuring range (iron) 0 to 2mm ( 0 : 5mm) ± 5V (0.2mm/V) adopted converters µm 55MS-M 0.8µm 5505HF 0.8µm ±0.5%/FS (measuring distance of 0.2 to 1.8mm) - to 180 C ±0.8µm/ C of drift between - and 80 C ±1µm/ C of drift between 80 C and 180 C See p86 about dead zone 0. PU-05 reinforced cover teflon (2 X)nut PU XYZ detection surface ø width between two surfaces 5 High temperature resistance type max:250 C Acceptable for an order of a requested size such as the total length of a sensor (M6 case contained) Acceptable for an order of a requested type of (for example PU ) Acceptable for an order of a thin type sensor as thick as 2mm (a cable connected to lateral side of ) PU XYZ width between two surfaces PU XYZ 15 4 Width between two surfaces 5 ø1.2 5 XYZ in represent cable length, example 401 represents Output / Thermal - 0 C 180 C

4 Sensor : PU-09 Adopted converters : AEC MS-M 5509HF Adopted cables : PC cable : PCT cable measuring range (iron) adopted converters See p86 about dead zone 0. Sensor : PU-09 0 to 4mm ( 0 : 0.2mm) ± 5V (0.4mm/V) MS-M 5509HF 1.0µm 1.6µm 1.6µm ±0.5%/FS (measuring distance of 0.4 to.6mm) - to 1 ±1.6µm/ C of drift between - and 0 C ±1µm/ C of drift between -0 C and 80 C ±1.6µm/ C of drift between 80 C and 1 PU-09 reinforced cover teflon PU XYZ ø9 ø9 width between two surfaces 8 4 width between two surfaces High temperature resistance type max18 C Acceptable for an order of a requested size such as the total length of a sensor (for example PU ) Acceptable for an order of a requested type of a (for example PU ) Acceptable for an order of a thin type sensor as thick as1.1mm (for example PU-09UE#01) PU XYZ PU-09UE#01-XYZ 1.1 ø9 8 aluminium detection surface 9.8 A ø0.7 Y51 XYZ in represent cable length, example 401 represents Output / Thermal - 0 C

5 Sensor : PU-07 Adopted converters : AEC MS-M 5507HF Adopted cables : PC cable : PCT cable measuring range (iron) adopted converter Sensor : PU-07 0 to mm ( 0 : 0.1mm) ± 5V (0.mm/V) MS-M 5507HF 1µm 1.2µm 1.2µm ±0.5%/FS (measuring distance of 0. to 2.7mm) - to 1 ±1.5µm/ C of drift between -and 1 See p86 about dead zone 0. PU-07 reinforced cover teflon M16 X 1 PU XYZ M16 X 1.5 ø2.4 M16 X 1.5 Y5 4 4 width between two surfaces width between two surfaces PU XYZ (2 X)nut High temperature resistance type max:180 C Acceptable for an order of a requested size such as the total length of a sensor (for example PU ) Acceptable for an order of a requested type of (for example PU ) Ready for the shield type sensors (for example PU ) PU XYZ detection surface ± ø Y51 XYZ in represent cable length, example 401 represents Output / Thermal - 0 C

6 Sensor : PU-14 Adopted converters : AEC HF 55MS Adopted cables : PC cable : PCT cable measuring range (iron) adopted converters Sensor : PU-14 0 to 6mm ( 0 : 0.mm) ± 5V (0.6mm/V) 5514 MS 5514HF 2µm 4µm 4µm ±0.5%/FS (measuring distance of 0.6 to 5.4mm) - to 1 ±0µm/ C of drift between - and 1 Contact us if you use MS converter. See p86 about dead zone 0. PU-14 reinforced cover teflon ø ø ø14 4 width between two surfaces 8 15 (4) Acceptable for orders of a requested size such or the total length of a sensor (for example PU-14-0) Acceptable for an order of a requested type of (for example PU ) Acceptable for an order of a sensor with a requested o-ring (for example PU ) ø ± ø ± ø ± ø XYZ in represent cable length, example 401 represents Output / Thermal - 0 C 180 C