E-Star Power Development Co., Ltd. (E-STAR) Phone : Fax :
|
|
|
- Neal Ball
- 5 years ago
- Views:
Transcription
1 E-Star Power Development Co., Ltd. (E-STAR) No.305, Sec. 2, Jhongshan Rd., Banciao City, Taipei County 22067, Taiwan Phone : Fax : /4A Open Frame type Non-Isolation DC to Dc power supply < ESWN02/04W FEATURES 5-24VOUT / 2-4AMP SIP PACKAGE 20-53V,30-53V 100% BURNED IN HIGH EFFICIENCY RoHS COMPLIANT COST EFFECTIVE OPEN FRAME DESIGN 2 YEARS WARRANTY SPECIFICATIONS SPECIFICATIONS Voltage Setpoint Accuracy 1 +/-2% max Input Voltage Range 20~53V,30~53V Ripple & Noise(20MHz BW) Line Regulation 2 5V 100mVp-p max 12V-24V 1%Vp-p max Remote ON/OFF Control Table 1 +/-0.5% max Load Regulation 3 +/-0.5% max Input Filter Type Capacitive Temperature Coefficient Protection +/-0.05%/ C GENERAL SPECIFICATIONS Fuse Recommended Short Circuit Protection Continuous Efficiency 90% min Over Load Protection 120%~220% Typ Switching Frequency 250KHz Typ Isolation voltage Non-isolation Weight ESWN02W-xxSxxRx 7.5 g Typ ESWN04W-xxSxxRx 12.0 g Typ SIP Package ESWN02W-xxSxxRx 50.8mm*13.0mm*10.7mm ENVIRONMENTAL SPECIFICATIONS ESWN04W-xxSxxRx 50.8mm*26.0mm*10.7mm Operating Temperature Ambient 4 Storage Temperature -25 C to +70 C -55 C to +125 C ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD, AND 25 O C UNLESS OTHERWISE NOTED. SELECTION GUIDE(1) 1 The value includes the deviation from output voltage setting point,line and load. 2 High Line to Low Line. 3 Load Regulation is for output load current change from 10% to 100% Load. 4 Refer to the Derating Chart.
2 2Amp SIP PACKAGES Specifications typical at Ta=25 C, nominal input voltage, rated output current unless otherwise specified. MODEL NUMBER CURRENT (A) 5 CURRENT(mA) FULL NO LOAD LOAD EFF (%) 6 PACKAGE ESWN02W-24S A A ESWN02W-24S A A ESWN02W-24S A A ESWN02W-48S A A Note: Other input to output voltages may be available. Please contact factory. Note1. External with input capacitors =22uF/100V (CHEMICON KMF series) Note2. External with output capacitor =100uF/25V (CHEMICON KY series) SELECTION GUIDE(2) 4Amp SIP PACKAGES Specifications typical at Ta=25 C, nominal input voltage, rated output current unless otherwise specified. MODEL NUMBER CURRENT (A) 7 CURRENT(mA) FULL NO LOAD LOAD EFF (%) 8 PACKAGE ESWN04W-24S A B ESWN04W-24S A B ESWN04W-24S A B ESWN04W-48S A B Note: Other input to output voltages may be available. Please contact factory. Note1. External with input capacitors =22uF/100V (CHEMICON KMF series) Note2. External with output capacitor =100uF/25V (CHEMICON KY series) MECHANICAL DIMENSIONS 5 NOMINAL. 6 NOMINAL, FULL LOAD. 7 NOMINAL. 8 NOMINAL, FULL LOAD.
3 ESWN02W-xxSxxRx SERIES PACKAGE "A" All dimensions are in millimeters [inches] NOTE : Pin Size is Tolerance 0.64Φ ±0.10mm All Dimensions In mm(inches) Tolerance.X or.xx= ±0.5mm ESWN04W-xxSxxRx SERIES PACKAGE "B" All dimensions are in millimeters [inches] NOTE : Pin Size is Tolerance 0.64Φ ±0.10mm All Dimensions In mm(inches) Tolerance.X or.xx= ±0.5mm PIN SINGLE 1 +Vout 2 +Vout 3 +Vout 4 +Vout 5 Common 6 Common 7 +Vin 8 +Vin 9 NC 10 NC 11 On/Off Control PIN SINGLE 1 +Vout 2 +Vout 3 +Vout 4 +Vout 5 Common 6 Common 7 +Vin 8 +Vin 9 NC 10 NC 11 On/Off Control RECOMMENDED FOOTPRINT DETAILS ESWN02W-xxSxxRx SERIES PACKAGE "A"
4 ESWN04W-xxSxxRx SERIES PACKAGE "B" Table1 (Remote On/Off Control) Remote On/Off Control Voltage Output Power ON 3.3~12Vdc or open circuit Output Power OFF 0~0.4Vdc or short circuit pin11and 5,6 TECHNICAL NOTES ESWN02W-xxSxx ESWN04W-xxSxx F1 3000mA SLOW-BLOW TYPE 5000mA SLOW-BLOW TYPE L1 SCD uh SCD uh C1 C2 22uF/100V (CHEMICON KMF series) 22uF/100V (CHEMICON KMF series) 22uF/100V (CHEMICON KMF series) 22uF/100V (CHEMICON KMF series) C3 100uF/25V (CHEMICON KY series) 100uF/25V (CHEMICON KY series) Q1 ON/OFF pin open: ON/OFF pin open: Logic High = DC/DC converter On Logic High = DC/DC converter On ON/OFF pin <0.4V: Logic Low = DC/DC converter Off ON/OFF pin <0.4V: Logic Low = DC/DC converter Off
5 DERATING CURVE ESWN02W SERIES ESWN02W-24S05 ESWN02W-24Sxx ESWN02W-48S24 POWER(%) 100% 75% 50% 25% SAFE OPERATING AREA POWER(%) 100% 75% 50% 25% SAFE OPERATING AREA TA(degree C) ESWN04W SERIES ESWN04W-xxSxx TA(degree C) POWER(%) 100% 75% 50% 25% SAFE OPERATING AREA TA(degree C) FUSE SELECTION GUIDE
6 ESWN02W-xxSxxRx SERIES PACKAGE "A" 20V-53V 3000mA Slow-Blow Type Fuse +Vin +Vout DC-DC CONVERTER -Vin Note: Certain applications may require the installation of external fuse in front of the input. -Vout ESWN04W-xxSxxRx SERIES PACKAGE "B" 20V-53V 5000mA Slow-Blow Type Fuse +Vin +Vout DC-DC CONVERTER -Vin Note: Certain applications may require the installation of external fuse in front of the input. -Vout FOR MORE INFORMATION CALL: E-STAR POWER DEVELOPMENT CO., LTD. Tel: Fax: Home Page
LW SERIES 5W WIDE INPUT RANGE
LW SERIES 5W WIDE INPUT RANGE FEATURES 5W DIL PACKAGE INDUSTRY STANDARD PACKAGE NO EXTERNAL COMPONENTS REQUIRED 4.5-9,9-18V,18-36V,36-72V,9-27V,18-54V, 9-36V,18V-72V WIDE INPUTRANGE 100% BURN-IN HIGH EFFICIENCY
DEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
KQWS SERIES 40W WIDE INPUT RANGE
KQWS SERIES 40W WIDE INPUT RANGE FEATURES 40W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-18V,18-36V,36-75V,9-36V,18-75V WIDE INPUT RANGE 100% BURN IN HIGH EFFICIENCY UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS
Voltage Set-point Accuracy +/-2% max. Input Voltage Range 2:1 or 4:1 Input Range. Short Circuit Restart Automatic Efficiency 88% typ.
FEW SERIES 0~0W WIDE RANGE FEATURES 0~0W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-8V,8-V,-7V,9-V,8-7V WIDE RANGE REGULATED UVLO & OVLO HIGH EFFICIENCY UL 9V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE
KHWS SERIES 40W-80W WIDE INPUT RANGE
KHWS SERIES 4W-8W WIDE RANGE FEATURES 4W-8W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9V-18V,18V-V,V-5V WIDE RANGE 1% BURN IN EFFICIENCY UP TO 9% UL 94V- PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE YEARS WARRANTY
PU SERIES 1W UNREGULATED
PU SERIES 1W UNREGULATED FEATURES IN LINE PACKAGE 1W UNREGULATED POWER 100% BURN IN HIGH EFFICIENCY INTERNAL SMD TECHNOLOGY NO HEATSINK REQUIRED UL 94V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS AVAILABLE RoHS
PG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
Series AM2D-RZ 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Models Single output Model Input RoHS Compliant Operating Temperature - o C to +85 o C High Efficiency up to 89% Pin Compatible with Multiple
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
Unit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
RUZ- _/_ Protection (3) Isolation Option (4)
Features Unregulated Converters Description Dual output from a single input rail 1kVDC or 2kVDC input/output basic isolation 1kVDC output/output isolation Power sharing on outputs Optional continuous short
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
Input Voltage Range ±10% Output Voltage Accuracy Line Voltage Regulation RSS, RSS8, RSD, RSD10 1.2%/1% of Vin typ.
END OF LIFE Dec.11 Features Unregulated Converters Selection Guide RoHS 5/6 Conform 1kVDC or3kvdc Isolation Options H version Approved for Medical Applications Suitable for Fully Automated Assembly Optional
Features. Unregulated Converters. 2 Watt SIP7 Single and Dual Output RKZE. RKZE- _/_ Protection (4) Isolation Option (3) Single or Dual
Features Unregulated Converters Low cost 2W converter Industry standard SIP7 package 3kVDC or 4kVDC isolation options Single or dual outputs Short circuit protected (/P versions) EN62368-1 DC/DC Converter
HAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
output Output Voltage min (ma)
SERIES: VBT1-SMT DESCRIPTION: DC-DC CONVERTER date 11/01/2012 page 1 of FEATURES 1 W isolated industry standard 8 pin SMT package dual unregulated s 1,000 V isolation short circuit protection UL safety
Efficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
HAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
Series AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
TRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
HAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
RS5/RD5-R10/RD10. RoHS. 1.0W Regulated Single & Dual Output
1.0W Regulated RS5/RD5-R10/RD10 8 Pin SIL/ 16Pin DIL Package Wide 2:1 Input Range 1000VDC Isolation Up to 3000VDC Isolation Continuous Short Circuit Protection Efficiency up to 77% Operating Temperature
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
HAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
C B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
Features. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
RCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
Series AM2S-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single Model Voltage (V) FEATURES: RoHSCompliant Operating Temperature - to +85 4 Pin SIP Package / Isolation and 3VDC Ultra MiniaturePackage
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
DCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
MPP10-48 S 05 W A - P T Series Name Input Output Output Input Pin Connection Remote On/Off Trim Voltage Quantity Voltage Range Option Options Option
Medical PV Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Railway PART NUMBER STRUCTURE MPP10-48 S 05 W A - P T Name Input Output Output Input Pin Connection Remote On/Off
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
S24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
Series AM1D-Z 1 Watt DC-DC Converter
FEATURES: RoHS compliant High efficiency up to 80% Low profile plastic package 7 pin SIP package Operating temperature -40 o C to + 85 o C Short circuit protection Pin compatible with multiple manufacturers
1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
DH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
NON-ISOLATED DC/DC CONVERTERS 4.5V-32V Input 1.2V-5.0V/3A Output
NONISOLATED DC/DC CONVERTERS Input 1.2V5.0V/3A Output x7ah03h Series NonIsolated Remote On/Off High Input Under Voltage Lockout High Power Density OCP/SCP Excellent Thermal Performance Low Cost Description
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
ISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Danny/ Tim Joyce Research and Development Department Jacky Jack Benny Quality Assurance
Series AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
Sales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 84-251 n/a RB-55S 1W SGL OUTPUT CONVERTER SIL RC 84-2511 n/a RB-512S 1W SGL OUTPUT CONVERTER SIL RC 84-2512 n/a RB-515S 1W SGL OUTPUT CONVERTER SIL RC
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
LANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
Series AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
Load (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
This product is not fuse protected. User is responsible for providing system protection. Consult factory for application information.
Features High output 10A 3.3V ±10%, 5V ±10% Input Regulation ±0.4% line and load Industry standard pin configuration High efficiency to 90% Remote Sense, Trim and Enable Short Circuit protection MTBF 2.9
UL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
MTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
Sixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
LSS-T/10-W12. Adjustable Output 10 Amp SIP-mount DC/DC Converter. PRODUCT OVERVIEW FEATURES
www.murata-ps.com FEATURES Vertical SIP-mount small footprint package Output from 0.6 to 6 Volts up to 51 Watts Ultra-wide 4.5 to 13.8 Vdc input range Outstanding thermal performance and derating Extensive
2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
SELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
Application Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
MEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
Packaging (1) Package
Features Switching Regulator RoHS / conform (% lead free) High reflow temperature SMD package Adjustable output voltage Short circuit protection, thermal shutdown Remote ON/OFF control very low shutdown
Features. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
MEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
SELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
Series AM2D-Z 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to +85 o C Low ripple and noise With derating above +75C (see chart) High efficiency up to 82% Pin compatible with multiple manufacturers
SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
PAF SERIES. Features. Model naming method PAF 500 F / Conformity to RoHS Directive. Applications. Product Line up. DC/DC Module 400W-700W PAF
SERIES DC/DC Module 400W-700W 2 Features Full brick industry standard size (61 12.7 116.8mm) High power density (industry-leading level in 700- F48) Broad range of baseplate operating temperatures: -40
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
Volant NEA/NEF010 Series
Features: Small size, minimal footprint/low profile 10A Output Current (all voltages) High Efficiency: up to 95% High reliability RoHS Compliant Cost efficient open frame design Pre-bias monotonic start-up
OBSOLETE SELECTION GUIDE 1. Recommended alternative: OKY-T/10-W5P-C >> click here to download the data sheet
NNL10 Series FEATURES RoHS compliant Industry standard footprint Short circuit protection High effi ciency Under voltage lock out Output voltage trimming Operating temperature range -40ºC to 85ºC SMD Construction
NXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option
MGJ1 Series 5.7kVDC Isolated 1W SM Gate Drive DC/DC Converters
www.murata-ps.com MGJ1 Series FEATURES Patent pending Optimised bipolar output voltages for IGBT/ SiC & MOSFET gate drives Reinforced insulation to UL69 recognised ANSI/AAMI ES661-1 recognition pending
MEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
DC/DC Converters S1-S/D05 series
DC/DC Converters S1-S/D0 series 0. WATT Single / Dual 1000 Isolation Up to 6000 Isolation Range - 40 C ~ 8 C up to 80 % S1-03R3S0 ±3.3 ±7.7 60 S1-00S0 ± ±0 74 S1-07R2S0 ±7.2 ±34.7 77 S1-009S0 ±9 ±27.7
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/80/80466451.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
NXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
![Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]](/thumbs/77/76098235.jpg "Note1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]")
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
FEATURES. Input Voltage (VDC) 3.3
DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation
16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:
T-HA Series 105 C, 3000 hours Long Life - endurance rating of 3000 hours at 105 C 4 or 5 terminal mounting provides stability and keyed polarity Extended higher CV ratings RoHS Compliant Rated Working