Special Documentation Mechanical accessories for pressure measuring devices

Size: px

Start display at page:

Download "Special Documentation Mechanical accessories for pressure measuring devices"

Carmella Kennedy
5 years ago
Views:

Documentation Mechanical accessories for pressure

oval flange adapters, pressure gauge valves,

shortening kits, adapter test, flushing rings,

contact saves time and cuts cost Endress+Hauser

pressure measurement, ranging from engineering,

accessories to pre-assembled solutions and

Your benefits A single supplier for the transmitter

1 SD1553P//EN/ Products Solutions Services Special Documentation Mechanical accessories for pressure measuring devices Pressure measurement Manifolds, oval flange adapters, pressure gauge valves, shutoff valves, siphons, condensate pots, cable shortening kits, adapter test, flushing rings, block&bleed valves, protective roofs One point of contact saves time and cuts cost Endress+Hauser offers you the complete service portfolio for pressure measurement, ranging from engineering, project management, measuring devices and accessories to pre-assembled solutions and attractive life cycle management. Your benefits A single supplier for the transmitter and accessories ensures that everything is delivered in one shipment and no parts are missing The transmitter and accessories match One central point of contact

2 Table of contents DA63M 2-valve manifold for Cerabar... 3 Use valve manifold, milled, FNPT x FNPT valve manifold, milled, MNPT x FNPT valve manifold, milled, G ½" + adjusting nut... 5 DA63M 3-valve manifold for Deltabar... 6 Use valve, forged, steam applications valve, milled, gas and liquid applications... 8 DA63M 5-valve manifold for Deltabar... 1 Use valve, milled, venting, gas and liquid applications valve, forged, purge valve, steam applications valve HT, forged, purge valve, high-temperature steam applications PZAV: Pressure gauge valves for Cerabar and Ceraphant Use Pressure gauge valve without a test connection Pressure gauge valve with test connectionm2x Combination of shut-off valve or manifold and measuring device... 2 PZO: Oval flange adapter for Deltabar Use Technical data DA61V: shutoff device for pipes Use Installation and commissioning Shutoff assembly with screw-in bonnet Shutoff assembly with integrated bonnet Shutoff assembly with integrated bonnet, hightemperature version Mounting bracket for Deltabar PMD55 and PMD Standard version Heavy-duty version Mounting bracket for Cerabar and Deltapilot Materials Test adapter for Waterpilot and Deltapilot Use Test adapter for level probe with outer diameter 22 mm (.87 in) or 29 mm (1.14 in) Test adapter for level probe with outer diameter 42 mm (1.65 in) Cable shortening kit for Waterpilot and Deltapilot Use Ordering information for Waterpilot Ordering information for Deltapilot Additional accessories Protective roofs Welding flanges and weld-in adapters Flushing rings Overview Technical data Order options... 4 Ordering information Supplementary documentation Field of Activities Field of Activities PZW: Siphons for Cerabar and Ceraphant Overview Siphons - O-shaped U-shaped siphons DA61C: Condensate pot for steam applications Use Design Technical data Mounting bracket for DA63M... 3 Mounting bracket for 2-valve manifold... 3 Mounting bracket for 3- and 5-valve manifold Endress+Hauser

3 DA63M 2-valve manifold for Cerabar Use The manifold is used to connect pressure gauges, pressure transmitters and pressure switches. 2-valve manifold, milled, FNPT x FNPT psi bar NPT ½" NPT ½" NPT ¼" 32 (1.26) 156 (6.14) C B A (3.82) D [ C] [ F] A2816 A B C D Process side (inlet) Transmitter side (outlet) Venting PTFE packing Design and weight Component part Description Process side (inlet) FNPT ½" Transmitter side (outlet) FNPT ½" Air vent NPT ¼" Weight 1 kg (2.21 lb) Materials and application Component part "316L" version 1) Housing Protection cap Locknut Valve body Gland nut Packing 2) PTFE up to +23 C (+446 F) 1) Product Configurator DA63M order code for "Version", option "TB2"; Product Configurator Cerabar order code for "Accessories enclosed" option "P2" or "Accessories mounted" option "N2" 2) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 3

4 2-valve manifold, milled, MNPT x FNPT psi bar FNPT ½" FNPT ½" NPT ¼" 32 (1.26) 156 (6.14) C B A (4.49) D [ C] [ F] A2812 A B C D Process side (inlet) Transmitter side (outlet) Venting PTFE packing Design and weight Component part Description Process side (inlet) MNPT ½" Transmitter side (outlet) FNPT ½" Air vent NPT ¼" Weight 1 kg (2.21 lb) Materials and application Component part "316L" version 1) "Alloy C276" version 2) Housing Protection cap Locknut Valve body Gland nut Packing 3) PTFE up to +23 C (+446 F) 1) Product Configurator DA63M order code for "Version", option "TB2"; Product Configurator Cerabar order code for "Accessories enclosed" option "P2" or "Accessories mounted" option "N2" 2) Product Configurator DA63M order code for "Version", option "TB3"; Product Configurator Cerabar order code for "Accessories enclosed" option "P8" or "Accessories mounted" option "N8" 3) Pay attention to the pressure and temperature limits of the measuring device! 4 Endress+Hauser

5 2-valve manifold, milled, G ½" + adjusting nut psi bar G ½" G ½" NPT ¼" 32 (1.26) 148 (5.83) C B (4.61) A D [ C] [ F] A2817 A B C D Process side (inlet) Transmitter side (outlet) Venting PTFE packing Design and weight Component part Process side (inlet) Transmitter side (outlet) Description ISO228 G½" EN837 G ½" + adjusting nut Air vent NPT ¼" Weight 1 kg (2.21 lb) Materials and application Component part "316L" version 1) "Alloy C276" version 2) Housing Protection cap Locknut Valve body Gland nut Packing 3) PTFE up to +23 C (+446 F) 1) Product Configurator DA63M order code for "Version", option "TB2"; Product Configurator Deltabar order code for "Accessories enclosed" option "P2" or "Accessories mounted" option "N2" 2) Product Configurator DA63M order code for "Version", option "TB3"; Product Configurator Deltabar order code for "Accessories enclosed" option "P8" or "Accessories mounted" option "N8" 3) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 5

6 DA63M 3-valve manifold for Deltabar Use The manifold is used to connect impulse lines to the differential pressure transmitter. 3-valve, forged, steam applications ~145 (5.71) ø63 (2.48) psi bar ~15 (4.13) 54 (2.13) C D [ C] [ F] 72 (2.83) 18 (4.25) 147 (5.79) B 25 (.95) 4 ø12.5 (.49) 41.3 (1.63) 38 (1.5) 25 (.95) ø14 (.55) 2.5 (.1) A 8 (.31) M1 7 (2.76) 22 (.87) 5 (1.97) 41 (1.61) A27677 A Process side B Transmitter side C PTFE packing D Pure graphite packing 1, 2 The transmitter can be disconnected from the impulse lines with valves 1 and 2. 3 Valve 3 is used for zero point compensation between the impulse lines. 4 Cutting ring 5 Weld connection 6 Endress+Hauser

7 Design and weight Description Housing Surface Stem thread Valve seat Valve stem Hand wheels Die-pressed part Phosphatized steel Internal Replaceable Cold-rolled surface, with back seat and non-rotating needle tip Plastic Input Bite ring fitting for tube 12 mm (.47 in), series S, G 3/8 Welding nipples for tube 14 x 2.5 mm Output Mounting Weight IEC61518, Type A 4 screws (L = 55 mm (2-1/8")) and 2 seals Approx. 3.2 kg (7 lb) Materials and application "Steel" version 1) "316Ti" version 2) Housing Housing temperature application limits 1 to +3 C (+14 to +572 F) 4 to +3 C ( 4 to +572 F) Bonnet Valve seat Valve stem Needle tip Packing 3) PTFE: up to +23 C (+446 F) Pure graphite: up to +3 C (+572 F) PTFE: up to +23 C (+446 F) Pure graphite: up to +3 C (+572 F) Union nut Steel Welding nipple Fixing screws Carbon steel ASTM A449, Type ASTM A193 B8 CI.2 Seal PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton: 15 to +12 C (+5 to +248 F) Graphite: 4 to +12 C ( 4 to +248 F) (in accordance with EN61518) 1) Product Configurator, order code for "Version", option "AA1" 2) Product Configurator, order code for "Version", option "AA2" 3) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 7

8 3-valve, milled, gas and liquid applications 217 (8.54) 38 (1.5) 4 psi bar (3.98) M1 C D E 3 (1.18) (2.13) [ C] [ F] B ø16 (4.17) NPT ½" 1 3 A (1.23) A27747 A Process side B Transmitter side C PTFE packing D Pure graphite packing 1.46 E Pure graphite packing , 2 The transmitter can be disconnected from the impulse lines with valves 1 and 2. 3 Valve 3 is used for zero point compensation between the impulse lines. 4 Distance between impulse line inputs. 8 Endress+Hauser

9 Design and weight Component part Surface Stem thread Valve stem Description Phosphatized steel External Cold-rolled surface, with back seat and non-rotating needle tip Input FNPT ½" Output Mounting Weight IEC61518, Type A 4 screws (L = 45 mm (1-3/4")) and 2 seals Approx. 2 kg (4.4 lb) Materials and application Component part "Steel" version 1) "316L" version 2) Housing L (1.444) Housing temperature application limits 1 to +45 C (+14 to +842 F) 4 to +55 C ( 4 to F) Bonnet 316 (1.441) 316 (1.441) Valve stem Needle tip Packing 3) PTFE: up to +23 C (+446 F) Pure graphite: up to +45 C (+842 F) PTFE: up to +23 C (+446 F) Pure graphite: up to +55 C (+1 22 F) Gland nut T-handle Stainless steel Stainless steel Fixing screws Carbon steel ASTM A449, Type ASTM A193 B8 CI.2 Seal PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton: 15 to +12 C (+5 to +248 F) Graphite: 4 to +12 C ( 4 to +248 F) (in accordance with EN61518) 1) Product Configurator DA63M order code for "Version", option "AB1" 2) Product Configurator DA63M order code for "Version", option "AB2"; Product Configurator Deltabar order code for "Accessories enclosed" option "P3" or "Accessories mounted" option "N3 3) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 9

10 DA63M 5-valve manifold for Deltabar Use The manifold is used for differential pressure transmitter installation or zero point adjustment and to shut off the impulse line. 5-valve, milled, venting, gas and liquid applications psi bar (4.13) ~289 (11.4) 7 M1 54 (2.13) 3 (1.18) D E F [ C] [ F] NPT ¼" B 115 (4.53) 6 NPT ½" C A C 31.2 (1.23) A27748 A Process side B Transmitter side C Venting D PTFE packing E Pure graphite packing 1.46 F Pure graphite packing , 2 The transmitter can be disconnected from the impulse lines with valves 1 and 2. 3 Valve 3 is used for zero point compensation between the impulse lines. 4, 5 The impulse lines can be vented or blown clear with valves 4 and 5. 6 Vent connection NPT ½", female 7 Distance between impulse line inputs. 1 Endress+Hauser

11 Design and weight Description Surface Stem thread Valve stem Phosphatized steel External Cold-rolled surface, with back seat and non-rotating needle tip Input FNPT ½" Output Mounting Weight Vent connection IEC 61518, Type A 4 screws (L = 45 mm (1-3/4")) and 2 seals Approx. 3.3 kg (7.3 lb) NPT ½" female Materials and application "Steel" version 1) "316L" version 2) Housing L (1.441) Housing temperature application limits 1 to +55 C (+14 to F) 4 to +55 C ( 4 to F) Bonnet 316 (1.441) 316 (1.441) Valve stem Needle tip Packing 3) PTFE: up to +23 C (+446 F) Pure graphite: up to +45 C (+842 F) PTFE: up to +23 C (+446 F) Pure graphite: up to +55 C (+1 22 F) Gland nut T-handle Stainless steel Stainless steel Screw plug Fixing screws Carbon steel ASTM A449, Type ASTM A193 B8 CI.2 Seal PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton: 15 to +12 C (+5 to +248 F) Graphite: 4 to +12 C ( 4 to +248 F) (in accordance with EN61518) 1) Product Configurator DA63M order code for "Version", option "BB1" 2) Product Configurator DA63M order code for "Version", option "BB2"; Product Configurator Deltabar order code for "Accessories enclosed" option "P5" or "Accessories mounted" option "N5" 3) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 11

12 5-valve, forged, purge valve, steam applications 7 psi bar (2.1) (2.83) 18 (4.25) 175 (6.89) 252 (9.92) 8 54 (2.13) D E B [ C] [ F] 25 (.98) 41.3 (1.63) ø12.5 (.49) 6 8 (.31) 38 (1.5) 5 (1.97) 25 (.95) ø14 (.55) 2.5 (.1) 7 C A 5 C M1 5 (1.97) 22 (.87) 41 (1.61) A27749 A Process side B Transmitter side C Blow clear D PTFE packing E Pure graphite packing 1, 2 The transmitter can be disconnected from the impulse lines with valves 1 and 2. 3 Valve 3 is used for zero point compensation between the impulse lines. 4, 5 The impulse lines can be vented or blown clear with valves 4 and 5. 6 Bite ring fitting 7 Weld connection 8 Distance between impulse line inputs. 12 Endress+Hauser

13 Design and weight Description Housing Surface Stem thread Valve seat Valve stem Die-pressed part Phosphatized steel Internal Replaceable Cold-rolled surface, with back seat and non-rotating needle tip Inlet/blow clear Bite ring fitting for tube 12 mm (.47 in), series S, G 3/8 Welding nipples for tube 14 x 2.5 mm Output Mounting Weight IEC 61518, Type A 4 screws (L = 55 mm (2-1/8")) and 2 seals Approx. 4.6 kg (1.2 lb) Materials and application "Steel" version 1) "316Ti" version 2) Housing Housing temperature application limits 1 to +3 C (+14 to +572 F) 4 to +3 C ( 4 to +572 F) Bonnet Valve seat Valve stem Needle tip Packing 3) PTFE: up to +23 C (+446 F) Pure graphite: up to +3 C (+572 F) PTFE: up to +23 C (+446 F) Pure graphite: up to +3 C (+572 F) Union nut Steel Fixing screws Carbon steel ASTM A449, Type ASTM A193 B8 CI.2 Seal PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton: 15 to +12 C (+5 to +248 F) Graphite: 4 to +12 C ( 4 to +248 F) (in accordance with EN61518) 1) Product Configurator, order code for "Version", option "CA1" 2) Product Configurator, order code for "Version", option "CA2" 3) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 13

14 5-valve HT, forged, purge valve, high-temperature steam applications 12.5 (.49) 41.3 (1.63) (.85) 43 (1.69) 142 (5.59) psi bar M1 54 (2.13) 72 (9.6) 8 (.31) D 5 (.2) D E [ C] [ F] B 17 (6.69) 23 (9.6) 11 (.43) 3 (1.18) 22 (.87) 41 (1.61) 5 (1.97) L C A 5 C A2775 A Process side B Transmitter side C Purge valve D PTFE packing E Pure graphite packing 1, 2 The transmitter can be disconnected from the impulse lines with valves 1 and 2. 3 Valve 3 is used for zero point compensation between the impulse lines. 4, 5 The impulse lines can be vented or blown clear with valves 4 and 5. 6 Distance between impulse line inputs. 14 Endress+Hauser

15 Design and weight Description Housing Surface Manifold, stem thread Purge valves Valve seat Valve stem Input Outlet, manifold Outlet, purge valve Mounting Weight Die-pressed part Phosphatized steel Internal External stem thread Replaceable Cold-rolled surface, with back seat and non-rotating needle tip Butt weld connection for tube 14 x 2.5 mm IEC 61518, Type A Bite ring fitting for tube 14 mm (.55 in), series S 4 screws (L = 55 mm (2-1/8")) and 2 seals Approx. 5.6 kg (12.4 lb) Materials and application "Steel" version 1) "316Ti" version 2) Valve block Purge valve Valve block Purge valve Housing Housing temperature application limits 1 to +2 C (+14 to +392 F) 1 to +55 C (+14 to F) 4 to +2 C ( 4 to +392 F) 4 to +55 C ( 4 to F) Bonnet Valve seat Valve stem Needle tip Packing 3) PTFE: to +23 C (+446 F) Pure graphite: +55 C (+1 22 F) PTFE: to +23 C (+446 F) Pure graphite: +55 C (+1 22 F) Union nut Steel Gland nut Fixing screws Carbon steel ASTM A449, Type ASTM A193 B8 CI.2 Seal PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton: 15 to +12 C (+5 to +248 F) Graphite: 4 to +12 C ( 4 to +248 F) (in accordance with EN61518) 1) Product Configurator, order code for "Version", option "DA1" 2) Product Configurator, order code for "Version", option "DA2" 3) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 15

16 PZAV: Pressure gauge valves for Cerabar and Ceraphant Use Suitable for shutting off the impulse lines and for mounting pressure transmitters with ISO228 G ½" DIN1627 or MNPT ½" threads. Simple shutoff valves do not have a vent screw. Pressure gauge valve without a test connection A G ½" B G ½" (.79) 2 (.79) C 27 G ½" G ½" Ø (3.11) 5 (1.97) 5 (1.97) 125 (4.92) 1 (3.94) psi bar 58 4 D 14 (.55) 27 M2 x (3.11) NPT ½" NPT ½" (1.97) 125 (4.92) 5 (1.97) 15 (4.13) [ C] [ F] A Endress+Hauser

17 Design Item Input Outlet (to measuring device) Option A ISO228 G ½" EN837 G ½" female, adjusting nut 1 1) A 2) B Ermeto 12S G ½" female, adjusting nut 1 1) B 2) C Weld connection G ½" female, adjusting nut 1 1) C 2) D MNPT ½" FNPT ½", internal 1 1) D 2) 1) Product Configurator, order code for "Valve" 2) Product Configurator, order code for "Process connection (outlet x inlet)" Technical data "Steel" version 1) 2) 3) 2) "316Ti" version Housing Valve stem Needle tip Packing 4) PTFE up to +23 C (+446 F) PTFE up to +23 C (+446 F) Input Output Vent screw A4 (316) A4 (316) Hand wheel Plastic Plastic 3.1 Certificate PZAV-B PZAV-B 1) Product Configurator, order code for "Valve body; seal", option "1" 2) Cerabar M: Product Configurator, order code for "Accessories enclosed", option "P2" 3) Product Configurator, order code for "Valve body; seal", option "2" 4) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 17

18 Pressure gauge valve with test connectionm2x1.5 A 89 (3.5) 85 (3.35) 89 (3.5) 85 (3.35) B 27 G ½" NPT ½" (2.13) 1 (3.94) (4.17) 2 (.79) G ½" 13 (.51) NPT ½" -14 C 89 (3.5) 85 (3.35) G ½" D 89 (3.5) 85 (3.35) G ½" (2.13) 125 (4.92) (2.13) 125 (4.92) 2 (.79) Ø14 psi bar 58 4 ø12 (.47) [ C] [ F] A Endress+Hauser

19 Design Item Input Outlet (to measuring device) Option A ISO228 G ½" EN837 G ½" female, adjusting nut 2 1) A 2) B Ermeto 12S G ½" female, adjusting nut 2 1) B 2) C Weld connection 14x2.5 G ½" female, adjusting nut 2 1) C 2) D MNPT ½" FNPT ½", internal 2 1) D 2) 1) Product Configurator, order code for "Valve" 2) Product Configurator, order code for "Process connection (outlet x inlet)" Technical data "Steel" version 1) 2) "316Ti" version 3) Housing Valve stem Needle tip Packing 4) PTFE up to +23 C (+446 F) PTFE up to +23 C (+446 F) Input Output Vent screw Hand wheel Plastic Plastic 3.1 Certificate PZAV-B PZAV-B 1) Product Configurator, order code for "Valve body; seal", option "1" 2) Cerabar M: Product Configurator, order code for "Accessories enclosed", option "P2" 3) Product Configurator, order code for "Valve body; seal", option "2" 4) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 19

20 Combination of shut-off valve or manifold and measuring device The possible combinations of manifold or valve and measuring device are described in the following table: Version 2-valve 3-valve 5-valve Process connection on valve manifold or shut-off valve for measuring device 1/2 FNPT ISO228 G½ EN837 IEC61518 Shut-off valve order code PZAV-##D# PZAV-##A# PZAV-##B# PZAV-##C# - Manifold order code DA63M-TB#BFG DA63M-TB#BGG DA63M-TB2BHH DA63M-A##### DA63M-B##### DA63M-C##### DA63M-D##### DA63M-K##### DA63M-L##### Can be combined with the following process connections (Product Configurator, oder code for "Process connection") Deltabar S PMD75 Deltabar M PMD55 Cerabar S PMP71 Cerabar S PMC All NPT1/4-18 IEC61518 process connections RA, RB, RC, RD, RE, RF GA, GB - - Cerabar S PMP75 UB, UD UA, UC Cerabar M PMP51 Cerabar M PMC51 RKJ, RKC, RLJ, RLC, RJF GCJ, GCC, GCF - - Cerabar M PMP55 UCJ, UEJ UBJ, UDJ Cerabar PMP11/21 Cerabar PMC11/21 Deltabar FMD71 Deltabar FMD72 VWJ, VXJ WBJ - - RKJ, RKC, RLJ, RLC, RJF GCJ, GCC, GCF Endress+Hauser

21 PZO: Oval flange adapter for Deltabar 12 (.47) 41.3 (1.63) A2794 Use The oval flange adapter is used to connect the impulse lines to the oval flange process connection of the differential pressure transmitter (IEC 61518). Technical data "Steel" version 1) 2) 3) 2) "316L" version Process connection 4) 5) Seal Fixing 6) 7) screw Additional options FNPT ½"-14 / JIS RC ¼" PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton 2x fixing screw M1 2x fixing screw UNF 7/16-2 Cleaned of oil+grease (oxygen use) FNPT ½"-14 PTFE: 1 to +8 C (+14 to +176 F) (in accordance with EN61518) FKM Viton 2x fixing screw M1 2x fixing screw UNF 7/16-2 Cleaned of oil+grease (oxygen use) EN certificate 1) Product Configurator, order code for "Material", option "2" 2) Deltabar M: Product Configurator, order code for "Accessories enclosed", option "P1" 3) Product Configurator, order code for "Material", option "1" 4) Alternative models (e.g. kidney flange), materials and seals available 5) Pay attention to the pressure and temperature limits of the measuring device! 6) Fixing screws are optional 7) Material: ASTM A449 Type 1, electrogalvanized Endress+Hauser 21

22 DA61V: shutoff device for pipes Use Installation and commissioning Suitable for shutting off the impulse lines (e.g. for Deltatop flow applications). The shutoff valve is designed to separate the measuring system from the measuring tube if leaks are discovered or if maintenance work needs to be performed on the impulse lines. The shutoff valves must be closed on completion of the installation. As part of routine commissioning, the shutoff valves must first be opened carefully and the integrity of the entire system checked to ensure it is leak-tight. Shutoff assembly with screwin bonnet A ø63 (2.48) psi bar (3.19) 64 (2.52) ø12 (.47) M2x B C [ C] [ F] A27977 A B C Inlet cutting ring; outlet cutting ring PTFE packing Pure graphite packing Technical data "C22.8" version 1) "316Ti" version 2) Housing Valve stem Needle tip Packing 3) PTFE up to +23 C (+446 F) Pure graphite up to +3 C (+572 F) PTFE up to +23 C (+446 F) Pure graphite up to +3 C (+572 F) Union nut Steel Certificate 4) 3.1 Certificate 3.1 Certificate Weight.47 kg (1.4 lb).47 kg (1.4 lb) 1) Product Configurator, order code for "Material", option "C" 2) Product Configurator, order code for "Material", option "D" 3) Pay attention to the pressure and temperature limits of the measuring device! 4) Product Configurator, order code for "Additional options", option "F1" 22 Endress+Hauser

23 Shutoff assembly with integrated bonnet A ø8 (3.15) ø8 (3.15) B 95 (3.74) NPT ½" 95 (3.74) ø12 (.47) M2x (.54) 9 (3.54) G ½" 22 (.87) 9 (3.54) C ø8 (3.15) psi bar (3.74) 21.3 (.84) 12.2 (.48) 9 (3.54) ø12 (.47) M2x D E [ C] [ F] A2797 A Inlet FNPT ½"; outlet FNPT ½" B Inlet nipple DIN 1927 and threaded flanges; outlet cutting ring C Inlet weld connection; outlet cutting ring D PTFE packing E Pure graphite packing Endress+Hauser 23

24 Technical data "C22.8" version 1) "316Ti" version 2) Housing Bonnet Valve seat / Valve stem / Needle tip Packing 3) PTFE up to +2 C (+392 F) Pure graphite up to +3 C (+572 F) PTFE up to +23 C (+446 F) Pure graphite up to +3 C (+572 F) Union nut Steel Certificate 4) Weight 3.1 Certificate A 5) :.8 kg (1.76 lb) B 6) : 1.45 kg (3.2 lb) C 7) :.73 kg (1.61 lb) 1) Product Configurator, order code for "Material", option "C" 2) Product Configurator, order code for "Material", option "D" 3) Pay attention to the pressure and temperature limits of the measuring device! 4) Product Configurator, order code for "Additional options", option "F1" 5) Product Configurator, order code for "Inlet", option "C" and order code for "Outlet", option "C" 6) Product Configurator, order code for "Inlet", option "V" and order code for "Inlet", option "W" 7) Product Configurator, order code for "Inlet", option "E" and order code for "Inlet", option "K" 24 Endress+Hauser

25 Shutoff assembly with integrated bonnet, hightemperature version ø12 (4.72) psi bar A 14.9 (.59) 5 (.2) 5 (.2) 65 (2.56) 13 (5.12) 9 (.35) 14 (.55) 14 (5.51) B [ C] [ F] A28332 A B Weld connection, inlet 21.3 mm (.84 in) or 17.2 mm (.68 in); weld connection, outlet 14 mm (.55 in) Pure graphite packing Technical data "16Mo3" version 1) Housing Bonnet Valve seat Valve stem Needle tip Packing 2) Union nut Certificate 3) Weight Pure graphite: up to +53 C (+986 F) Steel 3.1 Certificate 1.6 kg (3.53 lb) 1) Product Configurator, order code for "Material", option "G" 2) Pay attention to the pressure and temperature limits of the measuring device! 3) Product Configurator, order code for "Additional options", option "F1" Endress+Hauser 25

26 PZW: Siphons for Cerabar and Ceraphant Overview A B psi bar [ C] [ F] A28335 A B O-shaped siphon. Suitable for vertical installation. U-shaped siphon. Suitable for horizontal installation. Use Siphons according to DIN are used to cool the medium. Suitable for liquids, gases and vapors. Function The pressure transmitter is separated from the process by the O-shaped pipe (vertical installation) or the U-shaped pipe (horizontal installation). In the event of damp gases and vapor, condensate also forms, causing an additional temperature reduction in relation to the process. Pressure measurement in vapors Use siphons for pressure measurement in vapors. The siphon reduces the temperature to almost ambient temperature. Fill the siphon with liquid before commissioning. Preferably mount the device with the siphon below the tapping point. Advantages: defined water column only causes minimal/negligible measured errors only minimal/negligible thermal effects on the device Mounting above the tapping point is also possible. Note the max. permitted ambient temperature of the device! Cooling effect The cooling effect depends on the pressure, medium and ambient temperature. Average cooling effect for gases: 5 to 1 C (122 to 212 F) 26 Endress+Hauser

27 Siphons - O-shaped G ½" 275 (1.8) 13 (5.12) 95 (3.74) 11 (4.33) ø56 (2.2) 27 NPT ½" G ½" A2411 Technical data "St35.8" version 1) 2) 3) 2) "316Ti" Version Process connection 4) FNPT ½" x MNPT ½" FNPT ½" x weld connection G ½" internal x G ½" G ½" internal x weld connection Pipe ST Ti Maximum operating pressure upstream from siphon (process side) at maximum operating temperature 5) 14 bar (1 58 psi) at 4 C (752 F) 12 bar (1 74 psi) at 3 C (572 F) 16 bar (2 32 psi) at 12 C (248 F) Additional options Basic model Basic model EN certificate 1) Product Configurator, order code for "Pressure tapping", option "2" and order code for "Pipe; seal", option "1" 2) Cerabar M: Product Configurator, order code for "Accessories enclosed", option "P4". 3) Product Configurator, order code for "Pressure tapping", option "2" and order code for "Pipe; seal", option "2" 4) Additional process connections available 5) Pay attention to the pressure and temperature limits of the measuring device! Endress+Hauser 27

28 U-shaped siphons G ½" ø2 (.79) 27 NPT ½" 145 (5.71) ø56 (2.2) A2412 Technical data "St35.8" version 1) 2) 3) 2) "316Ti" Version Process connection 4) FNPT ½" x MNPT ½" FNPT ½" x weld connection G ½" internal x G ½" G ½" internal x weld connection Pipe ST Ti Maximum operating pressure upstream from siphon (process side) at maximum operating temperature 5) 14 bar (1 58 psi) at 4 C (752 F) 12 bar (1 74 psi) at 3 C (572 F) 16 bar (2 32 psi) at 12 C (248 F) Additional options Basic model Basic model EN certificate 1) Product Configurator, order code for "Pressure tapping", option "1" and order code for "Pipe; seal", option "1" 2) Cerabar M: Product Configurator, order code for "Accessories enclosed", option "P4". 3) Product Configurator, order code for "Pressure tapping", option "1" and order code for "Pipe; seal", option "2" 4) Additional process connections available 5) Pay attention to the pressure and temperature limits of the measuring device! 28 Endress+Hauser

29 DA61C: Condensate pot for steam applications G ½" ~95 (3.74) ~11 (4.33) ~95 (3.74) ~11 (4.33) 22 (.87) 14 (.55) ø89 (3.5) ~4 (1.57) ø89 (3.5) ~4 (1.57) ø7 (2.76) ø5 (1.97) ~95 (3.74) ~95 (3.74) 3 3 A Filling cap, NPT ½ (optional) 2 From the primary device 3 To the differential pressure transmitter Use Design For flow and level measurement applications in order to maintain constant conditions in the condensate columns. Excess condensate can flow back into the main pipe or vessel. Hot-pressed hemispherical heads welded together. Technical data "HII (265 GH)" version 1) "316L" version 2) "16Mo3" version 3) Weight 1.7 kg (3.8 lb) 1.7 kg (3.8 lb) 2.2 kg (4.9 lb) Volume 3 cm 3 3 cm 3 25 cm 3 Pressure, temperature 4) PN 1, 3 C (572 F) PN 1, 4 C (752 F) PN 25, 5 C (932 F) Filling cap NPT ½" Inlet Weld connection 21.3 mm (.84 in) Nipple, weld connection 17.2 mm (.68 in) G ½" DIN 1927 steel G ½" DIN 1927 stainless steel Outlet Certificate 3.1 Certificate 5) Weld connection 21.3 mm (.84 in) Nipple, 12 mm (.47 in) Nipple G ½" DIN ) Product Configurator, order code for "Material; volume; PN", option "B" 2) Product Configurator, order code for "Material; volume; PN", option "C" 3) Product Configurator, order code for "Material; volume; PN", option "K" 4) Pay attention to the pressure and temperature limits of the measuring device! 5) Product Configurator, order code for "Additional options", option "F1" Endress+Hauser 29

30 Mounting bracket for DA63M If the transmitter is mounted on a shutoff device (e.g. manifold or shutoff valve), it is recommended to use the bracket provided. This makes it easier to disassemble the transmitter. Alternatively, the transmitter can be mounted directly via a mounting bracket ( 32). Mounting bracket for 2-valve manifold A367 Ordering information: Product structure for DA63M, Product Configurator, order code for "Additional options", option "EC". The mounting bracket set contains: 1 mounting bracket 1 U-bolt 2 Allen screws ISO M6x1 1 U-fixing bracket M8 for 2" pipe 2 washers 8.4 DIN 125-B 2 hexagonal nuts DIN EN 2432-M8 3 Endress+Hauser

31 Mounting bracket for 3- and 5-valve manifold If the transmitter is mounted on a shutoff device (e.g. manifold or shutoff valve), it is recommended to use the bracket provided. This makes it easier to disassemble the transmitter. 55 (2.17) 72 (2.83) 85 (3.35) 72 (2.83) 3 (1.18) 72 (2.83) A28158 The mounting bracket set contains: 1 mounting bracket 2 "U" bolts 4 washers hexagonal nuts M8 2 washers hexagonal-headed bolts M1x14 2 hexagonal-headed bolts 3/8-16 UNC x 5/8" Ordering information: Product structure for DA63M, Product Configurator, order code for "Additional options", option "EA" or "EB". Endress+Hauser 31

32 Mounting bracket for Deltabar PMD55 and PMD75 Standard version Mounting bracket for wall and pipe mounting including retaining bracket for pipe mounting and two nuts. 116 (4.57) 125 (4.92) 12 (4.72) ø12 (.47) 74 (2.91) 38 (1.5) 54 (2.13) 41.3 (1.63) 41.3 (1.63) 54 (2.13) 74 (2.91) A27981 Materials and ordering information Component part Material Order option 1) Order number Mounting bracket 316L (1.444) PD - Mounting kit 7/16 UNF (Deltabar M and Deltabar S): A4-7 M12 (Deltabar S): A2-7 M1 (Deltabar M and Deltabar S): A On request On request Adapter plate for PMD55 34 PC - Screws 7/16 UNF: A2-7 M1: A /16 UNF: M1: ) Product Configurator, order code for "Accessories enclosed" 32 Endress+Hauser

33 Heavy-duty version Mounting bracket for wall and pipe mounting including retaining bracket for pipe mounting and two nuts. 16 (4.17) 135 (5.31) 124 (4.88) ø12 (.47) 74 (2.91) 38 (1.5) 54 (2.13) 41.3 (1.63) 41.3 (1.63) 54 (2.13) 74 (2.91) A28156 Materials and ordering information Component part Material Order option 1) Order number Mounting bracket 316L (1.444) PB - Mounting kit 7/16 UNF (Deltabar M and Deltabar S): A4-7 M12 (Deltabar S): A2-7 M1 (Deltabar M and Deltabar S): A /16 UNF screws: M12 screws: M1 screws: Adapter plate for PMD55 316L PC - Adapter plate 7/16 UNF: A4-7 M1: A /16 UNF: M1: ) Product Configurator, order code for "Accessories enclosed" Endress+Hauser 33

34 Mounting bracket for Cerabar and Deltapilot ø ( ) 7 (2.76) 86 (3.39) 52 (2.5) ø6 (.24) 122 (4.8) 158 (6.22) 14 (5.51) 175 (6.89) A28493 Ordering information: Product Configurator, order code for "Accessories enclosed", option "PA" Materials Component part Material Order number Mounting bracket 316L (1.444) Endress+Hauser

35 Test adapter for Waterpilot and Deltapilot Use Test adapter for level probe with outer diameter 22 mm (.87 in) or 29 mm (1.14 in) Test adapter for level probe for functional testing or calibration under pressure. ~25 (.98) M14x1 1 ~33 (1.3) Level probe connection 2 Compressed air hose connection, internal diameter, quick coupling piece 4 mm (.16 in) 12 2 A18749 Observe the maximum pressure for compressed air hose and maximum overload for level probe Maximum pressure for the quick coupling piece provided: 1 bar (145 psi) Adapter material: 34 (1.431) Material of quick coupling piece: anodized aluminum Order number Test adapter for level probe with outer diameter 42 mm (1.65 in) ø8 (3.15) 153 (6.2) (3.74) 2 ø5 (1.97) A Level probe connection 2 Compressed air hose connection Observe the maximum pressure for compressed air hose and maximum overload for level probe Maximum pressure for the quick coupling piece provided: 1 bar (145 psi) Adapter material: 34 (1.431) Material of quick coupling piece: anodized aluminum Order number Endress+Hauser 35

36 Cable shortening kit for Waterpilot and Deltapilot Use Ordering information for Waterpilot The cable shortening kit is used to shorten a cable easily and professionally. Order number: Ordering information: Product Configurator, order code for "Accessories enclosed" option "PW" Associated documentation SD552P//A6. The cable shortening kit is not designed for the FMX21 with FM/CSA approval. Ordering information for Deltapilot Order number: Ordering information: Product Configurator, order code for "Accessories enclosed" option "PW" Associated documentation SD553P//A6. 36 Endress+Hauser

37 Additional accessories Protective roofs Use To protect the transmitter from direct sunshine, precipitation and ice. Protective roof, 316L 135 (5.31) 123 (4.84) 122 (4.8) 24 (9.45) ø8 (3.15) 7 (2.76) 7 (2.76),5 (.2) 18 (.71) 95 (3.74) 117 (4.61) 22 (7.95) 5 (1.97) A289 Protective roof for Cerabar S, Deltabar S and Deltapilot S transmitters with T14 aluminum housing and display. Including bracket for direct installation on the transmitter housing. Protective roofs are also available for Cerabar M with F31 and F15 housing. Technical data Material Protective roof Weight Clamp screw Retainer 316L.48 kg (1.6 lb) A4 316L Endress+Hauser offers protective roofs as Technical Special Products (TSP). For further information please contact your local Endress+Hauser Sales Center. Endress+Hauser 37

38 Protective roof, PVC 125 (4.92) 12 (4.72) 124 (4.88) 15 (4.13) 4 (.16) 34 (1.34) A281 Protective roof for Cerabar S, Deltabar S and Deltapilot S transmitters with T14 aluminum housing and display. Technical data Material Protective roof PVC (4 mm (.16 in)) Endress+Hauser offers protective roofs as Technical Special Products (TSP). For further information please contact your local Endress+Hauser Sales Center. Welding flanges and weld-in adapters For details refer to TI426F// "Weld-in adapters, process adapters and flanges". 38 Endress+Hauser

39 Flushing rings Use flushing rings if there is a risk of medium buildup or clogging at the process connection. The flushing ring is fitted between the process connection and the process connection provided by the customer. Using the two lateral flushing holes, medium buildup or clogging in front of the process isolating diaphragm can be rinsed away and the pressure chamber vented. Various nominal widths and forms allow adaption to the respective process flange. Overview A Flushing ring 2 Flushing hole 3 Locking screws 1/2 NPT (use suitable sealing material!) 4 Process connection provided by customer 5 Seals 6 Process connection of measuring device Technical data b d 1 d 2 A34648 Material Nominal diameter Nominal pressure 1) d 1 d 2 b Rinse connection 2) Weight EN192-1 [mm] [mm] [mm] 2 x thread 3) [kg (lb)] DN25 PN ASME FNPT 1/2.72 kg (1.59 lb) DN5 PN kg (2.73 lb) AISI 316L DN8 PN kg (4.32 lb) ASME B16.5 [in] [in] [in] NPS 1" Class kg (1.23 lb) NPS 2" Class kg (2.21 lb) NPS 3" Class kg (3.44 lb) 1) The specified nominal pressure applies to the flushing ring. The maximum pressure for the measuring device is dependent on the lowest-rated element, with regard to pressure, of the selected components. 2) including 2 locking screws 316L 3) Use suitable sealing material! Endress+Hauser 39

40 Order options Flushing rings can be ordered as a separate accessory or as an order option for the device. Material Nominal diameter Approval 1) Accessory 2) Part number 3) 4) Order option Cerabar Deltabar PMP55 PMP75 FMD77 FMD78 5) EN192-1 DN PO PO - - DN PP PP PP PP AISI 316L DN PQ PQ PQ PQ ASME B16.5 NPS 1" PK PK - - NPS 2" CRN PL PL PL PL NPS 3" CRN PM PM PM PM 1) CSA approval: Product Configurator, "Approval" ordering feature 2) Inspection certification according to EN material 3) Product Configurator order code for "Accessories enclosed" 4) Certificates ordered with the equipment (3.1 material certificate and NACE declaration of conformity and PMI tests) apply to the transmitters and flushing rings listed in the table. 5) Scope of delivery: 2 x Endress+Hauser offers additional flushing rings as Technical Special Products (TSP). 4 Endress+Hauser

41 Ordering information Detailed ordering information is available from the following sources: In the Product Configurator on the Endress+Hauser website: -> Click "Corporate" -> Select your country -> Click "Products" -> Select the product using the filters and search field -> Open product page -> The "Configure" button to the right of the product image opens the Product Configurator. From your Endress+Hauser Sales Center: Product Configurator - the tool for individual product configuration Up-to-the-minute configuration data Depending on the device: Direct input of measuring point-specific information such as measuring range or operating language Automatic verification of exclusion criteria Automatic creation of the order code and its breakdown in PDF or Excel output format Ability to order directly in the Endress+Hauser Online Shop Supplementary documentation Field of Activities Field of Activities Pressure measurement, powerful instruments for process pressure, differential pressure, level and flow: FA4P// System components and data manager solutions to complete your measuring point: FA16K/9/ Endress+Hauser 41

44 * *

Pressure Measurement Fittings

Pressure Measurement Fittings Siemens G 2018 Overview ll shut-off fittings can be secured onto walls, racks (72 mm grid) and vertical and horizontal pipes. This offers the advantage when assembling a plant that the shutoff fittings