Project: Comments: Prepared By: Wirelessly dimmable to 0.1% Housing Type

Transcription

1 Type: Project: ADJUSTABLE, ROUND Comments: Prepared By: Flanged Mud-in Bevel Pinhole Bevel Pinhole Tunable, fixture produces a wide range of 9+ CRI/R9 whites from 14K-1,K, as well as pastels and saturated colors Closed-loop color point maintenance to <1 MacAdam ellipse over lifetime and temperature Integrated temperature protection maintains safe operating conditions Wirelessly dimmable to.1% On-board wireless control enables individual addressability and control HARDWARE ORDERING GUIDE HOUSING TRIM Product Line Fixture & Trim BT NCIC SP Platform & Control Voltage & Region Housing Type Optic Shipping Option Model Trim Color Trim Example Housing Order : CM ADRD 9 BT 15L 11 NCIC F SP Example Trim Order : TFRD1 WH F Product Line Commercial CM Residential (Homeworks compatible) HW Fixture & Trim Adjustable, Round Adjustable, Round Mud-in ADRD ADRM 9 Watts 9 13 Watts Watts 18 Platform & Control Wide Gamut, Tunable BT Spot (15 ) Low Glare 15L Flood (25 ) Low Glare 25L Wide Flood () Low Glare 4L Very Wide Flood () Low Glare 6L Spot (15 ) High Output 15H Flood (25 ) High Output 25H Wide Flood () High Output 4H Very Wide Flood () High Output 6H Voltage & Region 12VAC 6Hz, North America VAC 6 Hz, North America 12 Housing Type New Construction, IC/Airtight NCIC Optic 2 (See diagram on page 3) None N Solite S Frost Lens F Hex Louver H Shipping Option Single Pack (Default, ships with Butterfly Brackets & 24 Nailer Bars to be installed in field) SP Model Round Adjustable Bevel Round Adjustable Pinhole Round Adjustable Flangeless Bevel Round Adjustable Flangeless Pinhole Trim Color White Black TFRD1 TFRPA TXRD1 TXRPA WH BK Trim 1 2 (See diagram on page 3) None N Solite Lens S Frost Lens F 1 Downlight is wet location rated when trim is installed with lens. 2 Either an optic accessory or a trim accessory may be used at a time. They cannot be used simultaneously r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved

2 ADJUSTABLE, ROUND SPECIFICATIONS1 OPTICAL & ELECTRICAL PERFORMANCE ENVIRONMENTAL Lumen Output2 (1'' recess) 9W 13W 18W Pinhole lm multiplier 15 beam, low glare 65lm 882lm 192lm beam, low glare 623lm 845lm 146lm.48 beam, low glare 569lm 772lm 955lm.61 beam, low glare 561lm 76lm 941lm.6 15 beam, high output 682lm 928lm 1148lm beam, high output 678lm 923lm 1142lm.48 beam, high output 646lm 878lm 187lm.54 beam, high output 63lm 857lm 161lm.55 CRI (Ra) Lumen Maintenance 3 Color Spatial Uniformity Color Point Range 4 Equivalent Traditional Lamp >9 (R9>9) Dimming Range 4.1 1% lm.9 9W Power consumption.13 13W.18 18W Voltage 12VAC 6Hz 277VAC 6Hz Power Factor >.9 Inrush Current5 Efficacy 5, hours to 25 C T A <2 MacAdam ellipses across field angle 14 K 1, K, Fully Saturated, & Pastel 75W halogen 8mA,.2 ms duration (1'' recess) 9W 13W 18W 15 beam, low glare 72lm/W 68lm/W 61lm/W 25 beam, low glare 69lm/W 65lm/W 58lm/W beam, low glare 63lm/W 59lm/W 53lm/W beam, low glare 62lm/W 58lm/W 52lm/W 15 beam, high output 76lm/W 71lm/W 63lm/W 25 beam, high output 75lm/W 71lm/W 62lm/W beam, high output 72lm/W 68lm/W 59lm/W beam, high output 7lm/W 66lm/W 58lm/W Surge Protection Control Protocol 2.5KV KetraNet Mesh Operating Temperature (T A ) - C Storage Temperature -2 - C Humidity - 95%, Non-condensing Certification UL, cul, 12V: FCC Class B, 277V: FCC Class A Location UL Damp Location, UL Wet Location Available with Trim Lens MECHANICAL Mounting Options Field Replaceable Optics Field Replaceable Light Engine Field Replaceable Power Supply Additional Optic Lens Additional Trim Lens Housing Material Lens Material DIMENSIONS Trim Outside Diameter Trim Inside Diameter Trim Thickness Hanger Bars/ Butterfly Brackets Yes Yes Yes 2.5" Lens, 1/8" Thick 2.75" Lens, 1/8" Thick Powder Coated Steel, Polymer Glass Optics Outside Diameter 2.5" 4" Flanged; 5.5" Mud-in 4.63" Flanged; 3.75" Mud-in Flanged: 2.84" Bevel 1.97" Pinhole Mud-in: 2.76" Bevel 1.97" Pinhole 1/16" (Flanged trims only) Ceiling Thickness.625" 1.5" Emitter Vertical Adjustment (tool-free).75" Housing Vertical Adjustment via Butterfly Bracket 1.75" Adjustability Tilt to 4 Full 364 Rotation Housing Height 3.5" Housing Length 18.38" Housing Width 1" Unit Weight 7.75 lb 1 All performance measurements taken with 1 trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated. 2 Lumen measurement complies with IES LM-79-8 testing procedures. 3 Lumen maintenance values calculated in accordance to TM-21 procedures based on LM-8 compliant measurement data. 4 Intensity and color point controlled via Ketra s wireless network. 5 For more information on inrush current, refer to Ketra's Inrush App Note in the Support section of our website. * For Title 24 and Title 2 compliant model numbers or for more information, please contact Customer Service at sales@ketra.com or r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved

3 ADJUSTABLE, ROUND COMPONENT ORDERING GUIDE REPLACEMENT OPTICS ACCESSORIES MOUNTING KITS OP MA Type Type Mounting Recessed Downlight Recessed Downlight Recessed Downlight Type Optic Spot (15 ) Low Glare Flood (25 ) Low Glare Wide Flood () Low Glare Very Wide Flood () Low Glare Spot (15 ) High Output Flood (25 ) High Output Wide Flood () High Output Very Wide Flood () High Output OP 15L 25L 4L 6L 15H 25H 4H 6H Trim Lens, Round Bevel, Solite Flanged Trims Only Trim Lens, Round Bevel, Frost Flanged Trims Only Trim Lens, Round Mud-in, Solite Mud-in Trims Only Trim Lens, Round Mud-in, Frost Mud-in Trims Only Trim Lens, Pinhole, Solite Trim Lens, Pinhole, Frost Optic Solite Optic Frost Optic Hex Louver TLRDFS TLRDFF TLRDXS TLRDXF TLPINS TLPINF OAS OAF OAH Type Mounting MA Mounting (2) Butterfly Brackets B (2) 24 (6.9cm) Nailer Bar N Note: Downlight is wet location rated when trim is installed with lens. Note: Only one optional optical or trim accessory can be used at a time. LENS ACCESSORY PLACEMENT EMITTER HEAT SINK OPTIC HOUSING OPTIC ACCESSORY OR TRIM LENS CEILING TRIM r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved

4 AUSTIN, TX P: HOUSING FOR FLANGED TRIMS ADJUSTABLE, ROUND X DIMENSION DRAWINGS ROUND BOX FLANGED HOUSING 22.5" [.89mm] ALL KNOCKOUTS 3.5" [88.9mm] 3.9" [78.5mm].63" [16mm] 6.37" [162.mm] 3.96" [1.5mm] 1.7" [256.mm] FO 18.38" [467.mm] FOR REFEREN DRAWIN NOT FO CONSTRUC DRAWIN REVISIO DATE: 1 DRAWING TYPE: PDD DRAWN REVISION #: 1 CHECKE L LL WASH WASH FLANGED BEVEL TRIM FLANGED ADJUSTABLE PINHOLE TRIM DATE: 11/7/216 SCALE: DRAWN BY: SC, CEH CHECKED BY: GEB SCALE: NTS ROUND PROFILE TRIMS ROUND PROFILE TRIMS 3815 S. CAPITAL OF TEXAS HWY SUITE 1 AUSTIN, TX S. CAPITAL OF TEXAS H 3815 S. CAPITAL SUITE 1 OF TEXAS AUSTIN, SUITE TX SHEET DO NA AUSTIN, TX PROD DOCUMENT D FLANGED FLANGED FLANGED PINHOLE FLANGED PINHOLE FLANGED PINHOLE FLANGED 1 SHEET OF 4.63" [117.5mm] 2.84" [72.mm] 4.63" [117.6mm] 1.97" [5.1 mm] 4" [11.6mm] 4" [11.6mm] ADJUSTABLE 1.8" [27.5 mm] 1.48" [37.6 mm] 4.63" [117.5mm] 4.62" [117.3mm] FOR REFERENCE ONLY r1 FOR REFERENCE ONL FOR REFERENCE ON DRAWING TYPE: 5 TYPE: 5 REVISION #: 1 DRAWING TYPE: 5 Designed in Austin, TX ketra.com 218 Ketra, Inc. DRAWING All #: rights reserved DATE: REVISION 11/7/216 #: 1 DRAWN DATE: 11/7/216 BY: SC, CEH REVISION #: 1 CHECKED DRAWN BY: SC, GEBCEH DATE: 11/7/216 SCALE: CHECKED NTSBY: GEB DRAWN BY: SC, CEH SCALE: NTS CHECKED BY: GEB

5 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF KETRA, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF KETRA, INC. IS PROHIBITED. FOR RE ADJUSTABLE, ROUND HOUSING FOR MUD IN TRIMS 3815 S. CAPITAL OF TEXAS H SUITE 1 AUSTIN, TX 7874 DIMENSION DRAWINGS HOUSING FOR MUD IN TRIMS MUD-IN HOUSING MUD-IN TRIM RETAINER.3" [1.mm] ALL KNOCKOUTS WALL WASH 3.5" [87.5mm] 3.9" [78.5mm].61" [15.5mm] 6.37" [162.mm] 5.42" [137.5mm] 7.74" [196.5mm] Ø7.74" [196.5mm] Ø3.55" [Ø9.2mm] [9.2mm] 5.42" [137.5mm] 1.7" [256.mm] 1.14" [28.9mm] 1.14" [28.9mm] 18.38" [467.mm] CO FOR REFERENCE ONL DRAWING TY PROPRIETARY DRAWING TYPE: PDD REVISION #: DATE: 11/7/2 REVISION #: 1 DRAWN BY: S DATE: 11/7/216 DRAWN BY: SC, CEH CHECKED BY CHECKED BY: GEB SCALE: NTS MUD-IN BEVEL TRIM MUD-IN ADJUSTABLE PINHOLE TRIM SCALE: NTS SHEET NAME - PRODUCT DOCUM DOCUMENT DRAWIN ROUND MUD IN ROUND MUD IN ROUND MUD IN ROUND MUD IN 3815 S. CAPITAL OF TEXAS HWY SUITE S. CAPITAL OF TEXAS HWY AUSTIN, TX 7874 SUITE 1 AUSTIN, TX S. CAPITAL OF TEXAS HWY SUITE S. CAPITAL AUSTIN, TX OF 7874 TEXAS HWY SHEET SUITE 1 AUSTIN, TX OF 8 2 WASH FLANGELESS WASH FLANGELESS WALL FLANGELESS WASH FLANGELESS FLANGELESS WALL WASH FLANGELESS PINHOLE FLANGELESS PINHOLE FLANGELESS FLANGELESS PINHOLE FLANGELESS PINHOLE FLANGELESS 3.75" [95.4mm] 2.76" [7.1mm] 3.75" [95.4 mm] 1.97" [5.1mm] 3.55".2mm] 3.55".2mm] 5.5" [139.7mm] ADJUSTABLE ADJUSTABLE 5.5" [139.7mm] ADJUSTABLE ADJUSTABLE 1.9" [27.8 mm] 1.48" [37.6 mm] 3.75" [95.4mm] r1 DRAWING TYPE: 7 REVISION DATE: 11/7/216 #: 1 DATE: 11/7/216 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights REVISION reserved #: 1 FOR REFERENCE ONLY FOR REFERENCE ONLY DRAWING TYPE: 7 DRAWING TYPE: #: 7 DRAWING REVISION #: DRAWN DATE: 11/7/216 BY: SC, CEH DRAWN CHECKED BY: BY: SC, GEB CEH SCALE: CHECKED NTS BY: SCALE: NTS 1 GEB 3.75" [95.4mm] FOR REFERENCE ONLY FOR REFERENCE ONLY DRAWING TYPE: 7 REVISION #: 1 DRAWN BY: SC, CEH DATE: 11/7/216 CHECKED BY: GEB DRAWN BY: SC, CEH SCALE: NTS CHECKED BY: GEB SCALE: NTS

6 ADJUSTABLE, ROUND ISO FOOTCANDLE CHARTS: 27-5K VALUES ONLY, DELIVERED LUMENS LM-79 compliant IES files available upon request. BEAM ANGLE: 15 SPOT, LOW GLARE BEAM ANGLE: 15 SPOT, HIGH OUTPUT ADRD18BT15L 18W ADRD18BT15H 18W BEAM ANGLE: 25 SPOT, LOW GLARE BEAM ANGLE: 25 SPOT, HIGH OUTPUT ADRD18BT25L 18W ADRD18BT25H 18W All performance measurements taken with 1" trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved

7 ADJUSTABLE, ROUND ISO FOOTCANDLE CHARTS: 27-5K VALUES ONLY, DELIVERED LUMENS LM-79 compliant IES files available upon request. BEAM ANGLE: WIDE FLOOD, LOW GLARE ADRD18BT4L 18W BEAM ANGLE: WIDE FLOOD, HIGH OUTPUT ADRD18BT4H 18W BEAM ANGLE: 6 VERY WIDE FLOOD, LOW GLARE ADRD18BT6L 18W BEAM ANGLE: 6 VERY WIDE FLOOD, HIGH OUTPUT Product 1 ADRD18BT6H 18W All performance measurements taken with 1" trim, with light engine at nadir at the low regress position, at 3K, 25 C ambient, 1% power input, unless otherwise stated r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved

8 ADJUSTABLE, ROUND WIDE GAMUT CIE 1931 Color Chart y Green:.256,.6 58 Ketra s tunable spectrum downlight can easily be configured via Ketra s intuitive Design Studio software. The product can reproduce any color point within the triangle shaped gamut indicated in the chart below. With Ketra s innovative optical and thermal feedback system, the color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range Black Body Blue:.17, x Red:.681,.37 Calibrated Gamut: Color point is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of the product and across operating temperature range. Expanded Gamut: Color calibration is relaxed such that each product produces the most saturated color it is cabable of. GENERAL SPECIFICATIONS LED downlight shall employ closed loop optical and thermal feedback capable of maintaining color point accuracy of <1 MacAdam ellipse. LED downlight shall have color spatial uniformity of <2 MacAdam ellipses over full field angle. LED downlight shall have an integrated wireless control onboard. LED downlight shall be capable of a CRI >9 along the Black Body Curve from 27-5K. LED downlight lamp shall be a single source multi-die emitter consisting of both monochromatic and phosphor converted blue LED dye. LED downlight shall be sealed, meeting UL damp location (and UL Wet Location with Wet Location Trim) requirements. LED downlight shall be dimmable to.1% of measured luminous flux with wireless dimming. LED downlight shall be UL listed and RoHS compliant. LED downlight shall be capable of in situ firmware and software upgrades. Ketra LED Fixtures are warrantied to be free from material defects in material and workmanship for five (5) years or 25, hours from date of shipment, whichever is less. LED Fixture shall be # r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved

9 ADJUSTABLE, ROUND TROUBLESHOOTING The uses built-in tests to check wiring and wireless connectivity. These tests run each time the turns on, and may take several minutes. Note: The will NOT run these tests while provisioned to a Design Studio installation. If the finds a problem, it will let you know by emitting a corresponding color or, if no emitter is connected, by flashing the indicator lights on its power supply. DIAGNOSTIC COLORS (REQUIRES EMITTER) The will emit a color to tell you the type of problem. COLOR CONDITION CORRECTION Red Invalid input voltage on the power line Ensure the input voltage matches the expected voltage for the s model. Magenta Poor wireless connectivity Ensure that the is notin a metal enclosure and that there are no significant obstructions between the and other Ketra devices. Note: In some circumstances, magenta is expected. See the note below the table. Yellow Fair wireless connectivity Ensure that the is not in a metal enclosure and that there are no significant obstructions between the and other Ketra devices r1 Designed in Austin, TX ketra.com 218 Ketra, Inc. All rights reserved