FLEXIBLE STRIP LIGHT 1 by SIRS-E

Transcription

1 Project: REMENDED PARTNER 1 by SIRS-E Comments: Prepared By: Ketra's recommended low-profile solution: Ketra has selected SIRS-E to provide a seamless experience to integrate low profile LED strips into a cohesive Ketra controlled space. Fully tunable spectrum delivers white light, pastels and saturated color Color match profiles (/- 100 K) built into Ketra's Design Studio content controlled via DMX. IP40 indoor location or IP68 outdoor location rated options. Optional extrusions support up to two parallel runs of IP40 Flexible Strip Light for increased output applications HARDWARE ORDERING GUIDE Full Roll Options Segment Options3 KS Roll KS Series IP Rating Roll Series IP Rating Segment Length Lead In/Out Config. Series Series Ketra Recommended Flexible Strip Light KS Ketra Recommended Flexible Strip Light KS IP IP 40 (Indoor) Flexible Strip Light, 16.4ft roll, (includes 12" lead in and lead out) IP 68 (Outdoor)Flexible Strip Light, 16.4ft roll, (includes 12" lead in and lead out 2 11 Required Devices Requires a Ketra N3 for DMX control, data cable supplied by others. N3 must be ordered separately. Ketra N3 Recessed Rated Plenum Rated Power Supply Options Power Supplies must be ordered separately. Power Supply ' flexible strip light max per power supply. See p, 3 for product details. EldoLED LINEARdrive VAC, 100W, DMX, UI, CV, 4CH, 12/24V 14.57"Lx1.61"Wx1.18"T EldoLED LINEARdrive VAC, 100W, DMX, UI, CV, 4CH, 12/24V 9.06"Lx3.15"Wx1.18"T KE03 KE05 N3IND16REDBK N3IND16PLEBK IP 40 (Indoor) (Outdoor) 2 11 Segment Length (Max = in (16.13 ft)) Enter segment length in total inches rounded up to nearest inch. Segments are available in lengths of 3.27" increments. Lead in/ Lead Out Configuration 12" Lead In Cable (flying leads) 1 12" Lead In & Lead out Cable (flying leads) 2 Extrusions See page 4 for Extrusion options Accessories See page 5 for Accessory Options XXX 1 The SIRS-E Flexible Strip Light has been tested to match Ketra products as closely as possible. Ketra does not guarantee color point accuracy over the lifetime of any partner products and does not control for batch to batch variation. 2 IP68 Rated Flexible Strip Light must use manufacture soldered connections only. 3 When ordering pre-cut segments be sure to account for the extra length required for cable bend radius and extrusion end caps. See page 8 for actual lengths

2 REMENDED PARTNER SPECIFICATIONS1 OPTICAL & ELECTRICAL PERFORMANCE MECHANICAL Input Voltage Limiting Control Method Power Consumption LED Chip Type LED Density Beam Angle Luminous Flux Maintenance Dimming ENVIRONMENTAL Operating Temperature Certification Location 24V DC CV - Constant Voltage 5.75 W/ft High Quality SMD Diode 22 LEDs/ft 72 LEDs/m ,000 hrs1 DMX PWM F cul UL Listed, E IP 40 - Indoor, Dry IP 68 - Damp, Wet Board Type/Color Mounting DIMENSIONAL Weight Cuttable Segments Reel Length Max Run Length Segment Width Warranty 4oz Density Copper, White PCB Non-Porous: 3M VHB Adhesive Mounting Tape 5.3 oz (16.4ft Reel IP40, w/out pkg) 18.4 oz (16.4ft Reel IP68, w/out pkg) 3.27 in (83mm) 16.4 ft (5m) 16.4ft, 5m, 10% luminous flux loss 0.47 in (12mm) for IP in (14mm) for IP68 5 Year SIRS-E Limited Warranty DMX SAMPLE CHART2, 3 CCT 2400K 2700K 3000K 3200K 3500K 4000K 8200K Luminous Flux (1ft) CRI R DMX - Red 40,000 8,000 3,500 2, Full, 65,535 DMX - Green 12,500 3,000 4,500 5,500 7,700 12,300 Full, 65,535 DMX - Blue ,300 3,400 5,200 8,750 Full, 65,535 DMX - White 65,535 65,535 65,535 65,535 65,535 65,535 Full, 65,535 NOTES A good technique to minimize brightness loss and increase lumen output on CV LED Strips is to power the strip on both sides. LED electrical and photometric characteristics change with the manufacturing batch/bin date. Approximately 3-Step MacAdam Ellipses between batches. SIRS-E reserves the right to change any data without prior notice. 1 Specifications are provided by SIRS-E, and are subject to change without notice. 2 After 75,000 hrs: 30% Luminous Flux loss, 10% Chromaticity change, as per LM DMX profile must be set to 16bit RGBW in Ketra's Design Studio and LED driver must be set to 16bit mode with a linear dim curve. 4 The DMX chart above reflects measurements for the full intensity of each CCT value. Color point may shift when dimming.

3 REMENDED PARTNER POWER SUPPLY & CONTROLLER DETAILS KE05 KE03/ KE05 POWER SUPPLY SPECIFICATIONS 1,2 INPUT CHARACTERISTICS Input Voltage Input Current Input frequency VAC, VDC 1.05A 120V/60Hz 0.5A 230V/50Hz 0.45A 277V/60Hz 50-60Hz Power full load >0.94 Full Load <10% Inrush current Surge protection Standby power OUTPUT CHARACTERISTICS LED output load LED output power LED output voltage LED output current 35A V/60Hz 67A V/50Hz 75A V/60Hz 3kV (L to N), 4kV (L/N to ) <0.5W 24V: 1A per output For UL Class 2: 24V: 1A per output 5A max common anode 100W max LED output 4 (UL Class 2) Circuit protection 24V DC (selectable via DIP switch) 2.8A absolute max rating per output To prevent excessive output current from damaging the LED driver, it is highly recommended to use circuit protection appropriate for your application s nominal current and inrush current requirements. ENVIRONMENTAL Operating Temperature Certification WARRANTY Warranty -40 C - 50 C UL 1310, UL 8750 (Class 2 Output), FCC 47 CFR Part 15 class B, ROHS2 3 Years LED WIRE LENGTH Maximum wire length from LED driver to LED engine at full load: Notes: AWG Value Distance (m) Distance (ft) Please observe voltage drop over long wire lengths Longer wire lengths increase EMI susceptibility KE03 DIMENSIONS, WEIGHT Weight LxWxH 31oz / 880g KE03: 14.57x1.61x1.18in / 370x41x30mm KE05: 9.06x3.15x1.18in / 230x80x30mm KE05 1 Specifications are provided by eldoled, and are subject to change without notice. 2 LED driver must be set to 16bit mode with a linear dim curve.

4 REMENDED PARTNER EXTRUSION DETAILS Extrusions do not include endcaps, which must be ordered separately. KKLXO1 Extrusion KKOX01 45 Extrusion KKGX01 Extrusion Linear extrusion, surface mount, with frosted linear lens, & mounting brackets 45 linear extrusion, surface mount, with frosted lens Shallow linear extrusion, surface mount, with frosted lens, & mounting brackets FIXED MOUNT SURFACE MOUNT FIXED MOUNT (3) fixed mounting brackets 1.02"W x 0.96"H x 39.4 L KKLASF Curved lens 1.78" X 1.5" X 39.4" KKOACS Square lens & (3) fixed mounting brackets 1.02"W x 1.06"H x 39.4 L KKGASF ADJUSTABLE MOUNT (3) adjustable mounting brackets 1.02"W x 0.96"H x 39.4 L KKLASA Square lens 1.78" X 1.5" X 39.4" KKOASS Round lens & (3) fixed mounting brackets 1.02"W x 1.06"H x 39.4 L KKGARF ADJUSTABLE MOUNT Fixed Mounting Bracket Adjustable Mounting Bracket Square lens & (3) adjustable mounting brackets 1.02"W x 1.06"H x 39.4 L KKGASA Round lens & (3) adjustable mounting brackets 1.02"W x 1.06"H x 39.4 L KKGARA Fixed Mounting Bracket Adjustable Mounting Bracket END CAPS KKLXO1 End Caps KKOX01 End Caps KKGX01 End Caps Linear extrusion end cap KKLE01 For curved lens KKOE01 For square lens KKGE01 For square lens KKOE02 For round lens KKGE02

5 REMENDED PARTNER ACCESSORY DETAILS Accessories Quick Coupler with Lead in Cables 12" KS30 Quick Coupler with Lead Out Cables 12" KS31 End-to-End Quick Coupler KS32 12" Quick Jumper Cable KS44 Heat Shrink Tubing 3/8" X 12" - Black KS34 Heat Shrink Tubing 3/8" X 12" - White KS35 Power Supply Wire, 16 AWG, 2 Conductor Cable - Wire Only, 1ft KS40 RGBW LED cable - Wire Only, 1ft KS41

6 L N D D B A DC Out Activity B A Status Monitor DMX DALI TRIAC Power Analog I/O DMX Out DMX In DALI L N D D B A DC Out Activity B A Status Monitor DMX DALI TRIAC Power Analog I/O DMX Out DMX In DALI REMENDED PARTNER DIMENSION DRAWINGS KS-10 KS-11 WIRING DIAGRAM KETRA N3, SIRS-E 3815 S. CA AU P GENERAL N D1 DMX OUT DMX OUT - D1 DMX IN DMX IN - DMX OUT DMX OUT - D1 DMX OUT DMX OUT - D1 DMX IN DMX IN - DMX OUT DMX OUT AWG WIRE AWG WIRE 12V / 24V DIP SWITCH (SET TO 24V BEFORE 12V ENERGIZING) / 24V DIP SWITCH (SET TO 24V BEFORE ENERGIZING) 24V 12V 24V 12V INACTIVE INACTIVE SIRS-E RGBW FLEXIBLE STRIP SIRS-E RGBW FLEXIBLE STRIP 1. KETRAN 3815 S. CAPITAL O WIRELE SUITE AUSTIN, TX 2. A P: NODE ENABLE GENERAL NOTES: KETR 1. KETRANET MESH WIRELESS PER CONT INS 2. A NODE 4. ALL IS A KET ENABLED WIREL BE INST KETRANET RANGE ME PER INSTALLATIO 4. ALL KETRANET M BE INSTALLED W RANGE OF THE N 120VAC, 60 Hz MAINS SUPPLY D D DMX Out DMX In DALI TRIAC Control AC Mains IN N L N3 DETAIL VIEW 1 L N S Power & Signal OUT N3 DETAIL VIEW TO NEXT DMX DEVICE (IF APPLICABLE) 120VAC, 60 Hz MAINS SUPPLY D D DMX Out DMX In DALI TRIAC Control AC Mains IN N L 1 eldoled S DRIVER L N S Power & Signal OUT TO NEXT DMX DEVICE (IF APPLICABLE) eldoled S DETAIL VIEW eldoled S DRIVER eldoled S DETAIL VIEW VAC MAINS SUPPLY AWG WIRE VAC MAINS SUPPLY AWG WIRE D1 KETRANET MESH WIRELESS NETWORK BELDEN-9729 OR EQUIVALENT DMX, 2 TWISTED PAIRS, ED KETRANET MESH Ketra Recommended Partner ketra.com WIRELESS NETWORK BELDEN-9729 OR D1 EQUIVALENT DMX, Ketra, Inc. All rights reserved TWISTED PAIRS, ED KEY KEY FOR REFERE NOT F CONSTRU FOR R DRAWING TYPE: DRAWING #: REVISION #: CO DATE: 4/12/2018 DRAWIN DRAWN BY: LEB DRAWIN CHECKED BY: C SCALE: REVISIO NTS DATE: 4 SHEET N DRAWN KETRA ELDOLE CHECKE SIRS SCALE: SHEE 1 01 OF E

7 REMENDED PARTNER FULL DMX CHART 1 CCT Luminous Flux (1ft) CRI R9 DMX - Red DMX - Green DMX - Blue DMX - White Ketra Design Studio DMX profile: 16bit RGBW LED driver setting: 16bit mode, linear dim curve. 2 The DMX chart above reflects measurements for the full intensity of each CCT value. Color point may shift when dimming.

8 REMENDED PARTNER FULL DMX CHART 1 - COARSE/FINE DMX VALUES Luminous Red Red CCT CRI R9 Flux (1ft) Coarse Fine Green Coarse 1 Ketra Design Studio DMX profile: 16bit RGBW LED driver setting: 16bit mode, linear dim curve. 2 The DMX chart above reflects measurements for the full intensity of each CCT value. Color point may shift when dimming. Green Fine Blue Coarse Blue Fine White Coarse White Fine

9 REMENDED PARTNER SEGMENT LENGTHS Order Length, Nominal (inches, rounded) Actual Length (inches) Order Length, Nominal (inches, rounded) Actual Length (inches) ROLL

10 Testing was performed in accordance with LM REMENDED PARTNER % SIRS Electronics Inc % Average Luminance cd/m2 Catalog Number % Horizontal ACUHUE-12CV ALL COLORS Vertical Angle Angle % Electrical 89 Test Conditions 22.8% Voltage Current 1 Power Power 0.2% Factor Frequency 45 Current THD VDC A W 100% N/A N/A N/A K 2200K K 3500K K 2200K K 3000K 4500K 3500K K 4000K 5700K 4500K K 5700K Outside all Quadrangles 0.32 Outside all Quadrangles x y y MORE DATA1: ALL FULL Zonal Lumen Summary Zone Lumens %Luminaire % Deg. Plane Deg. Plane Deg. Plane Nominal CCT Quadrangles Nominal CCT Quadrangles Flux vs Wavelength x Flux vs Wavelength Deg. Plane Spectral Flux (mw/nm) Spectral Flux (mw/nm) Spacing Criteria Intensity (Candlepower) Summary Angle Mean CP Lumens Cone 0 of Light Tabulation 126 Mounting 5 Foot-candles 125 Diameter 12 Height (ft) 10 at 124 Nadir (ft) Intensity 60 (Candlepower) 64 Summary Angle Mean CP Lumens Color Rendering 110 Index Details 35 Ra (CRI) R R R R R R R R R R R R R R Summary of Results Total Lumen Output Luminaire Efficacy Max. Candela lm/ft 52.9 lm/w Chromaticity Coordinates Chromaticity (x) Wavelength (nm) Chromaticity (y) Specifications are provided by SIRS-E, and are subject to change without Chromaticity notice. (u) XX-XX Chromaticity (v) r Specifications are Chromaticity subject to change (u') without notice Wavelength (nm) Chromaticity (v') Duv CCT 127 Cd 8200K CRI 58.3 Duv TM-30 Rf 0.0 TM-30 Rg 0.0 Electrical Test Conditions Color Rendering Index Details Ra (CRI) 58.3 R R R R R R R R R R R R R R Chromaticity Coordinates Chromaticity (x) Chromaticity (y) Chromaticity (u) Chromaticity (v) Chromaticity (u') Chromaticity (v') Duv