Eliminator Liquid line filter driers, type DCL and DML
|
|
- Mavis Berniece Ellis
- 5 years ago
- Views:
Transcription
1 Eliminator Liquid line filter driers, type DCL and DML Flare connection Solder connection (copper) REFRIGERATION AND AIR CONDITIONING Technical leaflet
2 Eliminator Liquid line filter driers, type DCL and DML Contents Page Introduction Features Approvals Technical data Technical data and capacities Ordering Identification Selection Selection example Design and function Dimensions and weights - Flare connections Dimensions and weights - Solder connections Conversions RDAS02 DKRCC.PD.E00.B.02 / H0 Danfoss A/S (RC-CMS / HBS), 0-0
3 Eliminator Liquid line filter driers, type DCL and DML Introduction TE2 Eliminator liquid line filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid particles. With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive impurities. There are two types of Eliminator cores. DML driers have a core composition of 0% Molecular Sieve, while type DCL contain 0% Molecular Sieve with % activated alumina. All Eliminator driers have a solid core with binding material held to an absolute minimum. Core selection is primarily based on the refrigerant oil used in the system. Eliminator type DML, with a solid core of 0% Molecular Sieve, is optimized for use with HFC refrigerants and polyolester (POE) or polyalkyl glycol (PAG) oils. DML driers are designed for applications requiring high water adsorption, and can be used with any manufacturer s compressor. Because type DML driers contain no activated alumina, oil additives will not be depleted. Eliminator type DCL, with a solid core of 0% Molecular Sieve and % activated alumina, is the drier of choice for systems with HCFC and CFC refrigerants and mineral or alkyl benzene oils. DCL driers are particularly suited for systems that operate at high condensing temperatures and require high drying capacity. Features The Core DML 0% Å Molecular Sieve core. High drying capacity minimizing the risk of acid formation (hydrolysis). Optimized for HFC refrigerants (Ra, R0A, RA, etc.) with POE or PAG oils. Compatible with R. Will not deplete oil additives. DCL 0% Å Molecular Sieve with % activated alumina. Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity. Optimized for CFC and HCFC refrigerants (R, R02, etc.) with mineral or alkyl benzene oils. Compatible with HFC s and refrigerant blends. The Shell UL approved for MWP up to bar ( psig). Available with solder (copper) and flare connections. Compact cubic inches drier ideal for refrigeration and air conditioning units. Corrosion resistant powder-painted finish. Can be used in all environments including marine applications. Allows installation with any orientation provided the arrow is in the flow direction. Available in sizes from to cubic inches. The Filter 2 µm (0.00 in.) filter provides high retention with minimal pressure drop. Thermally stable up to C ( F). Approvals UL file no. SA PED /EC - ap Danfoss A/S (RC-CMS / HBS), 0-0 RDAS02 DKRCC.PD.E00.B.02 / H0
4 Eliminator Liquid line filter driers, type DCL and DML Technical data Surface and volume Solid core surface Solid core volume Filter drier volume (shell volume) Filter drier volume (net volume) Filter [cm 2 ] [cm ] [l] [l] DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL DML/DCL. 0.0 Acid capacity Temperature range Acid Filter capacity [g] DCL 0 0. DCL 0 0. DCL 0. DCL.2 DCL 0.0 DCL.0 DCL DCL.0 0 to 0 C ( 0 to 0 F) Technical data and capacities ) Drying capacity is based on following moisture content test standards before and after drying: Ra: From 0 ppm W to ppm W. If drying to 0 ppm W is required, reduce stated capacities by %. R0A, R0: From ppm W to 0 ppm W. R0C: From ppm W to 0 ppm W. RA: From 0 ppm W to 0 ppm W. R: From 0 ppm W to 0 ppm W in accordance with ARI -. R2: From ppm W to ppm W in accordance with ARI -. R02: From ppm W to 0 ppm W in accordance with ARI -. 2 ) Given in accordance with ARI - for t e = C ( F), t c = 0 C ( F) and p = 0.0 bar ( psig). DML Drying and liquid capacity - DML DML 02/02s DML 02.s DML 0/0s DML 0s DML 02/02s DML 02.s DML 0/0s DML 0s DML 0s DML 02/02s DML 02.s DML 0/0s DML 0/0s DML 0/0s DML 2s DML 2.s DML /s DML s DML /s DML /s DML s DML 0/0s DML 0/0s DML 0/0s DML 0/0s DML 0s DML 0s DML DML s DML s DML s DML s DML 0s DML 0s DML 0s DML 0s DML s DML s Ra Drying capacity [kg refrigerant] ) Liquid capacity [kw] 2 ) Max R0A R, R0C R0 RA C 2 C C 2 C C 2 C Ra, R0, R0A, R, R0C, RA Ra R0A R R R0C RA Working Pressure PS [bar] RDAS02 DKRCC.PD.E00.B.02 / H0 Danfoss A/S (RC-CMS / HBS), 0-0
5 Eliminator Liquid line filter driers, type DCL and DML Technical data and capacities ) Drying capacity is based on following moisture content test standards before and after drying: Ra: From 0 ppm W to ppm W. If drying to 0 ppm W is required, reduce stated capacities by %. R0A, R0: From ppm W to 0 ppm W. R0C: From ppm W to 0 ppm W. RA: From 0 ppm W to 0 ppm W. R: From 0 ppm W to 0 ppm W in accordance with ARI -. R2: From ppm W to ppm W in accordance with ARI -. R02: From ppm W to 0 ppm W in accordance with ARI -. 2 ) Given in accordance with ARI - for t e = C ( F), t c = 0 C ( F) and p = 0.0 bar ( psig). DCL Drying and liquid capacity - DCL DCL 02/02s DCL 02.s DCL 0/0s DCL 02/02s DCL 02.s DCL 0/0s DCL 02/02s DCL 02.s DCL 0/0s DCL 0/0s DCL 2s DCL 2.s DCL /s DCL s DCL /s DCL /s DCL s DCL 0/0s DCL 0/0s DCL 0/0s DCL 0/0s DCL 0s DCL 0s DCL DCL s DCL s DCL s DCL s DCL 0s DCL 0s DCL 0s DCL s DCL s Ra Ra, R0, R0A, R0C, RA Drying capacity [kg refrigerant] ) Liquid capacity [kw] 2 ) Max R0A R0 R0C RA C 2 C C 2 C C 2 C Ra R0A R R0C RA Working Pressure PS [bar] DCL 02/02s DCL 02.s DCL 0/0s DCL 02/02s DCL 02.s DCL 0/0s DCL 02/02s DCL 02.s DCL 0/0s DCL 0/0s DCL 2s DCL 2.s DCL /s DCL s DCL /s DCL /s DCL s DCL 0/0s DCL 0/0s DCL 0/0s DCL 0/0s DCL 0s DCL 0s DCL DCL s DCL s DCL s DCL s DCL 0s DCL 0s DCL 0s DCL s DCL s R, R2, R02 Drying capacity [kg refrigerant] ) Liquid capacity [kw] 2 ) Max Working R R2 R02 Pressure C 2 C C 2 C C 2 C R R2 R02 PS [bar] Danfoss A/S (RC-CMS / HBS), 0-0 RDAS02 DKRCC.PD.E00.B.02 / H0
6 Eliminator Liquid line filter driers, type DCL and DML Ordering Flare DCL Flare DML DCL 02* DCL 02 DCL 0* DCL 0 DCL 02 DCL 0 DCL 02 DCL 0 DCL 0 DCL 2 DCL DCL DCL DCL DCL 0 DCL 0 DCL 0 DCL 0 DCL DCL DCL in. / / / / / / / / / / * Wire mesh in filter drier outlet 02Z000 02Z0 02Z00 02Z0 02Z002 02Z00 02Z00 02Z00 02Z00 02Z00 02Z00 02Z00 02Z0 02Z0 02Z002 02Z00 02Z00 02Z0 02Z0 02Z02 02Z0 mm Z000 02Z0 02Z00 02Z0 02Z002 02Z00 02Z00 02Z00 02Z00 02Z00 02Z00 02Z00 02Z0 02Z0 02Z002 02Z00 02Z00 02Z0 02Z0 02Z02 02Z0 DML 02* DML 0* DML 0 DML 02 DML 0 DML 02 DML 0 DML 0 DML 0 DML 2 DML DML DML DML DML 0 DML 0 DML 0 DML 0 DML DML DML in. / / / / / / / / / / / 02Z0 02Z0 02Z00 02Z0 02Z0 02Z0 02Z00 02Z0 02Z0 02Z0 02Z0 02Z0 02Z0 02Z0 02Z00 02Z000 02Z00 02Z0 02Z0 02Z0 02Z0 mm Z0 02Z0 02Z00 02Z0 02Z0 02Z0 02Z00 02Z0 02Z0 02Z0 02Z0 02Z0 02Z0 02Z0 02Z00 02Z000 02Z00 02Z0 02Z0 02Z0 02Z0 Solder (copper) DCL Solder (copper) DML DCL 02s* DCL 02.s DCL 0s DCL 02s DCL 02.s DCL 0s DCL 02s DCL 02.s DCL 0s DCL 0s DCL 2s DCL 2.s DCL s DCL s DCL s DCL s DCL s DCL 0s DCL 0s DCL 0s DCL 0s DCL 0s DCL 0s DCL s DCL s DCL s DCL s DCL 0s DCL 0s DCL 0s DCL s DCL s in. / / / / / / / / / / / / / / / / / / / / / * Wire mesh in filter drier outlet 02Z0 02Z0 02Z0 02Z0 02Z 02Z0 02Z0 02Z 02Z02 02Z02 02Z02 02Z 02Z02 02Z02 02Z0 02Z00 02Z0 02Z000 02Z00 02Z002 02Z00 02Z00 02Z00 02Z0 02Z0 02Z0 02Z0 02Z0 02Z00 02Z00 02Z0 02Z0 mm Z02 02Z0 02Z0 02Z0 02Z 02Z0 02Z02 02Z 02Z0 02Z02 02Z02 02Z 02Z00 02Z0 02Z0 02Z00 02Z0 02Z0 02Z0 02Z002 02Z02 02Z00 02Z00 02Z0 02Z0 02Z0 02Z02 02Z0 02Z00 02Z0 02Z0 02Z0 DML 02s* DML 02.s DML 0s DML 0s DML 02s DML 02.s DML 0s DML 0s DML 0s DML 02s DML 02.s DML 0s DML 0s DML 0s DML 2s DML 2.s DML s DML s DML s DML s DML s DML 0s DML 0s DML 0s DML 0s DML 0s DML 0s DML s DML s DML s DML s DML 0s DML 0s DML 0s DML 0s DML s DML s in. / / / / / / / / / / / / / / / / / / / / / / / 02Z0 02Z0 02Z00 02Z2 02Z0 02Z 02Z0 02Z 02Z0 02Z0 02Z 02Z0 02Z0 02Z02 02Z0 02Z 02Z0 02Z0 02Z0 02Z0 02Z0 02Z00 02Z00 02Z00 02Z000 02Z00 02Z002 02Z0 02Z02 02Z0 02Z0 02Z0 02Z0 02Z00 02Z00 02Z0 02Z0 mm Z0 02Z0 02Z0 02Z2 02Z02 02Z 02Z0 02Z0 02Z0 02Z0 02Z 02Z0 02Z00 02Z02 02Z02 02Z 02Z0 02Z0 02Z0 02Z0 02Z0 02Z0 02Z0 02Z00 02Z000 02Z00 02Z0 02Z0 02Z02 02Z0 02Z0 02Z0 02Z0 02Z00 02Z0 02Z0 02Z0 RDAS02 DKRCC.PD.E00.B.02 / H0 Danfoss A/S (RC-CMS / HBS), 0-0
7 Eliminator Liquid line filter driers, type DCL and DML Identification Example for type codes D C L 0 s codes Filter drier D Solid core C M 0 / % composite core 0% Molecular Sieve core Application L Liquid line Size (volume) Connection (filter connection in / of an inch increments) Connection type 2 2. (blank) s in in in in 0 in in 0 in in in. / mm / in. / mm / in. / mm in. / 2 mm / in. / mm in. / () mm / in. / mm / in. / 2 mm Flare connection Solder connection Selection selection is made considering the application ) For CFC systems, DCL filter driers are recommended. In these systems, circumstances may require the use of a filter drier with acid adsorbing properties. 2 ) Use of filter driers containing activated alumina are not recommended in systems with oils containing additives. Refrigerant Oil DCL DML HFC Can be used Recommended HCFC Recommended Can be used CFC Recommended Not recommended ) Mineral or AB Recommended Can be used POE or PAG, pure Can be used Recommended POE or PAG, with additives Not recommended 2 ) Recommended Selection example SI-units Select the appropriate type (DML or DCL) based on refrigerant and oil type. Then select the drier size based on the adsorption and liquid capacity required. a. Amount of charge: 2 kg Ra at t L = C To dry 2 kg Ra at C from 0 to 0 ppm moisture, a DML is necessary. b. Cooling capacity: Q e = kw To obtain a mass flow corresponding to kw cooling capacity with a DML filter drier, a / inch connection must be chosen. Larger connections can be chosen in accordance with the liquid line dimension. c. Result DML or DML s can be used. If the initial moisture content is very small or a planned change of the filter drier is considered, a smaller filter drier size can be chosen. DML 02/02s DML 02.s DML 0/0s DML 0s DML 2s DML 2.s DML /s DML s DML /s DML /s DML s Ra Drying capacity [kg refrigerant] ) Liquid capacity [kw] 2 ) Max R0A R, R0C R0 RA C 2 C C 2 C C 2 C Ra 0 R0A R0 0 R R0C RA 2 Working Pressure PS [bar] Danfoss A/S (RC-CMS / HBS), 0-0 RDAS02 DKRCC.PD.E00.B.02 / H0
8 Eliminator Liquid line filter driers, type DCL and DML Design and function DML / DCL 0 DML / DCL 0, DML / DCL 0 DML / DCL 0,. Inlet 2. Spring. Solid core. Polyester mat. Perforated plate. Seal cap, flare connection. Seal cap, solder connection DML / DCL 0, The relatively large diameter of the filter drier means that the liquid flow velocity is suitably low and the pressure drop minimal. Powder formation is eliminated because the solid core grains are bonded and cannot move against each other. Dimensions and weights Flare connections A A L D DCL/DML 02 mm 0 0. kg DCL/DML 0 mm kg RDAS02 DKRCC.PD.E00.B.02 / H0 Danfoss A/S (RC-CMS / HBS), 0-0
9 Eliminator Liquid line filter driers, type DCL and DML Dimensions and weights (Continued) Flare connections A A L D DCL/DML 02 mm kg DCL/DML 0 mm kg A A L D DCL/DML 02 mm kg DCL/DML 0 mm kg DCL/DML 0 mm kg DML 0 mm kg DCL/DML 2 mm 0 0. kg DCL/DML mm kg DCL/DML mm 0 0. kg DCL/DML mm 0 0. kg DCL/DML mm kg A A L D DCL/DML 0 mm kg DCL/DML 0 mm kg DCL/DML 0 mm kg DCL/DML 0 mm kg DCL/DML mm - -. kg DCL/DML mm - -. kg DCL/DML mm kg Danfoss A/S (RC-CMS / HBS), 0-0 RDAS02 DKRCC.PD.E00.B.02 / H0
10 Eliminator Liquid line filter driers, type DCL and DML Dimensions and weights (Continued) Solder connections A A B L D DCL/DML 02s mm kg DCL/DML 02.s mm kg DCL/DML 0s mm 0 0. kg DCL/DML 0s mm 0 0. kg A A B L D DCL/DML 02s mm kg DCL/DML 02.s mm kg DCL/DML 0s mm kg DML 0s mm kg DML 0s mm kg A A B L D DCL/DML 02s mm kg DCL/DML 02.s mm kg DCL/DML 0s mm kg DCL/DML 0s mm kg DML 0s mm kg DCL/DML 2s mm kg DCL/DML 2.s mm kg DCL/DML s mm kg DCL/DML s mm kg DCL/DML s mm kg DCL/DML s mm kg DCL/DML s mm kg RDAS02 DKRCC.PD.E00.B.02 / H0 Danfoss A/S (RC-CMS / HBS), 0-0
11 Eliminator Liquid line filter driers, type DCL and DML Dimensions and weights (Continued) Solder connections A A B L D DCL/DML 0s mm kg DCL/DML 0s mm kg DCL/DML 0s mm kg DCL/DML 0s mm kg DCL/DML 0s mm kg DCL/DML 0s mm kg DCL/DML s mm kg DCL/DML s mm kg DCL/DML s mm kg DCL/DML s mm kg DCL/DML 0s mm kg DML 0s mm kg DCL/DML 0s mm kg DCL/DML 0s mm kg DCL/DML s mm kg DCL/DML s mm kg Conversions Drops of water = (kg of refrigerant (Initial PPM of water - Final PPM of water)) 0 See ARI standard - for recommended initial and final PPM values for different refrigerants. Danfoss A/S (RC-CMS / HBS), 0-0 RDAS02 DKRCC.PD.E00.B.02 / H0
12 Eliminator Liquid line filter driers, type DCL and DML 2 RDAS02 DKRCC.PD.E00.B.02 / H0 Danfoss A/S (RC-CMS / HBS), 0-0
MAKING MODERN LIVING POSSIBLE. Eliminator Liquid line filter driers, DCL and DML. Flare connection. Solder connection (copper) Technical brochure
MAKING MODERN LIVING POSSIBLE Eliminator Liquid line filter driers, DCL and DML Flare connection Solder connection (copper) Technical brochure Contents Page Introduction........................................................................................
More informationELIMINATOR Hermetic filter drier Types DML and DCL
MAKING MODERN LIVING POSSIBLE Data sheet ELIMINATOR Hermetic filter drier Types DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types
More informationELIMINATOR Hermetic filter drier Types DML and DCL
Data sheet ELIMINATOR Hermetic filter drier s DML and DCL All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores. DML driers
More informationELIMINATOR Hermetic filter drier Types DCL and DML
Data sheet ELIMINATOR Hermetic filter drier s DCL and DML All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores. DML driers
More informationELIMINATOR Hermetic bi-flow filter drier Types DMB and DCB
Data sheet ELIMINATOR Hermetic bi-flow filter drier s DMB and DCB Hermetic bi-flow filter driers, types DMB and DCB are for use in liquid lines on heat pumps. Hermetic bi-flow filter driers have built-in
More informationELIMINATOR Hermetic bi-flow filter drier Types DMB and DCB
Data sheet ELIMINATOR Hermetic bi-flow filter drier s DMB and DCB Hermetic bi-flow filter driers, types DMB and DCB are for use in liquid lines on heat pumps. Hermetic bi-flow filter driers have built-in
More informationTechnical brochure Eliminator filter drier DCR - with replaceable solid core
MAKING MODERN LIVING POSSIBLE Technical brochure Eliminator filter drier DCR - with replaceable solid core www.danfoss.com Contents Page Introduction...3 Features...3 Approvals...3 Technical data...4 of
More informationReplaceable solid cores filter driers type CSR
Replaceable solid cores filter driers type CSR N of cores Nominal volume [cm 3 ] (in 3 ) DIMENSIONS AND TECHNICAL CHARACTERISTICS Filtering surface ODS Ø [in.] [mm] ØD1 ØD2 H1 P E H K CSR485 5/8" 16 148
More informationHANDBOOK REFRIGERATING SYSTEM PROTECTORS. Ed REFRIGERATING SYSTEM PROTECTORS DP-ED 01/ ENG 1
HANDBOOK Ed. 2017 DP-ED 01/2017 - ENG 1 CHAPTER 3 Hermetic filter driers CERTIFIED BY UNDERWRITERS LABORATORIES INC. For refrigeration plants that use HCFC, HFC or HFO refrigerants APPLICATIONS The filters
More informationADK Filter Drier. Alco Controls. Filter Drier. Features
ADK is a hermetic filter-drier with internal solid block for use on liquid line. Features Solid block Hermetic design Rugged steel shells Corrosion resistant epoxy paint Solder connection made from copper
More informationFDB Filter Drier. Alco Controls. FDB Filter Drier. Features. Introduction. Moisture removal capability. Construction
ALCO FDB is a hermetic filter-drier in compacted bead style for use on liquid line. Features Compacted bead style (spring loaded) Hermetic design Rugged steel shells Corrosion resistant epoxy paint Solder
More informationFDB Filter Drier. FDB Filter Drier. Technical Data
Technical Data ALCO FDB is a hermetic filter-drier in compacted bead style for use on liquid line. Features Compacted bead style (spring loaded) Hermetic design Rugged steel shells Cushioned flow for non-turbulent
More informationBFK Bi-flow Filter Drier
ALCO is a hermetic Bi-flow filter-drier in solid block style for use on liquid line in reversible refrigeration systems such as heat pump units. Features Solid block style Integrated check valves insure
More informationREFRIGERANT RECOVERY PRODUCTS
REFRIGERANT RECOVERY PRODUCTS PARKER REFRIGERANT RECOVERY PRODUCT Parker provides a large selection of components for recovery, recycle and reclaim machines, protecting them from the many types of contaminants
More informationCrankcase pressure regulator Type KVL
Data sheet Crankcase KVL KVL crankcase are used to protect the compressor motor against overload experienced during startup after long off periods or just after defrost periods. They are installed in the
More informationCrankcase pressure regulator Type KVL
MAKING MODERN LIVING POSSIBLE Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor
More informationUni-Flow Filter Driers
STNDRD Uni-Flow Driers The filter driers of series DTG are used in refrigeration system with unidirectional flow to absorb moisture and acid in the system and to filter out the impurities. FETURES HIGH
More informationDCY. Anti-acid filter driers Refrigeration & Climate Components Solutions. n Applications
1.12 n Applications Filtering and drying of refrigerants and acid neutralization for liquid lines of refrigerating and air conditioning installations. n Functional features Products are compatible with
More informationCrankcase pressure regulator Type KVL
Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor against overload during start-up
More informationFILTER DRIERS PART NUMBER SIGNIFICANCE LIQUID LINE FILTER DRIERS TOTALINE LIQUID LINE FILTER DRIER PHYSICAL DATA DIMENSIONS
TOTALINE LIQUID LINE FILTER DRIERS P502-8 SERIES P PART NUMBER SIGNIFICANCE P353 FEATURES Compacted bead filter drier Universal Replacement CFC, HCFC, HFC refrigerants Filtration first for more effective
More informationPRODUCT DATA DTG SERIES Unidirectional Filter Driers
The series DTG unidirectional filter-driers are used to protect air conditioning and refrigeration systems from moisture and contamination. FEATURES HIGHLY EFFICIENT IN MOISTURE AND CONTAMINATION REMOVAL
More informationParker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
More informationR-22 R-404A/R-502/R-507A R-12/
EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Take-Apart Liquid Line Filter Driers in Tons* Description, Low Temp. & Commercial Installations Air Conditioning Field Replacement
More informationJune 2015 / BULLETIN Catch-All. Liquid & Suction Line Filter-Driers FILTER-DRIERS. It s the CORE that counts!
June 2015 / BULLETIN 40-10 Catch-All Liquid & Suction Line Filter-Driers FILTER-DRIERS It s the CORE that counts! Page 2 Bulletin 40-10 Table of Contents The Sporlan Catch-All Liquid and Suction Line Filter-Driers
More informationFILTER DRIERS - SPORLAN
FILTER DRIERS - SPORLAN The universal acceptance of the Catch-All Filter-Drier is due to its unique moulded porous core, consisting of a blend of highly effective desiccants. The quality features built
More informationEMERSON CLIMATE TECHNOLOGIES
STAS STEEL TAKE-APART FILTER DRIER APPLICATION Replaceable core filter-drier for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. FEATURES Unique internal
More informationHot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory)
MAKING MODERN LIVING POSSIBLE Data sheet Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory) A CPCE hot gas bypass regulator is used to adapt compressor capacity to actual evaporator
More informationTAKE-A-PART SHELLS TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES PART NUMBER SIGNIFICANCE
TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES P PART NUMBER SIGNIFICANCE P360 SIZE (in 1/8 ) 505-8 TOTALINE FILTER DRIER SHELLS APPLICATION Totaline Replaceable Core Shells offer the
More informationAnti-acid filter driers DCY
1.1 n Applications Filtering and drying of refrigerants and acid neutralization for liquid lines of refrigerating and air conditioning installations. n Functional features o Products are compatible with
More informationThermostatic expansion valves Type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants including
More informationREFRIGERANTS AND LUBRICANTS
Service Engineers Section Bulletin No 10 REFRIGERANTS AND 1.0 INTRODUCTION - THE NEED FOR IN REFRIGERATION SYSTEMS Lubricants (oils) are required in refrigeration systems to: Reduce friction by interposing
More informationElectric expansion valves Type ETS 6
MAKING MODERN LIVING POSSIBLE Data sheet Electric expansion valves Type ETS 6 The range of Electric expansion valves are based on many years of experience. ETS 6 secure reliability and provide a precise
More informationThermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFKH series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
More informationRefrigeration K-211. Replacement Parts. Chillers, Condensers. Compressors, Motors. Electrical. Components. Heating. Indoor Air Quality.
EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature systems with long refrigerant lines or
More informationCrankcase Pressure Regulating Valves
Crankcase Regulating Valves Crankcase Regulating Valves are designed to prevent overloading of the compressor motor by limiting the crankcase pressure to a predetermined maximum value during and after
More informationSteel Suction Line Accumulators
Steel Suction Line Accumulators U-Tube Style Accumulators VA, PA and VPA Series The U-tube accumulator design is a result of extensive laboratory testing of various designs. It takes into account essential
More informationSight glass (High pressure) Type SGP X, SGP I, SGP N, SGP RX, SGP RI and SGP RN
Sight glass (igh pressure) SGP X, SGP I, SGP N, SGP RX, SGP RI and SGP RN SGP are sight glasses for high pressure applications (Max. Working Pressure 52 bar / 754 psig). SGP is available with flare, solder
More informationTechnical brochure Electrically operated expansion valves, type ETS 6
MAKING MODERN LIVING POSSIBLE Technical brochure Electrically operated expansion valves, type ETS 6 With many years of experience the current range of Electronic Expansion Valves offers high reliability
More informationThermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFGD series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
More informationExpansion valves - 2 of 2
Expansion valves - 2 of 2 Contents Page Thermostatic expansion valves, type T 2 and TE 2 Introduction... 3 Features... 3 Technical data... 3 Superheat... 3 Ordering: Components with flare flare connection...
More informationThermostatic expansion valves type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves TGE 0, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants.
More informationThermostatic expansion valves type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves TGE 0, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants.
More informationSubcritical CO 2 Innovations
March 2011 / CATALOG 744 Subcritical CO 2 Innovations Energy Conscious Products & Solutions for Supermarkets Subcritical CO 2 Innovations Energy Conscious Products & Solutions for Supermarkets CATALOG
More informationHANDBOOK REGULATOR VALVES. Ed REGULATOR VALVES RP-ED 01/ ENG 1
HANDBOOK Ed. 2017 RP-ED 01/2017 - ENG 1 CHAPTER 2 CRANKCASE PRESSURE REGULATORS For refrigeration plants that use HCFC or HFC refrigerants shutter continues to open, until the stroke limit is reached and
More informationAIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT SANHUA Strive for perfection, Pursuit of excellence Sanhua is a leading HVAC&R manufacturer of controls and components with a global
More informationK-LINE. VS Replaceable Core Filter Driers
K-LINE VS Replaceable Core Filter Driers The 48 series of replaceable filter core driers is suited to liquid and suction line applications in a range of K-LINE VS Replaceable Core Filter Driers connection
More informationWEIGHT (lb) PART NO WITH ACCESS CONNECTION (ODS) BALL PORT DIAMETER WA WAS
SUPERIOR - BALL VALVES WA SERIES (WELDED) WAS Series (Welded with Access Fittings) Full Service Temperature Range of -40 F to +325 F. Forged Brass Body and Seal Cap. Design Working Pressure: 700 psig.
More informationThermostatic expansion valves PHT
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves PHT www.danfoss.com Contents Page Introduction........................................................................................
More informationPressure operated water valve Type WVFX and WVS
Data sheet Pressure operated water valve WVFX and WVS Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The
More informationMolecular Sieves Application Guide for the Natural Gas Industry Molecular Sieve Molecular Sieve Recommendations
Application Guide for the Natural Gas Industry Natural Gas / DG Natural Gas / EPG to less than 0.1 ppm(v) prior to liquefaction or Natural Gas liquids Extraction. to less than 0.1 ppm(v) while minimizing
More informationSelection & Application guidelines. Condensing Units 50 Hz - 1, 2, 4 cylinders R22 - R134a - R404A / R507 REFRIGERATION AND AIR CONDITIONING
Selection & Application guidelines Condensing Units 50 Hz - 1, 2, 4 cylinders R22 - R134a - R404A / R507 REFRIGERATION AND AIR CONDITIONING www.danfoss.com 50 HZ BLUESTAR PRODUCT PROGRAMME....... p 3 Product
More informationCapacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
More informationTechnical leaflet Thermostatic expansion valves with fixed orifice
MAKING MODERN LIVING POSSIBLE Technical leaflet Thermostatic expansion valves with fixed orifice Type TDE / TDEB www.danfoss.com Contents Page Introduction........................................................................................3
More informationInjection valve, type TXI 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Injection valve, type TXI 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Introduction Danfoss has developed a injection valve type TXI 2 for desuperheating in 2-stage refrigeration systems operating
More informationMAKING MODERN LIVING POSSIBLE. Solenoid valves Type EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Solenoid valves EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction... 3 Features... 3 Approvals... 3 Technical
More informationSOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FOR REFRIGERATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive
More informationSafety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
More informationHANDBOOK SOLENOID VALVES. Ed SOLENOID VALVES VS-ED 01/ ENG 1
HANDBOOK Ed. 2017 VS-ED 01/2017 - ENG 1 2 VS-ED 01/2017 - ENG TABLE OF CONTENTS CHAPTER 1 CHAPTER 2 CHAPTER 3 CHAPTER 4 CHAPTER 5 CHAPTER 6 CHAPTER 7 CHAPTER 8 CHAPTER 9 CHAPTER 10 CHAPTER 11 CHAPTER 12
More informationReplaceable filter shells VS Parker Sporlan K-Line
Replaceable filter shells VS K-Line 9 K-LINE VS replaceable filter shells ensure protection of refrigeration and air-conditioning systems from moisture, acids, and solid particles in liquid line or/and
More informationPHconnect. Trade Price Schedule
PHconnect What is PHconnect? PHconnect is Parker s on-line resource for its U.S.A. refrigeration and air conditioning wholesalers. PHconnect enables wholesalers to do the following via the internet: enter
More informationDANFOSS. Thermostatic Expansion Valves. Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A R-404A/
TYPE TUA(E), TUB(E), TUC(E), T(E)2, TDE, TDEB, TE, TXI 2, AKV Thermostatic Expansion Valves Valve Applications Features Models Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A
More informationHUDSON TECHNOLOGIES REFRIGERANTSIDE SOLUTIONS OTHER SERVICES PRODUCTS
HUDSON TECHNOLOGIES S Chiller dehydration & decontamination (online & offline) Refrigerant moisture reduction (online & offline) Rust and particulate reduction Hermetic burnout decontamination Residue
More informationPulse Width Modulation Valves. Models SPW-0 thru -7
November 2017 Bulletin / Bulletin 30-30 30-30 Page 1 Pulse Width Modulation s Models SPW-0 thru -7 Page 2 Bulletin 30-30 Pulse Width Modulation s For Refrigerant Flow Control in Direct Expansion HFC, HCFC
More informationA full line of field-tested CO 2 controls, stocked for your convenience
A full line of field-tested controls, stocked for your convenience 7000+ systems built with products www.danfoss.us/aftermarket Why choose for? has pioneered technologies for both transcritical and subcritical
More informationVTZ variable speed Reciprocating compressors
MAKING MODERN LIVING POSSIBLE Application guidelines VTZ variable speed Reciprocating compressors R404A, R507, R407C, R134a www.danfoss.com CONTENT VARIABLE SPEED COMPRESSORS... 4 Speed control...4 Advantages
More informationModulating liquid level regulators, direct-controlled SV 1 and SV 3
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, direct-controlled SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating,
More informationTable of Contents. 1. Model Designation And Unit Models Guide Specifications Technical Data Performance Data 10
Table of Contents Page No. 1. Model Designation And Unit Models 1 2. Features 2 3. Guide Specifications 4 4. Standard Unit Components 5 5. Technical Data 6 6. Performance Data 10 7. Electrical Data 19
More informationPROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily
More informationFully synthetic refrigeration oils based on special polyglycols (PAG) for R134a A/C systems. Advantages
Description Because of their Cl content, CFC refrigerants like R12 destroy the earth's ozone layer. This led all manufacturers to cease production of fully halogenized CFC's and introduce alternative products.
More informationThermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TCCE Series Application TCCE thermostatic expansion valve is used to regulate refrigerant flow into the evaporator, especially in applications
More informationPressure Control Type KPU
MAKING MODERN LIVING POSSIBLE Data sheet Pressure Control Type KPU KPU controls are designed for use in refrigeration and air-conditioning systems to protect the systems from excessively low suction or
More informationElectrically operated expansion valves, type ETS
MAKING MODERN LIVING POSSIBLE Technical brochure Introduction ETS is a series of electrically operated expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration
More informationSolenoid valves Type EVU for fluorinated refrigerants
Data sheet Solenoid valves EVU for fluorinated refrigerants EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied
More informationThermo -Expansion Valves Series TX7
Technical Bulletin TX7 series of Thermo -Expansion Valves are designed predominantly for AC, heat pumps, close control and industrial process cooling applications. The TX7 is ideal for those applications
More informationGEOlube RFL Range Product Data
GElube RFL Range Product Data GElube RFL Range TECHNICAL DATA SHEET North America 340 Mathers Road Ambler PA 19002 USA Tel: +1 215 773 9280 (Toll Free 888 519 3883) Fax:+1 215 773 9424 Europe Charleston
More informationElectrical Control Valves Series EX4, EX5, EX6, EX7 & EX8
Electrical Control s Series EX4, EX5, EX6, EX7 & EX8 Features Multifunction as expansion valve, hot gas bypass, suction gas throttling, head pressure, liquid level actuator etc. Fully hermetic design (no
More informationINSTALLATION, START-UP AND SERVICE INSTRUCTIONS
INSTALLATION, START-UP AND SERVICE INSTRUCTIONS P705 Refrigeration Condensing Units CONTENTS Page SAFETY CONSIDERATIONS...................... 1 INTRODUCTION.................................. 1 HANDLING.......................................
More informationQUICK SELECTION GUIDE
QUICK SELECTION GUIE HERMETIC FILTER RIERS TYPE FILTER RIER PGE RECOMMENE USE FUNCTION Liquid EK 209 CFC, HCFC, HFC Premium Universal Replacement Liquid K 22 CFC, HCFC High cid and Water Removal Liquid
More informationCartridge pressure switch Type CB
Data sheet Cartridge pressure switch Type CB Pressure controls CB series are compact disc type pressure switches with fixed set-points for long-standing use in refrigeration and air conditioning systems.
More informationSolenoid valves Type EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 DKRCCPDBB0A202-520H275 Danfoss A/S, 0-2006 Contents Page Introduction.......................................................................................
More informationCondensed Catalog 410A January 2008
CATALOG Page 1 Condensed Catalog January 2008 This condensed catalog contains product specifically for R- applications. By including a minimum of engineering information we are able to provide a concise
More informationSteel Suction Line Accumulators
"U" Tube Style Accumulators The Parker U tube accumulator design is a result of extensive laboratory testing plus detailed investigation of the various accumulators currently available. It takes into account
More informationOil separator Type OUB
ata sheet Oil separator OUB Oil separator type OUB is for use in all refrigeration plants where the compressor lubricating oil must be returned directly to the compressor oil sump under all operating conditions.
More informationA Critical Assessment of Synthetic Lubricant Technologies for Alternative Refrigerants
A Critical Assessment of Synthetic Lubricant Technologies for Alternative Refrigerants Dr. S.J. Randles Dr. S.J. McTavish Dr. T.W. Dekleva 2003 UNIQEMA Ltd, All rights reserved UNIQEMA is a trademark of
More informationShut-off valves in stainless steel SVA-S SS
Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationElectrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20
MAKING MODERN LIVING POSSIBLE Data sheet Electrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20 AKV are electrically operated expansion valves designed for refrigerating plants. The AKV
More informationHigh performance novel polyalkylene glycol lubricants for CO 2 based air conditioning/refrigeration systems
Shrieve Product Information Sheet ZERL RFL-EP Series High performance novel polyalkylene glycol lubricants for C 2 based air conditioning/refrigeration systems Introduction The refrigeration industry has
More informationISEL Refrigeration Fluids
ISEL Refrigeration Fluids Revenue by Product Line Revenue by Refrigeration Product Lubricants associated with the ammonia refrigeration industry make up >63% of the company s refrigeration lubricant sales
More informationHCYBF. Replaceable core oil filter shells Refrigeration & Climate Components Solutions. n Applications
Refrigeration & limate omponents Solutions 46.1 n Applications Oil filtering on the oil return line to the compressor sumps of high capacity refrigerating and air conditioning installations. These filters
More informationMT/MTZ 50 Hz R22 R407C R134a R404A / R507
Selection & Application guidelines RECIPROCATING COMPRESSORS MT/MTZ Hz R22 R47C R134a R44A / R7 1 CYLINDER 2 CYLINDERS 4 CYLINDERS 8 CYLINDERS Refrigeration and Air Conditioning Expect more from us DANFOSS
More informationElectric expansion valve Type AKV 10P, AKV 10PS
Data sheet Electric expansion valve Type AKV 10P, AKV 10PS AKV 10P and AKV10PS are electric operated expansion valves designed for refrigerating plants. The AKV 10P and AKV 10PS valves are normally controlled
More informationElectronic suction modulating valves type KVS
MAKING MODERN LIVING POSSIBLE Technical brochure Electronic suction modulating valves type KVS KVS is a series of electronic suction modulating valves for AC transport and refrigeration applications. Accurate
More informationF200 Series. Compressed Air and Gas Filters FEATURES. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades
F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction
More informationDetermination of the Performance, Leak Scenario, Flammability and Oil Return Characteristics of a Novel R22 Replacement
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 1998 Determination of the Performance, Leak Scenario, Flammability and Oil Return
More informationF200 Series. Compressed Air and Gas Filters. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades
F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction
More informationRCD Air Cooled Condensing Unit (50/60 Hz)
Environment friendly Easy to access components More efficient air cooled condenser coils Easy to install and maintain The Saudi Factory for Air Conditioning Units RCD Air Cooled Condensing Unit (50/60
More informationREFRIGERATION STRAINERS
REFRIGERATION STRAINERS AC & R OIL FILTER - POE OIL FILTER-DRIER S-4004 AC&R Components S-4004 Oil Filter removes foreign material from the oil as it passes through the filter. The filter easily captures
More informationStainless steel - the strong solution
MAKING MODERN LIVING POSSIBLE Stainless steel - the strong solution TU and TC thermostatic expansion valves REFRIGERATION & AIR CONDITIONING DIVISION TU / TC: superior by design and function The function
More informationManufactured in the USA in our ISO 9001 registered facility. All accumulators are UL listed (SA4835) and CSA approved (LR41494).
The Virginia KMP suction line accumulator's purpose is to prevent excessive quantities of liquid refrigerant and oil from returning to the compressor. This can result from periods of low demand, low ambient
More informationRefrigerating Engineers & Technicians Association. Industrial Refrigeration 1 Final Examination for Course Credit Supplemental Materials Package
Refrigerating Engineers & Technicians Association Industrial Refrigeration 1 Final Examination for Course Credit Supplemental Materials Package - June 1, 2007-1 Commonly Used Refrigerants Refrigerant Number
More information